Bipolar anastomosis technique with removable instruments: an easy, fast, and reliable technique for vascular anastomosis

The interrupted suture technique is most commonly used for microsurgical vascular anastomosis. For several reasons (e.g., exposure of suture material to blood, time needed), many attempts have been made to find other solutions. This article describes a new means of performing a microsurgical vascular anastomosis. The aim of this study was to show the feasibility and possible advantages of this new technique. The basic components at work here are a modified cuff and electrically generated heat used to unite the vessel walls. In this way, both endothelial layers are adapted without manipulating the inside of the vessel or leaving behind foreign matter. Various energy/coagulation time settings were used to perform arterial anastomoses (n = 42) in an isogeneic abdominal aorta interposition model in the rat. The quality of anastomosis was evaluated at days 1, 10, 21, and 120. Immediately after the welding process all anastomoses (n = 42) were patent. No stenosis was found at any observation time. Anastomosis time ranged from 3 to 18 minutes (average, 11 minutes). This new technique permits a vascular anastomosis to be performed easily and reliably with a high patency rate. With this technique, the authors are convinced that a skilled surgeon can create a high-quality anastomosis in a fraction of the time needed to sew an anastomosis.     

大鼠颈总动脉端-侧吻合模型的建立

目的建立大鼠颈总动脉端-侧吻合模型,以期对欲进行显微血管吻合训练或相关实验的同道提供帮助。方法成年SD大鼠10只,将左侧颈总动脉远端穿过颈前肌肉群和气管之间的隧道,与右侧颈总动脉行端-侧吻合。结果成功建立大鼠颈总动脉端-侧血管吻合动物模型,手术成功率约为100%,平均吻合所需8针,平均血管吻合所需时间(35±5)min。吻合3个月后观察通畅率100%,HE染色示吻合口愈合良好。结论吻合成功的关键是提高显微操作技术水平,同时注意保护术野中小的血管和神经。此模型可以较好的应用于显微血管缝合训练。     

Sutureless microvascular anastomoses by a biodegradable laser-activated solid protein solder.

A new sutureless technique to successfully anastomose the abdominal aorta of rats (1.3 mm in diameter) by using a fully biodegradable, laser-activated protein solder is presented. A total of 90 rats were divided into two groups randomly. In group one, the anastomoses were performed by using conventional microsuturing technique, whereas in group two, the anastomoses were performed by using a new laser welding technique. In addition, each of the two groups were divided into five subgroups and evaluated at different follow-up periods (10 minutes, 1 hour, 1 day, 1 week, and 6 weeks). At these intervals, the anastomoses were evaluated for patency and tensile strength. Three anastomoses in each subgroup were processed for light and electron microscopy. All anastomoses were found to be patent. The mean clamp time of the anastomoses performed with conventional suturing was 20.6 minutes compared with 7.2 minutes for the laser-activated welded anastomoses (p < 0.001). The strain measurements showed a stronger mechanical bond of the sutured anastomoses in the initial phase. However, at 6 weeks the tensile strength of the laser-welded anastomoses was higher compared with the conventional suture technique. Histologic evaluations revealed a near complete resorption of the solder after 6 weeks. The junction site of the vessel ends cannot be determined on the luminal side of the artery. In conclusion, a resorbable protein used as a solder, activated by a diode laser, can provide a reliable, safe, and rapid arterial anastomosis, which could be performed by any microsurgeon faster than conventional suturing after a short learning curve.     

Further technical considerations of the sleeve microanastomosis

In sleeve anastomoses, stenoses at the suture site have been the main concern. Mechanical dilatation is one way to prevent the stenosis, as suggested by Lauritzen. In the present study, 50 vessels (femoral and carotid) and 10 veins were used for sleeve anastomoses and the same numbers of vessels were used for conventional anastomoses (as control) to evaluate the effect of mechanical dilatation using resin corrosion cast (Mercox) because the Mercox cast facilitates three-dimensional stereoscopic views. Gradual dilatations around the suture sites were observed in seven carotid arteries, and three of seven resulted into aneurysm formation due to weakening of the inner vascular wall in the sleeve anastomosis. No dilatation or aneurysm was observed in the femoral arteries. Newly proliferating capillaries formed on the endothelial surfaces of the inner vascular walls around the suture sites after 4 weeks in the sleeve anastomoses. Operative time and endothelial trauma were markedly reduced with sleeve anastomoses. The gradual dilatation and aneurysm formation in the carotid arteries show that sleeve anastomoses should be used carefully for high-pressure arteries in clinical practice if mechanical dilatation is performed.     

