Graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose and study of its swelling, metal ion sorption and flocculation behaviour

The present paper reports the graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose by free radical polymerization using potassium peroxymonosulphate/thiourea redox system in an inert atmosphere. The reaction conditions for maximum grafting have been optimized by varying the reaction variables, including the concentration of N-vinylformamide (12.0 × 10⁻²–28.0 × 10⁻² mol dm⁻³), potassium peroxymonosulphate (4.0 × 10⁻³–12.0 × 10⁻³ mol dm⁻³), thiourea (1.2 × 10⁻³–4.4 × 10⁻³ mol dm⁻³), sulphuric acid (2.0 × 10⁻³–10.0 × 10⁻³ mol dm⁻³), sodium carboxymethylcellulose (0.2–1.8 g dm⁻³) along with time duration (60–180 min) and temperature (25–45° C). Water swelling capacity, metal ion sorption and flocculation studies of synthesized graft copolymer have been performed with respect to the parent polymer. The graft copolymer has been characterized by FTIR spectroscopy and thermogravimetric analysis.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Pine nut peroxidase immobilized on chitosan crosslinked with citrate and ionic liquid used in the construction of a biosensor

A biosensor based on the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI·Tf₂N) and a novel source of peroxidase (tissue from the pine nuts of Araucaria angustifolia) was constructed. This enzyme was immobilized on chitosan crosslinked with citrate and the biosensor used for the determination of rosmarinic acid by square-wave voltammetry. The peroxidase in the presence of hydrogen peroxide catalyzes the oxidation of rosmarinic acid to quinone and the electrochemical reduction of the product was obtained at a potential of +0.15 V vs. Ag/AgCl. Different analytical parameters influencing the biosensor response, that is, peroxidase units, pH, hydrogen peroxide concentration and parameters for the square-wave voltammetry (frequency, pulse amplitude and scan increment), were investigated. The best performance was observed for the biosensor under the following conditions: 1000 units mL⁻¹ peroxidase, pH 7.0 and 8.3 × 10⁻⁴ mol L⁻¹ hydrogen peroxide with a frequency of 30 Hz, pulse amplitude of 100 mV and scan increment of 5.0 mV. The biosensor gave a linear response to rosmarinic acid over the concentration range of 9.07 × 10⁻⁷ to 4.46 × 10⁻⁶ mol L⁻¹ with a detection limit of 7.25 × 10⁻⁸ mol L⁻¹. The recovery of rosmarinic acid in plant extracts ranged from 97.0% to 109.6% and the determination of this substance in these samples using the biosensor compared favorably with that using the capillary electrophoresis method.     

Quantification of hydrogen peroxide and glucose using 3-methyl-2-benzothiazolinonehydrazone hydrochloride with 10,11-dihydro-5H-benz(b,f)azepine as chromogenic probe

A sensitive, selective, and rapid enzymatic method is proposed for the quantification of hydrogen peroxide (H₂O₂) using 3-methyl-2-benzothiazolinonehydrazone hydrochloride (MBTH) and 10,11-dihydro-5H-benz(b,f)azepine (DBZ) as chromogenic cosubstrates catalyzed by horseradish peroxidase (HRP) enzyme. MBTH traps free radical released during oxidation of H₂O₂ by HRP and gets oxidized to electrophilic cation, which couples with DBZ to give an intense blue-colored product with maximum absorbance at 620 nm. The linear response for H₂O₂ is found between 5 × 10⁻⁶ and 45 × 10⁻⁶ mol L⁻¹ at pH 4.0 and a temperature of 25 °C. Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 0.415 × 10⁶ M⁻¹ min⁻¹ and 9.81 × 10⁻⁴ min⁻¹, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the cosubstrates were 163.2 min⁻¹ and 4.156 × 10⁶ L mol⁻¹ min⁻¹, respectively. This method can be incorporated into biochemical analysis where H₂O₂ undergoes catalytic oxidation by oxidase. Its applicability in the biological samples was tested for glucose quantification in human serum.     

