Production and characterization of thermostable xylanase and pectinase from Streptomyces sp. QG-11-3

Streptomyces sp. QG-11-3, which produces a cellulase-free thermostable xylanase (96 IU ml⁻¹) and a pectinase (46 IU ml⁻¹), was isolated on Horikoshi medium supplemented with 1% w/v wheat bran. Carbon sources that favored xylanase production were rice bran (82 IU ml⁻¹) and birch-wood xylan (81 IU ml⁻¹); pectinase production was also stimulated by pectin and cotton seed cake (34 IU ml⁻¹ each). The partially purified xylanase and pectinase were optimally active at 60°C. Both enzymes were 100% stable at 50°C for more than 24 h. The half-lives of xylanase and pectinase at 70, 75 and 80°C were 90, 75 and 9 min, and 90, 53 and 7 min, respectively. The optimum pH values for xylanase and pectinase were 8.6 and 3.0, respectively, at 60°C. Xylanase and pectinase were stable over a broad pH range between 5.4 and 9.4 and 2.0 to 9.0, respectively, retaining more than 85% of their activity. Ca²⁺ stimulated the activity of both enzymes up to 7%, whereas Cd²⁺, Co²⁺, Cr³⁺, iodoacetic acid and iodoacetamide inhibited xylanase up to 35% and pectinase up to 63%; at 1 mM, Hg²⁺ inhibited both enzymes completely. Journal of Industrial Microbiology & Biotechnology (2000) 24, 396–402. Received 29 September 1999/ Accepted in revised form 02 February 2000     

Production of xylanase from a newly isolated <Emphasis Type="Italic">Penicillium</Emphasis> sp. ZH-30

A new strain of Penicillium sp. ZH-30 that produces xylanase was isolated from soil. According to the morphology and comparison of internal transcribed spacer (ITS) rDNA gene sequence, the strain Penicillium sp. ZH-30 was identified as a strain of Penicillium oxalicum. When xylan or wheat bran was used as substrate at 30°C for 3 days under submerged cultivation, xylanase production was 5.3 and 13.3 U ml⁻¹, respectively. The temperature and pH for optimum activity were 50°C and 5.0–6.0, respectively.     

Hyaluronic acid production by recombinant <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

A gene encoding a new xylanase, named xynZG, was cloned by the genome-walking PCR method from the nematophagous fungus Plectosphaerella cucumerina. The genomic DNA sequence of xynZG contains a 780 bp open reading frame separated by two introns with the sizes of 50 and 46 bp. To our knowledge, this would be the first functional gene cloned from P. cucumerina. The 684 bp cDNA was cloned into vector pHBM905B and transformed into Pichia pastoris GS115 to select xylanase-secreting transformants on RBB-xylan containing plate. The optimal secreting time was 3 days at 25°C and enzymatic activities in the culture supernatants reached the maximum level of 362 U ml⁻¹. The molecular mass of the enzyme was estimated to be 19 kDa on SDS-PAGE. The optimal pH and temperature of the purified enzyme is 6 and 40°C, respectively. The purified enzyme is stable at room temperature for at least 10 h. The K _m and V _max values for birchwood xylan are 2.06 mg ml⁻¹ and 0.49 mmol min⁻¹mg⁻¹, respectively. The inhibitory effects of various mental ions were investigated. It is interesting to note that Cu²⁺ ion, which strongly inhibits most other xylanases studied, reduces enzyme activity by only 40%. Furthermore, enzyme activity is unaffected by EDTA even at a concentration of 5 mM.     

