Folding of a peptide corresponding to the alpha-helix in bovine pancreatic trypsin inhibitor

A short peptide corresponding to the alpha-helical region of BPTI shows partial folding in aqueous solution (pH 7) as judged by circular dichroism (CD). Folding is temperature and denaturant sensitive, and the peptide is monomeric. The difference CD spectrum, obtained from spectra at two temperatures, indicates that the peptide folds as an alpha-helix. Difference CD spectroscopy provides a sensitive assay for helix formation in peptides exhibiting small amounts of structure. Helix stability in this peptide shows a marked pH dependence which is consistent with stabilizing charged side-chain interactions with the helix dipole and/or salt bridge formation.     

Helicity of alpha(404-451) and beta(394-445) tubulin C-terminal recombinant peptides

We have investigated the solution conformation of the functionally relevant C-terminal extremes of alpha- and beta-tubulin, employing the model recombinant peptides RL52alpha3 and RL33beta6, which correspond to the amino acid sequences 404-451(end) and 394-445(end) of the main vertebrate isotypes of alpha- and beta-tubulin, respectively, and synthetic peptides with the alpha-tubulin(430-443) and beta-tubulin(412-431) internal sequences. Alpha(404-451) and beta(394-445) are monomeric in neutral aqueous solution (as indicated by sedimentation equilibrium), and have circular dichroism (CD) spectra characteristic of nearly disordered conformation, consistent with low scores in peptide helicity prediction. Limited proteolysis of beta(394-445) with subtilisin, instead of giving extensive degradation, resulted in main cleavages at positions Thr409-Glu410 and Tyr422-Gln423-Gln424, defining the proteolysis resistant segment 410-422, which corresponds to the central part of the predicted beta-tubulin C-terminal helix. Both recombinant peptides inhibited microtubule assembly, probably due to sequestration of the microtubule stabilizing associated proteins. Trifluoroethanol (TFE)-induced markedly helical CD spectra in alpha(404-451) and beta(394-445). A substantial part of the helicity of beta(394-445) was found to be in the CD spectrum of the shorter peptide beta(412-431) with TFE. Two-dimensional 1H-NMR parameters (nonsequential nuclear Overhauser effects (NOE) and conformational C alphaH shifts) in 30% TFE permitted to conclude that about 25% of alpha(404-451) and 40% of beta(394-451) form well-defined helices encompassing residues 418-432 and 408-431, respectively, flanked by disordered N- and C-segments. The side chains of beta(394-451) residues Leu418, Val419, Ser420, Tyr422, Tyr425, and Gln426 are well defined in structure calculations from the NOE distance constraints. The apolar faces of the helix in both alpha and beta chains share a characteristic sequence of conserved residues Ala,Met(+4),Leu(+7),Tyr(+11). The helical segment of alpha(404-451) is the same as that described in the electron crystallographic model structure of alphabeta-tubulin, while in beta(394-451) it extends for nine residues more, supporting the possibility of a functional coil --> helix transition at the C-terminus of beta-tubulin. These peptides may be employed to construct model complexes with microtubule associated protein binding sites.     

Structure-activity analysis of quorum-sensing signaling peptides from Streptococcus mutans

Streptococcus mutans secretes and utilizes a 21-amino-acid signaling peptide pheromone to initiate quorum sensing for genetic competence, biofilm formation, stress responses, and bacteriocin production. In this study, we designed and synthesized a series of truncated peptides and peptides with amino acid substitutions to investigate their structure-activity relationships based on the three-dimensional structures of S. mutans wild-type signaling peptide UA159sp and C-terminally truncated peptide TPC3 from mutant JH1005 defective in genetic competence. By analyzing these peptides, we demonstrated that the signaling peptide of S. mutans has at least two functional domains. The C-terminal structural motif consisting of a sequence of polar hydrophobic charged residues is crucial for activation of the signal transduction pathway, while the core alpha-helical structure extending from residue 5 to the end of the peptide is required for receptor binding. Peptides in which three or more residues were deleted from the C terminus did not induce genetic competence but competitively inhibited quorum sensing activated by UA159sp. Disruption of the amphipathic alpha-helix by replacing the Phe-7, Phe-11, or Phe-15 residue with a hydrophilic residue resulted in a significant reduction in or complete loss of the activity of the peptide. In contrast to the C-terminally truncated peptides, these peptides with amino acid substitutions did not compete with UA159sp to activate quorum sensing, suggesting that disruption of the hydrophobic face of the alpha-helical structure results in a peptide that is not able to bind to the receptor. This study is the first study to recognize the importance of the signaling peptide C-terminal residues in streptococcal quorum sensing.     

