A Six-Dye Staining Schedule for Sections of Mesquite and Other Desert Plants

Materials are fixed in FPA (formalin, 2; propionic acid, 1; 70% ethanol, 17). Paraffin sections on slides are brought to 50% ethanol and stained as follows: (1) in Bismarck brown Y, a 0.02% solution in 0.1% aqueous phenol, 10-30 min; wash 30 sec in 0.7% acetic acid, and wash in distilled water 20-30 sec; (2) in crystal violet, 1% in 70% ethanol alkalinized with 1 drop of 1 N NaOH per 100 ml, 12-35 min; wash 30-60 sec in tap water to remove excess stain, and rinse 0.5 sec in 70% ethanol; then mordant in I₂-KI, 1% each in 70% ethanol, 40 sec, and rinse in 70% ethanol 2-5 sec; (3) in a mixture containing 0.4% acid fuchsin and 0.6% crythrosin B in 70% ethanol about 0.5 sec; rinse in 70% ethanol 5-15 sec to remove excess red; dehydrate in 70%, 95%, and absolute ethanol, 2-3 sec each; (4) in fast green FCF, 0.5% in a mixture of equal parts of methyl cellosolve, absolute ethanol, and clove oil, 5-15 sec; rinse in a mixture of clove oil, 10 ml; absolute ethanol, 100 ml; and methyl cellosolve, 10 ml, 5-7 sec; (5) in orange G, 0.75 gm in a mixture of clove oil, 40 ml; absolute ethanol, 40 ml; and methyl cellosolve, 60 ml, 5-30 sec; rinse clean in a 1:1 mixture of xylene and absolute ethanol, 5-20 sec Complete the clearing in pure xylene, 3 changes, 1.5 min in each, and apply a cover glass with synthetic resin. Slides are agitated in all steps except Bismark brown Y, crystal violet, and the xylenes. Contrast and staining intensity are adjusted by varying staining times in the dye solutions.     

Basic Dye Counterstaining of Sections Impregnated by the Golgi-Cox Method

Celloidin blocks of Golgi-Cox impregnated material are cut at 50 μ, the sections collected in 70% alcohol, transferred to a 3:1 mixture of absolute alcohol and chloroform for 2 min, and then stored in xylene or toluene for at least 3 min, or up to 2 wk until processed further. Mounting is done on glass slides which have been coated with fresh egg albumen diluted in 0.2% ammonia water (or a 0.5% solution of dry powdered egg albumen) and then dried at 60°C overnight. For attachment to these coated slides, sections are first soaked for 2-3 min in a freshly prepared mixture of methyl benzoate, 50 ml; benzyl alcohol, 200 ml; chloroform, 150 ml; and then transferred quickly to the slides by means of a brush. After 2-3 min the chloroform evaporates and the celloidin softens. The slides are then immersed in toluene which hardens the celloidin and anchors the sections to the slides. Alcohols of descending concentrations to 40% are followed by alkalinizations, first in: absolute alcohol, 40 ml; strong ammonia water 60 ml, for 2 min, then in: absolute alcohol, 70 ml; strong ammonia water, 30 ml, for 1 hr. Excess alkali is then removed by 70% and 40% alcohol, 2 min each, and a 10 min wash in running tap water. Bleaching in 1% Na₂S₂O₃, for 10 min and washing again in tap water for 10 min completes the process preliminary to staining. The preparations are then stained for 90 min in an aqueous solution of either 0.5% cresylecht violet, neutral red, or Darrow red, buffered at pH 3.6. Dehydration and differentiation in ascending grades of alcohol, clearing with toluene or xylene, and applying a cover glass with a mounting medium having a refractive index of about 1.61 completes the process.     

Selective Staining of Protein and Starch in Wheat Flour and its Products

The main constituents of wheat flour and many wheat flour products are wheat protein (gluten) and starch granules. The specific staining of the protein present was effected by 10 min in 0.1% aqueous ponceau 2R (C.I. No. 16150) acidified with 3—4 drops of 1 N H₂SO₄ per 50 ml of staining solution, followed by rinsing in 2 changes of distilled water, dehydrating, clearing and mounting in a resinous medium in the normal way. Staining of starch was as follows: sections or flour smears were brought to water, treated for 10 min in a protein-blocking reagent (Taninol ADR—Imperial Chemical Industries—used in 1% aqueous solution) rinsed, then stained for 3 mins in 0.5% aqueous chlorazol violet R (C.I. No. 32445) or for 10 min in either 0.5% aqueous chlorazol violet N (C.I. No. 22570), or chlorazol black E (C.I. No. 30235). Staining was followed by thorough rinsing, normal dehydration and clearing and mounting in a medium of R.I. about 1.49 to enhance visibility of unstained starch grains. The methods are applicable to flour smears, cryostat and wax sections.     

