Analysis of host-cell proteins in biotherapeutic proteins by comprehensive online two-dimensional liquid chromatography/mass spectrometry

Assays for identification and quantification of host-cell proteins (HCPs) in biotherapeutic proteins over 5 orders of magnitude in concentration are presented. The HCP assays consist of two types: HCP identification using comprehensive online two-dimensional liquid chromatography coupled with high resolution mass spectrometry (2D-LC/MS), followed by high-throughput HCP quantification by liquid chromatography, multiple reaction monitoring (LC-MRM). The former is described as a “discovery” assay, the latter as a “monitoring” assay. Purified biotherapeutic proteins (e.g., monoclonal antibodies) were digested with trypsin after reduction and alkylation, and the digests were fractionated using reversed-phase (RP) chromatography at high pH (pH 10) by a step gradient in the first dimension, followed by a high-resolution separation at low pH (pH 2.5) in the second dimension. As peptides eluted from the second dimension, a quadrupole time-of-flight mass spectrometer was used to detect the peptides and their fragments simultaneously by alternating the collision cell energy between a low and an elevated energy (MSE methodology). The MSE data was used to identify and quantify the proteins in the mixture using a proven label-free quantification technique (“Hi3” method). The same data set was mined to subsequently develop target peptides and transitions for monitoring the concentration of selected HCPs on a triple quadrupole mass spectrometer in a high-throughput manner (20 min LC-MRM analysis). This analytical methodology was applied to the identification and quantification of low-abundance HCPs in six samples of PTG1, a recombinant chimeric anti-phosphotyrosine monoclonal antibody (mAb). Thirty three HCPs were identified in total from the PTG1 samples among which 21 HCP isoforms were selected for MRM monitoring. The absolute quantification of three selected HCPs was undertaken on two different LC-MRM platforms after spiking isotopically labeled peptides in the samples. Finally, the MRM quantitation results were compared with TOF-based quantification based on the Hi3 peptides, and the TOF and MRM data sets correlated reasonably well. The results show that the assays provide detailed valuable information to understand the relative contributions of purification schemes to the nature and concentrations of HCP impurities in biopharmaceutical samples, and the assays can be used as generic methods for HCP analysis in the biopharmaceutical industry.     

Profiling the effects of process changes on residual host cell proteins in biotherapeutics by mass spectrometry

An advanced liquid chromatography/mass spectrometry (MS) platform was used to identify and quantify residual Escherichia coli host cell proteins (HCPs) in the drug substance (DS) of several peptibodies (Pbs). Significantly different HCP impurity profiles were observed among different biotherapeutic Pbs as well as one Pb purified via multiple processes. The results can be rationally interpreted in terms of differences among the purification processes, and demonstrate the power of this technique to sensitively monitor both the quantity and composition of residual HCPs in DS, where these may represent a safety risk to patients. The breadth of information obtained using MS is compared to traditional multiproduct enzyme‐linked immunosorbent assay (ELISA) values for total HCP in the same samples and shows that, in this case, the ELISA failed to detect multiple HCPs. The HCP composition of two upstream samples was also analyzed and used to demonstrate that HCPs that carry through purification processes to be detectable in DS are not always among those that are the most abundant upstream. Compared to ELISA, we demonstrate that MS can provide a more comprehensive, and accurate, characterization of DS HCPs, thereby facilitating process development as well as more rationally assessing potential safety risks posed by individual, identified HCPs. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:951–957, 2013     

Advanced mass spectrometry workflows for accurate quantification of trace-level host cell proteins in drug products: Benefits of FAIMS separation and gas-phase fractionation DIA

