A mediator-free glucose biosensor based on glucose oxidase/chitosan/α-zirconium phosphate ternary biocomposite

A novel glucose oxidase/chitosan/α-zirconium phosphate (GOD/chitosan/α-ZrP) ternary biocomposite was prepared by co-intercalating glucose oxidase (GOD) and chitosan into the interlayers of α-zirconium phosphate (α-ZrP) via a delamination–reassembly procedure. The results of X-ray diffraction, infrared spectroscopy, circular dichroism, and ultraviolet spectrum characterizations indicated not only the layered and hybrid structure of the GOD/chitosan/α-ZrP ternary biocomposite but also the recovered activity of the intercalated GOD improved by the co-intercalated chitosan. By depositing the GOD/chitosan/α-ZrP biocomposite film onto a glassy carbon electrode, the direct electrochemistry of the intercalated GOD was achieved with a fast electron transfer rate constant, k_s, of 7.48 ± 3.52 s⁻¹. Moreover, this GOD/chitosan/α-ZrP biocomposite modified electrode exhibited a sensitive response to glucose in the linear range of 0.25–8.0 mM (R = 0.9994, n = 14), with a determination limit of 0.076 mM.     

Involvement of nitric oxide (NO) signalling pathway in the antidepressant activity of essential oil of Valeriana wallichii Patchouli alcohol chemotype

Valeriana wallichii DC (Valerianaceae), popularly named as Indian valerian has been shown to exist as three chemotypes. The present study evaluated the antidepressant like effect of root essential oil of Valeriana wallichii patchouli alcohol chemotype in both acute and chronic treatment study using forced swim test (FST). Mice (n = 6 per group) received 10, 20 and 40 mg/kg p.o. doses of test drug. Single administration of oil significantly inhibited the immobility period (57.6% and 46.9%) at doses 20 and 40 mg/kg respectively without changing the motor function (p < 0.05). Similarly, daily administration of essential oil (20 mg/kg) for 14 days significantly reduced the immobility period (69.9%) in FST (p < 0.05). The neurotransmitter levels in mouse brain were estimated on day 14 after the behavioral study. Significant increase in the level of norepinephrine (29%) and serotonin (19%) (p < 0.05) was found at 20 mg/kg dose, while no change was observed at 10 and 40 mg/kg doses. The antidepressant-like effect of essential oil (20 mg/kg) was prevented by pretreatment of mice with l-arginine (750 mg/kg i.p.) and sildenafil (5 mg/kg i.p). On the contrary, pretreatment of mice with l-NAME (10 mg/kg i.p.) or methylene blue (10 mg/kg i.p.) potentiated the antidepressant action of essential oil (10 mg/kg). Taken together, these findings demonstrated that nitric oxide pathway is involved in mediating antidepressant like effect of essential oil from this chemotype.     

Biocomposite films prepared from ionic liquid solutions of chitosan and cellulose

Blends of chitosan and cellulose were successfully produced using 1-butyl-3-methylimidazolium acetate (BMIMAc) as solvent media. Films were prepared from the blends by manually spreading the solution on a flat surface and precipitating the polymers in a mixture of methanol and water. To prevent the shrinkage of films, most of the absorbed water was removed by freeze drying under vacuum. Films prepared from the polymeric solutions were investigated by means of FT-IR, TGA, X-ray diffraction and SEM measurements. The shifting of the bands corresponding to -NH and CO groups of chitosan (FT-IR), the absence of the diffraction peaks at 2θ = 10.7 and 14.9° (XRD), the increased E_a for thermal decomposition for all the polymeric blends (MTGA), and the presence of an apparent homogeneous structure with no phase separation of the two polymers (SEM) provide evidence for the miscibility between chitosan and cellulose in the solid state.     

