Nitrogen and harvest management of Conservation Reserve Program (CRP) grassland for sustainable biomass feedstock production

The Biomass Regional Feedstock Partnership has identified grasslands planted under the Conservation Reserve Program (CRP) as a potential source for herbaceous bioenergy feedstock. The goal of this project is to assess the yield potential of CRP grasslands across diverse regions. Consistent with that goal, the objective of this project was to establish yield potential and quality parameters for several different CRP grasslands, representative of different growing environments. Standard field scale agricultural practices were used as management guidelines at each location. The test locations were identified and established based on known regions containing concentrated tracts of CRP grassland and represented variable climatic parameters and production histories. Biomass production potential for CRP land dominated by either warm‐ or cool‐season grass mixtures in each location was evaluated over the course of three growing seasons (2008, 2009, and 2010). Specifically, a mixture of warm‐season perennial grasses was evaluated in North Dakota, Kansas, and Oklahoma, while a cool‐season mixture was evaluated in Montana, Georgia, and Missouri. Maximum biomass yields for the three warm‐season CRP sites ranged from 4.0 to 7.2 Mg ha^?1 and for the three cool‐season CRP sites 3.4–6.0 Mg ha^?1. Our results demonstrate that CRP grassland has potential as a bioenergy feedstock resource if the appropriate management practices are followed.     

Farm-Scale Cost of Producing Perennial Energy Cane as a Biofuel Feedstock

Energy cane varieties are high-fiber sugarcane clones which represent a promising feedstock in the production of alternative biofuels and biobased products. This study explored the crop establishment and whole farm production costs of growing energy cane as a biofuel feedstock in the southeastern USA. More specifically, total production costs on a feedstock dry matter biomass basis were estimated for five perennial energy cane varieties over alternative crop cycle lengths. Variable production costs for energy cane production were estimated to be in the $63 to $76 Mg^?1 range of biomass dry matter for crop cycles through harvest of fourth through sixth stubble crops. Total production costs, including charges for fixed equipment costs, general farm overhead, and land rent, were estimated to range between $105 and $127 Mg^?1 of feedstock biomass dry matter material.     

Impact of warm‐season grass management on feedstock production on marginal farmland in Central Illinois

The production of dedicated energy crops on marginally productive cropland is projected to play an important role in reaching the US Billion Ton goal. This study aimed to evaluate warm‐season grasses for biomass production potential under different harvest timings (summer [H1], after killing frost [H2], or alternating between two [H3]) and nitrogen (N) fertilizer rates (0, 56, and 112 kg N/ha) on a wet marginal land across multiple production years. Six feedstocks were evaluated including Miscanthus x giganteus, two switchgrass cultivars (Panicum virgatum L.), prairie cordgrass (Spartina pectinata Link), and two polycultures including a mixture of big bluestem (Andropogon gerardii Vitman), indiangrass (Sorghastrum nutans), and sideoats grama (Bouteloua curtipendula [Michx.] Torr.), and a mixture of big bluestem and prairie cordgrass. Across four production years, harvest timing and feedstock type played an important role in biomass production. Miscanthus x giganteus produced the greatest biomass (18.7 Mg/ha), followed by the switchgrass cultivar “Liberty” (14.7 Mg/ha). Harvest in H1 tended to increase yield irrespective of feedstock; the exception being M. x giganteus that had significantly lower biomass when harvested in H1 when compared to H2 and H3. The advantage H1 harvest had over H2 for all feedstocks declined over time, suggesting H2 or H3 would provide greater and more sustainable biomass production for the observed feedstocks. The N application rate played an important role mainly for M. x giganteus where 112 kg N/ha yielded more biomass than no N. Other feedstocks occasionally showed a slight, but statistically insignificant increase in biomass yield with increasing N rate. This study showed the potential of producing feedstocks for bioenergy on wet marginal land; however, more research on tissue and soil nutrient dynamics under different N rates and harvest regimes will be important in understanding stand longevity for feedstocks grown under these conditions.     

