Effect of temperature,pH and ionic strength on hydroxyapatite stabilised Pickering emulsions produced in batch and continuous mode

Oil-in-water (O/W) Pickering emulsions are attracting attention as carriers of lipophilic active compounds with clear advantages over traditional systems. Having in view their effective use it is important to study their stability against environmental stresses impacting manufacture, storage, and application conditions. In this work, hydroxyapatite nanoparticles (n-HAp) Pickering emulsions produced in continuous mode using a mesostructured reactor (average size?~?7, 11 and 18 µm) and in batch mode using a rotor–stator device (average size?~?18 µm) were studied concerning their behaviour at different temperatures (5–90 ºC), pH (2–10) and ionic strength (0–500 mM), conditions with relevance for food applications. Droplet size, morphology, and zeta-potential were analysed after 1 and 7 days under storage. In general, and despite the droplet size, the n-HAp Pickering emulsions were stable within the tested ionic strength range, at relatively high pH environments (6–10), and at temperatures up to 70 ºC. Pickering emulsions undergo complete phase separation at very low pH (2) due to n-HAp particle's disruption. A clear tendency to aggregation and coalescence was observed for high temperatures (70–90 ºC). Results indicate no significant differences related to the used production method. From an industrial perspective, this work also corroborates that the scale-up to a continuous process using a mesostructured reactor, NETmix, from a batch laboratorial process is feasible without impacting stability.

Graphical abstract

     

Enhancement of Carotenoid Bioaccessibility from Tomatoes Using Excipient Emulsions: Influence of Particle Size

The effect of excipient emulsions with different lipid droplet sizes on carotenoid bioaccessibility from tomatoes was investigated using a simulated gastrointestinal tract (GIT). Excipient emulsions with different surface-weighted mean droplet diameters were fabricated: d ₃₂  = 0.15 μm (small), 0.40 μm (medium), and 22.3 μm (large). Changes in particle size, microstructure, ζ-potential, and carotenoid bioaccessibility were measured when tomato-emulsion mixtures that had received different thermal and mixing treatments were passed through the GIT model. Carotenoid bioaccessibility decreased with increasing initial droplet size (small ≥ medium > large), which was attributed to two effects. First, smaller droplets extracted carotenoids from tomato tissue more efficiently. Second, smaller droplets were digested faster leading to more rapid mixed micelle formation, thereby increasing carotenoid solubilization in intestinal fluids. Carotenoid bioaccessibility was higher from boiled than raw tomatoes because thermal disruption of the plant tissue facilitated carotenoid release. Carotenoid bioaccessibility was higher when tomatoes were boiled with emulsions than when they were boiled alone and then added to emulsions. In conclusion, excipient emulsions are highly effective at increasing carotenoid bioaccessibility from tomatoes, but lipid droplet size must be optimized to ensure high efficacy.

Open image in new window

Graphical Abstract ?

     

Interfacial Properties of β-Lactoglobulin at the Oil/Water Interface: Influence of Starch Conversion Products with Varying Dextrose Equivalents

In spray dried emulsions, frequently milk proteins are used as interfacial active components and starch conversion products are added as matrix material at high concentrations. To characterize interfacial properties at the oil/water interface by commonly applied methods, low protein, and carbohydrate concentrations from 1 to 2% are usually analyzed. The impact of a higher concentration of starch conversion products was not investigated so far. Therefore, the formation and rheological properties of β-lactoglobulin (β-LG) stabilized films at the oil/water interface were investigated via short and long-time adsorption behavior using pendant drop tensiometry as well as dilatational and interfacial shear rheology. Suitability of the applied methods to the chosen samples with higher concentrations >1–2% was verified by calculation of selected key numbers like capillary number and by detailed reviewing of the results which is summarized further on as key indicators. It is hypothesized, that the increase in concentration via presence of starch conversion products will delay interfacial stabilization as a result of increased bulk viscosity with decreasing degree of degradation (dextrose equivalent) of the starch. Furthermore, this increase in concentration leads to more stable interfacial films due to thermodynamic incompatibility effects between protein and starch conversion products which results in increases of local protein concentration. Key indicators proved a general suitability of applied methods for the evaluation of the investigated samples. Moreover, results showed an increase in interfacial film stability and elastic properties alongside a decreased interfacial tension if starch conversion products were present in a high concentration.