Biosorption of nonylphenol on dead biomass of Rhizopus arrhizus encapsulated in chitosan beads

The nonylphenol (NP) biosorption and desorption potential for fungal biomass used under batch conditions was investigated using kinetics and isotherm models. Fungal biomass of Rhizopus arrhizus TISTR 3610 exhibited preferential uptake of NP, an endocrine disrupting chemicals. Sporangiospores, asexual spores, were immobilised in chitosan beads. The biosorption data of NP on the moist heat inactivated R. arrhizus–chitosan beads were analyzed using four popular adsorption isotherms and, by using non-linear least-regression with the solver add-in in Microsoft Excel, correlated in order with the Fritz–Schluender > Redlich–Peterson > Freundlich > Langmuir isotherms. The pseudo first-order kinetics was found to have the best fit with the experimental data. The diffusivity of NP in the R. arrhizus–chitosan beads was calculated using the shrinking core model, and the diffusivity values were in the ranges of 2.3736 × 10⁻⁴–1.8950 × 10⁻⁴ cm² s⁻¹. Desorption to recover the adsorbed NP from the beads was performed in methanol and was best described using a pseudo second-order kinetic model.     

Laccase-catalyzed oxidation of phenolic compounds in organic media

Rhus vernificera laccase-catalyzed oxidation of phenolic compounds, i.e., (+)-catechin, (−)-epicatechin and catechol, was carried out in selected organic solvents to search for the favorable reaction medium. The investigation on reaction parameters showed that optimal laccase activity was obtained in hexane at 30 °C, pH 7.75 for the oxidation of (+)-catechin as well as for (−)-epicatechin, and in toluene at 35 °C, pH 7.25 for the oxidation of catechol. E_a and Q₁₀ values of the biocatalysis in the reaction media of the larger log p solvents like isooctane and hexane were relatively higher than those in the reaction media of lower log p solvents like toluene and dichloromethane. Maximum laccase activity in the organic media was found with 6.5% of buffer as co-solvent. A wider range of 0–28 μg protein/ml in hexane than that of 0–16.7 μg protein/ml in aqueous medium was observed for the linear increasing conversion of (+)-catechin. The kinetic studies revealed that in the presence of isooctane, hexane, toluene and dichloromethane, the K_m values were 0.77, 0.97, 0.53 and 2.9 mmol/L for the substrate of (+)-catechin; 0.43, 0.34, 0.14 and 3.4 mmol/L for (−)-epicatechin; 2.9, 1.8, 0.61 and 1.1 mmol/L for catechol, respectively, while the corresponding V_max values were 2.1 × 10⁻², 2.3 × 10⁻², 0.65 × 10⁻² and 0.71 × 10⁻² δA/μg protein min); 1.8 × 10⁻², 0.88 × 10⁻², 0.19 × 10⁻² and 1.0 × 10⁻² δA/μg protein min); 0.48 × 10⁻², 0.59 × 10⁻², 0.67 × 10⁻² and 0.54 × 10⁻² δA/μg protein min), respectively. FT-IR indicated the formation of probable dimer from (+)-catechin in organic solvent. These results suggest that this laccase has higher catalytic oxidation capacity of phenolic compounds in suitable organic media and favorite oligomers could be obtained.     

ICChI, a glycosylated chitinase from the latex of Ipomoea carnea

A multi-functional enzyme ICChI with chitinase/lysozyme/exochitinase activity from the latex of Ipomoea carnea subsp. fistulosa was purified to homogeneity using ammonium sulphate precipitation, hydrophobic interaction and size exclusion chromatography. The enzyme is glycosylated (14–15%), has a molecular mass of 34.94 kDa (MALDI–TOF) and an isoelectric point of pH 5.3. The enzyme is stable in pH range 5.0–9.0, 80 °C and the optimal activity is observed at pH 6.0 and 60 °C. Using p-nitrophenyl-N-acetyl-β-d-glucosaminide, the kinetic parameters K_m, V_max, K_cat and specificity constant of the enzyme were calculated as 0.5 mM, 2.5 × 10⁻⁸ mol min⁻¹ μg enzyme⁻¹, 29.0 s⁻¹ and 58.0 mM⁻¹ s⁻¹ respectively. The extinction coefficient was estimated as 20.56 M⁻¹ cm⁻¹. The protein contains eight tryptophan, 20 tyrosine and six cysteine residues forming three disulfide bridges. The polyclonal antibodies raised and immunodiffusion suggests that the antigenic determinants of ICChI are unique. The first fifteen N-terminal residues G–E–I–A–I–Y–W–G–Q–N–G–G–E–G–S exhibited considerable similarity to other known chitinases. Owing to these unique properties the reported enzyme would find applications in agricultural, pharmaceutical, biomedical and biotechnological fields.     

