The relation of canine size to pattern and extent of attrition in baboons

For most genera of animals the association between dental morphology and diet is such that inferences concerning the diet can be made on the basis of the dentition alone. The canine is the one tooth that appears exempt from such generalisation and exhibits a wide range of variability of size and shape in all groups. In order to determine the effect of dimorphism of the canine on the dental apparatus, male and female specimens of Theropithecus and Papio baboons were examined. Occlusal relationships and dental pathology for 21 Theropithecus and 40 Papio skulls were recorded, and crown height measurements obtained for maxillary incisors, buccal and lingual molar cusps. Attrition was the most common and severe cause of abscess formation in older animals: the pattern of attrition differed in adult males and females, the latter showing more wear of the incisor and lingual molar cusps. Partial correlations for incisor, buccal and lingual molar cuspal crown height show a significant correlation between incisor and lingual cusp attrition in juveniles of both sexes and adult females (p < 0.01). Adult males show no correlation of attrition. It is proposed that the correlation of incisor and lingual molar cusp attrition is associated with anterior-posterior grinding movements, such as take place during incision, that the large canine present in the male limits such movements, the sharp blade-like canine being employed as a cutting tool. This use of the canine by reducing functional demands on other teeth, prolongs the utility of the dental apparatus, and hence the lifespan of its possessor.     

Canine "honing" in Australopithecus afarensis

The maxillary canines of Australopithecus afarensis show a distal wear facet that extends from the apex of the crown to a point near the distal cingulum. Although these facets bear a superficial resemblance to the honing facets found on the projecting portions of the canines of other anthropoids, a more detailed examination provided in this paper shows that they are not homologous or functionally equivalent. The facets are not related to the use of the maxillary canine as a weapon or as an additional masticatory surface. Instead, their presence in A. afarensis represented a blunting or dulling of the posterior edge of C so that its occlusion with P3 would be consistent with cheek tooth occlusion.     

A nonadaptive dental trait

Compared to other anthropoid females, female cercopithecoids possess hypertrophied honing premolars (P₃) yet lack hypertrophied maxillary canines. In addition, female cercopithecoid maxillary canines are often tip-blunted, the crown rarely extends down to the entire shearing surface on the buccal face of P₃, and honing wear is usually confined to a small fraction of its hypertrophied buccal surface. The likely reason why the female P₃ has an unusually long buccal face is that genes involved in the expression of this morphology are also in males, for which the hypertrophied condition is adaptive—it serves as the honing surface for their hypertrophied canines. The data suggest that the hypertrophied P₃ of females is the correlated and nonadaptive response of an homologous characteristic. The possibility that this occurs in other female anthropoids and in other parts of the C/P complex is discussed, as well as the relevance of this phenomenon for understanding human canine evolution and identifying other traits which may also be examples of correlated response.     

Wear Fast,Die Young: More Worn Teeth and Shorter Lives in Iberian Compared to Scottish Red Deer

Teeth in Cervidae are permanent structures that are not replaceable or repairable; consequently their rate of wear, due to the grinding effect of food and dental attrition, affects their duration and can determine an animal''s lifespan. Tooth wear is also a useful indicator of accumulative life energy investment in intake and mastication and their interactions with diet. Little is known regarding how natural and sexual selection operate on dental structures within a species in contrasting environments and how these relate to life history traits to explain differences in population rates of tooth wear and longevity. We hypothesised that populations under harsh environmental conditions should be selected for more hypsodont teeth while sexual selection may maintain similar sex differences within different populations. We investigated the patterns of tooth wear in males and females of Iberian red deer (Cervus elaphus hispanicus) in Southern Spain and Scottish red deer (C. e. scoticus) across Scotland, that occur in very different environments, using 10343 samples from legal hunting activities. We found higher rates of both incisor and molar wear in the Spanish compared to Scottish populations. However, Scottish red deer had larger incisors at emergence than Iberian red deer, whilst molars emerged at a similar size in both populations and sexes. Iberian and Scottish males had earlier tooth depletion than females, in support of a similar sexual selection process in both populations. However, whilst average lifespan for Iberian males was 4 years shorter than that for Iberian females and Scottish males, Scottish males only showed a reduction of 1 year in average lifespan with respect to Scottish females. More worn molars were associated with larger mandibles in both populations, suggesting that higher intake and/or greater investment in food comminution may have favoured increased body growth, before later loss of tooth efficiency due to severe wear. These results illustrate how independent selection in both subspecies, that diverged 11,700 years BP, has resulted in the evolution of different longevity, although sexual selection has maintained a similar pattern of relative sex differences in tooth depletion. This study opens interesting questions on optimal allocation in life history trade-offs and the independent evolution of allopatric populations.     

