Junction sequences generated by ''one-ended transposition''.

In the presence of the cognate transposase, plasmids containing a single inverted repeat (IR) sequence of Tn21 or of Tn1721 can fuse efficiently with other plasmids ('one-ended transposition'). The junctions across the sequences of donor and recipient DNA in recombinants generated by this process have been determined. These show that the segment of donor DNA starts precisely at the IR sequence (it is variable at the other end), and is flanked by a direct repeat of host DNA (usually 5bp) that was present only once in the original host sequence. These are characteristics of recombinants generated by transposition of Tn21 and Tn1721 themselves, suggesting that the mechanism of one-ended transposition is very similar to that of the corresponding entire elements.     

Genetic and molecular characterization of Tn21, a multiple resistance transposon from R100.1.

Tge transposon Tn21 has been transposed from R100.1 to plasmid pACYC184 and, from the resulting recombinants, to plasmid R388. The sites of insertion and the orientation of the element in several pACYC184::Tn21 recombinants have been examined. Restriction enzyme analysis of these recombinants has resulted in a detailed map of Tn21; this is compared with the published maps of the relevant part of R100.1. Heteroduplex analysis has shown short inverted repeat sequences at the ends of the element. With various in vitro-generated deletion mutants of Tn21, the internal gene necessary for transposition (tnpA) was localized within the terminal 4.3 kilobases of the right-hand end of the element. Genetic analysis of transposition of Tn21 suggests that the process proceeds via cointegrates. Since the end products of transposition are simple recombinants of the element and the recipient replicon, Tn21 must contain a gene that codes for a resolvase type of activity (tnpR gene).     

Factors that affect transposition mediated by the Tn21 transposase

The frequencies of one-ended transposition mediated by the Tn21 transposase acting on plasmids containing 38-bp inverted repeat sequences (IRs) of both Tn21 and of Tn501/Tn1721 and Tn2501 were measured. The enzyme acted on all these IRs, but more efficiently on the homologous sequences. These differences were magnified when the enzyme acted on plasmids containing two copies of the IRs, inverted with respect to each other. The Tn21 enzyme did not recognize the IR of Tn3. The Tn501 transposase did not mediate measurable one-ended transposition of any of the plasmids used, including those containing an IR of Tn501.     

Effects of variation of inverted-repeat sequences on reactions mediated by the transposase of Tn21.

The frequencies of one-ended transposition and normal transposition of derivatives of Tn21 that contain mutant inverted-repeat sequences (IRs) have been measured. In general, there was a linear relationship between the log of the frequency of one-ended transposition of a mutant IR and the log of the frequency of normal transposition of an element flanked by a wild-type IR at one end and by the mutant IR at the other. This implied that one-ended and normal transposition share the rate-limiting step that determines the frequency of transposition and that both IRs are involved in the rate-limiting step in normal transposition. Surprisingly, it was found that only the outer 18 base pairs of the IR of Tn21 engaged accurately in both one-ended and normal transposition, at about 1% of the frequency of the wild-type IR.     

Tn4400, a compound transposon isolated from Bacteroides fragilis, functions in Escherichia coli.

Transfer factor pBFTM10, isolated from the obligate anaerobic bacterium Bacteroides fragilis, carries a clindamycin resistance determinant which we have suggested is part of a transposable element. DNA homologous to this determinant is found in many Clnr Bacteroides isolates, either in the chromosome or on plasmids. We have now established that Ccr resides on a transposon, Tn4400. In addition to the Ccr determinant that functions under anaerobic conditions in B. fragilis, Tn4400 also carries a determinant for tetracycline resistance (Tcr) which only functions in Escherichia coli under aerobic conditions. The presence of Tn4400 on pBFTM10 does not confer tetracycline resistance on B. fragilis cells containing it. DNA from pBFTM10 was cloned in E. coli, with pDG5 as the cloning vector, to form pGAT500. Using a mobilization assay involving pGAT500 and an F factor derivative, pOX38, we determined that a 5.6-kilobase region of pBFTM10 DNA was capable of mediating replicon fusion and transposition. Most of the mobilization products resulted from inverse transposition reactions, while some were the result of true cointegrate formation. Analysis of the cointegrate molecules showed that three were formed by the action of one of the ends of Tn4400 (IS4400), and one was formed by the action of the whole element (Tn4400). The cointegrate molecule carrying intact copies of Tn4400 at the junction of the two plasmids could resolve to yield an unaltered donor plasmid (pGAT500) and a conjugal plasmid containing a copy of Tn4400 or a copy of one insertion sequence element (pOX38::Tn4400 or pOX38::IS4400). Thus, Tn4400 is a compound transposon containing active insertion sequence elements as directly repeated sequences at its ends.     

