Effects of hip joint centre mislocation on gait analysis results

Methods to determine the hip joint centre (HJC) location are necessary in gait analysis. It has been demonstrated that the methods proposed in the literature involve large mislocation errors. The choice should be made according to the extent by which HJC location errors distort the estimates of angles and resultant moments at the hip and knee joints. This study aimed at quantifying how mislocation errors propagate to these gait analysis results. Angles and moments at the hip and knee joint were calculated for five able-bodied subjects during level walking. The nominal position of the HJC was determined as the position of the pivot point of a 3D movement of the thigh relative to the pelvis. Angles and moments were then re-calculated after having added to HJC co-ordinates errors in the range of +/-30 mm. Angles and moments at both hip and knee joints were affected by HJC mislocation. The hip moments showed the largest propagation error: a 30 mm HJC anterior mislocation resulted in a propagated error into flexion/extension component of about -22%. The hip abduction/adduction moment was found the second largest affected quantity: a 30 mm lateral HJC mislocation produced a propagated error of about -15%. Finally, a 30 mm posterior HJC mislocation produced a delay of the flexion-to-extension timing in the order of 25% of the stride duration. HJC estimation methods with minimum antero-posterior error should therefore be preferred.     

Statistical shape modelling versus linear scaling: Effects on predictions of hip joint centre location and muscle moment arms in people with hip osteoarthritis

Marker-based dynamic functional or regression methods are used to compute joint centre locations that can be used to improve linear scaling of the pelvis in musculoskeletal models, although large errors have been reported using these methods. This study aimed to investigate if statistical shape models could improve prediction of the hip joint centre (HJC) location. The inclusion of complete pelvis imaging data from computed tomography (CT) was also explored to determine if free-form deformation techniques could further improve HJC estimates. Mean Euclidean distance errors were calculated between HJC from CT and estimates from shape modelling methods, and functional- and regression-based linear scaling approaches. The HJC of a generic musculoskeletal model was also perturbed to compute the root-mean squared error (RMSE) of the hip muscle moment arms between the reference HJC obtained from CT and the different scaling methods. Shape modelling without medical imaging data significantly reduced HJC location error estimates (11.4 ± 3.3 mm) compared to functional (36.9 ± 17.5 mm, p = <0.001) and regression (31.2 ± 15 mm, p = <0.001) methods. The addition of complete pelvis imaging data to the shape modelling workflow further reduced HJC error estimates compared to no imaging (6.6 ± 3.1 mm, p = 0.002). Average RMSE were greatest for the hip flexor and extensor muscle groups using the functional (16.71 mm and 8.87 mm respectively) and regression methods (16.15 mm and 9.97 mm respectively). The effects on moment-arms were less substantial for the shape modelling methods, ranging from 0.05 to 3.2 mm. Shape modelling methods improved HJC location and muscle moment-arm estimates compared to linear scaling of musculoskeletal models in patients with hip osteoarthritis.     

Effects of added trunk load and corresponding trunk position adaptations on lower extremity biomechanics during drop-landings

Although both trunk mass and trunk position have the potential to affect lower extremity biomechanics during landing, these effects are not well understood. Our overall hypothesis stated that both trunk mass and trunk position affect lower extremity biomechanics in landing. Thus, our purpose was to determine the effects of an added trunk load and kinematic trunk adaptation groups on lower extremity joint kinematics, kinetics, and energetics during drop-landings. Twenty-one recreationally active subjects were instrumented for biomechanical analysis. Subjects performed two sets of eight double-limb landings with and without 10% body weight added to the trunk. On lower extremity dependent variables, 2(condition: no load, trunk load)x2(group: trunk extensors vs. trunk flexors) ANOVAs were performed. Condition by group interactions at the hip showed differing responses to the added trunk load between groups where the trunk extensor group decreased hip extensor efforts ( downward decrease 11-18%) while the trunk flexor group increased hip extensor efforts ( upward increase 14-19%). The trunk load increased biomechanical demands at the knee and ankle regardless of trunk adaptation group. However, the percent increases in angular impulses and energy absorption in the trunk extensor group were 14-28% while increases in the trunk flexor group were 4-9%. Given the 10% body weight added to the trunk, the 14-28% increases at the knee and ankle in the trunk extensor group were likely due to the reduced hip extensor efforts during landing. Overall these findings support our overall hypothesis that both trunk mass and trunk position affect lower extremity biomechanics during vertically oriented landing tasks.     

