A novel proteinaceous photolinker for simultaneous binding to an inert surface and a biomolecule

A simple and versatile method is developed for covalently binding a protein ligand onto a matrix irrespective of functional groups either on the ligand or the matrix. Prerequisite of the method is a novel proteinaceous photolinker having multiple light-activable functional groups. We have made photoreactive-BSA – a proteinaceous photolinker by the reaction of bovine serum albumin (BSA) with excess of 1-fluoro-2-nitro-4-azidobenzene (FNAB). When an enzyme is placed on an inert polystyrene matrix in presence of photoreactive-BSA and exposed to light the later forms highly reactive nitrenes some of which bind to the matrix and the rest to the ligand resulting simultaneous formation of covalent bonds with the matrix and the enzyme. The method is further exemplified by performing ELISA by covalent binding of antigen or antibody on a polystyrene microtiter plate in just 30 min using photoreactive-BSA. ELISA carried out in less than 3 h using photoreactive-BSA showed comparable results with that of conventional ELISA carried out in 18 h. Thus the method is potentially useful for rapid ELISA or covalent immobilization of ligands onto an inert surface without prior activation.     

Pentamer is the minimum structure for oligomannosylpeptoids to bind to concanavalin A

Enzyme-linked lectin assay (ELLA) was performed for oligomannosylpeptoids, which were immobilized on microtiter plates through a streptavidin-biotin interaction. The other immobilization methods, a hydrophobic adsorption and a covalent attachment, were found inapplicable to the oligomannosylpeptoids. Penta- and hexamannosylpeptoids with a shorter or longer spacer were found to be significantly recognized by concanavalinA (ConA), while the smaller peptoids showed no bindings. A proportional relationship between the amount of bound ConA and the peptoid density on the microtiter plate was observed, indicating the absence of both cluster and overdense effects that would assist or inhibit the binding increasingly with the ligand density.     

A novel proteinaceous photolinker for simultaneous binding to an inert surface and a biomolecule

A simple and versatile method is developed for covalently binding a protein ligand onto a matrix irrespective of functional groups either on the ligand or the matrix. Prerequisite of the method is a novel proteinaceous photolinker having multiple light-activable functional groups. We have made photoreactive-BSA – a proteinaceous photolinker by the reaction of bovine serum albumin (BSA) with excess of 1-fluoro-2-nitro-4-azidobenzene (FNAB). When an enzyme is placed on an inert polystyrene matrix in presence of photoreactive-BSA and exposed to light the later forms highly reactive nitrenes some of which bind to the matrix and the rest to the ligand resulting simultaneous formation of covalent bonds with the matrix and the enzyme. The method is further exemplified by performing ELISA by covalent binding of antigen or antibody on a polystyrene microtiter plate in just 30 min using photoreactive-BSA. ELISA carried out in less than 3 h using photoreactive-BSA showed comparable results with that of conventional ELISA carried out in 18 h. Thus the method is potentially useful for rapid ELISA or covalent immobilization of ligands onto an inert surface without prior activation.     

Surface immobilization chemistry influences peptide‐based detection of lipopolysaccharide and lipoteichoic acid

Antimicrobial peptides (AMPs) have recently gained attention as potentially valuable diagnostic and therapeutic agents. The utilization of these peptides for diagnostic purposes relies on the ability to immobilize them on the surface of a detection platform in a predictable and reliable manner that facilitates target binding. The method for attachment of peptides to a solid support is guided by peptide length, amino acid composition, secondary structure, and the nature of the underlying substrate. While immobilization methods that target amine groups of amino acid sequences are widely used, they can result in heterogeneous conjugation at multiple sites on a peptide and have direct implications for peptide presentation and function. Using two types of commercial amine‐reactive microtiter plates, we described the effects of analogous immobilization chemistries on the surface attachment of AMPs and their differential binding interaction with Gram‐specific bacterial biomarkers, lipopolysaccharide and lipoteichoic acid. As might be expected, differences in overall binding affinities were noted when comparing AMPs immobilized on the two types of plates. However, the two‐amine‐targeted linking chemistries also affected the specificity of the attached peptides; lipopolysaccharide generally demonstrated a preference for peptides immobilized on one type of plate, while (when observed at all) lipoteichoic acid bound preferentially to AMPs immobilized on the other type of plate. These results demonstrate the potential for tuning not only the binding affinities but also the specificities of immobilized AMPs by simple alterations in linking strategy. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.     

