Ethanol and acetate synthesis from waste gas using batch culture of Clostridium ljungdahlii

Single inorganic carbon source was used for production of chemicals and fuels via fermentation processes. Clostridium ljungdahlii, a strictly anaerobic autotrophic bacterium, was grown on synthesis gas to produce acetate and ethanol from gaseous substrates. C. ljungdahlii was grown on a various concentrations of carbon monoxide with synthesis gas total pressures of 0.8–1.8 atm with an interval of 0.2 atm. The cell and product yields were 0.015 g cell/g CO and 0.41 g acetate/g CO, respectively. Formation of acetate was steady and the production trend was about the same for all of the gases initial pressure and at constant cell density. The ethanol concentration was enhanced by the initial presence of hydrogen and carbon dioxide in the liquid phase. There was no substrate inhibition while C. ljungdahlii was grown in the batch fermentation, even at high system pressure of 1.6 and 1.8 atm. A desired product molar ratio of ethanol:acetate (5:1) was achieved with total gas pressure of 1.6 and 1.8 atm.     

In silico metabolic engineering of Clostridium ljungdahlii for synthesis gas fermentation

Synthesis gas fermentation is one of the most promising routes to convert synthesis gas (syngas; mainly comprised of H₂ and CO) to renewable liquid fuels and chemicals by specialized bacteria. The most commonly studied syngas fermenting bacterium is Clostridium ljungdahlii, which produces acetate and ethanol as its primary metabolic byproducts. Engineering of C. ljungdahlii metabolism to overproduce ethanol, enhance the synthesize of the native byproducts lactate and 2,3-butanediol, and introduce the synthesis of non-native products such as butanol and butyrate has substantial commercial value. We performed in silico metabolic engineering studies using a genome-scale reconstruction of C. ljungdahlii metabolism and the OptKnock computational framework to identify gene knockouts that were predicted to enhance the synthesis of these native products and non-native products, introduced through insertion of the necessary heterologous pathways. The OptKnock derived strategies were often difficult to assess because increase product synthesis was invariably accompanied by decreased growth. Therefore, the OptKnock strategies were further evaluated using a spatiotemporal metabolic model of a syngas bubble column reactor, a popular technology for large-scale gas fermentation. Unlike flux balance analysis, the bubble column model accounted for the complex tradeoffs between increased product synthesis and reduced growth rates of engineered mutants within the spatially varying column environment. The two-stage methodology for deriving and evaluating metabolic engineering strategies was shown to yield new C. ljungdahlii gene targets that offer the potential for increased product synthesis under realistic syngas fermentation conditions.     

Online measurement of dissolved carbon monoxide concentrations reveals critical operating conditions in gas fermentation experiments

Syngas fermentation is one possible contributor to the reduction of greenhouse gas emissions. The conversion of industrial waste gas streams containing CO or H₂, which are usually combusted, directly reduces the emission of CO₂ into the atmosphere. Additionally, other carbon‐containing waste streams can be gasified, making them accessible for microbial conversion into platform chemicals. However, there is still a lack of detailed process understanding, as online monitoring of dissolved gas concentrations is currently not possible. Several studies have demonstrated growth inhibition of Clostridium ljungdahlii at high CO concentrations in the headspace. However, growth is not inhibited by the CO concentration in the headspace, but by the dissolved carbon monoxide tension (DCOT). The DCOT depends on the CO concentration in the headspace, CO transfer rate, and biomass concentration. Hence, the measurement of the DCOT is a superior method to investigate the toxic effects of CO on microbial fermentation. Since CO is a component of syngas, a detailed understanding is crucial. In this study, a newly developed measurement setup is presented that allows sterile online measurement of the DCOT. In an abiotic experiment, the functionality of the measurement principle was demonstrated for various CO concentrations in the gas supply (0%–40%) and various agitation rates (300–1100 min^?1). In continuous stirred tank reactor fermentation experiments, the measurement showed reliable results. The production of ethanol and 2,3‐butanediol increased with increasing DCOT. Moreover, a critical DCOT was identified, leading to the inhibition of the culture. Thus, the reported online measurement method is beneficial for process understanding. In future processes, it can be used for closed‐loop fermentation control.     