Tn7 Transposition Creates a Hotspot for Homologous Recombination at the Transposon Donor Site

Homologous recombination at the bacterial transposon Tn7 donor site is stimulated 10-fold when Tn7 is activated to transpose at high frequency in RecD(-) Escherichia coli, where recombination is focused near the ends of double-chain breaks. This is observed as an increase in recombination between two lacZ heteroalleles when one copy of lacZ carries within it a Tn7 that is transposing at high frequency. This stimulation of recombination is dependent upon the presence of homology with the donor site, is independent of SOS induction, and is not due to a global stimulation of recombination. When stimulated by Tn7 transposition, the conversion events giving rise to Lac(+) recombinants occur preferentially at the site of Tn7, suggesting that transposition is stimulating gene conversion at the donor site. These results support the model that Tn7 transposition occurs by a ``cut and paste' mechanism, leaving a double-chain break at the donor site that is repaired by the host homologous recombination machinery; normally, repair would use homology in a sister chromosome to regenerate a copy of the transposon. This proposed series of events allows transposition that is nonreplicative, per se, to be effectively replicative.     

Transposon Tn7. cis-Acting sequences in transposition and transposition immunity

We have identified and characterized the cis-acting sequences at the termini of the bacterial transposon Tn7 that are necessary for its transposition. Tn7 participates in two kinds of transposition event: high-frequency transposition to a specific target site (attTn7) and low-frequency transposition to apparently random target sites. Our analyses suggest that the same sequences at the Tn7 ends are required for both transposition events. These sequences differ in length and nucleotide structure: about 150 base-pairs at the left end (Tn7L) and about 70 base-pairs at the right end (Tn7R) are necessary for efficient transposition. We also show that the ends of Tn7 are functionally distinct: a miniTn7 element containing two Tn7R ends is active in transposition but an element containing two Tn7L ends is not. We also report that the presence of Tn7's cis-acting transposition sequences anywhere in a target replicon inhibits subsequent insertion of another copy of Tn7 into either an attTn7 target site or into random target sites. The inhibition to an attTn7 target site is most pronounced when the Tn7 ends are immediately adjacent to attTn7. We also show that the presence of Tn7R's cis-acting transposition sequences in a target replicon is necessary and sufficient to inhibit subsequent Tn7 insertion into the target replicon.     

A facile and reversible method to decrease the copy number of the ColE1-related cloning vectors commonly used in Escherichia coli.

We report a technique which uses the cointegrate intermediate of transposon Tn1000 transposition as a means to lower the copy number of ColE1-type plasmids. The transposition of Tn1000 from one replicon to another is considered a two-step process. In the first step, the transposon-encoded TnpA protein mediates fusion of the two replicons to produce a cointegrate. In the second step, the cointegrate is resolved by site-specific recombination between the two transposon copies to yield the final transposition products: the target replicon with an integrated transposon plus the regenerated donor replicon. Using in vitro techniques, the DNA sequence of the Tn1000 transposon was altered so that cointegrate formation occurs but resolution by the site-specific recombination pathway is blocked. When this transposon was resident on an F factor-derived plasmid, a cointegrate was formed between a multicopy ColE1-type target plasmid and the conjugative F plasmid. Conjugational transfer of this cointegrate into a polA strain resulted in a stable cointegrate in which replication from the ColE1 plasmid origin was inhibited and replication proceeded only from the single-copy F factor replication origin. We assayed isogenic strains which harbored plasmids encoding chloramphenicol acetyltransferase to measure the copy number of such F factor-ColE1-type cointegrate plasmids and found that the copy number was decreased to the level of single-copy chromosomal elements. This method was used to study the effect of copy number on the expression of the fabA gene (which encodes the key fatty acid-biosynthetic enzyme beta-hydroxydecanoylthioester dehydrase) by the regulatory protein encoded by the fadR gene.     