Sex differences in tooth wear ofMacaca fuscata,the Arashiyama-A troop in Texas

The incidence of tooth wear was studied in a wild troop ofM. fuscata, that had previously been transplanted from Arashiyama, Japan, to Texas. This study was undertaken to determine differences of attrition between males and females, and between maxillary and mandibular dentitions. Contrary to other findings, the rate of wear was not found to be an expression of sex difference, but seemed rather related to function. The following observations may suffice as examples: The mandibular third premolars function as a honing surface for the maxillary canines, and experience greater wear over time in males due to their proximity to smaller canines which leave their neighbors more vulnerable to wear. The degree of attrition intensity is neither the same for males and females, nor the maxillary and mandibular dentitions. Certain maxillary and mandibular teeth “pair up”; although all “pairs” are identical in males and females, they rank differently in the degree of wear experienced. Overall, females express greater attrition in the maxillary, and males in the mandibular dentitions.     

A tooth at the border of two morphogenetic fields

A tooth at the border between two morphogenetic fields (mandibular canine and honing premolar) may become morphologically similar to and/or functionally incorporated with the teeth of either field. In light of this, observations of the morphology and occlusion of female anthropoid C1s from 58 extant species are presented to assess whether and to what extent they exhibit incisor-like form and function. Female C1s in 74% of the taxa observed exhibit well developed incisor-like traits which may reflect field border phenomena. In another 9%, incisor traits are present but they are not examples of field border phenomena. Interspecies variation in female C1 morphology is related to behavior, function, natural selection and phyletic inertia. A selection model, derived from the data, is used to explain C1 sexual dimorphism and the evolution of male and female human canines. The data's relevance to the field vs clone theory debate is also discussed.     

Ultrastructure and the importance of wear in the dentition of the halfbeak (Pisces: Hemiramphidae) pharyngeal mill

To assess how tooth microstructure and composition might facilitate the pharyngeal mill mechanism of halfbeaks, apatite structure and iron content were determined by scanning electron microscopy and energy dispersive X‐ray analysis for Hyporhamphus regularis ardelio, Arrhamphus sclerolepis krefftii, and Hemiramphus robustus. Iron was present in developing teeth and was concentrated along the shearing edge of spatulate incisiform teeth, which dominate the occlusive wear zone in all three species. A model based on tooth structure and wear rate is proposed to explain how halfbeaks maintain a fully functional occlusion zone throughout growth and consequent tooth addition and replacement. Replacement teeth erupt and wear rapidly so that a constant occlusion plane is always present. Iron within the tooth tissue reduces the wear rate of the cutting edge while simultaneously maintaining its sharpness and efficiency. J. Morphol. 2009. © 2008 Wiley‐Liss, Inc.     

Canine role in dental wear patterns: Macaca nemestrina

A study of variables and patterns in dental wear among 30 individuals in a colony of Macaca nemestrina shows that consideration of age and sex are crucial for understanding differential wear degrees on molar occlusal planes. With advanced age, this species of non-human primate undergoes obliteration of initial morphological characteristics through the gradual erosion of enamel. Wear gradients are differential from PM1-M3 in both sexes. It appears that there is a functional relationship between degrees of occlusal plane wear and the degree of wear on the canines, and that females show a greater degree of wear changes relative to males of equivalent age because of initial differences in canine length and robusticity due to sexual dimorphism. It appears that there is a direct relationship between occlusal wear plane changes and the degree of wear on the canines, with advanced differential wear showing up in individuals in whom years of maxillary canine honing, canine damage, and the normal wear of mastication has reduced dimensions of unworn permanent canines. Other considerations included in this study are the honing functions of the deciduous first mandibular molars and molar cusp height relative to canine function.     

