Hollow NiCo2S4 Nanospheres Hybridized with 3D Hierarchical Porous rGO/Fe2O3 Composites toward High‐Performance Energy Storage Device

Hierarchical hollow NiCo₂S₄ microspheres with a tunable interior architecture are synthesized by a facile and cost‐effective hydrothermal method, and used as a cathode material. A three‐dimensional (3D) porous reduced graphene oxide/Fe₂O₃ composite (rGO/Fe₂O₃) with precisely controlled particle size and morphology is successfully prepared through a scalable facile approach, with well‐dispersed Fe₂O₃ nanoparticles decorating the surface of rGO sheets. The fixed Fe₂O₃ nanoparticles in graphene efficiently prevent the intermediates during the redox reaction from dissolving into the electrolyte, resulting in long cycle life. KOH activation of the rGO/Fe₂O₃ composite is conducted for the preparation of an activated carbon material–based hybrid to transform into a 3D porous carbon material–based hybrid. An energy storage device consisting of hollow NiCo₂S₄ microspheres as the positive electrode, the 3D porous rGO/Fe₂O₃ composite as the negative electrode, and KOH solution as the electrolyte with a maximum energy density of 61.7 W h kg^?1 is achieved owing to its wide operating voltage range of 0–1.75 V and the designed 3D structure. Moreover, the device exhibits a high power density of 22 kW kg^?1 and a long cycle life with 90% retention after 1000 cycles at the current density of 1 A g^?1.     

Inverted Design for High‐Performance Supercapacitor Via Co(OH)2‐Derived Highly Oriented MOF Electrodes

Metal organic frameworks (MOFs) are considered as promising candidates for supercapacitors because of high specific area and potential redox sites. However, their shuffled orientations and low conductivity nature lead to severely‐degraded performance. Designing an accessibly‐manipulated and efficient method to address those issues is of outmost significance for MOF application in supercapacitors. It is the common way that MOFs scarify themselves as templates or precursors to prepare target products. But to reversely think it, using target products to prepare MOF could be the way to unlock the bottleneck of MOFs' performance in supercapacitors. Herein, a novel strategy using Co(OH)₂ as both the template and precursor to fabricate vertically‐oriented MOF electrode is proposed. The electrode shows a double high specific capacitance of 1044 Fg^?1 and excellent rate capability compared to MOF in powder form. An asymmetric supercapacitor was also fabricated, which delivers a maximum energy density of 28.5 W h kg^?1 at a power density of 1500 W kg^?1, and the maximum of 24000 W kg^?1 can be obtained with a remaining energy density of 13.3 W h kg^?1. Therefore, the proposed strategy paves the way to unlock the inherent advantages of MOFs and also inspires for advanced MOF synthesis with optimum performance.     

Rational Construction of Self‐Standing Sulfur‐Doped Fe2O3 Anodes with Promoted Energy Storage Capability for Wearable Aqueous Rechargeable NiCo‐Fe Batteries

Aqueous rechargeable Ni‐Fe batteries featuring an ultra‐flat discharge plateau, low cost, and outstanding safety characteristics show promising prospects for application in wearable energy storage. In particular, fiber‐shaped Ni‐Fe batteries will enable textile‐based energy supply for wearable electronics. However, the development of fiber‐shaped Ni‐Fe batteries is currently challenged by the performance of fibrous Fe‐based anode materials. In this context, this study describes the fabrication of sulfur‐doped Fe₂O₃ nanowire arrays (S‐Fe₂O₃ NWAs) grown on carbon nanotube fibers (CNTFs) as an innovative anode material (S‐Fe₂O₃ NWAs/CNTF). Encouragingly, first‐principle calculations reveal that S‐doping in Fe₂O₃ can dramatically reduce the band gap from 2.34 to 1.18 eV and thus enhance electronic conductivity. The novel developed S‐Fe₂O₃ NWAs/CNTF electrode is further demonstrated to deliver a very high capacity of 0.81 mAh cm^?2 at 4 mA cm^?2. This value is almost sixfold higher than that of the pristine Fe₂O₃ NWAs/CNTF electrode. When a cathode containing zinc‐nickel‐cobalt oxide (ZNCO)@Ni(OH)₂ NWAs heterostructures is used, 0.46 mAh cm^?2 capacity and 67.32 mWh cm^?3 energy density are obtained for quasi‐solid‐state fiber‐shaped NiCo‐Fe batteries, which outperform most state‐of‐the‐art fiber‐shaped aqueous rechargeable batteries. These findings offer an innovative and feasible route to design high‐performance Fe‐based anodes and may inspire new development for the next‐generation wearable Ni‐Fe batteries.     

