A microsatellite-based genetic linkage map for channel catfish, Ictalurus punctatus

Microsatellite loci were identified in channel catfish gene sequences or random clones from a small insert genomic DNA library. Outbred populations of channel catfish contained an average of eight alleles per locus and an average heterozygosity of 0.70. A genetic linkage map of the channel catfish genome (N = 29) was constructed from two reference families. A total of 293 microsatellite loci were polymorphic in one or both families, with an average of 171 informative meioses per locus. Nineteen type I loci, 243 type II loci, and one EST were placed in 32 multipoint linkage groups covering 1958 cM. Nine more type II loci were contained in three two-point linkage groups covering 24.5 cM. Twenty-two type II loci remained unlinked. Multipoint linkage groups ranged in size from 11.9 to 110.5 cM with an average intermarker distance of 8.7 cM. Seven microsatellite loci were closely linked with the sex-determining locus. The microsatellite loci and genetic linkage map will increase the efficiency of selective breeding programs for channel catfish.     

A microsatellite-based linkage map of the honeybee, Apis mellifera L

A linkage map for the honeybee (Apis mellifera) was constructed mainly from the progeny of two hybrid queens (A. m. ligustica x A. m. mellifera). A total of 541 loci were mapped; 474 were microsatellite loci; a few were additional bands produced during PCRs, one of the two rDNA loci (using ITS), the MDH locus, and three sex-linked markers (Q and FB loci and one RAPD band). Twenty-four linkage groups were estimated of which 5 were minute (between 7.1 and 22.8 cM) and 19 were major groups (>76.5 cM). The number of major linkage groups exceeded by three the number of chromosomes of the complement (n = 16). The sum of the lengths of all linkage groups amounts to 4061 cM to which must be added at least 320 cM to link groups in excess, making a total of at least 4381 cM. The length of the largest linkage group I was 630 cM. The average density of markers was 7.5 cM and the average resolution was about one marker every 300 kb. For most of the large groups, the centromeric region was determined genetically, as described in (accompanying article in this issue), using half-tetrad analysis of thelytokous parthenogens in which diploid restoration occurs through central fusion. Several cases of segregation distortion that appreared to result from deleterious recessives were discovered. A low positive interference was also detected.     

Genetic mapping of a cross between Gossypium hirsutum (cotton) and the Hawaiian endemic, Gossypium tomentosum

The existence of five tetraploid species that derive from a common polyploidization event about 1 million years ago makes Gossypium (cotton) an attractive genus in which to study polyploid evolution and offers opportunities for crop improvement through introgression. To date, only crosses (HB) between the cultivated tetraploid cottons Gossypium hirsutum and G. barbadense have been genetically mapped. Genetic analysis of a cross (HT) between G. hirsutum and the Hawaiian endemic G. tomentosum is reported here. Overall, chromosomal lengths are closely correlated between the HB and HT maps, although there is generally more recombination in HT, consistent with a closer relationship between the two species. Interspecific differences in local recombination rates are observed, perhaps involving a number of possible factors. Our data corroborate cytogenetic evidence that chromosome arm translocations have not played a role in the divergence of polyploid cottons. However, one terminal inversion on chromosome (chr.) 3 does appear to differentiate G. tomentosum from G. barbadense; a few other apparent differences in marker order fall near gaps in the HT map and/or lack the suppression of recombination expected of inversions, and thus remain uncertain. Genetic analysis of a discrete trait that is characteristic of G. tomentosum, nectarilessness, mapped not to the classically reported location on chr. 12 but to the homoeologous location on chr. 26. We propose some hypotheses for further study to explore this incongruity. Preliminary quantitative trait locus (QTL) analysis of this small population, albeit with a high probability of false negatives, suggests a different genetic control of leaf morphology in HT than in HB, which also warrants further investigation.     

Construction of a comprehensive PCR-based marker linkage map and QTL mapping for fiber quality traits in upland cotton (Gossypium hirsutum L.)

