Plasmid replication stimulates DNA recombination in Bacillus subtilis

The effects of plasmid replication on the frequency of homologous recombination have been investigated. For that purpose Bacillus subtilis strains that carry in their chromosome directly repeated DNA sequences, and an integrated copy of plasmid pE194 either proximal or distal to the repeats, were constructed. The repeat consists either of 3.9 X 10(3) base pBR322 sequences or 2.1 X 10(3) base B. subtilis chromosomal sequences. As plasmid pE194 is naturally thermosensitive for replication, the activity of the replicon could be regulated. Recombination between the repeated sequences was infrequent (about 10(-4) per generation) when the integrated plasmid did not replicate. It was 20 to 450 times higher when the plasmid was allowed to replicate, provided that the repeats were in the proximity of the plasmid. These results show that plasmid replication stimulates DNA recombination.     

Recombination enhancement by replication (RER) in Rhizobium etli

Studies in several organisms show that recombination and replication interact closely. Recombinational repair usually requires associated replication at some stage; moreover, additional replication can induce recombination through either homologous or illegitimate events. In prokaryotes, stimulation of recombination by replication is more dramatic when rolling circle replication is employed. In contrast, theta-type replication induces only a modest increase in recombination frequency. In this article, we show that induction of theta-type replication from a supernumerary origin in the symbiotic plasmid (pSym) of Rhizobium etli leads to a 1000-fold increase in deletion formation on this plasmid. These deletions span 120 kb (the symbiotic region) and have as endpoints the reiterated nitrogenase operons. We have named this phenomenon RER, for recombination enhancement by replication. RER is not affected by the position of the replication origin in the pSym, the direction of advance of the replication fork, or the distance from the origin to the recombining repeats. On the other hand, RER is dependent on an active recA allele, indicating that it is due to homologous recombination. RER displays a strong regionality restricted to the symbiotic region. The similarities and differences of RER with the recombination process observed at the terminus of replication of the Escherichia coli chromosome are discussed.     

Preferred crossover sites on polyomavirus DNA.

RmI is a hybrid replicon consisting of polyomavirus (Py) and mouse sequences that yields unit-length polyomavirus DNA via recombination between two directly repeated viral sequences of 182 base pairs (S repeats). To define the contribution of the S repeats in this intramolecular recombination, we derived from RmI a series of replicons containing the original S repeats as well as additional direct viral repeats which were 1 to 2 kilobases in length (L repeats). After mouse 3T6 cells were transfected with these constructs, recombination products that displayed the physical properties of homologous recombinants were detected. The structures of these recombinants indicated that whereas repeat length influences the likelihood of recombination, crossover occurs preferentially near the S repeats, provided that one of them is proximal to the viral origin of replication. This finding suggests that recombination near the S repeats depends on a process initiated near the viral origin of replication.     

Breakage--reunion and copy choice mechanisms of recombination between short homologous sequences.

To study recombination between short homologous sequences in Escherichia coli we constructed plasmids composed of the pBR322 replicon, M13 replication origin and a recombination unit inserted within and inactivating a gene encoding chloramphenicol resistance. The unit was composed of short direct repeats (9, 18 or 27 bp) which flanked inverted repeats (0, 8 or 308 bp) and a gene encoding kanamycin resistance. Recombination between direct repeats restored a functional chloramphenicol resistance gene, and could be detected by a simple phenotype test. The plasmids replicated in a double-stranded form, using the pBR322 replicon, and generated single-stranded DNA when the M13 replication origin was activated. The frequency of chloramphenicol-resistant cells was low (10(-8)-10(-4] when no single-stranded DNA was synthesized but increased greatly (to 100%) after induction of single-stranded DNA synthesis. Recombination between 9 bp direct repeats entailed no transfer of DNA from parental to recombinant plasmids, whereas recombination between 18 or 27 bp repeats entailed massive transfer. The presence or length of inverted repeats did not alter the pattern of DNA transfer. From these results we propose that direct repeats of 9 bp recombine by a copy choice process, while those greater than or equal to 18 bp can recombine by a breakage-reunion process. Genome rearrangements detected in many organisms often occur by recombination between sequences less than 18 bp, which suggests that they may result from copy choice recombination.     