Endo‐lysosomal sorting of G‐protein‐coupled receptors by ubiquitin: Diverse pathways for G‐protein‐coupled receptor destruction and beyond

Ubiquitin is covalently attached to substrate proteins in the form of a single ubiquitin moiety or polyubiquitin chains and has been generally linked to protein degradation, however, distinct types of ubiquitin linkages are also used to control other critical cellular processes like cell signaling. Over forty mammalian G protein‐coupled receptors (GPCRs) have been reported to be ubiquitinated, but despite the diverse and rich complexity of GPCR signaling, ubiquitin has been largely ascribed to receptor degradation. Indeed, GPCR ubiquitination targets the receptors for degradation by lysosome, which is mediated by the Endosomal Sorting Complexes Required for Transport (ESCRT) machinery, and the proteasome. This has led to the view that ubiquitin and ESCRTs primarily function as the signal to target GPCRs for destruction. Contrary to this conventional view, studies indicate that ubiquitination of certain GPCRs and canonical ubiquitin‐binding ESCRTs are not required for receptor degradation and revealed that diverse and complex pathways exist to regulate endo‐lysosomal sorting of GPCRs. In other studies, GPCR ubiquitination has been shown to drive signaling and not receptor degradation and further revealed novel insight into the mechanisms by which GPCRs trigger the activity of the ubiquitination machinery. Here, we discuss the diverse pathways by which ubiquitin controls GPCR endo‐lysosomal sorting and beyond.      

Development of nonradioactive microtiter plate assays for nuclease activity

We have developed two microtiter plate assays for the detection of DNA cleavage by nucleases, using 3'-biotinylated oligonucleotide substrates. In the covalently linked oligonucleotide nuclease assay (CLONA), the biotinylated substrates are phosphorylated at the 5' end to facilitate their covalent immobilization on CovaLink NH plates. The cleavage of the covalently immobilized substrate by nucleases results in biotin release. The uncleaved substrate molecules are detected with an enzyme-avidin conjugate. The affinity-linked oligonucleotide nuclease assay (ALONA) makes use of substrates with a digoxigenin on the 5' end of the 3'-biotinylated DNA strand. The substrate binds specifically to the wells of streptavidin-coated microtiter plates, in which the nuclease reaction takes place. Uncleaved substrate retains the digoxigenin label, which is detected with an enzyme-labeled anti-digoxigenin antibody. We assessed the efficiency of these two assays by measuring S1 nuclease and DNase I activities, and the inhibitory effect of EDTA and aurintricarboxylic acid on the reaction. Both methods are more convenient than the standard radioactive nuclease assay and are suitable for high-throughput screening of potential nuclease inhibitors, nucleases, and catalytic antibodies. The ALONA assay was found to be more sensitive than the CLONA assay, with a performance similar to that of the standard nuclease assay.     

Prokaryotic expression and antimicrobial mechanism of XPF‐St7‐derived α‐helical peptides

XPF‐St7 (GLLSNVAGLLKQFAKGGVNAVLNPK) is an antimicrobial peptide isolated from Silurana tropicalis. We developed an α‐helical segment of XPF‐St7 termed as XPF2. Using the XPF2 as a framework, we increased the positive net charge of XPF2 by amino acid substitutions, and thus obtained two novel antimicrobial peptides XPF4 and XPF6. These were each fused with an ubiquitin tag and successfully expressed in Escherichia coli. This ubiquitin fusion system may present a viable alternative for industrial production of antimicrobial peptides. XPF4 and XPF6 showed much better overall antimicrobial activity against both Gram‐negative and Gram‐positive bacteria than XPF2. The therapeutic index of XPF4 and XPF6 was 5.6‐fold and 6.7‐fold of XPF2, respectively. Bacterial cell membrane permeabilization and genomic DNA interaction assays were utilized to explore the mechanism of action of XPF serial peptides. The results revealed that the target of these antimicrobial peptides was the bacterial cytoplasmic membrane. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Sequences of stilboflavin C: towards the peptaibiome of the filamentous fungus Stilbella (= Trichoderma) flavipes