To facilitate marker assisted selection, there is an urgent need to construct a saturated genetic map of upland cotton (Gossypium hirsutum L.). Four types of markers including SSR, SRAP, morphological marker, and intron targeted intron–exon splice junction (IT-ISJ) marker were used to construct a linkage map with 270 F_2:7 recombinant inbred lines derived from an upland cotton cross (T586 × Yumian 1). A total of 7,508 SSR, 740 IT-ISJ and 384 SRAP primer pairs/combinations were used to screen for polymorphism between the two mapping parents, and the average polymorphisms of three types of molecular markers represented 6.8, 6.6 and 7.0%, respectively. The polymorphic primer pairs/combinations and morphological markers were used to genotype 270 recombinant inbred lines, and a map including 604 loci (509 SSR, 58 IT-ISJ, 29 SRAP and 8 morphological loci) and 60 linkage groups was constructed. The map spanned 3,140.9 cM with an average interval of 5.2 cM between two markers, approximately accounting for 70.6% of the cotton genome. Fifty-four of 60 linkage groups were ordered into 26 chromosomes. Multiple QTL mapping was used to identify QTL for fiber quality traits in five environments, and thirteen QTL were detected. These QTL included four for fiber length (FL), two for fiber strength (FS), two for fiber fineness (FF), three for fiber length uniformity (FU), and two for fiber elongation (FE), respectively. Each QTL explained between 7.4 and 43.1% of phenotypic variance. Five out of thirteen QTL (FL1 and FU1 on chromosome 6, FL2, FU2 and FF1 on chromosome7) were detected in five environments, and they explained more than 20% of the phenotypic variance. Eleven QTL were distributed on A genome, while the other two on D genome.     

A microsatellite-based, gene-rich linkage map for the AA genome of Arachis (Fabaceae)

Cultivated peanut (Arachis hypogaea) is an important crop, widely grown in tropical and subtropical regions of the world. It is highly susceptible to several biotic and abiotic stresses to which wild species are resistant. As a first step towards the introgression of these resistance genes into cultivated peanut, a linkage map based on microsatellite markers was constructed, using an F₂ population obtained from a cross between two diploid wild species with AA genome (A. duranensis and A. stenosperma). A total of 271 new microsatellite markers were developed in the present study from SSR-enriched genomic libraries, expressed sequence tags (ESTs), and by “data-mining” sequences available in GenBank. Of these, 66 were polymorphic for cultivated peanut. The 271 new markers plus another 162 published for peanut were screened against both progenitors and 204 of these (47.1%) were polymorphic, with 170 codominant and 34 dominant markers. The 80 codominant markers segregating 1:2:1 (P<0.05) were initially used to establish the linkage groups. Distorted and dominant markers were subsequently included in the map. The resulting linkage map consists of 11 linkage groups covering 1,230.89 cM of total map distance, with an average distance of 7.24 cM between markers. This is the first microsatellite-based map published for Arachis, and the first map based on sequences that are all currently publicly available. Because most markers used were derived from ESTs and genomic libraries made using methylation-sensitive restriction enzymes, about one-third of the mapped markers are genic. Linkage group ordering is being validated in other mapping populations, with the aim of constructing a transferable reference map for Arachis.Electronic supplementary material is available for this at     

Molecular linkage map of Einkorn wheat: mapping of storage-protein and soft-glume genes and bread-making quality QTLs