Dental wear among cercopithecid monkeys of the Taï forest,Côte d'Ivoire

Studies of dental macrowear can be useful for understanding masticatory and ingestive behavior, life history, and for inferring dietary information from the skeletal material of extinct and extant primates. Such studies to date have tended to focus on one or two teeth, potentially missing information that can be garnered through examination of wear patterns across the tooth row. Our study measured macrowear in the postcanine teeth of three sympatric cercopithecid species from the Taï Forest, Côte d'Ivoire (Cercocebus atys, Procolobus badius, and Colobus polykomos), whose diets have been well‐described. Inter‐specific analyses suggest that different diets and ingestive behaviors are characterized by different patterns of wear across the molar row, with Cercocebus atys emphasizing tooth use near P₄‐M₁, P. badius emphasizing a large amount of tooth use near M₂‐M₃, and Colobus polykomos exhibiting wear more evenly across the postcanine teeth. Information regarding differential tooth use across the molar row may be more informative than macrowear analysis of isolated teeth for making inferences about primate feeding behavior. Am J Phys Anthropol 150:655–665, 2013. © 2013 Wiley Periodicals, Inc.     

Evolution of the mandibular third premolar crown in early Australopithecus

The Pliocene hominins Australopithecus anamensis and Australopithecus afarensis likely represent ancestor-descendent taxa—possibly an anagenetic lineage—and capture significant change in the morphology of the canine and mandibular third premolar (P₃) crowns, dental elements that form the canine honing complex in nonhuman catarrhines. This study focuses on the P₃ crown, highlighting plesiomorphic features in A. anamensis. The A. afarensis P₃ crown, in contrast, is variable in its expression of apomorphic features that are characteristic of geologically younger hominins. Temporal variation characterizes each taxon as well. The A. anamensis P₃ from Allia Bay, Kenya expresses apomorphic character states, shared with A. afarensis, which are not seen in the older sample of A. anamensis P₃s from Kanapoi, Kenya, while spatiotemporal differences in shape exist within the A. afarensis hypodigm. The accumulation of derived features in A. afarensis results in an increased level of P₃ molarisation. P₃ molarisation did not evolve concurrent with postcanine megadontia and neither did the appearance of derived aspects of P₃ occlusal form coincide with the loss of canine honing in hominins, which is apparent prior to the origin of the genus Australopithecus. A. afarensis P₃ variation reveals the independence of shape, size, and occlusal form. The evolution of the P₃ crown in early Australopithecus bridges the wide morphological gap that exists between geologically younger hominins on the one hand and extant apes and Ardipithecus on the other.     

Selective distortion of the planar group CαC'(O)O to a chiral flat tetrahedron in the amino acid alanine

Based on a Cambridge Structural Database (CSD) search, a meta‐analysis of 116 structures of alanine H₃NC_αH(CH₃)C′(O)O and its derivatives H₃NC_αH(CH₃)C′(O)O(H/R/M), protonated, esterified, or coordinated at the carboxylic group, shows that in the first step of a chirality chain, the L configuration at C_α induces (M) and (P) conformations with respect to rotation around the central C′─C_α bond. In the second step, the (M) and (P) conformations selectively distort the planar carboxylic group C_αC'(O_cis)O_trans to asymmetric flat (R) and (S) tetrahedra. High diastereoselectivities are caused by the two players attraction N…O_cis and repulsion O_trans…C_Me, which work together in (L,M,R) configurations but against each other in (L,P,S) configurations.     