Engineering Clostridium ljungdahlii as the gas-fermenting cell factory for the production of biofuels and biochemicals

Clostridium ljungdahlii is a representative autotrophic gas-fermenting acetogen capable of converting CO₂ and CO into biomass and multiple metabolites. The carbon fixation and conversion based on C. ljungdahlii have great potential for the sustainable production of bulk biochemicals and biofuels using industrial syngas and waste gases. With substantial recent advances in genetic manipulation tools, it has become possible to study and improve the metabolic capability of C. ljungdahlii in gas fermentation. The product scope of C. ljungdahlii has been expanded through the introduction of heterologous production pathways followed by the modification of native metabolic networks. In addition, progress has been made in understanding the physiological and metabolic mechanisms of this anaerobe, contributing to strain designs for expected phenotypes. In this review, we highlight the latest research progresses regarding C. ljungdahlii and discuss the next steps to comprehensively understand and engineer this bacterium for an improved bacterial gas bioconversion platform.     

Ethanol and acetate production by <Emphasis Type="Italic">Clostridium ljungdahlii</Emphasis> and <Emphasis Type="Italic">Clostridium autoethanogenum</Emphasis> using resting cells

Combined gasification and fermentation technologies can potentially produce biofuels from renewable biomass. Gasification generates synthesis gas consisting primarily of CO, CO₂, H₂, N₂, with smaller amounts of CH₄, NO_x, O₂, C₂ compounds, ash and tars. Several anaerobic bacteria species can ferment bottled mixtures of pure synthesis gas constituents. However, there are challenges to maintaining culture viability of synthesis gas exposed cells. This study was designed to enhance culture stability and improve ethanol-to-acetate ratios using resting (non-growing) cells in synthesis gas fermentation. Resting cell states were induced in autotrophic Clostridium ljungdahlii cultures with minimal ethanol and acetate production due to low metabolic activity compared to growing cell production levels of 5.2 and 40.1 mM of ethanol and acetate. Clostridium autoethanogenum cultures were not induced into true resting states but did show improvement in total ethanol production (from 5.1 mM in growing cultures to 9.4 in one nitrogen-limited medium) as well as increased shifts in ethanol-to-acetate production ratios.     

Incorporating hydrodynamics into spatiotemporal metabolic models of bubble column gas fermentation

Gas fermentation has emerged as a technologically and economically attractive option for producing renewable fuels and chemicals from carbon monoxide (CO) rich waste streams. LanzaTech has developed a proprietary strain of the gas fermentating acetogen Clostridium autoethanogenum as a microbial platform for synthesizing ethanol, 2,3-butanediol, and other chemicals. Bubble column reactor technology is being developed for the large-scale production, motivating the investigation of multiphase reactor hydrodynamics. In this study, we combined hydrodynamics with a genome-scale reconstruction of C. autoethanogenum metabolism and multiphase convection–dispersion equations to compare the performance of bubble column reactors with and without liquid recycle. For both reactor configurations, hydrodynamics was predicted to diminish bubble column performance with respect to CO conversion, biomass production, and ethanol production when compared with bubble column models in which the gas phase was modeled as ideal plug flow plus axial dispersion. Liquid recycle was predicted to be advantageous by increasing CO conversion, biomass production, and ethanol and 2,3-butanediol production compared with the non-recycle reactor configuration. Parametric studies performed for the liquid recycle configuration with two-phase hydrodynamics showed that increased CO feed flow rates (more gas supply), smaller CO gas bubbles (more gas–liquid mass transfer), and shorter column heights (more gas per volume of liquid per time) favored ethanol production over acetate production. Our computational results demonstrate the power of combining cellular metabolic models and two-phase hydrodynamics for simulating and optimizing gas fermentation reactors.     

Lactose-Inducible System for Metabolic Engineering of Clostridium ljungdahlii

The development of tools for genetic manipulation of Clostridium ljungdahlii has increased its attractiveness as a chassis for autotrophic production of organic commodities and biofuels from syngas and microbial electrosynthesis and established it as a model organism for the study of the basic physiology of acetogenesis. In an attempt to expand the genetic toolbox for C. ljungdahlii, the possibility of adapting a lactose-inducible system for gene expression, previously reported for Clostridium perfringens, was investigated. The plasmid pAH2, originally developed for C. perfringens with a gusA reporter gene, functioned as an effective lactose-inducible system in C. ljungdahlii. Lactose induction of C. ljungdahlii containing pB1, in which the gene for the aldehyde/alcohol dehydrogenase AdhE1 was downstream of the lactose-inducible promoter, increased expression of adhE1 30-fold over the wild-type level, increasing ethanol production 1.5-fold, with a corresponding decrease in acetate production. Lactose-inducible expression of adhE1 in a strain in which adhE1 and the adhE1 homolog adhE2 had been deleted from the chromosome restored ethanol production to levels comparable to those in the wild-type strain. Inducing expression of adhE2 similarly failed to restore ethanol production, suggesting that adhE1 is the homolog responsible for ethanol production. Lactose-inducible expression of the four heterologous genes necessary to convert acetyl coenzyme A (acetyl-CoA) to acetone diverted ca. 60% of carbon flow to acetone production during growth on fructose, and 25% of carbon flow went to acetone when carbon monoxide was the electron donor. These studies demonstrate that the lactose-inducible system described here will be useful for redirecting carbon and electron flow for the biosynthesis of products more valuable than acetate. Furthermore, this tool should aid in optimizing microbial electrosynthesis and for basic studies on the physiology of acetogenesis.     