In vitro cytogenetic effects of Andrographis paniculata (kalmegh) on arsenic

In vitro effects of arsenic in human peripheral lymphocytes (HPL) at three different doses – 3.6×10⁻⁴, 1.4×10⁻³ and 0.72×10⁻³ μM for 24 h before harvesting on sister chromatid exchanges (SCE), Cell cycle proliferative index/replicative index (CCPI/RI), %M₁, %M₂ and %M₃, population doubling time (PDT) and average generation time (AGT) were examined. Andrographis paniculata (commonly referred to as ‘kalmegh’) has been used for centuries in traditional Indian and Chinese herbal medicine as a safe, natural folk remedy for assorted health concerns. In the present study, kalmegh (0.01 μg/7 ml culture media) was used along with the highest dose of arsenic; the results showed that arsenic induced increase in these genotoxic endpoints were fairly diminished by kalmegh. In addition, mutagenic in vitro effect of ethyl methanesulphonate (EMS) was used as a positive control in this study. It is thus concluded from this study that Andrographis has a protective role in arsenic toxicity.     

Growth of dinoflagellates, Ceratium furca and Ceratium fusus in Sagami Bay, Japan: The role of temperature, light intensity and photoperiod

Seasonal changes of field populations and growth rates of two dinoflagellates, Ceratium furca and Ceratium fusus, were examined in the temperate coastal water of Sagami Bay, Japan. Weekly field sampling was conducted from August 2002 to August 2003, and laboratory experiments were also carried out to investigate effects of temperature, irradiance and photoperiod on the growth rates of these two Ceratium species. In the field, the abundances of both species increased significantly from April to August 2003, were gradually decreased from November 2002 and were not observed in January 2003. C. fusus was able to increase at lower temperatures in February 2003 compared to C. furca. In the laboratory, the two species did not grow at <10 °C or >32 °C. The highest specific growth rate of C. furca was 0.72 d⁻¹ at 24 °C and 600 μmol m⁻² s⁻¹. Optimum growth rates (>0.4 d⁻¹) of C. furca were observed at temperatures from 18 to 28 °C and at irradiances from 216 to 796 μmol m⁻² s⁻¹. The highest growth rate of C. fusus was 0.56 d⁻¹ at 26 °C and 216 μmol m⁻² s⁻¹. Optimum growth rates of C. fusus were observed at the same irradiance rage of C. furca, whereas optimum temperature range was narrower (26–28 °C). The growth curves of both species indicated saturation of the growth rates when light intensity was above 216 μmol m⁻² s⁻¹, and did not show photoinhibition at irradiances up to 796 μmol m⁻² s⁻¹. The specific growth rates of both Ceratium species were clearly decreased at L:D = 10:14 relative to those at L:D = 14:10 and L:D = 12:12. The present study indicates the two Ceratium species can adapt to a wide range of temperature and irradiance.     

Studies on the mechanism of action of isopropyl N-phenyl carbamate

The binding of [¹⁴C]isopropyl N-phenyl carbamate (IPC) to microtubular protein isolated from chick brains, and the effect of isopropyl N-phenyl carbamate (IPC) on the in vitro reassembly of microtubules was investigated. While [¹⁴C]colchicine binds to microtubular protein, [¹⁴C]IPC does not. Concentrations from 1 × 10⁻⁴ M to 1 × 10⁻³ M IPC do not prevent in vitro repolymerization of microtubular protein. IPC (1 × 10⁻⁴ M) does not affect the rate of reassembly of microtubules. We conclude that IPC does not exert its effect through an interaction with microtubular protein; we suggest that IPC probably interacts with microtubule organizing centers.     