Theropod dinosaur teeth from the lowermost Cretaceous Rabekke Formation on Bornholm, Denmark

The dinosaur fauna of the palynologically dated lower Berriasian Skyttegård Member of the Rabekke Formation on the Baltic island of Bornholm, Denmark, is represented by isolated tooth crowns. The assemblage is restricted to small maniraptoran theropods, assigned to the Dromaeosauridae incertae sedis and Maniraptora incertae sedis. The dromaeosaurid teeth are characterized by their labiolingually compressed and distally curved crowns that are each equipped with a lingually flexed mesial carina and a distinctly denticulated distal cutting edge. A morphologically aberrant tooth crown (referred to as Maniraptora incertae sedis) has triangular denticles of uneven width, a feature occasionally found in Upper Cretaceous hesperornithiform toothed diving birds, but also in premaxillary teeth of the velociraptorine Nuthetes from the Lower Cretaceous of England.     

Performance Enhancement of Polymer‐Free Carbon Nanotube Solar Cells via Transfer Matrix Modeling

Polymer‐free (6,5) single‐walled carbon nanotubes (SWCNTs) prepared using the gel permeation approach are integrated into SWCNT:C₆₀ solar cells. Evaporation‐driven self‐assembly is used to form large‐area SWCNT thin films from the surfactant‐stabilized aqueous suspensions. The thicknesses of various layers within the solar cell are optimized by theoretical modeling using transfer matrix calculations, where the distribution of the electric field within the stack is matched to light absorption by the SWCNTs through either their primary (S₁₁) or secondary (S₂₂) absorption peaks, or a combination thereof. The validity of the model is verified experimentally through a detailed parameter study and then used to develop SWCNT:C₆₀ solar cells with high open‐circuit voltage (0.44 V) as well as a cutting‐edge internal quantum efficiency of up to 86% through the nanotube S₁₁ transition, over an active area of 0.105 cm².     

Anterior dental cutting in the Laetolil hominids and the evolution of the bicuspid P3

The younger Laetolil hominids provide evidence of a unique anterior cutting complex with a chisel-like action occurring between the lingual-distal C face and a transverse ridge on the P₃ perpendicular to it, extending between the subequal cusps. An earlier adaptation to more efficient grinding may have resulted in reduced canine projection and the development of the lingual P₃ cusp, raising the ridge between it and the buccal cusp. This development acted to retain the anterior cutting function by shifting it to the top of the premolar.     

Anterior dental evolution in the Australopithecus anamensis–afarensis lineage

Australopithecus anamensis is the earliest known species of the Australopithecus–human clade and is the likely ancestor of Australopithecus afarensis. Investigating possible selective pressures underlying these changes is key to understanding the patterns of selection shaping the origins and early evolution of the Australopithecus–human clade. During the course of the Au. anamensis–afarensis lineage, significant changes appear to occur particularly in the anterior dentition, but also in jaw structure and molar form, suggesting selection for altered diet and/or food processing. Specifically, canine tooth crown height does not change, but maxillary canines and P₃s become shorter mesiodistally, canine tooth crowns become more symmetrical in profile and P₃s less unicuspid. Canine roots diminish in size and dimorphism, especially relative to the size of the postcanine teeth. Molar crowns become higher. Tooth rows become more divergent and symphyseal form changes. Dietary change involving anterior dental use is also suggested by less intense anterior tooth wear in Au. afarensis. These dental changes signal selection for altered dietary behaviour and explain some differences in craniofacial form between these taxa. These data identify Au. anamensis not just as a more primitive version of Au. afarensis, but as a dynamic member of an evolving lineage leading to Au. afarensis, and raise intriguing questions about what other evolutionary changes occurred during the early evolution of the Australopithecus–human clade, and what characterized the origins of the group.     