Thrombosis of microvascular anastomoses in traumatized vessels: fibrin versus platelets

Thrombosis is the end result of two closely interrelated processes: the coagulation cascade and the platelet aggregation process. To determine their relative contribution, we used pharmacologic agents that selectively block each process. The specific effect of each pharmacologic agent on either fibrin deposition or platelet activity was confirmed morphologically by scanning electron microscopy and was substantiated with ADP-induced platelet aggregation and blood clotting time determinations. Forty-two rats had both femoral arteries subjected to a standardized crush-avulsion injury. A total of 84 femoral microvascular anastomoses were subsequently performed. None of the 24 control anastomoses treated with saline remained patent, whereas 6 of 24 of the anastomoses treated with dazmagrel (a selective thromboxane synthetase and platelet aggregation inhibitor), 2.5 mg/kg IV, remained patent and 18 of 24 of those treated with a single dose of heparin, 200 U/kg IV, remained patent. All 12 anastomoses treated with both drugs remained patent but developed a 33 percent hematoma rate. We conclude that in this microvascular model, fibrin mesh deposition is a more significant factor than platelet aggregation in the pathogenesis of occlusional thrombosis within traumatized arteries. Its temporary inhibition with a single dose of heparin yielded a 75 percent improvement in patency rate.     

Testing of a new prototype surgical stapler that automates the rollover sleeve technique for venous anastomoses

The creation of successful vascular anastomoses is of primary importance in many surgical fields. Numerous attempts to automate this process have been made. These techniques have slowly gained acceptance, but their use is still limited. This report details feasibility testing of a new prototype stapler that automates the rollover sleeve technique for venous vascular anastomoses. Male and female mongrel dogs (n=7) (25-32 kg) were used. A segment of the right (n=5) or left (n=2) iliac vein was harvested for interposition grafts after the contra lateral side was transected. In each dog, two end-to-end venous anastomoses at the interposition grafts were performed. The standard anastomosis employed continuous mattress sutures. The experimental anastomosis was performed with a new prototype surgical stapler. The stapled anastomosis was proximal and the sutured was distal. In all experiments, it was possible to perform the experimental anastomosis with the stapler. Complications included two small leaks, one due to misfiring of a single pin in one experimental site. These leaks required suture reinforcement. One dog died of hemorrhage due to a slipped suture at the vein harvest site. One vein had thrombus seen at the sutured site although no technical abnormalities at either of the anastomoses could be found. After two weeks, grafts were inspected grossly and histologically. Healing appeared normal. There was a trend for less inflammatory cells infiltrating stapled sites; however, this was not statistically significant. The experiments demonstrate that this device can automate the rollover sleeve technique for venous anastomoses.     

Video microsurgery: evaluation of standard laparoscopic equipment for the practice of microsurgery

Traditional microsurgery involves the use of bulky and expensive stereo microscopes that have limited portability. Recent advances in video technology have enabled the exploration of alternative visualization methods. The purpose of this study was to evaluate standard laparoscopic equipment for microvascular anastomoses. Eight surgeons completed anastomoses on rat femoral and synthetic vessels using stereo microsurgery and video microsurgery visualization systems. All surgeons had previous experience with stereo microsurgery and none had ever used video microsurgery. Data were collected on overall anastomosis and individual suture times. A sample of completed anastomoses was placed in a video database and evaluated by use of a quality rating scale (8 to 10, excellent; 6 to 7, adequate; less than 6, poor). All surgeons subjectively evaluated the video microsurgery system. A total of 48 anastomoses were completed. The average total anastomosis time for the stereo microsurgery was 1018.9 +/- 463.2 seconds versus 1738.9 +/- 460.1 seconds for the video microsurgery. The average individual suture placement time was 114.6 +/- 60.6 seconds for the stereo microsurgery versus 211.7 +/- 128.4 seconds for the video microsurgery (p < 0.05). Twenty-five of the anastomoses underwent quality review. The overall score of the stereo microsurgery group was 8.1 +/- 1.7, and the video microsurgery group had an overall score of 7.3 +/- 1.6. Survey results revealed that 75 percent of the participants thought that the video microsurgery would be useful for human operations and would improve surgeon comfort, but 87.5 percent would not use the present video microsurgery system over stereo microsurgery in their practice. Although significant differences exist in overall anastomosis and individual suture completion times, no difference was found in the overall quality. Video microsurgery could become a useful tool on the basis of surgeon ergonomics; however, optical parameters require further refinement.     

