Comparison of two continuous fungal bioreactors for posttreatment of anaerobically pretreated weak black liquor from kraft pulp mills

The purpose of this work was to evaluate and compare two continuous systems of posttreatment of anaerobically pretreated weak black liquor (WBL). The first system consisted of a packed bed reactor (PBR) with Trametes versicolor (Tv) immobilized on wood cubes of holm oak (biocubes). The second system was a fluidized bed reactor (FBR) with Lentinus edodes (Le) immobilized on wood cubes of holm oak. The reactors operated for 65 days at a hydraulic retention time (HRT) of 5 days, at 28 degrees C, with continuous aeration. Response variables monitored were conventional and specific, unit, net removal efficiency (eta and eta(sun), respectively) of chemical oxygen demand (COD), color, and ligninoids, and enzymatic activities of manganese peroxidase (MnP), lignin peroxidase (LiP), laccase (Lac) and proteases. The PBR showed an average color eta superior to that of the FBR (52.42 +/- 21.78% and 25.34 +/- 14.38% for PBR and FBR, respectively); removals of COD and ligninoids presented a similar pattern to that of color. Lac activity was significantly larger in PBR than in FBR. Activity of MnP in PBR was higher than that of the FBR (0.004 and 0.002 U MnP/mL, respectively). This difference could be ascribed to the different fungi present in each bioreactor. LiP activity was very low in both reactors. Average value of proteases was almost double in the FBR as compared with PBR (0.472 and 0.209 U Proteases/mL, respectively). During the last 2 weeks of operation, biocubes in the FBR experienced a significant loss of the attached Le biomass, probably by attrition. This and higher protease activity in the FBR could explain the lower pollutant removals achieved in the FBR. Overall, PBR with immobilized Tv showed a better performance than the FBR with Le for the posttreatment of the recalcitrant anaerobic effluent. Extended and sustained pollutant removal (65 days) was achieved in the PBR, although more research is needed to evaluate bioreactor performance at shorter hydraulic retention times.     

Flocculants effect in biomass retention in a UASB reactor treating dairy manure

The performance and biomass retention of an upflow anaerobic sludge bed (UASB) reactor treating liquid fraction of dairy manure has been investigated at several organic loading rates. Two identical UASB reactors were employed. The biomass of one UASB reactor (FBR) had previously been treated with a cationic polyacrylamide, the other reactor was operated as a control reactor (CR). At 3 and 2 days of HRT both reactors functioned similarly, but at 1.5 days HRT some differences were observed between both effluents. Mean COD(T) removal percentages were 83.4% and 76.5%; COD(VFA) values in effluents were 977 and 2682 mg l(-1) for the FBR and the CR respectively. The VSS initial value in both reactors was 25.66 g VSS, whereas after the experiment the quantities were 31.83 g VSS in the FBR and 23.18 g VSS in the CR reactors. Polymer addition resulted in a higher degree of biomass retention and better performance in the FBR reactor.     

Continuous production of ammonium lactate by Streptococccus cremoris in a three-stage reactor

Batch and continuous fermentation studies were performed to optimize the production of ammonium lactate from whey to optimize the production of ammonium lactate from whey permeate. The product known as fermented ammoniated condensed whey permeate (FACWP) is a very promising animal feed. After an initial screening of four strains which produce predominantly L(+)- lactic acid, the desired isomer [D(-)-lactic acid is toxic], Streptococcus cremoris 2487 was chosen for further study. In batch mode, pH between 6.0 and 6.5 and 35 degrees C provided optimum incubation conditions. To stimulate a plug flow reactor, three CSTRs (continuous stirred tank reactors) were connected in tandem. For a 7.5-h retention time, 1.6-fold and 1.3-fold higher productivities were obtained for three-stage than for the single- and two-stage reactors, respectively. Various retentions times were examined (5, 7.5, and 10 h; 5g/L yeast extract). Although maximum lactate productivity occurred at a 5-h residence time (5.38 g/L H. 75% lactose utilization), lactose utilization was more complete at 7.5 h (4.38 g/L h productivity, 91% lactose utilization and a productivity, 91% lactose utilization). Retention time was increased to 15 h to obtain 95.9% lactose utilization and a productivity of 2.42g/L h for 2g/L yeast extract. Based on this lower yeast extract concentration, it was determined that ammonium lactate production and subsequent concentration by 11-fold would yield a product (FACWP) 17% more than soybean meal (crude protein contents are equivalent, 44%) at current market prices.     

