Genes and regulatory sequences of bacteriophage phi X174

Fragments of the DNA of bacteriophage phi X174 were inserted in the plasmids pACYC177 and pBR322, in order to test the in vivo effects of separate phage genes and regulatory sequences. The phi X174 inserts were identified by recombination and complementation with phage mutants, followed by restriction enzyme analysis. The genes B, C, F and G can be maintained stably in the cell even when there is efficient expression of these viral genes. Recombinant plasmids with the complete genes D and E can only be maintained when the expression of these genes is completely blocked. Expression of complete H and J genes could not yet be demonstrated. The intact gene A was apparently lethal for the host cell, as it was never found in the recombinants. The genes F and G are expressed, even when they are not preceded by one of the well characterized viral or plasmid promoter sequences. Screening of the nucleotide sequence of phi X174 gives two promoter-like sequences just in front of the two genes. Viral sequences with replication signals (the phi X174 (+) origin of replication, the initiation site for complementary strand synthesis and the incompatibility sequence) appeared to be functional also when inserted in recombinant plasmids. A plasmid with the phi X (+) origin can be forced to a rolling circle mode of replication. The A protein produced by infecting phages works in trans on the cloned viral origin. The (-) origin can function as initiation signal for complementary strand synthesis during transduction of single-stranded plasmid DNA. The intracellular presence of the incompatibility sequence on a plasmid prevents propagation of infecting phages.     

Regions of incompatibility in single-stranded DNA bacteriophages phi X174 and G4.

The intracellular presence of a recombinant plasmid containing the intercistronic region between the genes H and A of bacteriophage phi X174 strongly inhibits the conversion of infecting single-stranded phi X DNA to parental replicative-form DNA. Also, transfection with single-stranded or double-stranded phi X174 DNA of spheroplasts from a strain containing such a "reduction" plasmid shows a strong decrease in phage yield. This phenomenon, the phi X reduction effect, was studied in more detail by using the phi X174 packaging system, by which plasmid DNA strands that contain the phi X(+) origin of replication were packaged as single-stranded DNA into phi X phage coats. These "plasmid particles" can transduce phi X-sensitive host cells to the antibiotic resistance coded for by the vector part of the plasmid. The phi X reduction sequence in the resident plasmid strongly affected the efficiency of the transduction process, but only when the transducing plasmid depended on primosome-mediated initiation of DNA synthesis for its conversion to double-stranded DNA. The combination of these results led to a model for the reduction effect in which the phi X reduction sequence interacted with an intracellular component that was present in limiting amounts and that specified the site at which phi X174 replicative-form DNA replication takes place. The phi X reduction sequence functioned as a viral incompatibility element in a way similar to the membrane attachment site model for plasmid incompatibility. In the DNA of bacteriophage G4, a sequence with a similar biological effect on infecting phages was identified. This reduction sequence not only inhibited phage G4 propagation, but also phi X174 infection.     

Initiation and termination of the bacteriophage phi X174 rolling circle DNA replication in vivo: packaging of plasmid single-stranded DNA into bacteriophage phi X174 coats.

The bacteriophage phi X174 viral (+) origin when inserted in a plasmid can interact in vivo with the A protein produced by infecting phi X174 phages. A consequence of this interaction is packaging of single-stranded plasmid DNA into preformed phage coats resulting in infective particles (1). This property was used to study morphogenesis and to analyse the signals for initiation and termination of the rolling circle DNA replication in vivo. It is shown that the size of the DNA had a strong effect on the encapsidation by the phage coats and the infectivity of the particle. Termination was analysed by using plasmids with two phi X (+) origins either in the same orientation or in opposite orientation. Both origins were used with equal frequency. Initiation at one origin resulted in very efficient termination (greater than 96%) at the second origin in the case of two origins in the same orientation. When the two (+) origins have opposite orientations, no correct termination was observed. The second origin in the opposite strand effectively inhibits (greater than 98%) the normal DNA synthesis; i.e. the covalently bound A protein present in the replication fork interacts with the (+) origin sequence in the opposite strand.     