Oligopeptide-mediated helix stabilization of model peptides in aqueous solution.

Oligopeptide-mediated helix stabilization of peptides in hydrophobic solutions was previously found by NMR and CD spectroscopic studies. The oligopeptide included the hydrophobic amino acids found in its parent peptide and were interposed by relevant basic oracidic amino acids. The strength of the interactions depended on the amino acid sequences. However, no helix-stabilizing effect was seen for the peptides in phosphate buffer solution, because the peptides assumed a random-coil structure. In order to ascertain whether the helix-stabilizing effect of an oligopeptide on its parent peptide could operate in aqueous solution, model peptides EK17 (Ac-AEAAAAEAAAKAAAAKA-NH2) and IFM17 (Ac-AEAAAAEIFMKAAAAKA-NH2) that may assume an alpha-helix in aqueous solutions were synthesized. Interactions were examined between various oligopeptides (EAAAK, KAAAE, EIFMK, KIFME, KIFMK and EYYEE) and EK17 or IFM17 in phosphate buffer and in 80% trifluoroethanol (TFE)-20% H2O solutions by CD spectra. EAAAK had little effect on the secondary structures of EK17 in both buffer and TFE solutions, while KAAAE, which has the reverse amino acid sequence of EAAAK, had a marked helix-destabilizing effect on EK17 in TFE. EIFMK and KIFME were found to stabilize the alpha-helical structure of EK17 in phosphate buffer solutions, whereas KIFMK and EYYEE destabilized the alpha-helical structure of EK17. EIFMK and KIFME had no effect on IFM17, because unexpectedly, IFM17 had appreciable amounts of beta-sheet structure in buffer solution. It was concluded that in order for the helix-stabilizing (1) the model peptide, the alpha-helical conformation of which is to be stabilized, should essentially assume an alpha-helical structure by nature, and (2) the hydrophobicity of the side-chains of the oligopeptide should be high enough for the oligopeptide to perform stable specific side chain-side chain intermolecular hydrophobic interactions with the model peptide.     

Synthesis and secondary structural studies of penta(acetyl-Hmb)A beta(1-40).

The Fmoc solid phase synthesis of A beta(1-40), a strongly aggregating peptide found in Alzheimer's disease brain, was performed using 2-hydroxy-4-methoxybenzyl (Hmb) backbone amide protection. Hmb-Gly residues were incorporated using N(alpha)-Fmoc-Hmb-Gly-OH rather than N,O-bisFmoc-Hmb-Gly-OPfp. Amino acid acylation of the sterically hindered Hmb-amino acids was monitored using 'semi-on-line' MALDI-TOF-MS in a novel application of this technique which significantly simplified the successful incorporation of these residues. Standard coupling conditions in N,N-dimethylformamide (DMF) were used throughout the synthesis. Comparative structural studies of acetyl-Hmb-protected and native A beta(1-40) were performed to investigate the structural basis of Hmb-mediated disaggregation. The incorporation of backbone amide protection was observed by circular dichroism spectroscopy and gel electrophoresis to strongly affect the solution structure of A beta(1-40). Despite the reported structure-breaking activity of Hmb groups, penta(acetyl-Hmb)A beta(1-40) was found to adopt both alpha-helix and intermolecular beta-sheet conformations. In 100% TFE a mixed alpha-helix/random coil structure was formed by the protected peptide indicating reduced alpha-helical propensity relative to A beta(1-40). The protected peptide formed beta-sheet structures in aqueous buffer. Gel electrophoresis indicated that, unlike native A beta(1-40), penta(acetyl-Hmb)A beta(1-40) did not form large aggregate species.     