Influence of process parameters on growth of Clostridium ljungdahlii and Clostridium autoethanogenum on synthesis gas

Effects of initial medium pH and gas flow rate on Clostridium ljungdahlii and Clostridium autoethanogenum in liquid batch, continuous gas fermentations were investigated. Synthesis gas components were supplied at varying flow rates (5, 7.5 and 10 mL/min) for C. ljungdahlii (pH 6.8 and 5.5) and C. autoethanogenum (pH 6.0). Growth on synthesis gas was slower than growth on sugars. For C. ljungdahlii, higher cell densities were achieved at pH 6.8 (579 mg/L) compared to pH 5.5 (378 mg/L). The ethanol concentration at pH 6.8 was also 110% greater than that at pH 5.5. The interaction of flow rate and pH was statistically significant with the greatest acetate production in the 10 mL/min, pH 6.8 treatment. The ethanol to acetate ratios were smaller at lower pH levels and higher flow rates. In C. autoethanogenum fermentations, higher flow rates resulted in greater end product formation with no significant effect on product ratios.     

Opuntia ficus-indica cladodes as feedstock for ethanol production by Kluyveromyces marxianus and Saccharomyces cerevisiae

The feasibility of ethanol production using an enzymatic hydrolysate of pretreated cladodes of Opuntia ficus-indica (prickly pear cactus) as carbohydrate feedstock was investigated, including a comprehensive chemical analysis of the cladode biomass and the effects of limited aeration on the fermentation profiles and sugar utilization. The low xylose and negligible mannose content of the cladode biomass used in this study suggested that the hemicellulose structure of the O. ficus-indica cladode was atypical of hardwood or softwood hemicelluloses. Separate hydrolysis and fermentation and simultaneous saccharification and fermentation procedures using Kluyveromyces marxianus and Saccharomyces cerevisiae at 40 and 35 °C, respectively, gave similar ethanol yields under non-aerated conditions. In oxygen-limited cultures K. marxianus exhibited almost double the ethanol productivity compared to non-aerated cultures, although after sugar depletion utilization of the produced ethanol was evident. Ethanol concentrations of up to 19.5 and 20.6 g l^?1 were obtained with K. marxianus and S. cerevisiae, respectively, representing 66 and 70 % of the theoretical yield on total sugars in the hydrolysate. Because of the low xylan content of the cladode biomass, a yeast capable of xylose fermentation might not be a prerequisite for ethanol production. K. marxianus, therefore, has potential as an alternative to S. cerevisiae for bioethanol production. However, the relatively low concentration of fermentable sugars in the O. ficus-indica cladode hydrolysate presents a technical constraint for commercial exploitation.     

Bioprospecting of thermo- and osmo-tolerant fungi from mango pulp–peel compost for bioethanol production

The persistent edaphic stress on microbial succession due to dynamic changes during composting was explored for selection of multi-stress tolerant microbe(s) desirable for ethanol production. A total of 23 strains were isolated from mango compost using four successive enrichments in YP broth (g l^?1): glucose, 100; 150; 250 with ethanol (40) and cycloheximide (0.4) at 40 °C, pH 6.0. Based on multi-gene ribotyping, 14 yeasts (61 %) of Saccharomycetaceae, 2 filamentous fungi (8.6 %) and 7 bacteria (30.4 %) were obtained. Phenetic and phylogenetic analysis of the 14 yeasts revealed 64.3 % tolerant to 500 g l^?1 glucose, growth at 45 °C and resemblance to Candida sp. (14.3 %), Kluyveromyces marxianus (35.7 %), Pichia kudriavzevii (21.4 %) and Saccharomyces cerevisiae (28.6 %). Assessment of the 14 yeasts in glucose fermentation medium (pH 4.5 at 40 °C) showed ethanol productivity of ≥92 % by 12 yeasts with theoretical yields of 90–97 %. Fermentation of molasses (150 g l^?1 glucose equivalent) by P. kudriavzevii D1C at 40 °C resulted in 73.70 ± 0.02 g l^?1 ethanol and productivity of 4.91 ± 0.01 g l^?1 h^?1. Assessment of P. kudriavzevii D1C revealed multi-stress tolerance towards 5-hydroxymethyl furfural, ethanol (20 %, v/v), high gravity and H₂O₂ (0.3 M) indicating suitability for ethanol production using high gravity molasses and pre-treated lignocellulosic biomass fermentation.     

