Solid-phase route to Fmoc-protected cationic amino acid building blocks

Diamino acids are commonly found in bioactive compounds, yet only few are commercially available as building blocks for solid-phase peptide synthesis. In the present work a convenient, inexpensive route to multiple-charged amino acid building blocks with varying degree of hydrophobicity was developed. A versatile solid-phase protocol leading to selectively protected amino alcohol intermediates was followed by oxidation to yield the desired di- or polycationic amino acid building blocks in gram-scale amounts. The synthetic sequence comprises loading of (S)-1-(p-nosyl)aziridine-2-methanol onto a freshly prepared trityl bromide resin, followed by ring opening with an appropriate primary amine, on-resin N(β)-Boc protection of the resulting secondary amine, exchange of the N(α)-protecting group, cleavage from the resin, and finally oxidation in solution to yield the target γ-aza substituted building blocks having an Fmoc/Boc protection scheme. This strategy facilitates incorporation of multiple positive charges into the building blocks provided that the corresponding partially protected di- or polyamines are available. An array of compounds covering a wide variety of γ-aza substituted analogs of simple neutral amino acids as well as analogs displaying high bulkiness or polycationic side chains was prepared. Two building blocks were incorporated into peptide sequences using microwave-assisted solid-phase peptide synthesis confirming their general utility.     

Cloning and characterization of two rhamnogalacturonan hydrolase genes from Aspergillus niger.

A rhamnogalacturonan hydrolase gene of Aspergillus aculeatus was used as a probe for the cloning of two rhamnogalacturonan hydrolase genes of Aspergillus niger. The corresponding proteins, rhamnogalacturonan hydrolases A and B, are 78 and 72% identical, respectively, with the A. aculeatus enzyme. In A. niger cultures which were shifted from growth on sucrose to growth on apple pectin as a carbon source, the expression of the rhamnogalacturonan hydrolase A gene (rhgA) was transiently induced after 3 h of growth on apple pectin. The rhamnogalacturonan hydrolase B gene was not induced by apple pectin, but the rhgB gene was derepressed after 18 h of growth on either apple pectin or sucrose. Gene fusions of the A. niger rhgA and rhgB coding regions with the strong and inducible Aspergillus awamori exlA promoter were used to obtain high-producing A. awamori transformants which were then used for the purification of the two A. niger rhamnogalacturonan hydrolases. High-performance anion-exchange chromatography of oligomeric degradation products showed that optimal degradation of an isolated highly branched pectin fraction by A. niger rhamnogalacturonan hydrolases A and B occurred at pH 3.6 and 4.1, respectively. The specific activities of rhamnogalacturonan hydrolases A and B were then 0.9 and 0.4 U/mg, respectively, which is significantly lower than the specific activity of A. aculeatus rhamnogalacturonan hydrolase (2.5 U/mg at an optimal pH of 4.5). Compared to the A enzymes, the A. niger B enzyme appears to have a different substrate specificity, since additional oligomers are formed.     

Iodine-mediated glycosylation en route to mucin-related glyco-aminoacids and glycopeptides

The use of iodine-DDQ as a promoter for glycosylation of Fmoc-Ser-OBn and Fmoc-Thr-OBn with phenylseleno 3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranoside in toluene-dioxane gave 49% and 73% yields, respectively, of the corresponding alpha-glycosides as the sole glycoside products. Reductive acetylation of the azide groups and cleavage of the benzyl esters by hydrogenolysis gave building blocks that were used in solid-phase synthesis to prepare triglycosylated tetrapeptides (Ac(3)GalNAc-alpha-Ser)(3)-Gly and (Ac(3)GalNAc-alpha-Thr)(3)-Gly in 27% and 49% overall yield, respectively.     

Synthesis and alkylation of aza‐glycinyl dipeptide building blocks

Aza‐glycinyl dipeptides are useful building blocks for the synthesis of a diverse array of azapeptides. The construction of the aza‐glycine residue is however challenging, because of the potential for side reactions, such as those leading to formation of oxadiazalone, hydantoin and symmetric urea by‐products. Employing N,N′‐disuccinimidyl carbonate to activate benzophenone hydrazone, we have developed a more efficient approach for the synthesis of aza‐glycinyl dipeptides. Alkylation of the semicarbazone of the resulting protected aza‐glycinyl dipeptides using tetraethylammonium hydroxide and propargyl bromide provided an efficient entry into the aza‐propargylglycinyl peptide building blocks, which have served previously in various reactions including Sonogashira cross‐couplings, dipolar cycloadditions and intramolecular exo‐dig cycloadditions to furnish a variety of azapeptide building blocks. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Structural features of the neutral sugar side chains of apple pectic substances

The ‘hairy regions’ of apple pectic substances (fragments of the rhamnogalacturonan chains carrying the neutral sugar side chains) have been subjected to enzymic, acidic and alkaline degradation. The results show that the hairy regions consist of rhamnogalacturonan fragments carrying arabinogalactans and galacturonan fragments carrying single unit xylose side chains. A separate population of molecules is present consisting of galacturonan main chains and side chains of 1,3/1,6-linked galactans. The structural relations of pectic substances from different plant species are discussed.     