Farm-Scale Production Cost of Switchgrass for Biomass

The economic potential of cellulosic biomass from switchgrass has heretofore been evaluated using estimates of farm costs based on extrapolation from experimental data and budget estimates. The objective of the project reported here was to estimate the cost of production that would be experienced by farmers on commercial production situations. Switchgrass was produced as a biomass crop on commercial-scale fields by ten contracting farmers located from northern North Dakota to southern Nebraska. Results showed a wide range of yields and costs across the five production years and ten sites, with an overall average cost of $65.86 Mg^?1 of biomass dry matter, and annualized yield of 5.0 Mg ha^?1. The low-cost half of the producers were able to produce at an average cost of $51.95 Mg^?1over the 5-year period. When projected to a full 10-year rotation, their cost fell further to $46.26 Mg^?1. We conclude that substantial quantities of biomass feedstock could have been produced in this region at a cost of about $50 Mg^?1 at the farm gate, which translates to about $0.13/l of ethanol. These results provide a more reliable benchmark for current commercial production costs as compared to other estimates, which range from $25 to $100 Mg^?1.     

Effects of harvest frequency and biosolids application on switchgrass yield,feedstock quality,and theoretical ethanol yield

Sustainable development of a bioenergy industry will require low‐cost, high‐yielding biomass feedstock of desirable quality. Switchgrass (Panicum virgatum L.) is one of the primary feedstock candidates in North America, but the potential to grow this biomass crop using fertility from biosolids has not been fully explored. The objective of this study was to examine the effects of harvest frequency and biosolids application on switchgrass in Virginia, USA. ‘Cave‐in‐Rock’ switchgrass from well‐established plots was cut once (November) or twice (July and November) per year between 2010 and 2012. Class A biosolids were applied once at rates of 0, 153, 306, and 459 kg N ha^?1 in May 2010. Biomass yield, neutral and acid detergent fiber, cellulose, hemicellulose, lignin, and ash were determined. Theoretical ethanol potential (TEP, l ethanol Mg^?1 biomass) and yield (TEY, l ethanol ha^?1) were calculated based on cellulose and hemicellulose concentrations. Cutting twice per season produced greater biomass yields than one cutting (11.7 vs. 9.8 Mg ha^?1) in 2011, but no differences were observed in other years. Cutting once produced feedstock with greater TEP (478 vs. 438 l Mg^?1), but no differences in TEY between cutting frequencies. Biosolids applied at 153, 306, and 459 kg N ha^?1 increased biomass yields by 25%, 37%, and 46%, and TEY by 25%, 34%, and 42%, respectively. Biosolids had inconsistent effects on feedstock quality and TEP. A single, end‐of‐season harvest likely will be preferred based on apparent advantages in feedstock quality. Biosolids can serve as an effective alternative to N fertilizer in switchgrass‐to‐energy systems.     

Interplay between yield,nitrogen application,and logistics on the potential energetic and greenhouse gas emissions from biomass crops

The interplay between nitrogen fertilization (N), yield, nitrous oxide emissions (N₂O), and diesel fuel utilization associated with harvest and transport logistics of biomass crops remains poorly understood. In this research, we show that intensification (in terms of N) of bioenergy cropping to maximize yield supports not only minimized land use but also maximized logistics efficiency in terms of diesel use. This paradigm was examined within the scope of the billion‐ton biofuels vision and the Energy Independence and Security Act of 2007 using potential yields on marginal and prime agricultural land. Sixteen scenarios were investigated that considered the primary factors with agriculture bioenergy; biomass yield (11.2 and 22.4 Mg ha^?1 yr^?1), two nitrogen fertilizer application rates (50 and 100 kg N ha^?1 yr^?1), two Greenhouse Gas Emissions (GHGE) factors for synthetic nitrogen to nitrous oxide (1.5 and 5%), and three harvest/transportation efficiencies (50, 65, and 80%). These scenarios resulted in energy consumption between 747 and 1351 MJ Mg^?1 and GHGE between 72 and 311 kg CO₂ eq Mg^?1. GHGE emissions are strongly related to the emission of nitrous oxide from soils due to nitrogen fertilization and could represent over 80% of the GHGE relative to biomass harvest logistics. These data imply that synthetic N supplementation to maximize yield could reduce the burden due to diesel fuel for harvest, but would rapidly become the most significant contributor to GHGE. Minimizing the impact of N fertilization will be critical for reducing the GHGE associated with biomass production.     

