Initiation of lagging-strand synthesis for pBR322 plasmid DNA replication in vitro is dependent on primosomal protein i encoded by dnaT

The role of the primosome assembly and protein n' recognition site in replication of pBR322 plasmid was examined. The following evidence indicates that the primosome is involved in lagging-strand synthesis of pBR322 plasmid replication in vitro. Early replicative intermediates with newly synthesized leading strand, approximately 1 kilobase pair long, immediately downstream of the replication origin accumulate in products synthesized in extracts from a dnaT strain that lacks primosomal protein i or in wild-type extracts supplemented with anti-protein i antibody. These intermediates are converted efficiently into full-length DNA by addition of purified protein i. Consistent with the previously proposed role of the primosome (Arai, K. and Kornberg, A. (1981) Proc. Natl. Acad. Sci. U. S. A. 78, 69-73), an n' site on the lagging strand, but not on the leading strand, is required for efficient replication of the plasmid in vitro. Plasmids lacking an n' site on the lagging strand replicate only to a limited extent in vitro and early replicative intermediates carrying nascent leading strands are accumulated, although a portion of the intermediates complete replication to yield full-length DNA. The latter reaction is completely inhibited by addition of anti-protein i antibody. Insertion of the n' site of phage phi X174 into pBR322 plasmids lacking lagging-strand n' sites restores the replicative ability of the mutant plasmid comparable to that of the wild-type plasmid. These results indicate that protein i is essential for lagging-strand synthesis of pBR322 plasmid in vitro and that it may play an important role in the priming events as a part of either an n' site-dependent primosome or an n' site-independent, as yet unidentified, priming complex.     

Replication of plasmid chimera pBR-mtB-A containing rat liver mtDNA fragment in Escherichia coli polA cells

Escherichia coli K-12 strains p108 (polA6), p3478 (polA1), and KS55 (polA12, ts) deficient in DNA polymerase I were transformed by recombinant pBR-mtB-A plasmid containing BamHI-A fragment of rat liver mtDNA and pBR322 plasmid. The physical map of the pBR-mtB-A, containing the recognition sites for SalI, EcoRI and HinIII endonucleases, was constructed and the orientation of mtDNA fragment joined to pBR322 plasmid was studied. The phenotypic selection using ampicillin containing medium at permissive and nonpermissive temperature (KS55 strain), or at 37 °C (polA6 and polA1 strains) revealed that only the cells transformed with the hybrid plasmid are able to grow under these conditions. The presence of mtDNA insertions in chimeric DNA molecules of pBR-mtB-A in polA strains was proved by electrophoretic and hybridization analysis. Thus the results obtained demonstrate the replication of the vehicle containing both plasmid replicon and mitochondrial origin in the conditions nonpermissive for the stable reproduction of the plasmid DNA alone.     

The nucleotide sequence of the replication origin beta of the plasmid R6K

We h ave identified by molecular cloning a region of 283 base pairs of the HindIII 2 fragment of R6K which corresponds to the region of the replication origin beta. This 283 base-pair DNA fragment, when present contiguously with the structural gene for the replication initiation protein of R6K, encoded in the HindIII 9-15 and part of HindIII 2 restriction fragments, will support the replication of a plasmid chimera containing the pBR322 replicon in a pol Ats host at the nonpermissive temperature. The nucleotide sequence of the region of replication origin beta has been determined. The nucleotide sequence has some homology with the ori gamma region of R6K; it has a 15-base-pair homology with the replication origin of Escherichia coli.     

Effects of genes exerting growth inhibition and plasmid stability on plasmid maintenance.