Solution structure of O-glycosylated C-terminal leucine zipper domain of human salivary mucin (MUC7)

Solution structures of a 23 residue glycopeptide II (KIS* RFLLYMKNLLNRIIDDMVEQ, where * denotes the glycan Gal-beta-(1-3)-alpha-GalNAc) and its deglycosylated counterpart I derived from the C-terminal leucine zipper domain of low molecular weight human salivary mucin (MUC7) were studied using CD, NMR spectroscopy and molecular modeling. The peptide I was synthesized using the Fmoc chemistry following the conventional procedure and the glycopeptide II was synthesized incorporating the O-glycosylated building block (Nalpha-Fmoc-Ser-[Ac4-beta-D-Gal-(1,3)-Ac2-alpha-D-GalN3+ ++]-OPfp) at the appropriate position in stepwise assembly of peptide chain. Solution structures of these glycosylated and nonglycosylated peptides were studied in water and in the presence of 50% of an organic cosolvent, trifluoroethanol (TFE) using circular dichroism (CD), and in 50% TFE using two-dimensional proton nuclear magnetic resonance (2D 1H NMR) spectroscopy. CD spectra in aqueous medium indicate that the apopeptide I adapts, mostly, a beta-sheet conformation whereas the glycopeptide II assumes helical structure. This transition in the secondary structure, upon glycosylation, demonstrates that the carbohydrate moiety exerts significant effect on the peptide backbone conformation. However, in 50% TFE both the peptides show pronounced helical structure. Sequential and medium range NOEs, CalphaH chemical shift perturbations, 3JNH:CalphaH couplings and deuterium exchange rates of the amide proton resonances in water containing 50% TFE indicate that the peptide I adapts alpha-helical structure from Ile2-Val21 and the glycopeptide II adapts alpha-helical structure from Ser3-Glu22. The observation of continuous stretch of helix in both the peptides as observed by both NMR and CD spectroscopy strongly suggests that the C-terminal domain of MUC7 with heptad repeats of leucines or methionine residues may be stabilized by dimeric leucine zipper motif. The results reported herein may be invaluable in understanding the aggregation (or dimerization) of MUC7 glycoprotein which would eventually have implications in determining its structure-function relationship.     

Characterization of a synthetic peptide corresponding to a receptor binding domain of mouse interferon gamma.

A receptor binding region of mouse interferon gamma (IFN gamma) has previously been localized to the N-terminal 39 amino acids of the molecule by use of synthetic peptides and monoclonal antibodies. In this report, a detailed analysis of the synthetic peptide corresponding to this region, IFN gamma (1-39), is presented. Circular dichroism (CD) spectroscopy indicated that the peptide has stable secondary structure under aqueous conditions and adopts a combination of alpha-helical and random structure. A peptide lacking two N-terminal amino acids, IFN gamma (3-39), had similar secondary structure and equivalent ability to compete for receptor binding, while peptides lacking four or more N-terminal residues had reduced alpha-helical structure and did not inhibit 125I-IFN gamma binding. Substitution of proline, a helix-destabilizing amino acid, for leucine (residue 8) of a predicted amphipathic alpha-helix (residues 3-12), IFN gamma (1-39) [Pro]8, resulted in a substantial reduction in the helical content of the peptide, supporting the presence of helical structure in this region. However, destabilization of the helix did not reduce the competitive ability of the peptide. A peptide lacking eight C-terminal residues, IFN gamma (1-31), did not block 125I-IFN gamma binding and had no detectable alpha-helical structure, suggesting a requirement of the predicted second alpha-helix (residues 20-34) for receptor interaction and helix stabilization. Substitution of phenylalanine for tyrosine at position 14, IFN gamma (1-39) [Phe]14, a central location of a predicted omega-loop structure, did not affect the secondary structure associated with the region yet resulted in a 30-fold increase in receptor competition.(ABSTRACT TRUNCATED AT 250 WORDS)     

Structural analysis of amyloid beta peptide fragment (25-35) in different microenvironments

Amyloid beta (Abeta) peptides are one of the classes of amphiphilic molecules that on dissolution in aqueous solvents undergo interesting conformational transitions. These conformational changes are known to be associated with their neuronal toxicity. The mechanism of structural transition involved in the monomeric Abeta to toxic assemblage is yet to be understood at the molecular level. Early results indicate that oriented molecular crowding has a profound effect on their assemblage formation. In this work, we have studied how different microenvironments affect the conformational transitions of one of the active amyloid beta-peptide fragments (Abeta(25-35)). Spectroscopic techniques such as CD and Fourier transform infrared spectroscopy were used. It was observed that a stored peptide concentrates on dissolution in methanol adopts a minor alpha-helical conformation along with unordered structures. On changing the methanol concentration in the solvated film form, the conformation switches to the antiparallel beta-sheet structure on the hydrophilic surface, whereas the peptide shows transition from a mixture of helix and unordered structure into predominantly a beta-sheet with minor contribution of helix structure on the hydrophobic surface. Our present investigations indicate that the conformations induced by the different surfaces dictate the gross conformational preference of the peptide concentrate.     

