Fmoc-based synthesis of the human CC chemokine CCL14/HCC-1 by SPPS and native chemical ligation

The CC chemokine CCL14/HCC-1(9-74), a 66-residue polypeptide containing two disulfide bonds, was recently discovered from a human hemofiltrate peptide library as a high-affinity ligand of the chemokine receptors CCR1 and CCR5. It has been shown to inhibit HIV infection by blocking CCR5. Using Fmoc methodology, we report the chemical synthesis of CCL14/HCC-1 by conventional stepwise solid-phase peptide synthesis (SPPS) and, alternatively, native chemical ligation. To optimize SPPS of CCL14/HCC-1, difficult sequence regions were identified by mass spectrometry, in order to obtain a crude tetrathiol precursor suitable for oxidative disulfide formation. For synthesis of CCL14/HCC-1 by native chemical ligation, the peptide was divided into two segments, CCL14/HCC-1(9-39) and CCL14/HCC-1(40-74), the latter containing a cysteine residue at the amino-terminus. The synthesis of the thioester segment was carried out comparing a thiol linker with a sulfonamide safety-catch linker. While the use of the thiol linker led to very low overall yields of the desired thioester, the sulfonamide linker was efficient in obtaining the 31-residue thioester of CCL14/HCC-1(9-39), suggesting a superior suitability of this linker in generating larger thioesters using Fmoc chemistry. The thioester of CCL14/HCC-1 was subsequently ligated with the cysteinyl segment to the full-length chemokine. Disulfides were introduced in the presence of the redox buffer cysteine/cystine. The products of both SPPS and native chemical ligation were identical. The use of a sulfonamide safety-catch linker enables the Fmoc synthesis of larger peptide thioesters, and is thus useful to generate arrays of larger polypeptides.     

Making Ends Meet: Microwave-Accelerated Synthesis of Cyclic and Disulfide Rich Proteins Via In Situ Thioesterification and Native Chemical Ligation

The development of synthetic methodologies for cyclic peptides is driven by the discovery of cyclic peptide drug scaffolds such as the plant-derived cyclotides, sunflower trypsin inhibitor 1 (SFTI-1) and the development of cyclized conotoxins. Currently, the native chemical ligation reaction between an N-terminal cysteine and C-terminal thioester group remains the most robust method to obtain a head-to-tail cyclized peptide. Peptidyl thioesters are effectively generated by Boc SPPS. However, their generation is challenging using Fmoc SPPS because thioester linkers are not stable to repeated piperidine exposure during deprotection. Herein we describe a Fmoc-based protocol for synthesizing cyclic peptides adapted for microwave assisted solid phase peptide synthesis. The protocol relies on the linker Di-Fmoc-3,4-diaminobenzoic acid, and we demonstrate the use of Gly, Ser, Arg and Ile as C-terminal amino acids (using HBTU and HATU as coupling reagents). Following synthesis, an N-acylurea moiety is generated at the C-terminal of the peptide; the resin bound acylurea peptide is then deprotected and cleaved from the resin. The fully deprotected peptide undergoes thiolysis in aqueous buffer, generating the thioester in situ. Ultimately, the head-to-tail cyclized peptide is obtained via native chemical ligation. Two naturally occurring cyclic peptides, the prototypical Möbius cyclotide kalata B1 and SFTI-1 were synthesized efficiently, avoiding potential branching at the diamino linker, using the optimized protocol. In addition, we demonstrate the possibility to use the approach for the synthesis of long and synthetically challenging linear sequences, by the ligation of two truncated fragments of a 50-residue long plant defensin.     

Fmoc-Protein Synthesis: Preparation of Peptide Thioesters Using a Side-Chain Anchoring Strategy

A side-chain anchoring approach for preparation of peptide thioesters by Fmoc SPPS is reported. This strategy involves the side-chain anchoring of trifunctional amino acids, such as Lys, Glu, Gln, Asp and Asn, for peptide elongation and the post-chain assembly introduction of thioester functionality. This approach allows for the use of standard nucleophilic Fmoc peptide synthesis cycles, which are generally incompatible with thioester-based resin-linkages. The strategy was successfully demonstrated by the straightforward Fmoc syntheses of a model RANTES(1--33) thioester peptide. The Fmoc prepared RANTES(1--33) thioester peptide was then ligated to RANTES(34--68), folded and purified to give the RANTES protein.     