A new theta-type thermosensitive replicon from Lactoccocus lactis as an integration vector for Enterococcus faecalis

We isolated a replication thermosensitive mutant of the theta-type lactococcal pUCL22 replicon. An improved version of this thermosensitive replicon was obtained by fusioning the replication repA gene with the downstream repB gene. The resulting plasmid was named pUCB3522Ts. It is highly instable at 42°C in Enterococcus faecalis. Integration into the chromosome via homologous recombination was monitored using the npr gene of E. faecalis JH2-2 as a target. A 513 bp PCR amplification product from an internal region of this npr gene was cloned into pUCB3522Ts. Integration of this construction into the JH2-2 npr gene was selected by shift temperature, from 30°C to 42°C. 85% of the analysed clones showed integration into the npr gene, demonstrating the practicality of this thermosensitive replicon as a genetic integrative tool for E. faecalis.     

Molecular characterization of the replicon of the Pediococcus pentosaceus 43200 pediocin A plasmid pMD136

The pediocin A-encoding plasmid of Pediococcus pentosaceus 43200, pMD136, was characterized by restriction enzyme analysis. Analysis of its replicon was facilitated by the construction of a probe vector consisting of the Escherichia coli plasmid pSP72 and the cat gene from Staphylococcus aureus plasmid pC194. The replication region of pMD136 was localized on a 1.6-kb EcoRI/BglII fragment. Sequencing analysis revealed a non-coding region, repA, spanning the first 440 bp, followed by an open reading frame, repB, encoding a putative protein of 390 amino acids. The non-coding region contained two sets of 6-bp and two sets of 22-bp direct repeats and two sets of inverted repeats upstream of the open reading frame. Strong homology of the isolated replicon was found to theta-type replicons of Lactococcus lactis plasmids. Segregational stability assay suggested at least two regions as potentially involved in the stabilization of pMD136. The plasmid's strong homology to other theta-type replicons and its relatively high stability suggest that pMD136 belongs to the widespread family of theta-replication plasmids.     

Amplification and excision of integrated polyoma DNA sequences require a functional origin of replication

Cells transformed by Polyoma virus (Py) can undergo a high rate of excision or amplification of integrated viral DNA sequences, and these phenomena require the presence of homology (i.e., repeats) within the viral insertion as well as a functional viral large T antigen (T-Ag). To determine whether the main role of large T-Ag in excision and amplification was replicative or recombination-promoting, we studied transformed rat cell lines containing tandem insertions of a ts-a Py molecule (encoding a thermolabile large T-Ag) with a deletion of the origin of viral DNA replication. Culturing of these cells at the temperature permissive for large T-Ag function did not result in any detectable excision or amplification of integrated Py sequences. We then introduced into origin-defective lines a recombinant plasmid containing the viral origin of replication and the gene coding for resistance to the antibiotic G418. All G418-resistant clones analyzed readily amplified the integrated plasmid molecules when grown under conditions permissive for large T-Ag function, showing that these cells produced viral large T-Ag capable of promoting amplification in trans of DNA sequences containing the Py origin. These observations strongly suggest that Polyoma large T antigen promotes excision or amplification of viral DNA by initiating replication at the integrated origin, providing a favorable substrate for subsequent recombination.     

Construction of cell lines that regulate by temperature the amplification and expression of influenza virus non-structural protein genes.

Monkey cell lines have been transformed with a mixture of plasmids pSV2neo and pSLVa232N, a derivative of plasmid pSLVa232 (Portela et al., 1985b). Plasmid pSLVa232N contained the influenza virus genes encoding non-structural proteins under the control of the SV40 late promoter in pSLts1 vector that includes the SV40 ori and the tsA209 T-antigen gene. At restrictive temperature, plasmid sequences remained stably integrated in the cell genome, but upon temperature shift-down, defined circular DNA molecules were generated and amplified up to 2000-5000 copies/cell. Restriction analysis, Southern blot hybridization and partial sequencing indicate that one such episome, pC5, was derived from the integrated plasmid sequences by a homologous recombination event that led to deletion of the pBR322 sequences included in pSLVa232N. Concomitant with gene amplification, an induction of 20-65-fold in the expression of NS1 and NS2 proteins was observed after temperature shift-down. Thus, gene cloning into vector pSLts1 and transformation at restrictive temperature of cells permissive for SV40 DNA replication, appears to be a useful strategy for the controlled amplification and expression of cloned genes.     