Graphical abstract

     

Soybean Hull Insoluble Polysaccharides: Improvements of Its Physicochemical Properties Through High Pressure Homogenization

Soybean hull is an agroindustrial waste which has not been fully studied as a food ingredient. The aims of this work were to obtain insoluble fibers from soybean hull and to evaluate the effect of high pressure homogenization (HPH) on its physicochemical properties. Hull insoluble polysaccharides (HIPS) were obtained in a single step, as the insoluble residue after pectin removal. FTIR showed bands corresponding to cellulose and hemicellulose in HIPS, and thermogravimetric analysis showed two degradation events at 236.3 °C and 325.6 °C, corresponding to cellulose and hemicellulose, respectively. HIPS dispersions (pH 3.00) were subjected to HPH by three cycles at increasing pressures (up to 1000 bar), obtaining soybean hull nanofibers. SEM images show that HPH at 1000 bar reduced the dimensions of the fiber bundle from 30 to 90 μm in length and 9–15 μm in diameter to nanofibers of 10–30 μm in length and 100–400 nm in diameter. AFM further confirms a heterogeneous distribution of sizes in HIPS₈₀₀ and HIPS₁₀₀₀, evidencing the presence of individual nanofibers with diameters around 50 ± 10 nm and 40 ± 10 nm, respectively, with several μm in length. Furthermore, an increase in water holding capacity from 2.1 to 61 g_water/g_{dry matter} and viscosity from 0.39 to 34,945 Pa.s were achieved as HPH at 1000 bar treatment was applied. HPH increased the interfacial area and promoted the interconnection of fibers in a hydrated gel-like structure. This explains flow behavior, which was extensively studied in this work: three-region viscosity profile (shear-thinning, plateau or shear-thickening and shear-thinning) and a pronounced hysteresis loop. Oscillatory rheology was used to study the viscoelastic behavior of HIPS dispersions. HIPS are a source of nanofibers, easy to obtain through a single step of chemical treatment followed by the application of high pressures. It is remarkable that the use of few chemical solvents is favorable from an environmental point of view. This work also suggests a potential application of HIPS to improve physicochemical and structural properties in acidic foods.

Graphical Abstract

     

Intriguing Plasmonic and Fluorescence Duality in Copper Nanoparticles

Dendrimeric copper nanoparticles (CuNPs) were prepared by the reduction of [Cu₂(CH₃CO₂)₄] with ascorbic acid at 75 °C in the presence of ranelate ions. The metallic nanoparticles exhibited a strong plasmonic band centered at 581 nm, and their average size distribution was typically in the range of 20–30 nm. By adding polyvinylpyrrolidone to the reaction mixture, the growth of the initial copper nanoparticles was hindered. Their sizes were stabilized around 1.8 nm, leading to spherical agglomerates of about 50 nm. Upon green light excitation, the agglomerates exhibited yellow-orange fluorescence emission, keeping the surface plasmon resonance band at 581 nm. This dual behavior suggested the occurrence of collective plasmonic resonance and efficient energy transfer within the agglomerated nanoparticles, in order to account for the observed fluorescence in the system.

Graphical Abstract

     

Microwave-Assisted Growth of Silver Nanoparticle Films with Tunable Plasmon Properties and Asymmetrical Particle Geometry for Applications as Radiation Sensors

