Microsequence analysis of peptides and proteins. IX. Manual gas-phase microsequencing of multiple samples

A novel apparatus for performing manual gas-phase Edman chemistry on protein and peptide samples is described. Edman chemistry is performed in 6 to 10 Teflon continuous flow reactors (CFR), previously described by J.E. Shively et al. (1987) Anal. Biochem. 163, 517-529). The CFRs are packed with 10-15 mg of Polybrene-coated spherical silica (Porasil B, Waters Associates). The gas-phase coupling reagent and cleavage reagent are 5% aqueous triethylamine and anhydrous trifluoroacetic acid, respectively, delivered by a stream of argon gas. The delivery of the gas-phase reagents is manually controlled with Hamilton 3-way valves and 2-way valves, and that of the solvents, ethyl acetate and butyl chloride, by syringe pipetting. The average cycle time is 15-20 min for 6 to 10 samples run simultaneously. Conversion of the anilinothiazolinone to phenylthiohydantoin (PTH) amino acid derivatives is accomplished manually with 25% aqueous trifluoroacetic acid. The PTH amino acids are analyzed by reversed-phase HPLC using an autosampler for handling multiple samples. Excellent results were obtained in the 100-200 pmol range. Protein samples can be sequenced from 15-20 cycles, and peptide samples usually to the COOH terminus. Initial yields ranged from 30 to 60% and repetitive yields ranged from 90 to 96%. The sample washout and size of background peaks are significantly reduced, compared to older methods of manual sequence analysis. The yields and background signal to noise are comparable to automated gas-phase Edman chemistry. The improved manual Edman described represents a low cost alternative to automated sequence analysis, and has the advantage being able to process multiple samples simultaneously.     

Microsequence analysis of peptides and proteins : III. Artifacts and the effects of impurities on analysis

Levels of contaminants in the parts-per-billion range can adversely affect amino acid microsequence analysis (low-nanomole to subnanomole range) in two ways; (a) contaminants in solvents used in the purification of proteins and peptides can derivatize reactive amino acids to form unusual products or react with free α-NH₂ groups to effectively prevent sequence analysis, and (b) contaminants in the reagents and solvents used in Edman chemistry can give spurious peaks on HPLC analysis of amino acid phenythiohydantoin derivatives or react with the phenylthiocarbamylpeptidyl derivatives to give lower initial and repetitive yields of the subsequent phenylthiohydantoin derivatives. Practical examples of these problems and their solutions are described. With proper care in the preparation of solvents and reagents for sample purification and Edman chemistry, microsequence analysis in the low-nanomole to subnanomole range can be made routine.     

Sequence from picomole quantities of proteins electroblotted onto polyvinylidene difluoride membranes

Small amounts (7-250 pmol) of myoglobin, beta-lactoglobulin, and other proteins and peptides can be spotted or electroblotted onto polyvinylidene difluoride (PVDF) membranes, stained with Coomassie Blue, and sequenced directly. The membranes are not chemically activated or pretreated with Polybrene before usage. The average repetitive yields and initial coupling of proteins spotted or blotted into PVDF membranes ranged between 84-98% and 30-108% respectively, and were comparable with the yields measured for proteins spotted onto Polybrene-coated glass fiber discs. The results suggest that PVDF membranes are superior supports for sequence analysis of picomole quantities of proteins purified by gel electrophoresis.     

Microsequence analysis of peptides and proteins. V. Design and performance of a novel gas-liquid-solid phase instrument

We describe the construction and performance of a novel, automated, Edman chemistry-based microsequencer. The reagent and solvent delivery system, the reaction cartridge for coupling and cleavage, and the conversion flask are all constructed from chemically inert perfluoroelastomers. The delivery valves are of a new design incorporating the use of electromagnetically actuated solenoids and zero-dead-volume construction, and may be connected in a modular fashion resulting in multiple inputs with a single output line which can be flushed with inert gas. The bottle closures are of a new design based on an all-Teflon compression fitting. The reaction cartridge and conversion flask are thermostated by solid-state heaters in an aluminum block. The overall size of the instrument is 25 X 34 X 14 in. The chemistry utilizes 2% aqueous triethylamine as the coupling base which is delivered to the reaction cartridge via a stream of nitrogen. The "gas-phase" delivery of the coupling base and the cleavage acid (trifluoroacetic acid) is modeled after the method described by R. M. Hewick et al. (J. Biol. Chem. 256, 7990-7997,1981). The instrument has performed well over a period of 3 years in terms of low background peaks, sensitivity in the picomole range, and reliability of operation. The use of economical components, ease of construction and operation, and sensitive analytical capability make this instrument a useful tool for microsequence analysis of peptides and proteins.     