Differences in muscle function during walking and running at the same speed

Individual muscle contributions to body segment mechanical energetics and the functional tasks of body support and forward propulsion in walking and running at the same speed were quantified using forward dynamical simulations to elucidate differences in muscle function between the two different gait modes. Simulations that emulated experimentally measured kinesiological data of young adults walking and running at the preferred walk-to-run transition speed revealed that muscles use similar biomechanical mechanisms to provide support and forward propulsion during the two tasks. The primary exception was a decreased contribution of the soleus to forward propulsion in running, which was previously found to be significant in walking. In addition, the soleus distributed its mechanical power differently to individual body segments between the two gait modes from mid- to late stance. In walking, the soleus transferred mechanical energy from the leg to the trunk to provide support, but in running it delivered energy to both the leg and trunk. In running, earlier soleus excitation resulted in it working in synergy with the hip and knee extensors near mid-stance to provide the vertical acceleration for the subsequent flight phase in running. In addition, greater power output was produced by the soleus and hip and knee extensors in running. All other muscle groups distributed mechanical power among the body segments and provided support and forward propulsion in a qualitatively similar manner in both walking and running.     

A comparison between back squat exercise and vertical jump kinematics: implications for determining anterior cruciate ligament injury risk

Women are up to eight times more likely than men to suffer an anterior cruciate ligament (ACL) injury, and knee valgus is perhaps the most at-risk motion. Women have been shown to have more knee valgus than men in squatting movements and while landing. The purposes were to investigate whether a relationship exists between lower-extremity frontal plane motions in squatting and landing, whether gender differences exist, and whether squat or hip abduction strength relates to knee valgus while landing. Eleven collegiate Division III soccer players and 11 recreationally trained men were tested for maximal vertical jump height and for squat and hip abduction strength. On the second day of testing, subjects performed light (50% one repetition maximum) and heavy (85%) squat protocols and three landings from their maximal vertical jump height. Pearson's product-moment correlation coefficients and a 2 x 10 factorial analysis of variance with t-test post hoc comparisons (p 相似文献   

Evaluating the validity and reliability of inertial measurement units for determining knee and trunk kinematics during athletic landing and cutting movements

Inertial Measurement Units (IMUs) are promising alternatives to laboratory-based motion capture methods in biomechanical assessment of athletic movements. The aim of this study was to investigate the validity of an IMU system for determining knee and trunk kinematics during landing and cutting tasks for clinical and research applications in sporting populations. Twenty-seven participants performed five cutting and landing tasks while being recorded using a gold-standard optoelectronic motion capture system and an IMU system. Intra-class coefficients, Pearson’s r, root-mean-square error (RMSE), bias, and Bland-Altman limits of agreements between the motion capture and IMU systems were quantified for knee and trunk sagittal- and frontal-plane range-of-motion (ROM) and peak angles. Our results indicate that IMU validity was task-, joint-, and plane-dependent. Based on good-to-excellent (ICC) correlation, reasonable accuracy (RMSE < 5°), bias within 2°, and limits of agreements within 10°, we recommend the use of this IMU system for knee sagittal-plane ROM estimations during cutting, trunk sagittal-plane peak angle estimation during the double-leg landing task, trunk sagittal-plane ROM estimation for almost all tasks, and trunk frontal-plane peak angle estimation for the right single-leg landing task. Due to poor comparisons with the optoelectronic system, we do not recommend this IMU system for knee frontal-plane kinematic estimations.     

Validation of magneto-inertial measuring units for measuring hip joint angles

Camera-based motion capture systems are the current gold standard for motion analysis. However, the use of wireless inertial sensor-based systems is increasing in popularity, largely due to convenient portability. The purpose of this study was to validate the use of wireless inertial sensors for measuring hip joint motion with a functional calibration requiring only one motion (walking) and neutral standing. Data were concurrently collected using a 10-camera motion capture system and a wireless inertial sensor-based system. Hip joint angles were measured for 10 participants during walking, jumping jack, and bilateral squat tasks and for a subset (n = 5) a jump turn task. Camera-based system hip joint angles were calculated from retro-reflective marker positions and sensor-based system angles were calculated in MATLAB using the sensor output quaternions. Most hip joint angles measured with the sensor-based system were within 6° of angles measured with the camera motion capture system. Accurate measurement of motion outside of a laboratory setting has broad implications for diagnosing movement abnormalities, monitoring sports performance, and assessing rehabilitation progress.     

