Study on the binding of Thioflavin T to beta-sheet-rich and non-beta-sheet cavities

Amyloid fibril formation plays a role in more than 20 diseases including Alzheimer's disease. In vitro detection of these fibrils is often performed using Thioflavin T (ThT), though the ThT binding mode is largely unknown. In the present study, spectral properties of ThT in binding environments representing beta-sheet-rich and non-beta-sheet cavities were examined. Acetylcholinesterase and gamma-cyclodextrin induced a characteristic ThT fluorescence similar to that with amyloid fibrils, whereas beta-cyclodextrin and the beta-sheet-rich transthyretin did not. The cavities of acetylcholinesterase and gamma-cyclodextrin were of similar diameter and only these cavities could accommodate two ThT ions according to molecular modelling. Binding stoichiometry studies also showed a possible binding of two ThT ions. Thus, the characteristic ThT fluorescence is induced in cavities with a diameter of 8-9A and a length able to accommodate the entire length of the ThT ion. The importance of a cavity diameter capable of binding two ThT ions, among others, indicates that an excimer formation is a plausible mechanism for the characteristic fluorescence. We propose a similar ThT binding mode in amyloid fibrils, where cavities of an appropriate size running parallel to the fibril axis have previously been proposed in several amyloid fibril models.     

Spectroscopic characterization of diverse amyloid fibrils in vitro by the fluorescent dye Nile red

The fluorescence of Nile red (9-diethylamino-5H-benzophenoxazine-5-one) is quenched in aqueous solutions but shows augmented fluorescence in hydrophobic environments. Nile red fluorescence was blue shifted and strongly augmented in the presence of various amyloid fibrils assayed under acidic as well as neutral pH conditions. Fibrils grown from lysozyme and insulin (at pH 1.6 and 65 °C), transthyretin (TTR) fibrils grown from the acid unfolded monomer (pH 2.0, 21 °C) or from the dissociated tetramer starting from native protein under less acidic conditions (pH 4.4, 37 °C) were detected. Nile red was also successfully employed in detecting Aβ1-42 and human prion protein (PrP90-231) amyloid fibrils grown at neutral pH. Nile red was amyloid fibril specific and did not fluoresce appreciably in the presence of the monomeric precursor proteins. Stoke's shifts of the wavelength maximum of Nile red bound to various fibrils were different (ranging from 615 nm to 638 nm) indicating sensitivity to the tertiary structure in its respective binding sites of different amyloid proteins. A polarity assay using ethanol-water mixtures and pure octanol ranging from dielectric constants between 10 and 70 showed a linear correlation of Nile red Stoke's shift and allowed assignment of amyloid fibril binding site polarity. Fluorescence resonance energy transfer between Thioflavin T (ThT) and Nile red was proven to be efficient and co-staining was employed to discriminate between conformational isoforms of Aβ1-42 amyloid fibrils grown under agitated and quiescent conditions. This paper demonstrates the complementary use of this fluorometric method for conformational typing of amyloid structures.     

Direct observation of amyloid fibril growth monitored by thioflavin T fluorescence

Real-time monitoring of fibril growth is essential to clarify the mechanism of amyloid fibril formation. Thioflavin T (ThT) is a reagent known to become strongly fluorescent upon binding to amyloid fibrils. Here, we show that, by monitoring ThT fluorescence with total internal reflection fluorescence microscopy (TIRFM), amyloid fibrils of beta2-microgobulin (beta2-m) can be visualized without requiring covalent fluorescence labeling. One of the advantages of TIRFM would be that we selectively monitor fibrils lying along the slide glass, so that we can obtain the exact length of fibrils. This method was used to follow the kinetics of seed-dependent beta2-m fibril extension. The extension was unidirectional with various rates, suggesting the heterogeneity of the amyloid structures. Since ThT binding is common to all amyloid fibrils, the present method will have general applicability for the analysis of amyloid fibrils. We confirmed this with the octapeptide corresponding to the C terminus derived from human medin and the Alzheimer's amyloid beta-peptide.     