Accelerated high-sensitivity microsequencing of proteins and peptides using a miniature reaction cartridge.

Greatly reduced automated protein sequencing degradation times of less than 25 min with concurrent on-line phenylthiohydantoin (PTH) derivative analysis times of less than 16 min have been achieved by using a miniaturized reaction cartridge with optimized chemical and analytical cycles. Using this method a wide range of standard and novel peptides and proteins have been sequenced with reproducibly high initial and repetitive cycle yields. In these accelerated analyses the recovery of the more labile PTH derivatives was markedly improved by using elevated pressure during cleavage steps and temperature programming throughout the Edman cycle.     

Microsequence analysis of winged bean seed proteins electroblotted from two-dimensional gel

Electroblotting method employing a semidry blotting apparatus for the subsequent protein microsequence analysis (Hirano, 1987) was improved. This method is convenient and allows rapid and efficient transfer of the proteins from a polyacrylamide gel (1 mm thick) onto the Polybrene-coated glass-fiber sheet or polyvinylidene difluoride membrane filter in only 20 min. The electroblotted proteins could be sequenced directly with the gas-phase protein sequencer at a 20-pmole level. This method was applied to the sequence analysis of winged bean seed proteins. A portion of the crude extracts from only one-twentieth of a seed of the winged bean was separated by two-dimensional polyacrylamide gel electrophoresis and electroblotted, and the N-terminal amino acid sequences of the blotted proteins were analyzed. The sequences of about 60% of the blotted major proteins, including nine Kunitz trypsin inhibitor-like proteins with heterogeneity in the N-terminal sequences, a protein that has a homologous sequence to the leghaemoglobin, nitrogen-fixing root nodule-specific protein, and a soybean basic 7S globulin-like protein could be easily identified.     

Human placental fibronectin: demonstration of structural differences between the A and B chains in the extra domain-A region

Fibronectins are a class of cell adhesion proteins produced from a single gene. Soluble plasma fibronectin plays a role in wound healing and the insoluble cellular fibronectin form anchors cells to the substrata. The proteins possess multiple macromolecular binding domains including collagen, fibrin, and heparin. Alternative RNA splicing in at least three regions (ED-A, ED-B, and III CS) is responsible for this fibronectin polymorphism. We have been studying this polymorphism at the protein level in placental fibronectin, a poorly soluble form of cellular fibronectin. Cathepsin D-digested placental fibronectin applied to a heparin-agarose column and eluted with a NaCl stepwise gradient (0.1, 0.3, 0.5 M) gave two polypeptides (80-100 and 65 kDa) in the 0.3 M NaCl peak. Immunoblots with monoclonal antibodies IST-2 (specific for the carboxy-terminal heparin-binding domain) and IST-9 (specific for the ED-A portion of fibronectin) suggest that both peptides contain the carboxy-terminal heparin-binding (Hep-2) domain, but that only the larger fragment possesses the ED-A segment. The two peptides were separated using sodium dodecyl sulfate-polyacrylamide gel electrophoresis, electrotransferred to Polybrene-coated polyvinyl difluoride membranes, and characterized by microsequence analysis. This analysis confirmed that both fragments start with the same amino acid sequence, 17 amino acids before the start of ED-A. These results demonstrate that placental fibronectin is a heterodimer, structurally distinct from plasma fibronectin due to the presence of a unique domain modification that is not seen in the plasma form.     

Microsequence analysis of peptides and proteins : I. Preparation of samples by reverse-phase liquid chromatography

Reverse-phase supports for the separation of peptides and proteins are compared in two high-performance liquid chromatographic systems. One uses a trifluoroacetic acid-acetonitrile solvent system with a 206-nm detector, and the other uses pyridine-formate or pyridine-acetate and 1-propanol with a postcolumn fluorescence detector. Each system was examined with RP8, RP18, and alkylphenyl supports. In most applications, the trifluoroacetic acid-acetonitrile solvent system used in conjunction with an alkylphenyl column performed best. The use of this system for the preparation of low-microgram amounts of samples for microsequence analysis is illustrated.     

