Conformational studies of plasminogen activator inhibitor type 1 by fluorescence spectroscopy. Analysis of the reactive centre of inhibitory and substrate forms, and of their respective reactive-centre cleaved forms.

The inhibitors that belong to the serpin family are suicide inhibitors that control the major proteolytic cascades in eucaryotes. Recent data suggest that serpin inhibition involves reactive centre cleavage followed by loop insertion, whereby the covalently linked protease is translocated away from the initial docking site. However under certain circumstances, serpins can also be cleaved like a substrate by target proteases. In this report we have studied the conformation of the reactive centre of plasminogen activator inhibitor type 1 (PAI-1) mutants with inhibitory and substrate properties. The polarized steady-state and time-resolved fluorescence anisotropies were determined for BODIPY(R) probes attached to the P1' and P3 positions of the substrate and active forms of PAI-1. The fluorescence data suggest an extended orientational freedom of the probe in the reactive centre of the substrate form as compared to the active form, revealing that the conformation of the reactive centres differ. The intramolecular distance between the P1' and P3 residues in reactive centre cleaved inhibitory and substrate mutants of PAI-1, were determined by using the donor-donor energy migration (DDEM) method. The distances found were 57+/-4 A and 63+/-3 A, respectively, which is comparable to the distance obtained between the same residues when PAI-1 is in complex with urokinase-type plasminogen activator (uPA). Following reactive centre cleavage, our data suggest that the core of the inhibitory and substrate forms possesses an inherited ability of fully inserting the reactive centre loop into beta-sheet A. In the inhibitory forms of PAI-1 forming serpin-protease complexes, this ability leads to a translocation of the cognate protease from one pole of the inhibitor to the opposite one.     

The serpin inhibitory mechanism is critically dependent on the length of the reactive center loop

The recent crystallographic structure of a serpin-protease complex revealed that protease inactivation results from a disruption of the catalytic site architecture caused by the displacement of the catalytic serine. We hypothesize that inhibition depends on the length of the N-terminal portion of the reactive center loop, to which the active serine is covalently attached. To test this, alpha(1)-antitrypsin Pittsburgh variants were prepared with lengthened and shortened reactive center loops. The rates of inhibition of factor Xa and of complex dissociation were measured. The addition of one residue reduced the stability of the complex more than 200,000-fold, and the addition of two residues reduced it by more than 1,000,000-fold, whereas the deletion of one or two residues lowered the efficiency of inhibition and increased the stability of the complex (2-fold). The deletion of more than two residues completely converted the serpin into a substrate. Similar results were obtained for the alpha(1)-antitrypsin variants with thrombin and for PAI-1 and PAI-2 with their common target tissue plasminogen activator. We conclude that the length of the serpin reactive center loop is critical for its mechanism of inhibition and is precisely regulated to balance the efficiency of inhibition and stability of the final complex.     

Rational Design of Complex Formation between Plasminogen Activator Inhibitor-1 and Its Target Proteinases

Considerable progress in understanding the mechanism of inhibition of proteinases by serpins has been obtained from different biochemical studies. These studies reveal that stable serpin/proteinase complex formation involves insertion of the reactive-site loop of the serpin and occurs at the acyl-enzyme stage. Even though no three-dimensional structure of a serpin/proteinase complex is resolved, structural information is available on some of the individual compounds. Molecular modeling techniques combined with recently acquired biochemical/biophysical data were used to provide insight into the stable complex formation between plasminogen activator inhibitor-1 (PAI-1) and the target proteinases: tissue-type plasminogen activator, urokinase-type plasminogen activator, and thrombin. This study reveals that PAI-1 initially interacts with its target proteinase when its reactive-site loop is solvent exposed and thereby accessible for the proteinase. Stable complex formation, however, involves the insertion of the reactive-site loop up to P7 and results in a tight binding geometry between PAI-1 and its target proteinase. The influence of different biologically relevant molecules on PAI-1/proteinase complex formation and the differences in inhibition rate constants observed for the different proteinases can be explained from these models.     