Staining Plant Tissues with Chlorazol Black E and Pianese III-B

The staining schedule was developed for a study of the mycorrhizae of red pine, Pinus resinosa Ait. From 70% alcohol, sections are stained in a saturated solution of chlorazol black E in 70% alcohol, 10-30 min; free dye removed by washing in 95% alcohol; stained 18-24 hr in Pianese III-b; rinsed in 95% alcohol, acidified by the addition of 2 ml of saturated aqueous picric acid per 100 ml, 3-4 changes or until the last change is pale yellow or light green; and rinsing in 95% alcohol to remove the acid. If the acid fuchsin is too intense, a cautious differentiation with 95% alcohol containing 1-3% of a 0.1 N solution of NaOH is made. If too much chlorazol black is removed, the effect can be compensated by overstaining with this dye at the beginning of the process. Sections are dehydrated, cleared, and covered in the usual manner. This stain has applications to plant tissues generally, and is particularly effective for meristematic tissues. It shows details of cytoplasmic structures and gives sharp delineation of primary cell walls.     

Use of Gallocyanin as a Myelin Stain for Brain and Spinal Cord

Tissue fixed in 10% formalin, formol saline, CaCO₃ or phosphate buffer neutralized formalin, Baker's formol calcium, Cajal's formol ammonium bromide, formalin-95% ethanol 1:9, formalin-methanol 1:9, Lillie's methanol-chloroform or Salthouse's formol cetyltrimethylammonium bromide was dehydrated and embedded in paraffin. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 22-25 C. Mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. Myelin was stained in a gallocyanin self-differentiating solution for 1-2.5 hr; thick sections requiring the longer time. The staining solution (pH approximately 7.4) consisted of Na₂CO₃, 90 mg; distilled water, 100 ml; gallocyanin, 250 mg; and ethanol, 5 ml. The ethanol was added to this mixture last, and after the other ingredients had been boiled and then cooled to room temperature. After a staining and thorough washing, Nissl granules were stained for 5-10 min in a solution consisting of: 0.1 M acetic acid, 60 ml; 0.1 M sodium acetate, 40 ml; methyl green, 500 mg. Washing, dehydration, clearing and mounting completed the process. Myelin sheaths were stained dark violet; neuronal nuclei, light green with dark granules of chromatin; nucleoli of motor cells and erythrocytes, dark violet; cytoplasm, green with dark green Nissl granules. The simple and reliable method can be adapted easily for use with automatic tissue processors.     

A Universal Stain for the Sex Chromatin Body

For the demonstration of the sex chromatin body in human tissues, fixation in 95% alcohol or modified Davidson's solution (95% alcohol, 30; formalin, 20; glacial acetic acid, 10; distilled water, 30) was best. The staining procedure chosen for most materials is the following: Mounted preparations are coated with celloidin, hydrated, hydrolyzed 20 min in 52V HCl at 20-25°C, rinsed thoroughly in several changes of distilled water and transferred to a buffered thionin solution. This consists of 3 parts: (1) A saturated solution of thionin in 50% alcohol (filtered); (2) Michaelis buffer: sodium acetate (3 H₂O), 9.714 gm; sodium barbiturate, 14.714 gm; CO₂-free distilled water, 500 ml; and (3) 0.1N HCl. To make the staining solution, mix 28.0 ml of the buffer solution with 32.0 ml of 0.1N HCl and bring the total volume to 100.0 ml with the thionin solution. Its pH should be 5.7 × 0.2, and care should be exercised that no acid is carried over from the hydrolyzing solution, since this would progressively lower the pH. The staining time varies from 15 to 60 min, depending on the specimen, but the shortest time consistent with adequate staining gives the clearest preparations. Slides are rinsed in distilled water and 50% alcohol and allowed to remain in 70% alcohol until the heavy clouds of stain cease to appear. Differentiation is completed in 80% and 95% alcohol, followed by dehydration in absolute alcohol, clearing in xylene and applying a cover glass with a synthetic resin (G. T. Gurr's DePeX was used). The sex chromatin is deep blue-violet and sharply contrasted against the lightly colored particulate chromatin of the nucleus. Cytoplasm remains unstained but fibrin and related structures show metachromasia. Chromosomes are well demonstrated if present. The method works on all types of tissues, is simpler and quicker than the Feulgen method, and often yields superior results.     