Chitosan derivatives alter release profiles of model compounds from calcium phosphate implants

The aim of the current study was to evaluate the impact of chitosan derivatives, namely N-octyl-chitosan and N-octyl-O-sulfate chitosan, incorporated in calcium phosphate implants to the release profiles of model drugs. The rate and extent of calcein (on M.W. 650 Da) ED, and FITC-dextran (M.W. 40 kDa) on in vitro release were monitored by fluorescence spectroscopy. Results show that calcein release is affected by the type of chitosan derivative used. A higher percentage of model drug was released when the hydrophilic polymer N-octyl-sulfated chitosan was present in the tablets compared with the tablets containing the hydrophobic polymer N-octyl-chitosan. The release profiles of calcein or FD from tablets containing N-octyl-O-sulfate revealed a complete release for FD after 120 h compared with calcein where 20% of the drug was released over the same time period. These results suggest that the difference in the release profiles observed from the implants is dependent on the molecular weight of the model drugs. These data indicate the potential of chitosan derivatives in controlling the release profile of active compounds from calcium phosphate implants.     

Chemical composition and larvicidal activity of essential oils from Piper species

The larvicidal activity of essential oils of four species of Piper from the Amazon Forest was tested using third-instar larvae of Aedes aegypti. The oils were extracted by steam distillation and analyzed by GC and GC–MS. The main components isolated from each Piper species were as follows: viridiflorol (27.50%), aromadendrene (15.55%) and β-selinene (10.50%) from Piper gaudichaudianum; β-selinene (15.77%) and caryophyllene oxide (16.63%) from Piper humaytanum; dillapiol (54.70%) and myristicin (25.61%) from Piper permucronatum; and asaricin (27.37%) and myristicin (20.26%) from Piper hostmanianum. Amongst all essential oils tested, the most active against larvae of A. aegypti was the oil extracted from P. permucronatum, with a LC₅₀ = 36 μg/ml (LC₉₀ = 47 μg/ml), followed by the essential oil of P. hostmanianum, with a LC₅₀ = 54 μg/ml (LC₉₀ = 72 μg/ml). The oils with higher content of arylpropanoids were more active against larvae of A. aegypti.     

Effect of chitosan on UASB treating POME during a transition from mesophilic to thermophilic conditions

The effects of chitosan addition on treatment of palm oil mill effluent were investigated using two lab-scale upflow anaerobic sludge bed (UASB) reactors: (1) with chitosan addition at the dosage of 2 mg chitosan per g volatile suspended solids on the first day of the operation (R1), (2) without chitosan addition (the control, R2). The reactors were inoculated with mesophilic anaerobic sludge which was acclimatized to a thermophilic condition with a stepwise temperature increase of 5 °C from 37 to 57 °C. The OLR ranged from 2.23 to 9.47 kg COD m⁻³ day⁻¹. The difference in biogas production rate increased from non-significant to 18% different. The effluent volatile suspended solids of R1 was 65 mg l⁻¹ lower than that of R2 on Day 123. 16S rRNA targeted denaturing gradient gel electrophoresis (DGGE) fingerprints of microbial community indicated that some methanogens in the genus Methanosaeta can be detected in R1 but not in R2.     

Inhibitory effect of essential oils of Allium sativum and Piper longum on spontaneous muscular activity of liver fluke, Fasciola gigantica

Effects of essential oil of Allium sativum (garlic) and Piper longum (Indian long pepper) were evaluated on muscular activity of whole Fasciola gigantica and its strip preparation. The whole flukes and longitudinal strip preparations of the flukes were isometrically mounted to record the spontaneous muscular activity (SMA) and to evaluate effects of cumulative doses (0.1, 0.3, 1.0 and 3.0 mg/ml) of the plant essential oils. Whole flukes and the strip preparations exhibited continuous SMA without any significant difference in its baseline tension, frequency and amplitude for 2 h. Essential oil of A. sativum produced significant reduction in the frequency and the amplitude of the SMA of whole fluke at 1 and 3 mg/ml concentrations. It caused complete paralysis of the fluke after 15 min of administration of 3 mg/ml concentration. Similar to whole fluke, essential oil of A. sativum (3 mg/ml) also produced flaccid paralysis in the strip preparations of the flukes. Essential oil of P. longum firstly induced marked excitatory effect and then there was flaccid paralysis of the whole fluke following 15 min exposure at 3 mg/ml concentration. Complete flaccid paralysis of the strip preparation was also ensued after 15 min of administration of 3 mg/ml concentration of P. longum. In both the essential oils, the whole fluke and strip preparations did not recover from paralysis following 2-3 washes. In conclusion, the observations demonstrated irreversible paralytic effect of essential oils of A. sativum and P. longum on F. giganticain vitro which might possibly help to developing herbal-based anthelmintic.     

