Tropomodulin contains two actin filament pointed end-capping domains

Tropomodulin 1 (Tmod1) is a approximately 40-kDa tropomyosin binding and actin filament pointed end-capping protein that regulates pointed end dynamics and controls thin filament length in striated muscle. In vitro, the capping affinity of Tmod1 for tropomyosin-actin filaments (Kd approximately 50 pm) is several thousand-fold greater than for capping of pure actin filaments (Kd approximately 0.1 microM). The tropomyosin-binding region of Tmod1 has been localized to the amino-terminal portion between residues 1 and 130, but the location of the actin-capping domain is not known. We have now identified two distinct actin-capping regions on Tmod1 by testing a series of recombinant Tmod1 fragments for their ability to inhibit actin elongation from gelsolin-actin seeds using pyrene-actin polymerization assays. The carboxyl-terminal portion of Tmod1 (residues 160-359) contains the principal actin-capping activity (Kd approximately 0.4 microM), requiring residues between 323 and 359 for full activity, whereas the amino-terminal portion of Tmod1 (residues 1-130) contains a second, weaker actin-capping activity (Kd approximately 1.8 microM). Interestingly, 160-359 but not 1-130 enhances spontaneous actin nucleation, suggesting that the carboxyl-terminal domain may bind to two actin subunits across the actin helix at the pointed end, whereas the amino-terminal domain may bind to only one actin subunit. On the other hand, the actin-capping activity of the amino-terminal but not the carboxyl-terminal portion of Tmod1 is enhanced several thousand-fold in the presence of skeletal muscle tropomyosin. We conclude that the carboxyl-terminal capping domain of Tmod1 contains a TM-independent actin pointed end-capping activity, whereas the amino-terminal domain contains a TM-regulated pointed end actin-capping activity.     

Interaction of WASP/Scar proteins with actin and vertebrate Arp2/3 complex

The Wiskott-Aldrich-syndrome protein (WASP) regulates polymerization of actin by the Arp2/3 complex. Here we show, using fluorescence anisotropy assays, that the carboxy-terminal WA domain of WASP binds to a single actin monomer with a Kd of 0.6 microM in an equilibrium with rapid exchange rates. Both WH-2 and CA sequences contribute to actin binding. A favourable DeltaH of -10 kcal mol(-1) drives binding. The WA domain binds to the Arp2/3 complex with a Kd of 0.9 microM; both the C and A sequences contribute to binding to the Arp2/3 complex. Wiskott-Aldrich-syndrome mutations in the WA domain that alter nucleation by the Arp2/3 complex over a tenfold range without affecting affinity for actin or the Arp2/3 complex indicate that there may be an activation step in the nucleation pathway. Actin filaments stimulate nucleation by producing a fivefold increase in the affinity of WASP-WA for the Arp2/3 complex.     

Tropomodulin caps the pointed ends of actin filaments

Many proteins have been shown to cap the fast growing (barbed) ends of actin filaments, but none have been shown to block elongation and depolymerization at the slow growing (pointed) filament ends. Tropomodulin is a tropomyosin-binding protein originally isolated from red blood cells that has been localized by immunofluorescence staining to a site at or near the pointed ends of skeletal muscle thin filaments (Fowler, V. M., M. A., Sussman, P. G. Miller, B. E. Flucher, and M. P. Daniels. 1993. J. Cell Biol. 120: 411-420). Our experiments demonstrate that tropomodulin in conjunction with tropomyosin is a pointed end capping protein: it completely blocks both elongation and depolymerization at the pointed ends of tropomyosin-containing actin filaments in concentrations stoichiometric to the concentration of filament ends (Kd < or = 1 nM). In the absence of tropomyosin, tropomodulin acts as a "leaky" cap, partially inhibiting elongation and depolymerization at the pointed filament ends (Kd for inhibition of elongation = 0.1-0.4 microM). Thus, tropomodulin can bind directly to actin at the pointed filament end. Tropomodulin also doubles the critical concentration at the pointed ends of pure actin filaments without affecting either the rate of extent of polymerization at the barbed filament ends, indicating that tropomodulin does not sequester actin monomers. Our experiments provide direct biochemical evidence that tropomodulin binds to both the terminal tropomyosin and actin molecules at the pointed filament end, and is the long sought-after pointed end capping protein. We propose that tropomodulin plays a role in maintaining the narrow length distributions of the stable, tropomyosin-containing actin filaments in striated muscle and in red blood cells.     