Microsequence analysis of peptides and proteins. VIII. Improved electroblotting of proteins onto membranes and derivatized glass-fiber sheets

We have quantitatively examined the various parameters affecting the electrotransfer and sequence analysis of proteins from sodium dodecyl sulfate (SDS) gels to derivatized glass fiber paper or to polyvinyldifluoride (PVDF) membranes. Transfer yields in the range of 90-95% can be obtained for proteins in the molecular weight range of 10-90 kDa for transfer from 12% SDS gels to glass fiber paper derivatized with either QAPS (N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride) or APS (aminopropyltriethoxysilane). In order to achieve these yields, it was necessary to modify the conditions described by R. Aebersold et al. (J. Biol. Chem. 261, 4229-4238, 1986). We activated the glass fiber paper with dilute ammonia water and derivatized the activated glass fiber paper with QAPS and APS in anhydrous solvents which were allowed to slowly absorb moisture during the derivatization process. The transfer yield varied with transfer time versus molecular weight of the protein for a given percentage gel. Shorter transfer times and higher yields were obtained for higher molecular weight proteins on 8% gels. Lower molecular weight protein gave higher yields from 12% gels under similar transfer conditions. Sequencing yields of the transferred proteins were in the range of 40-80%, but a number of background peaks were observed on HPLC analysis of the phenylthiohydantoin amino acid derivatives. Transfer yields in the range of 85-95% were observed for similar experiments with PVDF membranes. In order to achieve these yields, it was necessary to modify the conditions described by P. Matsudaira (J. Biol. Chem. 262, 10035-10038, 1987). A lower voltage and longer transfer times gave higher transfer yields. In order to achieve consistently high transfer yields, it was also necessary to precoat the PVDF membranes with Polybrene. The PVDF membranes were cut into approximately 1-mm-wide strips and inserted into a continuous flow reactor (J. E. Shively, P. Miller, and M. Ronk, Anal. Biochem. 163, 517-525, 1987) for sequence analysis. Overall yields of samples loaded onto gels, electrotransferred to Polybrene-coated PVDF membranes, and sequenced ranged from 50-60% for beta-lactoglobin (10-50 pmol loaded onto SDS gels) to 20-30% for bovine serum albumin and soybean trypsin inhibitor (50 pmol loaded onto SDS gels). A comparison of the two methods shows clear advantages for the PVDF membranes over the derivatized glass fiber paper, including the ability to directly sequence the Coomassie blue-stained PVDF membranes, and the lower backgrounds observed on subsequent sequence analysis.     

Automated carboxy-terminal sequence analysis of peptides and proteins using diphenyl phosphoroisothiocyanatidate.

Proteins and peptides can be sequenced from the carboxy-terminus with isothiocyanate reagents to produce amino acid thiohydantoin derivatives. Previous studies in our laboratory have focused on the automation of the thiocyanate chemistry using acetic anhydride and trimethylsilylisothiocyanate (TMS-ITC) to derivatize the C-terminal amino acid to a thiohydantoin and sodium trimethylsilanolate for specific hydrolysis of the derivatized C-terminal amino acid (Bailey, J.M., Shenoy, N.R., Ronk, M., & Shively, J.E., 1992, Protein Sci. 1, 68-80). A major limitation of this approach was the need to activate the C-terminus with acetic anhydride. We now describe the use of a new reagent, diphenyl phosphoroisothiocyanatidate (DPP-ITC) and pyridine, which combines the activation and derivatization steps to produce peptidylthiohydantoins. Previous work by Kenner et al. (Kenner, G.W., Khorana, H.G., & Stedman, R.J., 1953, Chem. Soc. J., 673-678) with this reagent demonstrated slow kinetics. Several days were required for complete reaction. We show here that the inclusion of pyridine was found to promote the formation of C-terminal thiohydantoins by DPP-ITC resulting in complete conversion of the C-terminal amino acid to a thiohydantoin in less than 1 h. Reagents such as imidazole, triazine, and tetrazole were also found to promote the reaction with DPP-ITC as effectively as pyridine. General base catalysts, such as triethylamine, do not promote the reaction, but are required to convert the C-terminal carboxylic acid to a salt prior to the reaction with DPP-ITC and pyridine. By introducing the DPP-ITC reagent and pyridine in separate steps in an automated sequencer, we observed improved sequencing yields for amino acids normally found difficult to derivatize with acetic anhydride/TMS-ITC. This was particularly true for aspartic acid, which now can be sequenced in yields comparable to most of the other amino acids. Automated programs are described for the C-terminal sequencing of peptides covalently attached to carboxylic acid-modified polyethylene and proteins (200 pmol to 5 nmol) noncovalently applied to Zitex (porous Teflon). The generality of our automated C-terminal sequencing methodology was examined by sequencing model peptides containing all 20 of the common amino acids. All of the amino acids tested were found to sequence in good yield except for proline, which was found not to be capable of derivatization. In spite of this limitation, the methodology should be a valuable tool for the C-terminal sequence analysis of peptides and proteins.(ABSTRACT TRUNCATED AT 400 WORDS)     

