Lipid-protein interactions: NMR study of melittin and its binding to lysophosphatidylcholine

Proton NMR of melittin differs according to the association state of the peptide in the monomer or tetramer. Melittin interacts with lysophosphatidylcholine micelles, whatever the association state of melittin; well resolved superimposed spectra from both components for all the lipid to peptide molar ratios are observed. Within the complexes, local mobility and fast exchange occurs. On binding concomitant shifts on Trp₁₉ indole lines and on the aliphatic CH₂ protons of the lipids are detected. The lipid perturbation is maximum for methylene groups in α and β of the ester bond, this could allow positionning of Trp₁₉ in the hydrophobic core of the lipids.     

Investigation of the membrane-active peptides melittin and glucagon by photochemically induced dynamic-nuclear-polarization (photo-CIDNP) NMR

The photochemically induced dynamic-nuclear-polarization (photo-CIDNP) NMR technique was used to investigate the membrane-active peptides melittin and glucagon. The experiments were performed both in the absence and presence of phospholipid vesicles in order to study the topography of the membrane-bound state. From the results it can be concluded that the melittin peptide chain is oriented in such a way that the single tryptophan residue (Trp19) reaches into the membrane. In the case of glucagon, a binding interaction with vesicle membranes is indicated within the pH range 2-10, whereby the single tryptophan residue (Trp25) is buried in the lipid bilayer and the tyrosine and histidine residues are exposed to the aqueous solvent.     

Anthrylvinyl-labeled phospholipids as fluorescent membrane probes. The action of melittin on mulitlipid systems

The interaction of melittin with multicomponent lipid mixtures composed of phosphatidylcholine, sphingomyelin and phosphatidylserine or phosphatidylglycerol was investigated by measuring the intrinsic fluorescence of the peptide, steady state fluorescence anisotropy of, and Trp-fluorescence energy transfer to fluorescent analogs of the same phospholipids bearing the anthrylvinyl fluorophore in one of the aliphatic chains at various distances from the polar head group. Based on the finding that at high lipid/peptide ratio the peptide induces unequal changes in the fluorescence parameters of phospholipid probes differing structurally only in their polar head groups, it is concluded that melittin induces lipid demixing in its nearest environment. Comparison of the fluorescence energy transfer from Trp to different lipid probes indicates that the depth of penetration of melittin into the bilayer depends on the polar head group composition of the phospholipid matrix and that certain segments of the melittin chain display a specific affinity for a given lipid head group.     

Influence of the lipid composition on the kinetics of concerted insertion and folding of melittin in bilayers

We have examined the kinetics of the adsorption of melittin, a secondary amphipathic peptide extracted from bee venom, on lipid membranes using three independent and complementary approaches. We probed (i) the change in the polarity of the ¹⁹Trp of the peptide upon binding, (ii) the insertion of this residue in the apolar core of the membrane, measuring the ¹⁹Trp-fluorescence quenching by bromine atoms attached on lipid acyl chains, and (iii) the folding of the peptide, by circular dichroism (CD). We report a tight coupling of the insertion of the peptide with its folding as an α-helix. For all the investigated membrane systems (cholesterol-containing, phosphoglycerol-containing, and pure phosphocholine bilayers), the decrease in the polarity of ¹⁹Trp was found to be significantly faster than the increase in the helical content of melittin. Therefore, from a kinetics point of view, the formation of the α-helix is a consequence of the insertion of melittin. The rate of melittin folding was found to be influenced by the lipid composition of the bilayer and we propose that this was achieved by the modulation of the kinetics of insertion. The study reports a clear example of the coupling existing between protein penetration and folding, an interconnection that must be considered in the general scheme of membrane protein folding.     