Red tide blooms of Cochlodinium polykrikoides in a coastal cove

Successive blooms of the dinoflagellate Cochlodinium polykrikoides occurred in Pettaquamscutt Cove, RI, persisting from September through December 1980 and again from April through October 1981. Cell densities varied from <100 cells L⁻¹ at the onset of the bloom and reached a maximum density exceeding 3.4 × 10⁶ cells L⁻¹ during the summer of 1981. The bloom was mainly restricted to the mid to inner region of this shallow cove with greatest concentrations localized in surface waters of the southwestern region during summer/fall periods of both years. Highly motile cells consisting of single, double and multiple cell zooids were found as chains of 4 and 8 cells restricted to the late August/September periods. The highest cell densities occurred during periods when annual temperatures were between 19 and 28 °C and salinities between 25 and 30. A major nutrient source for the cove was Crying Brook, located at the innermost region at the head of the cove. Inorganic nitrogen (NH₃ and NO₂ + NO₃) from the brook was continually detectable throughout the study with maximum values of 57.5 and 82.5 μmol L⁻¹, respectively. Phosphate (PO₄-P) was always present in the source waters and rarely <0.5 μmol L⁻¹; silicate always exceeded 30 μmol L⁻¹ with maximum concentrations reaching 226 μmol L⁻¹. Chlorophyll a and ATP concentrations during the blooms varied directly with cell densities. Maximum Chl a levels were 218 mg m⁻³ and ATP-carbon was >20 g C m⁻³. Primary production by the dinoflagellate-dominated community during the bloom varied between 4.3 and 0.07 g C m⁻³ d⁻¹. Percent carbon turnover calculated from primary production values and ATP-carbon varied from 6 to 129% d⁻¹. The dinoflagellates dominated the entire summer period; other flagellates and diatoms were present in lesser amounts. A combination of low washout rate due to the cove dynamics, active growth, and life cycles involving cysts allowed C. polykrikoides to maintain recurrent bloom populations in this area.     

Control of flagellar motility in Euglena and Chlamydomonas : Microinjection of EDTA, EGTA, Mn, and Zn

When a Euglena, in a medium containing ATP, is microinjected with 7 × 10⁻¹⁴ l of 0.02 M EDTA, which binds Ca²⁺ and Mg²⁺, flagellar motility stops. Flagellar arrest in Chlamydomonas occurs with the injection of 2 × 10⁻¹⁴ l of 0.02 M EDTA. The injection of similar amounts (7 × 10⁻¹⁴ l in Euglena and 3 × 10⁻¹⁴ l in Chlamydomonas) of 0.02 M EGTA, which preferentially binds Ca²⁺, did not significantly alter flagellar motility. This suggests that a decrease in the internal Ca²⁺ concentration in Euglena or Chlamydomonas did not stimulate flagellar beating. Further, flagellar motility decreased when internal Mg²⁺ was chelated. The microinjection of Zn²⁺ into these cells caused a decrease in flagellar frequency analogous to the decrease in frequency caused by the injection of Ca²⁺ and EDTA. The microinjection of 7 × 10⁻¹⁴ l of 0.2 M Mn²⁺ caused an approx. 1.5-fold increase in Euglena flagellar motility. Chlamydomonas flagella, which cease to beat upon impalement in an Mg²⁺-free medium, resume a flagellar frequency of 18 Hz when injected with 3 × 10⁻¹⁴ l of 0.2 M Mn²⁺. In the experiments reported here, Mn²⁺ acts as an analog of Mg²⁺.     

Interactions between Prorocentrum donghaiense Lu and Scrippsiella trochoidea (Stein) Loeblich III under laboratory culture