We report a simple and fast microwave-assisted method to grow silver nanoparticle films with tunable plasmon resonance band. Microwaving time controls nucleation and growth as well as particle agglomeration, cluster formation, particle morphology, and the plasmonic properties. Films produced with times shorter than 30 s presented a single well-defined plasmon resonance band (~ 400 nm), whereas films produced with times longer than 40 s presented higher wavelength resonances modes (> 500 nm). Plasmon band position and intensity can be easily tuned by controlling microwaving time and power. SEM and AFM images suggested the growth of asymmetrical silver nanoparticles. Simulated extinction spectra considering particles as spheres, hemispheres, and spherical caps were performed. The films were employed to enhance the sensitivity of ionizing radiation detectors assessed by optically stimulated luminescence (OSL) via plasmon-enhanced luminescence. By tuning the plasmon resonance band to overlap with the OSL stimulation (530 nm), luminescence enhancements of greater than 100-fold were obtained, demonstrating the importance of tuning the plasmon resonance band to maximize the OSL intensity and detector sensitivity. This versatile method to produce silver nanoparticle films with tunable plasmonic properties is a promising platform for developing small-sized radiation detectors and advanced sensing technologies.

Graphical Abstract

     

Mycochemicals in wild and cultivated mushrooms: nutrition and health

The mushrooms have contributed to the development of active ingredients of fundamental importance in the field of pharmaceutical chemistry as well as of important tools in human and animal health, nutrition, and functional food. This review considers studies on the beneficial effects of medicinal mushrooms on the nutrition and health of humans and farm animals. An overview of the chemical structure and composition of mycochemicals is presented in this review with particular reference to phenolic compounds, triterpenoids and sterols, fatty acids and lipids, polysaccharides, proteins, peptides, and lectins. The nutritional value and chemical composition of wild and cultivated mushrooms in Italy is also the subject of this review which also deals with mushrooms as nutraceuticals and the use of mushrooms in functional foods. The nutraceutical benefits of UV irradiation of cultivated species of basidiomycetes to generate high amounts of vitamin D2 is also highlighted and the ability of the muhsrooms to inhibit glycation is analyzed. Finally, attention is paid to studies on bioactivities of some Italian wild and cultivated mushrooms with particular reference to species belonging to the genus Pleurotus. The review highlights the potential of medicinal mushrooms in the production of mycochemicals that represent a source of drugs, nutraceutical, and functional food.

Graphic abstract

     

Irradiance-driven 20-hydroxyecdysone production and morphophysiological changes in Pfaffia glomerata plants grown in vitro

Pfaffia glomerata possesses potential pharmacological and medicinal properties, mainly owing to the secondary metabolite 20-hydroxyecdysone (20E). Increasing production of biomass and 20E is important for industrial purposes. This study aimed to evaluate the influence of irradiance on plant morphology and production of 20E in P. glomerata grown in vitro. Nodal segments of accessions 22 and 43 (Ac22 and Ac43) were inoculated in culture medium containing MS salts and vitamins. Cultures were maintained at 25 ± 2 °C under a 16-h photoperiod and subjected to irradiance treatments of 65, 130, and 200 μmol m⁻² s⁻¹ by fluorescent lamps. After 30 days, growth parameters, pigment content, stomatal density, in vitro photosynthesis, metabolites content, and morphoanatomy were assessed. Notably, Ac22 plants exhibited 10-fold higher 20E production when cultivated at 200 μmol m⁻² s⁻¹ than at 65 μmol m⁻² s⁻¹, evidencing the importance of light quantity for the accumulation of this metabolite. 20E production was twice as high in Ac22 as in Ac43 plants although both accessions responded positively to higher irradiance. Growth under 200 μmol m⁻² s⁻¹ stimulated photosynthesis and consequent biomass accumulation, but lowered carotenoids and anthocyanins. Furthermore, increasing irradiance enhanced the number of palisade and spongy parenchyma cells, enhancing the overall growth of P. glomerata.

Graphical abstract

     

Water Diffusion in the Semi-Liquid State during Industrial Candy Preparation

In the domain of production of flavor delivery systems based on carbohydrate matrices, Hot Melt Extrusion (HME) is one of the processes used which implies a relatively slow water evaporation step compared to Spray Drying or other common processes. The HME process of generating liquid syrup is stable only at industrial scales. The drying kinetic associated to the syrup formation is followed by collecting the vapored water. This experiment is exploited to estimate the diffusion coefficient of liquid water in a continuously concentrating carbohydrate melt ranging from 30.4 to 10.2%w/w water content and at temperatures ranging from 100 to 116 °C. A combination of Fick, Arnold and Vogel-Tammann-Fulcher models was used to derive the viscosity of the solution, the gradient thickness at the surface of the stirred solution and the diffusion coefficient of water in the liquid under boiling conditions. It is here demonstrated that under continuous boiling conditions, the water concentration gradient depth from the surface of the solution has a dimension that is comparable to the size of the hydrated carbohydrate molecules and the diffusion coefficient of water in boiling carbohydrate solutions ranges from 5.10⁻⁹ cm.s⁻² for low temperature and high water content to 10⁻¹¹ cm.s⁻² for high temperature and low water content.

