Investigation of enzyme formulation on pretreated switchgrass

This work studied the benefits of adding different enzyme cocktails (cellulase, xylanase, β-glucosidase) to pretreated switchgrass. Pretreatment methods included ammonia fiber expansion (AFEX), dilute-acid (DA), liquid hot water (LHW), lime, lime + ball-milling, soaking in aqueous ammonia (SAA), and sulfur dioxide (SO₂). The compositions of the pretreated materials were analyzed and showed a strong correlation between initial xylan composition and the benefits of xylanase addition. Adding xylanase dramatically improved xylan yields for SAA (+8.4%) and AFEX (+6.3%), and showed negligible improvement (0-2%) for the pretreatments with low xylan content (dilute-acid, SO₂). Xylanase addition also improved overall yields with lime + ball-milling and SO₂ achieving the highest overall yields from pretreated biomass (98.3% and 93.2%, respectively). Lime + ball-milling obtained an enzymatic yield of 92.3 kg of sugar digested/kg of protein loaded.     

Improved Sugar Conversion and Ethanol Yield for Forage Sorghum (Sorghum bicolor L. Moench) Lines with Reduced Lignin Contents

Lignin is known to impede conversion of lignocellulose into ethanol. In this study, forage sorghum plants carrying brown midrib (bmr) mutations, which reduce lignin contents, were evaluated as bioenergy feedstocks. The near-isogenic lines evaluated were: wild type, bmr-6, bmr-12, and bmr-6 bmr-12 double mutant. The bmr-6 and bmr-12 mutations were equally efficient at reducing lignin contents (by 13% and 15%, respectively), and the effects were additive (27%) for the double mutant. Reducing lignin content was highly beneficial for improving biomass conversion yields. Sorghum biomass samples were pretreated with dilute acid and recovered solids washed and hydrolyzed with cellulase to liberate glucose. Glucose yields for the sorghum biomass were improved by 27%, 23%, and 34% for bmr-6, bmr-12, and the double mutant, respectively, compared to wild type. Sorghum biomass was also pretreated with dilute acid followed by co-treatment with cellulases and Saccharomyces cerevisiae for simultaneous saccharification and fermentation (SSF) into ethanol. Conversion of cellulose to ethanol for dilute-acid pretreated sorghum biomass was improved by 22%, 21%, and 43% for bmr-6, bmr-12, and the double mutant compared to wild type, respectively. Electron microscopy of dilute-acid treated samples showed an increased number of lignin globules in double-mutant tissues as compared to the wild-type, suggesting the lignin had become more pliable. The mutations were also effective for improving ethanol yields when the (degrained) sorghum was pretreated with dilute alkali instead of dilute acid. Following pretreatment with dilute ammonium hydroxide and SSF, ethanol conversion yields were 116 and 130 mg ethanol/g dry biomass for the double-mutant samples and 98 and 113 mg/g for the wild-type samples.     

Scale-up study of oxalic acid pretreatment of agricultural lignocellulosic biomass for the production of bioethanol

Building on our laboratory-scale optimization, oxalic acid was used to pretreat corncobs on the pilot-scale. The hydrolysate obtained after washing the pretreated biomass contained 32.55 g/l of xylose, 2.74 g/l of glucose and low concentrations of inhibitors. Ethanol production, using Scheffersomyces stipitis, from this hydrolysate was 10.3 g/l, which approached the predicted value of 11.9 g/l. Diafiltration using a membrane system effectively reduced acetic acid in the hydrolysate, which increased the fermentation rate. The hemicellulose content of the recovered solids decreased from 27.86% before pretreatment to only 6.76% after pretreatment. Most of the cellulose remained in the pretreated biomass. The highest ethanol production after simultaneous saccharification and fermentation (SSF) of washed biomass with S. stipitis was 21.1 g/l.     

Effect of reduced sulfur compounds on the fermentation of phosphoric acid pretreated sugarcane bagasse by ethanologenic Escherichia coli

The addition of reduced sulfur compounds (thiosulfate, cysteine, sodium hydrosulfite, and sodium metabisulfite) increased growth and fermentation of dilute acid hydrolysate of sugarcane bagasse by ethanologenic Escherichia coli (strains LY180, EMFR9, and MM160). With sodium metabisulfite (0.5 mM), toxicity was sufficiently reduced that slurries of pretreated biomass (10% dry weight including fiber and solubles) could be fermented by E. coli strain MM160 without solid-liquid separation or cleanup of sugars. A 6-h liquefaction step was added to improve mixing. Sodium metabisulfite also caused spectral changes at wavelengths corresponding to furfural and soluble products from lignin. Glucose and cellobiose were rapidly metabolized. Xylose utilization was improved by sodium metabisulfite but remained incomplete after 144 h. The overall ethanol yield for this liquefaction plus simultaneous saccharification and co-fermentation process was 0.20 g ethanol/g bagasse dry weight, 250 L/tonne (61 gal/US ton).     