Interactions between Prorocentrum donghaiense Lu and Scrippsiella trochoidea (Stein) Loeblich III, two species of causative bloom dinoflagellates in China, were investigated using bi-algal cultures under controlled laboratory conditions. The growth of P. donghaiense and S. trochoidea were significantly suppressed when the initial cell densities were set at 1.9 × 10⁴ cells mL⁻¹ or 1.9 × 10⁵ cells mL⁻¹ for P. donghaiense and 1.0 × 10⁴ cells mL⁻¹ for S. trochoidea when the initial size/density ratio was 1:1 or 10:1, respectively, but no out-competement was observed in either bi-algal culture by the end. The simultaneous assay on the culture filtrate showed that P. donghaiense filtrate prepared at a lower initial density (1.9 × 10⁴ cells mL⁻¹) stimulated the co-cultured S. trochoidea at a density of 1.0 × 10⁴ cells mL⁻¹, but filtrate at a higher density (1.9 × 10⁵ cells mL⁻¹) depressed its growth. Differently, the filtrate of S. trochoidea at a density of 1.0 × 10⁴ cells mL⁻¹ significantly suppressed the growth of P. donghaiense at a density of 1.9 × 10⁴ cells mL⁻¹, but had little stimulatory effect on P. donghaiense at a density of 1.9 × 10⁵ cells mL⁻¹compared to the control (P > 0.05). It is likely that these two species of microalgae interact with each other mainly by releasing allelochemical substance(s) into the culture medium, and a direct cell-to-cell contact was not necessary for their mutual interaction. We then quantify their interactions in the bi-algal culture by using a mathematical model. The estimated parameters from the model showed that the inhibition exerted by S. trochoidea on P. donghaiense was about 43 and 24 times stronger than the inhibitory effect that P. donghaiense exerted on S. trochoidea when the initial size/density were 1:1 and 10:1, respectively. S. trochoidea seemed to have a survival strategy that was superior to P. donghaiense in the bi-algal culture under controlled laboratory conditions. We also observed a closely positive relationship between the initial cell density and its effect on the co-cultured microalga by measuring the fluorenscence: filtrate prepared from higher initial cell density had stronger interference on the co-cultured microalga. Moreover, pre-treated under different temperature conditions (30 °C, 60 °C and 100 °C) would significantly changed the effect of culture filtrate on the co-cultured microalga. Result inferred that P. donghaiense or S. trochoidea would release allelochemicals into the bi-algal culture medium and the allelochemicals might be a mixture with temperature-sensitive components in it.     

Glycan-binding profile of a D-galactose binding lectin purified from the annelid, Perinereis nuntia ver. vallata

A lectin recognizing D-galactose was purified from the pacific annelid Perinereis nuntia ver. vallata (Polychaeta) by affinity chromatography. Hemagglutinating activity, with a very low titer suggesting the presence of lectin appeared in the supernatant from the homogenization of body with Tris-buffered saline. However, dialyzed supernatant from the precipitate homogenized by galactose in the buffer revealed strong hemagglutinating activity against human erythrocytes. The crude supernatant was applied onto lactosyl–agarose column, and only the supernatant eluted from precipitate with galactose was obtained a galactose-binding lectin with 32 kDa polypeptide was obtained from the supernatant of the precipitate, extracted in presence of galactose. It suggests that the lectin tightly binds with glycoconjugate as endogenous ligand(s) in the tissue. Hemagglutinating activity against trypsinized and glutaraldehyde-fixed human erythrocytes was specifically inhibited by D-galactose, N-acetyl-D-galactosamine, lactose, melibiose, and asialofetuin. Glycan-binding profile of the lectin analyzed by frontal affinity chromatography shows that the lectin recognizes branched complex type N-linked oligosaccharides and both type 1 (Galβ1-3GlcNAc) and type 2 (Galβ1-4GlcNAc) lactosamine. The surface plasmon resonance study of the lectin against asialofetuin showed the k_ass and k_diss values are 5.14 × 10⁴ M^− 1 s^− 1 and 2.9 × 10⁻³ s^− 1, respectively. The partial primary structure of the lectin reveals 182 amino acids with novel sequence.     

Electrogenerated chemiluminescence ethanol biosensor based on alcohol dehydrogenase functionalized Ru(bpy)3 doped silica nanoparticles

An ethanol biosensor, based on the electrogenerated chemiluminescence of Ru(bpy)₃²⁺-doped silica nanoparticles (RuSiNPs), was investigated in this study. The biosensor was a modified glassy carbon electrode, where alcohol dehydrogenase was crosslinked to RuSiNPs, and then immobilized on the electrode surface using chitosan. The results indicated that the biosensor exhibited excellent performance during ethanol determination with a wide linear range (10⁻⁷ to 10⁻² M), low detection limit (5.0 × 10⁻⁸ M) and good stability.     