Harvest and nitrogen effects on bioenergy feedstock quality of grass-legume mixtures on Conservation Reserve Program grasslands

Perennial grass mixtures established on Conservation Reserve Program (CRP) lands can be an important source of feedstock for bioenergy production. This study aimed to evaluate management practices for optimizing the quality of bioenergy feedstock and stand persistence of grass-legume mixtures under diverse environments. A 5-year field study (2008–2012) was conducted to assess the effects of two harvest timings (at anthesis vs after complete senescence) and three nitrogen (N) rates (0, 56, 112 kg N ha⁻¹) on biomass chemical compositions (i.e., cell wall components, ash, volatiles, total carbon, and N contents) and the feedstock energy potential, examined by the theoretical ethanol yield (TEY) and the total TEY (i.e., the product of biomass yield and TEY, L ha⁻¹), of cool-season mixtures in Georgia and Missouri and a warm-season mixture in Kansas. The canonical correlation analysis (CCA) was used to investigate the effect of vegetative species transitions on feedstock quality. Although environmental variations (mainly precipitation) greatly influenced the management effect on chemical compositions, the delayed harvest after senescence generally improved feedstock quality. In particular, the overall cell wall concentrations and TEY of the warm-season mixtures increased by approximately 7%. Additional N supplies improved the total TEY of both mixtures by ~1.6–4.2 L ha⁻¹ per 1.0 kg N ha⁻¹ input but likely lowered the feedstock quality, particularly for the cool-season mixture. The cell wall concentrations of cool-season mixture reduced by approximately 3%–6%. The CCA results indicated that the increased legume compositions (under low N input) likely enhanced lignin but reduced ash concentrations. This field research demonstrated that with proper management, grass-legume mixtures on CRP lands can provide high-quality feedstock for bioenergy productions.     

Species Composition Changes in Conservation Reserve Program (CRP) Grassland When Managed for Biomass Feedstock Production

Grasslands enrolled in the Conservation Reserve Program (CRP) serve as one of the potential national herbaceous resources for use as a dedicated bioenergy feedstock. The goal of this project was to assess the yield potential and suitability of CRP grassland as a bioenergy feedstock source across the USA in regions with significant CRP land resources. In addition to that goal, one major objective of this project was to assess vegetation composition changes that also occurred on these different CRP grasslands over time with different harvest and fertilization management strategies. Three levels of nitrogen fertilization (0, 56, and 112 kg ha^?1) and two harvest timings [peak standing crop (PSC) or end of growing season (EGS)] were evaluated for effects on biomass production and resulting species composition changes. Three sites in regions containing concentrated tracts of CRP grassland and representing variable climatic parameters were analyzed for vegetation composition trends over the course of six growing seasons (2008–2013). Specifically, a mixture of warm-season perennial grasses was evaluated in Kansas (KS), while a cool-season mixture was evaluated in Missouri (MO). North Dakota (ND) contained a mixture of both warm- and cool-season grasses. At the MO and KS sites, nitrogen fertilization significantly altered the grass and legume composition over time by lowering the legume percentage in the stand. In KS and ND, the two sites with warm-season grasses, harvesting in mid-summer at PSC, greatly reduced warm-season grass composition over time in favor of annual cool-season grass invaders or perennial cool-season grasses. Any shift to less desirable or less productive species limits the ability of these lands to provide a sustainable or reliable feedstock for bioenergy production.     

Simulating the effects of harvest and biofuel production on the forest system carbon balance of the Midwest,USA