The role of emergent exploration in free-tissue transfer: a review of 150 consecutive cases

One-hundred and fifty consecutive free-tissue transfers were reviewed to evaluate the role of emergent exploration in flap survival. Eleven flaps exhibited signs of circulatory failure between 1 hour and 6 days postoperatively and required return to the operating room. In eight patients the preoperative diagnosis was venous thrombosis, and in three patients it was arterial thrombosis. The average time from the first abnormal examination to exploration was 1.5 hours. There were no false-positive explorations. All 11 flaps were salvaged following correction of the cause of circulatory compromise. In eight patients this was due to inflow or outflow obstruction in the recipient vessels proximal to the anastomosis, in two patients it was due to extrinsic compression of the flap from a tight wound closure, and in one patient it was due to obstruction of the recipient vein by a drain. Primary anastomotic thrombosis was not encountered as the cause of circulatory compromise in any patient. An aggressive approach to exploration was responsible for an increase in flap survival in the entire series from 90 to 98 percent. The results of this study demonstrate the efficacy of clinical monitoring, the role of early exploration, and the durability of microvascular anastomoses.     

Anastomosis of vessels of unequal diameter using an interpositional vein graft

In this study, 100 rabbits were used to assess the efficacy of five different methods of microvascular anastomosis where a vessel diameter discrepancy of 5:1 existed. The inferior vena cava of the rabbit was used as a graft in the femoral artery. In 50 percent of the rabbits the graft was reversed to assess the effects on flow. When explored between 7 and 10 days after anastomosis, an overall patency rate of 96 percent was recorded. Three grafts were not patent in the reversed group and one was not patent in the nonreversed group. There was no significant statistical difference in patency rates between any of the groups, as calculated by the Fisher's exact probability test. The tapered end-to-end and side-to-end anastomoses were found to be the most rapid and simplest methods to perform.     

The relationship between the number of sutures and the strength of microvascular anastomoses.

The relative strengths of microvascular anastomoses in rat femoral arteries were measured, comparing controls (no anastomosis) to those with 4, 6, 8, 10, 12, and 14 stitches. The ones in which 8 sutures were used most closely paralleled the control state, whereas those with 4 or 6 sutures were clearly inferior. With a greater number of sutures the vessel behaves as a "shorter" vessel, with the anastomosis becoming the weakest part of the vessel.     

Use of the vascular closure staple clip applier for microvascular anastomosis in free-flap surgery

We report our initial experience using the vascular closure staple clip applier (a nonpenetrating titanium clip applied in an interrupted, everting fashion) for microvascular anastomosis in free-flap surgery. In total, 153 anastomoses were performed in 87 free flaps (174 potential anastomoses) using the vascular closure stapler between October of 1997 and June of 1999. In 66 flaps, both the arterial and venous anastomosis were performed with the clip applier, whereas in 21 flaps only the venous anastomosis was performed using the clips. A total of 146 anastomoses were performed in an end-to-end fashion, and seven were performed end-to-side. Of the 87 flaps there were 53 TRAM flaps, seven bilateral TRAM, five latissimus dorsi, four gastrocnemius, three rectus abdominis, two radial forearm fibula, and four Rubens fat-pad flaps. Seventy flaps were used for breast reconstruction, seven flaps for lower limb reconstruction, four flaps for head and neck reconstruction, and six flaps for chest wall/trunk reconstruction. There were no postoperative anastomotic complications of bleeding, thrombosis, or need for revision (100 percent patency rate), with a significantly reduced time for completion of anastomoses. The clip applier is a safe, reliable method for performing microvascular anastomoses, allowing reduced operating time and possible cost savings in free-flap surgery.     

Morphological evaluation of reconstructive operations on the bronchi using a microsurgical technic in an experiment

Morphological study of bronchial anastomoses repair made with or without microsurgical techniques has been performed in 30 mongrel dogs. Comparative analysis of bronchoscopy, microscopy and scanning electronic microscopy data shows earlier epithelialization, more regular conjunction of bronchial tube and less marked inflammation in anastomosis made with microsurgical techniques. The fact may be explained by a less pronounced traumatization of bronchial tissues with microinstruments and also by tight suture of mucosal layer which creates favourable conditions for repair of anastomosis per primam.     

