An unusual route to thermostability disclosed by the comparison of Thermus thermophilus and Escherichia coli inorganic pyrophosphatases.

The structures of Escherichia coli soluble inorganic pyrophosphatase (E-PPase) and Thermus thermophilus soluble inorganic pyrophosphatase (T-PPase) have been compared to find the basis for the superior thermostability of T-PPase. Both enzymes are D3 hexamers and crystallize in the same space group with very similar cell dimensions. Two rather small changes occur in the T-PPase monomer: a systematic removal of Ser residues and insertion of Arg residues, but only in the C-terminal part of the protein, and more long-range ion pairs from the C-terminal helix to the rest of the molecule. Apart from the first five residues, the three-dimensional structures of E-PPase and T-PPase monomers are very similar. The one striking difference, however, is in the oligomeric interactions. In comparison with an E-PPase monomer, each T-PPase monomer is skewed by about 1 A in the xy plane, is 0.3 A closer to the center of the hexamer in the z direction, and is rotated by approximately 7 degrees about its center of gravity. Consequently, there are a number of additional hydrogen bond and ionic interactions, many of which form an interlocking network that covers all of the oligomeric surfaces. The change can also be seen in local distortions of three small loops involved in the oligomeric interfaces. The complex rigid-body motion has the effect that the hexamer is more tightly packed in T-PPase: the amount of surface area buried upon oligomerization increases by 16%. The change is sufficiently large to account for all of the increased thermostability of T-PPase over E-PPase and further supports the idea that bacterial PPases, most active as hexamers or tetramers, achieve a large measure of their stabilization through oligomerization. Rigid-body motions of entire monomers to produce tighter oligomers may be yet another way in which proteins can be made thermophilic.     

Sulfolobus acidocaldarius inorganic pyrophosphatase: structure, thermostability, and effect of metal ion in an archael pyrophosphatase.

The first crystal structure of an inorganic pyrophosphatase (S-PPase) from an archaebacterium, the thermophile Sulfolobus acidocaldarius, has been solved by molecular replacement and refined to an R-factor of 19.7% at 2.7 A. S-PPase is a D3 homohexameric protein with one Mg2+ per active site in a position similar to, but not identical with, the first activating metal in mesophilic pyrophosphatases (PPase). In mesophilic PPases, Asp65, Asp70, and Asp102 coordinate the Mg2+, while only Asp65 and Asp102 do in S-PPase, and the Mg2+ moves by 0.7 A. S-PPase may therefore be deactivated at low temperature by mispositioning a key metal ion. The monomer S-PPase structure is very similar to that of Thermus thermophilus (T-PPase) and Escherichia coli (E-PPase), root-mean-square deviations around 1 A/Calpha. But the hexamer structures of S- and T-PPase are more tightly packed and more similar to each other than they are to that of E-PPase, as shown by the increase in surface area buried upon oligomerization. In T-PPase, Arg116 creates an interlocking ionic network to both twofold and threefold related monomers; S-PPase has hydrophilic interactions to threefold related monomers absent in both E- and T-PPase. In addition, the thermostable PPases have about 7% more hydrogen bonds per monomer than E-PPase, and, especially in S-PPase, additional ionic interactions anchor the C-terminus to the rest of the protein. Thermostability in PPases is thus due to subtle improvements in both monomer and oligomer interactions.     

Effects of active site mutations on the metal binding affinity, catalytic competence, and stability of the family II pyrophosphatase from Bacillus subtilis