Role of body size and temporal hydrology in the dietary shifts of shortjaw tapertail anchovy Coilia brachygnathus (Actinopterygii, Engraulidae) in a large floodplain lake

Seasonal water-level changes in floodplain lakes can induce variations in primary and secondary production, thus affecting trophic interactions. In this study, we tested the latter by studying size- and temporal hydrology-related shifts in the diet of shortjaw tapertail anchovy Coilia brachygnathus (Actinopterygii, Engraulidae) from Lake Poyang. During the wet season, δ¹³C values ranged from ?28.2‰ for small anchovies to ?24.6‰ for larger individuals, but δ¹⁵N ranged from 18.9‰ for smaller fish to 12.4‰ for larger fish. Significant ¹³C-enrichment and ¹⁵N-depletion occurred with increasing size, revealing that different carbon sources were used as the fish grew. Given the high hydrologic fluctuation levels, significant differences in δ¹³C values were observed among larger anchovies between seasons, indicating a temporal dietary shift. Anchovies fed primarily on shrimp and fish during the low-water season despite the predominance of zooplankton during the two seasons studied, which indicated increased piscivorous reliance. C. brachygnathus exhibited higher δ¹⁵N values during the wet season because the food items were ¹⁵N-enriched. Human waste brought by floods could be another possible interpretation. Considering C. brachygnathus is an important link between plankton production and higher piscivorous trophic levels, changes in the species are expected to affect the functioning of lake food webs along the trophic pathway.     

A Genetic System for Clostridium ljungdahlii: a Chassis for Autotrophic Production of Biocommodities and a Model Homoacetogen

Methods for genetic manipulation of Clostridium ljungdahlii are of interest because of the potential for production of fuels and other biocommodities from carbon dioxide via microbial electrosynthesis or more traditional modes of autotrophy with hydrogen or carbon monoxide as the electron donor. Furthermore, acetogenesis plays an important role in the global carbon cycle. Gene deletion strategies required for physiological studies of C. ljungdahlii have not previously been demonstrated. An electroporation procedure for introducing plasmids was optimized, and four different replicative origins for plasmid propagation in C. ljungdahlii were identified. Chromosomal gene deletion via double-crossover homologous recombination with a suicide vector was demonstrated initially with deletion of the gene for FliA, a putative sigma factor involved in flagellar biogenesis and motility in C. ljungdahlii. Deletion of fliA yielded a strain that lacked flagella and was not motile. To evaluate the potential utility of gene deletions for functional genomic studies and to redirect carbon and electron flow, the genes for the putative bifunctional aldehyde/alcohol dehydrogenases, adhE1 and adhE2, were deleted individually or together. Deletion of adhE1, but not adhE2, diminished ethanol production with a corresponding carbon recovery in acetate. The double deletion mutant had a phenotype similar to that of the adhE1-deficient strain. Expression of adhE1 in trans partially restored the capacity for ethanol production. These results demonstrate the feasibility of genetic investigations of acetogen physiology and the potential for genetic manipulation of C. ljungdahlii to optimize autotrophic biocommodity production.     