Darrow Red, A New Basic Dye

A new red basic dye, which has specificities similar to blue basic dyes and which exhibits metachromasia, has been named Darrow red, and is now commercially available. In a staining solution, prepared as indicated, it is stable for about 1 mo. Procedure: Dissolve 50 mg of Darrow red in 200 ml of 0.2 M acetic acid. Boil gently for 10 min; cool and filter. Stain frozen sections or decerated and hydrated mounted paraffin sections 20-30 min. Differentiate and dehydrate rapidly in 50, 70 and 95% ethyl alcohols followed by n-butyl alcohol, xylene and covering in synthetic resin.     

A Tribasic Stain for Thin Sections of Plastic-Embedded, OsO4-Fixed Tissues

Thin (0.5-1 μ) sections of plastic-embedded, OsO₄-fixed tissues were attached to glass slides by heating to 70 C for 1 min. A saturated solution combining toluidine blue and malachite green was prepared in ethanol (8% of each dye) or water (4% of each dye). Methacrylate or epoxy sections were stained in the ethanol solution for 2-5 min. The water solution was more effective for some epoxy sections (10-80 min). Epoxy sections could be mordanted by 2% KMnO₄, in acetone (1 min) before use of the aqueous dye, reducing staining time to 5-10 min and improving contrast. Aqueous basic fuchsin (4%) was used as the counter-stain in all cases; staining time varied from 1-30 min depending upon the embedding medium and desired effects, methacrylate sections requiring the least time. In the completed stain, nuclei were blue to violet; erythrocytes and mitochondria, green; collagen and elastic tissue, magenta; and much and cartilage, bright cherry red. Sections were coated with an acrylic resin spray and examined or photographed with an oil-immersion lens.     

A Basic Fuchsin and Alkalinized Methylene Blue Rapid Stain for Epoxyembedded Tissue

Sections 1 μ thick of epoxy-embedded, OsO₄-fixed tissues were stained with 4% aqueous basic fuchsin at 70 C for 1 min, rinsed well and destained, also at 70 C, for 1 min. A 2% aqueous methylene blue solution, alkalinized to pH 12.5 by mixing 1 N NaOH with the dye on the slide in the proportion of about 2:1, was then allowed to act for 2 min at 23-27 C. The stain was rinsed off the slide, and the preparation air dried before applying a mounting medium and cover glass. The mounting medium consisted of immersion oil sealed with epoxy household cement. Stains had not faded after 1 yr. The method is simple, rapid (total time 4-5 min), and provides sharp contrast between cellular and connective tissue components.     

Staining Mitochondria in Saccharomyces cerevisiae

After testing various procedures (amidoblack 10B, acid fuchsin-methyl blue, Luxol fast blue MBS-phloxine, toluidine blue O, Jams green B and pinacyanol), three stains can be recommended for staining both types of mitochondria (globose and threadlike) in the cells of Saccharomyces cerevisiae: (1) 0.1% solution of amidoblack 10B in citrate buffer (pH 3.0) for 10 min; (2) 0.01% solution of toluidine blue O in phosphate buffer (pH 6.0) for 30 min; (3) 0.01% solution of Janus green B in distilled water (pH 5.6) for 30 min. The latter stain is most specific because its staining reaction depends upon the action of the mitochondrial enzyme cytochrome c oxidase. Yet, low concentrations and short incubation periods must be applied to avoid poisoning of the cell metabolism.     

Differential Staining of Mucin Granules from Epoxy Resin Sections by a Phosphotungstic Acid-Methyl Green Procedure

After treatment of epoxy resin semithin sections from glutaraldehyde fixed rat large intestine with 5% aqueous phosphotungstic acid (PTA), staining with unpurified 0.2% solutions of methyl green at 60 C for 5 min produces a color differentiation between mucin granules of goblet cells. Some mucin granules and the glycocalyx appear deep green while the remaining granules, luminal mucin and collagen fibers are pink. The known contamination of unpurified methyl green with crystal violet seems to be responsible for the pink staining reaction of the latter structures, which also present an orange-red fluorescence under green exciting light. Electron microscopic observations show selective contrast of mucin granules which appear with a different amount of PTA deposits. This procedure is useful to reveal the heterogeneity of mucin granules in light and electron microscopy.     