Cardiodepressive effect elicited by the essential oil of Alpinia speciosa is related to L-type Ca current blockade

This study was undertaken to elucidate the effect of the essential oil from Alpinia speciosa (EOAs) on cardiac contractility and the underlying mechanisms. The essential oil was obtained from Alpinia speciosa leaves and flowers and the oil was analyzed by GC-MS method. Chemical analysis revealed the presence of at least 18 components. Terpinen-4-ol and 1,8-cineole corresponded to 38% and 18% of the crude oil, respectively. The experiments were conducted on spontaneously-beating right atria and on electrically stimulated left atria isolated from adult rats. The effect of EOAs on the isometric contractions and cardiac frequency in vitro was examined. EOAs decreased rat left atrial force of contraction with an EC₅₀ of 292.2 ± 75.7 μg/ml. Nifedipine, a well known L-type Ca²⁺ blocker, inhibited in a concentration-dependent manner left atrial force of contraction with an EC₅₀ of 12.1 ± 3.5 μg/ml. Sinus rhythm was diminished by EOAs with an EC₅₀ of 595.4 ± 56.2 μg/ml. Whole-cell L-type Ca²⁺ currents were recorded by using the patch-clamp technique. EOAs at 25 μg/ml decreased I_Ca,L by 32.6 ± 9.2% and at 250 μg/ml it decreased by 89.3 ± 7.4%. Thus, inhibition of L-type Ca²⁺ channels is involved in the cardiodepressive effect elicited by the essential oil of Alpinia speciosa in rat heart.     

Sensitive voltammetric determination of thymol in essential oil of Carum copticum seeds using boron-doped diamond electrode

Essential oil of Carum copticum seeds, obtained from a local shop, was extracted and content of thymol was analyzed using square-wave voltammetry at boron-doped diamond electrode. The effect of various parameters, such as pH of supporting electrolyte and square-wave voltammetric parameters (modulation amplitude and frequency), was examined. In Britton–Robinson buffer solution (pH 4), thymol provided a single and oval-shaped irreversible oxidation peak at +1.13 V versus silver/silver chloride potassium electrode (3 M). Under optimal experimental conditions, a plot of peak height against concentration of thymol was found to be linear over the range of 4 to 100 μM consisting of two linear ranges: from 4 to 20 μM (R² = 0.9964) and from 20 to 100 μM (R² = 0.9993). The effect of potential interferences such as p-cymene and γ-terpinene (major components in essential oil of C. copticum seeds) was evaluated. Thus, the proposed method displays a sufficient selectivity toward thymol with a detection limit of 3.9 μM, and it was successfully applied for the determination of thymol in essential oil of C. copticum seeds. The Prussian blue method was used for validation of the proposed electroanalytical method.     

Application of vibrational spectroscopy in the quality assessment of Buchu oil obtained from two commercially important Agathosma species (Rutaceae)

