Light-induced electron-transfer reactions. Part 2. Kinetics of the intra-molecular redox decomposition of tris(oxalato)-cobaltate(III) by irradiation with visible light of aqueous solution containing tris(2,2′-bipyridine)ruthenium(II) ion

The rate of the intra-molecular redox decomposition of the tris(oxalato)cobaltate(III) ion [Co(Ox)₃]^3? is greatly accelerated by irradiation with visible light of aqueous acidic solutions containing the tris(2,2′-bipyridine)ruthenium(II) ion [Ru(bpy)₃]²⁺. The rate of the light-induced reaction in hydrochloric acid with an acidity range 0.05–0.18 mol dm^?3 is of zero-order with respect to the [Co(Ox)₃]^3? ion concentration and is proportional to the light-intensity irradiated and also essentially to the [Ru(bpy)₃]²⁺ ion concentration. Moreover, the rate is independent not only of the oxalate ion concentrations, but also of the acidity over the range 0.05–0.18 mol dm^?3 hydrochloric acid. The ionic-strength dependence, as well as temperature dependence, were extremely small. The [Ru(bpy)₃]²⁺ concentration does not change during the occurrence of the reaction and the tris(2,2′-bipyridine)ruthenium(II) ion acts as a homogeneous catalyzer. However, a dramatic indication that the situation was rather different was found in the stronger acid solutions of 0.5 or 1.0 mol dm^?3 hydrochloric acid, in which the [Ru(bpy)₃]²⁺ concentration decreased greatly immediately after the initiation of reaction and then increased up to the initial concentration. Such a decrease at the initial stage of the reaction disappeared by addition of oxalate before the start of the reaction. A chain mechanism of reaction is proposed to account for these results.     

Photoinduced oxidation of a tris(2,2'‐bipyridyl)ruthenium(II)–peroxodisulfate chemiluminescence system for the analysis of mebeverine HCl pharmaceutical formulations and biological fluids using a two‐chip device

A new method for the analysis of mebeverine hydrochloride (MEB) has been developed using a two‐chip device. The method is highly selective, sensitive, rapid and consumes minute amount of reagents. The developed method is free of interference from the degradation products of MEB and from common ingredients present in pharmaceutical formulations. The limit of detection was 0.043 µg/mL, and the limit of quantification was 0.138 µg/mL. The short analysis time per sample (20 s) allowed a large number of analyses to be performed within a very short time. Various samples were analyzed, including two different pharmaceutical formulations and a uniformity of content analysis for 20 tablets from a known batch and two biological samples at different concentrations. In addition, the method was compared with a validated high‐performance liquid chromatography (HPLC) method and the results clearly indicated the suitability of the developed method for routine analyses. A new mechanism for the tris(2,2'‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺)‐peroxodisulfate (S₂O₈^2?) chemiluminescence (CL) system has also been proposed. The mechanism is based on photoinduced oxidation of Ru(bpy)₃²⁺ to Ru(bpy)₃³⁺ via the formation of Ru(bpy)₃²⁺* upon irradiation with visible light. S₂O₈^2? then oxidizes Ru(bpy)₃²⁺* to Ru(bpy)₃³⁺ and the analyte subsequently reduces the resultant Ru(bpy)₃³⁺ to Ru(bpy)₃²⁺*, which then produces the CL signal. Copyright © 2013 John Wiley & Sons, Ltd.     

Heterometallic complex formation on p-sulfonatothiacalix[4]arene platform resulting in pH- and redox-modification of [Ru(bpy)3] luminescence

The pH-dependent heterometallic complex formation with p-sulfonatothiacalix[4]arene (TCAS) as bridging ligand in aqueous solutions was revealed by the use of spectrophotometry, nuclear magnetic relaxation and fluorimetry methods. The novelty of the structural motif presented is that the appendance of emission metal center ([Ru(bpy)₃]²⁺) is achieved through the cooperative non-covalent interactions with the upper rim of TCAS. The second metal block (Fe(III), Fe(II) and Mn(II)), bound with the lower rim of TCAS in the inner sphere coordination mode is serving as quencher of [Ru(bpy)₃]²⁺ emission. The difference between the complex ability of Fe(III) and Fe(II) ions provides pH conditions for redox-dependent emission of [Ru(bpy)₃]²⁺.     