DNA sequences which support activities of the bacteriophage phi X174 gene A protein

The DNA sequence of 30 nucleotides which surrounds the origin of viral strand DNA replication is highly conserved amongst the icosahedral single-stranded DNA bacteriophages. The A gene of these phages encodes a protein which is required for initiation and termination of viral strand DNA synthesis and acts as a nicking-closing activity specifically within this 30-nucleotide sequence. A system of purified Escherichia coli host proteins and phi X174 gene A protein has been developed which specifically replicates in vitro the viral strand of phi X174 from RF (replicative form) I template DNA and yields single-stranded circular DNA products (RF leads to SS(c) DNA replication system). Recombinant plasmids carrying inserts derived from phage phi X174 or G4 DNA which range in length from 49 to 1175 base pairs and contain the 30-nucleotide conserved sequence have been shown to support phi X A protein-dependent DNA synthesis in vitro in this replication system. We report here that insertion of the 30-nucleotide sequence alone into pBR322 allows the resulting recombinant plasmids to support phi X A protein-dependent in vitro DNA synthesis as efficiently as phi X174 template DNA in the RF leads to SS(c) replication system. The 30-nucleotide sequence functions as a fully wild type DNA replication origin as determined by the rate of DNA synthesis and the structure of resulting DNA products. Furthermore, the DNA sequence requirements for nicking of RF I DNA by the phi X A protein and for supporting replication origin function have been partially separated. Homology to positions 1, 29, and 30 of the 30-nucleotide conserved sequence are not required for cleavage of RF I DNA by the A protein; homology to position 1 but not 29 or 30 is required for efficient DNA replication.     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

Mutational analysis of the bacteriophage phi X174 replication origin

Bacteriophage phi X174 mutants within the 30 base-pair replication origin were constructed using oligodeoxynucleotide-directed mutagenesis. A total of 18 viable base substitution mutants at 13 different positions within the origin region were obtained. The majority of these ori mutants have a plaque morphology and burst size comparable to that of wild-type phi X174. Two phi X174 ori mutants with a reduced growth ability spontaneously acquired additional mutations that enhanced the growth rate. The additional mutation was located at the same site as the original mutation or was located in the N-terminal part of the gene A protein. This latter secondary mutation is responsible for a better binding and/or recognition of the gene A protein to the mutated origin. In a Darwinian experiment wild-type phi X174 outgrows all phi X174 ori mutants, indicating the superiority of the wild-type ori sequence for the reproduction of bacteriophage phi 174. Insertions and deletions were constructed at different positions within the phi X174 replication origin cloned in a plasmid. Small insertions and deletions in the A + T-rich spacer region do not inhibit phi X174 gene A protein cleavage in vitro, but severely impair packaging of single-stranded plasmid DNA in viral coats.     

Construction and characterization of recombinant plasmid DNAs containing sequences of the origin of bacteriophage phi X174 DNA replication

The synthetic DNA fragment (formula, see text) (corresponding to nucleotides 4299-4314 of the phi X DNA sequence) was cloned into either the AmpR gene or the KmR gene of plasmid pACYC 177. The DNA sequence of the KmR gene around the insertion site was determined by nucleotide sequence analysis of the pACYC 177 FnudII restriction DNA fragment N6 (345 b.p.). Of five selected plasmid DNAs, which contained inserted DNA sequences in the antibiotic resistance genes, the nucleotide sequences at and around these insertions were determined. Two recombinant plasmids (pFH 704 and pFH 614) contain the hexadecamer sequence in tandem (tail-to-tail and tail-to-head). In the recombinant plasmids pFH 812, pFH 903 and pFH 807 the DNA sequence homology with the phi X origin region was 14 (No. 4300-4313), 16 (No. 4299-4314) and 20 nucleotides (No. 4299-4318), respectively. None of the supercoiled recombinant plasmid DNAs is nicked upon incubation with phi X gene A protein. Moreover, the recombinant plasmid RFI DNAs cannot act as substitutes for phi X RFI DNA in the in vitro (+) strand synthesizing system. It has been shown earlier that single-stranded DNA, which contains the decamer sequence CAACTTGATA is efficiently nicked by the phi X gene A protein. The present results indicate that for nicking of double-stranded supercoiled DNA nucleotide sequence homology with the phi X origin region of more than 20 nucleotides is required. These results suggest a model for initiation of phi X RF DNA replication, which involves the presence of the recognition sequence CAACTTGATA of the phi X gene A protein as well as a second specific nucleotide sequence which is required for the binding of the phi X gene A protein. This binding causes local unwinding of the DNA double helix and exposure of the recognition sequence in a single-stranded form, which then can be nicked by phi X gene A protein.     

