A caldesmon peptide activates smooth muscle via a mechanism similar to ERK-mediated phosphorylation

Caldesmon (CaD) is thought to regulate smooth muscle contraction, because it binds actin and inhibits actomyosin interactions. A synthetic actin-binding peptide (GS17C) corresponding to Gly666-Ser682 of chicken gizzard CaD has been shown to induce force development in permeabilized smooth muscle cells. The mechanism of GS17C's action remains unclear, although a structural effect was postulated. By photo-crosslinking and fluorescence quenching experiments with a gizzard CaD fragment (H32K; Met563-Pro771) and its mutants, we showed that GS17C indeed dissociated the C-terminal region of H32K from actin, in a manner similar to extracellular signal-regulated kinase-mediated phosphorylation, thereby reversing the CaD-imposed inhibition and enabling the actomyosin interaction.     

Phosphorylation of caldesmon during smooth muscle contraction and cell migration or proliferation

Summary The actin-binding protein caldesmon (CaD) exists both in smooth muscle (the heavy isoform, h-CaD) and non-muscle cells (the light isoform, l-CaD). In smooth muscles h-CaD binds to myosin and actin simultaneously and modulates the actomyosin interaction. In non-muscle cells l-CaD binds to actin and stabilizes␣the actin stress fibers; it may also mediate the interaction between actin and non-muscle myosins. Both h- and l-CaD are phosphorylated in vivo upon stimulation. The major phosphorylation sites of h-CaD when activated by phorbol ester are the Erk-specific sites, modification of which is attenuated by the MEK inhibitor PD98059. The same sites in l-CaD are also phosphorylated when cells are stimulated to migrate, whereas in dividing cells l-CaD is phosphorylated more extensively, presumably by cdc2 kinase. Both Erk and cdc2 are members of the MAPK family. Thus it appears that CaD is a downstream effector of the Ras signaling pathways. Significantly, the phosphorylatable serine residues shared by both CaD isoforms are in the C-terminal region that also contains the actin-binding sites. Biochemical and structural studies indicated that phosphorylation of CaD at the Erk sites is accompanied by a conformational change that partially dissociates CaD from actin. Such a structural change in h-CaD exposes the myosin-binding sites on the actin surface and allows actomyosin interactions in smooth muscles. In the case of non-muscle cells, the change in l-CaD weakens the stability of the actin filament and facilitates its disassembly. Indeed, the level of l-CaD modification correlates very well in a reciprocal manner with the level of actin stress fibers. Since both cell migration and cell division require dynamic remodeling of actin cytoskeleton that leads to cell shape changes, phosphorylation of CaD may therefore serve as a plausible means to regulate these processes. Thus CaD not only links the smooth muscle contractility and non-muscle motility, but also provides a common mechanism for the regulation of cell migration and cell proliferation.     

Requirement of reversible caldesmon phosphorylation at P21-activated kinase-responsive sites for lamellipodia extensions during cell migration

Caldesmon is believed to be one of the key regulators for actin dynamics and thereby cell polarity, membrane extension, and cell motility. We have shown previously that stress fiber formation and cell movement are severely impaired in the cells expressing human fibroblast caldesmon fragment defective in Ca2+/CaM binding sites. Both Ser458 and Ser489, adjacent to the Ca2+/CaM-binding sites, are phosphorylated by p21-activated kinase (PAK) in vitro. Here we report that Ser458 is phosphorylated in response to cell movement. We substituted Ser458 and Ser489 on C-terminal caldesmon (CaD39) with alanine or glutamic acid to mimic under-phosphorylated (CaD39-PAKA) or constitutively phosphorylated (CaD39-PAKE) caldesmon. In vitro, CaD39-PAKE, but not CaD39-PAKA, fails to inhibit myosin ATPase activity and exhibits reduced binding to Ca2+/CaM. When stably expressed in Chinese Hamster Ovary cells, both CaD39-PAKA and CaD39-PAKE incorporate into stress fibers and localize to the leading edge of the migrating cell. Expression of CaD39-PAKE, but not CaD39-PAKA, fails to protect stress fibers from cytochalasin depolymerization. However, both mutations inhibit cell polarization and lead to defects in membrane extension and cell migration. We conclude that phosphorylation of caldesmon by PAK is a dynamic process required to regulate actin dynamics and membrane protrusions in wound-induced cell migration.     

