Luminescence in Li3Al2(PO4)3:Eu2+

A series of efficient Li₃Al₂(PO₄)₃:Eu²⁺ novel phosphors were synthesized by the facile combustion method. The effects of dopant on the luminescence behavior of Li₃Al₂(PO₄)₃ phosphor were also investigated. The phosphors were characterized by X‐ray diffraction, field emission scanning electron microscope and photoluminescence techniques. The result shows that all samples can be excited efficiently by near‐ultraviolet excitation under 310 nm. The emission was observed for Li₃Al₂(PO₄)₃:Eu²⁺ phosphor at 425 nm, which corresponded to the d → f transition. The concentration quenching of Eu²⁺ was observed in Li₃Al₂(PO₄)₃:Eu²⁺ when the Eu concentration was at 0.5 mol%. The prepared powders exhibited intense blue emission at the 425 nm owing to the Eu²⁺ ion by Hg‐free excitation at 310 nm (i.e., solid‐state lighting excitation). Consequently, the availability of such a phosphor will significantly help in the development of blue‐emitting solid‐state lighting applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Bidimensional self-assembling of [Hg(RPhNNNPhR′)2] (R = acetyl, R′ = F) through metal-η-arene π-interactions and non classical C-H?O bonding: Synthesis and X-ray characterization of a bis diaryl asymmetric-substituted triazenide complex polymer of Hg(II)

Deprotonated 3-(2-fluorophenyl)-1-(4-acetylphenyl)triazene reacts with Hg(CH₃COO)₂ in tetrahydrofuran to give light yellow crystals of [Hg^II(RPhNNNPhR′)₂]_n (R = acetyl, R′ = F). The new polymeric triazenide complex of Hg(II) belongs to the monoclinic space group C2/c. The lattice of [Hg^II(RPhNNNPhR′)₂]_n can be viewed as a bidimensional assembly of planar tectons [Hg^II(RPhNNNPhR′)₂], occurring through metallocene alike Hg(II)-η²,η²-arene π-interactions along the crystallographic axis b and non classical C-H?O bonding along the axis a.     

Energy transfer in M5(PO4)3 F:Eu2+,Ce3+ (M = Ca and Ba) phosphors

M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) co‐doped with Ce³⁺ phosphors were successfully prepared by the combustion synthesis method. The introduction of co‐dopant (Ce³⁺) into the host enhanced the luminescent intensity of the M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) efficiently. Previously, we have reported the synthesis and photoluminescence properties of same phosphors. The aim of this article is to report energy transfer mechanism between Ce³⁺?Eu²⁺ ions in M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) phosphors, where Ce³⁺ ions act as sensitizers and Eu²⁺ ions act as activators. The M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) co‐doped with Ce³⁺ phosphor exhibits great potential for use in white ultraviolet (UV) light‐emitting diode applications to serve as a single‐phased phosphor that can be pumped with near‐UV or UV light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Impact of ligand environment on optical,luminescence and thermometric behavior of A3(PO4)2:Sm3+ (A = Ca,Sr) phosphors

The present study investigates the impact of the ligand environment on the luminescence and thermometric behavior of Sm³⁺ doped A₃(PO₄)₂ (A = Sr, Ca) phosphors prepared by combustion synthesis. The structural and luminescent properties of Sm³⁺ ions in the phosphate lattices were investigated using powder X-ray diffraction (PXRD) and photoluminescence (PL) techniques. PXRD results of the synthesized phosphors exhibit the expected phases that are in agreement with their respective standards. Fourier-transform infrared (FTIR) spectroscopy confirms the presence of PO₄ vibrational bands. Upon excitation with near ultraviolet light, the PL studies indicated that Sr₃(PO₄)₂:Sm³⁺ phosphors exhibit a yellow light emission, whereas Ca₃(PO₄)₂:Sm³⁺ phosphors exhibit an emission of orange light. The PL emission results are in accordance with the CIE coordinates, with the Sr₃(PO₄)₂:Sm³⁺ phosphors showing coordinates of (0.56, 0.44), and the Ca₃(PO₄)₂:Sm³⁺ phosphors displaying coordinates of (0.60, 0.40). Thermal analysis shows improved stability of Ca₃(PO₄)₂:Sm³⁺ based on lower weight reduction in thermogravimetric analysis. The effect of temperature on the luminescence properties of the phosphor has been examined upon a 405 nm excitation. By using the fluorescence intensity ratio (FIR) method, the temperature responses of the emission ratios from the Sm³⁺: the ⁴F_3/2 → ⁶H_5/2 transition to the ⁴G_5/2 → ⁶H_7/2 and ⁴F_3/2 → ⁶H_5/2 transition to the ⁴G_5/2 → ⁶H_9/2 emissions are characterized. The Ca₃(PO₄)₂:Sm³⁺ phosphors are more sensitive as compared with the Sr₃(PO₄)₂:Sm³⁺ phosphors. The earlier research findings strongly indicate that these phosphors hold great promise as ideal candidates for applications in non-invasive optical thermometry and solid-state lighting devices.     