Cold and Chemical Pretreatments to aid Chromosome Counts in a Grass Leaf Squash Technique Incorporating Hot Pectinase Maceration

Leaf buds, comprising the basal 3-5 mm of the youngest leaves attached to short stems, were dissected out of fast-growing young tillers of certain grasses, including Festuca, Lolium and Phalaris spp. and various hybrids. They were kept overnight in distilled water at 0-2 C, treated in a mixture of equal parts by volume of saturated aqueous solutions of 5,7-dibromo-8-hydroxyquinoline containing a surfactant (Tween 80), and 1-bromo-naphthalene for 3-4 hr at 0-2 C, and fixed in Newcomer's fluid. The rinsed samples were hydrolysed in 1 N HCl for 8 min at 60 C and Feulgen stained for 1 hr. After rinsing, the buds were macerated in a filtered 3% solution of Pectinol 100-D (Rohm and Haas) in 0.1 M acetate buffer at pH 4.5 for 10 min at 60 C. Squashes were made in 45% acetic acid. The combined cold and chemical pretreatments resulted in strongly contracted, easily counted metaphase chromosomes, while intact cells with full chromosome complements were more readily retained during squashing after enzyme maceration at 60 C than at room temperature.     

Differential Staining Of Tissue In The Block With Picric Acid And The Feulgen Reaction

The authors have found a modification of the Feulgen reaction to be a satisfactory stain for tissue in the block.

Pieces of fresh mammalian tissue not thicker than 5 mm. are fixed for approximately 48 hours at 25° C. in a mixture of equal parts of 5% aqueous sulfosalicylic acid and saturated aqueous picric acid. They are washed for 30 minutes in three ten-minute changes of distilled water and placed in Feulgen's staining solution diluted to one-half strength with distilled water. The staining solution is allowed to act for 24 hours (2 to 3 mm. thick blocks) up to 48 hours for 5 mm. thickness. After staining, the specimens are transferred to a mixture of sodium bisulfite, 0.5 g. and N hydrochloric acid, 5 ml. in' 100 ml. of distilled water. Two changes of IS to 30 min. each in the acid sulfite are given and these are followed by dehydration through 50%, 70% and 95% alcohol. One to two hours are allowed for each change except the last 95%, in which the stained tissue is allowed to remain overnight. The dehydration is completed in two changes of absolute alcohol with subsequent clearing in xylene and embedding in paraffin. Sections may be cut 10 μ or other thickness desired, mounted on slides, paraffin removed, and covered in the usual manner. Nuclei stain reddish violet against a lemon yellow background when the stain is typical. Orange G, 200 mg. per 100 ml. may be added to the fixing fluid if a more polychromatic effect is desired.     

Cytochemical Staining of Sections from Plastic-Embedded Flagellates

Dinoflagellate chromosomes in sections of plastic-embedded cells were stained without removing the plastic. Azur B and Feulgen procedures were used to localise DNA. Azur B was used with Araldite or methacrylate sections by staining in 0.2% stain in 0.05 M citrate buffer at pH 4 for 1 hr at 50 C followed by rinsing in tertiary butyl alcohol to differentiate the chromosomes. Feulgen stain was used with Araldite sections by hydrolyzing in 1 N HCl at 60 C for 10 min, rinsing in water, staining for 24 hr, washing well, drying and covering. Fast green was used with methacrylate sections to stain proteins by flooding the slide with a 0.1% solution of stain in 0.06 M phosphate buffer at pH 8, allowing the stain to dry out at 40-50 C, washing well, drying and covering. Controls were carried out on material fixed in formalin and treated with nucleases or proteolytic enzymes prior to embedding, and staining.     

Use of acridine orange for histologic analysis of the central nervous system

The application of the fluorescent dye acridine orange (AO) to the staining of histologic sections of the brain, and its use for automatic cyto- and histophotometric evaluation are described and compared with the results obtained using cresyl violet. The most suitable procedure for aldehyde-fixed brain tissue, embedded in paraffin and sectioned at 5 micron, proved to be treatment of the sections with an aqueous solution of AO (1:50,000) at pH 1.2 for 30 min, followed by rinsing in distilled water for 10 min. This procedure revealed the morphology in a highly acceptable manner, clearly differentiating various cell components; its characteristics included exact reproducibility and high contrast. The degree of fading was calculable, with a very gradual decrease in fluorescent intensity. The AO procedure appears to be compatible with most other staining procedures that do not rely on the same binding mechanisms. Thus, AO staining has two advantages over the classical cytoarchitectural staining methods: first, it is more suitable for automated morphometric analysis, and second, it can be used in conjunction with immunologic and other techniques.     