Modulation of actin mechanics by caldesmon and tropomyosin

The ability of cells to sense and respond to physiological forces relies on the actin cytoskeleton, a dynamic structure that can directly convert forces into biochemical signals. Because of the association of muscle actin-binding proteins (ABPs) may affect F-actin and hence cytoskeleton mechanics, we investigated the effects of several ABPs on the mechanical properties of the actin filaments. The structural interactions between ABPs and helical actin filaments can vary between interstrand interactions that bridge azimuthally adjacent actin monomers between filament strands (i.e. by molecular stapling as proposed for caldesmon) or, intrastrand interactions that reinforce axially adjacent actin monomers along strands (i.e. as in the interaction of tropomyosin with actin). Here, we analyzed thermally driven fluctuations in actin's shape to measure the flexural rigidity of actin filaments with different ABPs bound. We show that the binding of phalloidin increases the persistence length of actin by 1.9-fold. Similarly, the intrastrand reinforcement by smooth and skeletal muscle tropomyosins increases the persistence length 1.5- and 2- fold respectively. We also show that the interstrand crosslinking by the C-terminal actin-binding fragment of caldesmon, H32K, increases persistence length by 1.6-fold. While still remaining bound to actin, phosphorylation of H32K by ERK abolishes the molecular staple (Foster et al. 2004. J Biol Chem 279;53387-53394) and reduces filament rigidity to that of actin with no ABPs bound. Lastly, we show that the effect of binding both smooth muscle tropomyosin and H32K is not additive. The combination of structural and mechanical studies on ABP-actin interactions will help provide information about the biophysical mechanism of force transduction in cells.     

Direct interaction between caldesmon and cortactin

Actin polymerization and depolymerization plays a central role in controlling a wide spectrum of cellular processes. There are many actin-binding proteins in eukaryotic cells. Their roles in the remodeling of the actin architecture and whether they work cooperatively await further study. Caldesmon (CaD) is an actin-binding protein present in nearly all mammalian cells. Cortactin is another actin-binding protein found mainly in the cell cortex. There have been no reports suggesting that CaD and cortactin interact with each other or work as partners. Here, we present evidence that CaD binds cortactin directly by overlay, pull-down assays, ELISA, and by column chromatography. The interaction involves the N-terminal region of cortactin and the C-terminal region of CaD, and appears to be enhanced by divalent metal ions. Cortactin competes with both full-length CaD and its C-terminal fragment for actin binding. Binding of cortactin partially alleviates the inhibitory effect of CaD on the actomyosin ATPase activity. Not only can binding be demonstrated in vitro, the two proteins also co-localize in activated cells at the cortex. Whether such interactions bear any functional significance awaits further investigation.     

Calcium-Activated Proteolysis of Neurofilament Proteins in the Squid Giant Neuron

The phosphorylation and proteolysis of squid neurofilament proteins by endogenous kinase and calcium-activated protease activities, respectively, were studied. When axoplasm was incubated in the presence of [gamma-32P]ATP, most of the phosphate was incorporated into two neurofilament proteins: a 220-kilodalton (NF-220) and a high-molecular-weight (HMW) protein. When this phosphorylated axoplasm was subjected to endogenous calcium-activated proteolysis, two significant phosphorylated fragments were generated, i.e., a soluble 110K fragment and a pelletable 100K fragment. Immunochemical and other analyses suggest that the pelletable 100K fragment contains the common helical neurofilament rod region and that the soluble 110K protein is the putative side arm of the NF-220. In contrast, neither the HMW or the NF-220 was detected in the region of the stellate ganglion which contains the cell bodies of the giant axon. However, this region did contain a number of proteins that were sensitive to calcium-activated proteolysis and reacted with a monoclonal intermediate filament antibody. This intermediate filament antibody reacts with most of the axoplasmic proteins that copurify with neurofilaments, i.e., in the order of their intermediate filament antibody staining intensity, a 60K, 65K, 220K, and 74K protein. In the cell body preparation, the intermediate filament antibody labeled, in order of their staining intensity, a 65K, 60K, 74K, and 180K protein. In both the axoplasmic and cell body preparations, endogenous calcium-activated proteolysis generated characteristic fragments that could be labeled with the anti-intermediate filament antibody.     