Effect of effluent recycling and shock loading on the biodegradation of complex phenolic mixture in hybrid UASB reactors

This study describes the feasibility of anaerobic treatment of synthetic coal wastewater using four identical 13.5L (effective volume) bench scale hybrid up flow anaerobic sludge blanket (HUASB) reactors (R1, R2, R3 and R4) under mesophilic (27+/-5 degrees C) conditions. Synthetic coal wastewater with an average chemical oxygen demand (COD) of 2240 mg/L and phenolics concentration of 752 mg/L was used as substrate. Effluent recirculation was employed at four different effluent to feed recirculation ratios (R/F) of 0.5, 1.0, 1.5 and 2.0 for 100 days to study the effect of recirculation on the performance of the reactors. Phenolics and COD removal was found to improve with increase in effluent recirculation. An effluent to feed recycle ratio of 1.0 resulted in maximum removal of phenolics and COD. Phenolics and COD removal improved from 88% and 92% to 95% each, respectively. The concentration of volatile fatty acids in the effluent was lower than the influent when effluent to feed recirculation was employed. Effect of shock loading on the reactors revealed that phenolics shock load up to 2.5 times increase in the normal input phenolics concentration in the form of continuous shock load for 4days did not affect the reactors performance irreversibly.     

Biomethanation of cheese whey using anaerobic upflow fixed film reactor

Performance of anaerobic upflow fixed film reactors for biomethanation of high-strength cheese whey using different support material such as charcoal, gravel, brick pieces, PVC pieces and pumice stones at 37°C has been studied. Among them the charcoal fixed film reactor showed the best performance when operated at 2 d hydraulic retention times (HRT), achieving maximum COD removal of 81% (COD influent=70 g/l) and improved total gas production (6.7 l/d/l digester) with high methane content (72%).     

Methane recovery from water hyacinth through whole-cell immobilization technology

The concepts of feed pretreatment, phase separation, and whole-cell immobilization technology have been incorporated in this investigation for the development of rational and cost-effective two- and three-stage methane recovery systems from water hyacinth (WH)Analyses of laboratory data reveal that a three-stage system could be designed with an alkali pretreatment stage [3.6% Na(2)CO(3) + 2.5% Ca(OH)(2) W/W, 24 h HRT] followed by an open acid reactor (2.1 days HRT) and closed immobilized methane reactor (12 h HRT), providing steady-state COD conversion of 62-65%, TVA conversion of 91-95%, and gas productivity of 4.08-5.36 L/L reactor volume/day with 82% methane. A gas yield of 50 L/kg WH/day (dry wt basis) at 35-37 degrees C is possible with this system. Insulation bricks, with particle size distribution of 500-3000 mum, were used as support material in the reactors at organic loading rate of 20 kg COD/m(3) day. The reactors matured in 15-18 weeksSubstantial reduction in retention time for the conversion of volatile acids in immobilized methane reactors prompted further research on the combined immobilized reactor to make possible an additional reduction in the cost of a WH-based biogas system. Evaluation of laboratory data reveals that a two-stage system could be designed with an open alkali pretreatment stage and a combined immobilized reactor (12 h HRT), providing steady-state COD conversion of 53% and gas productivity of 3.1 L/L reactor volume/day with 86% methane. A gas yield of 44 L/kg WH/day (dry wt basis) at 35-37 degrees C could be obtained from this system. Insulation bricks, with 500-1000 mum particle size distribution, was used as support material at an organic loading rate of 15 kg COD/m(3) day. Notwithstanding the fact that the technology in this study has been developed with water hyacinth as substrate, the implicit principles could be extended to any other organic substrate.     