Optical properties and energy transfer of Eu2+/Ce3+ co‐activated Na3Ca6(PO4)5 phosphor

Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ phosphors were prepared using a combustion‐assisted synthesis method. X‐Ray powder diffraction (XRD) analysis confirmed the formation of a Na₃Ca₆(PO₄)₅ crystal phase. Na₃Ca₆(PO₄)₅:Eu²⁺ phosphors have an efficient bluish‐green emission band that peaks at 489 nm, whereas Ce³⁺‐doped Na₃Ca₆(PO₄)₅ showed a bright emission band at 391 nm. Analysis of the experimental results suggests that enhancement of the Eu²⁺ emission intensity in co‐doped Na₃Ca₆(PO₄)₅:Eu²⁺,Ce³⁺ phosphors is due to a resonance‐type energy transfer from Ce³⁺ to Eu²⁺ ions, which is predominantly governed by an exchange interaction mechanism. These results indicate that Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ is potentially useful as a highly efficient, bluish‐green emitting, UV‐convertible phosphor for white‐light‐emitting diodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhancement of the luminescence properties of Sr3(PO4)2:Dy3+,Li+ white‐light‐emitting phosphors by charge compensator Li+ co‐doping

Sr₃(PO₄)₂:Dy³⁺,Li⁺ phosphors were prepared using a simple high temperature solid method for luminescence enhancement. The structures of the as‐prepared samples agreed well with the standard phase of Sr₃(PO₄)₂, even when Dy³⁺ and Li⁺ were introduced. Under ultraviolet excitation at 350 nm, the Sr₃(PO₄)₂:Dy³⁺ sample exhibited two emission peaks at 483 nm and 580 nm, which were due to the ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁶H_13/2 transitions of Dy³⁺ ions, respectively. A white light was fabricated using these two emissions from the Sr₃(PO₄)₂:Dy³⁺ phosphors. The luminescence properties of Sr₃(PO₄)₂:Dy³⁺,Li⁺ phosphors, including emission intensity and decay time, were improved remarkably with the addition of Li⁺ as the charge compensator, which would promote their application in near‐ultraviolet excited white‐light‐emitting diodes.     

Speciation, stability constants and structures of complexes of copper(II), nickel(II), silver(I) and mercury(II) with PAMAM dendrimer and related tetraamide ligands