Family II inorganic pyrophosphatases (PPases) have been recently found in a variety of bacteria. Their primary and tertiary structures differ from those of the well-known family I PPases, although both have a binuclear metal center directly involved in catalysis. Here, we examined the effects of mutating one Glu, four His, and five Asp residues forming or close to the metal center on Mn(2+) binding affinity, catalysis, oligomeric structure, and thermostability of the family II PPase from Bacillus subtilis (bsPPase). Mutations H9Q, D13E, D15E, and D75E in two metal-binding subsites caused profound (10(4)- to 10(6)-fold) reductions in the binding affinity for Mn(2+). Most of the mutations decreased k(cat) for MgPP(i) by 2-3 orders of magnitude when measured with Mn(2+) or Mg(2+) bound to the high-affinity subsite and Mg(2+) bound to both the low-affinity subsite and pyrophosphate. In the E78D variant, the k(cat) for the Mn-bound enzyme was decreased 120-fold, converting bsPPase from an Mn-specific to an Mg-specific enzyme. K(m) values were less affected by the mutations, and, interestingly, were decreased in most cases. Mutations of His(97) and His(98) residues, which lie near the subunit interface, greatly destabilized the bsPPase dimer, whereas most other mutations stabilized it. Mn(2+), in sharp contrast to Mg(2+), conferred high thermostability to wild-type bsPPase, although this effect was reduced by all of the mutations except D203E. These results indicate that family II PPases have a more integrated active site structure than family I PPases and are consequently more sensitive to conservative mutations.     

The extreme thermostable pyrophosphatase from Sulfolobus acidocaldarius: enzymatic and comparative biophysical characterization

Recombinant pyrophosphatase from the hyperthermophilic archaebacterium Sulfolobus acidocaldarius (S-PPase) has been heterologously expressed in Escherichia coli and could be purified in large quantities. S-PPase, previously described as a tetrameric enzyme, was shown to be a homohexameric protein that had catalytic activity with Mg2+ > Zn2+ > Co2+ > Mn2+ > Ni2+, Ca2+. CD and FTIR spectra demonstrate a similar overall fold for S-PPase and PPases from E. coli (E-PPase) and Thermus thermophilus (T-PPase). The relative proportions of secondary structure elements in S-PPase are close to those of a previously proposed model. S-PPase is extremely heat resistant. Even at 95 degrees C the half-life of catalytic activity is 2.5 h, which is dramatically increased in the presence of divalent cations. More than one Mg2+ per monomer is needed for catalysis, but no more than one Mg2+ per monomer is sufficient for thermal stabilization. The Tm values for S-PPase are 89 degrees C (+EDTA), 99 degrees C (+Mg2+), and >100 degrees C (+Mn2+), compared to 58 degrees C (+EDTA), 84 degrees C (+Mg2+), and 93 degrees C (+Mn2+) for E-PPase and 86 degrees C (+EDTA), 99 degrees C (+Mg2+), and 96 degrees C (+Mn2+) for T-PPase. The guanidium hydrochloride-induced unfolding follows an unknown mechanism with a biphasic kinetic and an unstable intermediate. Unfolding curves of the S-, E-, and T-PPase are independent of the method applied (CD spectroscopy and fluorescence) and show a sigmoidal and monophasic transition, indicating a change in global structure during unfolding, which can be described by a two-state process comprising dissociation and denaturation of the folded hexamer into six monomers. The respective DeltaGN-->D(25 degrees C) values of the three PPases vary from 220 to 290 kJ/mol for the overall process and are not significantly higher for the two thermophilic PPases. The stabilizing effect of Mg2+ DeltaDeltaG(25 degrees C) is 16 kJ/mol for E-PPase and 5.5-8 kJ/mol for S-PPase and T-PPase.     

Probing enzyme quaternary structure by combinatorial mutagenesis and selection

Genetic selection provides an effective way to obtain active catalysts from a diverse population of protein variants. We have used this tool to investigate the role of loop sequences in determining the quaternary structure of a domain-swapped enzyme. By inserting random loops of four to seven residues into a dimeric chorismate mutase and selecting for functional variants by genetic complementation, we have obtained and characterized both monomeric and hexameric enzymes that retain considerable catalytic activity. The low percentage of active proteins recovered from these selection experiments indicates that relatively few loop sequences permit a change in quaternary structure without affecting active site structure. The results of our experiments suggest further that protein stability can be an important driving force in the evolution of oligomeric proteins.     

Immunological mapping of fine molecular surface structures of citrate synthase enzymes from different cell types.