Chemiluminescence selectivity enhancement in the on‐chip Ru(bpy)32+ system: The potential role of buffer type and pH in the determination of hydrochlorothiazide in combined formulations and human plasma

A simple and highly selective on‐chip Ru(bpy)₃²⁺–oxidant chemiluminescence (CL) approach for estimation of a diuretic drug, hydrochlorothiazide (HCZ), in biological fluids was realized in the presence of other fixed‐dose combination drugs by manipulating simultaneously the method of active species (Ru(bpy)₃³⁺) production and type of carrier buffer with pH used for the CL reaction. Chemical oxidation processes involved in the Ru(bpy)₃²⁺–Ce(IV) CL system have been successfully miniaturised in this study using a microfabricated device to generate Ru(bpy)₃³⁺ instantaneously. The proposed system was then screened using HCZ and other drugs in the presence of various buffers and pH to explore the difference in CL emission. Ammonium formate buffer (0.15 M) at pH 4.5 exhibited excellent selectivity towards HCZ when Ru(bpy)₃³⁺ was produced by chemical oxidation using Ce(IV). The newly developed conditions do not involve any kind of prior separation or isolation procedure to remove other combination therapy drugs in formulation and biological samples. The method under fully optimised conditions exhibited wide linearity over the concentration range 0.5–1000 ng ml^?1 and low detection and quantification limits of 0.13 and 0.47 ng ml^?1 respectively for HCZ. Acceptable levels of recoveries were obtained for HCZ from human plasma using the proposed method (98.9–100.8%) in the presence of other antihypertensive combination therapy drugs. This study postulates that such miniaturised devices may find applications especially for on‐site analysis, such as doping control examinations.     

Mixed-ligand complexes of ruthenium(II) containing new photoactive or electroactive ligands: synthesis, spectral characterization and DNA interactions

