Magnetic nanoparticles supported ionic liquids for lipase immobilization: Enzyme activity in catalyzing esterification

Candida rugosa lipase was immobilized on magnetic nanoparticles supported ionic liquids having different cation chain length (C₁, C₄ and C₈) and anions (Cl⁻, BF₄⁻ and PF₆⁻). Magnetic nanoparticles supported ionic liquids were obtained by covalent bonding of ionic liquids–silane on magnetic silica nanoparticles. The particles are superparamagnetic with diameter of about 55 nm. Large amount of lipase (63.89 mg/(100 mg carrier)) was loaded on the support through ionic adsorption. Activity of the immobilized lipase was examined by the catalysis of esterification between oleic acid and butanol. The activity of bound lipase was 118.3% compared to that of the native lipase. Immobilized lipase maintained 60% of its initial activity even when the temperature was up to 80 °C. In addition, immobilized lipase retained 60% of its initial activity after 8 repeated batches reaction, while no activity was detected after 6 cycles for the free enzyme.     

Efficient production of diltiazem chiral intermediate using immobilized lipase from <Emphasis Type="Italic">Serratia marcescens</Emphasis>

The lipase from Serratia marcescence ECU1010 (Sml) was capable of enantioselectively catalyzing the synthesis of many chiral drug precursors. This paper investigated the immobilization of Sml on appropriate supporting materials and its performance in bioreactor. Chitosan, Celite 545, and DEAE-cellulose were found to be the ideal supports among 8 carriers tested with respect to enzyme load and activity recovery of lipase. When Sml was immobilized, significant improvements of stability against pH, thermal, and operational deactivation were observed with all the 3 better supports, and the best stability was observed when the lipase was immobilized on glutaraldehyde activated chitosan. As for the effect of organic solvent in the biphasic reaction system, the hydrolytic activity of the immobilized lipase on trans-3-(4′-methoxyphenyl)glycidic acid methyl ester ((±)-MPGM) observed in isopropyl ether was 6 and 3 times higher than those in toluene and methyl tert-butyl ether. The lipasecatalyzed production of (−)-MPGM by enzymatic resolution of (±)-MPGM with chitosan-Sml in isopropyl etherwater biphasic system was carried out in a 2 L stirred-tank reactor. The batch operation was more efficient operation mode for the enantioselective hydrolysis of (±)-MPGM, affording enantiopure (−)-MPGM in 44.3% overall yield, in contrast to 29.3% in a continuous reactor.     

Purification and characterization of the lipase from Serratia marcescens Sr41 8000 responsible for asymmetric hydrolysis of 3-phenylglycidic acid esters

A new lipase which enantioselectively hydrolyzes (±)-trans-3-(4-methoxyphenyl)glycidic acid methyl ester [(±)-MPGM], a key intermediate in the synthesis of diltiazem hydrochloride, was purified from the culture supernatant of Serratia marcescens Sr41 8000. The apparent kinetic constants (K_m, V_max) for hydrolysis of (2S,3R)-MPGM [(+)-MPGM] were 350 mM and 1.7 × 10⁻³ mol/min/mg protein in a toluene-water (1:1) emulsion system. The lipase did not attack (2R,3S)-MPGM [(−)-MPGM], and (−)-MPGM acted as a competitive inhibitor. The molecular mass was estimated to be 62,000 ± 2,000 from SDS-PAGE. The lipase preferentially hydrolyzed (2S,3R)-3-phenylglycidic acid esters, but did not hydrolyze cinnamic acid esters. The lipase released glycerol and fatty acid from olive oil, and the optimum pH and temperature for hydrolysis of olive oil were pH 8 and 45°C, respectively. The lipase was inhibited by Co²⁺, Ni²⁺, Fe²⁺, Fe³⁺ and EDTA, and activated by Ca²⁺, Li⁺ and SDS. It was presumed that the lipase was a metalloenzyme containing approximately one gram atom of calcium per molecular mass of 62,000. The lipase selectively hydrolyzed the 1,3 ester of triglycerides. Sequencing of the N-terminal amino acids revealed that this lipase was distinct from other known lipases.     