Fmoc‐based peptide thioester synthesis with self‐purifying effect: heading to native chemical ligation in parallel formats

The chemical synthesis of proteins has facilitated functional studies of proteins due to the site‐specific incorporation of post‐translational modifications, labels, and non‐proteinogenic amino acids. Moreover, native chemical ligation provides facile access to proteins by chemical means. However, the application of the native chemical ligation reaction in the synthesis of parallel formats such as protein arrays has been complicated because of the often cumbersome and time‐consuming synthesis of the required peptide thioesters. An Fmoc‐based peptide thioester synthesis with self‐purification on the sulfonamide ‘safety‐catch’ linker widens this bottleneck because HPLC purification can be avoided. The method is based on an on‐resin cyclization–thiolysis reaction sequence. A macrocyclization via the N‐terminus of the full‐length peptide followed by a thiolytic C‐terminal ring opening allows selective detachment of the truncation products and the full‐length peptide. A brief overview of the chemical aspects of this method is provided including the optimization steps and the automation process. Furthermore, the application of the cyclization–thiolysis approach combined with the native chemical ligation reaction in the parallel synthesis of a library of 16 SH3‐domain variants of SHO1 in yeast is described, demonstrating the value of this new technique for the chemical synthesis of protein arrays. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Investigation of peptide thioester formation via N→Se acyl transfer

Native chemical ligation is widely used for the convergent synthesis of proteins. The peptide thioesters required for this process can be challenging to produce, particularly when using Fmoc‐based solid‐phase peptide synthesis. We have previously reported a route to peptide thioesters, following Fmoc solid‐phase peptide synthesis, via an N→S acyl shift that is initiated by the presence of a C‐terminal cysteine residue, under mildly acidic conditions. Under typical reaction conditions, we occasionally observed significant thioester hydrolysis as a consequence of long reaction times (~48 h) and sought to accelerate the reaction. Here, we present a faster route to peptide thioesters, by replacing the C‐terminal cysteine residue with selenocysteine and initiating thioester formation via an N→Se acyl shift. This modification allows thioester formation to take place at lower temperatures and on shorter time scales. We also demonstrate how application of this strategy also accelerates peptide cyclization, when a linear precursor is furnished with an N‐terminal cysteine and C‐terminal selenocysteine. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

A safety catch linker for Fmoc-based assembly of constrained cyclic peptides.

A new safety-catch linker for Fmoc solid-phase peptide synthesis of cyclic peptides is reported. The linear precursors were assembled on a tert-butyl protected catechol derivative using optimized conditions for Fmoc-removal. After activation of the linker using TFA, neutralization of the N-terminal amine induced cyclization with concomitant cleavage from the resin yielding the cyclic peptides in DMF solution. Several constrained cyclic peptides were synthesized in excellent yields and purities.     

Synthetic Approaches to Disulfide-free Circular Bovine Pancreatic Trypsin Inhibitor (c-BPTI) Analogues

Several approaches were investigated with the goal to obtain disulfide-free circularized analogues of the 58-residue small protein bovine pancreatic trypsin inhibitor (BPTI). These approaches include (1) a semisynthesis that uses as a starting point naturally occurring BPTI and takes advantage of the native proximity of the C- and N-termini; (2) a synthesis in which a peptide thioester prepared by stepwise Fmoc solid-phase chemistry is cyclized by a solution native chemical ligation step; (3) a stepwise Fmoc solid-phase synthesis of a protected circularly permuted linear sequence, followed by an attempted selective activation and head-to-tail cyclization; and (4) a stepwise Fmoc solid-phase synthesis of the same analogue, but using a different disconnection point, that features backbone amide linker (BAL) anchoring and attempted on-resin cyclization. The first two of these approaches were indeed successful in providing the desired target molecules in excellent purities and respectable yields, and could well be amenable to generalization. It is not yet clear whether or not the latter two approaches could be salvaged by modifications in the details of the chemical procedures applied.Taken in part from the February 2004 Ph.D. thesis of Judit Tulla-Puche. A preliminary report of portions of this work has appeared (Tulla-Puche et al., 2004).Dedicated to the memory of Bruce Merrifield (July 15, 1921--May 14, 2006), mentor and friend, whose conceptualization and development of solid-phase peptide synthesis opened new chapters of the chemical and biological sciences     

Peptide thioester preparation by Fmoc solid phase peptide synthesis for use in native chemical ligation.