Transposon Tn3-mediated replicon fusion

To investigate inter-replicon transposition of Tn3, we used the cosmid-phage λ packaging system coupled with density gradient fractionation and isolated recombinant molecules of different sizes.Cosmids derived from ampicillin-resistance-transducing phage were classified into four groups: (1) cosmid-Tn3 donor cointegrates considered as Tn3 transposition intermediates, (2) similar cointegrates carrying deletions of one copy of Tn3 and of adjacent cosmid DNA sequences, (3) cosmids carrying a single Tn3 insertion, and (4) cosmids carrying two independent Tn3 insertions.Genetic and biochemical studies indicated that cosmids isolated from ampicillin-resistance transductants were derived from the authentic cosmid-Tn3 donor cointegrate intermediates.     

Transposition of TnA does not generate deletions

Summary We have examined the incidence of loss of the TnA unit, Tn801, from RP1 under conditions where transposition of Tn801 to another replicon, R388, was readily detected. We found that the frequency of transposition of Tn801 from RP1 to R388 exceeded, by at least a factor of one hundred, the frequency at which it was deleted from RP1. We conclude that, in general, transposition of Tn801 does not generate derivatives of the donor plasmid which specifically lack Tn801. The relevance of these findings to the mechanism of transposition is discussed.     

Structure and stability of Tn9-mediated cointegrates. Evidence for two pathways of transposition

We have measured the frequency of Tn9 transposition and cointegrate formation in several different ways and have examined the stability of the cointegrates. We have also physically analyzed the structure of 40 independently derived cointegrate molecules. We present evidence here that Tn9, unlike the transposable element Tn3, does not transpose via an obligate cointegrate intermediate. We suggest that transposition of Tn9 leads to two, mutually exclusive, end-products: either direct insertion of the element into a recipient replicon (transposition), or fusion between donor and recipient replicons (cointegrate formation). This conclusion is based on our observations that, while Tn9-mediated cointegrates are very stable, they are formed at a rate lower than the transposition frequency. This finding is discussed in terms of current models for transposition.We also present evidence that clearly demonstrates the compound nature of Tn9. We find that the individual flanking IS1 elements are more active than the entire Tn9 transposon in cointegrate formation. In addition, we find that one IS1 element that is proximal to the cam gene promoter, is more active than the other, and suggest that the difference in activity might be due to differences in nucleotide sequence at their extremities.     

一种新颖的棉铃虫单粒包埋核多角体病毒表达系统

将含有低拷贝数的mini Freplicon、一个卡那霉素抗性基因和一个lacZα基因 8.6kb的DNA片段经同源重组置换到棉铃虫核型多角体病毒基因组中的多角体蛋白基因内 ,构建了既能在E .coli内复制又可在昆虫细胞内复制形成完整的病毒粒子棉铃虫核型多角体病毒Bacmid(HaBacmid HZ8)。另外将HaSNPV的多角体蛋白基因和P10启动子序列取代 pFastBacDual质粒上的AcMNPV的多角体启动子序列和P10启动子序列 ,构建插入HaSNPV多角体蛋白基因和P10启动子序列的HapFastBacPhP10供体质粒。利用HapFastBacPhP10供体质粒将eGFP基因转位至HZ8的Tn7附着位点上 ,随后将含有eGFP基因的重组HaBacmidDNA转染至HZAm1细胞内。转染 5d后 ,细胞核内能形成典型的多角体 ,在萤光显微镜下观察到细胞内显示出强烈的绿色萤光。结果证明我们构建的HaBactoBcac表达系统能有效的表达外源基因     