Mixed-ligand ruthenium(II) complexes of three photoactive ligands, viz., (E)-1-[2-(4-methyl-2-pyridyl)-4-pyridyl]-2-(1-naphthyl)-1-ethene (mppne), (E)-1-(9-anthryl)-2-[2-(4-methyl-2-pyridyl)-4-pyridyl]-1-ethene (mppae) and (E)-1-[2-(4-methyl-2-pyridyl)-4-pyridyl]-2-(1-pyrenyl)-1-ethene (mpppe), in which a 2,2′-bipyridyl unit is linked via an ethylinic linkage to either a naphthalene, an anthracene or a pyrene chromophore and three electroactive ligands, viz., 4-(4-pyridyl)-1,2-benzenediol (catpy), 5,6-dihydroxy-1,10-phenanthroline (catphen) and 1,2-benzenediol (cat), were synthesized in good to moderate yields. Complexes [Ru(bpy)₂(mppne)]²⁺ (bpy is 2, 2′–bipyridyl), [Ru(bpy)₂(mppae)]²⁺, [Ru(bpy)₂(mpppe)]²⁺, [Ru(bpy)₂(sq-py)]⁺, [Ru(bpy)₂(sq-phen)]⁺ and [Ru(phen)₂(bsq)]⁺ (phen is 1,10-phenanthroline) were fully characterized by elemental analysis, IR, ¹H NMR, fast-atom bombardment or electron-impact mass, UV–vis and cyclic voltammetric methods. In the latter three complexes, the ligands catpy, catphen and cat are actually bound to the metal center as the corresponding semiquinone species, viz., 4-(4-pyridyl)-1,2-benzenedioleto(+I) (sq-py), 1,10-phenanthroline-5,6-dioleto(+I) (sq-phen) and 1,2-benzenedioleto(+I) (bsq), thus making the overall charge of the complexes formally equal to + 1 in each case. These three complexes are electron paramagnetic resonance active and exhibit an intense absorption band between 941 and 958 nm owing to metal-to-ligand charge transfer (MLCT, d _Ru→π*_sq) transitions. The other three ruthenium(II) complexes containing three photoactive ligands, mppne, mppae and mpppe, exhibit MLCT (d _Ru→π*_bpy ) bands in the 454–461-nm region and are diamagnetic. These can be characterized by the ¹H NMR method. [Ru(bpy)₂(mppne)]²⁺, [Ru(bpy)₂(mppae)]²⁺ and [Ru(bpy)₂(mpppe)]²⁺ exhibit redox waves corresponding to the Ru^III/Ru^II couple along with the expected ligand (bpy and substituted bpy) based ones in their cyclic and differential pulse voltammograms (CH₃CN, 0.1 M tetrabutylammonium hexafluorophosphate)—corresponding voltammograms of [Ru(bpy)₂(sq-py)]⁺, [Ru(bpy)₂(sq-phen)]⁺ and [Ru(phen)₂(bsq)]⁺ are mainly characterized by waves corresponding to the quinone/semiquinone (q/sq) and semiquinone/1,2-diol (sq/cat) redox processes. The results of absorption and fluorescence titration as well as thermal denaturation studies reveal that [Ru(bpy)₂(mppne)]²⁺ and [Ru(bpy)₂(mppae)]²⁺ are moderate-to-strong binders of calf thymus DNA with binding constants ranging from 10⁵ to 10⁶ M⁻¹. Under the identical conditions of drug and light dose, the DNA (supercoiled pBR 322) photocleavage activities of these two complexes follow the order:[Ru(bpy)₂(mppne)]²⁺>[Ru(bpy)₂(mppae)]²⁺, although the emission quantum yields follow the reverse order. The other ruthenium(II) complexes containing the semiquinone-based ligands are found to be nonluminescent and inefficient photocleavage agents of DNA. However, experiments shows that [Ru(bpy)₂(sq)]⁺-based complexes oxidize the sugar unit and could be used as mild oxidants for the sugar moiety of DNA. Possible explanations for these observations are presented.Electronic Supplementary Material Supplementary material is available for this article at .     

Electrochemiluminescence observing the surface features of Ru‐doped silica nanoparticles based on nanoparticle–ultramicroelectrode collision

We present an innovative and sensitive electrogenerated chemiluminescence (ECL) strategy for observing the surface feature of a single silica nanoparticle based on its collision with an ultramicroelectrode (UME). As an ECL luminophore, Ru(bpy)₃²⁺ molecules are doped into silica nanoparticles. The stochastic collision events of Ru(bpy)₃²⁺‐doped silica nanoparticles (RuSNPs) can be tracked by observing the ECL ‘blips’ from the ECL reaction of Ru(bpy)₃²⁺ with a coreactant in solution. When RuSNPs collided with UME, Ru(bpy)₃²⁺ molecules that only exist near the collision site of silica nanoparticles (NPs) were electrochemically oxidized to form Ru(bpy)₃³⁺, and then emitted light, because silica NPs are insulated. The inhomogeneous properties of silica nanoparticle surfaces will produce diverse ECL blips in intensity and shape. In addition, distribution gradients from the he Ru(bpy)₃²⁺ in a silica matrix also affect ECL blips. Some information on the surface properties of silica NPs can be obtained by observation of single silica collision events.     