Established methodology for the preparation of peptide thioesters requires the use of t-butoxycarbonyl chemistry owing to the lability of thioester linkers to the nucleophilic reagents used in Fmoc solid phase peptide synthesis. Both the greater ease of use and the broad applicability of the method has led to the development of an Fmoc-based methodology for direct peptide thioester synthesis. It was found that successful preparation of a peptide thioester could be achieved when the non-nucleophilic base, 1,8-diazabicyclo[5.4.0]undec-7-ene, together with 1-hydroxybenzotriazole in dimethylformamide, were used as the N(alpha)-Fmoc deprotection reagent. Native chemical ligation of the resulting thioester product to an N-terminal cysteine-containing peptide was successfully performed in aqueous solution to produce a fragment peptide of human alpha-synuclein. The formation of aspartimide (cyclic imide) in a base-sensitive hexapeptide fragment of scorpion toxin II was found to be significant under the deprotection conditions used. However, this could be controlled by the judicious protection of sensitive residues using the 2-hydroxy-4-methoxybenzyl group.     

Silyl linker-based approach to the solid-phase synthesis of Fmoc glycopeptide thioesters

An efficient solid-phase synthesis of Fmoc (glyco)peptide thioesters is described. Fmoc x Ser x OAll and Fmoc x Thr x OAll bound to resin with a silyl ether linker were deallylated by Pd(0) catalysis and condensed with thiophenol, benzyl mercaptane, and ethyl 3-mercaptopropionate by activation with DCC/HOBt. The thioesters were released from the resin either by treatment with CsF-AcOH or by acidic hydrolysis. The effectiveness of this silyl linker strategy is further demonstrated by the synthesis of more complex (glyco)peptide thioesters 25, 26 and 27 involving N-->C and C-->N peptide elongation.     

Multilayered Magnetic Nanoparticles as a Support in Solid-Phase Peptide Synthesis

The synthesis of multilayered magnetic nanoparticles (MNPs) for use as a support in solid-phase peptide synthesis (SPPS) is described. Silanization of magnetite (Fe₃O₄) nanoparticles with 3-(trimethoxysilyl)propyl methacrylate introduced polymerizable groups on the surface. Polymerization with allylamine, trimethylolpropane trimethacrylate, and trimethylolpropane ethoxylate (14/3 EO/OH) triacrylate provided a polymeric coating and amino groups to serve as starting points for the synthesis. After coupling of an internal reference amino acid and a cleavable linker, the coated MNPs were applied as the solid phase during synthesis of Leu-enkephalinamide and acyl carrier protein (65-74) by Fmoc chemistry. A “high-load” version of the MNP support (0.32 mmol/g) was prepared by four consecutive cycles of Fmoc-Lys(Fmoc)-OH coupling and Fmoc deprotection. Successful synthesis of Leu-enkephalin was demonstrated on the “high-load” MNPs. Chemical stability studies proved the particles to be stable under SPPS conditions and magnetization measurements showed that the magnetic properties of the particles were maintained throughout derivatizations and SPPS. The MNPs were further characterized by high-resolution transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, elemental analysis, and nitrogen gas adsorption measurements.     

Differential CCR1-mediated chemotaxis signaling induced by human CC chemokine HCC-4/CCL16 in HOS cells

Human CC chemokine-4 (HCC-4)/CCL16 is a chemoattractant for monocytes and lymphocytes. Although HCC-4 binds to multiple CC chemokine receptors, the receptor-mediated signal transduction pathway induced by HCC-4 has not been characterized. Human osteogenic sarcoma cells stably expressing CCR1 were used to investigate HCC-4-mediated chemotaxis signaling events via CCR1. The chemotactic activity of HCC-4 as well as those of other CCR1-dependent chemokines including MIP-1alpha/CCL3, RANTES/CCL5, and Lkn-1/CCL15 was inhibited by the treatment of pertussis toxin, an inhibitor of Gi/Go protein, U73122, an inhibitor of phospholipase C (PLC), and rottlerin, a specific inhibitor of protein kinase Cdelta (PKCdelta). These results indicate that HCC-4-induced chemotaxis signaling is mediated through Gi/Go protein, PLC, and PKCdelta. SB202190, an inhibitor of p38 mitogen activated protein kinase, only blocked the chemotactic activity of HCC-4, but not those of other CCR1-dependent chemokines. SB202190 inhibited HCC-4-induced chemotaxis in a dose-dependent manner (P < 0.01). HCC-4 induces p38 activation in both a time and dose-dependent manner. However, such p38 activation was not induced by other CCR1-dependent chemokines. To further investigate the differential effect of HCC-4, the Ca2+ mobilization was examined. HCC-4 induced no intracellular Ca2+ flux in contrast to other CCR1-dependent chemokines. These results indicate that HCC-4 transduces signals differently from other CCR1-dependent chemokines and may play different roles in the immune response.     