Localization of two phosphorylation sites adjacent to a region important for polymerization on the tail of Dictyostelium myosin

Phosphorylation of the myosin heavy chains of Dictyostelium discoideum is known to be inhibited following chemotactic stimulation of the cells. Effects of dephosphorylation on the assembly of myosin and on its actin-activated ATPase activity raised the question of where the phosphorylated sites are located with respect to sites responsible for polymerization and actin binding. Using seven monoclonal antibodies the binding sites of which were mapped in the electron microscope, two phosphorylation sites, i.e., threonine residues that were phosphorylated by a kinase from D. discoideum, were localized by immunoblotting of chymotryptic fragments. Two of the antibodies bound to the terminal one fifth of the tail and recognized a phosphorylated chymotryptic fragment of 38 kd. The non-phosphorylated form and single and double phosphorylated forms of this fragment were separated by two-dimensional electrophoresis. Antibody labeling of lower mol. wt. polypeptides indicated that both phosphorylation sites were located at least 32 kd from the end of the tail. A non-phosphorylated fragment, that was insoluble at low ionic strength due to polymerization, proved to be an internal cleavage product of the tail. A segment of this fragment necessary for polymerization was mapped adjacent to the phosphorylation sites.     

Thoracic Aortic Aneurysm (TAAD)-causing Mutation in Actin Affects Formin Regulation of Polymerization

More than 30 mutations in ACTA2, which encodes α-smooth muscle actin, have been identified to cause autosomal dominant thoracic aortic aneurysm and dissection. The mutation R256H is of particular interest because it also causes patent ductus arteriosus and moyamoya disease. R256H is one of the more prevalent mutations and, based on its molecular location near the strand-strand interface in the actin filament, may affect F-actin stability. To understand the molecular ramifications of the R256H mutation, we generated Saccharomyces cerevisiae yeast cells expressing only R256H yeast actin as a model system. These cells displayed abnormal cytoskeletal morphology and increased sensitivity to latrunculin A. After cable disassembly induced by transient exposure to latrunculin A, mutant cells were delayed in reestablishing the actin cytoskeleton. In vitro, mutant actin exhibited a higher than normal critical concentration and a delayed nucleation. Consequently, we investigated regulation of mutant actin by formin, a potent facilitator of nucleation and a protein needed for normal vascular smooth muscle cell development. Mutant actin polymerization was inhibited by the FH1-FH2 fragment of the yeast formin, Bni1. This fragment strongly capped the filament rather than facilitating polymerization. Interestingly, phalloidin or the presence of wild type actin reversed the strong capping behavior of Bni1. Together, the data suggest that the R256H actin mutation alters filament conformation resulting in filament instability and misregulation by formin. These biochemical effects may contribute to abnormal histology identified in diseased arterial samples from affected patients.     

Caldesmon binding to actin is regulated by calmodulin and phosphorylation via different mechanisms

Smooth muscle caldesmon (CaD) binds F-actin and inhibits actomyosin ATPase activity. The inhibition is reversed by Ca2+/calmodulin (CaM). CaD is also phosphorylated upon stimulation at sites specific for mitogen-activated protein kinases (MAPKs). Because of these properties, CaD is thought to be involved in the regulation of smooth muscle contraction. The molecular mechanism of the reversal of inhibition is not well understood. We have expressed His6-tagged fragments containing the sequence of the C-terminal region of human (from M563 to V793) and chicken (from M563 to P771) CaD as well as a variant of the chicken isoform with a Q766C point mutation. By cleavages with proteases, followed by high-speed cosedimentation with F-actin and mass spectrometry, we found that within the C-terminal region of CaD there are multiple actin contact points forming two clusters. Intramolecular fluorescence resonance energy transfer between probes attached to cysteine residues (the endogenous C595 and the engineered C766) located in these two clusters revealed that the C-terminal region of CaD is elongated, but it becomes more compact when bound to actin. Binding of CaM restores the elongated conformation and facilitates dissociation of the C-terminal CaD fragment from F-actin. When the CaD fragment was phosphorylated with a MAPK, only one of the two actin-binding clusters dissociated from F-actin, whereas the other remained bound. Taken together, these results demonstrate that while both Ca2+/CaM and MAPK phosphorylation govern CaD's function via a conformational change, the regulatory mechanisms are different.     