On-line sterilization of cheese whey using ultraviolet radiation

The effectiveness of ultraviolet radiation for on-line sterilization of cheese whey was investigated. The effects of flow rate and residence time on the performance of three UV reactors having different gap sizes (18, 13, and 6 mm) were studied. Six flow rates and six residence times were tested with the three UV reactors. The cheese whey used in this study had a very high turbidity (4317 NTU), very poor transmittance in the UV radiation germicidal range ( approximately 0%), and high percentage of large solid particles ( approximately 20% > 100 microm). Although the cheese whey physical characteristics showed low probability of sterilization using UV radiation, the study showed that UV radiation can be used on-line to sterilize cheese whey if the proper reactor gap size and the appropriate residence time are used. There were combined effects of the flow rate and gap size. The cell removal efficiency increased with increases in residence time and decreases in the UV reactor gap size. Removal efficiency of 100% was not achieved in this study with the first UV reactor (18-mm gap size), whereas 100% removal efficiency was achieved with the second (13-mm gap size) and third (6-mm gap size) UV reactors at residence times of 2.0 and 0.5 h, respectively. The microbial decay rates achieved in this study were 4.94, 7.62, and 20.9 h(-)(1) using the first, second, and third UV reactor, respectively. Residence times of 3.3, 2.1, and 0.8 h would be required to completely destruct a microbial population of 5.95 x 10(6) cells/mL using the first, second, and third UV reactors, respectively. Although cheese whey sterilization using UV radiation seems to be a good alternative to pasteurization, increases in cheese whey temperature resulted in lamp fouling. If online sterilization is to be used, the fouling problem should be investigated and a maintenance scheme for the UV reactor should be developed.     

Granule development and performance in sucrose fed anaerobic baffled reactors

Two 90 L anaerobic baffled reactors were used to study the granulation of sludge and the effect of the organic loading rate and NaHCO3/COD ratios on reactor performance. Furthermore, it was determined whether an anaerobic baffled reactor would promote phase separation and if additive of bentonite or granular active carbon was capable of enhancing granule formation. In order to minimize feed variations, and have a totally biodegradable substrate, a synthetic sucrose substrate was used. Granulation was achieved in both reactors within 75 days. However, the granules from the granular active carbon amended reactor appeared earlier and were larger and more compact. The reactors were maintained at a hydraulic retention time of 20 h during performance study stage. The results showed that when organic loading rate were changed from 2.15 to 6.29 kg COD m(-3)day(-1), chemical oxygen demand (COD) removal was not decreased (91-93%), but a slight increase in effluent COD was observed. It was found that the COD removals were generally good (87-92%) and had not obviously change with the decreasing NaHCO3/COD ratios. From the bacterial distribution and the concentration of volatile fatty acids in four compartments, it was concluded that a separation of phases occurred within the anaerobic baffled reactors.     

Ethanol fermentation in a magnetically fluidized bed reactor with immobilized Saccharomyces cerevisiae in magnetic particles

Ethanol fermentation by immobilized Saccharomyces cerevisiae cells in magnetic particles was successfully carried out in a magnetically stabilized fluidized bed reactor (MSFBR). These immobilized magnetic particles solidified in a 2 % CaCl(2) solution were stable and had high ethanol fermentation activity. The performance of ethanol fermentation of glucose in the MSFBR was affected by initial particle loading rate, feed sugar concentration and dilution rate. The ethanol theoretical yield, productivity and concentration reached 95.3%, 26.7 g/L h and 66 g/L, respectively, at a particle loading rate of 41% and a feed dilution rate of 0.4 h(-1) with a glucose concentration of 150 g/L when the magnetic field intensity was kept in the range of 85-120 Oe. In order to use this developed MSFBR system for ethanol production from cheap raw materials, cane molasses was used as the main fermentation substrate for continuous ethanol fermentation with the immobilized S. cerevisiae cells in the reactor system. Molasses gave comparative ethanol productivity in comparison with glucose in the MSFBR, and the higher ethanol production was observed in the MSFBR than in a fluidized bed reactor (FBR) without a magnetic field.     

Electricity generation from young landfill leachate in a microbial fuel cell with a new electrode material

This study aims at evaluating the performance of a two-chambered continuously fed microbial fuel cell with new Ti–TiO₂ electrodes for bioelectricity generation from young landfill leachate at varying strength of wastewater (1–50 COD g/L) and hydraulic retention time (HRT, 0.25–2 days). The COD removal efficiency in the MFC increased with time and reached 45 % at full-strength leachate (50 g/L COD) feeding. The current generation increased with increasing leachate strength and decreasing HRT up to organic loading rate of 100 g COD/L/day. The maximum current density throughout the study was 11 A/m² at HRT of 0.5 day and organic loading rate of 67 g COD/L/day. Coulombic efficiency (CE) decreased from 57 % at feed COD concentration of 1 g/L to less than 1 % when feed COD concentration was 50 g/L. Increase in OLR resulted in increase in power output but decrease in CE.     