Filamentous fungi of the genus Stilbella are recognized as an abundant source of naturally occurring α‐aminoisobutyric acid‐containing peptides. The culture broth of Stilbella (Trichoderma) flavipes CBS 146.81 yielded a mixture of peptides named stilboflavins (SF), and these were isolated and separated by preparative TLC into groups named SF‐A, SF‐B, and SF‐C. Although all three of these groups resolved as single spots on thin‐layer chromatograms, HPLC analysis revealed that each of the groups represents very microheterogeneous mixtures of closely related peptides. Here, we report on the sequence analysis of SF‐C peptides, formerly isolated by preparative TLC. HPLC coupled to QqTOF‐ESI‐HRMS provided the sequences of 10 16‐residue peptides and five 19‐residue peptides, all of which were N‐terminally acetylated. In contrast to the previously described SF‐A and SF‐B peptaibols, SF‐C peptaibols contain Ser‐Alaol or Ser‐Leuol, which are rarely found as C‐termini, and repetitive Leu‐Aib‐Gly sequences, which have not been detected in peptaibols before. Taking the previously determined sequences of SF‐A and SF‐B into account, the entirety of peptides produced by S. flavipes (the ‘peptaibiome’) approaches or exceeds 100 non‐ribosomally biosynthesized peptaibiotics. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Linear polyubiquitination: a new regulator of NF‐κB activation

The ubiquitin‐conjugation system regulates a vast range of biological phenomena by affecting protein function mostly through polyubiquitin conjugation. The type of polyubiquitin chain that is generated seems to determine how conjugated proteins are regulated, as they are recognized specifically by proteins that contain chain‐specific ubiquitin‐binding motifs. An enzyme complex that catalyses the formation of newly described linear polyubiquitin chains—known as linear ubiquitin chain‐assembly complex (LUBAC)—has recently been characterized, as has a particular ubiquitin‐binding domain that specifically recognizes linear chains. Both have been shown to have crucial roles in the canonical nuclear factor‐κB (NF‐κB)‐activation pathway. The ubiquitin system is intimately involved in regulating the NF‐κB pathway, and the regulatory roles of K63‐linked chains have been studied extensively. However, the role of linear chains in this process is only now emerging. This article discusses the possible mechanisms underlying linear polyubiquitin‐mediated activation of NF‐κB, and the different roles that K63‐linked and linear chains have in NF‐κB activation. Future directions for linear polyubiquitin research are also discussed.     

Designed synthetic analogs of the α‐helical peptide temporin‐La with improved antitumor efficacies via charge modification and incorporation of the integrin αvβ3 homing domain

How to target cancer cells with high specificity and kill cancer cells with high efficiency remains an urgent demand for anticancer drugs. Temporin‐La, which belongs to the family of temporins, presents antitumor activity against many cancer cell lines. We first used a whole bioinformatic analysis method as a platform to identify new anticancer antimicrobial peptides (AMPs). On the basis of these results, we designed a temporin‐La analog (temporin‐Las) and related constructs containing the Arg‐Gly‐Asp (RGD) tripeptide, the integrin αvβ3 homing domain (RGD‐La and RGD‐Las). We detected a link between the net charges and integrin αvβ3 expression of cancer cell lines and the antitumor activities of these peptides. Temporin‐La and its synthetic analogs inhibited cancer cell proliferation in a dose‐dependent manner. Evidence was provided that the affinity between RGD‐Las and tumor cell membranes was stronger than other tested peptides using a pull‐down assay. Morphological changes on the cell membrane induced by temporin‐La and RDG‐Las, respectively, were examined by scanning electron microscopy. Additionally, time‐dependent morphological changes were detected by confocal microscopy, where the binding process of RGD‐Las to the cell membrane could be monitored. The results indicate that the electrostatic interaction between these cationic peptides and the anionic cell membrane is a major determinant of selective cell killing. Thus, the RGD tripeptide is a valuable ligand motif for tumor targeting, which leads to an increased anticancer efficiency by RGD‐Las. These AMP‐derived peptides have clinical potential as specifically targeting agents for the treatment of αvβ3 positive tumors. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Immobilization of small molecules and proteins by radio-derivatized polystyrene

When molded polystyrene (PS) products (e.g., microtiter plates) or latex particles are irradiated with high-energy (1-10 Mrads) gamma rays in the presence of nonpolymerizable small molecules such as aromatic amines, some of these molecules incorporate into PS, which leads to the formation of radio-derivatized PS (RDPS). Two classes of RDPS can be identified regarding their ability for immobilization of biologically important molecules: 1) reactive RDPS that are able to form covalent bonds with molecules such as proteins without the help of cross-linkers, and 2) functionalized RDPS that can be used for the immobilization of molecules with activators (e.g., carbodiimides) or cross-linkers. The method can be used for the production of low-noise supports for binding assays. Most of the RDPS can be produced without impairment of the optical quality of PS, making derivatized microtiter plates suitable for colorimetric assays. The principle can be applied for the preparation of affinity sorbents, e.g., for high-performance affinity chromatography and for the immobilization of enzymes using latex PS particles.     