A New Trend in the Experimental Methodology for the Analysis of the Thioflavin T Binding to Amyloid Fibrils

The studies on the determination of the characteristics of the amyloid fibril interaction with the dye were based on the analysis of the dependence of the ThT fluorescence intensity on its concentration in the solution containing the amyloid fibrils. In the present work, we revealed that this intuitive approach provided erroneous data. We propose a new approach which provides a means for characterizing the interaction of thioflavin T (ThT) with amyloid fibrils and for determining the binding stoichiometry and binding constants, absorption spectrum, molar extinction coefficient, and fluorescence quantum yield of the ThT bound to the sites of different binding modes of fibrils. The key point of this approach is sample preparation by equilibrium microdialysis. The efficiency of the proposed approach is demonstrated via the examination of the ThT binding to insulin and Aβ42 fibrils as well as to the native form of the Electrophorus electricus acetylcholinesterase. We show that the peculiarities of ThT interaction with amyloid fibrils depend on the amyloidogenic protein and on the binding mode. This approach is universal and can be used for the analysis of binding mechanism of any dye that interacts with its receptor. Therefore, the proposed approach represents an important addition to the existing arsenal of means for the diagnostics and therapy of the neurodegenerative diseases.     

On the binding of Thioflavin-T to HET-s amyloid fibrils assembled at pH 2

Amyloid fibrils are ordered β-sheet protein or peptide polymers. The benzothiazole dye Thioflavin-T (ThT) shows a strong increase in fluorescence upon binding to amyloid fibrils and has hence become the most commonly used amyloid-specific dye. In spite of this widespread use, the mechanism underlying specific binding and fluorescence enhancement upon interaction with amyloid fibrils remains largely unknown. Recent contradictory reports have proposed radically different modes of binding. We have studied the interaction of ThT with fibrils of the prion forming domain of the fungal HET-s prion protein assembled at pH 2 in order to try to gain some insight into the general mechanism of ThT-binding and fluorescence. We found that ThT does not bind to HET-s(218–289) fibrils as a micelle as previously proposed in the case of insulin fibrils. We have measured binding kinetics, affinity and stoichiometry at pH values above and below the pI of the HET-s(218–289) fibrils and found that binding is dramatically affected by pH and ionic strength. Binding is poor at acidic pH, presumably as a result of repulsive electrostatic interaction between the positively charged ThT molecule and the fibril surface. Finally, we found that ThT acquires chiral properties when it is fibril-bound. These results are discussed in relation to the different ThT-binding modes that have been proposed.     

Thioflavin T interaction with amyloid fibrils as an instrument for their studying

Benzthiazole dye thioflavin T (ThT) is widely used to study the formation and structure of amyloid fibrils. Nevertheless, till now there is no common opinion concerning molecular mechanisms of ThT binding to amyloid fibrils and the reasons of dramatic increase in its fluorescence quantum yield on incorporation into amyloid fibrils. Our data prove that ThT molecules incorporate in the amyloid fibrils in the monomeric form and there is no ground to suppose the formation of ThT dimers, eximers, or micells. It was shown that the increase in the quantum yield of ThT incorporated in amyloid fibrils was caused by restriction of benzthiazole and aminobenzene rings torsion fluctuations relative to each other. The use of equilibrium microdialysis allowed determining the absorption spectrum, the number of binding modes of ThT with insulin amyloid fibrils and for each mode determining the binding constants and the number of binding sites for each mode.     