Influence of Nitrate and Sulfate on the Anaerobic Treatment of Pharmaceutical Wastewater

Anaerobic treatment of wastewater from the pharmaceutical industry, which contained about 3.2 g/L of sulfate, was carried out in an Upflow Anaerobic Sludge Blanket (UASB) reactor. After a startup period of 120 days, a chemical oxygen demand (COD) removal efficiency of more than 90 % was obtained along with an organic loading rate (OLR) of 1.5 g COD/(L day). During the same period, the sulfate removal was about 90 %. However, the performance of the reactor was affected when the loading rate was increased to 2.09 g COD/(L day). It was found that the accumulation of sulfides, combined with a decrease in the pH, affected the reactor performance. In batch reactor studies with pharmaceutical wastewater it was observed that methane production began only after the initiation of nitrate consumption. The denitrification process can inhibit sulfate reduction at high nitrate concentrations, but compared to reactors without nitrate, the sulfate reduction process and sulfide formation were quickly initiated at low nitrate concentrations. The methanogenic activity was however affected by the presence of more than 2 g/L of sulfate.     

Treatment of low strength soluble wastewaters in UASB reactors

Low strength wastewaters can be those with chemical oxygen demand (COD) below 2,000 mg/l. The anaerobic treatment of such wastewaters has not been fully explored so far. The suboptimal reaction rates with low substrate concentrations, and the presence of dissolved oxygen in the influent are regarded as possible constraints. In this study, the treatment of low strength soluble wastewaters containing ethanol or whey was studied in lab-scale upflow anaerobic sludged bed (UASB) reactors at 30°C. The high treatment performance obtained demonstrates that UASB reactors are viable for treating both types of wastewaters at low COD concentrations. The treatment of the ethanol containing wastewater resulted in COD removal efficiencies exceeding 95% at organic loading rates (OLR) between 0.3 to 6.8 g COD/l-d with influent concentrations in the range of 422 to 943 mg COD/l. In the case of the more complex whey containing wastewater, COD removal efficiencies exceeded 86% at OLRs up to 3.9 g COD/l·, as long as the COD influent was above 630 mg/l. Lowering the COD influent resulted in decreased efficiency with sharper decrease at values below 200 mg/l. Acidification instead of methanogenesis was found to be the rate limiting step in the COD removal at low concentrations, which was not the case when treating ethanol. The effect of dissolved oxygen in the influent as a potential danger in anaerobic treatment was investigated in reactors fed with and without dissolved oxygen. Compared with the control reactor, the reactor receiving oxygen showed no detrimental effects in the treatment performance. Thus, the presence of dissolved oxygen in dilute wastewaters is expected to be of minor importance in practice.     

Immobilized microbes and a high-rate, continuous waste processor for the production of high Btu gas and the reduction of pollutants

Microbes capable of degrading organic wastes (sewage) are densely packed (immobilized) within the pores of controlled-pore ceramics. When the ceramic displays the optimum pore range for the reproduction of these microbes, the minimum volume for a very efficient reactor is required. A two-stage, anaerobic, immobilized microbe reactor has been designed, and laboratoryscale units have been constructed. A few of these units have been operated continuously for two years. These reactors were designed for the efficent conversion of carbon to methane in biodegradable molecules and for the effective transfer of that gas. The reactors were operated at 20, 30, and 40 degrees C at residence times of 2-5.5 h. The total chemical oxygen demand (COD) of the sewage varied from 800-2600 mg/L. The resulting gas contained greater than 90% methane and less than 5% CO(2). Approximately 32-54% of the influent total carbon was recovered as methane. The reduction in COD varied from 63 to 89%.     

Anaerobic digestion of long-chain fatty acids in UASB and expanded granular sludge bed reactors

Solutions of sodium caprate and sodium laurate were digested in upflow anaerobic sludge bed (UASB) reactors inoculated with granular sludge and in expanded granular sludge bed (EGSB) reactors. UASB reactors are unsuitable if lipids contribute 50% or more to the COD of waste water: the gas production rate required to obtain sufficient mixing and contact cannot be achieved. At lipid loading rates exceeding 2–3 kg COD m⁻³ day⁻¹, total sludge wash-out occurred. At lower loading rates the system was unreliable, due to unpredictable sludge flotation. EGSB reactors do fulfil the requirements of mixing and contact. They accommodate space loading rates up to 30 kg COD m⁻³ day⁻¹ during digestion of caprate or laurate as sole substrate, at COD removal efficiencies of 83–91%, and can be operated at hydraulic residence times of 2 h without any problems. Augmentation of granular sludge in lab-scale EGSB reactors was demonstrated. The new granules had excellent settling properties. Floating layer formation, as well as mixing characteristics in full-scale EGSB reactors require further research.     