Structural and thermodynamic analyses of the interaction between melittin and lipopolysaccharide

Lipopolysaccharide (LPS), the major constituent of the outer membrane of Gram-negative bacteria, is the very first site of interactions with the antimicrobial peptides. In this work, we have determined a solution conformation of melittin, a well-known membrane active amphiphilic peptide from honey bee venom, by transferred nuclear Overhauser effect (Tr-NOE) spectroscopy in its bound state with lipopolysaccharide. The LPS bound conformation of melittin is characterized by a helical structure restricted only to the C-terminus region (residues A15-R24) of the molecule. Saturation transfer difference (STD) NMR studies reveal that several C-terminal residues of melittin including Trp19 are in close proximity with LPS. Isothermal titration calorimetry (ITC) data demonstrates that melittin binding to LPS or lipid A is an endothermic process. The interaction between melittin and lipid A is further characterized by an equilibrium association constant (Ka) of 2.85 x 10(6) M(-1) and a stoichiometry of 0.80, melittin/lipid A. The estimated free energy of binding (delta G0), -8.8 kcal mol(-1), obtained from ITC experiments correlates well with a partial helical structure of melittin in complex with LPS. Moreover, a synthetic peptide fragment, residues L13-Q26 or mel-C, derived from the C-terminus of melittin has been found to contain comparable outer membrane permeabilizing activity against Escherichia coli cells. Intrinsic tryptophan fluorescence experiments of melittin and mel-C demonstrate very similar emission maxima and quenching in presence of LPS micelles. The Red Edge Excitation Shift (REES) studies of tryptophan residue indicate that both peptides are located in very similar environment in complex with LPS. Collectively, these results suggest that a helical conformation of melittin, at its C-terminus, could be an important element in recognition of LPS in the outer membrane.     

The structure of melittin in membranes.

The conformation of the polypeptide melittin in lipid membranes as determined by Raman spectroscopy is a bent alpha-helix formed by the mainly hydrophobic residues 1-21, and a nonhelical COOH-terminal segment of the hydrophilic residues 22-26. Fluorescence quenching experiments on residue Trp19 reveal that all COOH-termini are located on that side of a vesicular membrane to which melittin was added. By means of fluorescence energy transfer between unmodified and modified Trp19 residues, melittin is shown to aggregate in membranes predominantly in the form of tetramers. These and previous results on the location and orientation of melittin permit the development of a model for the structure of melittin tetramers in membranes. The hydrophilic sides of four bilayer-spanning helices face each other to form a hydrophilic pore through the membrane.     

Modulation of melittin-induced lysis by surface charge density of membranes.

Phosphorus NMR spectroscopy was used to characterize the importance of electrostatic interactions in the lytic activity of melittin, a cationic peptide. The micellization induced by melittin has been characterized for several lipid mixtures composed of saturated phosphatidylcholine (PC) and a limited amount of charged lipid. For these systems, the thermal polymorphism is similar to the one observed for pure PC: small comicelles are stable in the gel phase and extended bilayers are formed in the liquid crystalline phase. Vesicle surface charge density influences strongly the micellization. Our results show that the presence of negatively charged lipids (phospholipid or unprotonated fatty acid) reduces the proportion of lysed vesicles. Conversely, the presence of positively charged lipids leads to a promotion of the lytic activity of the peptide. The modulation of the lytic effect is proposed to originate from the electrostatic interactions between the peptide and the bilayer surface. Attractive interactions anchor the peptide at the surface and, as a consequence, inhibit its lytic activity. Conversely, repulsive interactions favor the redistribution of melittin into the bilayer, causing enhanced lysis. A quantitative analysis of the interaction between melittin and negatively charged bilayers suggests that electroneutrality is reached at the surface, before micellization. The surface charge density of the lipid layer appears to be a determining factor for the lipid/peptide stoichiometry of the comicelles; a decrease in the lipid/peptide stoichiometry in the presence of negatively charged lipids appears to be a general consequence of the higher affinity of melittin for these membranes.     

Structural and thermodynamic analyses of the interaction between melittin and lipopolysaccharide

