Adsorption of zein on surfaces with controlled wettability and thermal stability of adsorbed zein films

Adsorption characteristics of zein protein on hydrophobic and hydrophilic surfaces have been investigated to understand the orientation changes associated with the protein structure on a surface. The protein is adsorbed by a self-assembly procedure on a monolayer-modified gold surface. It is observed that zein shows higher affinity toward hydrophilic than hydrophobic surfaces on the basis of the initial adsorption rate followed by quartz crystal microbalance studies. Reflection absorption infrared (RAIR) spectroscopic studies reveal the orientation changes associated with the adsorbed zein films. Upon adsorption, the protein is found to be denatured and the transformation of alpha-helix to beta-sheet form is inferred. This transformation is pronounced when the protein is adsorbed on hydrophobic surfaces as compared to hydrophilic surfaces. Electrochemical techniques (cyclic voltammetry and impedance techniques) are very useful in assessing the permeability of zein film. It is observed that the zein moieties adsorbed on hydrophilic surfaces are highly impermeable in nature and act as a barrier for small molecules. The topographical features of the deposits before and after adsorption are analyzed by atomic force microscopy. The protein adsorbed on hydrophilic surface shows rod- and disclike features that are likely to be the base units for the growth of cylindrical structures of zein. The thermal stability of the adsorbed zein film has been followed by variable-temperature RAIR measurements.     

Influence of self-assembled monolayer surface chemistry on Candida antarctica lipase B adsorption and specific activity

Immobilization of Candida antarctica B lipase was examined on gold surfaces modified with either methyl- or hydroxyl-terminated self-assembled alkylthiol monolayers (SAMs), representing hydrophobic and hydrophilic surfaces, respectively. Lipase adsorption was monitored gravimetrically using a quartz crystal microbalance. Lipase activity was determined colorimetrically by following p-nitrophenol propionate hydrolysis. Adsorbed lipase topography was examined by atomic force microscopy. The extent of lipase adsorption was nearly identical on either surface (approximately 240 ng cm⁻²), but its specific activity was sixfold higher on the methyl-terminated SAM, showing no activity loss upon immobilization. A uniform, 5.5 nm high, highly packed monolayer of CALB formed on the methyl-terminated SAM, while the adsorbed protein was disordered on the hydroxyl-terminated SAM. Hydrophobic surfaces thus may specifically orient the lipase in a highly active state.     

Selective Interactions of Zein Microspheres with Different Class of Drugs: An In Vitro and In Silico Analysis

In this study, we have evaluated the interactions of zein microspheres with different class of drugs (hydrophobic, hydrophilic, and amphiphilic) using in vitro and in silico analysis. Zein microspheres loaded with aceclofenac, metformin, and promethazine has been developed by solvent evaporation technique and analyzed for its compatibility. The physical characterization depicted the proper encapsulation of hydrophobic drug in the microspheres. The in vitro release study revealed the sustaining ability of the microspheres in the following order: hydrophobic > hydrophilic > amphiphilic. In silico analysis also confirmed the better binding affinity and greater interactions of hydrophobic drug with zein. The above results revealed that zein is more suitable for hydrophobic drugs in the development of sustained drug delivery systems using solvent evaporation technique. The study therefore envisages a scope for identifying the most suitable polymer for a sustained drug delivery system in accordance with the nature of the drug.KEY WORDS: hydrophilic drugs, hydrophobic drugs, in silico analysis, protein-drug interactions, solvent evaporation, zein microspheres     

Evaluation of surface hydrophobicity of immobilized protein with a surface plasmon resonance sensor

Immobilization is widely used to isolate agglutinative and associative proteins with large hydrophobic surfaces. Surface hydrophobicities of immobilized proteins were quantified by measuring the adsorption amounts of Triton X-100 as a hydrophobic probe with a biosensor that utilizes the phenomena of surface plasmon resonance (SPR). We measured SPR signal changes derived from adsorption of Triton X-100 to five kinds proteins and calculated the monolayer adsorption capacity using the Brunauer-Emmett-Teller equation, partly modified with a term for correcting an influence of the net charge of immobilized protein. SPR signal changes obtained by this method correlated with the values of surface hydrophobicities obtained by conventional assay using a hydrophobic probe. Thus this measuring method using an SPR sensor and Triton X-100 is expected to be a tool for quantifying surface hydrophobicities of immobilized proteins.     