High-molecular-weight linear multimer formation by single-stranded DNA plasmids in Escherichia coli.

We inserted foreign DNA segments into plasmids which replicate by a rolling-circle mechanism in Escherichia coli and observed the appearance of high-molecular-weight plasmid multimers (HMW). This phenomenon, which occurs more frequently with GC-rich segments, depends on the mode of replication of the plasmid and on host homologous recombination functions. We found that (i) HMW are formed upon insertion of a foreign DNA segment into a single-stranded DNA plasmid, whereas the same DNA insert has no such effect on a theta replicon, and (ii) HMW are not present in a recA mutant strain but are found in a lexA (Ind-) mutant. Enzymatic studies allowed us to define the HMW structure as linear double-stranded tandem head-to-tail plasmid repeats. Use of heteroplasmid strains showed that HMW production by one plasmid does not affect another resident plasmid, indicating that no host functions are phenotypically inactivated. This distinguishes our system from the HMW observed with various replicons in the absence of RecBCD enzyme activity. We propose that the role of the foreign insert is to protect the DNA from RecBCD exonuclease attack.     

High-efficiency gene inactivation and replacement system for gram-positive bacteria.

A system for high-efficiency single- and double-crossover homologous integration in gram-positive bacteria has been developed, with Lactococcus lactis as a model system. The system is based on a thermosensitive broad-host-range rolling-circle plasmid, pG+host5, which contains a pBR322 replicon for propagation in Escherichia coli at 37 degrees C. A nested set of L. lactis chromosomal fragments cloned onto pG+host5 were used to show that the single-crossover integration frequency was logarithmically proportional to the length of homology for DNA fragments between 0.35 and 2.5 kb. Using random chromosomal 1-kb fragments, we showed that homologous integration can occur along the entire chromosome. We made use of the reported stimulatory effect of rolling-circle replication on intramolecular recombination to develop a protocol for gene replacement. Cultures were first maintained at 37 degrees C to select for a bacterial population enriched for plasmid integrants; activation of the integrated rolling-circle plasmid by a temperature shift to 28 degrees C resulted in efficient plasmid excision by homologous recombination and replacement of a chromosomal gene by the plasmid-carried modified copy. More than 50% of cells underwent replacement recombination when selection was applied for the replacing gene. Between 1 and 40% of cells underwent replacement recombination when no selection was applied. Chromosomal insertions and deletions were obtained in this way. These results show that gene replacement can be obtained at an extremely high efficiency by making use of the thermosensitive rolling-circle nature of the delivery vector. This procedure is applicable to numerous gram-positive bacteria.     

Identification of a replication protein and repeats essential for DNA replication of the temperate lactococcal bacteriophage TP901-1

DNA replication of the temperate lactococcal bacteriophage TP901-1 was shown to involve the gene product encoded by orf13 and the repeats located within the gene. Sequence analysis of 1,500 bp of the early transcribed region of the phage genome revealed a single-stranded DNA binding protein analogue (ORF12) and the putative replication protein (ORF13). The putative origin of replication was identified as series of repeats within orf13 and was shown to confer a TP901-1 resistance phenotype when present in trans. Site-specific mutations were introduced into the replication protein and into the repeats. The mutations were introduced into the TP901-1 prophage by homologous recombination by using a vector with a temperature-sensitive replicon. Subsequent analysis of induced phages showed that the protein encoded by orf13 and the repeats within orf13 were essential for phage TP901-1 amplification. In addition, analyses of internal phage DNA replication showed that the ORF13 protein and the repeats are essential for phage TP901-1 DNA replication in vivo. These results show that orf13 encodes a replication protein and that the repeats within the gene are the origin of replication.     