A pilot study on lignocelluloses to ethanol and fish feed using NMMO pretreatment and cultivation with zygomycetes in an air-lift reactor

A complete process for the production of bioethanol and fungal biomass from spruce and birch was investigated. The process included milling, pretreatment with N-methylmorpholine-N-oxide (NMMO), washing of the pretreated wood, enzymatic hydrolysis, and cultivation of the zygomycetes fungi Mucor indicus. Investigated factors included wood chip size (0.5-16 mm), pretreatment time (1-5 h), and scale of the process from bench-scale to 2 m high air-lift reactor. Best hydrolysis yields were achieved from wood chips below 2 mm after 5 h of pretreatment. Ethanol yields (mg/g wood) of 195 and 128 for spruce, and 175 and 136 for birch were achieved from bench-scale and airlift, respectively. Fungal biomass yields (mg/g wood) of 103 and 70 for spruce, and 86 and 66 for birch from bench scale and airlift respectively were simultaneously achieved. NMMO pretreatment and cultivation with M. indicus appear to be a good alternative for ethanol production from birch and spruce.     

Ethanol production from sorghum by a dilute ammonia pretreatment

Sorghum fibers were pretreated with ammonium hydroxide and the effectiveness of the pretreatment evaluated by enzyme hydrolysis and ethanol production. The treatment was carried out by mixing sorghum fibers, ammonia, and water at a ratio of 1:0.14:8 at 160°C for 1 h under 140–160 psi pressure. Approximately 44% lignin and 35% hemicellulose were removed during the process. Untreated and dilute-ammonia-treated fibers at 10% dry solids were hydrolyzed using combinations of commercially available enzymes, Spezyme CP and Novozyme 188. Enzyme combinations were tested at full strength (60 FPU Spezyme CP and 64 CBU Novozyme 188/g glucan) and at half strength (30 FPU Spezyme CP and 32 CBU Novozyme 188/g glucan). Biomass enzyme hydrolysis was conducted for 24 h. Saccharomyces cerevisiae D₅A was added post hydrolysis for conversion of glucose to ethanol. Theoretical cellulose yields for treated biomass were 84% and 73%, and hemicellulose yields were 73% and 55% for full strength and half strength, respectively. Average cellulose yield was 38% and hemicellulose yield was 14.5% for untreated biomass. Ethanol yields were 25 g/100 g dry biomass and 21 g/100 g dry biomass for full strength and half strength enzyme concentrations, respectively. Controls averaged 10 g ethanol/100 g dry biomass.     

Enzyme hydrolysis and ethanol fermentation of dilute ammonia pretreated energy cane

This study is the first one ever to report on the use of high fiber sugarcane (a.k.a. energy cane) bagasse as feedstock for the production of cellulosic ethanol. Energy cane bagasse was pretreated with ammonium hydroxide (28% v/v solution), and water at a ratio of 1:0.5:8 at 160 °C for 1 h under 0.9-1.1 MPa. Approximately, 55% lignin, 30% hemicellulose, 9% cellulose, and 6% other (e.g., ash, proteins) were removed during the process. The maximum glucan conversion of dilute ammonia treated energy cane bagasse by cellulases was 87% with an ethanol yield (glucose only) of 23 g ethanol/100 g dry biomass. The enzymatic digestibility was related to the removal of lignin and hemicellulose, perhaps due to increased surface area and porosity resulting in the deformation and swelling of exposed fibers as shown in the SEM pictures.     

Fungal pretreatment: An alternative in second-generation ethanol from wheat straw

The potential of a fungal pretreatment combined with a mild alkali treatment to replace or complement current physico-chemical methods for ethanol production from wheat straw has been investigated. Changes in substrate composition, secretion of ligninolytic enzymes, enzymatic hydrolysis efficiency and ethanol yield after 7, 14 and 21 days of solid-state fermentation were evaluated. Most fungi degraded lignin with variable selectivity degrees, although only eight of them improved sugar recovery compared to untreated samples. Glucose yield after 21 days of pretreatment with Poria subvermispora and Irpex lacteus reached 69% and 66% of cellulose available in the wheat straw, respectively, with an ethanol yield of 62% in both cases. Conversions from glucose to ethanol reached around 90%, showing that no inhibitors were generated during this pretreatment. No close correlations were found between ligninolytic enzymes production and sugar yields.     