Quality assessment of natural raw materials and derived consumer products is often done using conventional analytical techniques such as liquid and gas chromatography which are expensive and time consuming. This paper reports on the use of vibrational spectroscopy techniques as possible alternatives for the rapid and inexpensive assessment of the quality of ‘buchu oil’ obtained from two South African species; Agathosma betulina and Agathosma crenulata belonging to the Rutaceae family. Samples of A. betulina (55) and A. crenulata (16) were collected from different natural localities and cultivation sites in South Africa. The essential oil was obtained by hydrodistillation and scanned on Near infrared (NIR), mid infrared (MIR) and Raman spectrometers. The spectral data obtained was processed using chemometric techniques and orthogonal partial least squares discriminant analysis (OPLS-DA) was used to clearly differentiate between A. betulina and A. crenulata. The OPLS-DA technique also proved to be a useful tool to identify wave regions that contain biomarkers (peaks) that contributed to the separation of the two species. The three spectroscopy techniques were also evaluated for their ability to accurately predict the percentage composition of seven major compounds that occur in A. betulina ‘buchu’ oil. Using GC–MS reference data, calibration models were developed for the MIR, NIR and Raman spectral data to predict/profile the major compounds in ‘buchu oil’. A comparison of the three spectroscopy techniques showed that MIR together with PLS algorithms produced the best model (R²X = 0.96; R²Y = 0.88 and Q²Ycum = 0.85) for the quantification of six of the seven major oil constituents. The MIR model showed high predictive power for pseudo-diosphenol (R² = 0.97), isomenthone (R² = 0.97), menthone (R² = 0.90), limonene (R² = 0.91), pulegone (R² = 0.96) and diosphenol (R² = 0.85). These results illustrate the potential of MIR spectroscopy as a rapid and inexpensive alternative to predict the major compounds in buchu oil.     

Functionalization of chitosan by laccase-catalyzed oxidation of ferulic acid and ethyl ferulate under heterogeneous reaction conditions

Chitosan particles were functionalized with ferulic acid (FA) and ethyl ferulate (EF) as substrates using laccase from Myceliophtora thermophyla as biocatalyst. The reactions were performed with chitosan particles under an eco-friendly procedure, in a heterogeneous system at 30 °C, in phosphate buffer (50 mM, pH 7.5).The FA-chitosan derivative presented an intense yellow-orange color stable while the EF-chitosan derivative was colorless. The spectroscopic analyses indicated that the reaction products bound covalently to the free amino groups of chitosan exhibiting a novel absorbance band in the UV/Vis spectra between 300 and 350 nm, at C-2 region by the duplication of C-2 signal in the ¹³C NMR spectrum, via Schiff base bond (NC) exhibiting novel bands in the FT-IR spectrum at 1640 and 1620 cm⁻¹. Additionally, antioxidant capacities of chitosan derivatives showed that the chitosan derivatives presented improved antioxidant properties, especially for FA-chitosan derivative (EC₅₀ were 0.52 ± 0.04, 0.20 ± 0.02 mg/ml for DPPH and ABTS⁺ scavenging, respectively).     

Effects of heat treatment on hydrogen production potential and microbial community of thermophilic compost enrichment cultures

Cellulosic plant and waste materials are potential resources for fermentative hydrogen production. In this study, hydrogen producing, cellulolytic cultures were enriched from compost material at 52, 60 and 70 °C. Highest cellulose degradation and highest H₂ yield were 57% and 1.4 mol-H₂ mol-hexose⁻¹ (2.4 mol-H₂ mol-hexose-degraded⁻¹), respectively, obtained at 52 °C with the heat-treated (80 °C for 20 min) enrichment culture. Heat-treatments as well as the sequential enrichments decreased the diversity of microbial communities. The enrichments contained mainly bacteria from families Thermoanaerobacteriaceae and Clostridiaceae, from which a bacterium closely related to Thermoanaerobium thermosaccharolyticum was mainly responsible for hydrogen production and bacteria closely related to Clostridium cellulosi and Clostridium stercorarium were responsible for cellulose degradation.     

Depolymerised carrageenan enhances physiological activities and menthol production in Mentha arvensis L.

Irradiated carrageenan (IC) could elicit plant growth promoting activities in plants. The effect of foliar spray of five concentrations of IC (20, 40, 60_, 80 and 100 mg L⁻¹) was studied on Mentha arvensis L. in terms of plant growth, physiological attributes, herbage yield and the content and yield of essential oil and its components. Un-irradiated carrageenan and deionized water had no effect on the attributes studied. GPC study revealed formation of low molecular weight fractions in irradiated samples containing less than 20,000 molecular weight oligomers which are responsible for plant growth promotion in this study. 80 mg L⁻¹ of IC was the most effective concentration which resulted in the highest values of growth attributes, herbage yield and the content and yield of essential oil and menthol content of the oil. It also improved the leaf-nutrient contents, photosynthetic rate and other physiological parameters. 100 mg L⁻¹ of IC did not further improve the attributes studied, but it was always better than the control.     