Enzymatic synthesis of palm-based ascorbyl esters

The synthesis of palm-based ascorbyl esters through transesterification of ascorbic acid and palm oil in tert-amyl alcohol catalyzed by immobilized lipase is described. Highest conversion (70–75%) was determined after 16 h reaction at 40 °C using lipase (Novozyme 435 from Candida antartica) with an ascorbic acid to palm oil mole ratio of 1:8. The purified product was further characterized by ¹³C NMR and GC–MS and the mixture of ascorbyl monoesters obtained were identified as ascorbyl monooleate (61%), ascorbyl monopalmitate (30%) and ascorbyl monostearate (9%). The antioxidant activity of palm-based ascorbyl esters was evaluated by 1,1-diphenyl-2-picrylhydrazyl (DPPH) test. The results showed that pure palm-based ascorbyl esters have an antioxidant activity with an IC₅₀ value of 0.1 mg/mL.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Immobilization of Candida rugosa lipase on sporopollenin from Lycopodium clavatum

Sporopollenin is a natural polymer obtained from Lycopodium clavatum, which is highly stable with constant chemical structure and has high resistant capacity to chemical attack. In this study, immobilization of lipase from Candida rugosa (CRL) on sporopollenin by adsorption method is reported for the first time. Besides this, the enzyme adsorption capacity, activity and thermal stability of immobilized enzyme have also been investigated. It has been observed that under the optimum conditions (Spo-E_(0.3)), the specific activity of the immobilized lipase on the sporopollenin by adsorption was 16.3 U/mg protein, which is 0.46 times less than that of the free lipase (35.6 U/mg protein). The pH and temperature of immobilized enzyme were optimized, which were 6.0 and 40 °C respectively. Kinetic parameters V_max and K_m were also determined for the immobilized lipase. It was observed that there is an increase of the K_m value (7.54 mM) and a decrease of the V_max value (145.0 U/mg-protein) comparing with that of the free lipase.     

Kinetic analyses for bindings of concanavalin A to dispersed and condensed mannose surfaces on a quartz crystal microbalance

A biotinylated mannotriose (Man3-bio) was dispersively immobilized in the matrix of biotinylated lactose (Gal-Glc-bio) on a streptavidin-covered, 27-MHz quartz crystal microbalance (QCM), and binding kinetics of concanavalin A (Con A) to Man3-bio in the Gal-Glc-bio matrix could be obtained from frequency decreases (mass increases) of the QCM. Association constants (K_a) and binding and dissociation rate constants (k_on and k_off) could be determined separately as the 1:1 and 1:2 bindings of Con A to Man3-bio on the surface. When Man3-bio was immobilized with content of 1 to 5 mol% in the matrix, the 1:1 binding of Con A to Man3-bio was obtained as K_a = (4 ± 1) × 10⁶ M⁻¹, k_on = (4 ± 1) × 10⁴ M⁻¹ s⁻¹, and k_off = (12 ± 2) × 10^–3 s⁻¹. On the contrary, when Man3-bio was immobilized with content of 20 to 100 mol% in the matrix, the 1:2 binding of Con A to Man3-bio was obtained as K_a = (14 ± 2) × 10⁶ M⁻¹, k_on = (14 ± 2) × 10⁴ M⁻¹ s⁻¹, and k_off = (7 ± 2) × 10^–3 s⁻¹. Thus, K_a for the 1:2 binding was 10 times larger than that for the 1:1 binding, with a three times larger binding rate constant (k_on) and a three times smaller dissociation rate constant (k_off). This is the first example to obtain separate kinetic parameters for the 1:1 and 1:2 bindings of lectins to carbohydrates on the surface.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Characterization of a extreme thermostable fructose-1,6-bisphosphate aldolase from hyperthermophilic bacterium Aquifex aeolicus

Fructose-1,6-bisphosphate (FBP) aldolase, is a glycolytic enzyme that catalyzes the reversible condensation reaction of FBP to dihydroxyacetone phosphate (DHAP) and glyceraldehyde-3-phosphate (G3P). The aldolase gene from Aquifex aeolicus was subcloned, overexpressed in E. coli and purified to 95% homogeneity. The purified enzyme was activated by high concentrations of NH₄⁺ and low concentrations of Co²⁺. The native molecular weight of the purified FBP aldolase was identified as 67 kDa (dimer) by gel filtration chromatography. The enzyme exhibits optimum pH at 6.5 and temperature at 90 °C. Based on the kinetic characterizations, the apparent K_m was calculated to be 4.4 ± 0.07 mM, while V_max was found to be 100 ± 0.02 μM min⁻¹ mg protein⁻¹. The recombinant protein showed extreme heat stability; no activity loss was observed even at 100 °C for 2 h. In addition, the thermophilic enzyme also showed higher stability against several organic solvents viz. acetonitrile, 1,4-dioxane, and methanol. With higher stability against both heat and organic solvents than any other class II aldolase, the A. aeolicus FBP aldolase is an attractive enzyme for use as a biocatalyst for industrial applications.     