Variation of DNA photocleavage efficiency for [(TL)2Ru(dpp)]Cl2 complexes where TL = 2,2′-bipyridine, 1,10-phenanthroline, or 4,7-diphenyl-1,10-phenanthroline

The complexes [(bpy)₂Ru(dpp)]Cl₂, [(phen)₂Ru(dpp)]Cl₂, and [(Ph₂phen)₂Ru(dpp)]Cl₂ (where dpp = 2,3-bis(2-pyridyl)pyrazine, bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline, Ph₂phen = 4,7-diphenyl-1,10-phenanthroline) have been investigated and found to photocleave DNA via an oxygen-mediated pathway. These light absorbing complexes possess intense metal-to-ligand charge transfer (MLCT) transitions in the visible region of the spectrum. The [(TL)₂Ru(dpp)]²⁺ systems populate ³MLCT states after visible light excitation, giving rise to emissions in aqueous solution centered at 692, 690, and 698 nm for TL = bpy, phen, and Ph₂phen respectively. The ³MLCT states and emissions are quenched by O₂, producing a reactive oxygen species. These complexes photocleave DNA with varying efficiencies, [(Ph₂phen)₂Ru(dpp)]²⁺ > [(phen)₂Ru(dpp)]²⁺ > [(bpy)₂Ru(dpp)]²⁺. The presence of the polyazine bridging ligand will allow these chromophores to be incorporated into larger supramolecular assemblies.     

Multicopper oxidase involvement in both Mn(II) and Mn(III) oxidation during bacterial formation of MnO2

Global cycling of environmental manganese requires catalysis by bacteria and fungi for MnO₂ formation, since abiotic Mn(II) oxidation is slow under ambient conditions. Genetic evidence from several bacteria indicates that multicopper oxidases (MCOs) are required for MnO₂ formation. However, MCOs catalyze one-electron oxidations, whereas the conversion of Mn(II) to MnO₂ is a two-electron process. Trapping experiments with pyrophosphate (PP), a Mn(III) chelator, have demonstrated that Mn(III) is an intermediate in Mn(II) oxidation when mediated by exosporium from the Mn-oxidizing bacterium Bacillus SG-1. The reaction of Mn(II) depends on O₂ and is inhibited by azide, consistent with MCO catalysis. We show that the subsequent conversion of Mn(III) to MnO₂ also depends on O₂ and is inhibited by azide. Thus, both oxidation steps appear to be MCO-mediated, likely by the same enzyme, which is indicated by genetic evidence to be the MnxG gene product. We propose a model of how the manganese oxidase active site may be organized to couple successive electron transfers to the formation of polynuclear Mn(IV) complexes as precursors to MnO₂ formation.     

The effects of structural variations of thiophene-containing Ru(II) complexes on the acid–base and DNA binding properties

A phenylthiophenyl-bearing Ru(II) complex of [Ru(bpy)₂(Hbptip)](PF₆)₂ {bpy?=?2,2′-bipyridine, Hbptip?=?2-(4-phenylthiophen-2-yl)-1H-imidazo[4,5-f][1,10]phenanthroline} was synthesized and characterized by elemental analysis, ¹H NMR spectroscopy, and electrospray ionization mass spectrometry. The ground- and excited-state acid–base properties of the complex were studied by UV–visible absorption and photoluminescence spectrophotometric pH titrations and the negative logarithm values of the ground-state acid ionization constants were derived to be pK _a1?=?1.31?±?0.09 and pK _a2?=?5.71?±?0.11 with the pK _a2 associated deprotonation/protonation process occurring over 3 pK _a units more acidic than thiophenyl-free parent complex of [Ru(bpy)₂(Hpip)]²⁺ {Hpip?=?2-phenyl-1H-imidazo[4,5-f][1,10]phenanthroline}. The calf thymus DNA-binding properties of [Ru(bpy)₂(Hbptip)]²⁺ in Tris–HCl buffer (pH 7.1 and 50?mM NaCl) were investigated by DNA viscosities and density functional theoretical calculations as well as UV–visible and emission spectroscopy techniques of UV–visible and luminescence titrations, steady-state emission quenching by [Fe(CN)₆]^4?, DNA competitive binding with ethidium bromide, DNA melting experiments, and reverse salt effects. The complex was evidenced to bind to the DNA intercalatively with binding affinity being greater than those for previously reported analogs of [Ru(bpy)₂(Hip)]²⁺, [Ru(bpy)₂(Htip)]²⁺, and [Ru(bpy)₂(Haptip)]²⁺ {Hip?=?1H-imidazo[4,5-f][1,10]phenanthroline, Htip?=?2-thiophenimidazo[4,5-f][1,10]phenanthroline, Haptip?=?2-(5-phenylthiophen-2-yl)-1H-imidazo[4,5-f][1,10]phenanthroline}.     