Plasmid stabilization mediated by the parA+ and parB+ genes of the R1 plasmid and the ccd+ and sop+ genes of the F plasmid was tested on a mini-R1 plasmid and a pBR322 plasmid derivative. The mini-R1 plasmid is thought to be unstably inherited owing to a low copy number and to random segregation of the plasmid at cell division, whereas cells harboring the pBR322 derivative used in this work are lost through competition with plasmid-free cells, mainly as a result of the shorter generation time of cells without plasmids. The pBR322 derivative carries a fusion between part of the atp operon of Escherichia coli and the bacteriophage lambda pR promoter, and the cI857 repressor gene. The insertion of sop+ from the F plasmid or parB+ from the R1 plasmid reduced the loss frequency by a factor of 10(3) for the pBR322 derivative and by at least a factor of 10(2) for the mini-R1 plasmid. Insertion of parA+ from the R1 plasmid decreased the loss frequency of the pBR322 derivative by a factor of 10 and that of the mini-R1 plasmid by a factor of 50. When ccd+ from the F plasmid was inserted, the loss frequency of the pBR322 derivative was decreased by a factor of 10, but it had only a marginal effect on the stability of the mini-R1 plasmid. In no case was any significant structural instability of the plasmids observed.     

Rifampicin-induced replication of the plasmid pBR322 in Escherichia coli strains carrying dnaA mutations

The replication pattern of the plasmid pBR322 was examined in the dnaA mutants of Escherichia coli. The rate of pBR322 DNA synthesis is markedly decreased after dnaA cells are shifted to the restrictive temperature of 42 degrees C. However, addition of rifampicin (RIF) to cultures of dnaA strains incubated at 42 degrees C after a lag of 90 min results in a burst of pBR322 synthesis. This RIF-induced pBR322 replication remains dependent on DNA polymerase I activity. Efficient plasmid pBR322 replication is observed at 42 degrees C in the double mutant dnaA46cos bearing an intragenic suppressor of dnaA46. Though replication of pBR322 in dnaA46cos growing at 42 degrees C is initially sensitive to RIF plasmid synthesis is restored after 90 min incubation in the presence of the drug. RIF-induced replication of the plasmid pBR327, lacking the rriB site implicated in RIF-resistant synthesis of the L strand of ColE1-like plasmids (Nomura and Ray 1981; Zipursky and Marians 1981), was observed also in dnaA46 at 42 degrees C.     

Retrovirus-mediated insertional mutagenesis: phagemid rescue of flanking DNA by selecting plasmid ori

A method for screening recombinant lambda libraries was devised to select phage containing genomic regions containing provirus insertions of retroviruses that carry the kanamycin and G418 resistance factor neo and the origin of replication derived from pBR322 (oripBR). Such recombinants are phagemids, able to replicate as bacteriophages or as plasmids under lambda repressor control. lambda repressor was cloned into a plasmid derived from pSC101 that is compatible with pBR322-derived phagemids. A strain carrying this plasmid may be used to select phagemids derived from a single proviral insertion with 100% efficiency from complex recombinant libraries. Homologous recombination between proviral long terminal repeats was observed at a rate of 10(-4)/plaque-forming unit in recABC+ strains. Despite this frequency, intact phagemids are easily recovered as phage after temperature shift to 42 degrees C. Since oripBR itself is a selectable marker in this system, the method could be applied to recover any sequence carrying the ori sequence from pBR322.     

Increased expression of the dnaA gene has no effect on DNA replication in a dnaA+ strain of Escherichia coli

We have constructed a pBR322 plasmid derivative which expresses dnaA protein under the control of the E. coli lac UV5 promotor. Expression of the dnaA protein from the plasmid is inducible by isopropyl-beta-D-thiogalactoside. In a dnaA+ strain induction has no effect on the accumulation of DNA. In contrast, in a thermosensitive dnaA46 strain, induction, at either the permissive or the nonpermissive temperature, results in an immediate stimulation of DNA accumulation. We conclude that, while in a dnaA46 strain dnaA protein limits DNA replication, in a dnaA+ strain dnaA protein activity does not control the timing of replication initiation.     