Production,purification, and characterization of acetyl esterase from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. PC22 and its action in cooperation with xylanolytic enzymes on xylan degradation

Acetyl esterase was produced by Streptomyces sp. PC22 at comparable levels of about 0.3 U ml⁻¹ using either 1.0% (w/v) birchwood xylan or 1.5% (w/v) corn husks as a carbon source and cultivating at 45 °C, at pH 9 for 3 or 2 days, respectively. The enzyme was purified from culture filtrate to about 54-fold purity by ammonium sulfate precipitation, followed by consecutive chromatography using a Macro-Prep DEAE, t-butyl hydrophobic interaction and hydroxyapatite, respectively. The approximate molecular weight of the purified enzyme was 155 kDa as analyzed by gel filtration, and it contained four identical 34 kDa subunits, as assessed by SDS-PAGE. It had K _m and V _max values for p-nitrophenyl acetate of 0.43 mM and 70.78 U mg⁻¹ and 7.8 mM and 1,027 U mg⁻¹ for α-naphthyl acetate, respectively. Its optimal pH and temperature were 6.5–7.0 and 50 °C, respectively. It was stable for 30 min at a broad range of pH values, from 5.0 to 9.0, and at temperatures up to 60 °C. The purified enzyme had no other xylanolytic activities. It showed cooperative action on birchwood xylan degradation, when used in combination with xylanase from the same strain and β-xylosidase from Streptomyces sp. CH7. Enhancement was 1.4-fold, compared to the expected amount of individual enzymes alone. This indicates that the enzyme has potential industrial applications, especially for utilizing renewable hemicelluloses containing acetyl xylan for the production of biofuels or other fermentation products.     

Purification and partial characterization οf a new β-xylosidase from Humicola grisea var. thermoidea

Summary The thermophilic fungus Humicola grisea var. thermoidea produces a mycelium-associated β-xylosidase activity when grown in liquid-state cultures on media containing oat spelt xylan as the carbon source. The β-xylosidase was purified to apparent homogeneity by gel filtration and anion exchange chromatography. Its molecular weight was 37 and 50 kDa, as determined by MALDI/TOF mass spectrometry and SDS-PAGE, respectively. The purified enzyme exhibited maximum activity at 55 °C and pH 6.5. It was also active at pH 8.8, retaining 60% of its activity after 6 h of incubation at 50 °C. β-xylosidase was strongly inactivated by NBS and slightly activated by DTT and β-mercaptoethanol. The enzyme was highly specific for PNPX as the substrate. The purified β-xylosidase showed K _m and V _max values of 1.37 mM and 12.98 IU ml⁻¹, respectively.     

Application of the affinity binding of xylanases to oat-spelt xylan in the purification of endoxylanase CM-2 from Streptomyces chattanoogensis CECT 3336

bstract The use of the insoluble polysaccharides Avicel and oat-spelt xylan for the binding and subsequent purification of active xylanases from Streptomyces chattanoogensis was investigated. Maximum recovery of xylanases was achieved with oat-spelt xylan, using NaCl (2 M) to remove active protein. The application of this technique to the purification of xylanases resulted in the purification of an endoxylanase (CM-2) with high specific activity (729.5 U mg⁻¹). The properties of the purified enzyme, exhibiting activity and stability between 40 °C and 60 °C and between pH 5 and 8, suggest a potential role for both the enzyme and the rapid purification protocol in the removal of hemicelluloses from kraft pulp prior to bleaching. Received: 6 April 1998 / Accepted: 8 May 1998     

Purification,characterization, and potential applications of formate oxidase from <Emphasis Type="Italic">Debaryomyces vanrijiae</Emphasis> MH201

Formate oxidase was found in cell-free extracts of Debaryomyces vanrijiae MH201, a soil isolate. After purification by column chromatography, the preparation showed a protein band corresponding to a molecular mass (MM) of 64 kDa on sodium dodecyl sulfate–polyacrylamide gel electrophoresis. The MM, estimated by a gel filtration, was 99 kDa. The preparation showed two and three bands on isoelectric focusing under denaturing and native conditions, respectively. These results suggest that the preparation contained three isoforms, each of which might be composed of αα, αβ, and ββ subunits with apparently similar MM. The preparation acted on formate with K _m and V _max values of 11.7 mM and 262 μmol min⁻¹ mg⁻¹, respectively, at pH 4.5 and 25°C, but showed no evidence of activity on the other compounds tested. The optimum pH and temperature were pH 4.0 and 35°C, respectively. The preparation showed activities of 85% of the initial activity after storage at pH 6.0 and 4°C for 8 weeks. When 10 mM formaldehyde was reacted with 2.0 U ml⁻¹ of the enzyme preparation at pH 5.5 and room temperature in the presence of 2.0 U ml⁻¹ of a microbial aldehyde oxidase and 100 U ml⁻¹ of catalase for 180 min, neither of formate nor formaldehyde was detected, suggesting that the reaction involved the quantitative conversion of formaldehyde to carbon dioxide.     