The acid-base properties and Cu(II), Ni(II), Ag(I) and Hg(II) binding abilities of PAMAM dendrimer, L, and of the simple model compounds, the tetraamides of EDTA and PDTA, L¹, were studied in solution by pH-metric methods and by ¹H NMR and UV-Vis spectroscopy. PAMAM is hexabasic and six pK_a values have been determined and assigned. PAMAM forms five identifiable complexes with copper(II), [CuLH₄]⁶⁺, [CuLH₂]⁴⁺, [CuLH]³⁺, [CuL]²⁺ and [CuLH_-1]⁺ in the pH range 2-11 and three with nickel(II), [NiLH]³⁺, [NiL]²⁺ and [NiLH_-1]⁺ in the pH range 7-11. The complex [CuLH₄]⁶⁺, which contains two tertiary nitrogen and three amide oxygen atoms coordinated to the metal ion, is less stable than the analogous EDTA and PDTA tetraamide complexes [CuL¹]²⁺, which contain two tertiary nitrogen and four amide oxygen atoms, due to ring size and charge effects. With increasing pH, [CuLH₄]⁶⁺ undergoes deprotonation of two coordinated amide groups to give [CuLH₂]⁴⁺ with a concomitant change from O-amide to N-amidate coordination. Surprisingly and in contrast to the tetraamide complexes [CuL¹]²⁺, these two deprotonation steps could not be separated. As expected the nickel(II) complexes are less stable than their copper(II) analogues. The tetra-N-methylamides of EDTA, L¹(b), and PDTA form mononuclear and binuclear complexes with Hg(II). In the case of L¹(b) these have stoichiometries HgL¹(b)Cl₂, [HgL¹(b)H₋₂Cl₂]²⁻, [Hg₂L¹(b)Cl₂]²⁺, Hg₂L¹(b)H₋₂Cl₂ and [Hg₂L¹(b)H₋₅Cl₂]³⁻. Based on ¹H NMR and pH-metric data the proposed structure for HgL¹(b)Cl₂, the main tetraamide ligand containing species in the pH range <3-6.5, contains L¹(b) coordinated to the metal ion through the two tertiary nitrogens and two amide oxygens while the structure of [HgL¹(b)H₋₂Cl₂]²⁻, the main tetraamide ligand species at pH 7.5-9.0, contains the ligand similarly coordinated but through two amidate nitrogen atoms instead of amide oxygens. The proposed structure of [Hg₂L¹(b)Cl₂]²⁺, a minor species at pH 3-6.5, also based on ¹H NMR and pH-metric data, contains each Hg(II) coordinated to a tertiary amino nitrogen, two amide oxygens and a chloride ligand while that of [Hg₂L¹(b)H₋₅Cl₂]³⁻, contains each Hg(II) coordinated to a tertiary amino nitrogen, two amidate nitrogens, a chloride and a hydroxo ligand in the case of one of the Hg(II) ions. The parent EDTA and PDTA amides only form mononuclear complexes. PAMAM also forms dinuclear as well as mononuclear complexes with mercury(II) and silver(I). In the pH range 3-11 six complexes with Hg(II) i.e. [HgLH₄Cl₂]⁴⁺, [HgLH₃Cl₂]³⁺, [Hg₂LCl₂]²⁺, [Hg₂LH₋₁Cl₂]⁺, [HgLH₋₁Cl₂]⁻ and [HgLH₋₂Cl₂]²⁻ were identified and only two with Ag(I), [AgLH₃]⁴⁺ and [Ag₂L]²⁺. Based on stoichiometries, stability constant comparisons and ¹H NMR data, structures are proposed for these species. Hence [HgLH₄Cl₂]⁴⁺ is proposed to have a similar structure to [CuLH₄]⁶⁺ while [Hg₂LCl₂]²⁺has a similar structure to [Hg₂L¹(b)H₋₅Cl₂]³⁻.     

Enhanced orange–red emission of SrZn2(PO4)2:Sm3+ via codoping Eu2+ as a sensitizer

A series of Eu²⁺‐, Sm³⁺‐ and Eu²⁺/Sm³⁺‐doped SrZn₂(PO₄)₂ samples were synthesized using a solid‐state reaction. SrZn₂(PO₄)₂:Eu²⁺ presented a broad emission band due to 4f⁶5d–4f⁷ transition of the Eu²⁺ ion. The spectra of SrZn₂(PO₄)₂:Sm sintered in air and H₂/N₂ were identical in every aspect, except for a very small difference in intensity. A Eu²⁺–Sm³⁺ energy transfer scheme was proposed to realize the sensitization of Sm³⁺ ion emission by Eu²⁺ ions, and UV‐convertible Sm³⁺‐activated red phosphor was obtained in SrZn₂(PO₄)₂:Eu²⁺, Sm³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

The chemistry of uranium dispersion in groundwaters at the Pinhal do Souto Mine,Portugal

Solution studies of H-autunite, H₂(UO₂)₂(PO₄)₂, and its K⁺, Na⁺, Li⁺, Ca²⁺, Mg²⁺, Cu²⁺ and Ni²⁺ analogues, have been carried out and solution stability constants determined. These values are in excellent agreement with those recently reported by other workers at 298.2 K and ionic strength equal to zero. separate field study involving groundwaters collected from the oxidized zone of the Pinhal do Souto mine, Portugal, has been undertaken. Here the principal uranium minerals are autunite, Ca(UO₂)₂(PO₄)₂·nH₂O and torbernite Cu(UO₂)₂(PO₄)₂·nH₂O. Detailed analyses of and calculations of species distributions in these samples indicate that currently circulating groundwaters are undersaturated with respect to these two minerals by two to four orders of magnitude. The mineralogical and geochemical significance of these results is discussed.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.     