3D Simulation Modeling of the Tooth Wear Process

Severe tooth wear is the most common non-caries dental disease, and it can seriously affect oral health. Studying the tooth wear process is time-consuming and difficult, and technological tools are frequently lacking. This paper presents a novel method of digital simulation modeling that represents a new way to study tooth wear. First, a feature extraction algorithm is used to obtain anatomical feature points of the tooth without attrition. Second, after the alignment of non-attrition areas, the initial homogeneous surface is generated by means of the RBF (Radial Basic Function) implicit surface and then deformed to the final homogeneous by the contraction and bounding algorithm. Finally, the method of bilinear interpolation based on Laplacian coordinates between tooth with attrition and without attrition is used to inversely reconstruct the sequence of changes of the 3D tooth morphology during gradual tooth wear process. This method can also be used to generate a process simulation of nonlinear tooth wear by means of fitting an attrition curve to the statistical data of attrition index in a certain region. The effectiveness and efficiency of the attrition simulation algorithm are verified through experimental simulation.     

Functional morphology of the gastric mills of carnivorous,omnivorous, and herbivorous land crabs

Terrestrial decapods consume a wide variety of plant and animal material. The potential adaptations of carnivorous, omnivorous, and herbivorous terrestrial crustaceans were studied by examining the functional morphology of the gastric mill. Two closely related species from each feeding preference group were examined to identify which features of the mill were due to phylogeny and which were due to adaptation. The morphology of the gastric mill matched the diet well; the gastric mills of the carnivorous species (Geograpsus grayi and Geograpsus crinipes) possessed a blunt, rounded medial tooth and flattened lateral teeth with a longitudinal grinding groove. These features make them well suited to a carnivorous diet of soft animal tissue as well as hard material, such as arthropod exoskeleton. In contrast, the mill of the herbivorous gecarcinids (Gecarcoidea natalis and Discoplax hirtipes) consisted of a medial tooth with sharp transverse ridges and lateral teeth with sharp interlocking cusps and ridges and no grinding surface. These features would efficiently shred fibrous plant material. The morphology of the mill of the omnivorous coenobitids (Coenobita perlatus and Birgus latro) was more generalized toward a mixed diet. However, the mill of B. latro was more adapted to deal with highly nutritious food items, such as nuts and heavily calcified decapods. Its mill possessed lateral teeth with extended ridges, which sat close to the calcified cardiopyloric valve to form a flattened floor. Hard items trapped in the mill would be crushed against this surface by the medial tooth. J. Morphol. 2010. © 2009 Wiley‐Liss, Inc.     

Unicausal theories of human canine evolution: are they sufficient?

Most theories of human canine evolution are unicausal and only purport to explain size and related shape changes in human canines. The present work tests whether one of the morphological changes, dulling of the distal edge of the maxillary canine, can be entirely explained as a byproduct of changes in the overall shape of the canine. The data show that the distal edge of maxillary canines of A. afarensis became far duller than would be predicted from changes in crown shape. The greater than expected dullness of the distal edge can be explained by evolutionary changes in the genetic field for cheek tooth morphology. This suggests that human canine evolution is complex and cannot be accounted for by unicausal theories.     

Dental pathologies in ten free-ranging chimpanzees from Gombe National Park, Tanzania

The dental remains of ten adult chimpanzees from Gombe National Park, Tanzania, were examined for enamel attrition, caries, abscesses, periodontal disease, and tooth loss. Age was the underlying factor in the development of dental pathology, in that enamel wear was present to some extent in all ten but was uniformly severe only in the three for whom estimated age at death was 39-43 years. In turn, enamel wear appears to have been the direct cause of abscess development, periodontal disease, and tooth loss. Periodontal disease was commonly expressed as alveolar resorption, particularly around the premolars and molars. This involvement was variable in all except the two youngest. Some interesting wear patterns were evident in the form of deep grooves in the upper incisors and dramatic notching of the lower canines. These patterns, and enamel attrition in general, were attributed to normal mastication and to various stripping activities. Only one carious lesion was observed, in a male with an estimated age of 26 years. An accurate assessment of the actual prevalence of caries was obscured by enamel wear and tooth loss in the older individuals.