Plasminogen activator inhibitor-2 is highly tolerant to P8 residue substitution--implications for serpin mechanistic model and prediction of nsSNP activities

The serine protease inhibitor (serpin) superfamily is involved in a wide range of cellular processes including fibrinolysis, angiogenesis, apoptosis, inflammation, metastasis and viral pathogenesis. Here, we investigate the unique mousetrap inhibition mechanism of serpins through saturation mutagenesis of the P8 residue for a typical family member, plasminogen activator inhibitor-2 (PAI-2). A number of studies have proposed an important role for the P8 residue in the efficient insertion and stabilisation of the cleaved reactive centre loop (RCL), which is a key event in the serpin inhibitory mechanism. The importance of this residue for inhibition of the PAI-2 protease target urinary plasminogen activator (urokinase, uPA) is confirmed, although a high degree of tolerance to P8 substitution is observed. Out of 19 possible PAI-2 P8 mutants, 16 display inhibitory activities within an order of magnitude of the wild-type P8 Thr species. Crystal structures of complexes between PAI-2 and RCL-mimicking peptides with P8 Met or Asp mutations are determined, and structural comparison with the wild-type complex substantiates the ability of the S8 pocket to accommodate disparate side-chains. These data indicate that the identity of the P8 residue is not a determinant of efficient RCL insertion, and provide further evidence for functional plasticity of key residues within enzyme structures. Poor correlation of observed PAI-2 P8 mutant activities with a range of physicochemical, evolutionary and thermodynamic predictive indices highlights the practical limitations of existing approaches to predicting the molecular phenotype of protein variants.     

Enthalpy measurement using calorimetry shows a significant difference in potential energy between the active and latent conformations of PAI-1

A central feature of the serpin inhibition mechanism is insertion of the reactive center loop into the central beta-sheet (beta-sheet A). This insertion also occurs when the reactive center loop is cleaved without protease inhibition. Using this effect, we have measured the enthalpy (DeltaH) of loop cleavage and insertion for plasminogen activator inhibitor 1 (PAI-1) as -38 kcal/mol. Because loop insertion can be blocked by incorporating a peptide into the central beta-sheet, it was possible to assign -7 kcal/mol to loop cleavage and -31 kcal/mol to loop insertion. These values are lower than values reported for the serpins alpha 1 -proteinase inhibitor and antithrombin of -53 to -63 kcal/mol, respectively, for loop insertion with negligible enthalpy for loop cleavage. A free energy difference of -9 kcal/mol has been reported between the active and spontaneously loop inserted "latent forms" of PAI-1, which is significantly smaller in magnitude than the -31 kcal/mol of enthalpy we measured for loop insertion. Because the enthalpy should relate closely to those regions of PAI-1 that have moved to lower potential energy, a difference distance matrix is presented that identifies regions of PAI-1 that move during loop insertion.     

A concerted structural transition in the plasminogen activator inhibitor-1 mechanism of inhibition

The inhibition mechanism of serpins requires a change in structure to entrap the target proteinase as a stable acyl-enzyme complex. Although it has generally been assumed that reactive center loop insertion and associated conformational change proceeds in a concerted manner, this has not been demonstrated directly. Through the substitution of tryptophan with 7-azatryptophan and an analysis of transient reaction kinetics, we have described the formation of an inhibited serpin-proteinase complex as a single concerted transition of the serpin structure. Replacement of the four tryptophans of plasminogen activator inhibitor type-1 (PAI-1) with the spectrally unique analogue 7-azatryptophan permitted observations of conformational changes in the serpin but not those of the proteinase. Formation of covalent acyl-enzyme complexes, but not noncovalent Michaelis complexes, with tissue-type plasminogen activator (t-PA) or urokinase (u-PA) resulted in rapid decreases of fluorescence coinciding with insertion of the reactive center loop and expansion of beta-sheet A. Insertion of an octapeptide consisting of the P14-P7 residues of the reactive center loop into beta-sheet A produced the same conformational change in serpin structure measured by 7-azatryptophan fluorescence, suggesting that introduction of the proximal loop residues induces the structural rearrangement of the serpin molecule. The atom specific modification of the tryptophan indole rings through analogue substitution produced a proteinase specific effect on function. The reduced inhibitory activity of PAI-1 against t-PA but not u-PA suggested that the mechanism of loop insertion is sensitive to the intramolecular interactions of one or more tryptophan residues.     