Nano-scale probe fabrication using self-assembly technique and application to detection of<Emphasis Type="Italic">Escherichia coli</Emphasis> O 157∶H7

A self-assembled monolayer of protein G was fabricated to develop an immunosensor based on surface plasmon resonance (SPR), thereby improving the performance of the antibody-based biosensor through immobilizing the antibody molecules (IgG). As such, 11-mercaptoundecanoic acid (11-MUA) was adsorbed on a gold (Au) support, while the non-reactive hydrophilic surface was changed through substituting the carboxylic acid group (-COOH) in the 11-MUA molecule using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrocholide (EDAC). The formation of the self-assembled protein G layer on the Au substrate and binding of the antibody and antigen were investigated using SPR spectroscopy, while the surface topographies of the fabricated thin films were analyzed using atomic force microscopy (AFM). A fabricated monoclonal antibody (Mab) layer was applied for detectingE. coli O157∶H7. As a result, a linear relationship was achieved between the pathogen concentration and the SPR angle shift, plus the detection limit was enhanced up to 10² CFU/mL.     

High-throughput analysis of mumps virus and the virus-specific monoclonal antibody on the arrays of a cationic polyelectrolyte with a spectral SPR biosensor

We investigated the potential use of a spectral surface plasmon resonance (SPR) biosensor in a high-throughput analysis of mumps virus and a mumps virus-specific mAb on the arrays of a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA). The PDDA surface was constructed by electrostatic adsorption of the polyelectrolyte onto a monolayer of 11-mercaptoundecanoic acid (MUA). Poly-L-lysine was also adsorbed onto the MUA monolayer and compared with the PDDA surface in the capacity of mumps virus immobilization. The PDDA surface showed a higher adsorption of mumps virus than the poly-L-lysine surface. The SPR signal caused by the virus binding onto the PDDA surface was proportional to the concentration of mumps virus from 0.5 x 10(5) to 14 x 10(5) pfu/mL. The surface structure of the virus arrays was visualized by atomic force microscopy. Then, a dose-dependent increase in the SPR signal was observed when various concentrations of the antimumps virus antibody in buffer or human serum were applied to the virus arrays, and their interaction was specific. Thus, it is likely that the spectral SPR biosensor based on the cationic polyelectrolyte surface may provide an efficient system for a high-throughput analysis of intact virus and serodiagnosis of infectious diseases.     

Structural organization of DMPC lipid layers on chemically micropatterned self-assembled monolayers as biomimetic systems

The growth structure of DMPC lipid layers on hydrophobic and hydrophilic alkylsilane-based self-assembled monolayers adsorbed on silicon has been investigated by means of X-ray reflectometry and atomic force microscopy. Hydrophilic modification of hydrophobically terminated ODS-SAMs has been achieved by dose-controlled irradiation with DUV light. While island formation of small DMPC bilayer islands is observed on hydrophobic SAM surfaces, closed layers of DMPC monolayers are formed on hydrophilic SAM surfaces. Furthermore, DMPC adsorption on chemically micropatterned substrates with alternating hydrophobic/hydrophilic surface properties has been studied by imaging ellipsometry and photoemission microscopy. Indication for at least partial bridging of hydrophobic areas by an adsorbed DMPC monolayer has been found.     

Nisin adsorption on hydrophilic and hydrophobic surfaces: evidence of its interactions and antibacterial activity

Study of peptides adsorption on surfaces remains a current challenge in literature. A complementary approach, combining X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to investigate the antimicrobial peptide nisin adsorption on hydrophilic and hydrophobic surfaces. The native low density polyethylene was used as hydrophobic support and it was grafted with acrylic acid to render it hydrophilic. XPS permitted to confirm nisin adsorption and to determine its amount on the surfaces. ToF‐SIMS permitted to identify the adsorbed bacteriocin type and to observe its distribution and orientation behavior on both types of surfaces. Nisin was more oriented by its hydrophobic side to the hydrophobic substrate and by its hydrophilic side to the outer layers of the adsorbed peptide, in contrast to what was observed on the hydrophilic substrate. A correlation was found between XPS and ToF‐SIMS results, the types of interactions on both surfaces and the observed antibacterial activity. Such interfacial studies are crucial for better understanding the peptides interactions and adsorption on surfaces and must be considered when setting up antimicrobial surfaces. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Direct real‐time imaging of protein adsorption onto hydrophilic and hydrophobic surfaces