A model for regulation of ColE1-like plasmid replication by uncharged tRNAs in amino acid-starved Escherichia coli cells

It has been previously observed that various ColE1-like plasmids replicate differentially in Escherichia coli cells during the relaxed response to amino acid starvation. Here we develop a kinetic model to explain these observations based on the possibility of interaction of the 3' CCA-OH sequence with the UGG triplets in loops of RNA I and RNA II encoded by ColE1-like plasmids. According to our model, when the interaction of uncharged CCA with RNA I is possible, the replication of the ColE1-like plasmid is affected by differences in the concentration of various tRNAs in the starved cell, but it is not affected by the tRNA concentration if the hypothetical pairing occurs between the CCA-OH and RNA II. Using the previously determined parameters for the pBR322 plasmid, the concentration of uncharged tRNAs in the amino acid starved relaxed strains and the assumed efficiency of binding of tRNA and RNA I, we show that our model explains the differences in pBR322 copy number in the relaxed strain starved for several amino acids.     

n' Protein activator sites of plasmid pBR322 are not essential for its DNA replication

The lagging strand DNA synthesis of the Escherichia coli bacterial chromosome and plasmids is thought to be initiated by the mobile promotor, the primosome. This primosome is assembled at a specific site on single-stranded DNA. This process is initiated by the interaction of one of the at least seven components, the n' protein, with this site. Indeed n' protein activator sites are found in the plasmids Col E1 and pBR322. To investigate the in vivo function of these n' protein sites, deletion derivates of pBR322 were constructed in which the n' protein sites are removed. The deletion plasmids show no change in stability and only threefold reduction in copy number compared to pBR322. Using a transduction system for single-stranded plasmid DNA it was shown that no other specific initiation signals for lagging strand DNA synthesis were present in the deletion plasmids. It was concluded that the n' protein activator sites in pBR322 are not essential for its DNA replication in vivo.     

The region controlling the thermosensitive effect of plasmid Rts1 on host growth is separate from the Rts1 replication region.

Rts1 is a high-molecular-weight (126 x 10(6)) plasmid encoding resistance to kanamycin. It expresses unusual temperature-sensitive phenotypes, which affect plasmid maintenance and replication, as well as host cell growth. We have cloned the essential replication region of Rts1 from pAK8, a smaller derivative which is phenotypically similar to Rts1. Restriction endonuclease digests of isolated pAK8 deoxyribonucleic acid were allowed to "self-ligate" (ligation without an additional cloning vector) and subsequently were used to transform Escherichia coli strain 20SO to kanamycin resistance. Screening of these strains for the phenotypes of thermosensitive host growth and temperature-dependent plasmid elimination demonstrated that these two properties were expressed independently. Furthermore, it was shown that the Rts1 replication locus per se is not necessarily responsible for altered host growth at the nonpermissive temperature. The kanamycin resistance fragment of pAK8 was also cloned into pBR322. Electrophoretic analysis of BamHI restriction enzyme digests of this plasmid and similar digests of an Rts1 miniplasmid has allowed the identification of an 18.6-megadalton fragment carrying the replication locus and a 14.1-megadalton fragment carrying the kanamycin resistance gene.     

A 140 base-pair DNA segment from the kanamycin resistance region of plasmid R1 acts as an origin of replication and promotes site-specific recombination

A 140 base-pair DNA segment situated just upstream of the kanamycin resistance gene of transposon Tn2350, a transposon carried by the plasmid R1, was found to act as an origin of replication and allow autonomous replication of a plasmid composed only of the segment and of the tetracycline resistance gene of pBR322. This segment also promotes site-specific recombination: when cloned in pBR322 it promotes multimer formation in a recA- strain. If two copies are cloned on the same plasmid they promote either deletion or inversion of the intervening region, depending on their orientation relative to each other. DNA gyrase seems to be involved in this process since the inversion rate, in a plasmid carrying sequences in opposite orientations, varies in different nalidixic acid-resistant strains (gyr A mutants) independently isolated.     

Intergeneric transfer and exchange recombination of restriction fragments cloned in pBR322: a novel strategy for the reversed genetics of the Ti plasmids of Agrobacterium tumefaciens