Response surface design for the optimization of enzymatic detection of mercury in aqueous solution using immobilized urease from vegetable waste

Soluble and alginate immobilized urease was utilized for detection and quantitation of mercury in aqueous samples. Urease from the seeds of pumpkin, being a vegetable waste, was extracted and purified to apparent homogeneity (sp. activity 353 U/mg protein; A₂₈₀/A₂₆₀ = 1.12) by heat treatment at 48 ± 0.1 °C and gel filtration through Sephadex G-200. Homogeneous enzyme preparation was immobilized in 3.5% alginate leading to 86% immobilization, no leaching of enzyme was found over a period of 15 days at 4 °C. Urease catalyzed urea hydrolysis by soluble and immobilized enzyme revealed a clear dependence on the concentration of Hg²⁺. Inhibition caused by Hg²⁺ was non-competitive (K_i = 1.2 × 10⁻¹ μM for soluble and 1.46 × 10⁻¹ μM for alginate immobilized urease.). Time-dependent inhibition both in presence and in absence of Hg²⁺ ion revealed a biphasic inhibition in activity. For optimization of this process response surface methodology (RSM) was utilized where two-level-two-full factorial (2²) central composite design (CCD) has been employed. The regression equation and analysis of variance (ANOVA) were obtained using MINITAB^® 15 software. Predicted values thus obtained were closed to experimental value indicating suitability of the model. 3D response surface plot, iso-response contour plot and process optimization curve were helpful to predict the results by performing only limited set of experiments.     

Covalent immobilization of β-1,4-glucosidase from <Emphasis Type="Italic">Agaricus arvensis</Emphasis> onto functionalized silicon oxide nanoparticles

An efficient β-1,4-glucosidase (BGL) secreting strain, Agaricus arvensis, was isolated and identified. The relative molecular weight of the purified A. arvensis BGL was 98 kDa, as determined by sodium dodecylsulfate polyacrylamide gel electrophoresis, or 780 kDa by size exclusion chromatography, indicating that the enzyme is an octamer. Using a crude enzyme preparation, A. arvensis BGL was covalently immobilized onto functionalized silicon oxide nanoparticles with an immobilization efficiency of 158%. The apparent V _max (k _cat) values of free and immobilized BGL under standard assay conditions were 3,028 U mg protein⁻¹ (4,945 s⁻¹) and 3,347 U mg protein⁻¹ (5,466 s⁻¹), respectively. The immobilized BGL showed a higher optimum temperature and improved thermostability as compared to the free enzyme. The half-life at 65 °C showed a 288-fold improvement over the free BGL. After 25 cycles, the immobilized enzyme still retained 95% of the original activity, thus demonstrating its prospects for commercial applications. High specific activity, high immobilization efficiency, improved stability, and reusability of A. arvensis BGL make this enzyme of potential interest in a number of industrial applications.     

Catalytic properties of the immobilized Talaromyces thermophilus β-xylosidase and its use for xylose and xylooligosaccharides production

The present study explores the efficiency of Talaromyces thermophilus β-xylosidase, in the production of xylose and xylooligosaccharides. The β-xylosidase was immobilized by different methods namely ionic binding, entrapment and covalent coupling and using various carriers. Chitosan, pre-treated with glutaraldehyde, was selected as the best support material for β-xylosidase immobilization; it gave the highest immobilization and activity yields (94%, 87%, respectively) of initial activity, and also provided the highest stability, retaining 94% of its initial activity even after being recycled 25 times. Shifts in the optimal temperature and pH were observed for the immobilized β-xylosidase when compared to the free enzyme. The maximal activity obtained for the immobilized enzyme was achieved at pH 8.0 and 53 °C, whereas that for the free enzyme was obtained at pH 7.0 and 50 °C. The immobilized enzyme was more thermostable than the free β-xylosidase. We observed an increase of the K_m values of the free enzyme from 2.37 to 3.42 mM at the immobilized state. Native and immobilized β-xylosidase were found to be stimulated by Ca²⁺, Mn²⁺ and Co²⁺ and to be inhibited by Zn²⁺, Cu²⁺, Hg²⁺, Fe²⁺, EDTA and SDS. Immobilized enzyme was found to catalyze the reverse hydrolysis reaction, forming xylooligosaccharides in the presence of a high concentration of xylose. In order to examine the synergistic action of xylanase and β-xylosidase of T. thermophilus, these two enzymes were co-immobilized on chitosan. A continuous hydrolysis of 3% Oat spelt xylan at 50 °C was performed and better hydrolysis yields and higher amount of xylose was obtained.     