ᅟ

     

Characterisation of recombinant thermostable manganese-superoxide dismutase (NeMnSOD) from Nerium oleander

Superoxide dismutase is one of the key antioxidant enzymes accountable for the eradication of free radicals generated during various metabolic processes. This is first study reporting a thermostable MnSOD obtained from a xerophytic plant, Nerium oleander. The full-length gene identified using Rapid amplification of cDNA ends revealed an open reading frame of 699 bp flanked by 5′UTR and 3′UTR of 134 bp and 198 bp respectively. The corresponding NeMnSOD protein was cloned and expressed in Escherichia coli. The purified protein yields a band of 25.4 kDa, which established a specific activity of 2617 units mg^?1 of protein and under native condition yield bands of 52 kDa and 110 kDa, confirming the dimeric and tetrameric state of the protein. The Km and V_max of 0.078?±?0.008 mM and 1052.3?±?33.59 units mg^?1 of protein, respectively. The purified enzyme demonstrated thermostability by retaining more than 20% activity at a temperature 70 ℃. The enzyme functioned at pH range of 4–9.0 with maximum activity at pH 7.4. Sodium azide, effectively inhibited the activity of enzyme confirming it to be MnSOD. The enzyme activity was least affected on treatment with strong denaturants (Urea, guanidine HCl and SDS) and harsh chemicals (DTT, CHAPS and β-mercapto-ethanol) These experimental data validated with Insilco analysis revealed that NeMnSOD possessed thermo as well as kinetically stable moiety which can be further exploited with its applications in the field of pharmaceutical, food and cosmetic industry, which urge for such thermostable enzyme.

Graphic Abstract

     

Transformation of ginsenoside via deep eutectic solvents based on choline chloride as an enzymatic reaction medium

Ginsenoside compound K (CK) with a wide range of pharmacological activities has been widely used in the healthcare product industry. However, the application of CK is limited by low productivity and difficult separation. The purpose of this study is to convert ginsenoside Rb1 into CK by improving conversion efficiency in novel “green” reaction medium-deep eutectic solvent (DES). Talaromyces purpureogenus was selected from ginseng rhizosphere soil to produce β-glucosidase with high activity and purity to transform ginsenosides, and Mn²⁺ was found to be an enzyme promoter. Among the DES based on choline chloride as hydrogen-bond receptor, choline chloride:ethylene glycol (ChCl:EG = 2:1) was the most promising solvent in maintaining enzyme activity and stability. In the presence of 30% v/v ChCl:EG = 2:1, the half-life of β-glucosidase was increased by 96%, the solubility of F2 was increased by 120%, and CK yield was increased by 54% compared with those in the buffer. Fourier transform infrared, circular dichroism, and fluorescence spectroscopy confirmed that DES did not destroy the structure and conformation of β-glucosidase. In addition, 80.6% CK conversion was obtained at 60 °C, pH 4.5, 48 h and 8 mM Rb1, which provided a feasible method for efficiently producing CK.