Ankle and knee moment and power adaptations are elicited through load carriage conditioning in males

Soldiers routinely conduct load carriage and physical training to meet occupational requirements. These tasks are physically arduous and are believed to be the primary cause of musculoskeletal injury. Physical training can help mitigate injury risk when specifically designed to address injury mechanisms and meet task demands. This study aimed to assess lower-limb biomechanics and neuromuscular adaptations during load carriage walking in response to a 10-week evidence-based physical training program. Thirteen male civilian participants donned 23 kg and completed 5 km of load carriage treadmill walking, at 5.5 km h⁻¹ before and after a 10-week physical training program. Three-dimensional motion capture and force plate data were acquired in over-ground walking trials before and after treadmill walking. These data were inputs to a musculoskeletal model which estimated lower-limb joint kinematics and kinetics (i.e., moments and powers) using inverse kinematics and dynamics, respectively. A two-way analysis of variance revealed significant main effect of training for kinematic and kinetics parameters at the knee and ankle joints (p < 0.05). Post-Hoc comparisons demonstrated a significant decrease (4.2%) in total negative knee power between pre- and post-March 5 km measures after training (p < 0.05). Positive power contribution shifted distally after training, increasing at the post-march measure from 39.9% to 43.6% at the ankle joint (p < 0.05). These findings demonstrate that a periodised training program may reduce injury risk through favourable ankle and knee joint adaptations.     

Variables during swing associated with decreased impact peak and loading rate in running

When the foot impacts the ground in running, large forces and loading rates can arise that may contribute to the development of overuse injuries. Investigating which biomechanical factors contribute to these impact loads and loading rates in running could assist clinicians in developing strategies to reduce these loads. Therefore, the goals of our work were to determine variables that predict the magnitude of the impact peak and loading rate during running, as well as to investigate how modulation of knee and hip muscle activity affects these variables. Instrumented gait analysis was conducted on 48 healthy subjects running at 3.3 m/s on a treadmill. The top four predictors of loading rate and impact peak were determined using a stepwise multiple linear regression model. Forward dynamics was performed using a whole body musculoskeletal model to determine how increased muscle activity of the knee flexors, knee extensors, hip flexors, and hip extensors during swing altered the predictors of loading rate and impact peak. A smaller impact peak was associated with a larger downward acceleration of the foot, a higher positioned foot, and a decreased downward velocity of the shank at mid-swing while a lower loading rate was associated with a higher positioned thigh at mid-swing. Our results suggest that an alternative to forefoot striking may be increased hip flexor activity during swing to alter these mid-swing kinematics and ultimately decrease the leg's velocity at landing. The decreased velocity would decrease the downward momentum of the leg and hence require a smaller force at impact.     

Energy absorption as a predictor of leg impedance in highly trained females

Although leg spring stiffness represents active muscular recruitment of the lower extremity during dynamic tasks such as hopping and running, the joint-specific characteristics comprising the damping portion of this measure, leg impedance, are uncertain. The purpose of this investigation was to assess the relationship between leg impedance and energy absorption at the ankle, knee, and hip during early (impact) and late (stabilization) phases of landing. Twenty highly trained female dancers (age = 20.3 +/- 1.4 years, height = 163.7 +/- 6.0 cm, mass = 62.1 +/- 8.1 kg) were instrumented for biomechanical analysis. Subjects performed three sets of double-leg landings from under preferred, stiff, and soft landing conditions. A stepwise linear regression analysis revealed that ankle and knee energy absorption at impact, and knee and hip energy absorption during the stabilization phases of landing explained 75.5% of the variance in leg impedance. The primary predictor of leg impedance was knee energy absorption during the stabilization phase, independently accounting for 55% of the variance. Future validation studies applying this regression model to other groups of individuals are warranted.     