Interactions between amyloidophilic dyes and their relevance to studies of amyloid inhibitors

Amyloid fibrils are filamentous aggregates of peptides and proteins implicated in a range of neurodegenerative disorders such as Alzheimer's and Parkinson's diseases. It has been known almost since their discovery that these β-sheet-rich proteinacious assemblies bind a range of specific dyes that, combined with other biophysical techniques, are convenient probes of the process of amyloid fibril formation. Two prominent examples of such dyes are Congo red (CR) and Thioflavin T (ThT). It has been reported that in addition to having a diagnostic role, CR is an inhibitor of the formation of amyloid structures, and these two properties have both been explained in terms of the same specific noncovalent interactions between the fibrils and the dye molecules. In this article, we show by means of quartz-crystal microbalance measurements that the binding of both ThT and CR to amyloid fibrils formed by the peptide whose aggregation is associated with Alzheimer's disease, Aβ(1-42), can be directly observed, and that the presence of CR interferes with the binding of ThT. Light scattering and fluorescence measurements confirm that an interaction exists between these dyes that can interfere with their ability to reflect accurately the quantity of amyloid material present in a given sample. Furthermore, we show that CR does not inhibit the process of amyloid fibril elongation, and therefore demonstrate the ability of the quartz-crystal microbalance method not only to detect and study the binding of small molecules to amyloid fibrils, but also to elucidate the mode of action of potential inhibitors.     

Binding Modes of Thioflavin-T to the Single-Layer β-Sheet of the Peptide Self-Assembly Mimics

Although the amyloid dye thioflavin-T (ThT) is among the most widely used tools in the study of amyloid fibrils, the mechanism by which ThT binds to fibrils and other β-rich peptide self-assemblies remains elusive. The development of the water-soluble peptide self-assembly mimic (PSAM) system has provided a set of ideal model proteins for experimentally exploring the properties and minimal dye-binding requirements of amyloid fibrils. PSAMs consist of a single-layer β-sheet (SLB) capped by two globular domains, which capture the flat, extended β-sheet features common among fibril-like surfaces. Recently, a PSAM that binds to ThT with amyloid-like affinity (low micromolar K_d) has been designed, and its crystal structure in the absence of bound ThT was determined. This PSAM thus provides a unique opportunity to examine the interactions of ThT with a β-rich structure. Here, we present molecular dynamics simulations of the binding of ThT to this PSAM β-sheet. We show that the primary binding site for ThT is along a shallow groove formed by adjacent Tyr and Leu residues on the β-sheet surface. These simulations provide an atomic-scale rationale for this PSAM's experimentally determined dye-binding properties. Together, our results suggest that an aromatic-hydrophobic groove spanning across four consecutive β-strands represents a minimal ThT binding site on amyloid fibrils. Grooves formed by aromatic-hydrophobic residues on amyloid fibril surfaces may therefore offer a generic mode of recognition for amyloid dyes.     

Specific in situ discrimination of amyloid fibrils versus α-helical fibres by the fluorophore NIAD-4

A wide range of human pathologies, including neurodegenerative diseases and other forms of amyloidosis, are associated with the formation of insoluble fibrillar protein aggregates known as amyloids. To gain insights into this process analytical methods are needed, which give quantitative data on the molecular events that are taking place. The dye Thioflavin T (ThT) is widely used for the spectroscopic determination of amyloid fibril formation. Different binding affinities to amyloids at neutral and acidic pH and the frequently observed poor binding at acidic pH are problematic in the use of the cationic ThT. The uncharged fluorescence probe [[5'-(4-hydroxyphenyl)[2,2'-bithiophen]-5-yl]methylene]-propanedinitrile (NIAD-4) has been recently designed by Swager and coworkers, in order to eliminate some of the limitations of ThT. Here we have used this novel dye for in vitro monitoring of the amyloid formation processes of de novo designed model peptides. Amyloid structures were successfully detected by NIAD-4 at neutral as well as acidic pH and no significant fluorescence was detectable in the presence of α-helical fibres. Thus, NIAD-4 proved to be a valuable alternative to ThT for spectroscopic studies on amyloid structures over a broad pH range.     