Mechanism of replication of bacteriophage phi X174. XXII. Site-specific mutagenesis of the A* gene reveals that A* protein is not essential for phi X174 DNA replication

The A and A* proteins of phage phi X174 are encoded in the same reading frame in the viral genome; the smaller A protein is the result of a translational start signal with the A gene. To differentiate their respective functions, oligonucleotide-directed site-specific mutagenesis was used to change the ATG start codon of the phi X 174 A* gene, previously cloned into pCQV2 under lambda repressor control, into a TAG stop codon. The altered A gene was then inserted back into phi X replicative form DNA to produce an amber mutant, phi XamA*. Two different Escherichia coli amber suppressor strains infected with this mutant produced viable progeny phage with only a slight reduction in yield. In Su+ cells infected with phi XamA*, phi X gene A protein, altered at one amino acid, was synthesized at normal levels; A* protein was not detectable. These observations indicate that the A* protein increases the replicative efficiency of the phage, perhaps by shutting down host DNA replication, but is not required for replication of phi X174 DNA or the packaging of the viral strand under the conditions tested.     

Differential survival and chloramphenicol-insensitive error-prone repair of hydroxylamine-inactivated phi X174 bacteriophage mutants

Features of inactivation, repair and concomitant mutagenesis of hydroxylamine-treated phi X174 bacteriophages are reported here. (1) For reasons unknown, the nonsense phage mutants tested here were far more sensitive to hydroxylamine than the wild-type phage. In contrast, the sensitivities of these same phi X174 mutants to UV-irradiation are indistinguishable. (2) Hydroxylamine-treated amber phages mutated to ochre but not to wild-type particles, i.e., G leads to A transition events were recovered. (3) The repair of phi X174 phages from hydroxylamine-induced damage was error-prone, but unlike UV damage, did not require protein synthesis de novo. Possible mechanisms of these novel features are discussed.     

Effects of genome size on bacteriophage phi X174 DNA packaging in vitro

Effects of the size of template DNA on the DNA packaging reaction of bacteriophage phi X174 were studied using plasmids of various sizes which contain the phi X174 origin of DNA replication and the in vitro phage synthesizing system (Aoyama, A., Hamatake, R. K., and Hayashi, M. (1983) Proc. Natl. Acad. Sci. U.S.A. 80, 4195-4199). DNA between 78.5% and 101% of the length of phi X174 DNA produced infectious particles efficiently. Packaging of DNA smaller or larger than this range produced uninfectious defective particles. Although these particles contained circular single-stranded DNA, they suffered structural changes which altered the sedimentation properties or the ability to adsorb to the cells. Mutant phage were found from the packaging reaction of DNA larger than 101% of phi X174 DNA. These mutants deleted the termination region of DNA, suggesting that they were produced by early termination of the phage synthesizing reaction.     

Gene A protein cleavage of recombinant plasmids containing the phi X174 replication origin

Synthetic oligonucleotides, DNA ligase and DNA polymerase were used to construct double-stranded DNA fragments homologous to the first 25, 27 or 30 b.p. of the origin of replication of bacteriophage phi X174 (nucleotides 4299-4328 of the phi X174 DNA sequence). The double-stranded DNA fragments were cloned into the unique SmaI or HindIII restriction sites in the kanamycin-resistance gene of pACYC177 (AmpR, KmR). Recombinant plasmids were picked up by colony hybridization. DNA sequencing showed that not only recombinant plasmids with the expected insert were formed, but also recombinant plasmids with a shorter insert. Recombinant plasmids with an insert homologous to the first 24, 25, 26, 27, 28 or all 30 b.p. of the phi X174 origin region were thus obtained. Supercoiled plasmids containing a sequence homologous to the first 27, 28 or 30 b.p. of the phi X174 origin region are nicked by the phi X174 gene A protein. However, the other supercoiled plasmids are not nicked by the phi X174 gene A protein. These results show that the first 27 b.p. of the phi X174 origin region are sufficient as well as required for the initiation step in phi X174 RF DNA replication, i.e. the cleavage by gene A protein.     

Nucleotide sequence of the genome of the bacteriophage alpha 3: interrelationship of the genome structure and the gene products with those of the phages, phi X174, G4 and phi K.