Atomic force microscopy has been used to follow in real time the adsorption from solution of two of the gliadin group of wheat seed storage proteins onto hydrophilic (mica) and hydrophobic (graphite) surfaces. The liquid cell of the microscope was used initially to acquire images of the substrate under a small quantity of pure solvent (1% acetic acid). Continuous imaging as an injection of gliadin solution entered the liquid cell enabled the adsorption process to be followed in situ from zero time. For ω‐gliadin, a monolayer was formed on the mica substrate during a period of ～2000 s, with the protein molecules oriented in parallel to the mica surface. In contrast, the ω‐gliadin had a relatively low affinity for the graphite substrate, as demonstrated by slow and weak adsorption to the surface. With γ‐gliadin, random deposition onto the mica surface was observed forming monodispersed structures, whereas on the graphite surface, monolayer islands of protein were formed with the protein molecules in a perpendicular orientation. Sequential adsorption experiments indicated strong interactions between the two proteins that, under certain circumstances, caused alterations to the surface morphologies of preadsorbed species. The results are relevant to our understanding of the interactions of proteins within the hydrated protein bodies of wheat grain and how these determine the processing properties of wheat gluten and dough. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 74–84, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Effect of Hydrophilic and Lipophilic Compounds on Zein Microstructures

Zein, the prolamine of corn, contains nearly an equal amount of hydrophilic and lipophilic amino acid residues. Its tertiary structure has a regular geometry measuring 17 × 4.5 × 1.2 nm. The structure of zein allows it to function as a polymeric amphiphile. Zein had been observed to self-assemble into periodic bilayer structures and nanotubes. This work investigated the structural development of zein self-assemblies as affected by the hydrophilic–lipophilic balance (HLB) of the system. The formation of several structures, including spheres, sponge, and lamellae, were identified. Images were obtained by SEM, AFM, and FIB/SEM. The radius of curvature of the observed assemblies was affected by the HLB of the components in the system. Thus, lipophilic flavor oils increased the curvature of zein spheres producing smaller spheres. Curvature decreased in the presence of amphiphilic fatty acids forming sponges with interconnected channels. Hydrophilic compounds decreased the curvature to the point of forming smooth films. The results of this study see a future in microencapsulation and controlled release systems for flavor and bioactive compounds in the food industry.     

Nisin-activated hydrophobic and hydrophilic surfaces: assessment of peptide adsorption and antibacterial activity against some food pathogens

An effective antimicrobial packaging or food contact surface should be able to kill or inhibit micro-organisms that cause food-borne illnesses. Setting up such systems, by nisin adsorption on hydrophilic and hydrophobic surfaces, is still a matter of debate. For this purpose, nisin was adsorbed on two types of low-density polyethylene: the hydrophobic native film and the hydrophilic acrylic acid-treated surface. The antibacterial activity was compared for those two films and it was highly dependent on the nature of the surface and the nisin-adsorbed amount. The hydrophilic surfaces presented higher antibacterial activity and higher amount of nisin than the hydrophobic surfaces. The effectiveness of the activated surfaces was assessed against Listeria innocua and the food pathogens Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. S. aureus was more sensitive than the three other test bacteria toward both nisin-functionalized films. Simulation tests to mimic refrigerated temperature showed that the films were effective at 20 and 4 °C with no significant difference between the two temperatures after 30 min of exposure to culture media.     

An in vitro study of initial adsorption from human parotid and submandibular/sublingual resting saliva at solid/liquid interfaces

The influence of saliva concentration, saliva total protein content and the wetting characteristics of exposed solids on in vitro film formation was studied by the technique of in situ ellipsometry. The rates and plateau values of adsorption (45 min) at solid/liquid interfaces (hydrophilic silica and hydrophobic methylated silica surfaces) were determinated for human parotid (HPS) and submandibular/sublingual (HSMSLS) resting saliva solutions (0.1 and 1.0%, (v/v), saliva in phosphate buffered saline). Adsorption rates were related to a model assuming mass transport through an unstirred layer adjacent to the surface. The results showed that the adsorption was rapid, concentration dependent and higher on hydrophobic than on hydrophilic surfaces. Analysis of the influence of protein concentration on the adsorbed amounts demonstrated an interaction between protein concentration and the two surfaces for HPS and HSMSLS, respectively. This may indicate differences in binding mode. Inter‐individual differences were found not to be significant at the 1% level of probability. Comparison of the observed adsorption and calculated diffusion rates suggest that on hydrophilic surfaces initial adsorption of proteins diffusing at rates corresponding to those of statherin and aPRPs takes place, whereas on hydrophobic surfaces lower molecular mass compounds appear to be involved.     