Forests of the Midwestern United States are an important source of fiber for the wood and paper products industries. Scientists, land managers, and policy makers are interested in using woody biomass and/or harvest residue for biofuel feedstocks. However, the effects of increased biomass removal for biofuel production on forest production and forest system carbon balance remain uncertain. We modeled the carbon (C) cycle of the forest system by dividing it into two distinct components: (1) biological (net ecosystem production, net primary production, autotrophic and heterotrophic respiration, vegetation, and soil C content) and (2) industrial (harvest operations and transportation, production, use, and disposal of major wood products including biofuel and associated C emissions). We modeled available woody biomass feedstock and whole‐system carbon balance of 220 000 km² of temperate forests in the Upper Midwest, USA by coupling an ecosystem process model to a collection of greenhouse gas life‐cycle inventory models and simulating seven forest harvest scenarios in the biological ecosystem and three biofuel production scenarios in the industrial system for 50 years. The forest system was a carbon sink (118 g C m^?2 yr^?1) under current management practices and forest product production rates. However, the system became a C source when harvest area was doubled and biofuel production replaced traditional forest products. Total carbon stores in the vegetation and soil increased by 5–10% under low‐intensity management scenarios and current management, but decreased up to 3% under high‐intensity harvest regimes. Increasing harvest residue removal during harvest had more modest effects on forest system C balance and total biomass removal than increasing the rate of clear‐cut harvests or area harvested. Net forest system C balance was significantly, and negatively correlated (R² = 0.67) with biomass harvested, illustrating the trade‐offs between increased C uptake by forests and utilization of woody biomass for biofuel feedstock.     

Corn stover feedstock trials to support predictive modeling

To be sustainable, feedstock harvest must neither degrade soil, water, or air resources nor negatively impact productivity or subsequent crop yields. Simulation modeling will help guide the development of sustainable feedstock production practices, but not without field validation. This paper introduces field research being conducted in six states to support Sun Grant Regional Partnership modeling. Our objectives are to (1) provide a fundamental understanding of limiting factor(s) affecting corn (Zea mays L.) stover harvest, (2) develop tools (e.g., equations, models, etc.) that account for those factors, and (3) create a multivariant analysis framework to combine models for all limiting factors. Sun Grant modelers will use this information to improve regional estimates of feedstock availability. A minimum data set, including soil organic carbon (SOC), total N, pH, bulk density (BD), and soil‐test phosphorus (P), and potassium (K) concentrations, is being collected. Stover yield for three treatments (0%, 50%, and 90% removal) and concentrations of N, P, and K in the harvested stover are being quantified to assess the impact of stover harvest on soil resources. Grain yield at a moisture content of 155 g kg^?1 averaged 9.71 Mg ha^?1, matching the 2008 national average. Stover dry matter harvest rates ranged from 0 to 7 Mg ha^?1. Harvesting stover increased N–P–K removal by an average of 42, 5, and 45 kg ha^?1 compared with harvesting only grain. Replacing those three nutrients would cost $53.68 ha^?1 based on 2009 fertilizer prices. This first‐year data and that collected in subsequent years is being used to develop a residue management tool that will ultimately link multiple feedstock supplies together in a landscape vision to help develop a comprehensive carbon management plan, quantify corn stover harvest effects on soil quality, and predict regional variability in feedstock supplies.     

Switchgrass nitrogen response and estimated production costs on diverse sites

Switchgrass (Panicum virgatum L.) has been the principal perennial herbaceous crop investigated for bioenergy production in North America given its high production potential, relatively low input requirements, and potential suitability for use on marginal lands. Few large trials have determined switchgrass yields at field scale on marginal lands, including analysis of production costs. Thus, a field‐scale study was conducted to develop realistic yield and cost estimates for diverse regions of the USA. Objectives included measuring switchgrass response to fertility treatments (0, 56, and 112 kg N ha^?1) and generating corresponding estimates of production costs for sites with diverse soil and climatic conditions. Trials occurred in Iowa, New York, Oklahoma, South Dakota, and Virginia, USA. Cultivars and management practices were site specific, and field‐scale equipment was used for all management practices. Input costs were estimated using final harvest‐year (2015) prices, and equipment operation costs were estimated with the MachData model ($2015). Switchgrass yields generally were below those reported elsewhere, averaging 6.3 Mg ha^?1 across sites and treatments. Establishment stand percent ranged from 28% to 76% and was linked to initial year production. No response to N was observed at any site in the first production year. In subsequent seasons, N generally increased yields on well‐drained soils; however, responses to N were nil or negative on less well‐drained soils. Greatest percent increases in response to 112 kg N ha^?1 were 57% and 76% on well‐drained South Dakota and Virginia sites, where breakeven prices to justify N applications were over $70 and $63 Mg^?1, respectively. For some sites, typically promoted N application rates may be economically unjustified; it remains unknown whether a bioenergy industry can support the breakeven prices estimated for sites where N inputs had positive effects on switchgrass yield.     