Characterization of hyperthermostable α-amylase from Geobacillus sp. IIPTN

A newly isolated Geobacillus sp. IIPTN (MTCC 5319) from the hot spring of Uttarakhand's Himalayan region produced a hyperthermostable α-amylase. The microorganism was characterized by biochemical tests and 16S rRNA gene sequencing. The optimal temperature and pH were 60°C and 6.5, respectively, for growth and enzyme production. Although it was able to grow in temperature ranges from 50 to 80°C and pH 5.5–8.5. Maximum enzyme production was in exponential phase with activity 135 U ml⁻¹ at 60°C. Assayed with cassava as substrate, the enzyme displayed optimal activity 192 U ml⁻¹ at pH 5.0 and 80°C. The enzyme was purified to homogeneity with purification fold 82 and specific activity 1,200 U mg⁻¹ protein. The molecular mass of the purified enzyme was 97 KDa. The values of K _m and V _max were 36 mg ml⁻¹ and 222 μmol mg⁻¹ protein min⁻¹, respectively. The amylase was stable over a broad range of temperature from 40°C to 120°C and pH ranges from 5 to 10. The enzyme was stimulated with Mn²⁺, whereas it was inhibited by Hg²⁺, Cu²⁺, Zn²⁺, Mg²⁺, and EDTA, suggesting that it is a metalloenzyme. Besides hyperthermostability, the novelty of this enzyme is resistance against protease.     

Comparative profiles of α-amylase production in conventional tray reactor and GROWTEK bioreactor

GROWTEK bioreactor was used as modified solid-state fermentor to circumvent many of the problems associated with the conventional tray reactors for solid-state fermentation (SSF). Aspergillus oryzae IFO-30103 produced very high levels of α-amylase by modified solid-state fermentation (mSSF) compared to SSF carried out in enamel coated metallic trays utilizing wheat bran as substrate. High α-amylase yield of 15,833 U g⁻¹ dry solid in mSSF were obtained when the fungus were cultivated at an initial pH of 6.0 at 32°C for 54 h whereas α-amylase production in SSF reached its maxima (12,899 U g⁻¹ dry solid ) at 30°C after 66 h of incubation. With the supplementation of 1% NaNO₃, the maximum activity obtained was 19,665 U g⁻¹ dry solid (24% higher than control) in mSSF, whereas, in SSF maximum activity was 15,480 U g⁻¹ dry solid in presence of 0.1% Triton X-100 (20% higher than the control).     

Reduction of Cr(VI) by a Bacillus sp.

A Bacillus sp. RE was resistant to chromium and reduced Cr(VI) without accumulating chromium inside the cell. When Cr(VI) was 10 and 40 μg ml⁻¹, >95% of the total Cr(VI) was reduced in 24 and 72 h of growth, respectively, whereas at 80 μg Cr(VI) ml⁻¹ only 50% of Cr(VI) was reduced. However growth was not affected; the cell mass was 0.7–0.8 mg ml⁻¹ in all cases. The cell-free extract showed Cr(VI) reducing enzyme activity which was enhanced (>5 fold) by NADH and NADPH. Like whole cells the enzyme also reduced Cr(VI) with decreasing efficiency on increasing Cr(VI) concentration. The enzyme activity was optimal at pH 6.0 and 30 °C. The enzyme was stable up to 30 °C and from pH 5.5 to 8, but from pH 4 to 5 the enzyme was severely destabilized. Its K_m and V_max were 14 μm and 3.8 nmol min⁻¹ mg⁻¹ respectively. The enzyme activity was enhanced by Cu²⁺ and Ni²⁺ and inhibited by Hg²⁺. Received 21 September 2005; Revisions requested 5 October 2005; Revisions received 16 November 2005; Accepted 16 November 2005     