A comparative collision-based analysis of human gait

This study compares human walking and running, and places them within the context of other mammalian gaits. We use a collision-based approach to analyse the fundamental dynamics of the centre of mass (CoM) according to three angles derived from the instantaneous force and velocity vectors. These dimensionless angles permit comparisons across gait, species and size. The collision angle Φ, which is equivalent to the dimensionless mechanical cost of transport CoT_mech, is found to be three times greater during running than walking of humans. This threefold difference is consistent with previous studies of walking versus trotting of quadrupeds, albeit tends to be greater in the gaits of humans and hopping bipeds than in quadrupeds. Plotting the collision angle Φ together with the angles of the CoM force vector Θ and velocity vector Λ results in the functional grouping of bipedal and quadrupedal gaits according to their CoM dynamics—walking, galloping and ambling are distinguished as separate gaits that employ collision reduction, whereas trotting, running and hopping employ little collision reduction and represent more of a continuum that is influenced by dimensionless speed. Comparable with quadrupedal mammals, collision fraction (the ratio of actual to potential collision) is 0.51 during walking and 0.89 during running, indicating substantial collision reduction during walking, but not running, of humans.     

The influence of hip strength on gluteal activity and lower extremity kinematics

The effects of hip muscle strength and activation on anterior cruciate ligament injury biomechanics, particularly knee valgus loading, have been reported in isolation and with equivocal results. However, the combination of these factors influences joint biomechanics. This investigation evaluated the influence of hip strength on gluteal activation and knee valgus motion. Maximal isometric hip abduction (ABD) and external rotation (ER) contractions were used to define High and Low strength groups. Knee kinematics and gluteus maximus (GMax) and medius (GMed) EMG amplitudes obtained during landing were compared between High and Low strength groups after controlling for the potential confounding influence of sex. Knee valgus motion did not differ between the High and Low hip ABD and ER strength groups. However, the Low ABD and ER strength groups displayed greater GMed and GMax EMG amplitudes, respectively, compared to the High strength groups. These findings suggest that weaker individuals compensate for a lack of force production via heightened neural drive. As such, hip muscle strength influences knee valgus motion indirectly by determining neural drive requirements.     

Segment and joint angles of hind limb during bipedal and quadrupedal walking of the bonobo (Pan paniscus)

We describe segment angles (trunk, thigh, shank, and foot) and joint angles (hip, knee, and ankle) for the hind limbs of bonobos walking bipedally ("bent-hip bent-knee walking," 17 sequences) and quadrupedally (33 sequences). Data were based on video recordings (50 Hz) of nine subjects in a lateral view, walking at voluntary speed. The major differences between bipedal and quadrupedal walking are found in the trunk, thigh, and hip angles. During bipedal walking, the trunk is approximately 33-41 degrees more erect than during quadrupedal locomotion, although it is considerably more bent forward than in normal human locomotion. Moreover, during bipedal walking, the hip has a smaller range of motion (by 12 degrees ) and is more extended (by 20-35 degrees ) than during quadrupedal walking. In general, angle profiles in bonobos are much more variable than in humans. Intralimb phase relationships of subsequent joint angles show that hip-knee coordination is similar for bipedal and quadrupedal walking, and resembles the human pattern. The coordination between knee and ankle differs much more from the human pattern. Based on joint angles observed throughout stance phase and on the estimation of functional leg length, an efficient inverted pendulum mechanism is not expected in bonobos.     

Females and males use different hip and knee mechanics in response to symmetric military-relevant loads