NMR structural characterization of cecropin A(1-8) - magainin 2(1-12) and cecropin A (1-8) - melittin (1-12) hybrid peptides.

In order to elucidate the structure-antibiotic activity relationships of the peptides, the three-dimensional structures of two hybrid peptides, CA(1-8) - MA(1-12) and CA(1-8) - ME(1-12) in trifluoroethanol-containing aqueous solution were investigated by NMR spectroscopy. Both CA(1-8) - MA(1-12) and CA(1-8) - ME(1-12) have strong antibacterial activity but only CA(1-8) - ME(1-12) has hemolytic activity against human erythrocytes. CA(1-8) - MA(1-12) has a hydrophobic 310-helix of only two turns combined with one short helix in the N-terminus with a flexible hinge section in between. CA(1-8) - MA(1-12) has a severely bent structure in the middle of the peptide. These structural features as well as the low hydrophobicity of CA(1-8) - MA(1-12) seem to be crucial for the selective lysis against the membrane of prokaryotic cells. CA(1-8) - ME(1-12) has an alpha-helical structure of about three turns in the melittin domain and a flexible structure with one turn in the cecropin domain connected with a flexible hinge section in between, and these might be the structural features required for membrane disruption against prokaryotic and eukaryotic cells. The central hinge region (Gly9-Ile10-Gly11) in an amphipathic antibacterial peptide is considered to play an important role in providing the conformational flexibility required for ion channel formation of the C-terminal hydrophobic alpha-helix on cell membrane.     

Ultraviolet Raman examination of the environmental dependence of bombolitin I and bombolitin III secondary structure.

Bombolitin I and III (BI and BIII) are small amphiphilic peptides isolated from bumblebee venom. Although they exist in predominately nonhelical conformations in dilute aqueous solutions, we demonstrate, using UV Raman spectroscopy, that they become predominately alpha-helical in solution at pH > 10, in high ionic strength solutions, and in the presence of trifluoroethanol (TFE) and dodecylphosphocholine (DPC) micelles. In this paper, we examine the effects of electrostatic and hydrophobic interactions that control folding of BI and BIII by systematically monitoring their secondary structures as a function of solution conditions. We determine the BI and BIII secondary structure contents by using the quantitative UV Raman methodology of Chi et al. (1998. Biochemistry. 37:2854-2864). Our findings suggest that the alpha-helix turn in BIII at neutral pH is stabilized by a salt bridge between residues Asp2 and Lys5. This initial alpha-helical turn results in different BI and BIII alpha-helical folding mechanisms observed in high pH and high salt concentrations: BIII folds from its single alpha-helix turn close to its N-terminal, whereas the BI alpha-helix probably nucleates within the C-terminal half. We also used quasielastic light scattering to demonstrate that the BI and BIII alpha-helix formation in 0.2 M Ca(ClO4)2 is accompanied by formation of trimers and hexamers, respectively.     

Secondary conformations and temperature effect on structural transformation of amyloid beta (1-28), (1-40) and (1-42) peptides

Secondary structure of three amyloid b-peptides [A beta(1-28), A beta(1-40) and A beta(1-42)] in the solid state was respectively determined by Fourier transform infrared (FT-IR) microspectroscopy. Their thermal-dependent structural transformation were also investigated by FT-IR microspectroscopy equipped with a thermal analyzer. The present result demonstrates that the solid-state A beta(1-28), A beta(1-40) and A beta(1-42) peptides showed a significant IR spectral difference in the amide I and II bands. The secondary conformation of A beta(1-28) peptide was the combination of major beta-sheet and minor alpha-helix with little random coil structures, but A beta(1-40) peptide showed the co-existence of major beta-sheet and minor random coil with little alpha-helix structures. A beta(1-42) peptide mainly consisted of the predominant b-sheet structure. Although the intact A beta(1-28), A beta(1-40) or A beta(1-42) peptide exhibits a different secondary structure, a similar beta-conformation may form after thermal treatment. A thermal-dependent transition was found for solid A beta(1-28) and A beta(1-40) peptides near 40 degrees C and 45 degrees C, respectively. There was no transition temperature for solid A beta(1-42) peptide, however, due to only a very little level of alpha-helix and random coil structure containing in the solid A beta(1-42) peptide. The thermal denaturation plays an important role in the structural transformation from alpha-helix/random coil to beta-sheet.     