Hierarchical protein folding pathways: a computational study of protein fragments

We have previously presented a building block folding model. The model postulates that protein folding is a hierarchical top-down process. The basic unit from which a fold is constructed, referred to as a hydrophobic folding unit, is the outcome of combinatorial assembly of a set of "building blocks." Results obtained by the computational cutting procedure yield fragments that are in agreement with those obtained experimentally by limited proteolysis. Here we show that as expected, proteins from the same family give very similar building blocks. However, different proteins can also give building blocks that are similar in structure. In such cases the building blocks differ in sequence, stability, contacts with other building blocks, and in their 3D locations in the protein structure. This result, which we have repeatedly observed in many cases, leads us to conclude that while a building block is influenced by its environment, nevertheless, it can be viewed as a stand-alone unit. For small-sized building blocks existing in multiple conformations, interactions with sister building blocks in the protein will increase the population time of the native conformer. With this conclusion in hand, it is possible to develop an algorithm that predicts the building block assignment of a protein sequence whose structure is unknown. Toward this goal, we have created sequentially nonredundant databases of building block sequences. A protein sequence can be aligned against these, in order to be matched to a set of potential building blocks.     

Pharmacologic study of C-terminal fragments of frog skin calcitonin gene-related peptide

The calcitonin gene-related peptide from the skin of the frog Phyllomedusa bicolor (pbCGRP) is a 37-residue neuropeptide that differs from human alpha CGRP (halphaCGRP) at 16 positions. The affinities of the C-terminal fragments of pbCGRP and halphaCGRP were evaluated in SK-N-MC cells: pbCGRP(8-37) (K(i)=0.2nM) and pbCGRP(27-37) (K(i)=95nM) were, respectively, 3 times and 20 times more potent than the human fragments halphaCGRP(8-37) and halphaCGRP(27-37). Their antagonistic potencies were measured in SK-N-MC and Col 29 cells, and the rat vas deferens. pbCGRP(8-37) inhibited the halphaCGRP-stimulated production of cAMP by SK-N-MC and Col 29 cells 3 to 4 times more strongly than halphaCGRP(8-37). Thus pbCGRP(8-37) is the most potent CGRP-1 competitive antagonist of all the natural sequences reported to date. pbCGRP(27-37) was also as potent as [D(31), A(34), F(35)] halphaCGRP(27-37), a prototypic antagonist analog derived from structure-activity relationship studies of halphaCGRP(8-37).     

Isolation and structural characterization of a novel oligosaccharide from the rhamnogalacturonan of Gossypium hirsutum L

An alkali extract of cell walls of Gossypium hirsutum L. was sequentially digested by endo-polygalacturonase (EC 3.2.1.15), arabinofuranosidase AN1571.2 (EC 3.2.1.55), endo-arabinase (EC 3.2.1.99), and rhamnogalacturonan hydrolase AN9314.2 (EC 3.2.1.15). The rhamnogalacturonan hydrolase-generated oligosaccharides were separated by ultrafiltration, size-exclusion, and anion exchange chromatography. Fractions from the anion exchange chromatography were pooled, lyophilized, and screened by MALDI-TOFMS. A new oligosaccharide (RGS29), which contained a rhamnogalacturonan dimer backbone with two galactose and two arabinose residues in the side chains, was found. Its structure was identified by 1D and 2D NMR spectra as follows: [FORMULA: SEE TEXT].     