Investigation of the kinetics of insulin amyloid fibrils formation

Today, the investigation of the structure of ordered protein aggregates-amyloid fibrils, the influence of the native structure of the protein and the external conditions on the process of fibrillation-is the subject of intense investigations. The aim of the present work is to study the kinetics of formation of insulin amyloid fibrils at low pH values (conditions that are used at many stages of the isolation and purification of the protein) using the fluorescent probe thioflavin T. It is shown that the increase of the fluorescence intensity of ThT during the formation of amyloid fibrils is described by a sigmoidal curve, in which three areas can be distinguished: the lag phase, growth, and a plateau, which characterize the various stages of fibril formation. Despite the variation in the length of the lag phase at the same experimental conditions (pH and temperature), it is seen to drop during solution stirring and seeding. Data obtained by electron microscopy showed that the formed fibrils are long, linear filaments ～20 nm in diameter. With increasing incubation time, the fibril diameter does not change, while the length increases to 2–3 μm, which is accompanied by a significant increase in the number of fibril aggregates. All the experimental data show that, irrespective of the kinetics of formation of amyloid fibrils, their properties after the completion of the fibrillation process are identical. The results of this work, together with the previous studies of insulin amyloid fibrils, may be important for clarification the mechanism of their formation, as well as for the treatment of amyloidosis associated with the aggregation of insulin.     

The binding of thioflavin T and its neutral analog BTA-1 to protofibrils of the Alzheimer's disease Abeta(16-22) peptide probed by molecular dynamics simulations

Thioflavin T (ThT) is a fluorescent dye commonly used to stain amyloid plaques, but the binding sites of this dye onto fibrils are poorly characterized. We present molecular dynamics simulations of the binding of ThT and its neutral analog BTA-1 [2-(4'-methylaminophenyl)benzothiazole] to model protofibrils of the Alzheimer's disease Abeta(16-22) (amyloid beta) peptide. Our simulations reveal two binding modes located at the grooves of the beta-sheet surfaces and at the ends of the beta-sheet. These simulations provide new insight into recent experimental work and allow us to characterize the high-capacity, micromolar-affinity site seen in experiment as binding to the beta-sheet surface grooves and the low-capacity, nanomolar-affinity site seen as binding to the beta-sheet extremities of the fibril. The structure-activity relationship upon mutating charged ThT to neutral BTA-1 in terms of increased lipophilicity and binding affinity was studied, with calculated solvation free energies and binding energies found to be in qualitative agreement with the experimental measurements.     

Amyloid fibril formation is suppressed in microgravity

In the future, humans may live in space because of global pollution and weather fluctuations. In microgravity, convection does not occur, which may change the amyloidogenicity of proteins. However, the effect of gravity on amyloid fibril formation is unclear and remains to be elucidated. Here, we analyzed the effect of microgravity on amyloid fibril formation of amyloidogenic proteins including insulin, amyloid β₄₂ (Aβ₄₂), and transthyretin (TTR). We produced microgravity (10^?3 g) by using the gravity controller Gravite. Human insulin, Aβ₄₂, and human wild-type TTR (TTRwt) were incubated at pH 3.0, 7.0, and 3.5 at 37 °C, respectively, in 1 g on the ground or in microgravity. We measured amyloidogenicity via the thioflavin T (ThT) method and cell-based 1-fluoro-2,5-bis[(E)-3-carboxy-4-hydroxystyryl]benzene (FSB) assay. ThT fluorescence intensity and cell-based FSB assay results for human insulin samples were decreased in microgravity compared with results in 1 g. Aβ₄₂ samples did not differ in ThT fluorescence intensity in microgravity and in 1 g on the ground. However, in the cell-based FSB assay, the staining intensity was reduced in microgravity compared with that on 1 g. Human TTRwt tended to form fewer amyloid fibrils in ThT fluorescence intensity and cell-based FSB assays in microgravity than in 1 g. Human insulin and Aβ₄₂ showed decreased amyloid fibril formation in microgravity compared with that in 1 g. Human TTRwt tended to form fewer amyloid fibrils in microgravity. Our experiments suggest that the earth's gravity may be an accelerating factor for amyloid fibril formation.     