Electrochemiluminescence of tris(2,2′‐bipyridyl)ruthenium and its applications in bioanalysis: a review

Electrochemiluminescence (ECL) of tris(2,2’‐bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] is an active research area and includes the synthesis of ECL‐active materials, mechanistic studies and broad applications. Extensive research has been focused on this area, due to its scientific and practical importance. In this mini‐review we focus on the bio‐related applications of ECL. After a brief introduction to Ru(bpy)₃²⁺ ECL and its mechanisms, its application in constructing an effective bioassay is discussed in detail. Three types of ECL assay are covered: DNA, immunoassay and functional nucleic acid sensors. Finally, future directions for these assays are discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of bergenin based on the electrochemiluminescence quenching of tris(2,2′‐bipyridine)‐ruthenium(II)

Quenching effects of bergenin, based on the electrochemiluminescence (ECL) of the tris(2,2′‐bipyridyl)‐ruthenium(II) (Ru(bpy)₃²⁺)/tri‐n‐propylamine (TPrA) system in aqueous solution, is been described. The quenching behavior can be observed with a 100‐fold excess of bergenin over Ru(bpy)₃²⁺. In the presence of 0.1 m TPrA, the Stern–Volmer constant (K_SV) of the ECL quenching is as high as 1.16 × 10⁴ M^?1 for bergenin. The logarithmic plot of the inhibited ECL versus logarithmic plot of the concentration of bergenin was linear over the range 3.0 × 10^?6–1.0 × 10^?4 mol/L. The corresponding limit of detection was 6.0 × 10^?7 mol/L for bergenin (S/N = 3). In the mechanism of quenching it is believed that the competition of the active free radicals between Ru(bpy)₃²⁺/TPrA and bergenin was the key factor for the ECL inhibition of the system. Photoluminescence, cyclic voltammetry, coupled with bulk electrolysis, supports the supposition mechanism of the Ru(bpy)₃²⁺/TPrA–bergenin system. Copyright © 2015 John Wiley & Sons, Ltd.     

Self‐quenching in the electrochemiluminescence of Ru(bpy)32+ using ascorbic acid as co‐reactant

In this study, electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ (bpy = 2,2′‐bipyridyl) using ascorbic acid (H₂A) as co‐reactant was investigated in an aqueous solution. When H₂A was co‐existent in a Ru(bpy)₃²⁺‐containing buffer solution, ECL peaks were observed at a potential corresponding to the oxidation of Ru(bpy)₃²⁺, and the intensity was proportional to H₂A concentration at lower concentration levels. The formation of the excited state *Ru(bpy)₃²⁺ was confirmed to result from the co‐reaction between Ru(bpy)₃³⁺and the intermediate of ascorbate anion radical (A⁻•), which showed the maximum ECL at pH = 8.8. It is our first finding that the ECL intensity would be quenched significantly when the concentration of H₂A was relatively higher, or upon ultrasonic irradiation. In most instances, quenching is observed with four‐fold excess of H₂A over Ru(bpy)₃²⁺. The diffusional self‐quenching scheme as well as the possible reaction pathways involved in the Ru(bpy)₃²⁺–H₂A ECL system are discussed in this study. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterisation of bis(2,2′-bipyridine)(4-carboxy-4′-(pyrid-2-ylmethylamido)-2,2′-bipyridine)ruthenium(II) di(hexafluorophosphate): Comparison of spectroelectrochemical properties with related complexes