Manual precyclization of fiberglass filters for microsequence analysis of peptides and proteins

A manual procedure for precyclization of fiberglass filters has been described. The quality of the manually precycled filter is as good for microsequence analysis of proteins and peptides as a filter that has been precycled by an automatic system. The manually precycled filter is convenient to use and saves time and money.     

A high-recovery extraction procedure for quantitative analysis of substance P and opioid peptides in human cerebrospinal fluid

This study reports an improved approach for the determination of neuropeptide levels in human cerebrospinal fluid (CSF). The method is based on sample acidification followed by liquid-liquid extraction (LLE) combined with radioimmunoassay. It was applied to study the recovery and level of some opioid peptides (Met-enkephalin-Arg(6)-Phe(7) and Leu-enkephalin-Arg(6)), substance P and the substance P(1-7) fragment, which are all compounds known to be present in human CSF. The results indicated that the use of LLE highly improved the recovery of these peptides compared to current liquid-solid-phase extraction methods by using silica gel cartridges or mini-columns for ion-exchange chromatography. Peptides added to CSF in concentrations down to 10 fmol/ml were recovered in yields exceeding 80%. The mean recovery of synthetic peptides as recorded by radioimmunoassay in the LLE procedure was significantly improved when HCl was added to the sample. In contrast, when the (125)I-labeled analogues of the peptides were added to CSF samples, the mean recovery of the four labeled peptides using the LLE procedure was markedly reduced in acidified samples. We also found that the inclusion of HCl effectively improved the removal of proteins present in the samples. As an application the levels of substance P and Met-enkephalin-Arg(6)-Phe(7) in CSF samples from patients with chronic pain (fibromyalgia syndrome) were measured using the new procedure. It was possible to confirm a significant difference in the CSF levels of both peptides when comparing patients and controls.     

Determination of kinetic and retention properties of cartridge and disk devices for solid-phase extraction

The kinetic properties of cartridge and disk solid-phase extraction devices are determined by forced-flow liquid chromatography. Typical cartridges provide about 5–15 theoretical plates per cm of bed height and particle-loaded membranes provide about 4–9 theoretical plates for a 0.5-mm-thick membrane. It is shown that cartridge devices fail to provide their maximum trapping performance because of inadequate packing density and that the required packing density could be easily achieved in practice with particles of a standard size. The retention properties of common sorbents for extraction from water and air are characterized with the solvation parameter model. For predominantly aqueous solutions a favorable cavity term results in increased retention while polar interactions tend to reduce retention. Retention on porous polymer sorbents is more complicated because of their capacity to absorp significant amounts of the sample processing solvent resulting in solvent-dependent changes in retention properties. For trapping organic volatiles from air cavity formation and dispersion interactions are important, and in the case of Tenax its capacity for induction interactions is also significant.     

Utility of the gas-phase sequencer for both liquid- and solid-phase degradation of proteins and peptides at low picomole levels

The utility of the commercially available gas-phase sequencer for complete analysis of peptide samples was investigated. Using the program supplied with the instrument, significant extractive loss of samples in Polybrene was observed, even at input levels up to 500 pmol. In order to reduce this loss, the sequencer program was modified by increasing the phenylisothiocyanate (PITC)-coupling steps from two to three and lengthening the duration of ethyl acetate (S2) delivery while reducing the delivery rate. These changes gave improved results with peptides, e.g., all eight residues of angiotensin II were identified at the 25-pmol level. In addition, background contamination was decreased and repetitive yields were increased. The instrument was also found to function well with samples coupled to solid supports; however, some of the methodologies that work adequately for covalent attachment of peptides to solid supports at the level 1-10 nmol were found to give unacceptable coupling/sequenceable yields at or below the 100-pmol level. The coupling methods tried were (1) reaction of homoserine lactone with aminopropyl (AP)-glass, (2) reaction of alpha- and epsilon-NH2 groups with p-phenylenediisothiocyanate (DITC)-glass, and (3) reaction of alpha-COOH groups with aminoaryl (AA)-glass via EDAC (1-ethyl-3,3'-dimethylaminopropyl-carbodiimide). Of these, the first method gave combined yields of 42-94% while the latter two were only 9-35% efficient. The covalently bound samples provided sequence information even at the resulting low levels, e.g., 9/13 residues of dynorphin including Lys-13 at 11 pmol. In general, sequencer runs on solid-phase samples gave "cleaner" analyses and slightly higher repetitive yields (1-2%). Sequence information has also been obtained on peptides made by solid-phase synthesis prior to cleavage from the polystyrene support. With improved coupling efficiencies, solid-phase techniques would provide an alternative to immobilization of peptides in Polybrene films for low picomole level gas-phase sequencing.     