Production of a novel raw-starch-digesting glucoamylase by <Emphasis Type="Italic">Penicillium</Emphasis> sp. X-1 under solid state fermentation and its use in direct hydrolysis of raw starch

Penicillium sp. X−1, isolated from decayed raw corn, produced high level of raw-starch-digesting glucoamylase (RSDG) under solid state fermentation (SSF). Maximum enzyme yield of 306.2 U g⁻¹ dry mouldy bran (DMB) was obtained after 36 h of culture upon optimized production. The enzyme could hydrolyse both small and large granule starches but did not adsorb on raw starch. The enzyme exhibited maximum activity at 65°C and pH 6.5, which provided an opportunity of synergism with α-amylase. It significantly hydrolysed 15% (w/v) raw corn starch slurry in synergism with the commercial α-amylase and a degree of hydrolysis of 92.4% was obtained after 2 h of incubation.     

Production of high activity thermostable phytase from thermotolerant Aspergillus niger in solid state fermentation

The thermotolerant fungus, Aspergillus niger NCIM 563, was used for production of extracellular phytase on agricultural residues: wheat bran, mustard cake, cowpea meal, groundnut cake, coconut cake, cotton cake and black bean flour in solid state fermentation (SSF). Maximum enzyme activity (108 U g⁻¹ dry mouldy bran, DMB) was obtained with cowpea meal. During the fermentation phytic acid was hydrolysed completely with a corresponding increase in biomass and phytase activity within 7 days. Phosphate in the form of KH₂PO₄ (10 mg per 100 g of agriculture residue) increased phytase activity. Among various surfactants added to SSF, Trition X-100 (0.5%) exhibited a 30% increase in phytase activity. The optimum pH and temperature of the crude enzyme were 5.0 and 50°C respectively. Phytase activity (86%) was retained in buffer of pH 3.5 for 24 h. The enzyme retained 75% of its activity on incubation at 55°C for 1 h. In the presence of 1 mM K⁺ and Zn²⁺, 95% and 55% of the activity were retained. Scanning electron microscopy showed a high density growth of fungal mycelia on wheat bran particles during SSF. Journal of Industrial Microbiology & Biotechnology (2000) 24, 237–243. Received 07 June 1999/ Accepted in revised form 18 December 1999     

Characterization of a thermostable and alkaline xylanase from Bacillus sp. and its bleaching impact on wheat straw pulp

Delignification efficacy of xylanases to facilitate the consequent chemical bleaching of Kraft pulps has been studied widely. In this work, an alkaline and thermally stable cellulase-less xylanase, derived from a xylanolytic Bacillus subtilis, has been purified by a combination of gel filtration and Q-Sepharose chromatography to its homogeneity. Molecular weight of the purified xylanase was 61 kDa by SDS–PAGE. The purified enzyme revealed an optimum assay temperature and pH of 60°C and 8.0, respectively. Xylanase was active in the pH range of 6.0–9.0 and stable up to 70°C. Divalent ions like Ca²⁺, Mg²⁺ and Zn²⁺ enhanced xylanase activity, whereas Hg²⁺, Fe²⁺, and Cu²⁺ were inhibitory to xylanase at 2 mM concentration. It showed K _m and V _max values of 9.5 mg/ml and 53.6 μmol/ml/min, respectively, using birchwood xylan as a substrate. Xylanase exhibited higher values of turn over number (K _cat) and catalytic efficiency (K _cat/K _m) with birchwood xylan than oat spelt xylan. Bleach-boosting enzyme activity at 30 U/g dry pulp displayed the optimum bio-delignification of Kraft pulp resulting in 26.5% reduction in kappa number and 18.5% ISO induction in brightness at 55°C after 3 h treatment. The same treatment improved the pulp properties including tensile strength and burst index, demonstrating its potential application in pre-bleaching of Kraft pulp.     