Graphic abstract

     

Antioxidant,anti-inflammatory and healing potential of ethyl acetate fraction of Bauhinia ungulata L. (Fabaceae) on in vitro and in vivo wound model

The present work aimed to investigate the antioxidant, anti-inflammatory and wound healing potential of ethyl acetate fraction from Bauhinia ungulata L. (FABU) on in vitro and in vivo models. Wound healing assay using human lung adenocarcinoma A549 cell line was employed to evaluate the ability of FABU in modulating cell migration. In addition, a surgical wound model in C57BL/6 mice was used to study the healing potential of FABU incorporated into gel carbomer 940 (Carbopol®). Evaluation of lipid peroxidation, inflammatory and anti-inflammatory mediator gene expression, rate of wound closure, and histological analysis were done. FABU significantly reduced the gap area in in vitro wound healing assay, 24 h after treatment. In the animal model, FABU at 0.5% topically applied once-daily for 5 days to the surgical wounds significantly reduced the lesion area. Moreover, it significantly decreased the levels of lipid peroxidation in the lesions and decreased the relative gene expression levels of IL-1β and TNF-α in the injured region. In conclusion, our study suggests that Bauhinia ungulata can effectively promote the wound healing, probably by regulating the inflammatory environment during the early stages of the process.

Graphic abstract

     

Antiviral bioactivity of resveratrol against Zika virus infection in human retinal pigment epithelial cells

Resveratrol (RES) is a polyphenol with increasing interest for its inhibitory effects on a wide variety of viruses. Zika virus (ZIKV) is an arbovirus which causes a broad spectrum of ophthalmological manifestations in humans. Currently there is no certified therapy or vaccine to treat it, thus it has become a major global health threat. Retinal pigment epithelium (RPE) is highly permissive and susceptible to ZIKV. This work explored the protective effects of RES on ZIKV-infected human RPE cells. RES treatment resulted in a significant reduction of infectious viral particles in infected male ARPE-19 and female hTERT-RPE1 cells. This protection was positively influenced by the action of RES on mitochondrial dynamics. Also, docking studies predicted that RES has a high affinity for two enzymes of the rate-limiting steps of pyrimidine and purine biosynthesis and viral polymerase. This evidence suggests that RES might be a potential antiviral agent to treat ZIKV-induced ocular abnormalities.

Graphic abstract

     

In vitro organogenesis and plant regeneration of Thymus serpyllum L.: an important aromatic medicinal plant

An efficient in vitro propagation system has been developed for the rapid micropropagation of Thymus serpyllum L. (Banajwain), an aromatic medicinal herb from nodal explant on MS medium. Phenolic leaching and high rate of contamination was the most significant problem in establishing in vitro culture of Thymus serpyllum which was overcome by preparing explants in an antioxidant ascorbic acid (1000 ppm) at 6°C for 45 min and addition of the same antioxidant (50 mgl⁻¹) to the MS medium. The frequency of shoot production was influenced by different cytokinins (Kn, BAP, and Kn + BAP) and 95.56% shoot induction was observed when MS medium was supplemented with 1.0 + 2.0 mgl⁻¹ (Kn + BAP). The maximum average number of shoots 16.93 ± 2.15 and average length (3.98 ± 0.55) was recorded when MS medium have 0.5 + 2.0 mgl⁻¹ (Kn + BAP). The in vitro regenerated microshoots were rooted on MS and half strength MS medium and there was significant difference in root induction on both media under the influence of auxins (IAA, IBA, and NAA). The maximum average number (11.67 ± 3.03) and average root length (3.88 ± 0.71) was reported in half MS medium having 1.0 mgl⁻¹ IBA. The complete regenerated plantlets were acclimatized under growth chamber before transferring to the earthen pots and showed 90% survival.

Graphical abstract

     

Impacts of exposure to mine tailings on zooplankton hatching from a resting egg bank

In the last five years, two colossal environmental disasters involving iron-enriched mine tailings have occurred in Brazil, affecting many aquatic ecosystems over the short, medium and long-terms. This study investigated whether these iron-enriched mine tailings affect the main biotic strategy to restore zooplankton populations affected by severe stress, i.e., hatching of dormant stages. A 30 day hatching experiment was conducted, using a resting egg bank from a natural lake, exposed to 3 concentrations of mine tailings: control (0 g), T25 (25 g) and T50 (50 g). A total of 22, 15 and 16 species hatched in the control, T25 and T50, respectively. Conochilus sp., Filinia terminalis, Hexartha mira, Bosmina longirostris and Ceriodaphnia silvestrii hatched only in the control, which suggests that these species are sensitive to any concentration of mine tailings. A gradual decrease in richness and hatchling abundance was recorded, from the control (8.0?±?1.0 SE species and 1597?±?73.9 hatchlings) to T25 (4.6?±?1.2 species and 1279?±?136.5 hatchlings) and then to T50 (2.3?±?1.2 species and 603.3?±?61.9 hatchlings). Our results suggest that exposure of zooplankton resting eggs to iron-enriched mine tailings may negatively impact these egg banks in natural ecosystems, with potential impacts on the restoration of zooplankton communities after even short-term exposures.