Ethanol production from lignocellulosic biomass of energy cane

Ethanol produced from lignocellulosic biomass is a renewable alternative to diminishing petroleum based liquid fuels. The release of many new sugarcane varieties by the United States Department of Agriculture to be used as energy crops is a promising feedstock alternative. Energy cane produces large amounts of biomass that can be easily transported, and production does not compete with food supply and prices because energy cane can be grown on marginal land instead of land for food crops. The purpose of this study was to evaluate energy cane for lignocellulosic ethanol production. Energy cane variety L 79-1002 was pretreated with weak sulfuric acid to remove lignin. In this study, 1.4 M sulfuric acid pretreated type II energy cane had a higher ethanol yield after fermentation by Klebsiella oxytoca without enzymatic saccharification than 0.8 M and 1.6 M sulfuric acid pretreated type II energy cane. Pretreated biomass was inoculated with K. oxytoca for cellulose fermentation and Pichia stipitis for hemicellulose fermentation under simultaneous saccahrification and fermentation (SSF) and separate hydrolysis and fermentation (SHF) conditions. For enzymatic saccharification of cellulose, the cellulase and ??-glucanase cocktail significantly increased ethanol production compared to the ethanol production of fermented acid pretreated energy cane without enzymatic saccharification. The results revealed that energy cane variety L 79-1002 produced maximum cellulosic ethanol under SHF (6995 mg/L) and produced 3624 mg/L ethanol from fermentation of hemicellulosic sugars.     

Ethanol yields and cell wall properties in divergently bred switchgrass genotypes

Genetic modification of herbaceous plant cell walls to increase biofuels yields is a primary bioenergy research goal. Using two switchgrass populations developed by divergent breeding for ruminant digestibility, the contributions of several wall-related factors to ethanol yields was evaluated. Field grown low lignin plants significantly out yielded high lignin plants for conversion to ethanol by 39.1% and extraction of xylans by 12%. However, across all plants analyzed, greater than 50% of the variation in ethanol yields was attributable to changes in tissue and cell wall architecture, and responses of stem biomass to dilute-acid pretreatment. Although lignin levels were lower in the most efficiently converted genotypes, no apparent correlation were seen in the lignin monomer G/S ratios. Plants with higher ethanol yields were associated with an apparent decrease in the lignification of the cortical sclerenchyma, and a marked decrease in the granularity of the cell walls following dilute-acid pretreatment.     

Enhanced ethanol production via fermentation of rice straw with hydrolysate-adapted Candida tropicalis ATCC 13803

Neutralized hydrolysate and pretreated rice straw obtained from a 2% (w/v) sulfuric acid pretreatment were mixed at 10% (w/v) and subjected to simultaneous saccharification and co-fermentation (SSCF), with cellulase, β-glucosidase, and Candida tropicalis cells at 15 FPU/g-ds, 15 IU/g-ds and 1 × 10⁹ cells/ml, respectively. A 36-h SSCF with adapted cells resulted in YP/S and ethanol volumetric productivity of 0.36 g/g and 0.57 g/l/h, respectively. In addition to ethanol, insignificant amounts of glycerol and xylitol were also produced. Adapted C. tropicalis cells produced nearly 1.6 times more ethanol than non-adapted cells. Ethanol yield (Yp/s), ethanol volumetric productivity and a xylitol concentration of 0.48 g/g, 0.33 g/l/h and 0.89 g/l, respectively, were produced from fermentation of remaining hydrolysate with adapted C. tropicalis cells. The 0.20 g/g ethanol yield and 77% production efficiency from SSCF of pretreated rice straw indicate scale-up potential for the process. This study demonstrated that C. tropicalis produced ethanol and xylitol from a mixed-sugar stream, although cell adaptation affected ethanol and xylitol yields. Scanning electron microscopy indicated agglomeration of cellulose microfibrils and globular deposition of lignin in acid-pretreated rice straw.     