The purpose of this study was to determine if females and males use different hip and knee mechanics when walking with standardized military-relevant symmetric loads. Fifteen females and fifteen males walked on a treadmill for 2-min at a constant speed under three symmetric load conditions (unloaded: 1.71 kg, medium: 15 kg, heavy: 26 kg). Kinematic and kinetics of the hip and knee were calculated in the sagittal and frontal planes of the dominant limb. In females, hip abduction moments (normalized to total mass) and sagittal knee excursion decreased with increased load (p ≤ 0.024). In males, hip frontal excursion and adduction angle increased with load (p ≤ 0.003). Females had greater peak hip adduction angle than males in the unloaded and medium load conditions (p ≤ 0.036). Across sex, sagittal hip and knee excursion, peak knee extension angle, and peak hip and knee flexion angles increased with increased load (p ≤ 0.005). When normalized to body mass, all peak joint moments increased with each load (p ≤ 0.016) except peak hip adduction moment. When normalized to total mass, peak hip adduction moment and knee flexion, extension, and adduction moments decreased with each load (p < 0.001). While hip frontal plane kinetic alterations to load were only noted in females, kinematic changes were noted in males at the hip and females at the knee. Differences in strategies may increase the risk of hip and knee injuries in females compared to males. This study noted load and sex effects that were previously undetected, highlighting the importance of using military-relevant standardized loads and investigating frontal plane adaptations.     

Lower-limb joint work and power are modulated during load carriage based on load configuration and walking speed

Soldiers regularly transport loads weighing >20 kg at slow speeds for long durations. These tasks elicit high energetic costs through increased positive work generated by knee and ankle muscles, which may increase risk of muscular fatigue and decrease combat readiness. This study aimed to determine how modifying where load is borne changes lower-limb joint mechanical work production, and if load magnitude and/or walking speed also affect work production. Twenty Australian soldiers participated, donning a total of 12 body armor variations: six different body armor systems (one standard-issue, two commercially available [cARM1-2], and three prototypes [pARM1-3]), each worn with two different load magnitudes (15 and 30 kg). For each armor variation, participants completed treadmill walking at two speeds (1.51 and 1.83 m/s). Three-dimensional motion capture and force plate data were acquired and used to estimate joint angles and moments from inverse kinematics and dynamics, respectively. Subsequently, hip, knee, and ankle joint work and power were computed and compared between armor types and walking speeds. Positive joint work over the stance phase significantly increased with walking speed and carried load, accompanied by 2.3–2.6% shifts in total positive work production from the ankle to the hip (p < 0.05). Compared to using cARM1 with 15 kg carried load, carrying 30 kg resulted in significantly greater hip contribution to total lower-limb positive work, while knee and ankle work decreased. Substantial increases in hip joint contributions to total lower-limb positive work that occur with increases in walking speed and load magnitude highlight the importance of hip musculature to load carriage walking.     

Biomechanics of overground vs. treadmill walking in healthy individuals.

The goal of this study was to compare treadmill walking with overground walking in healthy subjects with no known gait disorders. Nineteen subjects were tested, where each subject walked on a split-belt instrumented treadmill as well as over a smooth, flat surface. Comparisons between walking conditions were made for temporal gait parameters such as step length and cadence, leg kinematics, joint moments and powers, and muscle activity. Overall, very few differences were found in temporal gait parameters or leg kinematics between treadmill and overground walking. Conversely, sagittal plane joint moments were found to be quite different, where during treadmill walking trials, subjects demonstrated less dorsiflexor moments, less knee extensor moments, and greater hip extensor moments. Joint powers in the sagittal plane were found to be similar at the ankle but quite different at the knee and hip joints. Differences in muscle activity were observed between the two walking modalities, particularly in the tibialis anterior throughout stance, and in the hamstrings, vastus medialis and adductor longus during swing. While differences were observed in muscle activation patterns, joint moments and joint powers between the two walking modalities, the overall patterns in these behaviors were quite similar. From a therapeutic perspective, this suggests that training individuals with neurological injuries on a treadmill appears to be justified.     

Knee and Hip Joint Kinematics Predict Quadriceps and Hamstrings Neuromuscular Activation Patterns in Drop Jump Landings