Characterization of the safener-induced glutathione S-transferase isoform II from maize

The safener-induced maize (Zea mays L.) glutathione S-transferase, GST II (EC 2.5.1.18) and another predominant isoform, GST I, were purified from extracts of maize roots treated with the safeners R-25788 (N,N-diallyl-2-dichloroacetamide) or R-29148 (3-dichloroace-tyl-2,2,5-trimethyl-1,3-oxazolidone). The isoforms GST I and GST II are respectively a homodimer of 29-kDa (GST-29) subunits and a heterodimer of 29 and 27-kDa (GST-27) subunits, while GST I is twice as active with 1-chloro-2,4-dinitrobenzene as GST II, GST II is about seven times more active against the herbicide, alachlor. Western blotting using antisera raised against GST-29 and GST-27 showed that GST-29 is present throughout the maize plant prior to safener treatment. In contrast, GST-27 is only present in roots of untreated plants but is induced in all the major aerial organs of maize after root-drenching with safener. The amino-acid sequences of proteolytic fragments of GST-27 show that it is related to GST-29 and identical to the 27-kDa subunit of GST IV.Abbreviations CDNB 1-chloro-2,4-dinitrobenzene - DEAE di-ethylaminoethyl - FPLC fast protein liquid chromatography - GSH reduced glutathione - GST glutathione S-transferase - GST-26 26-kDa subunit of maize GST - GST-27 27-kDa subunit of maize GST - GST-29 29-kDa subunit of maize GST - R-25788 safener N,N-diallyl-2-dichloroacetamide - R-29148 safener 3-dichloroacetyl-2,2,5-trimethyl-1,3-oxazolidone - RPLC reverse phase liquid chromatography We are grateful to M-M. Lay, ZENECA AG Products (formerly ICI Americas), Richmond, Calif., USA for providing [¹⁴C] R-25788. ZENECA Seeds in the UK is part of ZENECA Limited.     

Access to the inaccessible sequence of cpn 60.1 (195-217) by temporary oxazolidine protection of selected amide bonds

The solid-phase peptide synthesis of a reportedly inaccessible peptide sequence of chaperonin 60.1 (195-219) is described using oxazolidine containing dipeptide building blocks ('pseudo-proline' dipeptide units). Two attempts at the synthesis of the chaperonin 60.1 sequence are outlined using one and two pseudo-proline units, respectively, and these results are compared with the outcome of an ordinary stepwise (double) coupling procedure. The only successful synthesis is that combining two pseudo-proline building blocks.     

Use of RNA structure flexibility data in nanostructure modeling

In the emerging field of RNA-based nanotechnology there is a need for automation of the structure design process. Our goal is to develop computer methods for aiding in this process. Towards that end, we created the RNA junction database, which is a repository of RNA junctions, i.e. internal, multi-branch and kissing loops with emanating stem stubs, extracted from the larger RNA structures stored in the PDB database. These junctions can be used as building blocks for nanostructures. Two programs developed in our laboratory, NanoTiler and RNA2D3D, can combine such building blocks with idealized fragments of A-form helices to produce desired 3D nanostructures. Initially, the building blocks are treated as rigid objects and the resulting geometry is tested against the design objectives. Experimental data, however, shows that RNA accommodates its shape to the constraints of larger structural contexts. Therefore we are adding analysis of the flexibility of our building blocks to the full design process. Here we present an example of RNA-based nanostructure design, putting emphasis on the need to characterize the structural flexibility of the building blocks to induce ring closure in the automated exploration. We focus on the use of kissing loops (KL) in nanostructure design, since they have been shown to play an important role in RNA self-assembly. By using an experimentally proven system, the RNA tectosquare, we show that considering the flexibility of the KLs as well as distortions of helical regions may be necessary to achieve a realistic design.     

Synthesis of pyrrole-imidazole polyamide oligomers based on a copper-catalyzed cross-coupling strategy

Pyrrole-imidazole (Py-Im) polyamides are useful tools for chemical biology and medicinal chemistry studies due to their unique binding properties to the minor groove of DNA. We developed a novel method of synthesizing Py-Im polyamide oligomers based on a Cu-catalyzed cross-coupling strategy. All four patterns of dimer fragments could be synthesized using a Cu-catalyzed Ullmann-type cross-coupling with easily prepared monomer units. Moreover, we demonstrated that pyrrole dimer, trimer, and tetramer building blocks for Py-Im polyamide synthesis were accessible by combining site selective iodination of the pyrrole/pyrrole coupling adduct.     

In silico protein design by combinatorial assembly of protein building blocks

Utilizing concepts of protein building blocks, we propose a de novo computational algorithm that is similar to combinatorial shuffling experiments. Our goal is to engineer new naturally occurring folds with low homology to existing proteins. A selected protein is first partitioned into its building blocks based on their compactness, degree of isolation from the rest of the structure, and hydrophobicity. Next, the protein building blocks are substituted by fragments taken from other proteins with overall low sequence identity, but with a similar hydrophobic/hydrophilic pattern and a high structural similarity. These criteria ensure that the designed protein has a similar fold, low sequence identity, and a good hydrophobic core compared with its native counterpart. Here, we have selected two proteins for engineering, protein G B1 domain and ubiquitin. The two engineered proteins share approximately 20% and approximately 25% amino acid sequence identities with their native counterparts, respectively. The stabilities of the engineered proteins are tested by explicit water molecular dynamics simulations. The algorithm implements a strategy of designing a protein using relatively stable fragments, with a high population time. Here, we have selected the fragments by searching for local minima along the polypeptide chain using the protein building block model. Such an approach provides a new method for engineering new proteins with similar folds and low homology.     

