Fractional and structural characterization of hemicelluloses isolated by alkali and alkaline peroxide from barley straw

Eight hemicellulosic fractions were obtained by sequential treatment of dewaxed barley straw with 0.1 M NaOH at 45 °C for 3 h, 0.25, 0.5, 1.0, 1.5, 2.0, and 3.0% H₂O₂ at 45 °C for 3 h at pH 11.5, and 10% KOH–1% Na₂B₄O₇·10H₂O at 28 °C for 15 h under continuous agitation. The yields of the fractions were 8.0, 3.1, 3.3, 3.3, 2.2, 2.0, 2.0, and 9.9%, respectively, of the initial amount of barley straw, corresponding to the dissolution of 21.6, 8.4, 8.9, 8.9, 5.9, 5.4, 5.4, and 26.7% of the original hemicelluloses. Meanwhile, the successive treatment also solubilized 29.1, 15.8, 14.6, 10.8, 4.5, 3.2, 2.7, and 3.7% of the original lignin, respectively. This sequential extraction together resulted in dissolution of 91.1% of the original hemicelluloses and 84.8% of the original lignin. The 0.1 M NaOH-soluble hemicellulosic fraction contained mainly xylose, glucose, and arabinose, 44.2, 15.7, and 15.2%, respectively, while the 10% KOH–1% Na₂B₄O₇·10H₂O-soluble fraction predominated in xylose, 75.0%. The six alkaline peroxide-soluble fractions were composed of 50.3–54.4% xylose, 14.7–16.9% arabinose, 6.8–10.7% glucose, 6.8–8.5% glucuronic acid or 4-O-methyl- -glucuronic acid, 0.4–1.5% mannose, and 0.3–1.2% rhamnose. All the hemicellulosic fractions contained substantial amounts of glucuronoarabinoxylans and noticeable quantities of β-glucans. In comparison, the six hemicellulosic fractions, isolated with alkaline peroxide, had much higher molecular weights (56,890–63,810 g mol⁻¹) than those of the two hemicellulosic preparations (28,000–29,080 g mol⁻¹), isolated with alkali in the absence of hydrogen peroxide. The thermal stability of the hemicelluloses increased with an increment of their molar mass.     

Fractional extraction and physico-chemical characterization of hemicelluloses and cellulose from sugar beet pulp

Four hemicelluloses and cellulose fractions were extracted with 10% KOH or 7.5% NaOH at 15°C for 16 h and with 24% KOH or 17.5% NaOH at 15°C for 2 h from defatted, protein and pectin free, lignified or delignified sugar beet pulp (SBP). There was no significant difference in the yield and sugar composition of isolated hemicelluloses and cellulose obtained from four different procedures. 7.5% NaOH extraction at 15°C for 16 h from lignified SBP gave a slightly higher yield of hemicelluloses (10.96%), while 24% KOH extraction at 15°C for 2 h from delignified SBP produced the highest yield of cellulose (18.35%). Molecular-average weights ranged from 88 850 to 91 330 Da for the hemicelluloses obtained from lignified SBP, and 21 620–21 990 Da for the hemicelluloses isolated from delignified SBP. The neutral sugar composition of the hemicelluloses consisted of glucose, arabinose, galactose, xylose, and minor quantities of rhamnose and mannose. The infrared spectra showed an absorption band at 900 cm⁻¹, indicating some amounts of β-linked polysaccharides. Besides ferulic and p-coumaric acids, six other phenolics were also identified in the mixture of alkaline nitrobenzene oxidation of associated lignin in the isolated hemicelluloses and cellulose fractions.     

Chlorine-free extraction of cellulose from rice husk and whisker isolation

This work reports the isolation of cellulose whiskers from rice husk (RH) by means of an environmental friendly process for cellulose extraction and bleaching. The multistep process begins with the removal of pectin, cutin, waxes and other extractives from rice husk, then an alkaline treatment for the removal of hemicelluloses and lignin, and a two-step bleaching with hydrogen peroxide/tetra-acetylethylenediamine (TAED), followed by a mixture of acetic and nitric acids, for further delignification of the cellulose pulp. The techniques of infrared absorption spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), modulated differential scanning calorimetry (MDSC) and X-ray diffraction (XRD) showed that the overall process is adequate to obtain cellulose with high purity and crystallinity. This cellulose was submitted to sulfuric acid hydrolysis with the aim to isolate the whiskers. They showed the typical elongated rod-like aspect as revealed by transmission electron microscopy (TEM) and atomic force microscopy (AFM).     