Harvest management affects biomass composition responses of C4 perennial bioenergy grasses in the humid subtropical USA

Elephantgrass (Pennisetum purpureum Schum.) and energycane (Saccharum spp. hybrid) are high‐yielding C4 grasses that are attractive biofuel feedstocks in the humid subtropics. Determining appropriate harvest management practices for optimal feedstock chemical composition is an important precursor to their successful use in production systems. In this research, we have investigated the effects of harvest timing and frequency on biomass nutrient, carbohydrate and lignin composition of UF1 and cv. Merkeron elephantgrasses and cv. L 79‐1002 energycane. Biomass properties under increased harvest frequency (twice per year) and delayed harvest (once per year after frost) were compared with a control (once per year prior to frost). There were no differences between elephantgrass entries in structural carbohydrates; however, elephantgrasses had greater structural hexose concentration than energycane for single‐harvest treatments (avg. 398 vs. 366 mg g^?1), a trait that is preferred for biofuel production. Delayed harvest of energycane decreased structural hexose compared with the control (374 vs. 357 mg g^?1) because nonstructural components accumulated in energycane stem as harvest was delayed. Frequent defoliation (2X) increased N, P, and ash concentrations (75% for N and P and 58% for ash) in harvested biomass compared with single‐harvest treatments. We conclude that multiple harvests per year increase the harvest period during which feedstock is available for processing, but they do not result in optimal feedstock composition. In contrast, extending the period of feedstock supply by delaying a single harvest to after first freeze did not negatively affect cell wall constituent properties, while it increased length of the harvest period by ~30 days in the southeast USA.     

Cattle feed or bioenergy? Consequential life cycle assessment of biogas feedstock options on dairy farms

On‐farm anaerobic digestion (AD) of wastes and crops can potentially avoid greenhouse gas (GHG) emissions, but incurs extensive environmental effects via carbon and nitrogen cycles and substitution of multiple processes within and outside farm system boundaries. Farm models were combined with consequential life cycle assessment (CLCA) to assess plausible biogas and miscanthus heating pellet scenarios on dairy farms. On the large dairy farm, the introduction of slurry‐only AD led to reductions in global warming potential (GWP) and resource depletion burdens of 14% and 67%, respectively, but eutrophication and acidification burden increases of 9% and 10%, respectively, assuming open tank digestate storage. Marginal GWP burdens per Mg dry matter (DM) feedstock codigested with slurry ranged from –637 kg CO₂e for food waste to +509 kg CO₂e for maize. Codigestion of grass and maize led to increased imports of concentrate feed to the farm, negating the GWP benefits of grid electricity substitution. Attributing grass‐to‐arable land use change (LUC) to marginal wheat feed production led to net GWP burdens exceeding 900 kg CO₂e Mg^?1 maize DM codigested. Converting the medium‐sized dairy farm to a beef‐plus‐AD farm led to a minor reduction in GWP when grass‐to‐arable LUC was excluded, but a 38% GWP increase when such LUC was attributed to marginal maize and wheat feed required for intensive compensatory milk production. If marginal animal feed is derived from soybeans cultivated on recently converted cropland in South America, the net GWP burden increases to 4099 kg CO₂e Mg^?1 maize DM codigested – equivalent to 55 Mg CO₂e yr^?1 per hectare used for AD‐maize cultivation. We conclude that AD of slurry and food waste on dairy farms is an effective GHG mitigation option, but that the quantity of codigested crops should be strictly limited to avoid potentially large international carbon leakage via animal feed displacement.     