Therapeutic monoclonal antibodies (mAb) production relies on multiple purification steps before release as a drug product (DP). A few host cell proteins (HCPs) may co-purify with the mAb. Their monitoring is crucial due to the considerable risk they represent for mAb stability, integrity, and efficacy and their potential immunogenicity. Enzyme-linked immunosorbent assays (ELISA) commonly used for global HCP monitoring present limitations in terms of identification and quantification of individual HCPs. Therefore, liquid chromatography tandem mass spectrometry (LC-MS/MS) has emerged as a promising alternative. Challenging DP samples show an extreme dynamic range requiring high performing methods to detect and reliably quantify trace-level HCPs. Here, we investigated the benefits of adding high-field asymmetric ion mobility spectrometry (FAIMS) separation and gas phase fractionation (GPF) prior to data independent acquisition (DIA). FAIMS LC-MS/MS analysis allowed the identification of 221 HCPs among which 158 were reliably quantified for a global amount of 880 ng/mg of NIST mAb Reference Material. Our methods have also been successfully applied to two FDA/EMA approved DPs and allowed digging deeper into the HCP landscape with the identification and quantification of a few tens of HCPs with sensitivity down to the sub-ng/mg of mAb level.     

A mass spectrometry-based approach to host cell protein identification and its application in a comparability exercise

Host cell proteins (HCPs) are process-related impurities present in biopharmaceuticals and are generally considered to be critical quality attributes. Changes in a biopharmaceutical production process may result in qualitative shifts in the HCP population. These shifts are not necessarily detectable when overall HCP levels are measured with traditional approaches such as enzyme-linked immunosorbent assays (ELISAs). Thus, the development of techniques that complement the ELISA’s functionality is desirable. Here, a mass spectrometry (MS)-based approach for the analysis of HCP populations in biopharmaceuticals is presented. It consists of (i) the generation of exclusion lists that represent the masses of the active pharmaceutical ingredient (API), (ii) the compilation of inclusion lists based on an HCP catalog derived from the analysis of protein A-purified samples, and (iii) the analysis of purified biopharmaceuticals using the generated exclusion and inclusion lists. With this approach, it was possible to increase sensitivity for HCP detection compared with a standard liquid chromatography tandem MS (LC–MS/MS) run. The workflow was successfully implemented in a comparability exercise assessing HCP populations in drug substance samples before and after a process change. Furthermore, the results suggest that size can be an important factor in the copurification of HCPs and API.     

Toward the complete characterization of host cell proteins in biotherapeutics via affinity depletions,LC-MS/MS,and multivariate analysis

Host cell protein (HCP) impurities are generated by the host organism during the production of therapeutic recombinant proteins, and are difficult to remove completely. Though commonly present in small quantities, if levels are not controlled, HCPs can potentially reduce drug efficacy and cause adverse patient reactions. A high resolution approach for thorough HCP characterization of therapeutic monoclonal antibodies is presented herein. In this method, antibody samples are first depleted via affinity enrichment (e.g., Protein A, Protein L) using milligram quantities of material. The HCP-containing flow-through is then enzymatically digested, analyzed using nano-UPLC-MS/MS, and proteins are identified through database searching. Nearly 700 HCPs were identified from samples with very low total HCP levels (< 1 ppm to ∼10 ppm) using this method. Quantitation of individual HCPs was performed using normalized spectral counting as the number of peptide spectrum matches (PSMs) per protein is proportional to protein abundance. Multivariate analysis tools were utilized to assess similarities between HCP profiles by: 1) quantifying overlaps between HCP identities; and 2) comparing correlations between individual protein abundances as calculated by spectral counts. Clustering analysis using these measures of dissimilarity between HCP profiles enabled high resolution differentiation of commercial grade monoclonal antibody samples generated from different cell lines, cell culture, and purification processes.     