Citrate synthase (EC 4.1.3.7), which is present in all living organisms as a key enzyme in aerobic energy metabolism, is one of the most highly phylogenetically conserved enzymes known in terms of its primary and active site structure. However, in terms of other parameters such as in vitro stability, tolerance to changes in pH, degree of self-polymerization, etc., citrate synthases from different sources are markedly different. These divergences can be observed even between isoforms of the enzyme within the same species. Data documenting these diversities suggest that a high degree of difference in tertiary structures may occur. Therefore, the surface profiles of citrate synthase enzymes from yeast, pig, rat, tomato and Escherichia coli were investigated with immunological methods using monoclonal antibody families generated against either pig citrate synthase (alpha-PCS) or yeast citrate synthase-2 (alpha-YCS-2). A high degree of homology of enzyme epitopes was detected on the mitochondrial citrate synthases originating from yeast, tomato, pig and rat cells. Major differences were found between the hexameric citrate synthase originating from E. coli compared with those dimeric forms prepared from eukaryotic cells. Only modest similarities were detected between the highly homologous peroxisomal and mitochondrial yeast citrate synthases. Furthermore, a point mutation of one of the catalytic residues (H274R on recombinant pig and H313R on yeast enzyme) of mitochondrial citrate synthase (CS-1) resulted in a significant increase in immunological similarity with the peroxisomal isoenzyme (CS-2). These findings are discussed in terms of the possible mechanism of evolution of CS-2 in yeast.     

Crystal structure of yeast allantoicase reveals a repeated jelly roll motif

Allantoicase (EC 3.5.3.4) catalyzes the conversion of allantoate into ureidoglycolate and urea, one of the final steps in the degradation of purines to urea. The mechanism of most enzymes involved in this pathway, which has been known for a long time, is unknown. In this paper we describe the three-dimensional crystal structure of the yeast allantoicase determined at a resolution of 2.6 A by single anomalous diffraction. This constitutes the first structure for an enzyme of this pathway. The structure reveals a repeated jelly roll beta-sheet motif, also present in proteins of unrelated biochemical function. Allantoicase has a hexameric arrangement in the crystal (dimer of trimers). Analysis of the protein sequence against the structural data reveals the presence of two totally conserved surface patches, one on each jelly roll motif. The hexameric packing concentrates these patches into conserved pockets that probably constitute the active site.     

An unusual, His-dependent family I pyrophosphatase from Mycobacterium tuberculosis

Soluble inorganic pyrophosphatases (PPases) comprise two evolutionarily unrelated families (I and II). These two families have different specificities for metal cofactors, which is thought to be because of the fact that family II PPases have three active site histidines, whereas family I PPases have none. Here, we report the structural and functional characterization of a unique family I PPase from Mycobacterium tuberculosis (mtPPase) that has two His residues (His21 and His86) in the active site. The 1.3-A three-dimensional structure of mtPPase shows that His86 directly interacts with bound sulfate, which mimics the product phosphate. Otherwise, mtPPase is structurally very similar to the well studied family I hexameric PPase from Escherichia coli, although mtPPase lacks the intersubunit metal binding site found in E. coli PPase. The cofactor specificity of mtPPase resembles that of E. coli PPase in that it has high activity in the presence of Mg2+, but it differs from the E. coli enzyme and family II PPases because it has much lower activity in the presence of Mn2+ or Zn2+. Replacements of His21 and His86 in mtPPase with the residues found in the corresponding positions of E. coli PPase had either no effect on the Mg2+- and Mn2+-supported reactions (H86K) or reduced Mg2+-supported activity (H21K). However, both replacements markedly increased the Zn2+-supported activity of mtPPase (up to 11-fold). In the double mutant, Zn2+ was a 2.5-fold better cofactor than Mg2+. These results show that the His residues in mtPPase are not essential for catalysis, although they determine cofactor specificity.     

Evolutionary conservation of the active site of soluble inorganic pyrophosphatase.

Soluble inorganic pyrophosphatases (PPases) are essential enzymes that are important for controlling the cellular levels of inorganic pyrophosphate (PPi). Although prokaryotic and eukaryotic PPases differ substantially in amino acid sequence, recent evidence now demonstrates clearly that PPases throughout evolution show a remarkable level of conservation of both an extended active site structure, which has the character of a mini-mineral, and a catalytic mechanism. PPases require several (three or four) Mg2+ ions at the active site for activity and many of the 15-17 fully conserved active site residues are directly involved in the binding of metal ions. Each of the eight microscopic rate constants that has been evaluated for the PPases from both Escherichia coli and Saccharomyces cerevisiae is quite similar in magnitude for the two enzymes, supporting the notion of a conserved mechanism.     