The complete nucleotide sequence of the genome of the circular single-stranded DNA (isometric) phage alpha 3 has been determined and compared with that of the related phages phi X174 and G4. The alpha 3 genome consists of 6087 nucleotides, which is 701 nucleotides longer than the nucleotide sequence of the phi X174 genome and 510 nucleotides more than that of the G4 genome. The results demonstrated that the three phage species have 11 homologous genes (A, A*, B, C, K, D, E, J, F, G and H), the order of which is fundamentally identical, suggesting that they have evolved from a common ancestor. The sequence of some genes and untranslated intergenic regions, however, differs significantly from phage to phage: for example, the degree of amino acid sequence homology of the gene product is averaged at 47.7% between alpha 3 and phi X174 and 46.9% between alpha 3 and G4, and alpha 3 has a remarkable longer intergenic region composed of 758 nucleotides between the genes H and A compared with the counterparts of phi X174 and G4. Meanwhile, in vivo experiments of genetic complementation showed that alpha 3 can use none of the gene products of phi X174 and G4, whereas the related phage phi K can rescue alpha 3 nonsense mutants of the genes B, C, D and J. These sequencing and in vivo rescue results indicated that alpha 3 is closely related to phi K, but distantly remote from phi X174 or G4, and supported an evolutional hypothesis which has been so far proposed that the isometric phages are classified into three main groups: the generic representatives are phi X174, G4 and alpha 3.     

Synthesis of bacteriophage phi X174 in vitro: mechanism of switch from DNA replication to DNA packaging

Replication of a replicative form DNA of bacteriophage phi X174 initiates by rolling-circle synthesis of the viral DNA followed by discontinuous synthesis of the complementary DNA. Gene C protein of phi X174, which is involved in DNA packaging, inhibits the rolling-circle DNA synthesis by binding to the initiation complex in vitro. The gene C protein-associated initiation complex can synthesize and package the viral DNA to produce infectious phage when supplemented with phi X174 gene J protein and the prohead. Multiple rounds of phage synthesis occur without dissociation of the gene C protein from the complex. These results indicate that gene C protein is central in the switch from replication of a replicative form DNA to synthesis and concomitant packaging of viral DNA into phage capsid, which occurs in the late stage of infection.     

Studies of the recognition sequence of phi X174 gene A protein. Cleavage site of phi X gene A protein in St-1 RFI DNA.

It is already known that phi X gene A protein converts besides phi X RFI DNA also the RFI DNAs of the single-stranded bacteriophages G4, St-1, alpha 3 and phi K into RFII DNA. We have extended this observations for bacteriophages G14 and U3. Restriction enzyme analysis placed the phi X gene A protein cleavage site in St-1 RF DNA in the HinfI restriction DNA fragment F10 and in the overlapping HaeIII restriction DNA fragment Z7. The exact position and the nucleotide sequence at the 3'-OH end of the nick were determined by DNA sequence analysis of the single-stranded DNA subfragment of the nicked DNA fragment F10 obtained by gelelectrophoresis in denaturing conditions. A stretch of 85 nucleotides of St-1 DNA around the position of the phi X gene A protein cleavage site was established by DNA sequence analysis of the restriction DNA fragment Z7F1. Comparison of this nucleotide sequence with the previously determined nucleotide sequence around the cleavage site of phi X gene A protein in phi X174 RF DNA and G4 RF DNA revealed an identical sequence of only 10 nucleotides. The results suggest that the recognition sequence of the phi X174 gene A protein lies within these 10 nucleotides.     

Growth and DNA synthesis of bacteriophage phi x174 in a dnaP mutant of Escherichia coli.

phi X174am3trD, a temperature-resistant mutant of bacteriophage phi X174am3, exhibited a reduced ability to grow in a dnaP mutant, Escherichia coli KM107, at the restrictive temperature (43 degrees C). Under conditions at which the dnaP gene function was inactivated, the amount and the rate of phi X174am3trD DNA synthesis were reduced. The efficiency of phage attachment to E. coli KM107 at 43 degrees C was the same as to the parental strain, E. coli KD4301, but phage eclipse and phage DNA penetration were inhibited in E. coli KM107 at 43 degrees C. It is suggested that the dnaP gene product, which is necessary for the initiation of host DNA replication, participates in the conversion of attached phages to eclipsed particles and in phage DNA penetration in vivo in normal infection.     

DNA synthesis in Escherichia coli cells infected with gene H mutants of bacteriophage phi X174.