Establishment of reed canary grass with perennial legumes or barley and different fertilization treatments: effects on yield,botanical composition and nitrogen fixation

In two field experiments in northern Sweden, we investigated if intercropping reed canary grass (RCG; Phalaris arundinacea L.) with nitrogen‐fixing perennial legumes could reduce N‐fertilizer requirements and also if RCG ash or sewage sludge could be used as a supplement for mineral P and K. We compared biomass production, N uptake and N‐fixation of RCG in monoculture and mixtures of RCG with alsike clover (Trifolium hybridum L.), red clover (Trifolium pratense L.), goat's rue (Galega orientalis Lam.) and kura clover (Trifolium ambiguum M. Bieb.). In one experiment, RCG was also undersown in barley (Hordeum vulgare L.). Three fertilization treatments were applied: 100 kg N ha^?1, 50 kg N ha^?1 and 50 kg N ha^?1 + RCG ash/sewage sludge. We used a delayed harvest method: cutting the biomass in late autumn, leaving it on the field during the winter and harvesting in spring. The legume biomass of the mixtures at the inland experimental site was small and did not affect RCG growth negatively. At the coastal site, competition from higher amount of clover biomass affected RCG growth and spring yield negatively. N‐fixation in red clover and alsike clover mixtures in the first production year approximately covered half of recommended N‐fertilization rate. Goat's rue and kura clover did not establish well at the costal site, but at the inland site goat's rue formed a small but vital undergrowth. RCG undersown in barley gave lower yield, both in autumn and spring, than the other treatments. The high N treatment gave a higher spring yield at the inland site than the low N treatments, but there were no differences due to fertilization treatments at the coastal site. For spring harvest, there were no yield benefits of RCG/legume intercropping compared with RCG monoculture. However, intercropping might be more beneficial in a two‐harvest system.     

Biorefinery for combined production of jet fuel and ethanol from lipid‐producing sugarcane: a techno‐economic evaluation

Replacing fossil fuels with an economically viable green alternative at scale has proved most challenging in the aviation sector. Recently sugarcane, the most productive crop on the planet, has been engineered to accumulate lipids. This opens the way for production of far more industrial vegetable oil per acre than previously possible. This study performs techno‐economic feasibility analysis of jet fuel production from this new cost efficient and high yield feedstock. A comprehensive process model for biorefinery producing hydrotreated jet fuel (from lipids) and ethanol (from sugars), with 1 600 000 MT yr^?1 lipid‐cane processing capacity, was developed in SuperPro Designer. Considering lipid‐cane development is continuing for higher oil concentrations, analysis was performed with lipid‐cane containing 5%, 10%, 15%, and 20% lipids. Capital investments for the biorefinery ranged from 238.1 to 351.2 million USD, with jet fuel capacities of 12.6–50.5 million liters (correspondingly ethanol production of nil to 102.6 million liters). The production cost of jet fuel for different scenarios was estimated Replacing fossil fuels with an economically viable green alternative at scale has proved most challenging in the aviation sector. Recently sugarcane, the most productive crop on the planet, has been engineered to accumulate lipids. This opens the way for production of far more industrial vegetable oil per acre than previously possible. This study performs techno‐economic feasibility analysis of jet fuel production from this new cost efficient and high yield feedstock. A comprehensive process model for biorefinery producing hydrotreated jet fuel (from lipids) and ethanol (from sugars), with 1 600 000 MT yr^?1 lipid‐cane processing capacity, was developed in SuperPro Designer. Considering lipid‐cane development is continuing for higher oil concentrations, analysis was performed with lipid‐cane containing 5%, 10%, 15%, and 20% lipids. Capital investments for the biorefinery ranged from 238.1 to 351.2 million USD, with jet fuel capacities of 12.6–50.5 million liters (correspondingly ethanol production of nil to 102.6 million liters). The production cost of jet fuel for different scenarios was estimated $0.73 to $1.79 per liter ($2.74 to $6.76 per gal) of jet fuel. In all cases, the cost of raw materials accounted for more than 70% of total operational cost. Biorefinery was observed self‐sustainable for steam and electricity requirement, because of in‐house steam and electricity generation from burning of bagasse. Minimum fuel selling prices with a 10% discount rate for 20% lipid case was estimated $1.40/L ($5.31/gal), which was lower than most of the reported prices of renewable jet fuel produced from other oil crops and algae. Along with lower production costs, lipid‐cane could produce as high as 16 times the jet fuel (6307 L ha^?1) per unit land than that of other oil crops and do so using low‐value land unsuited to most other crops, while being highly water and nitrogen use efficient.     