Potential folding-function interrelationship in proteins

The possibility is addressed that protein folding and function may be related via regions that are critical for both folding and function. This approach is based on the building blocks folding model that describes protein folding as binding events of conformationally fluctuating building blocks. Within these, we identify building block fragments that are critical for achieving the native fold. A library of such critical building blocks (CBBs) is constructed. Then, it is asked whether the functionally important residues fall in these CBB fragments. We find that for over two-thirds of the proteins in our library with available functional information, the catalytic or binding site residues lie within the CBB regions. From the evolutionary standpoint, a folding-function relationship is advantageous, since the need to guard against mutations is limited to one region. Furthermore, conformationally similar CBBs are found in globally unrelated proteins with different functions. Hence, substituting CBBs may lead to designed proteins with altered functions. We further find that the CBBs in our library are conformationally unstable.     

Absolute configuration at C-24 of 5 beta-ranol, a principal bile alcohol of the bullfrog

The stereochemistry of the hydroxyl group at C-24 in 5 beta-ranol (27-nor-5 beta-cholestane-3 alpha,7 alpha,12 alpha,24,26-pentol) a principal bile alcohol of the bullfrog which is structurally related to the major human urinary bile alcohol, 27-nor-5 beta-cholestane-3 alpha,7 alpha,12 alpha,24,25-pentol, is described. Two isomers (IIIa and IIIb) at C-24 of 27-nor-5 beta-cholest-25-ene-3 alpha,7 alpha,12 alpha, 24-tetrol were synthesized from cholic acid (I) by the conversion to 3 alpha, 7 alpha, 12 alpha-triacetoxy-5 beta-cholan-24-al (II) followed by a Grignard reaction with vinylmagnesium bromide. The absolute configurations at C-24 of the unsaturated tetrols (IIIa and IIIb) were elucidated as S and R, respectively, by means of the difference of the reactivity to Sharpless oxidation, a stereoselective epoxidation. Catalytic hydrogenation of each delta 25-tetrol (IIIa or IIIb) gave (24R)- or (24S)-27-nor-5 beta-cholestane-3 alpha,7 alpha,12 alpha, 24-tetrol (IVa or IVb). The configurations at C-24 of two isomeric 3 alpha,7 alpha,12 alpha,24-tetrahydroxy-27-nor-5 beta-cholestan-26-oic acids (Va and Vb) were determined as S and R, respectively, by means of their conversion into the saturated tetrols (IVa and IVb) of known absolute configurations by a Kolbe electrolytic coupling with acetic acid. The lithium aluminum hydride reduction product of the 24R-acid (Vb) was identical with the naturally occurring 5 beta-ranol, hence 5 beta-ranol has the 24R configuration.     

Synthesis and biological evaluation of glycogen synthase kinase 3 (GSK-3) inhibitors: an fast and atom efficient access to 1-aryl-3-benzylureas

The glycogen synthase kinase 3 (GSK-3) is implicated in multiple cellular processes and has been linked to the pathogenesis of Alzheimer's disease (AD). In the course of our research topic we synthesized a library of potent GSK-3 inhibitors. We utilized the urea scaffold present in the potent and highly selective GSK-3 inhibitor AR-A014418 (AstraZeneca). This moiety suits both (a) a convergent approach utilizing readily accessible building blocks and (b) a divergent approach based on a microwave heating assisted Suzuki coupling. We established a chromatography-free purification method to generate products with sufficient purity for the biological assays. The structure-activity relationship of the library provided the rationale for the synthesis of the benzothiazolylurea 66 (IC(50)=140 nM) and the pyridylurea 62 (IC(50)=98 nM), which displayed two to threefold enhanced activity versus the reference compound 18 (AR-A014418: IC(50)=330 nM) in our assays.     