Arabidopsis capping protein (AtCP) is a heterodimer that regulates assembly at the barbed ends of actin filaments

The precise regulation of actin filament polymerization and depolymerization is essential for many cellular processes and is choreographed by a multitude of actin-binding proteins (ABPs). In higher plants the number of well characterized ABPs is quite limited, and some evidence points to significant differences in the biochemical properties of apparently conserved proteins. Here we provide the first evidence for the existence and biochemical properties of a heterodimeric capping protein from Arabidopsis thaliana (AtCP). The purified recombinant protein binds to actin filament barbed ends with Kd values of 12-24 nM, as assayed both kinetically and at steady state. AtCP prevents the addition of profilin actin to barbed ends during a seeded elongation reaction and suppresses dilution-mediated depolymerization. It does not, however, sever actin filaments and does not have a preference for the source of actin. During assembly from Mg-ATP-actin monomers, AtCP eliminates the initial lag period for actin polymerization and increases the maximum rate of polymerization. Indeed, the efficiency of actin nucleation of 0.042 pointed ends created per AtCP polypeptide compares favorably with mouse CapZ, which has a maximal nucleation of 0.17 pointed ends per CapZ polypeptide. AtCP activity is not affected by calcium but is sensitive to phosphatidylinositol 4,5-bisphosphate. We propose that AtCP is a major regulator of actin dynamics in plant cells that, together with abundant profilin, is responsible for maintaining a large pool of actin subunits and a surprisingly small population of F-actin.     

Gelsolin as a calcium-regulated actin filament-capping protein.

Various concentrations of gelsolin (25-100 nM) were added to 2 microM polymerized actin. The concentrations of free calcium were adjusted to 0.05-1.5 microM by EGTA/Ca2+ buffer. Following addition of gelsolin actin depolymerization was observed that was caused by dissociation of actin subunits from the pointed ends of treadmilling actin filaments and inhibition by gelsolin of polymerization at barbed ends. The time course of depolymerization revealed an initial lag phase that was followed by slow decrease of the concentration of polymeric actin to reach the final steady state polymer and monomer concentration. The initial lag phase was pronounced at low free calcium and low gelsolin concentrations. On the basis of quantitative analysis the kinetics of depolymerization could be interpreted as capping, i.e. binding of gelsolin to the barbed ends of actin filaments and subsequent inhibition of polymerization, rather than severing. The main argument for this conclusion was that even gelsolin concentrations (100 nM) that exceed the concentration of filament ends ( approximately 2 nM), cause the filaments to depolymerize at a rate that is similar to the rate of depolymerization of the concentration of pointed ends existing before addition of gelsolin. The rate of capping is directly proportional to the free calcium concentration. These experiments demonstrate that at micromolar and submicromolar free calcium concentrations gelsolin acts as a calcium-regulated capping protein but not as an actin filament severing protein, and that the calcium binding sites of gelsolin which regulate the various functions of gelsolin (capping, severing and monomer binding), differ in their calcium affinity.     