An automated multiplex specific IgE assay system using a photoimmobilized microarray

An automated microarray diagnostic system for specific IgE using photoimmobilized allergen has been developed. Photoimmobilization is useful for preparing microarrays, where various types of biological components are covalently immobilized on a plate. Because the immobilization is based on a photo-induced radical cross-linking reaction, it does not require specific functional groups on the immobilized components. Here, an aqueous solution of a photoreactive poly(ethylene glycol)-based polymer was spin-coated on a plate, and an aqueous solution of each allergen was microspotted on the coated plate and allowed to dry in air. Finally, the plate was irradiated with an ultraviolet lamp for covalent immobilization. An automated machine using these plates was developed for the assay of antigen-specific IgE. Initially, the patient serum was added to the microarray plate, and after reaction of the microspotted allergen with IgE, the adsorbed IgE was detected by a peroxidase-conjugated anti-IgE-antibody. The chemical luminescence intensity of the substrate decomposed by the peroxidase was automatically detected using a sensitive charge-coupled device camera. All the allergens were immobilized stably using this method, which was used to screen for allergen-specific IgE. The results were comparable with those using conventional specific IgE. Using this system, six different allergen-specific IgE were assayed using 10μL of serum within a period of 20min.     

Characterization of the complex formed between a potent neutralizing ovine-derived polyclonal anti-TNFα Fab fragment and human TNFα

TNFα (tumour necrosis factor α) is an early mediator in the systemic inflammatory response to infection and is therefore a therapeutic target in sepsis. AZD9773 is an ovine-derived, polyclonal anti-TNFα Fab fragment derived from a pool of serum and currently being developed as a treatment for severe sepsis and septic shock. In the present study, we show that although AZD9773 has a modest affinity for TNFα in a binding assay, the K_i in a cell-based assay is approximately four orders of magnitude lower. We show using SEC (size exclusion chromatography) that the maximum size of the complex between AZD9773 and TNFα is consistent with approximately 12 Fabs binding to one TNFα trimer. A number of approaches were taken to map the epitopes recognized by AZD9773. These revealed that a number of different regions on TNFα are involved in binding to the polyclonal Fab. The data suggest that there are probably three epitopes per monomer that are responsible for most of the inhibition by AZD9773 and that all three can be occupied at the same time in the complex. We conclude that AZD9773 is clearly demonstrated to bind to multiple epitopes on TNFα and suggest that the polyclonal nature may account, at least in part, for the very high potency observed in cell-based assays.     

Coupling of membrane-bound and detergent-solubilized sodium- and potassium-activated ATPase to p-benzoquinone-treated microtiter plates

Membrane-bound and dodecyloctaoxyethyleneglycol monoether-solubilized Na,K-ATPases from pig kidney were covalently attached to microtiter plate wells pretreated with p-benzoquinone (plus collodion for some plates). The immobilized enzymes were detected with the mouse monoclonal antibody (named 38) specific to Na,K-ATPase and a perioxidase-conjugated rabbit IgG anti-mouse IgG. When the two Na,K-ATPase preparations were applied to each well at the same protein concentration, the color intensity of the peroxidase reaction for determination of antibody was two to three times stronger with the solubilized enzyme than with the membrane-bound enzyme. Similar titer values were obtained from the graphical analysis of titration curves of both enzymes. Red cell membrane proteins as well as Na,K-ATPase were covalently attached to the plastic. p-Benzoquinone should be generally useful for coupling membrane proteins, even in detergent solutions, to microtiter plate wells.     

A TLC bioautographic method for the detection of α‐ and β‐glucosidase inhibitors in plant extracts

Introduction – Bioautographic assays using TLC play an important role in the search for active compounds from plants. A TLC assay has previously been established for the detection of β‐glucosidase inhibitors but not for α‐glucosidase. Nonetheless, α‐glucosidase inhibition is an important target for therapeutic agents against of type 2 diabetes and anti‐viral infections. Objective – To develop a TLC bioautographic method to detect α‐ and β‐glucosidase inhibitors in plant extracts. Methodology – The enzymes α‐ and β‐d ‐glucosidase were dissolved in sodium acetate buffer. After migration of the samples, the TLC plate was sprayed with enzyme solution and incubated at room temperature for 60 min in the case of α‐d ‐glucosidase, and 37°C for 20 min in the case of β‐d ‐glucosidase. For detection of the active enzyme, solutions of 2‐naphthyl‐α‐D‐glucopyranoside or 2‐naphthyl‐β‐D‐glucopyranoside and Fast Blue Salt were mixed at a ratio of 1 : 1 (for α‐d ‐glucosidase) or 1 : 4 (for β‐d ‐glucosidase) and sprayed onto the plate to give a purple background colouration after 2–5 min. Results – Enzyme inhibitors were visualised as white spots on the TLC plates. Conduritol B epoxide inhibited α‐d ‐glucosidase and β‐d ‐glucosidase down to 0.1 µg. Methanol extracts of Tussilago farfara and Urtica dioica after migration on TLC gave enzymatic inhibition when applied in amounts of 100 µg for α‐glucosidase and 50 µg for β‐glucosidase. Conclusion – The screening test was able to detect inhibition of α‐ and β‐glucosidases by pure reference substances and by compounds present in complex matrices, such as plant extracts. Copyright © 2009 John Wiley & Sons, Ltd.     