Studies on the structure of yeast phosphofructokinase

In this paper, we describe an efficient procedure for the purification of yeast phosphofructokinase. This procedure eliminates any time delay and enables to obtain an enzyme with minimum proteolytic alterations. The molecular weights of the oligomeric enzyme and of its constitutive subunits were both evaluated by means of several independent methods. However, the accuracy of each measurement was not sufficient to discriminate between an hexameric and an octameric structure of the enzyme oligomer. On the other hand, crosslinking experiments demonstrated the octameric structure of yeast phosphofructokinase. Obviously, some methods of molecular weight determination have led to erroneous results. In particular, our experiments show that the reliability of molecular weight determinations performed by gel filtration of native proteins must be considered with caution.     

Structure of the arginine repressor from Bacillus stearothermophilus.

The arginine repressor (ArgR) is a hexameric DNA-binding protein that plays a multifunctional role in the bacterial cell. Here, we present the 2.5 A structure of apo-ArgR from Bacillus stearothermophilus and the 2.2 A structure of the hexameric ArgR oligomerization domain with bound arginine. This first view of intact ArgR reveals an approximately 32-symmetric hexamer of identical subunits, with six DNA-binding domains surrounding a central oligomeric core. The difference in quaternary organization of subunits in the arginine-bound and apo forms provides a possible explanation for poor operator binding by apo-ArgR and for high affinity binding in the presence of arginine.     

Crystal structure of a conserved hypothetical protein from Escherichia coli

The crystal structure of a conserved hypothetical protein from Escherichia coli has been determined using X-ray crystallography. The protein belongs to the Cluster of Orthologous Group COG1553 (National Center for Biotechnology Information database, NLM, NIH), for which there was no structural information available until now. Structural homology search with DALI algorism indicated that this protein has a new fold with no obvious similarity to those of other proteins with known three-dimensional structures. The protein quaternary structure consists of a dimer of trimers, which makes a characteristic cylinder shape. There is a large closed cavity with approximate dimensions of 16 Å × 16 Å × 20 Å in the center of the hexameric structure. Six putative active sites are positioned along the equatorial surface of the hexamer. There are several highly conserved residues including two possible functional cysteines in the putative active site. The possible molecular function of the protein is discussed.     

Structure of the bacteriophage lambda Ser/Thr protein phosphatase with sulfate ion bound in two coordination modes

The protein phosphatase encoded by bacteriophage lambda (lambda PP) belongs to a family of Ser/Thr phosphatases (Ser/Thr PPases) that includes the eukaryotic protein phosphatases 1 (PP1), 2A (PP2A), and 2B (calcineurin). These Ser/Thr PPases and the related purple acid phosphatases (PAPs) contain a conserved phosphoesterase sequence motif that binds a dinuclear metal center. The mechanisms of phosphoester hydrolysis by these enzymes are beginning to be unraveled. To utilize lambda PP more effectively as a model for probing the catalytic mechanism of the Ser/Thr PPases, we have determined its crystal structure to 2.15 A resolution. The overall fold resembles that of PP1 and calcineurin, including a conserved beta alpha beta alpha beta structure that comprises the phosphoesterase motif. Substrates and inhibitors probably bind in a narrow surface groove that houses the active site dinuclear Mn(II) center. The arrangement of metal ligands is similar to that in PP1, calcineurin, and PAP, and a bound sulfate ion is present in two novel coordination modes. In two of the three molecules in the crystallographic asymmetric unit, sulfate is coordinated to Mn2 in a monodentate, terminal fashion, and the two Mn(II) ions are bridged by a solvent molecule. Two additional solvent molecules are coordinated to Mn1. In the third molecule, the sulfate ion is triply coordinated to the metal center with one oxygen coordinated to both Mn(II) ions, one oxygen coordinated to Mn1, and one oxygen coordinated to Mn2. The sulfate in this coordination mode displaces the bridging ligand and one of the terminal solvent ligands. In both sulfate coordination modes, the sulfate ion is stabilized by hydrogen bonding interactions with conserved arginine residues, Arg 53 and Arg 162. The two different active site structures provide models for intermediates in phosphoester hydrolysis and suggest specific mechanistic roles for conserved residues.     