Measurement of chloramphenicol by capillary zone electrophoresis following end-column amperometric detection at a carbon fiber micro-disk array electrode

Capillary zone electrophoresis was employed for the measurement of chloramphenicol using end-column amperometric detection with a carbon fiber micro-disk array electrode, at a constant potential of −1.00 V vs. saturated calomel electrode. The effect of oxygen in the buffer has been investigated. It is found that when the area of the carbon fiber electrode is smaller than 1.1 mm², the interference of oxygen can be overcome. In this procedure deoxygenation is not necessary. The effect of pH, the concentration of the buffer and the high separation voltage across the capillary on the migration time, electrophoretic peak current and separation efficiency has been studied. The optimum conditions of separation and detection are 8.4×10⁻⁴ mol/l HOAc–3.2×10⁻³ mol/l NaOAc for the buffer solution, 20 kV for the separation voltage, 5 kV and 5 s for the injection voltage and the injection time, respectively. The calibration plot was found to be linear in the range 5×10⁻⁶ to 1×10⁻³ mol/l and the limit of detection is 9.1×10⁻⁷ mol/l or 1.4 fmol (S/N=2). The relative standard deviation is 1.1% for the migration time and 2.3% for the electrophoretic peak current. The method was applied to the determination of chloramphenicol in human serum.     

Effect of dietary chitosans on trace iron, copper and zinc in mice

Dietary chitosans with different molecular weight M_w and the degree of deacetylation DDA (high molecular weight chitosan HCS with M_w 7.60 × 10⁵ and DDA 85.5%, middle molecular weight chitosan MCS with M_w 3.27 × 10⁴ and DDA 85.2%, chito-oligomer COS with M_w 0.99 × 10³ and DDA 85.7% and water-soluble chitosan WSC with M_w 3.91 × 10⁴ and DDA 52.6%) were used at the 1.05% level to feed mice for 90 days. Afterwards no pathological symptoms, clinical signs or deaths were observed. The body weight of mice in chitosan group and control group showed no significant difference. Although HCS, COS and WSC had no significant effect on the level of Fe, Zn and Cu in the tested mice’s liver, spleen, heart and kidney, MCS significantly increased the level of Fe, Zn and Cu in liver. Therefore dietary ingestion of chitosan did not depress the level of Fe, Zn and Cu in mice.     

Zinc oxide/redox mediator composite films-based sensor for electrochemical detection of important biomolecules

Electrochemical oxidation of serotonin (SN) onto zinc oxide (ZnO)-coated glassy carbon electrode (GCE) results in the generation of redox mediators (RMs) that are strongly adsorbed on electrode surface. The electrochemical properties of zinc oxide-electrogenerated redox mediator (ZnO/RM) (inorganic/organic) hybrid film-coated electrode has been studied using cyclic voltammetry (CV). The scanning electron microscope (SEM), atomic force microscope (AFM), and electrochemical techniques proved the immobilization of ZnO/RM core/shell microparticles on the electrode surface. The GCE modified with ZnO/RM hybrid film showed two reversible redox peaks in acidic solution, and the redox peaks were found to be pH dependent with slopes of −62 and −60 mV/pH, which are very close to the Nernst behavior. The GCE/ZnO/RM-modified electrode exhibited excellent electrocatalytic activity toward the oxidations of ascorbic acid (AA), dopamine (DA), and uric acid (UA) in 0.1 M phosphate buffer solution (PBS, pH 7.0). Indeed, ZnO/RM-coated GCE separated the anodic oxidation waves of DA, AA, and UA with well-defined peak separations in their mixture solution. Consequently, the GCE/ZnO/RMs were used for simultaneous detection of DA, AA, and UA in their mixture solution. Using CV, calibration curves for DA, AA, and UA were obtained over the range of 6.0 × 10⁻⁶ to 9.6 × 10⁻⁴ M, 1.5 × 10⁻⁵ to 2.4 × 10⁻⁴ M, and 5.0 × 10⁻⁵ to 8 × 10⁻⁴ M with correlation coefficients of 0.992, 0.991, and 0.989, respectively. Moreover, ZnO/RM-modified GCE had good stability and antifouling properties.     