The crystal structure of plasminogen activator inhibitor 2 at 2.0 A resolution: implications for serpin function.

BACKGROUND: Plasminogen activator inhibitor 2 (PAI-2) is a member of the serpin family of protease inhibitors that function via a dramatic structural change from a native, stressed state to a relaxed form. This transition is mediated by a segment of the serpin termed the reactive centre loop (RCL); the RCL is cleaved on interaction with the protease and becomes inserted into betasheet A of the serpin. Major questions remain as to what factors facilitate this transition and how they relate to protease inhibition. RESULTS: The crystal structure of a mutant form of human PAI-2 in the stressed state has been determined at 2.0 A resolution. The RCL is completely disordered in the structure. An examination of polar residues that are highly conserved across all serpins identifies functionally important regions. A buried polar cluster beneath betasheet A (the so-called 'shutter' region) is found to stabilise both the stressed and relaxed forms via a rearrangement of hydrogen bonds. CONCLUSIONS: A statistical analysis of interstrand interactions indicated that the shutter region can be used to discriminate between inhibitory and non-inhibitory serpins. This analysis implied that insertion of the RCL into betasheet A up to residue P8 is important for protease inhibition and hence the structure of the complex formed between the serpin and the target protease.     

Understanding the specificity of serpin–protease complexes through interface analysis

Serpins such as antithrombin, heparin cofactor II, plasminogen activator inhibitor, antitrypsin, antichymotrypsin, and neuroserpin are involved in important biological processes by inhibiting specific serine proteases. Initially, the protease recognizes the mobile reactive loop of the serpin eliciting conformational changes, where the cleaved loop together with the protease inserts into β-sheet A, translocating the protease to the opposite side of inhibitor leading to its inactivation. Serpin interaction with proteases is governed mainly by the reactive center loop residues (RCL). However, in some inhibitory serpins, exosite residues apart from RCL have been shown to confer protease specificity. Further, this forms the basis of multi-specificity of some serpins, but the residues and their dimension at interface in serpin-protease complexes remain elusive. Here, we present a comprehensive structural analysis of the serpin-protease interfaces using bio COmplexes COntact MAPS (COCOMAPS), PRotein Interface Conservation and Energetics (PRICE), and ProFace programs. We have carried out interface, burial, and evolutionary analysis of different serpin-protease complexes. Among the studied complexes, non-inhibitory serpins exhibit larger interface region with greater number of residue involvement as compared to the inhibitory serpins. On comparing the multi-specific serpins (antithrombin and antitrypsin), a difference in the interface area and residue number was observed, suggestive of a differential mechanism of action of these serpins in regulating their different target proteases. Further, detailed study of these multi-specific serpins listed few essential residues (common in all the complexes) and certain specificity (unique to each complex) determining residues at their interfaces. Structural mapping of interface residues suggested that individual patches with evolutionary conserved residues in specific serpins determine their specificity towards a particular protease.     

The reactive-center loop of active PAI-1 is folded close to the protein core and can be partially inserted

Plasminogen activator inhibitor 1 (PAI-1) is the main inhibitor of plasminogen activators and plays an important role in many pathophysiological processes. Like other members of the serpin family, PAI-1 has a reactive center consisting of a mobile loop (RCL) with P1 and P1' residues acting as a "bait" for cognate protease. In contrast to the other serpins, PAI-1 loses activity by spontaneous conversion to an inactive latent form. This involves full insertion of the RCL into beta-sheet A. To search for molecular determinants that could be responsible for conversion of PAI-1 to the latent form, we studied the conformation of the RCL in active PAI-1 in solution. Intramolecular distance measurements by donor-donor energy migration and probe quenching methods reveal that the RCL is located much closer to the core of PAI-1 than has been suggested by the recently resolved X-ray structures of stable PAI-1 mutants. Disulfide bonds can be formed in double-cysteine mutants with substitutions at positions P11 or P13 of the RCL and neighboring residues in beta-sheet A. This suggests that the RCL may be preinserted up to residue P13 in active PAI-1, and possibly even to residue P11. We propose that the close proximity of the RCL to the protein core, and the ability of the loop to preinsert into beta-sheet A is a possible reason for PAI-1 being able to convert spontaneously to its latent form.     