Importance of a Lys113–Glu195 Intermonomer Ionic Bond in F-actin Stabilization and Regulation by Yeast Formins Bni1p and Bnr1p

Proper actin cytoskeletal function requires actin''s ability to generate a stable filament and requires that this reaction be regulated by actin-binding proteins via allosteric effects on the actin. A proposed ionic interaction in the actin filament interior between Lys¹¹³ of one monomer and Glu¹⁹⁵ of a monomer in the apposing strand potentially fosters cross-strand stabilization and allosteric communication between the filament interior and exterior. We interrupted the potential interaction by creating either K113E or E195K actin. By combining the two, we also reversed the interaction with a K113E/E195K (E/K) mutant. In all cases, we isolated viable cells expressing only the mutant actin. Either single mutant cell displays significantly decreased growth in YPD medium. This deficit is rescued in the double mutant. All three mutants display abnormal phalloidin cytoskeletal staining. K113E actin exhibits a critical concentration of polymerization 4 times higher than WT actin, nucleates more poorly, and forms shorter filaments. Restoration of the ionic bond, E/K, eliminates most of these problems. E195K actin behaves much more like WT actin, indicating accommodation of the neighboring lysines. Both Bni1 and Bnr1 formin FH1-FH2 fragment accelerate polymerization of WT, E/K, and to a lesser extent E195K actin. Bni1p FH1-FH2 dramatically inhibits K113E actin polymerization, consistent with barbed end capping. However, Bnr1p FH1-FH2 restores K113E actin polymerization, forming single filaments. In summary, the proposed ionic interaction plays an important role in filament stabilization and in the propagation of allosteric changes affecting formin regulation in an isoform-specific fashion.     

Dynamics of human keratin 18 phosphorylation: polarized distribution of phosphorylated keratins in simple epithelial tissues

Phosphorylation of keratin polypeptides 8 and 18 (K8/18) and other intermediate filament proteins results in their reorganization in vitro and in vivo. In order to study functional aspects of human K18 phosphorylation, we generated and purified a polyclonal antibody (termed 3055) that specifically recognizes a major phosphorylation site (ser52) of human K18 but not dephosphorylated K18 or a ser52-->ala K18 mutant. Pulse-chase experiments followed by immunoprecipitation and peptide mapping of in vivo 32PO4-labeled K8/18 indicated that the overall phosphorylation turnover rate is faster for K18 versus K8, and that ser52 of K18 is a highly dynamic phosphorylation site. Isoelectric focusing of 32PO4 labeled K18 followed by immunoblotting with 3055 showed that the major phosphorylated K18 species contain ser52 phosphorylation but that some K18 molecules exist that are preferentially phosphorylated on K18 sites other than ser52. Immunoblotting of total cell lysates obtained from cells at different stages of the cell cycle showed that ser52 phosphorylation increases three to fourfold during the S and G2/M phases of the cell cycle. Immunofluorescence staining of cells at different stages of mitosis, using 3055 or other antibodies that recognize the total keratin pool, resulted in preferential binding of the 3055 antibody to the reorganized keratin fraction. Staining of human tissues or tissues from transgenic mice that express human K18 showed that the phospho-ser52 K18 species are located preferentially in the basolateral and apical domains in the liver and pancreas, respectively, but no preferential localization was noted in other simple epithelial organs examined. Our results support a model whereby phosphorylated intermediate filaments are localized in specific cellular domains depending on the tissue type and site(s) of phosphorylation. In addition, ser52 of human K18 is a highly dynamic phosphorylation site that undergoes modulation during the S and G2/M phases of the cell cycle in association with filament reorganization.     

An intermediate form of ADP-F-actin

With yeast actin, contrary to other actins, filament formation, ATP hydrolysis, and Pi release are concurrent at low actin concentrations, the condition usually employed to assess actin polymerization. This observation leads to a question concerning the conformation of the filament barbed end that might be recognized by specific actin-binding proteins. To try to detect possible new actin polymer conformations that might be intermediate in the pathway leading to mature F-actin, we monitored the change in intrinsic tryptophan fluorescence of yeast and muscle actins polymerized at pH 6 to accelerate the rate of filament formation. This allowed temporal resolution of the Pi release process from the slower process of polymerization. With both actins, we detected a biphasic instead of the usual monophasic fluorescence change, a rapid decrease that tracks with filament formation followed by a slower rebound (the second phase). This second phase postpolymerization conformational change requires Pi release and occurs nearly coincident with its release. The addition of Pi causes this second phase response to disappear, and the inclusion of Pi during polymerization prevents its appearance. At pH 7.5, with higher yeast actin concentrations to accelerate polymerization, a two-phase fluorescence change is also observed. In this case, the second phase change lags substantially behind Pi release. Pi release could also be resolved from polymer formation. V159N yeast actin, hypothesized previously as remaining in a postpolymerization ATP-like state, exhibits the same two-phase intrinsic tryptophan fluorescence behavior as wild-type yeast actin. Together, these observations demonstrate the presence of an intermediate filament state between ADP-Pi and mature ADP-F-actin.     