Use of self-assembled monolayers of different wettabilities to study surface selection and primary adhesion processes of green algal (Enteromorpha) zoospores

We investigated surface selection and adhesion of motile zoospores of a green, macrofouling alga (Enteromorpha) to self-assembled monolayers (SAMs) having a range of wettabilities. The SAMs were formed from alkyl thiols terminated with methyl (CH(3)) or hydroxyl (OH) groups or mixtures of CH(3)- and OH-terminated alkyl thiols and were characterized by measuring the advancing contact angles and by X-ray photoelectron spectroscopy. There was a positive correlation between the number of spores that attached to the SAMs and increasing contact angle (hydrophobicity). Moreover, the sizes of the spore groups (adjacent spores touching) were larger on the hydrophobic SAMs. Video microscopy of a patterned arrangement of SAMs showed that more zoospores were engaged in swimming and "searching" above the hydrophobic sectors than above the hydrophilic sectors, suggesting that the cells were able to "sense" that the hydrophobic surfaces were more favorable for settlement. The results are discussed in relation to the attachment of microorganisms to substrata having different wettabilities.     

Surface plasmon resonance immunosensor for the detection of Salmonella typhimurium

An immunosensor based on surface plasmon resonance (SPR) using protein G was developed for the detection of Salmonella typhimurium. A protein G layer was fabricated by binding chemically to self-assembly monolayer (SAM) of 11-mercaptoundecanoic acid (MUA) on gold (Au) surface. The formation of protein G layer on Au surface modified with 11-MUA and the binding of antibody and antigen in series were confirmed by SPR spectroscopy. The effect of detergent such as Tween-20 on binding efficiency of antibody and antigen was investigated by SPR. The binding efficiency of antigen to the antibody immobilized on Au surface was improved up to about 85% and 100% by using protein G and Tween-20, respectively. The surface morphology analyses of 11-MUA monolayer on Au substrate, protein G layer on 11-MUA monolayer and antibody layer immobilized on protein G layer were performed by atomic force microscope (AFM). Consequently, an immunosensor based on SPR for the detection of S. typhimurium using protein G was developed with a detection range of 10(2) to 10(9)CFU/ml. The current fabrication technique of a SPR immunosensor for the detection of S. typhimurium could be applied to construct other immnosensors or protein chips.     

Adsorption Properties and Activities of Lipase on a Gold Substrate Modified by Self-assembled Monolayers

The adsorption properties, amount and specific activity of lipase D from Rhizopus delemar were investigated by employing a gold substrate modified with seven kinds of thiol monolayer. Quartz crystal microbalance measurements revealed that the amount of the enzyme adsorbed to the hydrophobic monolayers (e.g. benzenethiol) was much higher than that to the hydrophilic monolayers (e.g. 3-mercaptopropanoic acid). In contrast, lipase D adsorbed to the hydrophilic, 2-amino-1-ethanethiol monolayer showed the highest specific activity, the value being 300-fold higher than for the same enzyme dissolved in an aqueous medium.     

Adsorption properties and activities of lipase on a gold substrate modified by self-assembled monolayers.

The adsorption properties, amount and specific activity of lipase D from Rhizopus delemar were investigated by employing a gold substrate modified with seven kinds of thiol monolayer. Quartz crystal microbalance measurements revealed that the amount of the enzyme adsorbed to the hydrophobic monolayers (e.g. benzenethiol) was much higher than that to the hydrophilic monolayers (e.g. 3-mercaptopropanoic acid). In contrast, lipase D adsorbed to the hydrophilic, 2-amino-1-ethanethiol monolayer showed the highest specific activity, the value being 300-fold higher than for the same enzyme dissolved in an aqueous medium.     