Graphic abstract

     

Effect on simultaneous removal of ammonia,nitrate, and phosphorus via advanced stacked assembly biological filter for rural domestic sewage treatment

The discharge of ammonia–nitrogen (NH₃–N), total nitrogen (TN), chemical oxygen demand (COD), and total phosphorus (TP) in rural sewage usually exceeds the Pollutant Discharge Standard for Urban Sewage Treatment Plants (GB18918-2002). Efficient and cost-effective removal of these pollutants cannot be simultaneously realized using conventional rural sewage treatment methods. Thus, an assembled biological filter (D50?×?W50?×?H113 cm), including a phosphorus removal layer filled with solid polymeric ferric sulfate and alternating aerobic-anaerobic layers, is proposed herein. The aerobic (anerobic) layers were filled with zeolite (zeolite and composite soil) at different intervals. This system was used for the treatment of synthetic sewage having COD: 122.0–227.0 mg/L; NH₃–N: 29.1–47.0 mg/L; TN: 28.0–58.0 mg/L; and TP: 2.0–3.8 mg/L. Based on optimal operation conditions (40 L/h reflow rate, without artificial aeration, and 12-h operation cycle), the system showed NH₃–N, TN, COD, and TP removal efficiencies of 87.1? ± ?8.1, 83.4? ± ?7.9, 91.0? ± ?9.4, and 80.0? ± ?6.4%, respectively. Further, in the pilot-scale test, under the same optimal parameters, the removal efficiencies of NH₃–N, TN, COD, and TP were 78.9? ± ?8.1, 75.4? ± ?7.9, 82? ± ?9.4, and 76? ± ?6.4%, respectively. Furthermore, in the different functional units of the system, a large number of functional bacteria capable of efficiently facilitating the simultaneous removal of the different pollutants from sewage were identified. Therefore, this proposed system, which complies with current environmental discharge regulations, can be a more sustainable approach for the treatment of unattended rural sewage.

Graphic abstract

     

Anti-hyperglycemic effects of Eryngium billardierei F. Delaroche extract on insulin-resistance HepG2 cells in vitro

Background

Insulin resistance as a major problem is associated with type 2 diabetes mellitus. This study investigated the effect of Eryngium billardierei on insulin-resistance induced HepG2 cells.

Methods and results

MTT method was used to evaluate the viability of HepG2 cells treated with various doses of E. billardierei extract. An insulin-resistance model was established in HepG2 cells. Next, MTT assay and Acridine orange staining were performed to investigate the viability of cells in the vicinity of different concentrations of insulin, pioglitazone, and E. billardierei extract in an insulin-resistance media. The glucose uptake test was performed to select the optimal insulin concentration. Expression levels of IR, G6Pase, and PEPCK genes were assessed by real-time RT-PCR. According to obtained data, E. billardierei at concentrations of 0.5 and 1 mg/mL show no toxicity on cells. Furthermore, based on MTT assay and glucose uptake test 10^?5 mol/L insulin was chosen as the model group to induce insulin-resistance in HepG2 cells for gene expression analysis. Finally, 1 mg/mL E. billardierei not only induced no cytotoxicity but also showed an increase in the expression of IR as well as a reduction in G6Pase and PEPCK level compared to the control and model groups.

Conclusions

The obtained data indicated that 1 mg/mL E. billardierei might have an anti-insulin resistance effect on insulin-resistance HepG2 cells in vitro and could be a promising candidate with anti-hyperglycemic properties for diabetes treatments.