Two molecular maps of Triticum monococcum L were produced and integrated. The integrated map includes a total of 477 markers, 32 RFLPs, 438 AFLPs, one morphological (soft glume (Sog)) and six storage-protein markers, and covers 856 cM. The trait Sog with the recessive allele sog maps to linkage group 2S. Probably, this is the T. monococcum homologue of Tg and Tg2 in hexaploid and tetraploid wheats, respectively. Loci coding for seed storage proteins were allocated to chromosomes 1L (HMW GLU1,2 and Glu1), 1S (LMW GLU6,7, LMW GLU1-4, omega GLI1-4, gamma GLI5 and Gli-1) and 6L (alpha/beta GLI7-14). Parameters related to bread-making quality (SDS sedimentation volume, specific sedimentation volume (SSV) and total protein content) were studied in one of the two populations. A QTL that is consistently present across environments was detected for SDS sedimentation volume and for SSV. The position of the QTL on chromosome 1S was in close agreement with the map positions of storage-protein loci. A second QTL was mapped on chromosome 5. For protein content, two significant QTLs were mapped to linkage groups 1 and 5.     

An RFLP linkage map of Upland cotton, Gossypium hirsutum L.

 Ninety-six F₂.F₃ bulked sampled plots of Upland cotton, Gossypium hirsutum L., from the cross of HS46×MARCABUCAG8US-1-88, were analyzed with 129 probe/enzyme combinations resulting in 138 RFLP loci. Of the 84 loci that segregated as co-dominant, 76 of these fit a normal 1 :  2 : 1 ratio (non-significant chi square at P=0.05). Of the 54 loci that segregated as dominant genotypes, 50 of these fit a normal 3: 1 ratio (non-significant chi square at P=0.05). These 138 loci were analyzed with the MAPMAKER∖ EXP program to determine linkage relationships among them. There were 120 loci arranged into 31 linkage groups. These covered 865 cM, or an estimated 18.6% of the cotton genome. The linkage groups ranged from two to ten loci each and ranged in size from 0.5 to 107 cM. Eighteen loci were not linked. Received: 31 March 1998 / Accepted: 29 April 1998     

Optimization of linkage mapping strategy and construction of a high-density American lotus linkage map

Background

Lotus is a diploid plant with agricultural, medicinal, and ecological significance. Genetic linkage maps are fundamental resources for genome and genetic study, and also provide molecular markers for breeding in agriculturally important species. Genotyping by sequencing revolutionized genetic mapping, the restriction-site associated DNA sequencing (RADseq) allowed rapid discovery of thousands of SNPs markers, and a crucial aspect of the sequence based mapping strategy is the reference sequences used for marker identification.

Results

We assessed the effectiveness of linkage mapping using three types of references for scoring markers: the unmasked genome, repeat masked genome, and gene models. Overall, the repeat masked genome produced the optimal genetic maps. A high-density genetic map of American lotus was constructed using an F₁ population derived from a cross between Nelumbo nucifera ‘China Antique’ and N. lutea ‘AL1’. A total of 4,098 RADseq markers were used to construct the American lotus ‘AL1’ genetic map, and 147 markers were used to construct the Chinese lotus ‘China Antique’ genetic map. The American lotus map has 9 linkage groups, and spans 494.3 cM, with an average distance of 0.7 cM between adjacent markers. The American lotus map was used to anchor scaffold sequences in the N. nucifera ‘China Antique’ draft genome. 3,603 RADseq markers anchored 234 individual scaffold sequences into 9 megascaffolds spanning 67% of the 804 Mb draft genome.

Conclusions

Among the unmasked genome, repeat masked genome and gene models, the optimal reference sequences to call RADseq markers for map construction is repeat masked genome. This high density genetic map is a valuable resource for genomic research and crop improvement in lotus.     

Construction of a molecular linkage map in coffee

A linkage map for coffee (Coffea canephora P.) totalling 1402 cM has been developed on the basis of a population of doubled haploids. Both RFLP markers and PCR-based markers (RAPD) were used to construct 15 linkage groups. Coffee genomic and cDNA clones provided the source of the probes. In total, 47 RFLP and 100 RAPD loci have been placed on the linkage map. A rather low DNA polymorphism rate (18% for RFLP markers and 29% for RAPD primers) was detected. Only 81% of RAPD markers and 85% of RFLP markers fit an expected 11 ratio (P<0.01). The availability of a molecular linkage map has many implications for the future development of the genetics and breeding of this commercially important crop species.     