Nitrogen deposition and drought events have non-additive effects on plant growth – Evidence from greenhouse experiments

Climate change and nitrogen deposition affect biodiversity and ecosystem functioning, but interactive effects of these global change drivers are poorly understood. We analysed single and interactive effects of nitrogen (N) fertilisation and drought on the growth performance of Calluna vulgaris. We measured biomass production and allocation, tissue nutrient (N, phosphorus (P) and carbon (C)) concentrations, N allocation patterns (using ¹⁵N tracer) and plant's water status (using δ ¹³C signatures) as response variables in a 2-year greenhouse experiment. N fertilisation increased biomass production and biomass shoot:root ratios. ¹⁵N allocation patterns indicated an increasing aboveground N allocation following N fertilisation. Tissue δ ¹³C signatures were higher in N-fertilised plants. Plant responses to drought were weak. We found strong antagonistic interaction effects of N fertilisation and drought for biomass production. δ ¹³C values peaked when N-fertilised plants were subjected to drought, indicating that N fertilisation increased the evaporative demands of Calluna plants, likely due to increased biomass shoot:root ratios, which in turn resulted in higher drought susceptibility. As an important consequence, even slight drought events may weaken the competitiveness of Calluna when interacting with enhanced airborne N loads. Single-factor studies, thus, need to be complemented by multi-factor analyses to assess conceivable impacts of co-occurring global change drivers.     

Bacteria and Fungi Respond Differently to Multifactorial Climate Change in a Temperate Heathland,Traced with 13C-Glycine and FACE CO2

It is vital to understand responses of soil microorganisms to predicted climate changes, as these directly control soil carbon (C) dynamics. The rate of turnover of soil organic carbon is mediated by soil microorganisms whose activity may be affected by climate change. After one year of multifactorial climate change treatments, at an undisturbed temperate heathland, soil microbial community dynamics were investigated by injection of a very small concentration (5.12 µg C g⁻¹ soil) of ¹³C-labeled glycine (¹³C₂, 99 atom %) to soils in situ. Plots were treated with elevated temperature (+1°C, T), summer drought (D) and elevated atmospheric carbon dioxide (510 ppm [CO2]), as well as combined treatments (TD, TCO2, DCO2 and TDCO2). The ¹³C enrichment of respired CO₂ and of phospholipid fatty acids (PLFAs) was determined after 24 h. ¹³C-glycine incorporation into the biomarker PLFAs for specific microbial groups (Gram positive bacteria, Gram negative bacteria, actinobacteria and fungi) was quantified using gas chromatography-combustion-stable isotope ratio mass spectrometry (GC-C-IRMS).Gram positive bacteria opportunistically utilized the freshly added glycine substrate, i.e. incorporated ¹³C in all treatments, whereas fungi had minor or no glycine derived ¹³C-enrichment, hence slowly reacting to a new substrate. The effects of elevated CO₂ did suggest increased direct incorporation of glycine in microbial biomass, in particular in G⁺ bacteria, in an ecosystem subjected to elevated CO₂. Warming decreased the concentration of PLFAs in general. The FACE CO₂ was ¹³C-depleted (δ¹³C = 12.2‰) compared to ambient (δ¹³C = ∼−8‰), and this enabled observation of the integrated longer term responses of soil microorganisms to the FACE over one year. All together, the bacterial (and not fungal) utilization of glycine indicates substrate preference and resource partitioning in the microbial community, and therefore suggests a diversified response pattern to future changes in substrate availability and climatic factors.     

Ethanol production at 45 °C by Kluyveromyces marxianus IMB3 during growth on molasses pre-treated with Amberlite® and non-living biomass

The use of high concentrations of molasses as a fermentation feed-stock for ethanol production is normally precluded by the presence of inhibitory compounds. Use of the thermotolerant, ethanol-producing yeast strain Kluyveromyces marxianus IMB3 in fermentations containing high concentrations of molasses resulted in sub-optimal production of ethanol. The results suggested that this was caused by the presence of inhibitory materials rather than an intolerance to increased concentrations of ethanol. In the current study we describe the pretreatment of molasses preparations with either an Amberlite^® monobed mixed ion-exchange resin or non-living microbial biomass from a local distillery. In the study molasses samples diluted to yield a final sugar concentration of 160?g/l were used as the substrate. Control fermentations using the untreated molasses dilutions yielded a maximum ethanol concentration of 40?g/l, representing 49% of the maximum theoretical yield. Fermentations using molasses samples pre-treated with Amberlite^® or non-living biomass yielded maximum ethanol concentrations of 58 and 54?g/l, representing 71 and 66% of the maximum theoretical yield, respectively. The results suggest that pre-treatment brings about removal of toxic or inhibitory materials from the fermentation feed-stock and we believe that such pre-treatments, particularly using the less expensive non-living biomass preparations may find a role in processes concerned with the commercial production of ethanol from molasses using this microorganism.     