Epitope mapping for four monoclonal antibodies against human plasminogen activator inhibitor type-1: implications for antibody-mediated PAI-1-neutralization and vitronectin-binding.

The inhibitory mechanism of serine proteinase inhibitors of the serpin family is based on their unique conformational flexibility. The formation of a stable proteinase-serpin complex implies insertion of the reactive centre loop of the serpin into the large central beta-sheet A and a shift in the relative positions of two groups of secondary structure elements, the smaller one including alpha-helix F. In order to elucidate this mechanism, we have used phage-display and alanine scanning mutagenesis to map the epitopes for four monoclonal antibodies against alpha-helix F and its flanking region in the serpin plasminogen activator inhibitor-1 (PAI-1). One of these is known to inhibit the reaction between PAI-1 and its target proteinases, an effect that is potentiated by vitronectin, a physiological carrier protein for PAI-1. When combined with the effects these antibodies have on PAI-1 activity, our epitope mapping points to the mobility of amino-acid residues in alpha-helix F and the loop connecting alpha-helix F and beta-strand 3A as being important for the inhibitory function of PAI-1. Although all antibodies reduced the affinity of PAI-1 for vitronectin, the potentiating effect of vitronectin on antibody-induced PAI-1 neutralization is based on formation of a ternary complex between antibody, PAI-1 and vitronectin, in which PAI-1 is maintained in a state behaving as a substrate for plasminogen activators. These results thus provide new details about serpin conformational changes and the regulation of PAI-1 by vitronectin and contribute to the necessary basis for rational design of drugs neutralizing PAI-1 in cancer and cardiovascular diseases.     

A serpin-induced extensive proteolytic susceptibility of urokinase-type plasminogen activator implicates distortion of the proteinase substrate-binding pocket and oxyanion hole in the serpin inhibitory mechanism.

The formation of stable complexes between serpins and their target serine proteinases indicates formation of an ester bond between the proteinase active-site serine and the serpin P1 residue [Egelund, R., Rodenburg, K.W., Andreasen, P.A., Rasmussen, M.S., Guldberg, R.E. & Petersen, T.E. (1998) Biochemistry 37, 6375-6379]. An important question concerning serpin inhibition is the contrast between the stability of the ester bond in the complex and the rapid hydrolysis of the acyl-enzyme intermediate in general serine proteinase-catalysed peptide bond hydrolysis. To answer this question, we used limited proteolysis to detect conformational differences between free urokinase-type plasminogen activator (uPA) and uPA in complex with plasminogen activator inhibitor-1 (PAI-1). Whereas the catalytic domain of free uPA, pro-uPA, uPA in complex with non-serpin inhibitors and anhydro-uPA in a non-covalent complex with PAI-1 was resistant to proteolysis, the catalytic domain of PAI-1-complexed uPA was susceptible to proteolysis. The cleavage sites for four different proteinases were localized in specific areas of the C-terminal beta-barrel of the catalytic domain of uPA, providing evidence that the serpin inhibitory mechanism involves a serpin-induced massive rearrangement of the proteinase active site, including the specificity pocket, the oxyanion hole, and main-chain binding area, rendering the proteinase unable to complete the normal hydrolysis of the acyl-enzyme intermediate. The distorted region includes the so-called activation domain, also known to change conformation on zymogen activation.     

Mutational analysis of plasminogen activator inhibitor-1.