Meiotic linkage mapping of 52 genes onto the canine map does not identify significant levels of microrearrangement

In an effort to extend our understanding of the evolutionary relationship between the canine and human genomes, we have developed and positioned 52 new gene-associated polymorphic markers on the canine meiotic linkage map. Canine-specific PCR primers were developed from the consensus of published sequences of several mammalian genomes and were designed to span intronic regions, thus optimizing the probability that a polymorphic site was included. The resulting markers were analyzed on a panel of three-generation canine reference families and the data were incorporated into the current meiotic linkage map. The data were compared with those generated by three chromosome paint studies in an effort to understand the distribution and frequency of microrearrangements within the canine genome. Forty-eight of 52 genes map to a chromosomal region predicted to contain genes from the corresponding region of the human genome according to all published reciprocal chromosome paint studies. Meiotic linkage mapping data for three genes can be used to resolve discrepancies between the published reciprocal chromosome paint studies, and for an additional two genes, meiotic mapping data allow evolutionary breakpoints to be more precisely defined. We conclude that microrearrangements of evolutionarily conserved segments between the canine and human genomes are rare, occurring for less than 0.5% of gene data reported to date. In addition, we have found that the placement of genes on the meiotic linkage map is a useful mechanism for resolving discrepancies between existing data sets. Received: 7 February 2001 / Accepted: 9 May 2001     

A microsatellite-based genetic linkage map of the waterflea, Daphnia pulex: On the prospect of crustacean genomics

We describe the first genetic linkage map for Daphnia pulex using 185 microsatellite markers, including 115 new markers reported in this study. Our approach was to study the segregation of polymorphisms in 129 F2 progeny of one F1 hybrid obtained by crossing two genetically divergent lineages of Daphnia isolated from two Oregon populations. The map spanned 1206 Kosambi cM and had an average intermarker distance of 7 cM. Linkage groups ranged in size from 7 to 185 cM and contained 4 to 27 markers. The map revealed 12 linkage groups corresponding to the expected number of chromosomes and covers approximately 87% of the genome. Tests for random segregation of alleles at individual loci revealed that 21% of the markers showed significant transmission ratio distortion (primarily homozygote deficiency) likely due to markers being linked to deleterious recessive alleles. This map will become the anchor for the physical map of the Daphnia genome and will serve as a starting point for mapping single and quantitative trait loci affecting ecologically important phenotypes. By mapping 342 tentative orthologous gene pairs (Daphnia/Drosophila) into the Daphnia linkage map, we facilitate future comparative projects.     

A microsatellite-based consensus linkage map for species of Eucalyptus and a novel set of 230 microsatellite markers for the genus

Background  

Eucalypts are the most widely planted hardwood trees in the world occupying globally more than 18 million hectares as an important source of carbon neutral renewable energy and raw material for pulp, paper and solid wood. Quantitative Trait Loci (QTLs) in Eucalyptus have been localized on pedigree-specific RAPD or AFLP maps seriously limiting the value of such QTL mapping efforts for molecular breeding. The availability of a genus-wide genetic map with transferable microsatellite markers has become a must for the effective advancement of genomic undertakings. This report describes the development of a novel set of 230 EMBRA microsatellites, the construction of the first comprehensive microsatellite-based consensus linkage map for Eucalyptus and the consolidation of existing linkage information for other microsatellites and candidate genes mapped in other species of the genus.     

TetraploidMap for Windows: linkage map construction and QTL mapping in autotetraploid species

An earlier program, TetraploidMap, enabled linkage analysis to be performed for autotetraploid species, with a text-based input and output. The current program, TetraploidMap for Windows, is considerably enhanced, and now goes beyond linkage analysis to perform quantitative trait locus (QTL) interval mapping, with a range of models and thresholds assessed by permutation tests. A Windows-based interface facilitates data entry and exploration. TetraploidMap for Windows is freely available from the Web site of Bioinformatics and Statistics Scotland at http://www.bioss.ac.uk/ (user-friendly software).     