Production of inulinase by solid-state fermentation: effect of process parameters on production and preliminary characterization of enzyme preparations

This work was aimed at producing inulinase by solid-state fermentation of sugarcane bagasse, using factorial design to identify the effect of corn steep liquor (CSL) and soybean bran concentration, particle size of bagasse and size of inoculum. Maximum inulinase activity achieved was 250 U per g of dry substrate (gds) at 20% (w/w) of CSL, 5% (w/w) of soybean bran, 1 × 10¹⁰ cells mL⁻¹ and particle size of bagasse in the range 9/32 mesh. The use of soybean bran decreased the time to reach maximum activity from 96 to 24 h and the maximum productivity achieved was 8.87 U gds⁻¹ h⁻¹. The maximum activity was obtained at pH 5.0 and 55.0°C. Within the investigated range, the enzyme extract was more thermostable at 50.0°C, showing a D-value of 123.1 h and deactivation energy of 343.9 kJ gmol⁻¹. The extract showed highest stability from pH 4.5 to 4.8. Apparent K _m and V _max are 7.1 mM and 17.79 M min⁻¹, respectively.     

Expression,purification and characterization of pectate lyase A from <Emphasis Type="Italic">Aspergillus nidulans</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Pectate lyase A (PelA) of Aspergillus nidulans was successfully expressed in Escherichia coli and effectively purified using a Ni²⁺-nitrilotriacetate-agarose column. Enzyme activity of the recombinant PelA could reach 360 U ml⁻¹ medium. The expressed PelA exhibited its optimum level of activity over the range of pH 7.5–10 at 50°C. Mn²⁺, Ca²⁺, Fe²⁺, Mg²⁺ and Fe³⁺ ions stimulated the pectate lyase activity, but Cu²⁺ and Zn²⁺ inhibited it. The recombinant PelA had a V _max of 77 μmol min⁻¹ mg⁻¹ and an apparent K _m of 0.50 mg ml⁻¹ for polygalacturonic acid. Low-esterified pectin was the optimum substrate for the PelA, whereas higher-esterified pectin was hardly cleaved by it. PelA efficiently macerated mung bean hypocotyls and potato tuber tissues into single cells.     

Identification and characterization of a novel xylanase derived from a rice straw degrading enrichment culture

A metagenomic library containing ca. 3.06 × 10⁸ bp insert DNA was constructed from a rice straw degrading enrichment culture. A xylanase gene, umxyn10A, was cloned by screening the library for xylanase activity. The encoded enzyme Umxyn10A showed 58% identity and 73% similarity with a xylanase from Thermobifida fusca YX. Sequence analyses showed that Umxyn10A contained a glycosyl hydrolase family 10 catalytic domain. The gene was expressed in Escherichia coli, and the recombinant enzyme was purified and characterized biochemically. Recombinant Umxyn10A was highly active toward xylan. However, the purified enzyme could slightly hydrolyze β-1,3/4-glucan and β-1,3/6-glucan. Umxyn10A displayed maximal activity toward oat spelt xylan at a high temperature (75°C) and weak acidity (pH 6.5). The K _m and V _max of Umxyn10A toward oat spelt xylan were 3.2 mg ml⁻¹ and 0.22 mmol min⁻¹ mg⁻¹ and were 2.7 mg ml⁻¹ and 1.0 mmol min⁻¹ mg⁻¹ against birchwood xylan, respectively. Metal ions did not appear to be required for the catalytic activity of this enzyme. The enzyme Umxyn10A could efficiently hydrolyze birchwood xylan to release xylobiose as the major product and a negligible amount of xylose. The xylanase identified in this work may have potential application in producing xylobiose from xylan.     