Continuous production of biohythane from hydrothermal liquefied cornstalk biomass via two-stage high-rate anaerobic reactors

Background

Biohythane production via two-stage fermentation is a promising direction for sustainable energy recovery from lignocellulosic biomass. However, the utilization of lignocellulosic biomass suffers from specific natural recalcitrance. Hydrothermal liquefaction (HTL) is an emerging technology for the liquefaction of biomass, but there are still several challenges for the coupling of HTL and two-stage fermentation. One particular challenge is the limited efficiency of fermentation reactors at a high solid content of the treated feedstock. Another is the conversion of potential inhibitors during fermentation. Here, we report a novel strategy for the continuous production of biohythane from cornstalk through the integration of HTL and two-stage fermentation. Cornstalk was converted to solid and liquid via HTL, and the resulting liquid could be subsequently fed into the two-stage fermentation systems. The systems consisted of two typical high-rate reactors: an upflow anaerobic sludge blanket (UASB) and a packed bed reactor (PBR). The liquid could be efficiently converted into biohythane via the UASB and PBR with a high density of microbes at a high organic loading rate.

Results

Biohydrogen production decreased from 2.34 L/L/day in UASB (1.01 L/L/day in PBR) to 0 L/L/day as the organic loading rate (OLR) of the HTL liquid products increased to 16 g/L/day. The methane production rate achieved a value of 2.53 (UASB) and 2.54 L/L/day (PBR), respectively. The energy and carbon recovery of the integrated HTL and biohythane fermentation system reached up to 79.0 and 67.7%, respectively. The fermentation inhibitors, i.e., 5-hydroxymethyl furfural (41.4–41.9% of the initial quantity detected) and furfural (74.7–85.0% of the initial quantity detected), were degraded during hydrogen fermentation. Compared with single-stage fermentation, the methane process during two-stage fermentation had a more efficient methane production rate, acetogenesis, and COD removal. The microbial distribution via Illumina MiSeq sequencing clarified that the biohydrogen process in the two-stage systems functioned not only for biohydrogen production, but also for the degradation of potential inhibitors. The higher distribution of the detoxification family Clostridiaceae, Bacillaceae, and Pseudomonadaceae was found in the biohydrogen process. In addition, a higher distribution of acetate-oxidizing bacteria (Spirochaetaceae) was observed in the biomethane process of the two-stage systems, revealing improved acetogenesis accompanied with an efficient conversion of acetate.

Conclusions

Biohythane production could be a promising process for the recovery of energy and degradation of organic compounds from hydrothermal liquefied biomass. The two-stage process not only contributed to the improved quality of the gas fuels but also strengthened the biotransformation process, which resulted from the function of detoxification during biohydrogen production and enhanced acetogenesis during biomethane production.

     

Simultaneous single-cell protein production and COD removal with characterization of residual protein and intermediate metabolites during whey fermentation by K. marxianus

Cheese whey fermentation with Kluyveromyces marxianus was carried out at 40 °C and pH 3.5 to examine simultaneous single-cell protein production and chemical oxygen demand (COD) removal, determine the fate of soluble whey protein and characterize intermediate metabolites. After 36 h of batch fermentation, the biomass concentration increased from 2.0 to 6.0 g/L with 55 % COD reduction (including protein), whereas soluble whey protein concentration decreased from 5.6 to 4.1 g/L. It was confirmed through electrophoresis (SDS-PAGE) that the fermented whey protein was different from native whey protein. HPLC and GC–MS analysis revealed a change in composition of organic compounds post-fermentation. High inoculum concentration in batch fermentation resulted in an increase in biomass concentration from 10.3 to 15.9 g/L with 80 % COD reduction (including protein) within 36 h with residual protein concentration of 4.5 g/L. In third batch fermentation, the biomass concentration increased from 7.3 to 12.4 g/L with 71 % of COD removal and residual protein concentration of 4.3 g/L after 22 h. After 22 h, the batch process was shifted to a continuous process with cell recycle, and the steady state was achieved after another 60 h with biomass yield of 0.19 g biomass/g lactose and productivity of 0.26 g/L h. COD removal efficiency was 78–79 % with residual protein concentration of 3.8–4.2 g/L. The aerobic continuous fermentation process with cell recycle could be applied to single-cell protein production with substantial COD removal at low pH and high temperature from cheese whey.     