The new complex, [Ru^II(bpy)₂(4-HCOO-4′-pyCH₂ NHCO-bpy)](PF₆)₂ · 3H₂O (1), where 4-HCOO-4′-pyCH₂NHCO-bpy is 4-(carboxylic acid)-4′-pyrid-2-ylmethylamido-2,2′-bipyridine, has been synthesised from [Ru(bpy)₂(H₂dcbpy)](PF₆)₂ (H₂dcbpy is 4,4′-(dicarboxylic acid)-2,2′-bipyridine) and characterised by elemental analysis and spectroscopic methods. An X-ray crystal structure determination of the trihydrate of the [Ru(bpy)₂(H₂dcbpy)](PF₆)₂ precursor is reported, since it represented a different solvate to an existing structure. The structure shows a distorted octahedral arrangement of the ligands around the ruthenium(II) centre and is consistent with the carboxyl groups being protonated. A comparative study of the electrochemical and photophysical properties of [Ru^II(bpy)₂(4-HCOO-4′-pyCH₂NHCO-bpy)]²⁺ (1), [Ru(bpy)₂(H₂dcbpy)]²⁺ (2), [Ru(bpy)₃]²⁺ (3), [Ru(bpy)₂Cl₂] (4) and [Ru(bpy)₂Cl₂]⁺ (5) was then undertaken to determine their variation upon changing the ligands occupying two of the six ruthenium(II) coordination sites. The ruthenium(II) complexes exhibit intense ligand centred (LC) transition bands in the UV region, and broad MLCT bands in the visible region. The ruthenium(III) complex, 5, displayed overlapping LC bands in the UV region and a LMCT band in the visible. 1, 2 and 3 were found, via cyclic voltammetry at a glassy carbon electrode, to exhibit very positive reversible formal potentials of 996, 992 and 893 mV (versus Fc/Fc⁺) respectively for the Ru(III)/Ru(II) half-cell reaction. As expected the reversible potential derived from oxidation of 4 (−77 mV (versus Fc/Fc⁺)) was in excellent agreement with that found via reduction of 5 (−84 mV (versus Fc/Fc⁺)). Spectroelectrochemical experiments in an optically transparent thin-layer electrochemical cell configuration allowed UV-Vis spectra of the Ru(III) redox state to be obtained for 1, 2, 3 and 4 and also confirmed that 5 was the product of oxidative bulk electrolysis of 4. These spectrochemical measurements also confirmed that the oxidation of all Ru(II) complexes and reduction of the corresponding Ru(III) complex are fully reversible in both the chemical and electrochemical senses.     

Large enhancement of oscillating chemiluminescence with [Ru(bpy)3]2+‐catalyzed Belousov–Zhabotinsky reaction in the presence of tri‐n‐propylamine

Oscillating chemiluminescence enhanced by the addition of tri‐n‐propylamine (TPrA) to the typical Belousov–Zhabotinsky (BZ) reaction system catalyzed by ruthenium(II)tris(2.2'‐bipyridine)(Ru(bpy)₃²⁺) was investigated using a luminometry method. The [Ru(bpy)₃]²⁺/TPrA system was first used as the catalyst for a BZ oscillator in a closed system, which exhibited a shorter induction period, higher amplitude and much more stable chemiluminescence (CL) oscillation. The effects of various concentrations of TPrA, oxygen and nitrogen flow rate on the oscillating behavior of this system were examined. In addition, the CL intensity of the [Ru(bpy)₃]²⁺/TPrA–BZ system was found to be inhibited by phenol, thus providing a way for use of the BZ system in the determination of phenolic compounds. Moreover, the possible mechanism of the oscillating CL reaction catalyzed by [Ru(bpy)₃]²⁺/TPrA and the inhibition effects of oxygen and phenol on this oscillating CL system were considered. Copyright © 2012 John Wiley & Sons, Ltd.     