Capping and dynamic relation between domains 1 and 2 of gelsolin

Gelsolin is a protein that severs and caps actin filaments. The two activities are located in the N-terminal half of the gelsolin molecules. Severing and subsequent capping requires the binding of domains 2 and 3 (S2–3) to the side of the filaments to position the N-terminal domain 1 (S1) at the barbed end of actin (actin subdomains 1 and 3). The results provide a structural basis for the gelsolin capping mechanism. The effects of a synthetic peptide derived from the sequence of a binding site located in gelsolin S2 on actin properties have been studied. CD and IR spectra indicate that this peptide presented a secondary structure in solution which would be similar to that expected for the native full length gelsolin molecule. The binding of the synthetic peptide induces conformational changes in actin subdomain 1 and actin oligomerization. An increase in the polymerization rate was observed, which could be attributed to a nucleation kinetics effect. The combined effects of two gelsolin fragments, the synthetic peptide derived from an S2 sequence and the purified segment 1 (S1), were also investigated as a molecule model. The two fragments induced nucleation enhancement and inhibited actin depolymerization, two characteristic properties of capping. In conclusion, for the first time it is reported that the binding of a small synthetic fragment is sufficient to promote efficient capping by S1 at the barbed end of actin filaments. ©1998 European Peptide Society and John Wiley & Sons, Ltd.     

Mechanism of interaction of Acanthamoeba actophorin (ADF/Cofilin) with actin filaments.

We characterized the interaction of Acanthamoeba actophorin, a member of ADF/cofilin family, with filaments of amoeba and rabbit skeletal muscle actin. The affinity is about 10 times higher for muscle actin filaments (Kd = 0.5 microM) than amoeba actin filaments (Kd = 5 microM) even though the affinity for muscle and amoeba Mg-ADP-actin monomers (Kd = 0.1 microM) is the same (Blanchoin, L., and Pollard, T. D. (1998) J. Biol. Chem. 273, 25106-25111). Actophorin binds slowly (k+ = 0.03 microM-1 s-1) to and dissociates from amoeba actin filaments in a simple bimolecular reaction, but binding to muscle actin filaments is cooperative. Actophorin severs filaments in a concentration-dependent fashion. Phosphate or BeF3 bound to ADP-actin filaments inhibit actophorin binding. Actophorin increases the rate of phosphate release from actin filaments more than 10-fold. The time course of the interaction of actophorin with filaments measured by quenching of the fluorescence of pyrenyl-actin or fluorescence anisotropy of rhodamine-actophorin is complicated, because severing, depolymerization, and repolymerization follows binding. The 50-fold higher affinity of actophorin for Mg-ADP-actin monomers (Kd = 0.1 microM) than ADP-actin filaments provides the thermodynamic basis for driving disassembly of filaments that have hydrolyzed ATP and dissociated gamma-phosphate.     

Effect of capping protein on the kinetics of actin polymerization

Acanthamoeba capping protein increased the rate of actin polymerization from monomers with and without calcium. In the absence of calcium, capping protein also increased the critical concentration for polymerization. Various models were evaluated for their ability to predict the effect of capping protein on kinetic curves for actin polymerization under conditions where the critical concentration was not changed. Several models, which might explain the increased rate of polymerization from monomers, were tested. Two models which predicted the experimental data poorly were (1) capping protein was similar to an actin filament, bypassing nucleation, and (2) capping protein fragmented filaments. Three models in which capping protein accelerated, but did not bypass, nucleation predicted the data well. In the best one, capping protein resembled a nondissociable actin dimer. Several lines of evidence have supported the idea that capping protein blocks the barbed end of actin filaments, preventing the addition and loss of monomers [Cooper, J. A., Blum, J. D., & Pollard, T. D. (1984) J. Cell Biol. 99, 217-225; Isenberg, G. A., Aebi, U., & Pollard, T. D. (1980) Nature (London) 288, 455-459]. This mechanism was also supported here by the effect of capping protein on the kinetics of actin polymerization which was nucleated by preformed actin filaments. Low capping protein concentrations slowed nucleated polymerization, presumably because capping protein blocked elongation at barbed ends of filaments. High capping protein concentrations accelerated nucleated polymerization because of capping protein's ability to interact with monomers and accelerate nucleation.     