Escherichia coli cells infected with gene H mutants of bacteriophage phi X174 produce two types of particles. The 110S particles contain single-stranded circular DNA; the 110S particles are not infectious, although their DNA is infectious for E. coli spheroplasts. The second type of particles, 70S particles, contain a fragment of single-stranded DNA ranging from 0.2 to 0.5 genome in length. This fragment DNA anneals only to restriction enzyme fragments of replicative-form DNA from the portion of the molecule corresponding to the origin and early region of phi X174 single-stranded synthesis, although full-round single-stranded DNA synthesis is occurring in the H mutant-infected cells. Different H mutant phages produce different proportions of 70S to 110S particles; those mutants producing the most 70S also exhibit the largest amount of degradation of intracellularly labeled DNA during infection. These results suggest that in H mutant-infected cells, full-length single-stranded DNA is synthesized; varying amounts of degradation of the single-stranded material occur, and the resulting fragment DNA is subsequently incorporated into 70S particles.     

Gene K of bacteriophage phi X 174 codes for a nonessential protein.

Gene K of phi X 174, which overlaps genes A, B, and C, was found to be nonessential, although possibly beneficial for the growth of the phage. Viable mutants of gene K made less than 4% of the normal amount of K protein as judged by quantitative fluorography of sodium dodecyl sulfate-polyacrylamide gels; compared with the wild-type phi X, K mutants had an identical latent period but a two- to threefold reduction in burst size.     

Selective cloning of a DNA single-strand initiation determinant from phi X174 replicative-form DNA.

An M13 phage deletion mutant, M13 delta E101, developed as a vector for selecting DNA sequences that direct DNA strand initiation on a single-stranded template, has been used for cloning restriction enzyme digests of phi X174 replicative-form DNA. Initiation determinants, detected on the basis of clear-plaque formation by the chimeric phage, were found only in restriction fragments containing the unique effector site in phi X174 DNA for the Escherichia coli protein n' dATPase (ATPase). Furthermore, these sequences were functional only when cloned in the orientation in which the phi X174 viral strand was joined to the M13 viral strand. A 181-nucleotide viral strand fragment containing this initiation determinant confers a phi X174-type complementary-strand replication mechanism on M13 chimeras. The chimeric phage is converted to the parental replicative form in vivo by a mechanism resistant to rifampin, a specific inhibitor of the normal RNA polymerase-dependent mechanism of M13. In vitro, the chimeric single-stranded DNA promotes the assembly of a functional multiprotein priming complex, or primosome, identical to that utilized by intact phi X174 viral strand DNA. Chimeric phage containing the sequence complementary to the 181-nucleotide viral strand sequence shows no initiation capability, either in vivo or in vitro.     

Requirement for a functional host cell autolytic enzyme system for lysis of Escherichia coli by bacteriophage phi X174

Escherichia coli VC30 is a temperature-sensitive mutant which is defective in autolysis. Strain VC30 lyses at 30 degrees C when treated with beta-lactam antibiotics or D-cycloserine or when deprived of diaminiopimelic acid. The same treatments inhibit growth of the mutant at 42 degrees C but do not cause lysis. Strain VC30 was used here to investigate the mechanism of host cell lysis induced by bacteriophage phi X 174. Strain VC30 was transformed with plasmid pUH12, which carries the cloned lysis gene (gene E) of phage phi X174 under the control of the lac operator-promoter, and with plasmid pMC7, which encodes the lac repressor to keep the E gene silent. Infection of strain VC30(pUH12)(pMC7) with phage phi X174 culminated in lysis at 30 degrees C. At 42 degrees C, intracellular phage development was normal, but lysis did not occur unless a temperature downshift to 30 degrees C was imposed. Similarly, induction of the cloned phi X174 gene E with isopropyl-beta-D-thiogalactoside resulted in lysis at 30 degrees C but not at 42 degrees C. Temperature downshift of the induced culture to 30 degrees C resulted in lysis even in the presence of chloramphenicol. These results indicate that host cell lysis by phage phi X174 is dependent on a functional cellular autolytic enzyme system.     

The nuclease specificity of the bacteriophage phi X174 A* protein.

The A* protein of bacteriophage phi X174 is a single-stranded DNA specific nuclease. It can cleave phi X viral ss DNA in many different places. The position of these sites have been determined within the known phi X174 nucleotide sequence (1). From the sequences at these sites it is clear that the A* protein recognizes and cleaves at sites that show only partial homology with the origin of RF DNA replication in the phi X DNA. Different parts of the origin sequence can be deduced that function as a signal for recognition and cleavage by the A* protein. We conclude that different parts within the DNA recognition domain of the A* protein are functional in the recognition of the origin sequence in single-stranded DNA. The existence of different DNA recognition domains in the A* protein, and therefore also in the A protein, leads to a model that can explain how the A protein performs its multiple function in the phi X174 DNA replication process (2).