Relative Quantification of Proteins in Formalin-Fixed Paraffin-Embedded Breast Cancer Tissue Using Multiplexed Mass Spectrometry Assays

The identification of clinically relevant biomarkers represents an important challenge in oncology. This problem can be addressed with biomarker discovery and verification studies performed directly in tumor samples using formalin-fixed paraffin-embedded (FFPE) tissues. However, reliably measuring proteins in FFPE samples remains challenging. Here, we demonstrate the use of liquid chromatography coupled to multiple reaction monitoring mass spectrometry (LC-MRM/MS) as an effective technique for such applications. An LC-MRM/MS method was developed to simultaneously quantify hundreds of peptides extracted from FFPE samples and was applied to the targeted measurement of 200 proteins in 48 triple-negative, 19 HER2-overexpressing, and 20 luminal A breast tumors. Quantitative information was obtained for 185 proteins, including known markers of breast cancer such as HER2, hormone receptors, Ki-67, or inflammation-related proteins. LC-MRM/MS results for these proteins matched immunohistochemistry or chromogenic in situ hybridization data. In addition, comparison of our results with data from the literature showed that several proteins representing potential biomarkers were identified as differentially expressed in triple-negative breast cancer samples. These results indicate that LC-MRM/MS assays can reliably measure large sets of proteins using the analysis of surrogate peptides extracted from FFPE samples. This approach allows to simultaneously quantify the expression of target proteins from various pathways in tumor samples. LC-MRM/MS is thus a powerful tool for the relative quantification of proteins in FFPE tissues and for biomarker discovery.     

MS/MS library facilitated MRM quantification of native peptides prepared by denaturing ultrafiltration

ABSTRACT: Naturally occurring native peptides provide important information about physiological states of an organism and its changes in disease conditions but protocols and methods for assessing their abundance are not well-developed. In this paper, we describe a simple procedure for the quantification of non-tryptic peptides in body fluids. The workflow includes an enrichment step followed by two-dimensional fractionation of native peptides and MS/MS data management facilitating the design and validation of LC- MRM MS assays. The added value of the workflow is demonstrated in the development of a triplex LC-MRM MS assay used for quantification of peptides potentially associated with the progression of liver disease to hepatocellular carcinoma.     

Absolute quantification of Dehalococcoides proteins: enzyme bioindicators of chlorinated ethene dehalorespiration

The quantification of trace proteins in complex environmental samples and mixed microbial communities would be a valuable monitoring tool in countless applications, including the bioremediation of groundwater contaminated with chlorinated solvents. Measuring the concentrations of specific proteins provides unique information about the activity and physiological state of organisms in a sample. We developed sensitive (< 5 fmol), selective bioindicator assays for the absolute quantification of select proteins used by Dehalococcoides spp. when reducing carbon atoms in the common pollutants trichloroethene (TCE) and tetrachloroethene (PCE). From complex whole‐sample digests of two different dechlorinating mixed communities, we monitored the chromatographic peaks of selected tryptic peptides chosen to represent 19 specific Dehalococcoides proteins. This was accomplished using multiple‐reaction monitoring (MRM) assays using nano‐liquid chromatography‐tandem mass spectrometry (nLC‐MS/MS), which provided the selectivity, sensitivity and reproducibility required to quantify Dehalococcoides proteins in complex samples. We observed reproducible peak areas (average CV = 0.14 over 4 days, n = 3) and linear responses in standard curves (n = 5, R² > 0.98) using synthetic peptide standards spiked into a background matrix of sediment peptides. We detected and quantified TCE reductive dehalogenase (TceA) at 7.6 ± 1.7 × 10³ proteins cell^?1 in the KB1^TM bioaugmentation culture, previously thought to be lacking TceA. Fragmentation data from MS/MS shotgun proteomics experiments were helpful in developing the MRM targets. Similar shotgun proteomics data are emerging in labs around the world for many environmentally relevant microbial proteins, and these data are a valuable resource for the future development of MRM assays. We expect targeted peptide quantification in environmental samples to be a useful tool in environmental monitoring.     