Transketolase: structure and mechanism of action

The structure and mechanism of action of transketolase are reviewed, with the primary emphasis laid on the baker's yeast enzyme. The oligomeric structure of transketolase, the interaction of the coenzyme with the apoenzyme and the role of phosphate groups in the substrate interaction with the protein have been studied. The role of essential groups of apotransketolase in the binding of the coenzyme, substrates as well as in the catalytic act are described. The peculiarities of formation of the enzyme active center are discussed.     

Cross-Linking study of cytochrome P450 1A2 in proteoliposomes

Proteoliposomes, containing cytochrome P450 1A2, were obtained by the cholate-dialysis technique. The effect of bifunctional cross-linking reagents on the purified hexameric cytochrome P450 1A2 in an aqueous medium and on the proteoliposomal P450 1A2 have been compared. Electrophoretic analysis of the modified proteins demonstrated the same oligomeric (hexameric) organization of the hemoprotein in each case.     

Crystal structure of Streptococcus mutans pyrophosphatase: a new fold for an old mechanism

BACKGROUND: Streptococcus mutans pyrophosphatase (Sm-PPase) is a member of a relatively uncommon but widely dispersed sequence family (family II) of inorganic pyrophosphatases. A structure will answer two main questions: is it structurally similar to the family I PPases, and is the mechanism similar? RESULTS: The first family II PPase structure, that of homodimeric Sm-PPase complexed with metal and sulfate ions, has been solved by X-ray crystallography at 2.2 A resolution. The tertiary fold of Sm-PPase consists of a 189 residue alpha/beta N-terminal domain and a 114 residue mixed beta sheet C-terminal domain and bears no resemblance to family I PPase, even though the arrangement of active site ligands and the residues that bind them shows significant similarity. The preference for Mn2+ over Mg2+ in family II PPases is explained by the histidine ligands and bidentate carboxylate coordination. The active site is located at the domain interface. The C-terminal domain is hinged to the N-terminal domain and exists in both closed and open conformations. CONCLUSIONS: The active site similiarities, including a water coordinated to two metal ions, suggest that the family II PPase mechanism is "analogous" (not "homologous") to that of family I PPases. This is a remarkable example of convergent evolution. The large change in C-terminal conformation suggests that domain closure might be the mechanism by which Sm-PPase achieves specificity for pyrophosphate over other polyphosphates.     

Metal cofactors play a dual role in Mycobacterium tuberculosis inorganic pyrophosphatase

Inorganic pyrophosphatase from Mycobacterium tuberculosis (Mt-PPase) is one of the possible targets for the rational design of anti-tuberculosis agents. In this paper, functional properties of this enzyme are characterized in the presence of the most effective activators--Mg2+ and Mn2+. Dissociation constants of Mt-PPase complexed with Mg2+ or Mn2+ are essentially similar to those of Escherichia coli PPase. Stability of a hexameric form of Mt-PPase has been characterized as a function of pH both for the metal-free enzyme and for Mg2+- or Mn2+-enzyme. Hexameric metal-free Mt-PPase has been shown to dissociate, forming monomers at pH below 4 or trimers at pH from 8 to 10. Mg2+ or Mn2+ shift the hexamer-trimer equilibrium found for the apo-Mt-PPase at pH 8-10 toward the hexameric form by stabilizing intertrimeric contacts. The pK(a) values have been determined for groups that control the observed hexamer-monomer (pK(a) 5.4), hexamer-trimer (pK(a) 7.5), and trimer-monomer (pK(a) 9.8) transitions. Our results demonstrate that due to the non-conservative amino acid residues His21 and His86 in the active site of Mt-PPase, substrate specificity of this enzyme, in contrast to other typical PPases, does not depend on the nature of the metal cofactor.     