New Aspects of the Spontaneous Polymerization of Actin in the Presence of Salts

The mechanism of salt-induced actin polymerization involves the energetically unfavorable nucleation step, followed by filament elongation by the addition of monomers. The use of a bifunctional cross-linker, N,N′-(1,4-phenylene)dimaleimide, revealed rapid formation of the so-called lower dimers (LD) in which actin monomers are arranged in an antiparallel fashion. The filament elongation phase is characterized by a gradual LD decay and an increase in the yield of “upper dimers” (UD) characteristic of F-actin. Here we have used 90° light scattering, electron microscopy, and N,N′-(1,4-phenylene)dimaleimide cross-linking to reinvestigate relationships between changes in filament morphology, LD decay, and increase in the yield of UD during filament growth in a wide range of conditions influencing the rate of the nucleation reaction. The results show irregularity and instability of filaments at early stages of polymerization under all conditions used, and suggest that an earlier documented coassembling of LD with monomeric actin contributes to the initial disordering of the filaments rather than to the nucleation of polymerization. The effects of the type of G-actin-bound divalent cation (Ca²⁺/Mg²⁺), nucleotide (ATP/ADP), and polymerizing salt on the relation between changes in filament morphology and progress in G-actin-to-F-actin transformation show that ligand-dependent alterations in G-actin conformation determine not only the nucleation rate but also the kinetics of ordering of the filament structure in the elongation phase. The time courses of changes in the yield of UD suggest that filament maturation involves cooperative propagation of “proper” interprotomer contacts. Acceleration of this process by the initially bound MgATP supports the view that the filament-destabilizing conformational changes triggered by ATP hydrolysis and P_i liberation during polymerization are constrained by the intermolecular contacts established between MgATP monomers prior to ATP hydrolysis. An important role of contacts involving the DNase-I-binding loop and the C-terminus of actin is proposed.     

Plectin deposition at podosome rings requires myosin contractility

Metalloproteinase-dependent tissue invasion requires the formation of podosomes and invadopodia for localized matrix degradation. Actin cytoskeleton remodeling via Arp2/3-mediated actin polymerization is essential for podosome formation, and dynamic microtubules have an important role in maintaining podosome turnover in macrophages and osteoclasts. Little is known, however, about the involvement of the intermediate filament cytoskeleton in formation, stabilization, and turnover of podosomes. Here we show that vimentin intermediate filaments colocalize with the early sites of podosome formation at the stress fiber - focal adhesion interface in cultured vascular smooth muscle cells, but do not directly contribute to podosome formation, or stabilization. In unstimulated A7r5 cells the cytolinker protein plectin poorly colocalized with vimentin and the microdomains, but following induction by phorbol ester accumulated in the rings that surround the podosomes. In plectin-deficient A7r5 cells actin stress fiber remodelling is reduced in response to PDBu, and small podosomes remain localized at stable actin stress fibres. Pharmacological inhibition of actomyosin contractility by blebbistatin leads to an aberrant localization of podosomes away from the cell periphery and induces failure of plectin to surround the outer perimeter of these invasive adhesions. Taken together, we conclude that plectin is involved in growth and maturation of podosomes by reducing focal adhesion and stress fiber turnover, and that actomyosin-dependent contractility is required for the peripheral localization and specific deposition of plectin at the podosome rings.     