Photoluminescence properties of LiTi2 − xEux(PO4)3 phosphor

A solid‐state reaction route‐based LiTi_{2 ? x}Eu_x(PO₄)₃ was phosphor synthesized for the first time to evaluate its luminescence performance by excitation, emission and lifetime (τ) measurements. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was excited at λ_exci. = 397 nm to give an intense orange–red (597 nm) emission attributed to the ⁵D₀ → ⁷F₁ magnetic dipole (ΔJ = ±1) transition and red (616 nm) emission (⁵D₀ → ⁷F₂), which is an electric dipole (ΔJ = ±2) transition of the Eu³⁺ ion. Beside this, excitation and emission spectra of host LiTi₂(PO₄)₃ powder were also reported. The effect of Eu³⁺ concentration on luminescence characteristics was explained from emission and lifetime profiles. Concentration quenching in the LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was studied from the Dexter's model. Dipole–quadrupole interaction is found to be responsible for energy transfer among Eu³⁺ ions in the host lattice. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor displayed a reddish‐orange colour realized from a CIE chromaticity diagram. We therefore suggest that this new phosphor could be used as an optical material of technological importance in the field of display devices. Copyright © 2016 John Wiley & Sons, Ltd.     

A Simple and Rapid Resonance Scattering Spectral Method for Detection of Trace Hg<Superscript>2+</Superscript> Using Aptamer-Nanogold as Probe

Single-strand deoxyribonucleic acid (ssDNA) were used to modified nanogold particle to obtain a aptamer-nanogold probe (NGssDNA) for Hg(II). The probe is not aggregated in high concentration of NaCl. In the pH 7.0 Na₂HPO₄-NaH₂PO₄ buffer solution and in the presence of high concentration of NaCl, NGssDNA interact with Hg(II) to form stable double-strand T-Hg(II)-T mismatches and to release nanogold particles from the probe. The released nanogold particles aggregated to form bigger clusters which leaded the resonance scattering (RS) intensity at 540 nm enhanced linearly with the concentration of Hg²⁺ in the range of 0.39–1666.7 nM, with detection of 0.1 nM. This simple, rapid, and sensitive aptamer-nanogold RS assay was applied to determination of Hg²⁺ in wastewater, with satisfactory results.     

Synthesis and X-ray structures of triphenylphosphine-mercury(II) thiosalicylate complexes: novel aggregation processes

Reaction of [HgCl₂(PPh₃)₂] with one equivalent of thiosalicylic acid (tsalH₂, HSC₆H₄CO₂H) and excess triethylamine, followed by recrystallisation from dichloromethane-diethyl ether gives the compound [Hg₂(tsal)₂(PPh₃)₂] (2). This has a bis(S,O)-chelated mercury centre with a nido-trigonal bipyramidal coodination, with the four oxygens of the two carboxylates also coordinated to a Hg(PPh₃)₂ moiety. When a reduced quantity of pyridine was used as the base a different crystalline product was isolated. This was characterised as [Hg₂(tsal)₂(PPh₃)₂][Hg(tsalH)₂] (3), which contains the same [Hg₂(tsal)₂(PPh₃)₂] moiety found for 2, co-crystallised with a [Hg(tsalH)₂]. The two mercury-thiosalicylate species are connected by means of O-H?O hydrogen bonding.     

Electrochemical and Structural Investigation of Calcium Substituted Monoclinic Li3V2(PO4)3 Anode Materials for Li‐Ion Batteries