Transmission of ColE1/pMB1-derived plasmids, such as pBR322, from Escherichia coli donor strains was shown to be an efficient way to introduce these plasmids into Agrobacterium. This was accomplished by using E. coli carrying the helper plasmids pGJ28 and R64drd11 which provide the ColE1 mob functions and tra functions, respectively. For example, the broad host-range replication plasmid, pGV1150, a co-integrate plasmid between pBR322 and the W-type mini-Sa plasmid, pGV1106, was transmitted from E. coli to A. tumefaciens with a transfer frequency of 4.5 x 10(-3). As pBR322 clones containing pTiC58 fragments were unable to replicate in Agrobacterium, these clones were found in Agrobacterium only if the acceptor carried a Ti plasmid, thus allowing a co-integration of the pBR322 clones with the Ti plasmid by homology recombination. These observations were used to develop an efficient method for site-specific mutagenesis of the Ti plasmids. pTiC58 fragnents, cloned in pBR322, were mutagenized in vitro and transformed into E. coli. The mutant clones were transmitted from an E. coli donor strain containing pGJ28 and R64drd11 to an Agrobacterium containing a target Ti plasmid. Selecting for stable transfer of the mutant clone utilizing its antibiotic resistance marker(s) gave exconjugants that already contained a co-integrate plasmid between the mutant clone and the Ti plasmid. A second recombination can dissociate the co-integrate plasmid into the desired mutant Ti plasmid and a non-replicating plasmid formed by the vector plasmid pBR322 and the target Ti fragment. These second recombinants lose the second plasmid and they are identified by screening for the appropriate marker combination.     

Replication and segregation of a miniF plasmid during the division cycle of Escherichia coli.

Replication of the miniF plasmid pML31 was examined during the division cycle of Escherichia coli growing with doubling times between 40 and 90 min at 37 degrees C and compared to the replication of plasmid pBR322 and the minichromosome pAL70. The replication pattern of pML31 was indistinguishable from that of pBR322 at all growth rates and very different from the cell-cycle-specific replication of the minichromosome. It is concluded that both pML31 and pBR322 plasmids can replicate at all stages of the division cycle, with a probability of replication that increases gradually, but perhaps not exponentially, during the cycle. In contrast, the modes of segregation of pML31 and pBR322 plasmids into daughter cells at division appeared to differ, raising the possibility that pML31 may segregate in a nonrandom fashion similar to that of chromosomes and minichromosomes.     

Construction of a hybrid plasmid capable of replication in the bacterium Escherichia coli and the cyanobacterium Anacystis nidulans.

A hybrid plasmid was constructed between the 5.3-megadalton plasmid (pUH24) of Anacystis nidulans R2 and the Escherichia coli plasmid pBR322. This was accomplished by adding a transposon to pBR322 and transforming this DNA into A. nidulans. One resultant hybrid, pLS103, had a molecular weight of 6.8 x 10(6), replicated in both organisms, had unique sites for two restriction endonucleases, conferred ampicillin resistance on both organisms, and could be used as a cloning vector in A. nidulans.     

The incompatibility product of IncFII R plasmid NR1 controls gene expression in the plasmid replication region.

The incompatibility properties of IncFII R plasmid NR1 were compared with those of two of its copy number mutants, pRR12 and pRR21. pRR12 produced an altered incompatibility product and also had an altered incompatibility target site. The target site appeared to be located within the incompatibility gene, which is located more than 1,200 base pairs from the plasmid origin of replication. The incompatibility properties of pRR21 were indistinguishable from those of NR1. Lambda phages have been constructed which contain the incompatibility region of NR1 or of one of its copy mutants fused to the lacZ gene. In lysogens constructed with these phages, beta-galactosidase was produced under the control of a promoter located within the plasmid incompatibility region. Lysogens containing prophages with the incompatibility regions from pRR12 and pRR21 produced higher levels of beta-galactosidase than did lysogens containing prophages with the incompatibility region from the wild-type NR1. The introduction into these inc-lac lysogens of pBR322 plasmids carrying the incompatibility regions of the wild-type or mutant plasmids resulted in decreased levels of beta-galactosidase production. For a given lysogen, the decrease was greater when the pBR322 derivative expressed a stronger incompatibility toward the plasmid from which the fragment in the prophage was derived. This suggested that the incompatibility product acts on its target to repress gene expression in the plasmid replication region.     

Rifampin-resistant replication of pBR322 derivatives in Escherichia coli cells induced for the SOS response.

Replication of plasmid pBR322 in Escherichia coli cells normally requires RNA synthesis and thus is sensitive to rifampin, an inhibitor of RNA polymerase. In cells induced for the SOS response, however, derivatives of pBR322 were found to replicate in the presence of rifampin. This rifampin-resistant replication of pBR322 requires the insertion of certain sequences of DNA. The replication depends on recF+ and DNA polymerase I.     