Zwitterionic polymers exhibiting high resistance to nonspecific protein adsorption from human serum and plasma

This study examined six different polymer and self-assembled monolayer (SAM) surface modifications for their interactions with human serum and plasma. It was demonstrated that zwitterionic polymer surfaces are viable alternatives to more traditional surfaces based on poly(ethylene glycol) (PEG) as nonfouling surfaces. All polymer surfaces were formed using atom transfer radical polymerization (ATRP) and they showed an increased resistance to nonspecific protein adsorption compared to SAMs. This improvement is due to an increase in the surface packing density of nonfouling groups on the surface, as well as a steric repulsion from the flexible polymer brush surfaces. The zwitterionic polymer surface based on carboxybetaine methacrylate (CBMA) also incorporates functional groups for protein immobilization in the nonfouling background, making it a strong candidate for many applications such as in diagnostics and drug delivery.     

Characterization of a self-assembled monolayer of thiol on a gold surface and the fabrication of a biosensor chip based on surface plasmon resonance for detecting anti-GAD antibody

A biosensor chip utilizing surface plasmon resonance (SPR) was fabricated for detecting anti-glutamic acid decarboxylase (GAD) antibody, which is an indicator of the presence of type I diabetes mellitus. The sensor surfaces were constructed from various thiol mixtures of different molar ratios of 3-mercaptopropionic acid (3-MPA) to 11-mercaptoundecanoic acid (11-MUA). To determine the surface characteristics of the different alkanethiol monolayers, several quantitative and kinetic measurements were carried out. The extent of immobilization of streptavidin (SA) and biotin-GAD (the anti-GAD receptor) and the immune response of anti-GAD antibody against GAD were measured using the SPR biosensor. The terminal functional group of a thiol has different effects on the adsorption and covalent binding of protein depending on the steric hindrance. The protein chip described herein permits simple, rapid detection of anti-GAD antibody.     

Comparison of a carboxylated terthiophene surface with carboxymethylated dextran layer for surface plasmon resonance detection of progesterone

Functionalization of a gold surface is usually accomplished by covalent binding via self-assembled monolayers (SAMs) on the gold surface, followed by attachment of flexible polymeric linker layers such as dextran hydrogels. However, these techniques require multiple steps and also have nonspecific interactions and steric problems. In this study, a self-assembled carboxylated terthiophene monolayer was formed onto a gold surface to create a sensitive and stable surface plasmon resonance (SPR) biosensing system. Compared with a commercial carboxymethyl dextran chip (CM5), the terthiophene SAM surface provided more than six times more antibody-binding signals and nearly three times the SPR assay sensitivity for progesterone (P₄).     

On the Adsorption of Human Acidic Proline-rich Proteins (PRP-1 and PRP-3) and Statherin at Solid/liquid Interfaces

The objective of the present study was to investigate the adsorption of PRP-1, PRP-3 and statherin to solid surfaces in terms of dependence on concentration, the presence of electrolyte and surface wettability. Time resolved in situ ellipsometry was used to determine the adsorbed amounts and adsorption rates of pure PRP-1, PRP-3 and statherin onto pure (hydrophilic) and methylated (hydrophobized) silica surfaces. The initial film build-up was fast and plateaus were reached within 10 min at all concentrations for both types of surfaces and all proteins. The observed adsorption and calculated diffusion rates of PRP-1, PRP-3 and statherin, respectively, indicated that the initial adsorption was mass transport controlled at low concentrations. At hydrophobic surfaces, isotherm shapes and adsorbed amounts were similar for PRP-1 and PRP-3, while statherin adsorbed to a higher extent. At hydrophilic surfaces only PRP-1 adsorbed substantially, while for PRP-3 and statherin adsorbed amounts were low. The presence of Ca 2+ ions in the phosphate buffer solution increased the adsorption of statherin and PRP-3 on hydrophobic surfaces, while PRP-1 was unaffected. On hydrophilic surfaces, all three proteins adsorbed in higher amounts in NaCl, compared to CaCl 2 at similar ionic strength. It is concluded that acidic PRPs (PRP-1 and PRP-3) and statherin readily form films on a variety of materials and solution conditions, showing that their functions may be fulfilled under a wide range of conditions.