Lipopolysaccharide (LPS), the major constituent of the outer membrane of Gram-negative bacteria, is the very first site of interactions with the antimicrobial peptides. In this work, we have determined a solution conformation of melittin, a well-known membrane active amphiphilic peptide from honey bee venom, by transferred nuclear Overhauser effect (Tr-NOE) spectroscopy in its bound state with lipopolysaccharide. The LPS bound conformation of melittin is characterized by a helical structure restricted only to the C-terminus region (residues A15-R24) of the molecule. Saturation transfer difference (STD) NMR studies reveal that several C-terminal residues of melittin including Trp19 are in close proximity with LPS. Isothermal titration calorimetry (ITC) data demonstrates that melittin binding to LPS or lipid A is an endothermic process. The interaction between melittin and lipid A is further characterized by an equilibrium association constant (K_a) of 2.85 × 10⁶ M^− 1 and a stoichiometry of 0.80, melittin/lipid A. The estimated free energy of binding (ΔG⁰), − 8.8 kcal mol^− 1, obtained from ITC experiments correlates well with a partial helical structure of melittin in complex with LPS. Moreover, a synthetic peptide fragment, residues L13-Q26 or mel-C, derived from the C-terminus of melittin has been found to contain comparable outer membrane permeabilizing activity against Escherichia coli cells. Intrinsic tryptophan fluorescence experiments of melittin and mel-C demonstrate very similar emission maxima and quenching in presence of LPS micelles. The Red Edge Excitation Shift (REES) studies of tryptophan residue indicate that both peptides are located in very similar environment in complex with LPS. Collectively, these results suggest that a helical conformation of melittin, at its C-terminus, could be an important element in recognition of LPS in the outer membrane.     

Phase separations induced by melittin in negatively-charged phospholipid bilayers as detected by fluorescence polarization and differential scanning calorimetry

Interactions between melittin and a variety of negatively-charged lipid bilayers have been investigated by intrinsic fluorescence, fluorescence polarization of 1,6-diphenylhexatriene and differential scanning calorimetry. (1) Intrinsic fluorescence of the single tryptophan residue of melittin shows that binding of this peptide to negatively-charged phospholipids is directly related to the surface charge density, but is unaffected by the physical state of lipids, fluid or gel, single-shell vesicles or unsonicated dispersions. (2) Changes in the thermotropic properties of negatively-charged lipids upon melittin binding allow to differentiate two groups of lipids: (i) A progressive disappearance of the transition, without any shift in temperature, is observed with monoacid C₁₄ lipids such as dimyristoylphosphatidylglycerol and -serine (group 1). (ii) With a second group of lipids (group 2), a transition occurs even at melittin saturation, and two transitions are detected at intermediate melittin content, one corresponding to remaining unperturbed lipids, the other shifted downward by 10–20°C. This second group of lipids is constituted by monoacid C₁₆ lipids, dipalmitoylphosphatidylglycerol and -serine. Phosphatidic acids also enter this classification, but it is the net charge of the phosphate group which allows to discriminate: singly charged phosphatidic acids belong to group 2, whereas totally ionized ones behave like group 1 lipids, whatever the chain length. (3) It is concluded that melittin induces phase separations between unperturbed lipid regions which give a transition at the same temperature as pure lipid, and peptide rich domains in which the stoichiometry is 1 toxin per 8 phospholipids. The properties of such domains depend on the bilayer stability: in the case of C₁₆ aliphatic chains and singly charged polar heads, the lipid-peptide domains have a transition at a lower temperature than the pure lipid. With shorter C₁₄ chains or with two net charges by polar group, the bilayer structure is probably totally disrupted, and the new resulting phase can no longer lead to a cooperative transition.     

Modulation of membrane surface curvature by peptide-lipid interactions

Recent reports on the interaction of cardiotoxin and melittin with phospholipid model membranes are reviewed and analyzed. These types of peptide toxins are able to modulate lipid surface curvature and polymorphism in a highly lipid-specific way. It is demonstrated that the remarkable variety of effects of melittin on the organization of different membrane phospholipids can be understood in a relatively simple model, based on the shape-structure concept of lipid polymorphism and taking into account the position of the peptide molecule with respect to the lipids. Based on the strong preference of the peptides for negatively charged lipids and the structural consequences thereof, and on preliminary studies of signal peptide-lipid interaction, a role of inverted or concave lipid structures in the process of protein translocation across membranes is suggested.     

Peptide inhibitors of melittin action

The sequence of peptides necessary to inhibit melittin-induced lysis was studied using 13 peptide analogues of the inhibitor Ac-IVIFDC-NH₂. Although this inhibitor is a disulfide-linked dimer, inhibition was equally effective if the thiol SH was blocked or replaced by methionine or lysine. The substitution of phenylalanine with other aromatic residues preserved activity, as did the replacement of aspartic acid by asparagine. The results suggest that the cytolytic activity of melittin can be inhibited by a short peptide of four hydrophobic residues followed by two other nonspecific residues. Fluorescence studies showed that the inhibitor caused a blue shift in the Trp emission spectrum. A spin label attached to the N-terminus of the inhibitor significantly quenched the fluorescence. These data confirmed the involvement of Trp 19 with the inhibitor, also predicted by molecular modeling of the probable binding site. Density gradient studies with large unilamellar vesicles indicated that the inhibitor prevented melittin from reacting with the lipid bilayer.     