Native chemical ligation derived method for recombinant peptide/protein C-terminal amidation

C-terminal amidation is often a requisite structural feature for peptide hormone bio-activity. We report a chemical amidation method that converts peptide/protein thioesters into their corresponding C-terminal amides. The peptide/protein thioester is treated with 1-(2,4-dimethoxyphenyl)-2-mercaptoethyl auxiliary (1b) in a native chemical ligation (NCL) reaction to form an intermediate, which upon removal of the auxiliary with TFA, yields the peptide/protein amide. We have demonstrated the general utility of the approach by successfully converting several synthetic peptide thioesters to peptide amides with high conversion rates. Preliminary results of converting a recombinant peptide thioester to its amide form are also reported.     

To Rink or Not to Rink Amide Link, that is the Question to Address for More Economical and Environmentally Sound Solid-Phase Peptide Synthesis

A comparative study is presented on the solid-phase peptide synthesis (SPPS) of the acyl carrier protein (ACP 65–74) sequence on a series of Rink amide resins possessing different matrix structures: poly(vinyl alcohol)-graft-poly(ethylene glycol) (PVA-g-PEG, 4), Tentagel-S-RAM (TG, 5), NovaGel (NG, 6), ChemMatrix (CM, 7) and polystyrene-divinylbenzene (PS-DVB, 8). In this comparison, the PEG-containing resins proved significantly better suited for the synthesis of pure ACP target sequence than the conventional PS-DVB solid supports (75–90% versus 52% crude purity). Amongst themselves, the PEG resins 4-7 exhibited similar capacity for providing pure peptide. Selecting PVA-g-PEG resin for a comparison of Rink amide linker versus no linker, the ACP (65–74) sequence was synthesized directly on the PVA-g-PEG resin 1, under identical conditions as employed in the synthesis on resin 4 bearing the Fmoc Rink linker, except for the final cleavage step, which was performed under more environmentally sound conditions using ester displacement with aqueous ammonia. Relative to its Rink amide counterpart 4, PVA-g-PEG resin 1 was cheaper to produce and possessed twice as much loading capacity (0.48 vs. 0.81 mmol/g). Moreover, Rink-less resin 1 gave higher yields of isolated pure peptide (61 vs. 45%) relative to its Fmoc Rink linker counterpart 4. In light of these results, the importance of the linker has been brought into question. As the need for large scale solid-phase peptide synthesis grows with greater demand for peptide products, ideal resins should be inexpensive to produce and employable under environmentally sound conditions to provide pure products. In this light, PVA-g-PEG resin 1 has demonstrated significant promise for economic and “green” SPPS.     

Solid phase synthesis of an amphiphilic peptide modified for immobilisation at the C-terminus

The solid phase peptide synthesis (SPPS) of the amphiphilic peptide Ac-(Leu-Ala-Arg-Leu)(3)-linker, which is modified at the C-terminus with 1,8-diamino-3,6-dioxaoctane as linker moiety, has been investigated. Two different approaches that allow for the synthesis of C-terminally modified, side-chain protected peptides were examined. The solid phase peptide synthesis using aliphatic safety-catch resin followed by activation and aminolysis with the mono-Boc protected linker was compared with the synthesis on 1,8-diamino-3,6-dioxaoctane loaded 2-chlorotrityl resin.     

Chemical synthesis of La1 isolated from the venom of the scorpion Liocheles australasiae and determination of its disulfide bonding pattern

La1 is a 73‐residue cysteine‐rich peptide isolated from the scorpion Liocheles australasiae venom. Although La1 is the most abundant peptide in the venom, its biological function remains unknown. Here, we describe a method for efficient chemical synthesis of La1 using the native chemical ligation (NCL) strategy, in which three peptide components of less than 40 residues were sequentially ligated. The peptide thioester necessary for NCL was synthesized using an aromatic N‐acylurea approach with Fmoc‐SPPS. After completion of sequential NCL, disulfide bond formation was carried out using a dialysis method, in which the linear peptide dissolved in an acidic solution was dialyzed against a slightly alkaline buffer to obtain correctly folded La1. Next, we determined the disulfide bonding pattern of La1. Enzymatic and chemical digests of La1 without reduction of disulfide bonds were analyzed by liquid chromatography/mass spectrometry (LC/MS), which revealed two of four disulfide bond linkages. The remaining two linkages were assigned based on MS/MS analysis of a peptide fragment containing two disulfide bonds. Consequently, the disulfide bonding pattern of La1 was found to be similar to that of a von Willebrand factor type C (VWC) domain. To our knowledge, this is the first report of the experimental determination of the disulfide bonding pattern of peptides having a single VWC domain as well as their chemical synthesis. La1 synthesized in this study will be useful for investigation of its biological role in the venom. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Aqueous Synthesis of Peptide Thioesters from Amino Acids and a Thiol Using 1,1′-Carbonyldiimidazole