Molecular interactions of a replication initiator protein, RepA, with the replication origin of the enterococcal plasmid p703/5

We previously identified the origin of replication of p703/5, a small cryptic plasmid from the KBL703 strain of Enterococcus faecalis. The origin of replication contains putative regulatory cis-elements required for replication and a replication initiator (RepA) gene. The replicon of p703/5 is similar in its structural organization to theta-type plasmids, and RepA is homologous to a family of Rep proteins identified in several plasmids from Gram-positive bacteria. Here, we report molecular interactions between RepA and the replication origin of p703/5. DNase I footprinting using recombinant RepA together with electrophoretic mobility shift assays confirmed the binding of RepA to the replication origin of p703/5 via iterons and an inverted repeat. We also demonstrated the formation of RepA dimers and the different binding of RepA to the iteron and the inverted repeat using gel filtration chromatographic analysis, a chemical crosslinking assay, and electrophoretic mobility shift assays in the presence of guanidine hydrochloride. Our results suggest that RepA plays a regulatory role in the replication of the enterococcal plasmid p703/5 via mechanisms similar to those of typical iteron-carrying theta-type plasmids.     

New method for generating deletions and gene replacements in Escherichia coli.

We describe a method for generating gene replacements and deletions in Escherichia coli. The technique is simple and rapid and can be applied to most genes, even those that are essential. What makes this method unique and particularly effective is the use of a temperature-sensitive pSC101 replicon to facilitate the gene replacement. The method proceeds by homologous recombination between a gene on the chromosome and homologous sequences carried on a plasmid temperature sensitive for DNA replication. Thus, after transformation of the plasmid into an appropriate host, it is possible to select for integration of the plasmid into the chromosome at 44 degrees C. Subsequent growth of these cointegrates at 30 degrees C leads to a second recombination event, resulting in their resolution. Depending on where the second recombination event takes place, the chromosome will either have undergone a gene replacement or retain the original copy of the gene. The procedure can also be used to effect the transfer of an allele from a plasmid to the chromosome or to rescue a chromosomal allele onto a plasmid. Since the resolved plasmid can be maintained by selection, this technique can be used to generate deletions of essential genes.     

Identification of a Replication Protein and Repeats Essential for DNA Replication of the Temperate Lactococcal Bacteriophage TP901-1

DNA replication of the temperate lactococcal bacteriophage TP901-1 was shown to involve the gene product encoded by orf13 and the repeats located within the gene. Sequence analysis of 1,500 bp of the early transcribed region of the phage genome revealed a single-stranded DNA binding protein analogue (ORF12) and the putative replication protein (ORF13). The putative origin of replication was identified as series of repeats within orf13 and was shown to confer a TP901-1 resistance phenotype when present in trans. Site-specific mutations were introduced into the replication protein and into the repeats. The mutations were introduced into the TP901-1 prophage by homologous recombination by using a vector with a temperature-sensitive replicon. Subsequent analysis of induced phages showed that the protein encoded by orf13 and the repeats within orf13 were essential for phage TP901-1 amplification. In addition, analyses of internal phage DNA replication showed that the ORF13 protein and the repeats are essential for phage TP901-1 DNA replication in vivo. These results show that orf13 encodes a replication protein and that the repeats within the gene are the origin of replication.     

The integrated state of the rolling-circle plasmid pTB913 in the composite Bacillus plasmid pTB19.

Summary pTB19, a 27 kb plasmid originating from a thermophilic Bacillus species, contains integrated copies of two rolling-circle type plasmids on a 10.6 kb DNA fragment. In the present study we analysed the part of pTB19 that contains the rolling-circle plasmid pTB913 and the region in between the two rolling-circle plasmids. We show that, in the integrated state, pTB913 was flanked by a 55 by direct repeat that duplicated part of the replication initiation gene repB. Since repB was interrupted, the integrated pTB913 could not initiate rolling-circle replication. Autonomously replicating pTB913 was produced from pTB19, probably through recombination between the 55 by direct repeats; this was a rare event. Since the second integrated rolling-circle type plasmid also contained a non-functional replication initiation gene, replication of pT1319 must be controlled by the RepA determinant. Theta-type replication, controlled by RepA is likely to account for the high stability of pTB19. In between the two integrated rolling-circle plasmids was present an open reading frame (447 codons) which could encode a protein of unknown function.     