Requirement of the Escherichia coli dnaA gene function for ori-2-dependent mini-F plasmid replication.

The mini-F plasmids pSC138, pKP1013, and pKV513 were unable to transform Escherichia coli cells with a dnaA-defective mutation under nonpermissive conditions. The dnaA defect was suppressed for host chromosome replication either by the simultaneous presence of the rnh-199 (amber) mutation or by prophage P2 sig5 integrated at the attP2II locus on the chromosome, both providing new origins for replication independent of dnaA function. The dnaA mutations tested were dnaA17, dnaA5, and dnaA46. dnaA5 and dnaA46 are missense mutations. dnaA17 is an amber mutation whose activity is controlled by the temperature-sensitive amber suppressor supF6. Under permissive conditions in which active DnaA protein was available, the mini-F plasmids efficiently transformed the cells. However, the transformants lost the plasmid as the cells multiplied under conditions in which DnaA protein was inactivated or its synthesis was arrested. As controls, plasmids pSC101 and pBR322 were examined along with mini-F; pSC101 behaved in the same manner as mini-F, showing complete dependence on dnaA for stable maintenance, whereas pBR322 was indifferent to the dnaA defect. Thus, ori-2-dependent mini-F plasmid replication seems to require active dnaA gene function. This notion was strengthened by the results of deletion analysis which revealed that integrity of at least one of the two DnaA boxes present as a tandem repeat in ori-2 was required for the origin activity of mini-F replication.     

The site-specific deletion in plasmid pBR322

The formation of a deletion derivative of plasmid pBR322, designated pBR322 delta 1, was observed during cloning of various eukaryotic DNAs, when the BamHI site of the plasmid vector was used for construction of the recombinant molecules. The restriction analysis of six independently isolated pBR322 delta 1 plasmids allowed establishment of their complete identity. Similar deletion derivatives were also formed as a result of transformation of Escherichia coli cells by the linear form of vector pBR322 produced by BamHI cleavage, but not by SalI or HindIII. The endpoints of the deletion in one of the pBR322 delta 1 plasmids occurred at positions 375 and 16666 bp from the EcoRI site, as determined by sequence analysis. Formation of pBR322 delta 1 is most probably due to site-specific recombination between the sequence in the 1666-1670 bp region and the BamHI end of the linear pBR322 molecule. THe deletion was not controlled by the recA system of the host bacteria.     

Partition functions of unit-copy plasmids can stabilize the maintenance of plasmid pBR322 at low copy number.

The maintenance of plasmid pBR322 is highly unstable in a polA12 strain of Escherichia coli at 29 degrees C due to severely reduced copy number. Under these conditions, introduction of the par (partition) locus of plasmid P1 or the par (sop) region of F into pBR322 stabilizes it. A region with similar activity was detected in the P7 plasmid. The activity of the P1 par locus was dependent on the P1 parA gene product and was sensitive to par-specified incompatibility.     

Construction of new shuttle plasmid vectors for Escherichia coli-Bacteroides transgeneric cloning

Abstract An Escherichia coli-Bacteroides shuttle vehicle (pKBF367-1) was constructed by combining the pBR322 derivative pKC7 (5.9 kb) with [1] a 4.6 kb cryptic plasmid from Bacteroides fragilis ; and [2] the 4.2 kb Eco RI-B fragment of the B. fragilis plasmid pBFTM10. This latter component allowed selection of clindamycin-resistant transconjugants upon helper plasmid-mediated transfer to a recipient strain of Bacteroides distasonis . To improve the potential of pKBF367-1 (14.7 kb) as cloning vector, successive deletions generated derivatives of 12.8, 10.5 and 9.3 kb, which were still able to replicate in B. distasonis 419. These bifunctional vectors were successfully employed to introduce transposon Tn 501 (Hg^r) into B. distasonis 419, but expression of mercury resistance was not observed. This plasmid vehicles series may be useful for cloning Bacteroides genes in E. coli and studying their expression in a heterologous Bacteroides strain.