Metabolic control of Clostridium thermocellum via inhibition of hydrogenase activity and the glucose transport rate

Clostridium thermocellum has the ability to catabolize cellulosic biomass into ethanol, but acetic acid, lactic acid, carbon dioxide, and hydrogen gas (H₂) are also produced. The effect of hydrogenase inhibitors (H₂, carbon monoxide (CO), and methyl viologen) on product selectivity was investigated. The anticipated effect of these hydrogenase inhibitors was to decrease acetate production. However, shifts to ethanol and lactate production are also observed as a function of cultivation conditions. When the sparge gas of cellobiose-limited chemostat cultures was switched from N₂ to H₂, acetate declined, and ethanol production increased 350%. In resting cell suspensions, lactate increased when H₂ or CO was the inhibitor or when the cells were held at elevated hyperbaric pressure (6.8 atm). In contrast, methyl-viologen-treated resting cells produced twice as much ethanol as the other treatments. The relationship of chemostat physiology to methyl viologen inhibition was revealed by glucose transport experiments, in which methyl viologen decreased the rate of glucose transport by 90%. C. thermocellum produces NAD⁺ from NADH by H₂, lactate, and ethanol production. When the hydrogenases were inhibited, the latter two products increased. However, excess substrate availability causes fructose 1,6-diphosphate, the glycolytic intermediate that triggers lactate production, to increase. Compensatory ethanol production was observed when the chemostat fluid dilution rate or methyl viologen decreased substrate transport. This research highlights the complex effects of high concentrations of dissolved gases in fermentation, which are increasingly envisioned in microbial applications of H₂ production for the conversion of synthetic gases to chemicals.     

Microbial CO Conversions with Applications in Synthesis Gas Purification and Bio-Desulfurization

ABSTRACT

Recent advances in the field of microbial physiology demonstrate that carbon monoxide is a readily used substrate by a wide variety of anaerobic micro-organisms, and may be employed in novel biotechnological processes for production of bulk and fine chemicals or in biological treatment of waste streams. Synthesis gas produced from fossil fuels or biomass is rich in hydrogen and carbon monoxide. Conversion of carbon monoxide to hydrogen allows use of synthesis gas in existing hydrogen utilizing processes and is interesting in view of a transition from hydrogen production from fossil fuels to sustainable (CO₂-neutral) biomass. The conversion of CO with H₂O to CO₂ and H₂ is catalyzed by a rapidly increasing group of micro-organisms. Hydrogen is a preferred electron donor in biotechnological desulfurization of wastewaters and flue gases. Additionally, CO is a good alternative electron donor considering the recent isolation of a CO oxidizing, sulfate reducing bacterium. Here we review CO utilization by various anaerobic micro-organisms and their possible role in biotechnological processes, with a focus on hydrogen production and bio-desulfurization.     

Fermentative Utilization of Glycerol by Escherichia coli and Its Implications for the Production of Fuels and Chemicals

Availability, low prices, and a high degree of reduction make glycerol an ideal feedstock to produce reduced chemicals and fuels via anaerobic fermentation. Although glycerol metabolism in Escherichia coli had been thought to be restricted to respiratory conditions, we report here the utilization of this carbon source in the absence of electron acceptors. Cells grew fermentatively on glycerol and exhibited exponential growth at a maximum specific growth rate of 0.040 ± 0.003 h⁻¹. The fermentative nature of glycerol metabolism was demonstrated through studies in which cell growth and glycerol utilization were observed despite blocking several respiratory processes. The incorporation of glycerol in cellular biomass was also investigated via nuclear magnetic resonance analysis of cultures in which either 50% U-¹³C-labeled or 100% unlabeled glycerol was used. These studies demonstrated that about 20% of the carbon incorporated into the protein fraction of biomass originated from glycerol. The use of U-¹³C-labeled glycerol also allowed the unambiguous identification of ethanol and succinic, acetic, and formic acids as the products of glycerol fermentation. The synthesis of ethanol was identified as a metabolic determinant of glycerol fermentation; this pathway fulfills energy requirements by generating, in a redox-balanced manner, 1 mol of ATP per mol of glycerol converted to ethanol. A fermentation balance analysis revealed an excellent closure of both carbon (~95%) and redox (~96%) balances. On the other hand, cultivation conditions that prevent H₂ accumulation were shown to be an environmental determinant of glycerol fermentation. The negative effect of H₂ is related to its metabolic recycling, which in turn generates an unfavorable internal redox state. The implications of our findings for the production of reduced chemicals and fuels were illustrated by coproducing ethanol plus formic acid and ethanol plus hydrogen from glycerol at yields approaching their theoretical maximum.