Molecular dynamics simulation of melittin in a dimyristoylphosphatidylcholine bilayer membrane.

Molecular dynamics trajectories of melittin in an explicit dimyristoyl phosphatidylcholine (DMPC) bilayer are generated to study the details of lipid-protein interactions at the microscopic level. Melittin, a small amphipathic peptide found in bee venom, is known to have a pronounced effect on the lysis of membranes. The peptide is initially set parallel to the membrane-solution interfacial region in an alpha-helical conformation with unprotonated N-terminus. Solid-state nuclear magnetic resonance (NMR) and polarized attenuated total internal reflectance Fourier transform infrared (PATIR-FTIR) properties of melittin are calculated from the trajectory to characterize the orientation of the peptide relative to the bilayer. The residue Lys7 located in the hydrophobic moiety of the helix and residues Lys23, Arg24, Gln25, and Gln26 at the C-terminus hydrophilic form hydrogen bonds with water molecules and with the ester carbonyl groups of the lipids, suggesting their important contribution to the stability of the helix in the bilayer. Lipid acyl chains are closely packed around melittin, contributing to the stable association with the membrane. Calculated density profiles and order parameters of the lipid acyl chains averaged over the molecular dynamics trajectory indicate that melittin has effects on both layers of the membrane. The presence of melittin in the upper layer causes a local thinning of the bilayer that favors the penetration of water through the lower layer. The energetic factors involved in the association of melittin at the membrane surface are characterized using an implicit mean-field model in which the membrane and the surrounding solvent are represented as structureless continuum dielectric material. The results obtained by solving the Poisson-Bolztmann equation numerically are in qualitative agreement with the detailed dynamics. The influence of the protonation state of the N-terminus of melittin is examined. After 600 ps, the N-terminus of melittin is protonated and the trajectory is continued for 400 ps, which leads to an important penetration of water molecules into the bilayer. These observations provide insights into how melittin interacts with membranes and the mechanism by which it enhances their lysis.     

Effect of the state of association of melittin and phospholipids on their reciprocal binding

In solutions of increasing ionic strength, the molecular weight of melittin varies from 2840 (monomeric melittin) to 11 200. This polymerization, concomitant with an important change in conformation (Talbot, J.C., Dufourcq, J., De Bony, J., Faucon, J.F. and Lussan, C. (1979) FEBS Lett. 102, 191–193), is accompanied by a significant alteration in the partial specific volume of the molecule. The binding of melittin to phospholipids (phosphatidylserine, lysolecithin, dihexanoyl-, dioctanoyl- and lysolauroylphosphatidylcholine) depends on the state of association of the toxin and on the critical micelle concentration of lipids. No interaction is observed between monomeric melittin and free lipids, whereas tetrameric melittin can bind free lipids to form mixed micelles. At phospholipid concentrations above the critical micelle concentration, melittin in any state of self-association can bind lipids. The mixed micelles formed at saturation appear to be independent of the initial state of association of melittin.     

Quantifying the effects of melittin on liposomes

Melittin, the soluble peptide of bee venom, has been demonstrated to induce lysis of phospholipid liposomes. We have investigated the dependence of the lytic activity of melittin on lipid composition. The lysis of liposomes, measured by following their mass and dimensions when immobilised on a solid substrate, was close to zero when the negatively charged lipids phosphatidyl glycerol or phosphatidyl serine were used as the phospholipid component of the liposome. Whilst there was significant binding of melittin to the liposomes, there was little net change in their diameter with melittin binding reversed upon salt injection. For the zwitterionic phosphatidyl choline the lytic ability of melittin is dependent on the degree of acyl chain unsaturation, with melittin able to induce lysis of liposomes in the liquid crystalline state, whilst those in the gel state showed strong resistance to lysis. By directly measuring the dimensions and mass changes of liposomes on exposure to melittin using Dual Polarisation Interferometry, rather than following the florescence of entrapped dyes we attained further information about the initial stages of melittin binding to liposomes.     