Development of a monolith based immobilized lipase micro-reactor for biocatalytic reactions in a biphasic mobile system

This paper reports a simple method for producing macroporous silica-monoliths with controllable porosity that can be used for the immobilization of lipases to generate an active and stable micro-reactor for biocatalysis. A range of commercially available lipases has been examined using the hydrolysis reactions of 4-nitrophenyl butyrate in water–decane media. The kinetic studies performed have identified that a similar value for k_cat is obtained for the immobilized Candida antarctica lipase A (0.13 min⁻¹) and the free lipase in solution (0.12 min⁻¹) whilst the immobilized apparent Michaelis constant K_m (3.1 mM) is 12 times lower than the free lipase in solution (38 mM). A 96% conversion was obtained for the immobilized C. antarctica lipase A compared to only 23% conversion for the free lipase. The significant higher conversions obtained with the immobilized lipases were mainly attributed to the formation of a favourable biphasic system in the continuous flowing micro-reactor system, where a significant increase in the interfacial activation occurred. The immobilized C. antarctica lipase A on the monolith also exhibited improved stability, showing 64% conversion at 80 °C and 70% conversion after continuous running for 480 h, compared to 40 and 20% conversions under the same temperature and reaction time for the free lipase.     

Lipase-catalyzed asymmetric hydrolysis of 3-phenylglycidic acid ester,the key intermediate in the synthesis of diltiazem hydrochloride

Asymmetric hydrolytic enzymes for trans-3-(4-methoxyphenyl)glycidic acid methyl ester [(±)-MPGM], a key intermediate in the synthesis of diltiazem hydrochloride that is useful as a coronary vasodilator, were screened from 730 microorganisms. Among the microbial enzymes tested, Serratia marcescens lipase had the highest enantioselectivity (E=135) for hydrolysis of (±)-MPGM in a two-phase system using water (pH 8) and a water-immiscible solvent such as toluene. Resolution of (±)-MPGM by S. marcescens lipase gave (2R, 3S)-3-(4-methoxyphenyl)glycidic acid methyl ester [(−)-MPGM] with a reaction yield of 48% and optical purity of >99.9% e.e. After the reaction, the emulsion of toluene and water was separated into two clear layers by the addition of sodium dodecyl sulfate. The crystalline (−)-MPGM was isolated with a yield of over 43% and optical purity of 100% e.e. without column treatment. Diltiazem hydrochloride synthesis using asymmetric hydrolysis of (±)-MPGM was found to be a more efficient process compared to the conventional chemical synthetic process. Some enzymatic characterizations on asymmetric hydrolysis in two-phases of organic solvent-water by S. marcescens lipase were investigated.     

Enantioselective hydrolysis of β-hydroxy nitriles using the whole cell biocatalyst Rhodococcus rhodochrous ATCC BAA-870

Candida rugosa lipase was covalently immobilized onto silica gel in two different ways: via glutaraldehyde (L_GAL) and via hydrophobic spacer arm (1,6 diamino hexane) (L_SA). Free lipase, L_GAL and L_SA were used to investigate the hydrolysis of two different substrates, namely p-nitrophenyl palmytate (pNPP) and p-nitrophenyl acetate (pNPA), both in aqueous medium. In addition, these lipase samples were used to synthesize the pNPP from p-nitrophenol (pNP) and palmytic acid (PA) and pNPA from pNP and acetic acid (AA), both in hexane medium. Hydrolytic and synthetic activities of L_SA were higher than those of free lipase and L_GAL. Synthetic activities of free lipase, L_GAL and L_SA for pNPA in the presence of pNP and AA within hexane medium were higher than those of hydrolytic activities for pNPA in aqueous medium. The same tendency was also observed with pNPP. The effects of pH and temperature on hydrolytic and synthetic activities were investigated for all lipase preparations. Operational stability was the highest for L_GAL and L_SA when these enzymes were used for pNPP synthesis and in hexane medium, after 100 repeated uses, 68% and 51% of initial activities remained, respectively, at the end of 100 repeated cycles. Free lipase lost all of its activity within 15 and 20 days when stored at 25 °C and 5 °C, respectively. However, L_GAL showed 54% and 70% of initial activity at the end of 60 storage days at 25 °C and 5 °C, respectively, while these values were observed as 36% and 60% for L_SA.     