A Rapid Simultaneous Saccharification and Fermentation (SSF) Technique to Determine Ethanol Yields

We have developed a relatively simple simultaneous saccharification and fermentation (SSF) technique to determine the ethanol production potential for large sets of biomass samples. The technique is based on soaking approximately 0.5 grams of a biomass sample in aqueous ammonia at room temperature and at atmospheric pressure for 24 h, then fermenting with Saccharomyces cerevisiae D₅A for 24 h using Spezyme CP, for enzymatic hydrolysis of structural polysaccharides. We have tested the technique on a set of corn stover samples representing much of the genetic variability in the commercial corn hybrid population. The samples were weighed into modified Ankom filter bags (F57) before soaking to avoid biomass loss during the process. Fermentation samples were analyzed for ethanol after 24 h by HPLC. Percentages of theoretical maximum ethanol yields of the samples ranged between 44.9 and 73%. We observed that percentages of theoretical maximum ethanol yields were highly correlated (r ²?=?0.90) with acid detergent lignin concentration while a low correlation was observed between cellulose concentration and ethanol yield. Near infrared spectra of corn stover samples were also examined. The coefficient of determination (r ²) from regression of predicted versus measured percent theoretical maximum ethanol yield was 0.96. This result suggests that using NIRS is a promising method for predicting ethanol yield, but larger calibration sets are necessary for obtaining improved accuracy for larger sample populations. We conclude that the developed SSF technique could be applied to large numbers of biomass samples to rapidly estimate ethanol yields and to compare different biomass samples in terms of ethanol yields.     

Ethanol production from oil palm trunks treated with aqueous ammonia and cellulase

Oil palm trunks are a possible lignocellulosic source for ethanol production. Low enzymatic digestibility of this type of material (11.9% of the theoretical glucose yield) makes pretreatment necessary. An enzymatic digestibility of 95.4% with insoluble solids recovery of 49.8% was achieved after soaking shredded oil palm trunks in ammonia under optimum conditions (80 °C, 1:12 solid-to-liquid ratio, 8 h and 7% (w/w) ammonia solution). Treatment with 60 FPU of commercial cellulase (Accellerase 1000) per gram of glucan and fermentation with Saccharomyces cerevisiae D₅A resulted in an ethanol concentration of 13.3 g/L and an ethanol yield of 78.3% (based on the theoretical maximum) after 96 h. These results indicate that oil palm trunks are a biomass feedstock that can be used for bioethanol production.     

Dissolution of cellulose from AFEX-pretreated Zoysia japonica in AMIMCl with ultrasonic vibration

In this study, 1-allyl-3-methylimidazolium chloride (AMIMCl), an ionic liquid, was synthesized and characterized by a series of test methods. Pretreatment of Zoysia japonica by ammonia fiber expansion (AFEX) was shown to reduce significantly the mass of hemicellulose and lignin in biomass, thereby breaking the lignocellulosic structure. Z. japonica samples pretreated with AFEX showed reasonable solubility in AMIMCl upon ultrasonic treatment. The rate of cellulose regeneration from Z. japonica samples pretreated with AFEX increased with increase in applied power of ultrasonication within a certain power range from 0 to 110 W. The regeneration rate of cellulose from AFEX-pretreated Z. japonica reached a maximum of 97% when the ultrasonic power was 110 W. Fourier transform infrared spectroscopy and nuclear magnetic resonance analyses indicated that the regenerated cellulose was similar to microcrystalline cellulose.     

Front-end recovery of protein from lignocellulosic biomass and its effects on chemical pretreatment and enzymatic saccharification

Front-end protein recovery from biomass at different maturities, and its effects on chemical pretreatment and enzyme hydrolysis of partially deproteinized fiber were investigated. The protein recovery from alfalfa and switchgrass biomass using sodium dodecyl sulfate and potassium hydroxide treatments was ~50–65 % of initial biomass protein. When hot water was used as extraction media, the protein recovery was 52.9 and 43.7 % of total protein in switchgrass and alfalfa, respectively. For any treatment, relative protein recovery was higher from switchgrass than from alfalfa. Only approximately half the total protein was recovered from relatively mature (early fall) biomass compared with midsummer harvested biomass. When protein was recovered partially using sodium dodecyl sulfate or potassium hydroxide, and leftover fiber pretreated, aqueous ammonia pretreatment removed 58.5–60.1 % of lignin and retained more cellulose in the fiber compared with acid pretreatment (nearly no lignin removal). Protein removal was helpful in the enzyme digestibility of fibers. Delignification of ammonia pretreated partially deproteinized alfalfa fiber was in the range of 34.4–45 %, while dilute sulfuric acid did not remove lignin effectively. Overall, the higher delignification and enzyme digestibilities were observed in aqueous ammonia pretreated partially deproteinized alfalfa fibers regardless of biomass type.     