Nucleated polymerization of actin from the membrane-associated ends of microvillar filaments in the intestinal brush border

We examined the nucleated polymerization of actin from the two ends of filaments that comprise the microvillus (MV) core in intestinal epithelial cells by electron microscopy. Three different in vitro preparations were used to nucleate the polymerization of muscle G- actin: (a) MV core fragments containing "barbed" and "pointed" filament ends exposed by shear during isolation, (b) isolated, membrane-intact brush borders, and (c) brush borders demembranated with Triton-X 100. It has been demonstrated that MV core fragments nucleate filament growth from both ends with a strong bias for one end. Here we identify the barbed end of the core fragment as the fast growing end by decoration with myosin subfragment one. Both cytochalasin B (CB) and Acanthamoeba capping protein block filament growth from the barbed but not the pointed end of MV core fragments. To examine actin assembly from the naturally occurring, membrane-associated ends of MV core filaments, isolated membrane-intact brush borders were used to nucleate the polymerization of G-actin. Addition of salt (75 mM KCl, 1 mM MgSO4) to brush borders preincubated briefly at low ionic strength with G- actin induced the formation of 0.2-0.4 micron "growth zones" at the tips of microvilli. The dense plaque at the tip of the MV core remains associated with the membrane and the presumed growing ends of the filaments. We also observed filament growth from the pointed ends of core filaments in the terminal web. We did not observe filament growth at the membrane-associated ends of core filaments when the latter were in the presence of 2 microM CB or if the low ionic strength incubation step was omitted. Addition of G-actin to demembranated brush borders, which retain the dense plaque on their MV tips, resulted in filament growth from both ends of the MV core. Again, 2 microM CB blocked filament growth from only the barbed (tip) end of the core. The dense plaque remained associated with the tip-end of the core in the presence of CB but usually was dislodged in control preparations where nucleated polymerization from the tip-end of the core occurred. Our results support the notion that microvillar assembly and changes in microvillar length could occur by actin monomer addition/loss at the barbed, membrane-associated ends of MV core filaments.     

Phosphorylation of Caldesmon by PFTAIRE1 kinase promotes actin binding and formation of stress fibers

Caldesmon (CaD) is an actin-binding protein that is capable of stabilizing actin filaments. Phosphorylation of CaD is widely accepted in the actin cytoskeletal modeling and promotion of cell migration. In this study, we show that CaD is a downstream phosphorylation substrate of PFTK1, a novel Cdc-2-related ser/thr protein kinase. Our study stemmed from an earlier investigation where we demonstrated that PFTK1 kinase conferred cell migratory advantages in human hepatocellular carcinoma (HCC) cells. Here, we showed that PFTK1-knockdown cells exhibited much reduced CaD phosphorylation and consequently caused dissociation of CaD from the F-actin fibers. The cellular localization of CaD was also altered in the absence of PFTK1. Immunofluorescence analysis revealed that PFTK1-abrogated cells exhibited a diffused and blurred appearance of CaD localization, whereas intact co-localization with F-actins was apparent in PFTK1-expressing cells. Without the binding of CaD to actin, disappearance of actin stress fibers was also evident in PFTK1-abrogated cells. In addition, we found that CaD is also commonly up-regulated in HCC tumors when compared to adjacent non-malignant liver (P = 0.022). Taken together, our results highlight a novel biological cascade that involved the phosphorylation activation of CaD by PFTK1 kinase in promoting formation of actin stress fibers.     

Isolation and biochemical characterization of ten-nanometer filaments from cultured ovarian granulosa cells

Ten-nm filaments have been isolated from control and colchicine-treated primary cultures of rat ovarian granulosa cells. Negative stain electron microscopy indicates an average filament diameter of 10.3 nm in the isolated fiber bundles, which, upon sodium dodecyl sulfate polyacrylamide gel electrophoresis, are found to contain a major polypeptide with a molecular weight of 57,000 and several minor components including actin. One-dimensional peptide mapping and two-dimensional gel electrophoresis demonstrate similarity between the granulosa cell and baby hamster kidney cell 10-nm filament subunit protein, both of which are distinguishable from keratin, desmin, actin, and tubulin. Quantitative gel densitometry experiments demonstrate little difference in the total amount of the 10-nm filament protein in control cells or cells treated with colchicine, accounting for 12 or 15% of the total cellular protein, respectively. The purification procedure, which involves extraction in Triton X-100 and KCl followed by DNase I treatment, yields 709% of the total granulosa cell intermediate filament protein, and 70% of the newly synthesized 57,000 molecular weight component. Two-dimensional gel electrophoresis of cultures labeled with [32P]phosphate show by autoradiography that the 57,000-dalton polypeptide, actin, and a 130,000-dalton protein are the most readily phosphorylated polypeptides in granulosa cell cultures. These studies identify the major intermediate filament subunit protein of granulosa cells as a 57,000-dalton phosphorylatable polypeptide which comprises a substantial portion of the granulosa cell cytoskeleton.     