Quantifying the effects of melittin on liposomes

Melittin, the soluble peptide of bee venom, has been demonstrated to induce lysis of phospholipid liposomes. We have investigated the dependence of the lytic activity of melittin on lipid composition. The lysis of liposomes, measured by following their mass and dimensions when immobilised on a solid substrate, was close to zero when the negatively charged lipids phosphatidyl glycerol or phosphatidyl serine were used as the phospholipid component of the liposome. Whilst there was significant binding of melittin to the liposomes, there was little net change in their diameter with melittin binding reversed upon salt injection. For the zwitterionic phosphatidyl choline the lytic ability of melittin is dependent on the degree of acyl chain unsaturation, with melittin able to induce lysis of liposomes in the liquid crystalline state, whilst those in the gel state showed strong resistance to lysis. By directly measuring the dimensions and mass changes of liposomes on exposure to melittin using Dual Polarisation Interferometry, rather than following the florescence of entrapped dyes we attained further information about the initial stages of melittin binding to liposomes.     

Analysis of antimicrobial peptide interactions with hybrid bilayer membrane systems using surface plasmon resonance

The lipid binding behaviour of the antimicrobial peptides magainin 1, melittin and the C-terminally truncated analogue of melittin (21Q) was studied with a hybrid bilayer membrane system using surface plasmon resonance. In particular, the hydrophobic association chip was used which is composed of long chain alkanethiol molecules upon which liposomes adsorb spontaneously to create a hybrid bilayer membrane surface. Multiple sets of sensorgrams with different peptide concentrations were generated. Linearisation analysis and curve fitting using numerical integration analysis were performed to derive estimates for the association (k(a)) and dissociation (k(d)) rate constants. The results demonstrated that magainin 1 preferentially interacted with negatively charged dimyristoyl-L-alpha-phosphatidyl-DL-glycerol (DMPG), while melittin interacted with both zwitterionic dimyristoyl-L-alpha-phosphatidylcholine and anionic DMPG. In contrast, the C-terminally truncated melittin analogue, 21Q, exhibited lower binding affinity for both lipids, showing that the positively charged C-terminus of melittin greatly influences its membrane binding properties. Furthermore the results also demonstrated that these antimicrobial peptides bind to the lipids initially via electrostatic interactions which then enhances the subsequent hydrophobic binding. The biosensor results were correlated with the conformation of the peptides determined by circular dichroism analysis, which indicated that high alpha-helicity was associated with high binding affinity. Overall, the results demonstrated that biosensor technology provides a new experimental approach to the study of peptide-membrane interactions through the rapid determination of the binding affinity of bioactive peptides for phospholipids.     

Melittin-solid phospholipid mixed films trigger amyloid-like nano-fibril arrangements at air-water interface

We used the Langmuir monolayers technique to study the surface properties of melittin toxin mixed with either liquid-condensed DSPC or liquid-expanded POPC phospholipids. Pure melittin peptide forms stable insoluble monolayers at the air-water interface without interacting with Thioflavin T (Th-T), a sensitive probe to detect protein amyloid formation. When melittin peptide is mixed with DSPC lipid at 50 % of peptide area proportion at the surface, we observed the formation of fibril-like structures detected by Brewster angle microscopy (BAM), but they were not observable with POPC. The nano-structures in the melittin-DSPC mixtures became Th-T positive labeling when the arrangement was observed with fluorescence microscopy. In this condition, Th-T undergoes an unexpected shift in the typical emission wavelength of this amyloid marker when a 2D fluorescence analysis is conducted.Even when reflectivity analysis of BAM imaging evidenced that these structures would correspond to the DSPC lipid component of the mixture, the interpretation of ATR-FTIR and Th-T data suggested that both components were involved in a new lipid-peptide rearrangement. These nano-fibril arrangements were also evidenced by scanning electron and atomic force microscopy when the films were transferred to a mica support. The fibril formation was not detected when melittin was mixed with the liquid-expanded POPC lipid. We postulated that DSPC lipids can dynamically trigger the process of amyloid-like nano-arrangement formation at the interface. This process is favored by the relative peptide content, the quality of the interfacial environment, and the physical state of the lipid at the surface.     