Construction of an integrative linkage map and QTL mapping of grain yield-related traits using three related wheat RIL populations

Key message

A novel high-density consensus wheat genetic map was obtained based on three related RIL populations, and the important chromosomal regions affecting yield and related traits were specified.

Abstract

A prerequisite for mapping quantitative trait locus (QTL) is to build a genetic linkage map. In this study, three recombinant inbred line populations (represented by WL, WY, and WJ) sharing one common parental line were used for map construction and subsequently for QTL detection of yield-related traits. PCR-based and diversity arrays technology markers were screened in the three populations. The integrated genetic map contains 1,127 marker loci, which span 2,976.75 cM for the whole genome, 985.93 cM for the A genome, 922.16 cM for the B genome, and 1,068.65 cM for the D genome. Phenotypic values were evaluated in four environments for populations WY and WJ, but three environments for population WL. Individual and combined phenotypic values across environments were used for QTL detection. A total of 165 putative additive QTL were identified, 22 of which showed significant additive-by-environment interaction effects. A total of 65 QTL (51.5 %) were stable across environments, and 23 of these (35.4 %) were common stable QTL that were identified in at least two populations. Notably, QTkw-5B.1, QTkw-6A.2, and QTkw-7B.1 were common major stable QTL in at least two populations, exhibiting 11.28–16.06, 5.64–18.69, and 6.76–21.16 % of the phenotypic variance, respectively. Genetic relationships between kernel dimensions and kernel weight and between yield components and yield were evaluated. Moreover, QTL or regions that commonly interact across genetic backgrounds were discussed by comparing the results of the present study with those of previous similar studies. The present study provides useful information for marker-assisted selection in breeding wheat varieties with high yield.     

Construction of a reference linkage map for melon.

A map of melon (Cucumis melo L.) with 411 markers (234 RFLPs, 94 AFLPs, 47 RAPDs, 29 SSRs, five inter-SSRs, and two isozymes) and one morphological trait (carpel number) was constructed using the F2 progeny of a cross between the Korean accession P1161375 and the Spanish melon type 'Pinyonet Piel de Sapo'. RFLPs were obtained using 212 probes from different genomic and cDNA melon libraries, including 16 Arabidopsis ESTs, 13 Cucumis known genes, and three resistant gene homologues. Most loci (391) mapped to 12 major linkage groups, spanning a total genetic distance of 1197 cM, with an average map interval of 3 cM/marker. The remaining 21 loci (six RAPDs and 15 AFLPs) were not linked. A majority (66%) of the markers were codominant (RFLPs, SSRs, and isozymes), making them easily transferable to other melon crosses. Such markers can be used as a reference, to merge other melon and cucumber maps already constructed. Indeed, some of them (23 SSRs, 14 RFLPs, one isozyme, and one morphological trait) could act as anchor points with other published cucurbit maps.     

Extending the chicken-human comparative map by placing 15 genes on the chicken linkage map

To increase the number of type I loci on the chicken linkage map, chicken genes containing microsatellite sequences (TAn, CAn, GAn, An) were selected from the nucleotide sequence database and primers were developed to amplify the repeats. Initially, 40 different microsatellites located within genes were tested on a panel of animals from diverse breeds, and identified 17 polymorphic microsatellites. These polymorphisms allowed us to add 15 new genes to the chicken linkage map. In addition, two genes were added to the chicken map by fluorescent in situ hybridization. As the map position of the human homologues of 13 of these genes is known, these markers extend the comparative map between chicken and man. Our results confirm and refine conserved regions between chicken and man on chicken chromosomes 2 and 7 and on linkage group E29C09W09. Furthermore, an additional conserved region is identified on chromosome 7.