Long‐lived electrochemiluminescence of ruthenium (II) complexes/tri‐n‐propylamine in aqueous solutions

Although the clinical use of immunoassays based on the oxidative‐reduction electrochemiluminescence (ECL) of tris(2,2′‐bipyridine)ruthenium (II)/tri‐n‐propylamine has been a great success, elucidation of the ECL generation mechanism still remains unsatisfactory. We report here our experimental observations of long‐lived luminescence that remains detectable for several seconds after termination of electrochemical heterogeneous oxidation. Long‐lived luminescence was observed in both a surfactant‐free buffer and a surfactant‐containing broadly used commercial buffer under different conditions. The slow decay of emission seems to have been unnoticed in previous ECL mechanistic studies. Within the frame of the reaction schemes so far proposed, its origin is inconclusively ascribed to the reductive‐oxidation process of ruthenium (II) complex, that is Ru(bpy)₃²⁺ → Ru(bpy)₃¹⁺ → Ru(bpy)₃²⁺* → Ru(bpy)₃²⁺ with the involvement of the tri‐n‐propylamine‐derived radical cation. It is anticipated that long‐lived ECL will suggest a research approach to separate some homogeneous reactions from the complicated reaction system and therefore help to resolve the mechanistic mystery.     

DNA-Binding and Photocleavage Properties of Ru(II) Polypyridyl Complexes with DNA and Their Toxicity Studies on Eukaryotic Microorganisms

Four Ru(II) polypyridyl complexes, [Ru(bpy)₂(7-NO₂-dppz)]²⁺, [Ru(bpy)₂(7-CH₃-dppz)]²⁺, [Ru(phen)₂(7-NO₂-dppz)]²⁺, and [Ru(phen)₂(7-CH₃-dppz)]²⁺ (bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline), (7-Nitro-dppz = 7-Nitro dipyrido[3,2-a:2′-3′-c]phenazine, 7-CH₃-dppz = 7-Methyl dipyrido[3,2-a:2′-3′-c]phenazine), have been synthesized and characterized by IR, UV, elemental analysis, ¹H NMR, ¹³C-NMR, and mass spectroscopy. The DNA-binding properties of the four complexes were investigated by spectroscopic and viscosity measurements. The results suggest that all four complexes bind to DNA via an intercalative mode. Under irradiation at 365 nm, all four complexes were found to promote the photocleavage of plasmid pBR 322 DNA. Toxicological effects of the selected complexes were performed on industrially important yeasts (eukaryotic microorganisms).     

Synthesis, characterization and redox reactivity of l-tartrato bridged dinuclear manganese complex with 2,2′-bipyridine

A new l-tartrato manganese(III) complex was synthesized and characterized as the dinuclear dimanganese(III) structure with a stereospefically formed [Λ-Λ] absolute configuration around Mn(III) ions. The thermal and photo decomposition gave the first example of dihydrogen gas evolution besides CO and CO₂ gas associated with cis-[Mn^II(ox)(bpy)(H₂O)₂]. A proposed redox reaction proceeds from Mn(III) to Mn(II) via intermediate Mn(IV) and Mn(II) with CO anion radical species followed by oxidation of tartrate ligands.     

Interaction of [Ru(bpy)2(dppz)] with human telomeric DNA: Preferential binding to G-quadruplexes over i-motif

Inspired by the enormous importance attributed to the structure and function of human telomeric DNA, we focus our attention on the interaction of [Ru(bpy)₂(dppz)]²⁺ with the guanine-rich single-strand oligomer 5′-AGGGTTAGGGTTAGGGTTAGGG-3′ (22AG) and the complementary cytosine-rich strand (22CT). In Na⁺ buffer, 22AG may adopt an antiparallel basket quadruplex, whereas, it favours a mixed parallel/antiparallel structure in K⁺ buffer. 22CT may self-associate at acidic pH into an i-motif. In this paper, the interaction between [Ru(bpy)₂(dppz)]²⁺ and each unusual DNA was evaluated. It was interesting that [Ru(bpy)₂(dppz)]²⁺ could promote the human telomeric repeat 22AG to fold into intramolecular antiparallel G-quadruplex without any other cations. What's more, [Ru(bpy)₂(dppz)]²⁺ was found to have a strong preference for binding to G-quadruplexes that were induced through either Na⁺ or K⁺, while weak binding to i-motif was observed. The results also indicated that [Ru(bpy)₂(dppz)]²⁺ could serve as a prominent molecular “light switch” for both G-quadruplexes, revealing a potential application of the title complex in luminescent signaling of G-quadruplex DNA.     