Mucoadhesive chitosan/gelatin films for buccal delivery of propranolol hydrochloride

The aim of this work was to develop and characterize chitosan/gelatin films as innovative mucoadhesive system for buccal delivery of propranolol hydrochloride. FT-IR and TGA analysis confirmed the interaction between chitosan and gelatin. The presence of higher chitosan amounts in chitosan/gelatin films allowed the lowest percent water-uptake ability (235.1 ± 5.3%) and the highest in vivo residence time in the buccal cavity (240 ± 13 min). Moreover, the presence of mannitol in the formulation allowed 80% drug permeation through porcine buccal mucosa in 5 h. This behaviour suggests that the application of four and two films containing 5 mg of propranolol hydrochloride could be suitable for achieving the proposed daily dose for hypertension and atrial fibrillation treatment, respectively. Another interesting aspect of chitosan/gelatin films was their compatibility with buccal microflora in the absence of drug and their ability to determine growth inhibition for pathogen bacteria, but not for probiotic species, when loaded with drug.     

Antifungal activities of essential oils applied by dip-treatment on areca palm (Areca catechu) leaf sheath and persistence of their potency upon storage

The antifungal activities of cinnamon oil, clove oil, anise oil, and peppermint oil, and their main components (cinnamaldehyde, eugenol, trans-anethole, and menthol, respectively) against molds identified from areca palm leaf sheath (Mucor dimorphosporus, Penicillium sp., Aspergillus niger, and Rhizopus sp.) were investigated. An agar dilution method was employed to determine the minimum inhibitory concentration (MIC) of essential oils and their main components. Zone inhibition tests and the inhibitory effect of the leaf sheath dip-treated with essential oils against those molds were examined. Major components of essential oils on the leaf sheath during storage were quantified by gas chromatography analysis. The MIC values of essential oils on agar and on the leaf sheath were identical. With an MIC of 50 ??g ml⁻¹, cinnamon oil had the strongest inhibitory effect. At their MICs the oils were capable of providing protection against mold growth on the leaf sheath for at least 12 weeks during storage at 25 °C and 100% RH. Scanning electron microscope examination showed that essential oils prevented spore germination. Except for menthol in peppermint oil, the main components of the essential oils, which were fairly stable over the storage period, largely contributed to the antifungal activity.     

Characterization and antimicrobial activity of water-soluble N-(4-carboxybutyroyl) chitosans against some plant pathogenic bacteria and fungi

Water-soluble N-(4-carboxybutyroyl) chitosan derivatives with different degrees of substitution (DS) were synthesized to enhance the antimicrobial activity of chitosan molecule against plant pathogens. Chitosan in a solution of 2% aqueous acetic acid-methanol (1:1, v/v) was reacted with 0.1, 0.3, 0.6 and 1 mol of glutaric anhydride to give N-(4-carboxybutyroyl) chitosans at DS of 0.10, 0.25, 0.48 and 0.53, respectively. The chemical structures and DS were characterized by ¹H and ¹³C NMR spectroscopy, which showed that the acylate reaction took place at the N-position of chitosan. The synthesized derivatives were more soluble than the native chitosan in water and in dilute aqueous acetic acid and sodium hydroxide solutions. The antimicrobial activity was in vitro investigated against the most economic plant pathogenic bacteria of Agrobacterium tumefaciens and Erwinia carotovora and fungi of Botrytis cinerea, Pythium debaryanum and Rhizoctonia solani. The antimicrobial activity of N-(4-carboxybutyroyl) chitosans was strengthened than the un-modified chitosan with the increase of the DS. A compound of DS 0.53 was the most active one with minimum inhibitory concentration (MIC) of 725 and 800 mg/L against E. carotovora and A. tumefaciens, respectively and also in mycelial growth inhibiation against B. cinerea (EC₅₀ = 899 mg/L), P. debaryanum (EC₅₀ = 467 mg/L) and R. solani (EC₅₀ = 1413 mg/L).     