In this work, the effect of Li⁺ substitution in Li₃V₂(PO₄)₃ with a large divalent ion (Ca²⁺) toward lithium insertion is studied. A series of materials, with formula Li_3?2xCa_xV₂(PO₄)₃/C (x = 0, 0.5, 1, and 1.5) is synthesized and studied in the potential region 3–0.01 V versus Li⁺/Li. Synchrotron diffraction demonstrates that Li₃V₂(PO₄)₃/C has a monoclinic structure (space group P2₁/n), while Ca_1.5V₂(PO₄)₃/C possesses a rhombohedral structure (space group R‐3c). The intermediate compounds, Li₂Ca_0.5V₂(PO₄)₃/C and LiCaV₂(PO₄)₃/C, are composed of two main phases, including monoclinic Li₃V₂(PO₄)₃/C and rhombohedral Ca_1.5V₂(PO₄)₃/C. Cyclic voltammetry reveals five reduction and oxidation peaks on Li₃V₂(PO₄)₃/C and Li₂Ca_0.5V₂(PO₄)₃/C electrodes. In contrast, LiCaV₂(PO₄)₃/C and Ca_1.5V₂(PO₄)₃/C have no obvious oxidation and reduction peaks but a box‐type voltammogram. This feature is the signature for capacitive‐like mechanism, which involves fast electron transfer on the surface of the electrode. Li₃V₂(PO₄)₃/C undergoes two solid‐solution and a short two‐phase reaction during lithiation and delithiation processes, whereas Ca_1.5V₂(PO₄)₃/C only goes through capacitive‐like mechanism. In operando X‐ray absorption spectroscopy confirms that, in both Li₃V₂(PO₄)₃/C and Ca_1.5V₂(PO₄)₃/C, V ions are reduced during the insertion of the first three Li ions. This study demonstrates that the electrochemical characteristic of polyanionic phosphates can be easily tuned by replacing Li⁺ with larger divalent cations.     

Additional Sodium Insertion into Polyanionic Cathodes for Higher‐Energy Na‐Ion Batteries

Na‐ion technology is increasingly studied as a low‐cost solution for grid storage applications. Many positive electrode materials have been reported, mainly among layered oxides and polyanionic compounds. The vanadium oxy/flurophosphate solid solution Na₃V₂(PO₄)₂F_3‐y O_2y (0 ≤ y ≤ 1), in particular, has proven the ability to deliver ≈500 Wh kg^‐1, operating on the V³⁺/V⁴⁺ (y = 0) or V⁴⁺/V⁵⁺ redox couples (y = 1). This paper reports here on a significant increase in specific energy by enabling sodium insertion into Na₃V₂(PO₄)₂FO₂ to reach Na₄V₂(PO₄)₂FO₂ upon discharge. This occurs at ≈1.6 V and increases the theoretical specific energy to 600 Wh kg^?1, rivaling that of several Li‐ion battery cathodes. This improvement is achieved by the judicious modification of the composition either as O for F substitution, or Al for V substitution, both of which disrupt Na‐ion ordering and thereby enable insertion of the 4th Na. This paper furthermore shows from operando X‐Ray Diffraction (XRD) that this energy is obtained in the cycling range Na₄V₂(PO₄)₂FO₂–NaV₂(PO₄)₂FO₂ with a very small overall volume change of 1.7%, which is one of the smallest volume changes for Na‐ion cathodes and which is a crucial requisite for stable long‐term cycling.     

Cytotoxic Effect of Photoluminescent RE3+ Doped Ca3(PO4)2 Nanorods on Breast Cancer Cell Lines

BackgroundBreast cancer reported in the young women exhibits high local and distant recurrence and a poor prognosis. Rare earth doped calcium phosphate phosphors have been extensively investigated due to their unique applications in biomedicine.MethodsIn the current study, Tb³⁺, Ce³⁺ doped Ca₃(PO₄)₂ phosphor were prepared by hydrothermal method at 150 °C using citric acid as additive and characterized by PXRD, FT-IR, TG-DTA, EDX, TEM and PL techniques. The photoluminescence properties of Tb³⁺, Ce³⁺ doped Ca₃(PO₄)₂ phosphor was investigated upon photo excitation at 240 nm. Antiproliferative activity was evaluated by MTT, BrdU proliferation, ELISA, Methylene blue and caspase-3 assays.ResultsCa₃(PO₄)₂:Tb³⁺, Ce³⁺ phosphor exhibited needle like morphology with length and width ∼100-500 nm and ∼40-50 nm, respectively. It exhibited green emission at 550 nm corresponding to ⁵D₄→⁷F₅ transition with the CIE coordinates (x, y) as (0.284, 0.614). It also showed remarkable concentration dependent cytotoxicity against MCF-7 as well as MDA-MB 231 cells with negligible cytotoxicity compared to MCF-12A, a human epithelial healthy cell line. It reduced the proliferative index of both cell lines in a concentration dependent manner by inhibiting DNA synthesis and Ki67 protein. It also induced distinct apoptotic changes in the morphology of cell and nucleus and also activated the caspase-3 activity in breast cancer cell lines.ConclusionThe results suggest that Ca₃(PO₄)₂:Tb³⁺, Ce³⁺ phosphor may be useful for therapeutic application in clinical settings.     