Optimum amyloid fibril formation of a peptide fragment suggests the amyloidogenic preference of beta2-microglobulin under physiological conditions

Beta(2)-microglobulin (beta(2)m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Although full-length beta(2)m readily forms amyloid fibrils in vitro by seed-dependent extension with a maximum at pH 2.5, fibril formation under physiological conditions as detected in patients has been difficult to reproduce. A 22-residue K3 peptide of beta(2)m, Ser(20)-Lys(41), obtained by digestion with Acromobacter protease I, forms amyloid fibrils without seeding. To obtain further insight into the mechanism of fibril formation, we studied the pH dependence of fibril formation of the K3 peptide and its morphology using a ThT fluorescence assay and electron microscopy, respectively. K3 peptide formed amyloid fibrils over a wide range of pH values with an optimum around pH 7 and contrasted with the pH profile of the seed-dependent extension reaction of full-length beta(2)m. This suggests that once the rigid native-fold of beta(2)m is unfolded and additional factors triggering the nucleation process are provided, full-length beta(2)m discloses an intrinsic potential to form amyloid fibrils at neutral pH. The fibril formation was strongly promoted by dimerization of K3 through Cys(25). The morphology of the fibrils varied depending on the fibril formation conditions and the presence or absence of a disulfide bond. Various fibrils had the potential to seed fibril formation of full-length beta(2)m accompanied with a characteristic lag phase, suggesting that the internal structures are similar.     

In vitro characterization of lactoferrin aggregation and amyloid formation

Lactoferrin has previously been identified in amyloid deposits in the cornea, seminal vesicles, and brain. We report in this paper a highly amyloidogenic region of lactoferrin (sequence of NAGDVAFV). This region was initially identified by sequence comparison with medin, a 5.5 kDa amyloidogenic fragment derived from lactadherin. Subsequent characterization revealed that this peptide forms amyloid fibrils at pH 7.4 when incubated at 37 degrees C. Furthermore, although full-length lactoferrin does not by itself form amyloid fibrils, the protein does bind to the peptide fibrils as revealed by an increase in thioflavin T fluorescence and the presence of enlarged fibrils by transmission electron microscopy and polarized light microscopy. The binding of lactoferrin is a selective interaction with the NAGDVAFV fibrils. Lactoferrin does not bind to insulin or lysozyme fibrils, and the NAGDVAFV fibrils do not bind to soluble insulin or lysozyme. The lactoferrin appears to coat the peptide fibril surface to form mixed peptide/protein fibrils, but again there is no evidence for the formation of lactoferrin-only fibrils. This interaction, therefore, seems to involve selective binding rather than conventional seeding of fibril formation. We suggest that such a process could be generally important in the formation of amyloid fibrils in vivo since the identification of both full-length protein and protein fragments is common in ex vivo amyloid deposits.     

Michler's hydrol blue: a sensitive probe for amyloid fibril detection

Michler's hydrol blue (MHB) is investigated with respect to photophysical properties in varied solvent environment and when bound to insulin and lysozyme fibrils. The MHB chromophore is shown to act like a molecular rotor and bind well to amyloid fibrils, where it exhibits a characteristic red-shift in its excitation spectrum and an increase in the emission quantum yield upon binding. MHB is more sensitive to environmental changes than Thioflavin T (ThT) and furthermore, in contrast to the latter amyloid probe, can differentiate between insulin and lysozyme fibrils by a more red-shifted excitation spectrum for insulin fibrils. To support the experimental observations, time-dependent density functional theory (TDDFT) calculations were performed on MHB at several levels of theory. The predicted changes of spectral properties as a function of the environment are in good agreement with the experimental results. Linear dichroism (LD) is used to determine the orientation of the MHB within the fibrils. It was shown through LD and molecular modeling that MHB aligns itself preferentially parallel with the amyloid fiber at an angle of 14°-22° to the fibril axis and along the grooves of the β-sheet.     