The three-dimensional structure of an eukaryotic glutamine synthetase: functional implications of its oligomeric structure

The structure of the prokaryotic glutamine synthetases type I (GS-I), key enzymes in nitrogen metabolism, was determined several years ago by X-ray diffraction, and consists of a double hexameric ring. The structure of the eukaryotic GS from the plant Phaseolus vulgaris (Glutamine synthetase type II; GS-II) has now been determined at low-resolution using electron microscopy and image processing, and consists of an octamer composed of two tetramers placed back-to-back and rotated 90 degrees with respect to each other. The oligomeric structure possesses a twofold symmetry, very suggestive of each tetramer being composed of two dimers. This is reinforced by the fact that dimers are isolated as a stable albeit non-functional species during the purification procedure. Given the fact that the active site of all types of GS is formed by highly conserved residues located in the interface of two interacting monomers, the geometry of the reconstructed tetramer suggests that it only contains two functional active sites, i.e., an active site per dimer. This is supported by biochemical data, which reveal that while the octamer binds eight ATP molecules, it only binds four molecules of the transition state analogue and GS inhibitor methionine-(S)-sulfoximine-P (MetSox-P). All this suggests for the GS-II enzyme an oligomeric structure containing four active sites and four possible regulatory sites, which might point to a complex regulatory behavior.     

A hierarchic approach to the design of hexameric helical barrels

The design of large macromolecular assemblies is an endeavor with implications for protein engineering as well as nanotechnology. A hierarchic approach was used to design an antiparallel hexameric, tubular assembly of helices. In previous studies, a domain-swapped, dimeric three-helix bundle was designed from first principles. In the crystal lattice, three dimers associate around a 3-fold rotational axis to form a hexameric assembly. Although this hexameric assembly was not observed in solution, it was possible to stabilize its formation by changing three polar residues per monomer to hydrophobic (two Phe and one Trp) residues. Molecular models based on the crystallographic coordinates of DSD (PDB accession code 1G6U) show that these side-chains pack in the central cavity (the "supercore") of the hexameric bundle. Analytical ultracentrifugation, fluorescence spectroscopy, CD spectroscopy, and guanidine-HCl denaturation were used to determine the assembly of the hexamer. To probe the requirements for stabilizing the hexamer, we systematically varied the polarity and steric bulk of one of the Phe residues in the supercore of the hexamer. Depending on the nature of this side-chain, it is possible to modulate the stability of the hexamer in a predictable manner. This family of hexameric proteins may provide a useful framework for the construction of proteins that change their oligomeric states in response to binding of small molecules.     

Nickel superoxide dismutase: structural and functional roles of Cys2 and Cys6

Nickel superoxide dismutase (NiSOD) is unique among the family of superoxide dismutase enzymes in that it coordinates Cys residues (Cys2 and Cys6) to the redox-active metal center and exhibits a hexameric quaternary structure. To assess the role of the Cys residues with respect to the activity of NiSOD, mutations of Cys2 and Cys6 to Ser (C2S-NiSOD, C6S-NiSOD, and C2S/C6S-NiSOD) were carried out. The resulting mutants do not catalyze the disproportionation of superoxide, but retain the hexameric structure found for wild-type NiSOD and bind Ni(II) ions in a 1:1 stoichiometry. X-ray absorption spectroscopic studies of the Cys mutants revealed that the nickel active-site structure for each mutant resembles that of C2S/C6S-NiSOD and demonstrate that mutation of either Cys2 or Cys6 inhibits coordination of the remaining Cys residue. Mutation of one or both Cys residue(s) in NiSOD induces the conversion of the low-spin Ni(II) site in the native enzyme to a high-spin Ni(II) center in the mutants. This result indicates that coordination of both Cys residues is required to generate the native low-spin configurations and maintain catalytic activity. Analysis of the quaternary structure of the Cys mutants by differential scanning calorimetry, mass spectrometry, and size-exclusion chromatography revealed that the Cys ligands, particularly Cys2, are also important for stabilizing the hexameric quaternary structure of the native enzyme.