Influence of the C terminus of Wiskott-Aldrich syndrome protein (WASp) and the Arp2/3 complex on actin polymerization

The 70 C-terminal amino acids of Wiskott-Aldrich syndrome protein (WASp WA) activate the actin nucleation activity of the Arp2/3 complex. WASp WA binds both the Arp2/3 complex and actin monomers, but the mechanism by which it activates the Arp2/3 complex is not known. We characterized the effect of WASp WA on actin polymerization in the absence and presence of the human Arp2/3 complex. WASp WA binds actin monomers with an apparent K(d) of 0.4 microM, inhibiting spontaneous nucleation and subunit addition to pointed ends, but not addition to barbed ends. A peptide containing only the WASp homology 2 motif behaves similarly but with a 10-fold lower affinity. In contrast to previously published results, neither WASp WA nor a similar region of the protein Scar1 significantly depolymerizes actin filaments under a variety of conditions. WASp WA and the Arp2/3 complex nucleate actin filaments, and the rate of this nucleation is a function of the concentrations of both WASp WA and the Arp2/3 complex. With excess WASp WA and <10 nM Arp2/3 complex, there is a 1:1 correspondence between the Arp2/3 complex and the concentration of filaments produced, but the filament concentration plateaus at an Arp2/3 complex concentration far below the cellular concentration determined to be 9.7 microM in human neutrophils. Preformed filaments increase the rate of nucleation by WASp WA and the Arp2/3 complex but not the number of filaments that are generated. We propose that filament side binding by the Arp2/3 complex enhances its activation by WASp WA.     

An Arabidopsis Class II Formin,AtFH19, Nucleates Actin Assembly,Binds to the Barbed End of Actin Filaments and Antagonizes the Effect of AtFH1 on Actin Dynamics

Formin is a major protein responsible for regulating the nucleation of actin filaments, and as such, it permits the cell to control where and when to assemble actin arrays. It is encoded by a multigene family comprising 21 members in Arabidopsis thaliana. The Arabidopsis formins can be separated into two phylogenetically-distinct classes: there are 11 class I formins and 10 class II formins. Significant questions remain unanswered regarding the molecular mechanism of actin nucleation and elongation stimulated by each formin isovariant, and how the different isovariants coordinate to regulate actin dynamics in cells. Here, we characterize a class II formin, AtFH19, biochemically. We found that AtFH19 retains all general properties of the formin family, including nucleation and barbed end capping activity. It can also generate actin filaments from a pool of actin monomers bound to profilin. However, both the nucleation and barbed end capping activities of AtFH19 are less efficient compared to those of another well-characterized formin, AtFH1. Interestingly, AtFH19 FH1FH2 competes with AtFH1 FH1FH2 in binding actin filament barbed ends, and inhibits the effect of AtFH1 FH1FH2 on actin. We thus propose a mechanism in which two quantitatively different formins coordinate to regulate actin dynamics by competing for actin filament barbed ends.     

Inhibition of the Arp2/3 complex-nucleated actin polymerization and branch formation by tropomyosin

The actin filament network immediately under the plasma membrane at the leading edge of rapidly moving cells consists of short, branched filaments, while those deeper in the cortex are much longer and are rarely branched. Nucleation by the Arp2/3 complex activated by membrane-bound factors (Rho-family GTPases and PIP(2)) is postulated to account for the formation of the branched network. Tropomyosin (TM) binds along the sides of filaments and protects them from severing proteins and pointed-end depolymerization in vitro. Here, we show that TM inhibits actin filament branching and nucleation by the Arp2/3 complex activated by WASp-WA. Tropomyosin increases the lag at the outset of polymerization, reduces the concentration of ends by 75%, and reduces the number of branches by approximately 50%. We conclude that TM bound to actin filaments inhibits their ability to act as secondary activators of nucleation by the Arp2/3 complex. This is the first example of inhibition of branching by an actin binding protein. We suggest that TM suppresses the nucleation of actin filament branches from actin filaments in the deep cortex of motile cells. Other abundant actin binding proteins may also locally regulate the branching nucleation by the Arp2/3 complex in cells.     

Interaction of thymosin beta 4 with muscle and platelet actin: implications for actin sequestration in resting platelets.