Effect of low temperature on stability of theta-type plasmids in Carnobacterium maltaromaticum.

The heterologous production of useful peptides such as bacteriocins by lactic acid bacteria (LAB) has been studied for use in the biopreservation of foods. Recombinant plasmids can suffer drawbacks such as segregational instability affecting the production of these peptides in certain environments such as absence of selective pressure or low temperature. The link between growth temperature characteristics of parental strains and stability of theta-type plasmids at a low temperature was investigated. The growth of four parental strains at 4 degrees C and stability of five derivative theta-type plasmids transformed into Carnobacterium maltaromaticum UAL26 at 25 and 4 degrees C were determined. Two plasmids (pCD11 and pCaT) derived from psychrotrophic LAB and plasmid, pHW800, from Enterococcus faecium 226 with unknown growth temperature characteristics, had excellent stability when strains were grown at 4 degrees C. Plasmids (pTRKH2 and pUCB820) derived from LAB that did not grow at refrigeration temperatures were not stable at 4 degrees C. When a DNA fragment from pCD11 containing 22-bp repeats, a putative replication initiation site, and the gene for the RepA protein was inserted into pTRKH2, the resulting derivative plasmid was 100% stable at 4 degrees C.     

Homologous plasmid recombination is elevated in immortally transformed cells.

The levels of intramolecular plasmid recombination, following transfection of a plasmid substrate for homologous recombination into normal and immortally transformed cells, have been examined by two independent assays. In the first assay, recovered plasmid was tested for DNA rearrangements which regenerate a functional neomycin resistance gene from two overlapping fragments. Following transformation of bacteria, frequencies of recombinationlike events were determined from the ratio of neomycin-resistant (recombinant) colonies to ampicillin-resistant colonies (indicating total plasmid recovery). Such events, yielding predominantly deletions between the directly repeated sequences, were substantially more frequent in five immortal cell lines than in any of three normal diploid cell strains tested. Effects of plasmid replication or interaction with T antigen and of bacterially mediated rejoining of linear molecules generated in mammalian cells were excluded by appropriate controls. The second assay used limited coamplification of a control segment of plasmid DNA, and of the predicted recombinant DNA region, primed by two sets of flanking oligonucleotides. Each amplified band was quantitated by reference to a near-linear standard curve generated concurrently, and recombination frequencies were determined from the ratio of recombinant/control DNA regions. The results confirmed that recombinant DNA structures were generated within human cells at direct repeats in the transfected plasmid and were markedly more abundant in an immortal cell line than in the diploid normal cells from which that line was derived.     

Gene conversion associated with site-specific recombination in yeast plasmid pSR1.

A circular DNA plasmid, pSR1, isolated from Zygosaccharomyces rouxii has a pair of inverted repeats consisting of completely homologous 959-base pair (bp) sequences. Intramolecular recombination occurs frequently at the inverted repeats in cells of Saccharomyces cerevisiae, as well as in Z. rouxii, and is catalyzed by a protein encoded by the R gene of its own genome. The recombination is, however, independent of the RAD52 gene of the host genome. A site for initiation of the intramolecular recombination in the S. cerevisiae host was delimited into, at most, a 58-bp region in the inverted repeats by using mutant plasmids created by linker insertion. The 58-bp region contains a pair with 14-bp dyad symmetry separated by a 3-bp spacer sequence. The recombination initiated at this site was accompanied by a high frequency of gene conversion (3 to 50% of the plasmid clones examined). Heterogeneity created by the linker insertion or by a deletion (at most 153 bp so far tested) at any place on the inverted repeats was converted to a homologous combination by the gene conversion, even in the rad52-1 mutant host. A mechanism implying branch migration coupled with DNA replication is discussed.