Graphical abstract

     

Structural,Morphological and Photoluminescence Studies of Pure ZrO2 and ZrO2: Eu+3 Nanophosphors Synthesised by Microwave-Assisted Hydrothermal Technique

The luminescence properties of pure and ZrO₂: Eu⁺³ nanophosphors with different concentration of the Eu⁺³ is synthesised and studied. A novel and environment benign microwave-induced hydrothermal process is used to synthesise the nanoparticles. As-formed pure ZrO₂ nanoparticles were X-ray amorphous, and upon calcination at higher temperatures, they crystallise to a combination of both cubic and tetragonal phases. However, the ZrO₂: Eu⁺³ nanophosphors prepared through the same technique under similar conditions yield exclusively cubic ZrO_2, and it entirely depends on the concentration of Eu⁺³ as revealed by XRD studies. The nanoparticles are found to be spherical, non-porous and agglomerated as observed by SEM. The surface area of the nanoparticles of pure ZrO₂ is found to be 30 m²/g for as-formed samples and 130 m²/g for calcined samples by BET studies. The increase in the surface area for calcined sample is due to the escaping of the adsorbed hydroxyl groups from the surface of the nanoparticles. The photoluminescence properties of the pure and Eu⁺³-doped ZrO₂ nanoparticles were measured under 251 nm excitation wavelength. Under this excitation, pure ZrO₂ gives the emissions at 394 nm, whereas Eu⁺³-doped nanoparticles gives the emissions at 613 nm, which corresponds to inter-f-f transition from ⁵D₀ ➔⁷F₂ (613 nm) and is arising due to electronic dipole in the Eu⁺³ activator ion. CIE colour space (x, y) coordinates corresponding to 613 nm in the CIE chromaticity diagram is 0.680, 0.319.

Graphical Abstract

     

Effects of yeast extract on the production of phenylpropanoid metabolites in callus culture of purple basil (Ocimum Basilicum L. var purpurascens) and their in-vitro evaluation for antioxidant potential

Ocimum basilicum L. var. purpurascens is an enriched reservoir of pharmaceutically important compounds with plenty of health and therapeutic attributes such as phenolic acids and anthocyanins. However, the inefficient production of aforementioned metabolites in wild has restricted its commercial utilization. Herein, commercially viable phytochemicals have been enhanced through elicitation of in-vitro cultures of O. basilicum using yeast extract.The impact of various concentrations (YE 1 mg/L,YE 10 mg/L, YE 25 mg/L, YE 50 mg/L, YE 100 mg/L, YE 200 mg/L and YE 400 mg/L) of yeast extract on biomass accumulation, phytochemical production, and antioxidant activities were assessed in callus cultures. Moderate concentration of yeast extract (100 mg/L) enhanced biomass accumulation i.e. fresh weight (FW 216.28 g/L) and dry weight (DW 15.49 g/L) up to 1.5 folds as compared to control (FW 167.14 g/L and DW 10.25 g/L). Similarly, yeast extract (100 mg/L) increased total phenolic and flavonoid contents as well as enhanced antioxidant activities such as ABTS (2,2 azinobis 3-ethylbenzthiazoline-6-sulphonic acid), FRAP (ferric reducing antioxidant power) and DPPH (2,2-diphenyl-1-picryhydrazyl). High performance liquid chromatography (HPLC) analysis was elucidated for further phytochemical investigation. HPLC analysis showed an increase of almost 1.9 folds as compared to control in rosmarinic acid (15.19 mg/g DW), chicoric acid (2.13 mg/g DW), peonidin (2.70 mg/g DW) and cyanidin (1.57 mg/g DW). Likewise, 1.8 fold and 2.4 folds increase was observed in eugenol essential oils (0.25 mg/g DW) and chavicol (0.037 mg/g DW), respectively. For cellular antioxidant activity, reactive oxygen specie or reactive nitogen specie (ROS/RNS) was induced in yeast cells and the effect of O. basilicum callus culture was further investigated in stressed yeast cells. A positive correlation exists between the antioxidant activities, TPC and TFC analysis. In short, these results showed that yeast extract could act as an efficient elicitor to enhance pharmacologically important metabolites in callus cultures of Ocimum basilicum.

Graphical abstract