The serpin plasminogen activator inhibitor-1 (PAI-1) is a fast and specific inhibitor of the plasminogen activating serine proteases tissue-type and urokinase-type plasminogen activator and, as such, an important regulator in turnover of extracellular matrix and in fibrinolysis. PAI-1 spontaneously loses its antiproteolytic activity by inserting its reactive centre loop (RCL) as strand 4 in beta-sheet A, thereby converting to the so-called latent state. We have investigated the importance of the amino acid sequence of alpha-helix F (hF) and the connecting loop to s3A (hF/s3A-loop) for the rate of latency transition. We grafted regions of the hF/s3A-loop from antithrombin III and alpha1-protease inhibitor onto PAI-1, creating eight variants, and found that one of these reversions towards the serpin consensus decreased the rate of latency transition. We prepared 28 PAI-1 variants with individual residues in hF and beta-sheet A replaced by an alanine. We found that mutating serpin consensus residues always had functional consequences whereas mutating nonconserved residues only had so in one case. Two variants had low but stable inhibitory activity and a pronounced tendency towards substrate behaviour, suggesting that insertion of the RCL is held back during latency transition as well as during complex formation with target proteases. The data presented identify new determinants of PAI-1 latency transition and provide general insight into the characteristic loop-sheet interactions in serpins.     

Different structural requirements for plasminogen activator inhibitor 1 (PAI-1) during latency transition and proteinase inhibition as evidenced by phage-displayed hypermutated PAI-1 libraries

Plasminogen activator inhibitor type 1 (PAI-1) is a member of the serine protease inhibitor (serpin) superfamily. Its highly mobile reactive-center loop (RCL) is thought to account for both the rapid inhibition of tissue-type plasminogen activator (t-PA), and the rapid and spontaneous transition of the unstable, active form of PAI-1 into a stable, inactive (latent) conformation (t(1/2) at 37 degrees C, 2.2 hours). We determined the amino acid residues responsible for the inherent instability of PAI-1, to assess whether these properties are independent and, consequently, whether the structural basis for inhibition and latency transition is different. For that purpose, a hypermutated PAI-1 library that is displayed on phage was pre-incubated for increasing periods (20 to 72 hours) at 37 degrees C, prior to a stringent selection for rapid t-PA binding. Accordingly, four rounds of phage-display selection resulted in the isolation of a stable PAI-1 variant (st-44: t(1/2) 450 hours) with 11 amino acid mutations. Backcrossing by DNA shuffling of this stable mutant with wt PAI-1 was performed to eliminate non-contributing mutations. It was shown that the combination of mutations at positions 50, 56, 61, 70, 94, 150, 222, 223, 264 and 331 increases the half-life of PAI-1 245-fold. Furthermore, within the limits of detection the stable mutants isolated are functionally indistinguishable from wild-type PAI-1 with respect to the rate of inhibition of t-PA, cleavage by t-PA, and binding to vitronectin. These stabilizing mutations constitute largely reversions to the stable "serpin consensus sequence" and are located in areas implicated in PAI-1 stability (e.g. the vitronectin-binding domain and the proximal hinge). Collectively, our data provide evidence that the structural requirements for PAI-1 loop insertion during latency transition and target proteinase inhibition can be separated.     

Plasminogen activator inhibitors--a review

Plasminogen activator inhibitors (PAIs) are important modulators of the activity of plasminogen activators (PAs). Several inhibitors, all belonging to the serpin family of proteins, have been implicated in PA inhibition. In order of reaction rate constants these are PAI-1, PAI-2, protease nexin and PAI-3. This review gives an overview of the physicochemical characteristics of these inhibitors as well as a comparison of their primary structure with each other and with other members of the serpin family of proteins.     