Characterization and implications of host-cell protein aggregates in biopharmaceutical processing

In the production of biopharmaceuticals such as monoclonal antibodies (mAbs) and vaccines, the residual amounts of host-cell proteins (HCPs) are among the critical quality attributes. In addition to overall HCP levels, individual HCPs may elude purification, potentially causing issues in product stability or patient safety. Such HCP persistence has been attributed mainly to biophysical interactions between individual HCPs and the product, resin media, or residual chromatin particles. Based on measurements on process streams from seven mAb processes, we have found that HCPs in aggregates, not necessarily chromatin-derived, may play a significant role in the persistence of many HCPs. Such aggregates may also hinder accurate detection of HCPs using existing proteomics methods. The findings also highlight that certain HCPs may be difficult to remove because of their functional complementarity to the product; specifically, chaperones and other proteins involved in the unfolded protein response (UPR) are disproportionately present in the aggregates. The methods and findings described here expand our understanding of the origins and potential behavior of HCPs in cell-based biopharmaceutical processes and may be instrumental in improving existing techniques for HCP detection and clearance.     

Host cell protein quantification by fourier transform mid infrared spectroscopy (FT‐MIR)

Process development in up‐ and downstream processing requires enhanced, non‐time‐consuming, and non‐expensive monitoring techniques to track product purity, for example, the level of endotoxins, viral particles, and host cell proteins (HCPs). Currently, HCP amounts are measured by laborious and expensive HCP‐enzyme‐linked immunosorbent assay (ELISA) assays best suited for measuring HCP amounts in the low concentration regime. The measurement of higher HCP amounts using this method requires dilution steps, adding dilution errors to the measurement. In this work we evaluated the suitability of attenuated total reflection spectroscopy for HCP quantification in process development, using clarified cell culture fluid from monoclonal antibody producing Chinese hamster ovary‐cells after treatment with different polyelectrolytes for semi‐selective clarification. Forty undiluted samples were chosen for multivariate data analysis in the middle infrared range and predicted HCP‐values were in good agreement with results obtained by an ELISA‐assay, suggesting the suitability of this new method for HCP‐quantification. As this method is able to quantify HCP titers ranging from approximately at least 20,000–200,000 ng mL^?1, it is suitable especially for monitoring of process development steps with higher HCP concentrations, omitting dilution errors associated with ELISA assays. Biotechnol. Bioeng. 2013; 110: 252–259. © 2012 Wiley Periodicals, Inc.     

Targeted capture of Chinese hamster ovary host cell proteins: Peptide ligand binding by proteomic analysis

The clearance of host cell proteins (HCPs) is of crucial importance in biomanufacturing, given their diversity in composition, structure, abundance, and occasional structural homology with the product. The current approach to HCP clearance in the manufacturing of monoclonal antibodies (mAbs) relies on product capture with Protein A followed by removal of residual HCPs in flow-through mode using ion exchange or mixed-mode chromatography. Recent studies have highlighted the presence of “problematic HCP” species, which are either difficult to remove (Group I), can degrade the mAb product (Group II), or trigger immunogenic reactions (Group III). To improve the clearance of these species, we developed a family of synthetic peptides that target HCPs and exhibit low binding to IgG product. In this study, these peptides were conjugated onto chromatographic resins and evaluated in terms of HCP clearance and mAb yield, using an industrial mAb-producing CHO harvest as model supernatant. To gather detailed knowledge on the binding of individual HCPs, the unbound fractions were subjected to shotgun proteomic analysis by mass spectrometry. It was found that these peptide ligands exhibit superior HCP binding capability compared to those of the benchmark commercial resins commonly used in mAb purification. In addition, some peptide-based resins resulted in much lower losses of product yield compared to these commercial supports. The proteomic analysis showed effective capture of many “problematic HCPs” by the peptide ligands, especially some that are weakly bound by commercial media. Collectively, these results indicate that these peptides show great promise toward the development of next-generation adsorbents for safer and cost-effective manufacturing of biologics.     