Quantitative measurements of the interactions of T beta 4 with muscle actin suggest that its only physiological role is monomer sequestration. T beta 4 forms a 1:1 complex with monomeric actin under physiological salt conditions. Its Kd for actin is not affected by calcium. T beta 4 binds only to actin monomers and not to filament ends or alongside the filament. T beta 4-actin complexes do not elongate actin filaments at either the barbed or the pointed end, and, unlike actobindin, T beta 4 does not specifically suppress the nucleation of polymerization. We assessed the fraction of monomeric actin that can be sequestered by T beta 4 in resting platelets. This was done on the basis of (a) its Kd of 0.4-0.7 microM for platelet actin, which had been prepared by a newly devised simpler method, and (b) the values for the concentrations of monomeric actin and of T beta 4 which we measured as 280 and 560 microM, respectively. Using the higher Kd value of 0.7 microM, the T beta 4-complexed actin is calculated to be between 70 and 240 microM, depending on the steady-state free G-actin concentration. This may vary from 0.1 to 0.5 microM, the critical concentrations for uncapped and for fully barbed-end-capped actin filaments. If the Kd in the platelet is the same as in vitro, most of the sequestered actin would be bound to T beta 4 if more than 95% of the actin filaments are capped at their barbed ends in resting platelets.     

Equilibrium constant for binding of an actin filament capping protein to the barbed end of actin filaments

Depolymerization of treadmilling actin filaments by a capping protein isolated from bovine brain was used for determination of the equilibrium constant for binding of the capping protein to the barbed ends of actin filaments. When the capping protein blocks monomer consumption at the lengthening barbed ends, monomers continue to be produced at the shortening pointed ends until a new steady state is reached in which monomer production at the pointed ends is balanced by monomer consumption at the uncapped barbed ends. In this way the ratio of capped to uncapped filaments could be determined as a function of the capping protein concentration. Under the experimental conditions (100 mM KCl and 2 mM MgCl2, pH 7.5, 37 degrees C) the binding constant was found to be about 2 X 10(9) M-1. Capping proteins effect the actin monomer concentration only at capping protein concentrations far above the reciprocal of their binding constant. Half-maximal increase of the monomer concentration requires capping of about 99% of the actin filaments. A low proportion of uncapped filaments has a great weight in determining the monomer concentration because association and dissociation reactions occur at the dynamic barbed ends with higher frequencies than at the pointed ends.     

Plant villin, lily P-135-ABP, possesses G-actin binding activity and accelerates the polymerization and depolymerization of actin in a Ca2+-sensitive manner

From germinating pollen of lily, two types of villins, P-115-ABP and P-135-ABP, have been identified biochemically. Ca(2+)-CaM-dependent actin-filament binding and bundling activities have been demonstrated for both villins previously. Here, we examined the effects of lily villins on the polymerization and depolymerization of actin. P-115-ABP and P-135-ABP present in a crude protein extract prepared from germinating pollen bound to a DNase I affinity column in a Ca(2+)-dependent manner. Purified P-135-ABP reduced the lag period that precedes actin filament polymerization from monomers in the presence of either Ca(2+) or Ca(2+)-CaM. These results indicated that P-135-ABP can form a complex with G-actin in the presence of Ca(2+) and this complex acts as a nucleus for polymerization of actin filaments. However, the nucleation activity of P-135-ABP is probably not relevant in vivo because the assembly of G-actin saturated with profilin, a situation that mimics conditions found in pollen, was not accelerated in the presence of P-135-ABP. P-135-ABP also enhanced the depolymerization of actin filaments during dilution-mediated disassembly. Growth from filament barbed ends in the presence of Ca(2+)-CaM was also prevented, consistent with filament capping activity. These results suggested that lily villin is involved not only in the arrangement of actin filaments into bundles in the basal and shank region of the pollen tube, but also in regulating and modulating actin dynamics through its capping and depolymerization (or fragmentation) activities in the apical region of the pollen tube, where there is a relatively high concentration of Ca(2+).     