The conversion of active to latent plasminogen activator inhibitor-1 is an energetically silent event

PAI-1 is a proteinase inhibitor, which plays a key role in the regulation of fibrinolysis. It belongs to the serpins, a family of proteins that behave either as proteinase inhibitors or proteinase substrates, both reactions involving limited proteolysis of the reactive center loop and insertion of part of this loop into beta-sheet A. Titration calorimetry shows that the inhibition of tissue-type plasminogen and pancreatic trypsin are exothermic reactions with DeltaH = -20.3, and -22.5 kcal.mol(-1), respectively. The Pseudomonas aeruginosa elastase-catalyzed reactive center loop cleavage and inactivation of the inhibitor is also exothermic (DeltaH = -38.9 kcal.mol(-1)). The bacterial elastase also hydrolyses peptide-bound PAI-1 in which acetyl-TVASSSTA, the octapeptide corresponding to the P(14)-P(7) sequence of the reactive center loop is inserted into beta-sheet A of the serpin with DeltaH = -4.0 kcal.mol(-1). In contrast, DeltaH = 0 for the spontaneous conversion of the metastable active PAI-1 molecule into its thermodynamically stable inactive (latent) conformer although this conversion also involves loop/sheet insertion. We conclude that the active to latent transition of PAI-1 is an entirely entropy-driven phenomenon.     

Crystal structure of the complex of plasminogen activator inhibitor 2 with a peptide mimicking the reactive center loop

The structure of the serpin, plasminogen activator inhibitor type-2 (PAI-2), in a complex with a peptide mimicking its reactive center loop (RCL) has been determined at 1.6-A resolution. The structure shows the relaxed state serpin structure with a prominent six-stranded beta-sheet. Clear electron density is seen for all residues in the peptide. The P1 residue of the peptide binds to a well defined pocket at the base of PAI-2 that may be important in determining the specificity of protease inhibition. The stressed-to-relaxed state (S --> R) transition in PAI-2 can be modeled as the relative motion between a quasirigid core domain and a smaller segment comprising helix hF and beta-strands s1A, s2A, and s3A. A comparison of the Ramachandran plots of the stressed and relaxed state PAI-2 structures reveals the location of several hinge regions connecting these two domains. The hinge regions cluster in three locations on the structure, ensuring a cooperative S --> R transition. We hypothesize that the hinge formed by the conserved Gly(206) on beta-strand s3A in the breach region of PAI-2 effects the S --> R transition by altering its backbone torsion angles. This torsional change is due to the binding of the P14 threonine of the RCL to the open breach region of PAI-2.     

Protein movement during complex-formation between tissue plasminogen activator and plasminogen activator inhibitor-1

Plasminogen activator inhibitor-1 (PAI-1) rapidly inactivates tissue plasminogen activator (tPA). After initial binding and cleavage of the reactive-centre loop of PAI-1, this complex is believed to undergo a major rearrangement. Using surface plasmon resonance and SDS-PAGE, we have studied the influence of a panel of monoclonal antibodies on the reaction leading to the final covalent complex. On the basis of these data, we suggest the mechanisms for the action of different classes of inhibitory antibodies. We propose that the antibodies which convert PAI-1 into a substrate for tPA do this by means of preventing the conversion of the initial PAI-1/tPA complex into the final complex by sterical intervention. Moreover, the localisation of the binding epitopes on free PAI-1, as well as on the PAI-1/tPA complex, suggests that tPA in the final complex cannot be located near helices E and F, as has previously been proposed.     

The contribution of the exosite residues of plasminogen activator inhibitor-1 to proteinase inhibition

The binding of plasminogen activator inhibitor-1 (PAI-1) to serine proteinases, such as tissue-type plasminogen activator (tPA) and urokinase-type plasminogen activator (uPA), is mediated by the exosite interactions between the surface-exposed variable region-1, or 37-loop, of the proteinase and the distal reactive center loop (RCL) of PAI-1. Although the contribution of such interactions to the inhibitory activity of PAI-1 has been established, the specific mechanistic steps affected by interactions at the distal RCL remain unknown. We have used protein engineering, stopped-flow fluorimetry, and rapid acid quenching techniques to elucidate the role of exosite interactions in the neutralization of tPA, uPA, and beta-trypsin by PAI-1. Alanine substitutions at the distal P4' (Glu-350) and P5' (Glu-351) residues of PAI-1 reduced the rates of Michaelis complex formation (k(a)) and overall inhibition (k(app)) with tPA by 13.4- and 4.7-fold, respectively, whereas the rate of loop insertion or final acyl-enzyme formation (k(lim)) increased by 3.3-fold. The effects of double mutations on k(a), k(lim), and k(app) were small with uPA and nonexistent with beta-trypsin. We provide the first kinetic evidence that the removal of exosite interactions significantly alters the formation of the noncovalent Michaelis complex, facilitating the release of the primed side of the distal loop from the active-site pocket of tPA and the subsequent insertion of the cleaved reactive center loop into beta-sheet A. Moreover, mutational analysis indicates that the P5' residue contributes more to the mechanism of tPA inhibition, notably by promoting the formation of a final Michaelis complex.     