Involvement of electrostatic interactions in the mechanism of peptide folding induced by sodium dodecyl sulfate binding

Sodium dodecyl sulfate (SDS) has consistently been shown to induce secondary structure, particularly alpha-helices, in polypeptides, and is commonly used to model membrane and other hydrophobic environments. However, the precise mechanism by which SDS induces these conformational changes remains unclear. To examine the role of electrostatic interactions in this mechanism, we have designed two hydrophilic, charged amphipathic alpha-helical peptides, one basic (QAPAYKKAAKKLAES) and the other acidic (QAPAYEEAAEELAKS), and their structures were studied by CD and NMR. The design of the peptides is based on the sequence of the segment of residues 56-70 of human platelet factor 4 [PF4(56-70), QAPLYKKIIKKLLES]. Both peptides were unstructured in water, and in the presence of neutral, zwitterionic, or cationic detergents. However, in SDS at neutral pH, the basic peptide folded into an alpha-helix. By contrast, the pH needed to be lowered to 1.8 before alpha-helix formation was observed for the acidic peptide. Strong, attractive electrostatic interactions, between the anionic groups of SDS and the cationic groups of the lysines, appeared to be necessary to initiate the folding of the basic peptide. NMR analysis showed that the basic peptide was fully embedded in SDS-peptide micelles, and that its three-dimensional alpha-helical structure could be superimposed on that of the native structure of PF4(56-70). These results enabled us to propose a working model of the basic peptide-SDS complex, and a mechanism for SDS-induced alpha-helical folding. This study demonstrates that, while the folding of peptides is mostly driven by hydrophobic effects, electrostatic interactions play a significant role in the formation and the stabilization of SDS-induced structure.     

Stabilization of an alpha-helical conformation in an isolated hexapeptide inhibitor of calmodulin.

The conformational properties of two hexapeptides, Ac-LWRILW-NH(2) and its D-amino acid counterpart Ac-lwrilw-NH(2), identified as calmodulin inhibitors using mixture-based synthetic combinatorial library approaches, have been characterised by NMR and CD spectroscopy. The peptides fold into an alpha-helical conformation in aqueous solution. The observed short- and medium-range nuclear Overhauser effects were consistent with the formation of an alpha-helical structure and a reasonably well-defined set of structures was obtained by using restraints from the NMR data in simulated annealing calculations. Analysis of glycine-substitution analogues demonstrated that all the amino acids that make up the peptide sequence are important for the stabilization of the alpha-helical conformation. The results suggest that a well-defined set of interactions is indispensable to allow alpha-helix formation in this short hexapeptide.     

pH-Dependent conformational changes and topology of a herpesvirus translocating peptide in a membrane-mimetic environment

Pol peptide, an oligopeptide corresponding to the 27 C-terminal amino acids of DNA polymerase from herpes simplex virus type 1, has recently been suggested to translocate from endosomal compartments into the cytosol after being intracellularly delivered via a protein carrier. While an acidic environment was thought to be important for Pol peptide membrane translocation, the mechanism of translocation remains unclear. To investigate the influence of an acidic environment on the conformational properties of the peptide and on its propensity to interact with lipid bilayers, we characterized the structure of Pol peptide at different pH values by both circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy. The influence of detergent micelles, which mimic biological lipid membranes, on the peptide secondary structure was also studied. Our CD results indicate that the peptide is in a random conformation in aqueous solution at both acidic and basic pH, whereas in the presence of dodecylphosphocholine (DPC) micelles, it assumes a partial alpha-helical structure which is significantly pH-dependent. An NMR study confirmed that, in the presence of DPC micelles, a short C-terminal alpha-helix is present at pH 6.5, whereas almost two-thirds of the peptide (residues 10-26) fold into an extended amphipathic alpha-helix at pH 4.0. The orientation of Pol peptide relative to the DPC micelle was investigated using paramagnetic probes at both pH 4.0 and 6.5. These studies show that the peptide inserts deeply into the micelle at pH 4.0, whereas it is more exposed to the aqueous environment at pH 6.5. On the basis of these results, a model which might explain the mechanism of translocation of Pol peptide from acidic endosomes to the cytosol is discussed.     