Ultrathin and Porous Ni3S2/CoNi2S4 3D‐Network Structure for Superhigh Energy Density Asymmetric Supercapacitors

3D‐networked, ultrathin, and porous Ni₃S₂/CoNi₂S₄ on Ni foam (NF) is successfully designed and synthesized by a simple sulfidation process from 3D Ni–Co precursors. Interestingly, the edge site‐enriched Ni₃S₂/CoNi₂S₄/NF 3D‐network is realized by the etching‐like effect of S^2? ions, which made the surfaces of Ni₃S₂/CoNi₂S₄/NF with a ridge‐like feature. The intriguing structural/compositional/componental advantages endow 3D‐networked‐free‐standing Ni₃S₂/CoNi₂S₄/NF electrodes better electrochemical performance with specific capacitance of 2435 F g^?1 at a current density of 2 A g^?1 and an excellent rate capability of 80% at 20 A g^?1. The corresponding asymmetric supercapacitor achieves a high energy density of 40.0 W h kg^?1 at an superhigh power density of 17.3 kW kg^?1, excellent specific capacitance (175 F g^?1 at 1A g^?1), and electrochemical cycling stability (92.8% retention after 6000 cycles) with Ni₃S₂/CoNi₂S₄/NF as the positive electrode and activated carbon/NF as the negative electrode. Moreover, the temperature dependences of cyclic voltammetry curve polarization and specific capacitances are carefully investigated, and become more obvious and higher, respectively, with the increase of test temperature. These can be attributed to the components' synergetic effect assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. This work provides a general, low‐cost route to produce high performance electrode materials for portable supercapacitor applications on a large scale.     

A Practicable Li/Na‐Ion Hybrid Full Battery Assembled by a High‐Voltage Cathode and Commercial Graphite Anode: Superior Energy Storage Performance and Working Mechanism

With the rapidly growing demand for low‐cost and safe energy storage, the advanced battery concepts have triggered strong interests beyond the state‐of‐the‐art Li‐ion batteries (LIBs). Herein, a novel hybrid Li/Na‐ion full battery (HLNIB) composed of the high‐energy and lithium‐free Na₃V₂(PO₄)₂O₂F (NVPOF) cathode and commercial graphite anode mesophase carbon micro beads is for the first time designed. The assembled HLNIBs exhibit two high working voltage at about 4.05 and 3.69 V with a specific capacity of 112.7 mA h g^?1. Its energy density can reach up to 328 W h kg^?1 calculated from the total mass of both cathode and anode materials. Moreover, the HLNIBs show outstanding high‐rate capability, long‐term cycle life, and excellent low‐temperature performance. In addition, the reaction kinetics and Li/Na‐insertion/extraction mechanism into/out NVPOF is preliminarily investigated by the galvanostatic intermittent titration technique and ex situ X‐ray diffraction. This work provides a new and profound direction to develop advanced hybrid batteries.     

Crystalline Ni(OH)2/Amorphous NiMoOx Mixed‐Catalyst with Pt‐Like Performance for Hydrogen Production

The achievement of effective alkaline hydrogen production from water electrolysis is an active field of research. Herein, an integrated electrode composed of crystalline Ni(OH)₂ and amorphous NiMoO_x is fabricated onto nickel foam (denoted as Ni(OH)₂–NiMoO_x/NF). The hydrogen evolution reaction (HER) kinetics are optimized along with phase transformation process during soaking operation. An overpotential of 36 mV to drive 10 mA cm^?2 along with the low Tafel slope of 38 mV dec^?1 reveals the catalyst's excellent HER performance and a Heyrovsky‐step‐controlled HER mechanism. When assembled into a urea‐assisted water electrolyzer, a voltage of 1.42 V can reach 10 mA cm^?2. Further experiments and Fourier transform infrared spectroscopy (FTIR) results illustrate the synergy effect between crystalline and amorphous areas and the optimized water dissociation step. Crystalline Ni(OH)₂ serves as the scissor for water dissociation in an alkali environment to produce H*, while the amorphous NiMoO_x layer serves as the location for H* adsorption and H₂ desorption.