Visualisation of metal deposition in biofilm reactors by three-dimensional magnetic resonance imaging (MRI)

Three-dimensional magnetic resonance imaging (MRI) was used to visualise polyurethane foam-immobilised Citrobacter after challenging with La³⁺ and/or Cu²⁺ in citrate buffer supplemented with glycerol 2-phosphate. Extensive phosphatase-mediated bioaccumulation of LaPO₄ was observed but no evidence for deposition of Cu₃(PO₄)₂ was obtained by X-ray diffraction and proton-induced X-ray emission analyses. Image analysis showed that La³⁺/Cu²⁺ is a good model system to study the function of this biofilm reactor non-invasively by MRI.     

Optical analysis of Sr3Gd(PO4)3:Pr3+ phosphors for lighting applications

A series of praseodymium (Pr³⁺) ion activated Sr₃Gd_(1−x)(PO₄)₃:xPr³⁺ (0 ≤ x ≤ 2.0 mol%) phosphors were prepared and their structural, compositional and luminescence properties were investigated. The X-ray diffraction profiles indicate that the studied phosphors crystallized into body centred cubic structure and the Pr³⁺ ions have no influence on Sr₃Gd(PO₄)₃ phase. The high-resolution scanning electron microscopy images show the agglomeration of particles that are inter-connected and form irregular shape Sr₃Gd(PO₄)₃ structures. The excitation transitions corresponding to Pr³⁺:³H₄ → ³P_2,1,0 transitions at 445, 471 and 483 nm, respectively, matched well with the emission of blue-light-emitting diode (LED) chip. The emission spectra show strong reddish-orange luminescence through ¹D₂ → ³H₄ transition when excited at 445 nm blue wavelength. The synthesized phosphors have the potential to be used as reddish-orange lighting devices.     

Reactions of thioether carboxylic acids with mercury(II). Formation and X-ray crystal structure of mercury(II) mercaptoacetate

Reactions of Hg(II) salts with thioether carboxylic acids o-C₆H₄[CH(SCH₂COOH)₂]₂ (1a) and PhCH(SCH₂COOH)₂ (3) in water were found to lead to the decomposition of these ligands with the formation of mercury(II) mercaptoacetate Hg(SCH₂COOH)₂ (2) and aldehydes o-C₆H₄(CHO)₂ and PhCHO, respectively. A similar reaction was observed between Hg(NO₃)₂ and CH₃(CH₂)₂CH(SCH₂COOH)₂ (4). The X-ray structure of Hg(SCH₂COOH)₂ (2) shows a linear -S-Hg-S- moiety. The mechanism of the formation of 2 in the reactions between Hg²⁺ and thioether carboxylic acids in water is discussed.     

High Capacity and High‐Rate NASICON‐Na3.75V1.25Mn0.75(PO4)3 Cathode for Na‐Ion Batteries via Modulating Electronic and Crystal Structures

Sodium superionic conductor (NASICON) cathodes are attractive for Na‐ion battery applications as they exhibit both high structural stability and high sodium ion mobility. Herein, a comprehensive study is presented on the structural and electrochemical properties of the NASICON‐Na_3+yV_2?yMn_y(PO₄)₃ (0 ≤ y ≤ 1) series. A phase miscibility gap is observed at y = 0.5, defining two solid solution domains with low and high Mn contents. Although, members of each of these domains Na_3.25V_1.75Mn_0.25(PO₄)₃ and Na_3.75V_1.25Mn_0.75(PO₄)₃ reversibly exchange sodium ions with high structural integrity, the activity of the Mn³⁺/Mn²⁺ redox couple is found to be absent and present in the former and latter candidate, respectively. Galvanostatic cycling and rate studies reveal higher capacity and rate capability for the Na_3.75V_1.25Mn_0.75(PO₄)₃ cathode (100 and 89 mA h g^?1 at 1C and 5C rate, respectively) in the Na_3+yV_2?yMn_y(PO₄)₃ series. Such a remarkable performance is attributed to optimum bottleneck size (≈5 Ų) and modulated V‐ and Mn‐redox centers as deduced from Rietveld analysis and DFT calculations, respectively. This study shows how important it is to manipulate electronic and crystal structures to achieve high‐performance NASICON cathodes.