Hierarchical assembly of beta2-microglobulin amyloid in vitro revealed by atomic force microscopy

The kinetics of spontaneous assembly of amyloid fibrils of wild-type beta(2)-microglobulin (beta(2)M) in vitro, under acid conditions (pH 2.5) and low ionic strength, has been followed using thioflavin-T (ThT) binding. In parallel experiments, the morphology of the different fibrillar species present at different time-points during the growth process were characterised using tapping-mode atomic force microscopy (TM-AFM) in air and negative stain electron microscopy (EM). The thioflavin-T assay shows a characteristic lag phase during which the nucleation of fibrils occurs before a rapid growth in fibril density. The volume of fibrils deposited on mica measured from TM-AFM images at each time-point correlates well with the fluorescence data. TM-AFM and negative-stain EM revealed the presence of various kinds of protein aggregates in the lag phase that disappear concomitantly with a rise in the density of amyloid fibrils, suggesting that these aggregates precede fibril growth and may act as nucleation sites. Three distinct morphologies of mature amyloid fibrils were observed within a single growth experiment, as observed previously for the wild-type protein and the variant N17D. Additional supercoiled morphologies of the lower-order fibrils were observed. Comparative height analysis from the TM-AFM data allows each of the mature fibril types and single protofilaments to be identified unambiguously, and reveals that the assembly occurs via a hierarchy of morphological states.     

Conformational changes during amyloid fibril formation of pancreatic thiol proteinase inhibitor: effect of copper and zinc

Pancreatic thiol proteinase inhibitor (PTPI), a variant of cystatin superfamily of cysteine protease inhibitors, has been isolated from pancreas of Capra hircus. In the present study, we examined the effects of acid denaturation and a co-solvent on PTPI with a focus on protein conformational changes and amyloid fibril formation. The results demonstrate that PTPI can form amyloid like fibrils. Acid denaturation as studied by CD and fluorescence spectroscopy showed that PTPI populates three partly unfolded species, a native like state at pH 3.0, a structured molten globule at pH 1.0 and partly unfolded species at pH 2.0, from each of which amyloid like fibrils grow as assessed by Thioflavin T (ThT) spectroscopy. Effect of trifluoroethanol (TFE) on acid induced states of PTPI was analyzed. TFE stabilized each of the three acid-induced intermediates at predenaturational concentrations (10%) and accelerated fibril formation. Morphology of the protein species at the beginning and end of reactions was observed using transmission electron microscopy. Solvent conditions were decisive for final fibril morphology. Biometals, Cu²⁺ and Zn²⁺ produced a concentration dependent decline in ThT fluorescence suggesting deaggregation of the fibrils. When added prior to amyloid fibril initiation 50 μM Cu²⁺ or 10 μM Zn²⁺ prevented any amyloid aggregation. Implications for therapeutics in view of Cu²⁺ and Zn²⁺ as essential micronutrients are suggested.     

Amyloid fibril formation and disaggregation of fragment 1-29 of apomyoglobin: insights into the effect of pH on protein fibrillogenesis