Comparison of the structures of beta amyloid peptide (25-35) and substance P in trifluoroethanol/water solution

The three-dimensional structure of beta amyloid peptide (25-35) in aqueous solution with 50% (vol/vol) 2,2,2-trifluoroethanol was determined by NMR spectroscopy. Beta amyloid peptide(Abeta) is the major component of senile plaques found in the brain of patient of Alzheimer's disease. Abeta25-35 is biologically active fragment of Abeta and exhibits some sequence homology with the tachykinin family. In this study, we present the structural similarity between Abeta25-35 and substance P which is a member of tachykinin family in order to examine the possibility of sharing pathways mediated by tachykinin receptors. Both peptides have alpha-helical structures in their C-terminal regions and aromatic rings or hydrophobic side chains in the center of the helix protrude outside. These conformational features are expected to be the key for the interaction with the receptors.     

The chimeric peptide [Lys(-2)-Arg(-1)]-sarafotoxin-S6b, composed of the endothelin pro-sequence and sarafotoxin, retains the salt-bridge staple between Arg(-1) and Asp8 previously observed in [Lys(-2)-Arg(-1)]-endothelin. Implications of this salt-bridge in the contractile activity and the oxidative folding reaction.

The chimeric peptide [Lys(-2)-Arg(-1)]-sarafotoxin-S6b (KR-SRTb) designed from the Lys-2-Arg-1 dipeptide of the endothelin pro-sequence and the sarafotoxin-S6b sequence was synthesized. Its contractile activity was found to be decreased markedly when compared with that of the parent SRTb. In contrast, the extension by the Lys-Arg dipeptide was found to increase the formation of the native disulfide isomer (82/18 versus 96/4) when the reaction was carried out in the presence of redox reagents. The solution structure of KR-SRTb was determined by NMR as a function of pH. In the carboxylic acid state, the structure consists of the cystine-stabilized alpha-helical motif, with the alpha-helical part spanning residues 9-15, and of an unstructured C-terminal tail. In the carboxylate state, the structure is characterized by a salt-bridge between Arg(-1) and Asp8, which we identified previously in the [Lys(-2)-Arg(-1)]-endothelin-1 peptide (KR-ET-1). The fact that this salt-bridge is commonly observed in KR-SRTb and KR-ET-1, despite the 33% sequence difference between the corresponding parental peptides, highlights the remarkable adaptability of the Lys-Arg extension for the formation of a special salt-bridge. As a consequence, this salt-bridge, which does not depend on either the 4-7 sequence of the loop or the C-terminal sequence, appears to be particularly well suited to improve the stability of the cystine-stabilized alpha-helical motif. Therefore, because of its high yield in the native disulfide arrangement and its high permissiveness for sequence mutation in the 4-7 loop, such a stabilized cystine-stabilized alpha-helical motif could be a valuable scaffold for the presentation of a library of constrained short peptides.     

Secondary structure of the MiRP1 (KCNE2) potassium channel ancillary subunit

MiRP1 (encoded by the KCNE2 gene) is one of a family of five single transmembrane domain voltage-gated potassium (Kv) channel ancillary subunits currently under intense scrutiny to establish their position in channel complexes and elucidate alpha subunit contact points, but its structure is unknown. MiRP1 mutations are associated with inherited and acquired cardiac arrhythmia. Here, synthetic peptides corresponding to human MiRP1 (full-length and separate domains) were structurally analyzed using FTIR and CD spectroscopy. The N-terminal (extracellular) domain was soluble and predominantly non-ordered in aqueous media, but predominantly alpha-helical in L-alpha-lysophosphatidylcholine (LPC) micelles. The MiRP1 transmembrane domain was predominantly a mixture of alpha-helix and non-ordered structure in LPC micelles, with a minor contribution from non-aggregated beta-strand. The intracellular C-terminal domain was insoluble in aqueous solution; reconstitution into non-aqueous environments resulted in solubility and adoption of increasing amounts of alpha-helix, with the solvent order sodium dodecyl sulphate < dimyristoyl L-alpha-phosphatidylcholine (DMPC) < LPC < trifluoroethanol. Correlation of secondary structure changes with lipid transition temperature during heating suggested that the MiRP1 C-terminus incorporates into DMPC bilayers. Full-length MiRP1 was soluble in SDS micelles and calculated to contain 34% alpha-helix, 23% beta-strand and 43% non-ordered structure in this environment, as determined by CD spectroscopy. Thus, MiRP1 is highly dependent upon hydrophobic interaction via lipid and/or protein contacts for adoption of ordered structure without nonspecific aggregation, consistent with a role as a membrane-spanning subunit within Kv channel complexes. These data will provide a structural framework for ongoing mutagenesis-based in situ structure-function studies of MiRP1 and its relatives.     