Inhibition of Tn554 transposition: Deletion analysis

Tn554, a transposon in Staphylococcus aureus that specifies resistance to erythromycin and spectinomycin, exhibits a high preference for a single chromosomal insertion site. If this site is already occupied by a copy of Tn554, the transposition of a second element is inhibited 100- to 1000-fold. This report defines the locus of the inhibitory activity and presents both a functional and a restriction map of Tn554. Fragments containing parts of Tn554 were cloned on an autonomously replicating plasmid. Those clones containing the "left" end of Tn554 strongly inhibited the transposition of an incoming, intact copy of Tn554. Analysis of deleted derivatives of these clones defined a locus tnpI, which is both necessary and sufficient for transpositional inhibition. This locus consists of the terminal 89 bp of the "left" end of Tn554. It is suggested that this terminal sequence acts to titrate a factor required for transposition.     

Diversity of Tn4001 Transposition Products: the Flanking IS256 Elements Can Form Tandem Dimers and IS Circles

We show that both flanking IS256 elements carried by transposon Tn4001 are capable of generating head-to-tail tandem copies and free circular forms, implying that both are active. Our results suggest that the tandem structures arise from dimeric copies of the donor or vector plasmid present in the population by a mechanism in which an IS256 belonging to one Tn4001 copy attacks an IS256 end carried by the second Tn4001 copy. The resulting structures carry abutted left (inverted left repeat [IRL]) and right (inverted right repeat [IRR]) IS256 ends. Examination of the junction sequence suggested that it may form a relatively good promoter capable of driving transposase synthesis in Escherichia coli. This behavior resembles that of an increasing number of bacterial insertion sequences which generate integrative junctions as part of the transposition cycle. Sequence analysis of the IRL-IRR junctions demonstrated that attack of one end by the other is largely oriented (IRL attacks IRR). Our experiments also defined the functional tips of IS256 as the tips predicted from sequence alignments, confirming that the terminal 4 bp at each end are indeed different. The appearance of these multiple plasmid and transposon forms indicates that care should be exercised when Tn4001 is used in transposition mutagenesis. This is especially true when it is used with naturally transformable hosts, such as Streptococcus pneumoniae, in which reconstitution of the donor plasmid may select for higher-order multimers.     

Avoiding self: two Tn7-encoded proteins mediate target immunity in Tn7 transposition.

The bacterial transposon Tn7 exhibits target immunity, a process that prevents Tn7 from transposing into target DNAs that already contain a copy of the transposon. This work investigates the mechanism of target immunity in vitro. We demonstrate that two Tn7-encoded proteins_TnsB, which binds specifically to the ends of Tn7, and TnsC, the ATP-dependent DNA binding protein_act as a molecular switch to impose immunity on target DNAs containing Tn7 (or just Tn7 ends). TnsC binds to target DNA molecules and communicates with the Tn7 transposition machinery; here we show that target DNAs containing Tn7 ends are also bound and subsequently inactivated by TnsB. Protein-protein interactions between TnsB and TnsC appear to be responsible for this inactivation; the target DNA promotes these interactions by tethering TnsB and TnsC in high local concentration. An attractive model that emerges from this work is that TnsB triggers the dissociation of TnsC from the Tn7 end-containing target DNA; that dissociation depends on TnsC's ability to hydrolyze ATP. We propose that these interactions between TnsB and TnsC not only prevent Tn7 from inserting into itself, but also facilitate the selection of preferred target sites that is the hallmark of Tn7 transposition.     