PurposeThe purpose was to assess if variation in sagittal plane landing kinematics is associated with variation in neuromuscular activation patterns of the quadriceps-hamstrings muscle groups during drop vertical jumps (DVJ).MethodsFifty female athletes performed three DVJ. The relationship between peak knee and hip flexion angles and the amplitude of four EMG vectors was investigated with trajectory-level canonical correlation analyses over the entire time period of the landing phase. EMG vectors consisted of the {vastus medialis(VM),vastus lateralis(VL)}, {vastus medialis(VM),hamstring medialis(HM)}, {hamstring medialis(HM),hamstring lateralis(HL)} and the {vastus lateralis(VL),hamstring lateralis(HL)}. To estimate the contribution of each individual muscle, linear regressions were also conducted using one-dimensional statistical parametric mapping.ResultsThe peak knee flexion angle was significantly positively associated with the amplitudes of the {VM,HM} and {HM,HL} during the preparatory and initial contact phase and with the {VL,HL} vector during the peak loading phase (p<0.05). Small peak knee flexion angles were significantly associated with higher HM amplitudes during the preparatory and initial contact phase (p<0.001). The amplitudes of the {VM,VL} and {VL,HL} were significantly positively associated with the peak hip flexion angle during the peak loading phase (p<0.05). Small peak hip flexion angles were significantly associated with higher VL amplitudes during the peak loading phase (p = 0.001). Higher external knee abduction and flexion moments were found in participants landing with less flexed knee and hip joints (p<0.001).ConclusionThis study demonstrated clear associations between neuromuscular activation patterns and landing kinematics in the sagittal plane during specific parts of the landing. These findings have indicated that an erect landing pattern, characterized by less hip and knee flexion, was significantly associated with an increased medial and posterior neuromuscular activation (dominant hamstrings medialis activity) during the preparatory and initial contact phase and an increased lateral neuromuscular activation (dominant vastus lateralis activity) during the peak loading phase.     

Obesity is not associated with increased knee joint torque and power during level walking

While it is widely speculated that obesity causes increased loads on the knee leading to joint degeneration, this concept is untested. The purpose of the study was to identify the effects of obesity on lower extremity joint kinetics and energetics during walking. Twenty-one obese adults were tested at self-selected (1.29m/s) and standard speeds (1.50m/s) and 18 lean adults were tested at the standard speed. Motion analysis and force platform data were combined to calculate joint torques and powers during the stance phase of walking. Obese participants were more erect with 12% less knee flexion and 11% more ankle plantarflexion in self-selected compared to standard speeds (both p<0.02). Obese participants were still more erect than lean adults with approximately 6 degrees more extension at all joints (p<0.05, for each joint) at the standard speed. Knee and ankle torques were 17% and 11% higher (p<0.034 and p<0.041) and negative knee work and positive ankle work were 68% and 11% higher (p<0.000 and p<0.048) in obese participants at the standard speed compared to the slower speed. Joint torques and powers were statistically identical at the hip and knee but were 88% and 61% higher (both p<0.000) at the ankle in obese compared to lean participants at the standard speed. Obese participants used altered gait biomechanics and despite their greater weight, they had less knee torque and power at their self-selected walking speed and equal knee torque and power while walking at the same speed as lean individuals. We propose that the ability to reorganize neuromuscular function during gait may enable some obese individuals to maintain skeletal health of the knee joint and this ability may also be a more accurate risk indicator for knee osteoarthritis than body weight.     

Test-retest reliability of knee biomechanics during stop jump landings

Studies that seek to determine the effects of an intervention on knee biomechanics during landing from a jump implicitly assume that the variables of interest are reliable both within and between data collection sessions. Currently, such reliability data are not available for a stop jump. Standard three-dimensional motion analysis was used to determine sagittal and frontal plane peak angles and moments and peak vertical ground reaction force within and between sessions for a stop jump. Twelve female recreational athletes participated in two data collection sessions spaced two weeks apart. Interclass correlation coefficients and coefficient of multiple correlation were used to determine within and between session reliability of peak knee flexion angle, peak internal knee extension moment, peak knee abduction angle, peak internal knee adduction moment and peak vertical ground reaction force. Overall reliability within a session (ICC (3,1) 0.631-0.881; CMC 0.672-0.958) and between sessions (ICC (3,k) 0.685-0.959; CMC 0.598-0.944) was good. Peak angles and moments were similar between sessions. The stop jump is less reliable within a session than a drop vertical jump reported previously in the literature. This is likely due to increased intrasubject variability between trials due to the less constrained nature of the task. Reliability of the stop jump is comparable to the drop vertical jump between sessions. Reliability of knee adduction moment is lower than reported for the drop vertical jump. The results of this study support the use of a stop jump task to evaluate knee biomechanics during landing in longitudinal studies with a repeated measures design.