Production and optimization of thermophilic alkaline protease in solid-state fermentation by <Emphasis Type="Italic">Streptomyces</Emphasis> sp. CN902

The purpose of the present research is to study the production of thermophilic alkaline protease by a local isolate, Streptomyces sp. CN902, under solid state fermentation (SSF). Optimum SSF parameters for enzyme production have been determined. Various locally available agro-industrial residues have been screened individually or as mixtures for alkaline protease production in SSF. The combination of wheat bran (WB) with chopped date stones (CDS) (5:5) proved to be an efficient mixture for protease production as it gave the highest enzyme activity (90.50 U g⁻¹) when compared to individual WB (74.50 U g⁻¹) or CDS (69.50 U g⁻¹) substrates. This mixed solid substrate was used for the production of protease from Streptomyces sp. CN902 under SSF. Maximal protease production (220.50 U g⁻¹) was obtained with an initial moisture content of 60%, an inoculum level of 1 × 10⁸ (spore g⁻¹ substrate) when incubated at 45°C for 5 days. Supplementation of WB and CDS mixtures with yeast extract as a nitrogen source further increased protease production to 245.50 U g⁻¹ under SSF. Our data demonstrated the usefulness of solid-state fermentation in the production of alkaline protease using WB and CDS mixtures as substrate. Moreover, this approach offered significant benefits due to abundant agro-industrial substrate availability and cheaper cost.     

Ginsenoside Rd production from the major ginsenoside Rb<Subscript>1</Subscript> by <Emphasis Type="Italic">β</Emphasis>-glucosidase from <Emphasis Type="Italic">Thermus caldophilus</Emphasis>

Under optimum conditions (pH 5, 75°C, and 0.2 U purified enzyme ml⁻¹), 4 mg ginsenoside Rd was produced from 5 mg reagent-grade ginsenoside Rb₁ in 5 ml after 30 min by β-glucosidase from Thermus caldophilus GK24. Using a ginseng root extract containing 1 mg ginsenoside Rb₁ ml⁻¹ and 3.2 mg additional ginsenosides ml⁻¹, 1.23 mg ginsenoside Rd ml⁻¹ was produced after 18 h; the concentrations of ginsenosides Rb₁, Rb₂, and Rc used for ginsenoside Rd production were 0.77, 0.17, and 0.19 mg ml⁻¹, respectively.     

A thermophilic and acid stable family-10 xylanase from the acidophilic fungus Bispora sp. MEY-1

A complete gene, xyl10C, encoding a thermophilic endo-1,4-β-xylanase (XYL10C), was cloned from the acidophilic fungus Bispora sp. MEY-1 and expressed in Pichia pastoris. XYL10C shares highest nucleotide and amino acid sequence identities of 57.3 and 49.7%, respectively, with a putative xylanase from Aspergillus fumigatus Af293 of glycoside hydrolase family 10. A high expression level in P. pastoris (73,400 U ml⁻¹) was achieved in a 3.7–l fermenter. The purified recombinant XYL10C was thermophilic, exhibiting maximum activity at 85°C, which is higher than that reported from any fungal xylanase. The enzyme was also highly thermostable, exhibiting ~100% of the initial activity after incubation at 80°C for 60 min and >87% of activity at 90°C for 10 min. The half lives of XYL10C at 80 and 85°C were approximately 45 and 3 h, respectively. It had two activity peaks at pH 3.0 and 4.5–5.0 (maximum), respectively, and was very acid stable, retaining more than 80% activity after incubation at pH 1.5−6.0 for 1 h. The enzyme was resistant to Co²⁺, Mn²⁺, Cr³⁺ and Ag⁺. The specific activity of XYL10C for oat spelt xylan was 18,831 U mg⁻¹. It also had wide substrate specificity and produced simple products (65.1% xylose, 25.0% xylobiose and 9.9% xylan polymer) from oat spelt xylan.