Toward the complete characterization of host cell proteins in biotherapeutics via affinity depletions,LC-MS/MS,and multivariate analysis

Host cell protein (HCP) impurities are generated by the host organism during the production of therapeutic recombinant proteins, and are difficult to remove completely. Though commonly present in small quantities, if levels are not controlled, HCPs can potentially reduce drug efficacy and cause adverse patient reactions. A high resolution approach for thorough HCP characterization of therapeutic monoclonal antibodies is presented herein. In this method, antibody samples are first depleted via affinity enrichment (e.g., Protein A, Protein L) using milligram quantities of material. The HCP-containing flow-through is then enzymatically digested, analyzed using nano-UPLC-MS/MS, and proteins are identified through database searching. Nearly 700 HCPs were identified from samples with very low total HCP levels (< 1 ppm to ～10 ppm) using this method. Quantitation of individual HCPs was performed using normalized spectral counting as the number of peptide spectrum matches (PSMs) per protein is proportional to protein abundance. Multivariate analysis tools were utilized to assess similarities between HCP profiles by: 1) quantifying overlaps between HCP identities; and 2) comparing correlations between individual protein abundances as calculated by spectral counts. Clustering analysis using these measures of dissimilarity between HCP profiles enabled high resolution differentiation of commercial grade monoclonal antibody samples generated from different cell lines, cell culture, and purification processes.     

Comprehensive tracking of host cell proteins during monoclonal antibody purifications using mass spectrometry

An advanced two-dimensional liquid chromatography/mass spectrometry platform was used to quantify individual host cell proteins (HCPs) present at various purification steps for several therapeutic monoclonal antibodies (mAbs) produced in Chinese hamster ovary cells. The methodology produced reproducible identifications and quantifications among replicate analyses consistent with a previously documented individual limit of quantification of ~13 ppm. We were able to track individual HCPs from cell culture fluid to protein A eluate pool to subsequent viral inactivation pool and, in some cases, further downstream. Approximately 500 HCPs were confidently identified in cell culture fluid and this number declined progressively through the purification scheme until no HCPs could be confidently identified in polishing step cation-exchange eluate pools. The protein A eluate pool of nine different mAbs contained widely differing numbers, and total levels, of HCPs, yet the bulk of the total HCP content in each case consisted of a small subset of normally intracellular HCPs highly abundant in cell culture fluid. These observations hint that minimizing cell lysis during cell culture/harvest may be useful in minimizing downstream HCP content. Clusterin and actin are abundant in the protein A eluate pools of most mAbs studied. HCP profiling by this methodology can provide useful information to process developers and lead to the refinement of existing purification platforms.     

Comprehensive tracking of host cell proteins during monoclonal antibody purifications using mass spectrometry

An advanced two-dimensional liquid chromatography/mass spectrometry platform was used to quantify individual host cell proteins (HCPs) present at various purification steps for several therapeutic monoclonal antibodies (mAbs) produced in Chinese hamster ovary cells. The methodology produced reproducible identifications and quantifications among replicate analyses consistent with a previously documented individual limit of quantification of ~13 ppm. We were able to track individual HCPs from cell culture fluid to protein A eluate pool to subsequent viral inactivation pool and, in some cases, further downstream. Approximately 500 HCPs were confidently identified in cell culture fluid and this number declined progressively through the purification scheme until no HCPs could be confidently identified in polishing step cation-exchange eluate pools. The protein A eluate pool of nine different mAbs contained widely differing numbers, and total levels, of HCPs, yet the bulk of the total HCP content in each case consisted of a small subset of normally intracellular HCPs highly abundant in cell culture fluid. These observations hint that minimizing cell lysis during cell culture/harvest may be useful in minimizing downstream HCP content. Clusterin and actin are abundant in the protein A eluate pools of most mAbs studied. HCP profiling by this methodology can provide useful information to process developers and lead to the refinement of existing purification platforms.     