A new method was developed for the synthesis of peptide thioesters from free amino acids and thiols in water. This one-pot simple method involves two steps: (1) activation in water of an amino acid presumably as its N-carboxyanhydride (NCA) using 1,1′-carbonyldiimidazole (CDI), and (2) subsequent condensation of the activated amino acid-NCA in the presence of a thiol. With this method citrulline peptide thioesters containing up to 10 amino acid residues were prepared in a single reaction. This aqueous synthetic method provides a simple way to prepare peptide thioesters for studies of peptide replication involving ligation of peptide thioesters on peptide templates. The relevance of peptide replication to the origin-of-life process is supported by previous studies showing that amino acid thioesters (peptide thioester precursors) can be synthesized under prebiotic conditions by reaction of small sugars with ammonia and a thiol.     

A simple oxazolidine linker for solid-phase synthesis of peptide aldehydes

A very simple and cheap linker has been used for solid-phase synthesis of peptide aldehydes. Protected amino acid aldehydes are immobilized on 2-Cl(trt) resin as oxazolidine formation via diethanolamine. After classical Fmoc SPPS, treatment of the resin with AcOH/DCM/H(2)O (8:1:1) affords peptide aldehydes in high yield and purity.     

High-throughput synthesis of conopeptides: a safety-catch linker approach enabling disulfide formation in 96-well format.

Conotoxins exhibit a high degree of selectivity and potency for a range of pharmacologically relevant targets. The rapid access to libraries of conotoxin analogues, containing multiple intramolecular disulfide bridges for use in drug development, can be a very labor intensive, multi-step task. This work describes a high-throughput method for the synthesis of cystine-bridged conopeptides.Peptides were assembled on a peptide synthesizer employing the Fmoc solid-phase strategy using a safety-catch amide linker (SCAL). Side-chain protecting groups were removed on solid phase before SCAL activation with ammonium iodide in TFA, finally releasing the peptide into the TFA solution. Disulfide bond formation was performed in the cleavage mixture employing DMSO.This improved method allows mixtures of oxidized peptides to be obtained in parallel directly from a peptide synthesizer. A single HPLC purification of the resulting crude oxidized material produced peptides of > 95% purity.     

Synthesis of peptide thioesters via an N–S acyl shift reaction under mild acidic conditions on an N‐4,5‐dimethoxy‐2‐mercaptobenzyl auxiliary group

An efficient method of peptide thioester synthesis is described. The reaction is based on an N‐4,5‐dimethoxy‐2‐mercaptobenzyl (Dmmb) auxiliary‐assisted N‐S acyl shift reaction after assembling a peptide chain by Fmoc‐solid phase peptide synthesis. The Dmmb‐assisted N‐S acyl shift reaction proceeded efficiently under mildly acidic conditions, and the peptide thioester was obtained by treating the resulting S‐peptide with sodium 2‐mercaptoethanesulfonate. No detectable epimerization of the amino acid residue adjacent to the thioester moiety in the case of Leu was found. The reactions were also amenable to the on‐resin preparation of peptide thioesters. The utility was demonstrated by the synthesis of a 41‐mer peptide thioester, a phosphorylated peptide thioester and a 33‐mer peptide thioester containing a trimethylated lysine residue. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Comparative syntheses of peptides and peptide thioesters derived from mouse and human prion proteins

Prions are suspected as causative agents of several neuropathogenic diseases, even though the mode of their action is still not clear. A combination of chemical and recombinant syntheses can provide suitable probes for explanation of prions role in pathogenesis of neurodegenerative diseases. However, the prions contain several difficult sequences for synthesis by Fmoc/tBu approach. For that reason, the peptide thioesters as the key building blocks for chemical syntheses of proteins by native chemical ligation were employed. A scan of the mouse prion domain 93-231 was carried out in order to discover availability of derived thioesters as the suitable building blocks for a total chemical synthesis of the prion protein based probes. The synthesis on 2-chlorotritylchloride resin was utilized and after a deprotection of the samples for analysis, the peptide segments were purified and characterized. If the problems were detected during the synthesis, the segment was re-synthesized either using the special pseudoproline dipeptides or by splitting its molecule to two or three smaller segments, which were prepared easier. The protected segments, prepared correctly without any deletion and in sufficient amounts, were coupled either with EtSH after DIC/DMAP activation or with p-Ac-NH-Ph-SH using PyBOP activation to yield corresponding thioesters. In some special cases, the other techniques of thioester formation, like sulfonamide-safety catch and/or trimethylaluminium approach were utilized.