Enhanced Differentiation of Zaprionus Chromosomes by Prestaining Acid Hydrolysis

Two variations of orcein staining have been adapted to salivary gland chromosomes of Zaprionus. Method I: after dissection, glands are transferred to 1 N HCl at 60° C for 5 min, stained with 2.5% orcein in 60% acetic add for 15-20 min, and squashed in 60% acetic acid. Method II: after dissection, glands are transferred to 1 N HCl at 60° C for 5 min, transferred to a saturated solution of carmine in 45% acetic acid for 1 min, then to a mixture of 50 ml of 1% orcein in concentrated lactic acid and 50 ml of 30% acetic add for 5 min. They are squashed in the same mixture. The unproved differentiation of chromosomes from cytoplasm is attributed to the removal of cytoplasmic ribonucleic add by add hydrolysis.     

An Improved Method of Decalcification

Following several experimental investigations, an improved method of decalcification has been devised. The principle of this decalcification method is to obtain complete decalcification by a mixture of as high pH as possible without diminishing the stainability of the Nissl-granules (with Einarson's progressive staining method by means of gallocyanin). This is accomplished by the help of a buffer solution of equal parts of 8 N formic acid and 1 N sodium formate (pH 2.2). After-treatment consists only in rinsing in flowing water for 24 hours. Dehydration is in alcohol (70%, 96%, 100%); cedar oil; ligroin. Embedding in paraffin follows.     

A Tri-Basic-Dye Stain for Nerve Cells

A new staining method has been developed for the study of nerve cells and Nissl granules which combines three basic dyes, cresylecht violet, toluidine blue and thionin. The use of this tri-basic-dye stain results in finished preparations that are critically stained and permanent. Paraffin sections (4 μ sections preferably) are mounted on slides by the starch medium, deparaffinized and stained by the tribasic staining solution. After differentiation in acidified distilled water, sections are dehydrated, returned to stain solution and again dehydrated, then cleared and mounted in Clarite. Various vertebrate material including normal and pathological human tissues have been stained with this triple dye solution. Especially for pathological material, re-immersion of slides in the staining and 80% alcohol solutions before mounting, differentially intensifies the staining reaction. Fixatives used were 10% formalin, 95% alcohol, Bouin and formalin-Bouin (10% formalin followed by Bouin).     

Simplified Aldehyde-Fuchsin Staining of Neurosecretory Cells

Gomori's original aldehyde-fuchsin method has been modified by the combination of Halmi's counter stain with Gabe's preparation, consisting of basic fuchsin, 1 gm; boiling water, 200 ml; with HC1, 2 ml and paraldehyde, 2 ml added after cooling and filtering. The solution so made was allowed to ripen 3-4 days at room temperature, and the precipitate which formed was filtered off and dried at 55-60°C. The staining solution consisted of 0.5 gm of the dry precipitate dissolved in 100 ml of 70% alcohol. The staining follows original procedures except that it is very important to bring slides from water to 70% alcohol before placing them in the aldehyde-fuchsin solution and also to remove all excess staining solution by rinsing in 95% alcohol after staining. The staining solution is stable for at least 6 mo.     

Gram staining and lectin binding properties of Myxosporea and Sporozoea

The staining method developed by Christian Gram was introduced as a simple and highly selective tool for demonstrating myxosporean and coccidian sporogonic stages. When using standard blood staining procedures for those enigmatic parasites it is sometimes difficult to distinguish them from fish host tissue. They clearly exhibit a partial Gram-positive reaction in histological sections, but staining is variable in air dried fish organ imprints. To visualize the Gram-negative background of different host tissue components in histological sections, the conventional safranin counterstain of the Gram protocol may be modified as follows: after application of 2% crystal violet (basic violet 3) and Lugol's solution, sections are stained with 0.1% nuclear fast red-5% aluminum sulfate and 0.35% aniline blue (acid blue 22) dissolved in saturated aqueous picric acid. Replacement of the Gram-specific dye crystal violet with 2% malachite green gave similar results in organ imprints containing myxospores or coccidia, but only in sections containing myxosporea. Staining for 1 min with an aqueous solution of 0.5% malachite green and followed 1 min washing was sufficient for rapidly demonstrating the parasite spores in organ imprints of both myxosores and oocysts. With regard to the role of acid mucopolysaccharides and other carbohydrates in the Gram reaction of spores, alcian blue 8GX staining was compared to the binding of FITC-labeled WGA, GS I and GS II. Each lectin was applied at 20 μl/ml PBS, HEPES for 1 hr. Whereas WGA yielded a nonspecific pattern like the alcian blue staining, GS II resulted in a pattern similar to the Gram staining results. This binding was weak in untreated specimens, but was significantly enhanced when digested first within trypsin overnight in a humid chamber at 37 °C. The binding of GS II to both myxosporidian and coccidian spores suggests that they are both composed of polymers containing N-acetyl-D-glucosamine residues. Furthermore, the results suggest that this hexosamine plays a key role in the Gram reaction.