Identification and classification of host cell proteins during biopharmaceutical process development

As significant improvements in volumetric antibody productivity have been achieved by advances in upstream processing over the last decade, and harvest material has become progressively more difficult to recover with these intensified upstream operations, the segregation of upstream and downstream processing has remained largely unchanged. By integrating upstream and downstream process development, product purification issues are given consideration during the optimization of upstream operating conditions, which mitigates the need for extensive and expensive clearance strategies downstream. To investigate the impact of cell culture duration on critical quality attributes, CHO-expressed IgG1 was cultivated in two 2 L bioreactors with samples taken on days 8, 10, 13, 15, and 17. The material was centrifuged, filtered and protein A purified on a 1 ml HiTrap column. Host cell protein (HCP) identification by mass spectrometry (MS) was applied to this system to provide insights into cellular behavior and HCP carryover during protein A purification. It was shown that as cultivation progressed from day 8 to 17 and antibody titer increased, product quality declined due to an increase in post-protein A HCPs (from 72 to 475 peptides detected by MS) and a decrease in product monomer percentage (from 98% to 95.5%). Additionally, the MS data revealed an increase in the abundance of several classes of post-protein A HCPs (e.g., stress response proteins and indicators of cell age), particularly on days 15 and 17 of culture, which were associated with significant increases in total overall HCP levels. This provides new insight into the specific types of HCPs that are retained during mAb purification and may be used to aid process development strategies.     

Relative quantification of serum proteins from pancreatic ductal adenocarcinoma patients by stable isotope dilution liquid chromatography-mass spectrometry

We report an innovative multiplexed liquidchromatography-multiple reaction monitoring/mass spectrometry (LC-MRM/MS)-based assay for rapidly measuring a large number of disease specific protein biomarkers in human serum. Furthermore, this approach uses stable isotope dilution methodology to reliably quantify candidate protein biomarkers. Human serum was diluted using a stable isotope labeled proteome (SILAP) standard prepared from the secretome of pancreatic cell lines, subjected to immunoaffinity removal of the most highly abundant proteins, trypsin digested, and analyzed by LC-MRM/MS. The method was found to be precise, linear, and specific for the relative quantification of 72 proteins when analyte response was normalized to the relevant internal standard (IS) from the SILAP. The method made it possible to determine statistically different concentrations for three proteins (cystatin M, IGF binding protein 7, and villin 2) in control and pancreatic cancer patient samples. This method proves the feasibility of using a SILAP standard in combination with stable isotope dilution LC-MRM/MS analysis of tryptic peptides to compare changes in the concentration of candidate protein biomarkers in human serum.     

Separation of product associating E. coli host cell proteins OppA and DppA from recombinant apolipoprotein A‐IMilano in an industrial HIC unit operation

We have shown how product associating E. coli host cell proteins (HCPs) OppA and DppA can be substantially separated from apolipoprotein A‐I_Milano (apo A‐I_M) using Butyl Sepharose hydrophobic interaction chromatography (HIC). This work illustrates the complex problems that frequently arise during development and scale‐up of biopharmaceutical manufacturing processes. Product association of the HCPs is confirmed using co‐immunoprecipitation and Western blotting techniques. Two‐dimensional gel electrophoresis and mass spectrometry techniques are used to confirm the identity of OppA and DppA. In this example, clearance of these difficult to separate HCPs decreased significantly when the process was scaled to a 1.4 m diameter column. Laboratory‐scale experimentation and trouble shooting identified several key parameters that could be further optimized to improve HCP clearance. The key parameters included resin loading, peak cut point on the ascending side, wash volume, and wash salt concentration. By implementing all of the process improvements that were identified, it was possible to obtain adequate HCP clearance so as to meet the final specification. Although it remains speculative, it is believed that viscosity effects may have contributed to the lower HCP clearance observed early in the manufacturing campaign. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Mass spectrometric evaluation of upstream and downstream process influences on host cell protein patterns in biopharmaceutical products