Covalent structure of protein C. A second major low molecular weight protein degraded during germination of Bacillus megaterium spores

The complete covalent structure of protein C, a protein degraded during germination of Bacillus megaterium spores, has been determined. The intact protein was cleaved with a highly specific spore protease into two peptides, residues 1 to 30 and 31 to 71. The intact protein was also cleaved by cyanogen bromide into two peptides, residues 1 to 27 and 28 to 71. Cleavage of the larger cyanogen bromide peptide with trypsin allowed isolation of the COOH-terminal peptide, residues 59 to 71. Automated sequenator analysis of the intact protein and peptide fragments, together with previously published partial sequence data on this protein and carboxypeptidase A digestion of the intact protein provided data from which the following unique sequence was deduced: (formula: see text). The primary sequence of the C protein shows an extremely high degree of homology with that of the A protein--another protein degraded during germination of B. megaterium spores.     

Rhamnogalacturonan acetylesterase elucidates the structure and function of a new family of hydrolases

BACKGROUND: The complex polysaccharide rhamnogalacturonan constitutes a major part of the hairy region of pectin. It can have different types of carbohydrate sidechains attached to the rhamnose residues in the backbone of alternating rhamnose and galacturonic acid residues; the galacturonic acid residues can be methylated or acetylated. Aspergillus aculeatus produces enzymes that are able to perform a synergistic degradation of rhamnogalacturonan. The deacetylation of the backbone by rhamnogalacturonan acetylesterase (RGAE) is an essential prerequisite for the subsequent action of the enzymes that cleave the glycosidic bonds. RESULTS: The structure of RGAE has been determined at 1.55 A resolution. RGAE folds into an alpha/beta/alpha structure. The active site of RGAE is an open cleft containing a serine-histidine-aspartic acid catalytic triad. The position of the three residues relative to the central parallel beta sheet and the lack of the nucleophilic elbow motif found in structures possessing the alpha/beta hydrolase fold show that RGAE does not belong to the alpha/beta hydrolase family. CONCLUSIONS: Structural and sequence comparisons have revealed that, despite very low sequence similarities, RGAE is related to seven other proteins. They are all members of a new hydrolase family, the SGNH-hydrolase family, which includes the carbohydrate esterase family 12 as a distinct subfamily. The SGNH-hydrolase family is characterised by having four conserved blocks of residues, each with one completely conserved residue; serine, glycine, asparagine and histidine, respectively. Each of the four residues plays a role in the catalytic function.     

Syntheses of T(N) building blocks Nalpha-(9-fluorenylmethoxycarbonyl)-O-(3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosyl)-L-serine/L-threonine pentafluorophenyl esters: comparison of protocols and elucidation of side reactions

T(N) antigen building blocks Nalpha-(9-fluorenylmethoxycarbonyl)-O-(3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosyl)-L-serine/L-threonine pentafluorophenyl ester [Fmoc-L-Ser/L-Thr(Ac3-alpha-D-GalN3)-OPfp, 13/14] have been synthesized by two different routes, which have been compared. Overall isolated yields [three or four chemical steps, and minimal intermediary purification steps] of enantiopure 13 and 14 were 5-18% and 6-10%, respectively, based on 3,4,6-tri-O-acetyl-D-galactal (1). A byproduct of the initial azidonitration reaction of the synthetic sequence, that is, N-acetyl-3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosylamine (5), has been characterized by X-ray crystallography, and shown by 1H NMR spectroscopy to form complexes with lithium bromide, lithium iodide, or sodium iodide in acetonitrile-d3. Intermediates 3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosyl bromide (6) and 3,4,6-tri-O-acetyl-2-azido-2-deoxy-beta-D-galactopyranosyl chloride (7) were used to glycosylate Nalpha-(9-fluorenylmethoxycarbonyl)-L-serine/L-threonine pentafluorophenyl esters [Fmoc-L-Ser/L-Thr-OPfp, 11/12]. Previously undescribed low-level dehydration side reactions were observed at this stage; the unwanted byproducts were easily removed by column chromatography.     

Phosphofructokinase: complete amino-acid sequence of the enzyme from Bacillus stearothermophilus

The entire amino acid sequence of the protein subunit of phosphofructokinase from Bacillus stearothermophilus has been established mainly by sequence analysis of cyanogen bromide fragments and of peptides derived from these fragments by further digestion with proteolytic enzymes. Overlaps of the cyanogen bromide fragments as well as peptide sequences necessary to complement and to confirm tentative assignments within the larger peptide fragments were obtained from the sequences of selected peptides isolated from tryptic and chymotryptic digests of the intact S-[14C]-carboxymethylated protein. Sequence information was also provided by automated sequence analysis of the intact protein subunit and of some of the larger peptide fragments. The sequence is as follows: (See Text).