Granulation mechanism of a UASB reactor supplemented with iron

The aim of this paper was to propose a granulation mechanism in order to interpret all the experimental observations that arose during experiments on two UASB reactors, where one was supplemented with ferrous iron at a dose of 0.01 g Fe(2+) per g COD feed. This supplementation with ferrous iron allowed COD removal of more than 98% at a loading rate of 9 g COD/L per day, which was 24% higher than for the reactor not receiving the ferrous iron. Moreover, in the Fe(2+)-dosed reactor, a higher increase of the granule diameter was observed. Indeed, the granule diameter in the Fe(2+)-dosed reactor at the end of the experiments was 56% greater than that of the control reactor. This mechanism describes the course of anaerobic granule growth. The formation of the inorganic precipitate of ferrous sulphide constitutes the inert nuclei around which the biomass is attached. This initiates the formation of new granules.     

Startup of anaerobic biofilm fluidized bed reactors on molasses and phenol under various conditions

Fluidized sand bed anaerobic biofilm reactors were operated in parallel to study the effects of inoculum, loading, residence time and carrier type on the startup dynamics for the degradation of molasses and phenol. Degradation rates generally depended most directly on concentrations rather than on other operating variables. Residence times did not appear to directly influence startup. Short residence times and high loadings gave the highest specific activities for both substrates. The type of inoculum was found to be most important for the molasses system, and inoculation on fresh carrier was found to be better than reinoculation. The two times higher specific biomass retention on Siran porous glass gave essentially the same degradation rates on a volume basis.List of Symbols L kg/h loading of reactor - M kg/kg biomass per carrier mass - Red. % reduction of feed concentration due to degradation - R kg/(m³ · h) reaction rate - S kg/m³ substrate concentration in reactor and effluent - S ₀ kg/m³ substrate concentration in feed - t h time     

Feasibility of expanded granular sludge bed reactors for the anaerobic treatment of low-strength soluble wastewaters

The application of the expanded granular sludge bed (EGSB) reactor for the anaerobic treatment of low-strength soluble wastewaters using ethanol as a model substrate was investigated in laboratory-scale reactors at 30oC. Chemical oxygen demand (COD) removal efficiency was above 80% at organic loading rates up to12 g COD/L . d with influent concentrations as low as 100 to 200 mg COD/L. These results demonstrate the suitability of the EGBS reactor for the anaerobic treatment of low-strength wastewaters. The high treatment performance can be attributed to the intense mixing regime obtained by high hydraulic and organic loads. Good mixing of the bulk liquid phase for the substrate-biomass contact and adequate expansion of the substrate-biomass contact and adequate expansion of the sludge bed for the degassing were obtained when the liquid upflow velocity (V(up)) was greater than 2.5 m/h. Under such conditions, an extremely low apparent K(s) value for acetoclastic methanogenesis of 9.8 mg COD/L was observed. The presence of dissolved oxygen in the wastewater had no detrimental effect on the treatment performance. Sludge piston flotation from pockets of biogas accumulating under the sludge bed occurred at V(up) lower than 2.5 m/h due to poor bed expansion. This problem is expected only in small diameter laboratory-scale reactors. A. more important restriction of the EGSB reactor was the sludge washout occurring at V(up) higher than 5.5 m/h and which was intensified at organic loads higher than 7 g COD/L. d due to buoyancy forces from the gas production. To achieve an equilibrium between the mixing intensity and the sludge hold-up, the operation should be limited to an organic loading rate of 7 g COD/L d. and to a liquid up-flow velocity between 2.5 and 5.5 m/h (c) 1994 John Wiley & Sons, Inc.     

Use of the UASB reactor for the anaerobic treatment of stillage from sugar cane molasses

The feasibility of applying the UASB concept for the anaerobic treatment of stillage of distilleries in the sugar producing area of Argentina was subject to study. Results obtained in a 100-L UASB reactor treating stillages with COD values between 35 and 100 g COD/L are presented. Loading rates of up to 24 g COD/L/day were applied with an average COD removal of 75% and a biogas production of more than 9 L/L/day, with an average methane content of 58%. The settling velocity distribution of sludge particles would indicate a good formation of biomass pellets. System interruptions of months without feed and at ambient temperature (20-24 degrees C) were well tolerated.