For production of different monoclonal antibodies (mAbs), biopharmaceutical companies often use related upstream and downstream manufacturing processes. Such platforms are typically characterized regarding influence of upstream and downstream process (DSP) parameters on critical quality attributes (CQAs). CQAs must be monitored strictly by an adequate control strategy. One such process-related CQA is the content of host cell protein (HCP) which is typically analyzed by immunoassay methods (e.g., HCP-ELISA). The capacity of the immunoassay to detect a broad range of HCPs, relevant for the individual mAb-production process should be proven by orthogonal proteomic methods such as 2D gel electrophoresis or mass spectrometry (MS). In particular MS has become a valuable tool to identify and quantify HCP in complex mixtures. We evaluate up- and DSP parameters of four different biopharmaceutical products, two different process variants, and one mock fermentation on the HCP pattern by shotgun MS analysis and ELISA. We obtained a similar HCP pattern in different cell culture fluid harvests compared to the starting material from the downstream process. During the downstream purification process of the mAbs, the HCP level and the number of HCP species significantly decreased, accompanied by an increase in diversity of the residual HCP pattern. Based on this knowledge, we suggest a control strategy that combines multi product ELISA for in-process control and release analytics, and MS testing for orthogonal HCP characterization, to attain knowledge on the HCP level, clusters and species. This combination supports a control strategy for HCPs addressing safety and efficacy of biopharmaceutical products.     

Identification and quantification of host cell protein impurities in biotherapeutics using mass spectrometry

Residual host cell proteins (HCPs) in biotherapeutics can present potential safety risks to patients or compromise product stability. As such, their levels are typically monitored using a multicomponent HCP enzyme-linked immunosorbent assay (ELISA) to ensure adequate removal. However, it is not possible to guarantee ELISA coverage of every possible HCP impurity, and the specific HCPs remaining following purification are rarely identified. In the current study, we characterized the ability of an advanced two-dimensional liquid chromatography/mass spectrometry platform (2D-LC/MS(E)) to identify and quantify known low-level spiked protein impurities in a therapeutic peptide Fc fusion protein. The label-free quantification procedure based on the "top 3" intensity tryptic peptides per protein was applied and improved on for this application. Limits of detection for unknown HCPs were approximated from the spiked protein data along with estimates for the quantitative accuracy of the method. In all, we established that most protein impurities present at 13±4ppm can be identified with a quantitative error of less than 2-fold using the more sensitive of two tested method formats. To conclude the study, we characterized all detectable Escherichia coli proteins present in this Fc fusion protein drug substance and discuss future applications of the method.     

Profiling of host cell proteins by two‐dimensional difference gel electrophoresis (2D‐DIGE): Implications for downstream process development

Host cell proteins (HCPs) constitute a major group of impurities for biologic drugs produced using cell culture technology. HCPs are required to be closely monitored and adequately removed in the downstream process. However, HCPs are a complex mixture of proteins with significantly diverse molecular and immunological properties. An overall understanding of the composition of HCPs and changes in their molecular properties upon changes in upstream and harvest process conditions can greatly facilitate downstream process design. This article describes the use of a comparative proteomic profiling method viz. two‐dimensional difference gel electrophoresis (2D‐DIGE) to examine HCP composition in the harvest stream of CHO cell culture. The effect of upstream process parameters such as cell culture media, bioreactor control strategy, feeding strategy, and cell culture duration/cell viability on HCP profile was examined using this technique. Among all the parameters studied, cell viability generated the most significant changes on the HCP profile. 2D‐DIGE was also used to compare the HCP differences between monoclonal antibody producing and null cell cultures. The HCP species in production cell culture was found to be well represented in null cell culture, which confirms the suitability of using the null cell culture for immunoassay reagent generation. 2D‐DIGE is complimentary to the commonly used HCP immunoassay. It provides a direct comparison of the changes in HCP composition under different conditions and can reveal properties (pI, MW) of individual species, whereas the immunoassay sensitively quantifies total HCP amount in a given sample. Biotechnol. Bioeng. 2010; 105: 306–316. © 2009 Wiley Periodicals, Inc.