Chitosan scaffolds for biomolecular assembly: coupling nucleic acid probes for detecting hybridization

Chitosan, a naturally occurring biopolymer, was used as a scaffold for the covalent binding of single-stranded DNA oligonucleotide probes in a fluorescence-based nucleic acid hybridization assay. Chitosan's pH dependent chemical and electrostatic properties enable its deposition on electrodes and metal surfaces, as well as on the bottom of microtiter plates. A combinatorial 96-well microtiter plate format was used to optimize chemistries and reaction conditions leading to hybridization experiments. We found the coupling of oligonucleotides using relatively common glutaraldehyde chemistry was quite robust. Our hybridization results for complementary ssDNA oligonucleotides (E. coli dnaK sequences) demonstrated linear fluorescence intensity with concentration of E. coli dnaK-specific oligonucleotide from 0.73 microM to 6.6 microM. Moreover, hybridization assays were specific as there was minimal fluorescence associated with noncomplementary groEL oligonucleotide. Finally, these results demonstrate the portability of a DNA hybridization assay based on covalent coupling to chitosan, which, in turn, can be deposited onto various surfaces. More arduous surface preparation techniques involving silanizing agents and hazardous washing reagents are eliminated using this technique.     

Molecular discrimination of structurally equivalent Lys 63‐linked and linear polyubiquitin chains

At least eight types of ubiquitin chain exist, and individual linkages affect distinct cellular processes. The only distinguishing feature of differently linked ubiquitin chains is their structure, as polymers of the same unit are chemically identical. Here, we have crystallized Lys 63‐linked and linear ubiquitin dimers, revealing that both adopt equivalent open conformations, forming no contacts between ubiquitin molecules and thereby differing significantly from Lys 48‐linked ubiquitin chains. We also examined the specificity of various deubiquitinases (DUBs) and ubiquitin‐binding domains (UBDs). All analysed DUBs, except CYLD, cleave linear chains less efficiently compared with other chain types, or not at all. Likewise, UBDs can show chain specificity, and are able to select distinct linkages from a ubiquitin chain mixture. We found that the UBAN (ubiquitin binding in ABIN and NEMO) motif of NEMO (NF‐κB essential modifier) binds to linear chains exclusively, whereas the NZF (Npl4 zinc finger) domain of TAB2 (TAK1 binding protein 2) is Lys 63 specific. Our results highlight remarkable specificity determinants within the ubiquitin system.     

An immunoinformatics approach to define T cell epitopes from polyketide and non‐ribosomal peptide synthesis proteins of Mycobacterium tuberculosis as potential vaccine candidates

The role of polyketide and non‐ribosomal proteins from the class of small molecule metabolism of Mycobacterium tuberculosis is well documented in envelope organization, virulence, and pathogenesis. Consequently, the identification of T cell epitopes from these proteins could serve to define potential antigens for the development of vaccines. Fourty‐one proteins from polyketide and non‐ribosomal peptide synthesis of small molecule metabolism proteins of M tuberculosis H37Rv were analyzed computationally for the presence of HLA class I binding nanomeric peptides. All possible overlapping nanomeric peptide sequences from 41 small molecule metabolic proteins were generated through in silico and analyzed for their ability to bind to 33 alleles belonging to A, B, and C loci of HLA class I molecule. Polyketide and non‐ribosomal protein analyses revealed that 20% of generated peptides were predicted to bind HLA with halftime of dissociation T_1/2 ≥ 100 minutes, and 77% of them were mono‐allelic in their binding. The structural bases for recognition of nanomers by different HLA molecules were studied by structural modeling of HLA class I‐peptide complexes. Pathogen peptides that could mimic as self‐peptides or partially self‐peptides in the host were excluded using a comparative study with the human proteome; thus, subunit or DNA vaccines will have more chance of success.