The N-terminal amino acid sequence of the beta-subunit of the legumin-like protein from seeds of Ginkgo biloba.

The sequence of the first 52 amino acids at the N-terminus of the beta-subunit of a legumin-like protein from seeds of the gymnosperm Ginkgo biloba were determined by automated sequencing and DABITC/PITC microsequence analyses of peptides derived from the protein by enzymatic digestions and chemical cleavage with CNBr. The protein from Ginkgo exhibits sequence homologies (32-49% identities) with the 11S globulins and legume-like proteins from seeds of various angiosperm monocotyledons and dicotyledons.     

High-throughput peptide mass mapping using a microdevice containing trypsin immobilized on a porous polymer monolith coupled to MALDI TOF and ESI TOF mass spectrometers

An enzymatic microreactor with a volume of 470 nL has been prepared by immobilizing trypsin on a 10 cm long reactive porous polymer monolith located in a 100 microm i.d. fused silica capillary. This reactor affords suitable degrees of digestion of proteins even after very short residence times of less than 1 min. The performance is demonstrated with the digestion of eight proteins ranging in molecular mass from 2848 to 77 754. The digests were analyzed using mass spectrometry in two modes: off-line MALDI and in-line nanoelectrospray ionization. The large numbers of identified peptides enable a high degree of sequence coverage and positive identification of the proteins. The extent of sequence coverage decreases as the molecular mass of the digested protein increases.     

Quantitative analysis of modified proteins by LC-MS/MS of peptides labeled with phenyl isocyanate

Stable isotope tagging methods have enabled relative quantitation of proteins between samples in LC-MS/MS analyses. However, most such methods are not applicable to the differential quantitation of modified proteins because the isotope tagging reagents only react with certain peptides or because the reagents incorporate a mass increment that is too small to allow reliable quantitation on low resolution ion trap MS instruments. Here, we describe the use of d0- and d5-phenyl isocyanate (PIC) as N-terminal reactive tags for essentially all peptides in proteolytic digests. PIC reacts quantitatively with peptide N-terminal amines within minutes at neutral pH and the PIC-labeled peptides undergo informative MS/MS fragmentation. Ratios of d0- and d5-PIC-labeled derivatives of several model peptides were linear across a 10000-fold range of peptide concentration ratios, thus indicating a wide dynamic range for quantitation. Application of PIC labeling enabled relative quantitation of several styrene oxide adducts of human hemoglobin in LC-MS/MS analyses. PIC labeling offers a versatile means of quantifying changes in modified or variant protein forms in paired samples.     

A novel magnetic silica support for use in chromatographic and enzymatic bioprocessing

A limited number of support matrices have so far been developed for use in magnetically stabilized fluidized bed (MSFB) applications. We have developed a versatile magnetic silica support which can be derivatized readily for both adsorption chromatography and enzyme immobilization by well-known techniques. A magnetic pellicular bead is prepared by electrostatically depositing alternating layers of colloidal silica and cationic polymer onto macroscopic nickel core particles. The polymer is then burned out and the silica partially sintered to yield a porous shell with 5-80 m(2)/g of surface area. This magnetic composite was tested as a support for immobilizing invertase. Sucrose was continuously converted to its component monosaccharides with nearly constant activity over the first 8 days and retention of 50% of initial activity after 25 days.     

Comparison of the amino acid sequences of the lectins from seeds of Dioclea lehmanni and Canavalia maritima.

The amino acid sequences of the major lectins from the seeds of Dioclea lehmanni and Canavalia maritima were determined by DABITC/PITC microsequence analysis of peptides derived from the proteins by enzymatic digestions with trypsin, chymotrypsin and the protease from S. aureus V8. These sequences were found to be very similar to those of the lectins from Dioclea grandiflora and Canavalia ensiformis (Con A). The D. lehmanni lectin was unusual amongst legume lectins in that it contained a single Cys.