Cyclic AMP-dependent protein kinase-induced vimentin filament disassembly involves modification of the N-terminal domain of intermediate filament subunits

The intermediate filament protein vimentin was phosphorylated with cAMP-dependent protein kinase under conditions that induce filament disassembly. Digestion of phosphorylated vimentin with lysine-specific endoprotease and subsequent tryptic peptide mapping indicated that a 12 kDa N-terminal fragment contained all the phosphorylation sites found in the intact molecule. Analysis of cyanogen bromide digests indicated that two phosphorylated peptides were produced, with the major 32P-labeled species representing amino acid position 14-72, and a minor 32P-labeled peptide representing amino acid positions 1-13. These results demonstrate that phosphorylation of sites within the N-terminal head domain of vimentin are associated with phosphorylation induced filament disassembly.     

Capping Protein Terminates but Does Not Initiate Chemoattractant-induced Actin Assembly in Dictyostelium

The first step in the directed movement of cells toward a chemotactic source involves the extension of pseudopods initiated by the focal nucleation and polymerization of actin at the leading edge of the cell. We have previously isolated a chemoattractant-regulated barbed-end capping activity from Dictyostelium that is uniquely associated with capping protein, also known as cap32/34. Although uncapping of barbed ends by capping protein has been proposed as a mechanism for the generation of free barbed ends after stimulation, in vitro and in situ analysis of the association of capping protein with the actin cytoskeleton after stimulation reveals that capping protein enters, but does not exit, the cytoskeleton during the initiation of actin polymerization. Increased association of capping protein with regions of the cell containing free barbed ends as visualized by exogenous rhodamine-labeled G-actin is also observed after stimulation. An approximate threefold increase in the number of filaments with free barbed ends is accompanied by increases in absolute filament number, whereas the average filament length remains constant. Therefore, a mechanism in which preexisting filaments are uncapped by capping protein, in response to stimulation leading to the generation of free barbed ends and filament elongation, is not supported. A model for actin assembly after stimulation, whereby free barbed ends are generated by either filament severing or de novo nucleation is proposed. In this model, exposure of free barbed ends results in actin assembly, followed by entry of free capping protein into the actin cytoskeleton, which acts to terminate, not initiate, the actin polymerization transient.     

Yeast actin with a mutation in the "hydrophobic plug" between subdomains 3 and 4 (L266D) displays a cold-sensitive polymerization defect

Holmes et al. (Holmes, K. C., D. Popp, W. Gebhard, and W. Kabsch. 1990. Nature [Lond.] 347: 44-49) hypothesized that between subdomains 3 and 4 of actin is a loop of 10 amino acids including a four residue hydrophobic plug that inserts into a hydrophobic pocket formed by two adjacent monomers on the opposing strand thereby stabilizing the F- actin helix. To test this hypothesis we created a mutant yeast actin (L266D) by substituting Asp for Leu266 in the plug to disrupt this postulated hydrophobic interaction. Haploid cells expressing only this mutant actin were viable with no obvious altered phenotype at temperatures above 20 degrees C but were moderately cold-sensitive for growth compared with wild-type cells. The critical concentration for polymerization increased 10-fold at 4 degrees C compared with wild-type actin. The length of the nucleation phase of polymerization increased as the temperature decreased. At 4 degrees C nucleation was barely detectable. Addition of phalloidin-stabilized F-actin nuclei and phalloidin restored L266D actin''s ability to polymerize at 4 degrees C. This mutation also affects the overall rate of elongation during polymerization. Small effects of the mutation were observed on the exchange rate of ATP from G-actin, the G-actin intrinsic ATPase activity, and the activation of myosin S1 ATPase activity. Circular dichroism measurements showed a 15 degrees C decrease in melting temperature for the mutant actin from 57 degrees C to 42 degrees C. Our results are consistent with the model of Holmes et al. (Holmes, K. C., D. Popp, W. Gebhard, and W. Kabsch. 1990. Nature [Lond.]. 347:44-49) involving the role of the hydrophobic plug in actin filament stabilization.