Characterization of in vitro constructed IS30-flanked transposons

In order to facilitate functional studies on the mobile genetic element IS30, a resident of the Escherichia coli chromosome, transposon structures with two copies of IS30 flanking the chloramphenicol-resistance gene cat were constructed in vitro. Transposons containing IS30 as direct repeats (Tn2700 and Tn2702) transpose from multicopy plasmids into the genome of phage P1-15, thus giving rise to special transduction for cat with frequencies between 10(-5) and 10(-8)/plaque-forming unit. In contrast, transposon structures with IS30 in inverted repeat (Tn2701 and Tn2703) showed no detectable (less than 10(-9] transposition activity in vivo. By restriction analysis, two insertion sites of Tn2700 and Tn2702 on the phage P1-15 genome were indistinguishable from those observed earlier with a single copy of the IS30 element. These two insertion sites were used several times independently by Tn2700 and Tn2702. This confirms the non-random target selection by the element and it indicates that transposition of Tn2700 and Tn2702 follows the same rules as that of IS30.     

Intermolecular Transposition of Is10 Causes Coupled Homologous Recombination at the Transposition Site

Interplasmid and chromosome to plasmid transposition of IS10 were studied by assaying inactivation of the phage 434 cI gene, carried on a low copy number plasmid. This was detected by the activity of the tet gene expressed from the phage 434 P(R) promoter. Each interplasmid transposition resulted in the fusion of the donor and acceptor plasmids into cointegrate structure, with a 9-bp duplication of the target DNA at the insertion site. Cointegrate formation was abolished in δrecA strains, although simple insertions of IS10 were observed. This suggests a two-stage mechanism involving IS10 conservative transposition, followed by homologous recombination between the donor and the acceptor. Two plasmids carrying inactive IS10 sequences were fused to cointegrates at a 100-fold lower frequency, suggesting that homologous recombination is coupled to and stimulated by the transposition event. Each IS10 transposition from the chromosome to the acceptor plasmid involved replicon fusion, providing a mechanism for IS10-mediated integration of extrachromosomal elements into the chromosome. This was accompanied by the formation of an additional copy of IS10 in the chromosome. Thus, like replicative transposition, conservative transposition of IS10 is accompanied by cointegrate formation and results in duplication of the IS10.     

Transformation of Lactobacillus plantarum with the plasmid pTV1 by electroporation

Abstract Lactobacillus plantarum ATCC 8014 was transformed with pTV1 by electroporation using a modification of a procedure described for Escherichia coli . The plasmid pTV1 which contains the pE194 replicon from Staphylococcus aureus and transposon Tn917 from Streptococcus faecalis was shown to replicate as a high copy number plasmid in L. plantarum , and the two encoded antibiotic resistance traits were expressed. Tn917 transposed with a high frequency into plasmid DNA of L. plantarum as shown by restriction enzyme analysis and Southern hybridization studies. There are no previous reports on transposition in the lactobacilli. This system may prove to be an important tool in further work on the genetics of these organisms.     

Conjugative transposition of Tn916: the transposon int gene is required only in the donor.

Conjugative transposition of transposon Tn916 has been shown to proceed by excision of the transposon in the donor strain and insertion of this element in the recipient. This process requires the product of the transposon int gene. We report here the surprising finding that the int gene is required only in the donor during conjugative transposition. We find that Tn916 int-1, whose int gene has been inactivated by an insertion mutation, transposes when a complementing wild-type int gene is present only in the donor during mating. When the int+ gene is present in a plasmid and is expressed from the spac promoter, conjugative transposition is very inefficient. However, when the Int+ function is supplied from a coresident distantly linked Tn916 tra-641 mutant, which is defective in a function required for conjugation, efficient conjugative transposition of Tn916 int-1 occurs. This suggests either that Int is not required for integration of Tn916 in gram-positive bacteria or that the protein is transferred from the donor to the transconjugant during the mating event. When the nonconjugative plasmid pAT145 was present in the donor, it was rarely cotransferred with Tn916. This suggests that complete fusion of mating cells is not common during conjugative transposition.