Fatty acid transport and activation and the expression patterns of genes involved in fatty acid trafficking

These studies defined the expression patterns of genes involved in fatty acid transport, activation and trafficking using quantitative PCR (qPCR) and established the kinetic constants of fatty acid transport in an effort to define whether vectorial acylation represents a common mechanism in different cell types (3T3-L1 fibroblasts and adipocytes, Caco-2 and HepG2 cells and three endothelial cell lines (b-END3, HAEC, and HMEC)). As expected, fatty acid transport protein (FATP)1 and long-chain acyl CoA synthetase (Acsl)1 were the predominant isoforms expressed in adipocytes consistent with their roles in the transport and activation of exogenous fatty acids destined for storage in the form of triglycerides. In cells involved in fatty acid processing including Caco-2 (intestinal-like) and HepG2 (liver-like), FATP2 was the predominant isoform. The patterns of Acsl expression were distinct between these two cell types with Acsl3 and Acsl5 being predominant in Caco-2 cells and Acsl4 in HepG2 cells. In the endothelial lines, FATP1 and FATP4 were the most highly expressed isoforms; the expression patterns for the different Acsl isoforms were highly variable between the different endothelial cell lines. The transport of the fluorescent long-chain fatty acid C₁-BODIPY-C₁₂ in 3T3-L1 fibroblasts and 3T3-L1 adipocytes followed typical Michaelis–Menten kinetics; the apparent efficiency (k_cat/K_T) of this process increases over 2-fold (2.1 × 10⁶–4.5 × 10⁶ s⁻¹ M⁻¹) upon adipocyte differentiation. The V_max values for fatty acid transport in Caco-2 and HepG2 cells were essentially the same, yet the efficiency was 55% higher in Caco-2 cells (2.3 × 10⁶ s⁻¹ M⁻¹ versus 1.5 × 10⁶ s⁻¹ M⁻¹). The kinetic parameters for fatty acid transport in three endothelial cell types demonstrated they were the least efficient cell types for this process giving V_max values that were nearly 4-fold lower than those defined form 3T3-L1 adipocytes, Caco-2 cells and HepG2 cells. The same cells had reduced efficiency for fatty acid transport (ranging from 0.82 × 10⁶ s⁻¹ M⁻¹ to 1.35 × 10⁶ s⁻¹ M⁻¹).     

Characterization, dynamics, and ecological impacts of harmful Cochlodinium polykrikoides blooms on eastern Long Island, NY, USA

We report on the emergence of Cochlodinium polykrikoides blooms in the Peconic Estuary and Shinnecock Bay, NY, USA, during 2002–2006. Blooms occurred during late summer when temperatures and salinities ranged from 20 to 25 °C and 22 to 30 ppt, respectively. Bloom patches achieved cell densities exceeding 10⁵ ml⁻¹ and chlorophyll a levels exceeding 100 μg l⁻¹, while background bloom densities were typically 10³–10⁴ cells ml⁻¹. Light, scanning electron and ultrathin-section transmission electron microscopy suggested that cells isolated from blooms displayed characteristics of C. polykrikoides and provide the first clear documentation of the fine structure for this species. Sequencing of a hypervariable region of the large subunit rDNA confirmed this finding, displaying 100% similarity to other North American C. polykrikoides strains, but a lower similarity to strains from Southeast Asia (88–90%). Bioassay experiments demonstrated that 24 h exposure to bloom waters (>5 × 10⁴ cells ml⁻¹) killed 100% of multiple fish species (1-week-old Cyprinodon variegates, adult Fundulus majalis, adult Menidia menidia) and 80% of adult Fundulus heteroclitus. Microscopic evaluation of the gills of moribund fish revealed epithelial proliferation with focal areas of fusion of gill lamellae, suggesting impairment of gill function (e.g. respiration, nitrogen excretion, ion balance). Lower fish mortality was observed at intermediate C. polykrikoides densities (10³–10⁴ cells ml⁻¹), while fish survived for 48 h at cell densities below 1 × 10³ cells ml⁻¹. The inability of frozen and thawed-, or filtered (0.2 μm)-bloom water to cause fish mortality suggested that the thick polysaccharide layer associated with cell membranes and/or a toxin principle within this layer may be responsible for fish mortality. Juvenile bay scallops (Argopecten irradians) and American oysters (Crassostrea virginica) experienced elevated mortality compared to control treatments during a 9-day exposure to bloom water (5 × 10⁴ cells ml⁻¹). Surviving scallops exposed to bloom water also experienced significantly reduced growth rates. Moribund shellfish displayed hyperplasia, hemorrhaging, squamation, and apoptosis in gill and digestive tissues with gill inflammation specifically associated with areas containing C. polykrikoides cells. In summary, our results indicate C. polykrikoides blooms have become annual events on eastern Long Island and that bloom waters are capable of causing rapid mortality in multiple species of finfish and shellfish.