The N-terminal fragment 1-29 of horse heart apomyoglobin (apoMb(1-29)) is highly prone to form amyloid-like fibrils at low pH. Fibrillogenesis at pH 2.0 occurs following a nucleation-dependent growth mechanism, as evidenced by the thioflavin T (ThT) assay. Transmission electron microscopy (TEM) confirms the presence of regular amyloid-like fibrils and far-UV circular dichroism (CD) spectra indicate the acquisition of a high content of beta-sheet structure. ThT assay, TEM and CD highlight fast and complete disaggregation of the fibrils, if the pH of a suspension of mature fibrils is increased to 8.3. It is of interest that amyloid-like fibrils form again if the pH of the solution is brought back to 2.0. While apoMb(1-29) fibrils obtained at pH 2.0 are resistant to proteolysis by pepsin, the disaggregated fibrils are easily cleaved at pH 8.3 by trypsin and V8 protease, and some of the resulting fragments aggregate very quickly in the proteolysis mixture, forming amyloid-like fibrils. We show that the increase of amyloidogenicity of apoMb(1-29) following acidification or proteolysis at pH 8.3 can be attributed to the decrease of the peptide net charge following these alterations. The results observed here for apoMb(1-29) provide an experimental basis for explaining the effect of charge and pH on amyloid fibril formation by both unfolded and folded protein systems.     

Effect of environmental factors on the kinetics of insulin fibril formation: elucidation of the molecular mechanism

In the search for the molecular mechanism of insulin fibrillation, the kinetics of insulin fibril formation were studied under different conditions using the fluorescent dye thioflavin T (ThT). The effect of insulin concentration, agitation, pH, ionic strength, anions, seeding, and addition of 1-anilinonaphthalene-8-sulfonic acid (ANS), urea, TMAO, sucrose, and ThT on the kinetics of fibrillation was investigated. The kinetics of the fibrillation process could be described by the lag time for formation of stable nuclei (nucleation) and the apparent rate constant for the growth of fibrils (elongation). The addition of seeds eliminated the lag phase. An increase in insulin concentration resulted in shorter lag times and faster growth of fibrils. Shorter lag times and faster growth of fibrils were seen at acidic pH versus neutral pH, whereas an increase in ionic strength resulted in shorter lag times and slower growth of fibrils. There was no clear correlation between the rate of fibril elongation and ionic strength. Agitation during fibril formation attenuated the effects of insulin concentration and ionic strength on both lag times and fibril growth. The addition of ANS increased the lag time and decreased the apparent growth rate for insulin fibril formation. The ANS-induced inhibition appears to reflect the formation of amorphous aggregates. The denaturant, urea, decreased the lag time, whereas the stabilizers, trimethylamine N-oxide dihydrate (TMAO) and sucrose, increased the lag times. The results indicated that both nucleation and fibril growth were controlled by hydrophobic and electrostatic interactions. A kinetic model, involving the association of monomeric partially folded intermediates, whose concentration is stimulated by the air-water interface, leading to formation of the critical nucleus and thence fibrils, is proposed.     

Effect of amino acid variations in the central region of human serum amyloid A on the amyloidogenic properties

Human serum amyloid A (SAA) is a precursor protein of the amyloid fibrils that are responsible for AA amyloidosis. Of the four human SAA genotypes, SAA1 is most commonly associated with AA amyloidosis. Furthermore, SAA1 has three major isoforms (SAA1.1, 1.3, and 1.5) that differ by single amino acid variations at two sites in their 104-amino acid sequences. In the present study, we examined the effect of amino acid variations in human SAA1 isoforms on the amyloidogenic properties. All SAA1 isoforms adopted α-helix structures at 4 °C, but were unstructured at 37 °C. Heparin-induced amyloid fibril formation of SAA1 was observed at 37 °C, as evidenced by the increased thioflavin T (ThT) fluorescence and β-sheet structure formation. Despite a comparable increase in ThT fluorescence, SAA1 molecules retained their α-helix structures at 4 °C. At both temperatures, no essential differences in ThT fluorescence and secondary structures were observed among the SAA1 isoforms. However, the fibril morphologies appeared to differ; SAA1.1 formed long and curly fibrils, whereas SAA1.3 formed thin and straight fibrils. The peptides corresponding to the central regions of the SAA1 isoforms containing amino acid variations showed distinct amyloidogenicities, reflecting their direct effects on amyloid fibril formation. These findings may provide novel insights into the influence of amino acid variations in human SAA on the pathogenesis of AA amyloidosis.