Comparison between UV Raman and circular dichroism detection of short alpha helices in bombolitin III

We have used UV resonance Raman (UVRR) and circular dichroism (CD) spectroscopies to examine the dilute solution-phase secondary structure of the 17 amino acid peptide Bombolitin III (BIII). Both UVRR and CD clearly observe the alpha-helix structure induced by the addition of trifluoroethanol (TFE) to BIII. In contrast, only UVRR is able to detect the single alpha-helical turn induced by increasing the pH of BIII from pH 1.8 to 6.4. This alpha-helical turn is formed because of a stabilizing salt bridge formed between Lys(2) and Asp(5). Further increases in the alpha-helix content occur as the pH is raised further. We compare the relative sensitivity of UVRR and CD to short alpha helices and find, as expected, that the CD cannot detect short alpha helices. This study demonstrates that UV Raman measurements can detect the formation of single alpha-helical turns which cannot be detected by CD measurements.     

Structural elucidation of the protein- and membrane-binding properties of the N-terminal tail domain of human annexin II

The conformational preferences and the solution structure of AnxII(N31), a peptide corresponding to the full-length sequence (residues 1-31) of the human annexin II N-terminal tail domain, were investigated by circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy. CD results showed that AnxII(N31) adopts a mainly alpha-helical conformation in hydrophobic or membrane-mimetic environments, while a predominantly random structure is adopted in aqueous buffer. In contrast to previous results of the annexin I N-terminal domain peptide [Yoon et al. (2000) FEBS Lett. 484, 241-245], calcium ions showed no effect on the structure of AnxII(N31). The NMR-derived structure of AnxII(N31) in 50% TFE/water mixture showed a horseshoe-like fold comprising the N-terminal amphipathic alpha-helix, the following loop, and the C-terminal helical region. Together, the results establish the first detailed structural data on the N-terminal tail domain of annexin II, and suggest the possibility of the domain to undergo Ca(2+)-independent membrane-binding.     

Peptide models of dynorphin A(1-17) incorporating minimally homologous substitutes for the potential amphiphilic beta strand in residues 7-15

Two peptide models of dynorphin A(1-17) have been synthesized. These peptides incorporate a minimally homologous substitute sequence for residues 6-17, including alternating lysine and valine residues substituting for the potential amphiphilic beta-strand structure in positions 7-15. Model 1 retains Pro10 from the native sequence, but model 2 does not. Compression isotherms of peptide monolayers at the air-water interface and CD spectra of peptide films adsorbed from aqueous solution onto siliconized quartz slides were evaluated by comparison to those of idealized amphiphilic alpha-helical, beta-sheet, and disordered peptides. Dynorphin A(1-17) was mostly disordered, whereas beta-endorphin was alpha helical. Dynorphin model 1 had properties similar to those of dynorphin A(1-17) at these interfaces, but model 2 formed strongly amphiphilic beta sheets. In binding assays to mu-, delta-, and kappa-opioid receptors in guinea pig brain membranes, model 1 reproduced the high potency and selectivity of dynorphin A(1-17) for kappa receptors, and model 2 was only 3 times less potent and less selective for these receptors. Both peptide models retained the high, kappa-selective agonist activity of dynorphin A(1-17) in guinea pig ileum assays, and like dynorphin A(1-17), model 1 had little activity in the rat vas deferens assay. In view of the minimal homology of the modeled dynorphin structures, these studies support current models of membrane-catalyzed opioid ligand-receptor interactions and suggest a role for the amphiphilic alpha-helical and beta-strand structures in beta-endorphin and dynorphin A(1-17), respectively, in this process.