Mechanical anastomosis of small arteries and veins with the unilink apparatus: a histologic and scanning electron microscopic study

A new method for mechanical anastomosis of small vessels--the Unilink device--has been tested in 23 rabbits. A total of 81 arterial and venous anastomoses were performed. One of the arterial anastomoses were thrombotized, while the remaining 80 anastomoses were fully patent at 2 or 16 weeks. The repair process at the anastomotic site was very rapid both in arteries and veins. The endothelialization was complete at 2 weeks, but a marked atrophy of the media was noted in the arterial anastomoses. The same phenomenon was observed in the venous anastomosis, but to a much lesser degree. Thrombus formation was extremely rare, and the atrophy of the media did not seem to affect the patency rate. The experiment has confirmed that the Unilink method provides a very safe, fast, and simple way to perform microvascular anastomoses.     

Eversion with four sutures: an easy, fast, and reliable technique for microvascular anastomosis

In this study, a microvascular anastomosing technique called "eversion with four sutures" is introduced. For microvascular anastomosis, this technique requires fishmouth incisions at both vessel ends and the completion of four sutures. In 120 Wistar-Albino rats, 120 eversion and 120 conventional anastomoses were done in 240 femoral arteries. Each rat received both treatments. Operating time, bleeding time, number of sutures used, patency rates, and pseudoaneurysm formation were analyzed statistically; healing was evaluated with both light and electron microscopy. When compared with the conventional technique using nine sutures, the eversion with four sutures technique was found to be a faster and easier method of anastomosis and as reliable as the conventional technique. Without compromising patency rates, bleeding time, or rates of pseudoaneurysm formation, anastomosis time and amount of suture material exposed to the lumen were significantly reduced when using this technique. In conclusion, the authors think that eversion with four sutures is a reliable alternative to the conventional suturing technique, especially for emergency cases that require multiple microvascular anastomoses.     

Orthotopic Kidney Transplantation in Mice: Technique Using Cuff for Renal Vein Anastomosis

Mouse renal transplantation is a technically challenging procedure. Although the first kidney transplants in mice were performed over 34 years ago and refined some years later, the classical techniques of mouse renal transplantation required clamping both vena cava and aorta simultaneously and carry out suture anastomoses of the renal artery and vein in a heterotopic position. In our laboratory, we have successfully developed mouse orthotopic kidney transplantation for the first time, using a rapid “cuffed” renal vein technique for vessel anastomosis, wherein the donor’s renal vein was inserted through an intravenous catheter, folded back and tied. During grafting, the cuffed renal vein was directly inserted into the recipient’s renal vein without the need for the clamping vena cava and suturing of renal vein. This technique allowed for the exact transplantation of the kidney into the original position, compared to the classical technique, and has significantly shortened the clamping time due to a quicker and precise anastomosis of renal vein as described. This also allowed for a quicker recovery of the lower extremity activity, reduction in myoglobinuria with resultant kidney graft survival of 88.9%. Thus we believe that the cuffed renal vein technique simplifies microvascular anastomoses and affords important additional benefits.     

A functional model of microvascular thrombosis

A new model of microvascular thrombosis is presented, with the evaluation of single-dose heparin in the prevention of microvascular thrombosis. The technique, which involves arterial crushing and an arteriotomy with intimal abrasion, was performed on the superficial femoral artery of the rat. The model was applied to a series of 30 consecutive rat superficial femoral arteries. A 100 percent thrombosis rate was seen immediately and at 24 hours in 10 nonheparinized animals. An operator control group of 10 vessels without intimal abrasion had a patency rate of 100 percent immediately and at 24 hours. Ten vessels following single-dose heparin and intimal abrasion were all patent initially, with 7 remaining patent at 24 hours. Reproducibility of the model was documented by a second operator with similar results. Utilizing this model, single-dose heparin was effective in maintaining vessel patency.     

Experimental studies in animals on the use of a fibrin glue from the human plasma fraction Cohn I in nerve reconstruction

In order to compare the effects of suture and glue direct nerve connections and nerve transplantations in the sciatic nerve in rats were performed. 4, 6 and 12 weeks later, the nerve anastomosis were histologically studied. In the direct nerve connections, despite a single holding suture, dehiscences were frequently detected with the penetration of the adhesive between the nerve ends. Due to the exact adaptation with the aid of inserted nerve grafts, the anastomoses could be repaired sutureless successfully using a fibrin glue cuff. Since histologically, in comparison to suture, no foreign body granulomas were found, the findings in the literature could be confirmed. No cicatricial contractions of the anastomoses could be found. In the interfascicular nerve transplantation, comparatively good results may be obtained using the two-component adhesive on the Cohn I-fraction basis.     