Control of actin polymerization in live and permeabilized fibroblasts

We have investigated the spatial control of actin polymerization in fibroblasts using rhodamine-labeled muscle actin in; (a) microinjection experiments to follow actin dynamics in intact cells, and (b) incubation with permeabilized cells to study incorporation sites. Rhodamine-actin was microinjected into NIH-3T3 cells which were then fixed and stained with fluorescein-phalloidin to visualize total actin filaments. The incorporation of newly polymerized actin was assayed using rhodamine/fluorescein ratio-imaging. The results indicated initial incorporation of the injected actin near the tip and subsequent transport towards the base of lamellipodia at rates greater than 4.5 microns/min. Furthermore, both fluorescein- and rhodamine-intensity profiles across lamellipodia revealed a decreasing density of actin filaments from tip to base. From this observation and the presence of centripetal flux of polymerized actin we infer that the actin cytoskeleton partially disassembles before it reaches the base of the lamellipodium. In permeabilized cells we found that, in agreement with the injection studies, rhodamine-actin incorporated predominantly in a narrow strip of less than 1-microns wide, located at the tip of lamellipodia. The critical concentration for the rhodamine-actin incorporation (0.15 microM) and its inhibition by CapZ, a barbed-end capping protein, indicated that the nucleation sites for actin polymerization most likely consist of free barbed ends of actin filaments. Because any potential monomer-sequestering system is bypassed by addition of exogenous rhodamine-actin to the permeabilized cells, these observations indicate that the localization of actin incorporation in intact cells is determined, at least in part, by the presence of specific elongation and/or nucleation sites at the tips of lamellipodia and not solely by localized desequestration of subunits. We propose that the availability of the incorporation sites at the tips of lamellipodia is because of capping activities which preferentially inhibit barbed-end incorporation elsewhere in the cell, but leave barbed ends at the tips of lamellipodia free to add subunits.     

Interactions of ADF/cofilin, Arp2/3 complex, capping protein and profilin in remodeling of branched actin filament networks

BACKGROUND: Cellular movements are powered by the assembly and disassembly of actin filaments. Actin dynamics are controlled by Arp2/3 complex, the Wiskott-Aldrich syndrome protein (WASp) and the related Scar protein, capping protein, profilin, and the actin-depolymerizing factor (ADF, also known as cofilin). Recently, using an assay that both reveals the kinetics of overall reactions and allows visualization of actin filaments, we showed how these proteins co-operate in the assembly of branched actin filament networks. Here, we investigated how they work together to disassemble the networks. RESULTS: Actin filament branches formed by polymerization of ATP-actin in the presence of activated Arp2/3 complex were found to be metastable, dissociating from the mother filament with a half time of 500 seconds. The ADF/cofilin protein actophorin reduced the half time for both dissociation of gamma-phosphate from ADP-Pi-actin filaments and debranching to 30 seconds. Branches were stabilized by phalloidin, which inhibits phosphate dissociation from ADP-Pi-filaments, and by BeF3, which forms a stable complex with ADP and actin. Arp2/3 complex capped pointed ends of ATP-actin filaments with higher affinity (Kd approximately 40 nM) than those of ADP-actin filaments (Kd approximately 1 microM), explaining why phosphate dissociation from ADP-Pi-filaments liberates branches. Capping protein prevented annealing of short filaments after debranching and, with profilin, allowed filaments to depolymerize at the pointed ends. CONCLUSIONS: The low affinity of Arp2/3 complex for the pointed ends of ADP-actin makes actin filament branches transient. By accelerating phosphate dissociation, ADF/cofilin promotes debranching. Barbed-end capping proteins and profilin allow dissociated branches to depolymerize from their free pointed ends.     