Determinants of the economic viability of mallee eucalypts as a short rotation coppice crop integrated into farming systems of Western Australia

Mallee eucalypts are being developed as a short rotation coppice crop for integration into agricultural systems in the south‐west of Western Australia. These have potential for biomass production for bioenergy, eucalyptus oil and generating carbon credits and to help control the extensive occurrence of dryland salinity. Some 12,000 ha of mallee planting has been undertaken since 1994, mostly in the form of wide‐spaced, narrow belts within the annual agricultural system. Production and market data were used to estimate levelized costs (LC) of mallee biomass production under different harvest regimes across 11 sites from 2006 to 2012. We found LC ranged from AUD40 to AUD257 fresh Mg^?1. LC was most strongly determined by mallee production, followed by the crop/pasture rotation decisions of the landholder. Mallee harvest regime had minor impact on LC. Crop and pasture yield loss due to competition from the mallee belts accounted for 38% of costs, harvesting biomass was 32%, opportunity cost of the land occupied by the mallee belts was 16% while establishment and maintenance costs accounted for 14% of the costs. When income from carbon sequestered in mallee root biomass was included, the LC dropped by an average of 11% at the current Australian price of AUD15 Mg^?1 CO₂ equivalent (CO₂e). The income from carbon sequestered in root biomass alone is unlikely to make mallee agroforestry economically viable. Hence, income from harvested biomass in the form of feedstocks for industry or carbon credits is necessary to make mallee agroforestry commercially attractive. LC for unharvested mallee belts ranged from AUD33 to AUD237 Mg^?1. Where above‐ and below‐ground biomass is converted to CO₂e at AUD15 Mg^?1, the LC drops to AUD11–AUD64, with three of 11 sites likely to be profitable. These three sites were characterized by high biomass production with low agricultural gross margins.     

Economic Evaluation of Switchgrass Feedstock Production Systems Tested in Potassium-Deficient Soils

Limited information is available about the economic benefits and costs associated with managing switchgrass (Panicum virgatum L.) produced for bioenergy feedstock in the K-deficient soils common in the southern Great Plains. The objectives of this study were to determine the most economical production system for harvesting and managing N and K fertilizations on switchgrass stands and to determine how sensitive the results are to various feedstock and fertilizer market price scenarios. A 4-year agronomic field experiment was conducted on a K-deficient site in South Central Oklahoma; the treatments included two harvest systems (summer and winter (SW) and winter only (W)), two N rates (0 and 135 kg ha^?1), and two K rates (0 and 67 kg ha^?1). Enterprise budgeting techniques and mixed ANOVA models were used to determine and compare the effects of eight harvest/N/K systems on yield, total cost, revenue, and net return. The harvest/N/K systems evaluated included SW/0/0, SW/0/67, SW/135/0, SW/135/67, W/0/0, W/0/67, W/135/0, and W/135/67. Results revealed the SW/135/67 system produced significantly (P?>?0.0001) greater average yield compared to the other systems; however, the SW/0/0 system was the most (P?>?0.0001) economical, realizing an average net return of $415 ha^?1. Compared to the base–case net return of the SW/0/0 system, the value of the additional yield generated with the SW/135/67 system was less than the costs associated with the extra nutrients and additional harvest activity. For feedstock prices greater than $110 Mg^?1, the most economical system shifted from the SW/0/0 to favor the SW/135/67 system.     

Economic Feasibility of Using Switchgrass Pasture to Produce Beef Cattle Gain and Bioenergy Feedstock

Integration of switchgrass (Panicum virgatum L.) into livestock production systems has potential to improve farm economics and encourage development of a biofuel industry in the Southern Great Plains. The objectives of this study were to determine the economics of seven alternative switchgrass grazing and bioenergy feedstock systems and to determine how sensitive the results are among the systems for a range of cattle and feedstock prices. Data were collected from a completely randomized designed grazing study in south-central Oklahoma in 2008, 2009, and 2010. Stocking density treatments [0, 2.5, 4.9 and 7.4 hd ha^?1] were randomly assigned to 12 0.81-ha switchgrass pastures. Using biological data from the field trial, economic data collected from the marketplace and assumptions about prices of bioenergy feedstock, seven production systems were simulated. The systems included no-graze feedstock only (NG/FS); graze lightly no feedstock (GL/NF); graze moderately no feedstock (GM/NF); graze heavily no feedstock H/NF)]; lightly grazed plus feedstock (GL/F); moderately grazed plus feedstock (GM/F); and heavily grazed plus feedstock (GH/F). Enterprise budgeting was used to compute expected net returns for the seven systems. Random-effects mixed ANOVA models were used to determine the effects of production system on yield, gain, and net return. At a feedstock price $0 Mg^?1, the GM/NF was the most profitable ($45 ha^?1) system. At feedstock prices of $55 and $83 Mg^?1, the GL/F system realized net returns of $232 and $523 ha^?1, respectively, and for feedstock prices >$83 Mg^?1, the NG/FS system was determined to be most economical.     