Synthesis of geranyl acetate in non-aqueous media using immobilized Pseudomonas cepacia lipase on biodegradable polymer film: Kinetic modelling and chain length effect study

Pseudomonas cepacia lipase (PCL) was immobilized on ternary blend biodegradable polymer made up of polylactic acid (PLA), chitosan (CH), and polyvinyl alcohol (PVA). Immobilized biocatalyst was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), % water content, protein and lipase activity assay. The lipase activity assay showed enhanced activity of immobilized lipase than crude lipase. Higher half life time (t_1/2) and lower deactivation rate constant (K_d) was found for the n-hexane among various tested solvent. Influence of various reaction parameters on enzyme activity were studied in detail. When geraniol (1 mmol) and vinyl acetate (4 mmol) in toluene (3 mL) were reacted with 50 mg immobilized lipase at 55 °C; then 99% geraniol was converted to geranyl acetate after 3 h. Various kinetic parameters such as r_max, K_i(A), K_m(A), K_m(B) were determined using non-linear regression analysis for ternary-complex and Bi–Bi ping-pong mechanism. The kinetic study showed that reaction followed ternary-complex mechanism with inhibition by geraniol. Activation energy (Ea) was found to be lower for immobilized lipase (13.76 kCal/mol) than crude lipase (19.9 kCal/mol) indicating better catalytic efficiency of immobilized lipase. Immobilized biocatalyst demonstrated 4 fold increased catalytic activity than crude lipase and recycled five times.     

Asymmetric reduction of 3-chloropropiophenone to (S)-3-chloro-1-phenylpropanol using immobilized Saccharomyces cerevisiae CGMCC 2266 cells

(S)-3-Chloro-1-phenylpropanol is an important chiral precursor for numerous antidepressants such as tomoxetine. A high enantiomeric excess (e.e.) of (S)-3-chloro-1-phenylpropanol can be achieved by asymmetric reduction of 3-chloropropiophenone using Saccharomyces cerevisiae CGMCC 2266 cells immobilized in calcium alginate. Thermal pretreatment of the immobilized cells at 50 °C for 30 min resulted in high enantioselectivity (99% e.e.) and good percent conversion (80%). The effects of various conditions on the reduction reaction were investigated. The optimal conditions were found to be as follows: sodium alginate concentration, 2%; bead diameter, 2 mm; temperature, 30 °C; re-culture time, 24 h; and batch addition of the substrate. After reusing these three times, the immobilized cells retained approximately 60% of their original catalytic activity with their enantioselectivity intact.     

Immobilization of α-amylase from mung beans (Vigna radiata) on Amberlite MB 150 and chitosan beads: A comparative study

α-Amylase from mung beans (Vigna radiata) was immobilized on two different matrices, Amberlite MB 150 and chitosan beads. Maximum immobilization obtained was 72% and 69% in case of Amberlite and chitosan beads, respectively. The pH optima of soluble α-amylase were 5.6, whereas that for immobilized amylase on chitosan and Amberlite was 7.0. Soluble amylase and Amberlite immobilized amylase showed maximum activity at 65 °C, whereas chitosan immobilized amylase showed maximum activity at 75 °C. α-Amylase immobilized on Amberlite showed apparent K_m of 2.77 mg/ml, whereas α-amylase immobilized on chitosan showed an apparent K_m of 5 mg/ml. The Amberlite-amylase and chitosan-amylase showed a residual activity of 43% and 27%, respectively, after 10 uses. The loss of activity for free amylase after 100 days of storage at 4 °C was 70%, whereas that for Amberlite- and chitosan-amylases, under the same experimental conditions, the losses were 45% and 55%, respectively. The easy availability of mung bean α-amylase, the ease of its immobilization on low-cost matrices and good stability upon immobilization in the present study makes it a suitable product for further use in industrial applications.     

Immobilization of Candida rugosa lipase on poly(3-hydroxybutyrate-co-hydroxyvalerate): a new eco-friendly support

The overall objective of this study is to evaluate the morphological [scanning electron microscopy (SEM)], physicochemical [differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), chemical composition analysis, Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR)], and biochemical properties of Candida rugosa lipase (CRL) immobilized on a natural biopolymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. CRL was immobilized by physical adsorption with efficiency of 30%. Compared with free CRL enzyme, there were slight changes in immobilized CRL activity as a function of temperature (from 37°C to 45°C), but a similar optimal pH value of 7.0. Inactivation rate constants for immobilized CRL enzyme were 0.009 and 0.334 h⁻¹, and half-lives were 77 and 2 h at 40°C and 60°C, respectively. Kinetic parameters obtained for immobilized CRL include the Michaelis–Menten constant of K _m = 213.18 mM and maximum reaction velocity of V _max = 318.62 U/g. The operational stability of immobilized CRL was tested repeatedly, and after 12 cycles of reuse, the enzyme retained 50% activity. Based on our results, we propose that PHBV-immobilized CRL could serve as a promising biocatalyst in several industrial applications.