Biocompatible elastomer of waterborne polyurethane based on castor oil and polyethylene glycol with cellulose nanocrystals

Biocompatible waterborne polyurethane (WPU) based on castor oil (CO)/polyethylene glycol (PEG) filled with low level loadings of Eucalyptus globulus cellulose nanocrystals (ECNs) was prepared. The ECNs obtained by sulfuric hydrolysis, consisted of ‘rod-like’ crystals with an average length and diameter of 518.0 ± 183.4 nm and 21.7 ± 13.0 nm, respectively. The nanocomposites with low level loadings of ECNs showed significant enhancement in tensile strength and Young's modulus from 5.43 to 12.22 MPa and from 1.16 to 4.83 MPa, respectively. SEM results showed well dispersion of ECNs in the WPU matrix. Furthermore, it was verified that the nanosized ECNs favored the hard-segments (HSs)/soft-segments (SSs) microphase separation of the WPU, causing shifts of the SS glass transition temperature (T_g,s) and the HS melting temperature (T_m,h) toward higher temperatures.     

Novel regenerated cellulose films prepared by coagulating with water: Structure and properties

Regenerated films were successfully prepared from cellulose/NaOH/urea solution by coagulating with water at temperature from 25 to 45 °C. The results of solid ¹³C NMR, wide angle X-ray diffraction, scanning electron microscopy (SEM) and tensile testing revealed that the cellulose films possessed homogeneous structure and cellulose II crystalline, similar to that prepared previously by coagulating with 5 wt% H₂SO₄. By changing the coagulation temperature from 25 to 45 °C, tensile strength of the films was in the range of 85-139 MPa. Interestingly, the RC35 film coagulated at 35 °C exhibited the highest tensile strength (σ_b = 139 MPa). The inclusion complex associated with cellulose, NaOH and urea hydrates in the cellulose solution were broken by adding water (non-solvent), leading to the self-association of cellulose to regenerate through rearrangement of the hydrogen bonds. This work provided low-cost and “green” pathway to prepare cellulose films, which is important in industry.     

Synthesis and antimicrobial activity of the Schiff base from chitosan and citral

Chitosan, a biocompatible, biodegradable, non-toxic polymer, is prepared from chitin, which is the second most naturally occurring biopolymer after cellulose. The Schiff base of chitosan was synthesized by the reaction of chitosan with citral working under high-intensity ultrasound. The effect of the molar ratio of chitosan to citral, reaction time, and temperature on the yield has been investigated. The optimal conditions were a temperature of 50 °C, a molar ratio of chitosan to citral of 1:6, and a reaction time of 10 h. The maximum yield achieved was 86.4% under optimum conditions. The structure of the Schiff base was characterized by FTIR spectroscopy, elemental analysis, and X-ray diffraction studies. The strong peaks at 1648.3 and 1610.6 cm⁻¹ are due to CN and CC stretching vibrations. The results confirmed that amino groups on chitosan reacted with citral to form the Schiff base. The antimicrobial activities of chitosan and Schiff base of chitosan were investigated against Escherichia coil, Staphylococcus aureus, and Aspergillus niger. The results indicate that the antimicrobial activity of the Schiff base increases with an increase in the concentration. It was also found that the antimicrobial activity of the Schiff base was stronger than that of chitosan.     

Chemical composition,intraspecies variation and seasonal variation in essential oils of Calendula arvensis L.

The essential oil composition of Calendula arvensis was established for the first time using GC and GC/MS. Eighty-five essential oil components were identified, which accounted for 90.3 g/100 g of essential oil. The oil contained a high concentration of sesquiterpenes, of which δ-cadinene and α-cadinol were the main components. The chemical composition of 25 Corsican C. arvensis oils was analyzed to determine intraspecies variation in essential oil composition. A matrix linking essential oil composition to sample location was composed to identify relationships between concentrations of volatile samples and the geographical origins of samples. Two main groups of compounds were identified according to the amount of sesquiterpenic compounds (hydrocarbons and alcohols) and soil characteristics. Seasonal variation (winter vs. spring) in the concentrations of two major compounds during the flowering period was observed.