Luminescent α-diimine complexes of ruthenium(II) containing scorpionate ligands

We describe the synthesis, characterization, and reactivity of several Ru(II) complexes of the type cis-L₂Ru(Z)ⁿ⁺, where L is an α-diimine [e.g. 2,2′-bipyridine (bpy) or 1,10-phenanthroline (phen)] ligand and Z is a bis-coordinated scorpionate ligand such as tris-(1-pyrazolyl)methane (HC(pz)₃, PZ=1-pyrazolyl; n=2) or tetrakis-(1-pyrazolyl)borate anion (B(pz)₄ ⁻; n=1). The complexes each exhibit strong visible absorption assigned as a π*(L)←dπ(Ru) metal-to-ligand charge-transfer (MLCT) transition characteristic of the cis-L₂Ru²⁺ kernel. A corresponding MLCT excited state emission is observed in room temperature CH₃CN solution, although emission energies, lifetimes, and quantum yields are reduced relative to Ru(bpy)₃ ²⁺. Electronic spectra and cyclic voltammetry measurements indicate that the relative π-acceptor abilities of the coordinated Z are: Z=(1H-pyrazolyl)₂(pz)₂B(pz)₂<(pyridine)₂<(pz)₂CH(pz). Uncoordinated pz groups of cis-(bpy)₂Ru(pz)₂B(pz)₂ ⁺ can be reacted to form a sterically hindered, localized-valence (K_com33 l mol⁻¹) cis,cis-(bpy)₂Ru^II(pz)₂B(pz)₂Ru^II(bpy)₂ ³⁺ dimer. The dimer properties are interpreted by comparison to the known cis-(bpy)₂Ru^II(pz)₂Ru^II(bpy)₂ ²⁺ analog. The dimer is photoreactive and undergoes an asymmetrical photocleavage in CH₃CN (yielding cis-(bpy)₂Ru^III(pz)₂B(pz)₂ ²⁺ and cis-(bpy)₂Ru^II(CH₃CN)₂ ²⁺), similar to the corresponding thermal reaction observed for the mixed-valence cis-(bpy)₂Ru^II(pz)₂Ru^III(bpy)₂ ³⁺ system.     

Potential‐resolved electrochemiluminescence of Ru(bpy)32+/C2O42− system on gold electrode

The electrogenerated chemiluminescence of Ru(bpy)₃²⁺/C₂O₄^2? system on a pre‐polarized Au electrode was studied using a potential‐resolved electrochemiluminescence (PRECL) method. Two anodic ECL peaks were observed at 1.22 V (vs. SCE) (EP1), 1.41 V (vs. SCE) (EP2), respectively. The effects of the concentration of oxalate and Ru(bpy)₃²⁺, adsorbed sulphur, CO₂, O₂, pH of the solution and pretreatment of the Au electrode on the two PRECL peaks were examined. The surface state of the pre‐oxidized gold electrode was also studied using the X‐ray photoelectron spectroscopy (XPS) technique. Moreover, comparative studies on i–E and I–E curves were carried out and a possible mechanism involving both the catalytic and the direct electro‐oxidation pathways was proposed for the ECL of Ru(bpy)₃²⁺/C₂O₄^2? system. EP1 is attributed to the Ru(bpy)₃^2/3+ reaction catalysed by C₂O₄^2? to generate Ru(bpy)₃^2+*. EP2 is likely because C₂O₄^2? was oxidized at the electrode to form CO₂^?·, followed by reaction with Ru(bpy)₃³⁺ to generate Ru(bpy)₃^2+*. Copyright © 2002 John Wiley & Sons, Ltd.