Modulation of serpin reaction through stabilization of transient intermediate by ligands bound to alpha-helix F

Mechanism-based inhibition of proteinases by serpins involves enzyme acylation and fast insertion of the reactive center loop (RCL) into the central beta-sheet of the serpin, resulting in mechanical inactivation of the proteinase. We examined the effects of ligands specific to alpha-helix F (alphaHF) of plasminogen activator inhibitor-1 (PAI-1) on the stoichiometry of inhibition (SI) and limiting rate constant (k(lim)) of RCL insertion for reactions with beta-trypsin, tissue-type plasminogen activator (tPA), and urokinase. The somatomedin B domain of vitronectin (SMBD) did not affect SI for any proteinase or k(lim) for tPA but decreased the k(lim) for beta-trypsin. In contrast to SMBD, monoclonal antibodies MA-55F4C12 and MA-33H1F7, the epitopes of which are located at the opposite side of alphaHF, decreased k(lim) and increased SI for every enzyme. These effects were enhanced in the presence of SMBD. RCL insertion for beta-trypsin and tPA is limited by different subsequent steps of PAI-1 mechanism as follows: enzyme acylation and formation of a loop-displaced acyl complex (LDA), respectively. Stabilization of LDA through the disruption of the exosite interactions between PAI-1 and tPA induced an increase in the k(lim) but did not affect the SI. Thus it is unlikely that LDA contributes significantly to the outcome of the serpin reaction. These results demonstrate that the rate of RCL insertion is not necessarily correlated with SI and indicate that an intermediate, different from LDA, which forms during the late steps of PAI-1 mechanism, and could be stabilized by ligands specific to alphaHF, controls bifurcation between the inhibitory and the substrate pathways.     

Accelerated conversion of human plasminogen activator inhibitor-1 to its latent form by antibody binding.

The serpin plasminogen activator inhibitor-1 (PAI-1) slowly converts to an inactive latent form by inserting a major part of its reactive center loop (RCL) into its beta-sheet A. A murine monoclonal antibody (MA-33B8), raised against the human plasminogen activator (tPA).PAI-1 complex, rapidly inactivates PAI-1. Results presented here indicate that MA-33B8 induces acceleration of the active-to-latent conversion. The antibody-induced inactivation of PAI-1 labeled with the fluorescent probe N, N'-dimethyl-N-(acetyl)-N'-(7-nitrobenz-2-oxa-1,3-diazol-4-yl) ethylene diamine (NBD) at P9 in the RCL caused a fluorescence enhancement and shift identical to those accompanying the spontaneous conversion of the P9.NBD PAI-1 to the latent form. Like latent PAI-1, antibody-inactivated PAI-1 was protected from cleavage by elastase. The rate constants for MA-33B8 binding, measured by NBD fluorescence or inactivation, were similar (1.3-1.8 x 10(4) M-1 s-1), resulting in a 4000-fold faster inactivation at 4.2 microM antibody binding sites. The apparent antibody binding rate constant, at least 1000 times slower than one limited by diffusion, indicates that exposure of its epitope depends on an unfavorable equilibrium of PAI-1. Our observations are consistent with this idea and suggest that the equilibrium involves partial insertion of the RCL into sheet A: latent, RCL-cleaved, and tPA-complexed PAI-1, which are inactive loop-inserted forms, bound much faster than active PAI-1 to MA-33B8, whereas two loop-extracted forms of PAI-1, modified to prevent loop insertion, did not bind or bound much more weakly to the antibody.