Side-to-End Lymphaticovenular Anastomosis through Temporary Lymphatic Expansion

Objective

The number of bypasses is the most important factor in lymphaticovenular anastomosis (LVA) for lymphedema treatment. Side-to-end (S-E) LVA, which can bypass bidirectional lymph flows via one anastomosis, is considered to be the most efficient bypass, but creation of lateral window to a small lymphatic vessel is technically demanding. To overcome the difficulty, we introduced S-E anastomosis through temporary lymphatic expansion (SEATTLE) procedure in S-E LVA.

Methods

This was a retrospective observational study set in a teaching hospital. Forty eight lower extremity lymphedema (LEL) patients underwent LVA. S-E LVAs were performed with (SEATTLE group) or without (non-SEATTLE group) temporary lymphatic expansion. S-E LVAs were evaluated to compare anastomosis result in SEATTLE and non-SEATTLE groups.

Results

S-E LVAs resulted in 44 anastomoses in SEATTLE group (n = 25) and 37 anastomoses in non-SEATTLE group (n = 23). LEL index reduction in SEATTLE group was significantly greater than that in non-SEATTLE group (16.5±14.5 vs. 10.9±11.8, P = 0.041). Success rate of S-E LVA in SEATTLE group was significantly higher than that in non-SEATTLE group (95.5% vs 81.1%, P = 0.040). Thirty seven of 44 (84.1%) lymph vessels in SEATTLE group were successfully dilated by temporary lymphatic expansion maneuver. All of 9 failed S-E LVAs used a lymphatic vessel with diameter of 0.35 mm or smaller.

Conclusions

The SEATTLE procedure facilitates S-E LVA by a simple and easy maneuver. When the diameter of the lymphatic vessel is 0.35 mm or smaller even after the temporary lymphatic expansion maneuver, S-E LVA is not recommended due to relatively high failure rate.     

MEMS-Based Handheld Fourier Domain Doppler Optical Coherence Tomography for Intraoperative Microvascular Anastomosis Imaging

Purpose

To demonstrate the feasibility of a miniature handheld optical coherence tomography (OCT) imager for real time intraoperative vascular patency evaluation in the setting of super-microsurgical vessel anastomosis.

Methods

A novel handheld imager Fourier domain Doppler optical coherence tomography based on a 1.3-µm central wavelength swept source for extravascular imaging was developed. The imager was minimized through the adoption of a 2.4-mm diameter microelectromechanical systems (MEMS) scanning mirror, additionally a 12.7-mm diameter lens system was designed and combined with the MEMS mirror to achieve a small form factor that optimize functionality as a handheld extravascular OCT imager. To evaluate in-vivo applicability, super-microsurgical vessel anastomosis was performed in a mouse femoral vessel cut and repair model employing conventional interrupted suture technique as well as a novel non-suture cuff technique. Vascular anastomosis patency after clinically successful repair was evaluated using the novel handheld OCT imager.

Results

With an adjustable lateral image field of view up to 1.5 mm by 1.5 mm, high-resolution simultaneous structural and flow imaging of the blood vessels were successfully acquired for BALB/C mouse after orthotopic hind limb transplantation using a non-suture cuff technique and BALB/C mouse after femoral artery anastomosis using a suture technique. We experimentally quantify the axial and lateral resolution of the OCT to be 12.6 µm in air and 17.5 µm respectively. The OCT has a sensitivity of 84 dB and sensitivity roll-off of 5.7 dB/mm over an imaging range of 5 mm. Imaging with a frame rate of 36 Hz for an image size of 1000(lateral)×512(axial) pixels using a 50,000 A-lines per second swept source was achieved. Quantitative vessel lumen patency, lumen narrowing and thrombosis analysis were performed based on acquired structure and Doppler images.

Conclusions

A miniature handheld OCT imager that can be used for intraoperative evaluation of microvascular anastomosis was successfully demonstrated.     

肿瘤局部切除加^125I残瘤间植入治疗肝门部胆管癌

目的：探讨晚期肝门部胆管癌的治疗方法。方法：肝门部胆管癌9例,肿瘤局部切除,胆肠吻合,吻合口后壁采用血管吻合线无创吻合,残余肿瘤^125I组织间植入持续、精确、适形的放射治疗。结果：所有患者术后恢复良好,黄疸于1-2月后基本消退,未出现胆漏及胆管炎等并发症,随访2-18月,全部存活。结论：肝门部胆管癌肿瘤局部切除,胆肠吻合时后壁采用血管吻合线吻合,可以简化手术;^125I组织间植入治疗残余肿瘤安全,有效,操作简单,对于胆管癌行肿瘤姑息性切除者,可降低术后复发,提高生存率。