Solid-state NMR conformational studies of a melittin-inhibitor complex

Melittin is a cytolytic peptide whose biological activity is lost upon binding to a six-residue peptide, Ac-IVIFDC-NH(2), with which it forms a highly insoluble complex. As a result, the structural analysis of the interaction between the two peptides is difficult. Solid-state NMR spectroscopy was used to study the interaction between melittin and the peptide inhibitor. Location of the binding site in the melittin-inhibitor complex was determined using lanthanide ions, which quench NMR resonances from molecular sites that are in close proximity to the unique ion binding site. Our results indicated that the inhibitor binding site in melittin is near Leu13, Leu16 and Ile17, but not near Leu6 or Val8. On the basis of these data we propose that the inhibitor binds to melittin in the vicinity of Ala15 to Trp19 and prevents insertion of melittin into cell membranes by disrupting the helical structure. Supporting evidence for this model was produced by determining the distance, using rotational resonance NMR, between the [1-(13)C] of Leu13 in melittin and the [3-(13)C] of Phe4 in the inhibitor.     

Template-assembled melittin: structural and functional characterization of a designed, synthetic channel-forming protein.

Template-assembled proteins (TASPs) comprising 4 peptide blocks, each of either the natural melittin sequence (melittin-TASP) or of a truncated melittin sequence (amino acids 6-26, melittin6-26-TASP), C-terminally linked to a (linear or cyclic) 10-amino acid template were synthesized and characterized, structurally by CD, by fluorescence spectroscopy, and by monolayer experiments, and functionally, by electrical conductance measurements on planar bilayers and release experiments on dye-loaded vesicles. Melittin-TASP and the truncated analogue preferentially adopt alpha-helical structures in methanol (56% and 52%, respectively) as in lipid membranes. Unlike in methanol, the melittin-TASP self-aggregates in water. On an air-water interface, the differently sized molecules can be self-assembled and compressed to a compact structure with a molecular area of around 600 A2, compatible with a 4-helix bundle preferentially oriented perpendicular to the interface. The proteins reveal a strong affinity for lipid membranes. A partition coefficient of 1.5 x 10(9) M-1 was evaluated from changes of the Trp fluorescence spectra of the TASP in water and in the lipid bilayer. In planar lipid bilayers, TASP molecules are able to form defined ion channels, exhibiting a small single-channel conductance of 7 pS (in 1 M NaCl). With increasing protein concentration in the lipid bilayer, additional, larger conductance states of up to 1 nS were observed. These states are likely to be formed by aggregated TASP structures as inferred from a strongly voltage-dependent channel activity on membranes of large area. In this respect, melittin-TASP reveals channel features of the native peptide, but with a considerably lower variation in the size of the channel states. Compared to the free peptide, template-assembled melittin has a much higher membrane activity: it is about 100 times more effective in channel formation and 20 times more effective in releasing dye molecules from lipid vesicles. This demonstrates that the lytic properties are not solely related to channel formation.     

Influence of lipid chain unsaturation on membrane-bound melittin: a fluorescence approach

Melittin, a cationic hemolytic peptide, is intrinsically fluorescent due to the presence of a single functionally important tryptophan residue. The organization of membrane-bound melittin is dependent on the physical state and composition of membranes. In particular, polyunsaturated lipids have been shown to modulate the membrane-disruptive action of melittin. Phospholipids with polyunsaturated acyl chains are known to modulate a number of physical properties of membranes and play an important role in regulating structure and function of membrane proteins. In this study, we have used melittin to address the influence of unsaturated lipids in modulating lipid-protein interactions. Our results show that fluorescence parameters such as intensity, emission maximum, polarization, lifetime and acrylamide quenching of melittin incorporated in membranes are dependent on the degree of unsaturation of lipids in membranes. Importantly, melittin in membranes composed of various unsaturated lipids shows red edge excitation shift (REES) implying that melittin is localized in a motionally restricted region in membranes. The extent of REES was found to increase drastically in membranes with increasing unsaturation, especially when the lipids contained more than two double bonds. In addition, increasing unsaturation in membranes causes a considerable change in the secondary structure of membrane-bound melittin. Taken together, our results assume significance in the overall context of the role of unsaturated lipids in membranes in the organization and function of membrane proteins and membrane-active peptides.