Productivity, 15N dynamics and water use efficiency in low‐ and high‐input switchgrass systems

Sustainable and environmentally benign switchgrass production systems need to be developed for switchgrass to become a large‐scale dedicated energy crop. An experiment was conducted in California from 2009 to 2011 to determine the sustainability of low‐ and high‐input irrigated switchgrass systems as a function of yield, irrigation requirement, crop N removal, N translocation from aboveground (AG) to belowground (BG) biomass during senescence, and fertilizer ¹⁵N recovery (FNR) in the AG and BG biomass (0–300 cm), and soil (0–300 cm). The low‐input system consisted of a single‐harvest (mid‐fall) irrigated until flowering (early summer), while the high‐input system consisted of a two‐harvest system (early summer and mid‐fall) irrigated throughout the growing season. Three N fertilization rates (0, 100, and 200 kg N ha^?1 yr^?1) were applied as subtreatments in a single application in the spring of each year. A single pulse of ¹⁵N enriched fertilizer was applied in the first year of the study to micro‐plots within the 100 kg N ha^?1 subplots. Average yields across years under optimal N rates (100 and 200 kg ha^?1 yr^?1 for low‐ and high‐input systems, respectively) were 20.7 and 24.8 Mg ha^?1. However, the low input (372 ha mm) required 47% less irrigation than the high‐input system (705 ha mm) and achieved higher irrigation use efficiency. In addition, the low‐input system had 46% lower crop N removal, 53% higher N stored in BG biomass, and a positive N balance, presumably due to 49% of ¹⁵N translocation from AG to BG biomass during senescence. Furthermore, at the end of 3 years, the low‐input system had lower fertilizer ¹⁵N removed by harvest (26%) and higher FNR remaining in the system in BG biomass plus soil (31%) than the high‐input system (45% and 21%, respectively). Based on these findings, low‐input systems are more sustainable than high‐input systems in irrigated Mediterranean climates.     

Could Miscanthus replace maize as the preferred substrate for anaerobic digestion in the United Kingdom? Future breeding strategies

Fodder maize is the most commonly used crop for biogas production owing to its high yields, high concentrations of starch and good digestibility. However, environmental concerns and possible future conflict with land for food production may limit its long‐term use. The bioenergy grass, Miscanthus, is a high‐yielding perennial that can grow on marginal land and, with ‘greener’ environmental credentials, may offer an alternative. To compete with maize, the concentration of non‐structural carbohydrates (NSC) and digestibility may need to be improved. Non‐structural carbohydrates were quantified in 38 diverse genotypes of Miscanthus in green‐cut biomass in July and October. The aim was to determine whether NSC abundance could be a target for breeding programmes or whether genotypes already exist that could rival maize for use in anaerobic digestion systems. The saccharification potential and measures of N P and K were also studied. The highest concentrations of NSC were in July, reaching a maximum of 20% DW. However, the maximum yield was in October with 300–400 g NSC plant^?1 owing to higher biomass. The digestibility of the cell wall was higher in July than in October, but the increase in biomass meant yields of digestible sugars were still higher in October. Nutrient concentrations were at least twofold higher in July compared to November, and the abundance of potassium showed the greatest degree of variation between genotypes. The projected maximum yield of NSC was 1.3 t ha^?1 with significant variation to target for breeding. Starch accumulated in the highest concentrations and continued to increase into autumn in some genotypes. Therefore, starch, rather than sugars, would be a better target for breeding improvement. If harvest date was brought forward to autumn, nutrient losses in non‐flowering genotypes would be comparable to an early spring harvest.