Improvement of direct ethanol fermentation from woody biomasses by the Antarctic basidiomycetous yeast, Mrakia blollopis, under a low temperature condition

The Antarctic basidiomycetous yeast Mrakia blollopis SK-4 can quite uniquely ferment various sugars under low temperature conditions. When strain SK-4 fermented lignocellulosic biomass using the direct ethanol fermentation (DEF) technique, approximately 30% to 65% of the theoretical ethanol yield was obtained without and with the addition of the non-ionic surfactant Tween 80, respectively. Therefore, DEF from lignocellulosic biomass with M. blollopis SK-4 requires the addition of a non-ionic surfactant to improve fermentation efficiency. DEF with lipase converted Eucalyptus and Japanese cedar to 12.6 g/l, and 14.6 g/l ethanol, respectively. In the presence of 1% (v/v) Tween 80 and 5 U/g-dry substrate lipase, ethanol concentration increased about 1.4- to 2.4-fold compared to that without Tween 80 and lipase. We therefore consider that the combination of M. blollopis SK-4 and DEF with Tween 80 and lipase has good potential for ethanol fermentation in cold environments.     

Pretreatment of switchgrass for sugar production with the combination of sodium hydroxide and lime

Sodium hydroxide (NaOH) and lime (Ca(OH)₂) were innovatively used together in this study to improve the cost-effectiveness of alkaline pretreatment of switchgrass at ambient temperature. Based on the sugar production in enzymatic hydrolysis, the best pretreatment conditions were determined as: residence time of 6 h, NaOH loading of 0.10 g/g raw biomass, NaOH addition at the beginning, Ca(OH)₂ loading of 0.02 g/g raw biomass, and biomass wash intensity of 100 ml water/g raw biomass, at which the glucose and xylose yields were respectively 59.4% and 57.3% of the theoretical yields. The sugar yield of the biomass pretreated using the combination of 0.10 g NaOH/g raw biomass and 0.02 g Ca(OH)₂/g raw biomass was found comparable with that of the biomass pretreated using 0.20 g NaOH/g raw biomass at the same conditions, while the chemical expense was remarkably reduced due to the low cost of lime and the reduced loading of NaOH.     

A novel assay for rapid in vivo determination of phenotypic stability of recombinant ethanol-producing microorganisms

A rapid empirical assay is presented for assessing the phenotypic stability of continuous cultures of recombinant bacteria containing transposed pdc and adh genes for ethanol production. The method measures spectrophotometrically the rate of colour formation when cells oxidize added ethanol to acetaldehyde in the presence of Schiff’s reagent. During chemostat cultures of the recombinant ethanologen Escherichia coli KO11 on 20 g/l glucose, assay activities were stable and high at ca 8 × 10⁻⁴ ΔOD₅₄₀/(s.OD₅₅₀), reflecting the high, stable ethanol yield (ca 95%). On 20 g/l and 50 g/l xylose, ethanol yields declined rapidly to about 60% and this was closely mirrored by the assay activities which fell to ca 1.5 ΔOD₅₄₀/(s.OD₅₅₀), only slightly higher than those measured for the parent strain. Typically taking only about an hour to perform, the assay provides a faster means of gauging the phenotypic stability of ethanol production than is possible by conventional methods.     

A biochemically structured model for ethanol fermentation by Kluyveromyces marxianus: A batch fermentation and kinetic study

Anaerobic batch fermentations of ricotta cheese whey (i.e. containing lactose) were performed under different operating conditions. Ethanol concentrations of ca. 22 g L⁻¹ were found from whey containing ca. 44 g L⁻¹ lactose, which corresponded to up to 95% of the theoretical ethanol yield within 15 h. The experimental data could be explained by means of a simple knowledge-driven biochemically structured model that was built on bioenergetics principles applied to the metabolic pathways through which lactose is converted into major products. Use of the model showed that the observed concentrations of ethanol, lactose, biomass and glycerol during batch fermentation could be described within a ca. 6% deviation, as could the yield coefficients for biomass and ethanol produced on lactose. The model structure confirmed that the thermodynamics considerations on the stoichiometry of the system constrain the metabolic coefficients within a physically meaningful range thereby providing valuable and reliable insight into fermentation processes.