Actin filament branching and protrusion velocity in a simple 1D model of a motile cell

We formulate and analyse a 1D model for the spatial distribution of actin density at the leading edge of a motile cell. The model incorporates nucleation, capping, growth and decay of actin filaments, as well as retrograde flow of the actin meshwork and known parameter values based on the literature. Using a simplified geometry, and reasonable assumptions about the biochemical processes, we derive PDEs for the density of actin filaments and their tips. Analytic travelling wave solutions are used to predict how the speed of the cell depends on rates of nucleation, capping, polymerization and membrane resistance. Analysis and simulations agree with experimental profiles for measured actin distributions. Extended versions of the model are studied numerically. We find that our model produces stable travelling wave solutions with reasonable cell speeds. Increasing the rate of nucleation of filaments (by the actin related protein Arp2/3) or the rate of actin polymerization leads to faster cell speed, whereas increasing the rate of capping or the membrane resistance reduces cell speed. We consider several variants of nucleation (spontaneous, tip, and side branching) and find best agreement with experimentally measured spatial profiles of filament and tip density in the side branching case.     

Barbed end-capping protein regulates polarity of actin filaments from the human erythrocyte membrane

The directional polymerization of G actin on single-layered erythrocyte membranes has been examined in the presence or absence of a barbed end-capping protein isolated from sea urchin eggs. When in the absence of the capping protein the single-layered erythrocyte membranes were incubated with 2 microM of G actin, exceeding the critical concentrations, about half of polymerized actin filaments became orientated with arrowheads of heavy meromyosin pointing toward the membrane at 2 microM of G actin. In contrast, in the presence of the capping protein, nearly 90% of the polymerized filaments were directed with arrowheads of HMM pointing away from the membranes. Furthermore, only preincubation of the erythrocyte membranes with the capping protein is effective to a similar extent in regulating the polarity of actin filaments from the membranes. The results obtained are discussed particular as regards to the physiological roles of the barbed end-capping protein in situ.     

Capping protein increases the rate of actin-based motility by promoting filament nucleation by the Arp2/3 complex

Capping protein (CP) is an integral component of Arp2/3-nucleated actin networks that drive amoeboid motility. Increasing the concentration of capping protein, which caps barbed ends of actin filaments and prevents elongation, increases the rate of actin-based motility in vivo and in vitro. We studied the synergy between CP and Arp2/3 using an in vitro actin-based motility system reconstituted from purified proteins. We find that capping protein increases the rate of motility by promoting more frequent filament nucleation by the Arp2/3 complex and not by increasing the rate of filament elongation as previously suggested. One consequence of this coupling between capping and nucleation is that, while the rate of motility depends strongly on the concentration of CP and Arp2/3, the net rate of actin assembly is insensitive to changes in either factor. By reorganizing their architecture, dendritic actin networks harness the same assembly kinetics to drive different rates of motility.     

Molecular cloning of human macrophage capping protein cDNA. A unique member of the gelsolin/villin family expressed primarily in macrophages.

Macrophage capping protein (MCP) is a Ca(2+)-sensitive protein which reversibly blocks the barbed ends of actin filaments but does not sever preformed actin filaments. The human cDNA for MCP has been cloned and sequenced. The derived amino acid sequence predicts a polypeptide of 38.4 kDa. Human MCP expressed in Escherichia coli using a pET12a vector was functionally identical to the native protein purified from rabbit alveolar macrophages with respect to Ca2+ sensitivity and ability to block monomer exchange at the barbed end of actin filaments. Sequence comparison with other actin-binding protein sequences indicates that MCP is a member of the gelsolin/villin family of barbed end blocking proteins. Unlike gelsolin, this protein has a limited tissue distribution being detected primarily in macrophages where it was abundant, representing 0.9-1% of the total cytoplasmic protein. Northern blot analysis of U937 and HL60 cells differentiated to macrophage-like cells demonstrated that MCP message increases to 2.6 and greater than 7 times initial levels, respectively. Human MCP displays a 93% amino acid sequence identity with two recently described mouse proteins, gCap39 and Mbh1. Its abundance in macrophages and the corresponding increases in mRNA levels upon promyelocyte and monocyte development into macrophages indicate that MCP may play an important role in macrophage function.