Characteristics of degraded cellulose obtained from steam-exploded wheat straw

The isolation of cellulose from wheat straw was studied using a two-stage process based on steam explosion pre-treatment followed by alkaline peroxide post-treatment. Straw was steamed at 200 degrees C, 15 bar for 10 and 33 min, and 220 degrees C, 22 bar for 3, 5 and 8 min with a solid to liquid ratio of 2:1 (w/w) and 220 degrees C, 22 bar for 5 min with a solid to liquid ratio of 10:1, respectively. The steamed straw was washed with hot water to yield a solution rich in hemicelluloses-derived mono- and oligosaccharides and gave 61.3%, 60.2%, 66.2%, 63.1%, 60.3% and 61.3% of the straw residue, respectively. The washed fibre was delignified and bleached by 2% H2O2 at 50 degrees C for 5 h under pH 11.5, which yielded 34.9%, 32.6%, 40.0%, 36.9%, 30.9% and 36.1% (% dry wheat straw) of the cellulose preparation, respectively. The optimum cellulose yield (40.0%) was obtained when the steam explosion pre-treatment was performed at 220 degrees C, 22 bar for 3 min with a solid to liquid ratio of 2:1, in which the cellulose fraction obtained had a viscosity average degree of polymerisation of 587 and contained 14.6% hemicelluloses and 1.2% klason lignin. The steam explosion pre-treatment led to a significant loss in hemicelluloses and alkaline peroxide post-treatment resulted in substantial dissolution of lignin and an increase in cellulose crystallinity. The six isolated cellulose samples were further characterised by FT-IR and 13C-CP/MAS NMR spectroscopy and thermal analysis.     

Fractionation of wheat straw by atmospheric acetic acid process

Fractionation of wheat straw was investigated using an atmospheric acetic acid process. Under the typical conditions of 90% (v/v) aqueous AcOH, 4% H(2)SO(4) (w/w, on straw), ratio of liquor to straw (L/S) 10 (v/w), pulping temperature 105 degrees C, and pulping time 3h, wheat straw was fractionated to pulp (cellulose), lignin and monosaccharides mainly from hemicellulose with yields of approximately 50%, 15% and 35%, respectively. Acetic acid pulp from the straw had an acceptable strength for paper and could be bleached to a high brightness over 85% with a short bleaching sequence. Acetic acid pulp was also a potential feedstock for fuels and chemicals. The acetic acid process separated pentose and hexose in wheat straw to a large extent. Most of the pentose (xylan) was dissolved, whereas the hexose (glucan) remained in the pulp. Approximately 30% of carbohydrates in wheat straw were hydrolyzed to monosaccharides during acetic acid pulping, of which xylose accounted for 70% and glucose for 12%. The acetic acid lignin from wheat straw showed relatively lower molecular weight and fusibility, which made the lignin a promising raw material for many products, such as adhesive and molded products.     

Effect of carbon source on the production of oxalic acid and hydrogen peroxide by brown-rot fungus Poria placenta

Oxalic acid and hydrogen peroxide have been suggested to be essential in the degradation of wood carbohydrates by brown-rot fungi. The production of oxalic acid, hydrogen peroxide and endo-β-1,4-glucanase activity by the brown-rot fungus Poria placenta was studied on crystalline cellulose, amorphous cellulose and glucose media. Oxalic acid and hydrogen peroxide by P. placenta were clearly produced on culture media containing either crystalline or amorphous cellulose. Oxalic acid and hydrogen peroxide were formed simultaneously and highest amounts of oxalic acid (1.0 g l⁻¹) and hydrogen peroxide (39.5 μM) were obtained on amorphous cellulose after 3 weeks cultivation. On glucose medium the amounts were low. The endoglucanase activity was observed to increase during the cultivation and was most pronounced on glucose medium and thus indicated the constitutive characteristics of the brown-rot cellulases.     

Kinetics of polysaccharide degradation during ethanol–alkali delignification of giant reed—Part 1. Cellulose and xylan

The degradation kinetics of the principal polysaccharides (cellulose and xylan) of the agro-fibre crop Arundo donax L. (giant reed) during ethanol–alkali delignification is reported. Based on the properties of a multi-component reaction system, the degradation kinetics of both polysaccharides was accurately described in terms of two simultaneous irreversible first-order reactions corresponding to removal of two kinetically homogeneous fractions. The moderate cellulose losses during pulping (about 4.5%) result mainly from the removal of the more reactive cellulose fraction, that accounted for 4% of initial cellulose. The bulk of the cellulose (96%) degrades slowly with three orders lower rate with pulping progress. The apparent activation energy of cellulose fractions degradation was estimated as 105.2 and 106.5 kJ mol⁻¹, respectively. Substantial loss of xylan during pulping (about 55%, as a homoxylan) is caused by fast removal of the first very reactive fraction, covering about 48% of total xylan. The degradation rate of the second xylan fraction is only one order higher of the bulk cellulose degradation. The activation energy of xylan fractions degradation was found as 74.4 and 140.9 kJ mol⁻¹, respectively.     

Changes in the structural composition of hardwood kraft pulp during bleaching

The possibility of using xylanase preparations for hydrolyzing hemicelluloses in a non-bleached kraft pulp in order to facilitate its bleaching was studied. The effects of enzymatic preparations of fungal and bacterial origins were examined, and the optimal conditions for xylanase activity were determined. UV spectroscopy demonstrated that the treatment of kraft pulp with enzymatic preparations containing xylanase facilitated the subsequent removal of lignin and increased the brightness by 5%. The effect of enzymatic treatment was retained in the case of peroxide bleaching. The enzymatic preparations studied are promising for the development of chlorine-free pulp bleaching technologies.     

Change in composition of structural components of leaf cellulose sulfate during fermentation bleaching by xylanases

The possibility of the use of xylanase preparations for hydrolysing hemicelluloses in a non-bleached kraft pulp in order to facilitate its bleaching was studied. The effects of enzymatic preparations of the fungal and bacterial origins were examined, and the optimal conditions for xylanase activity were determined. UV spectroscopy demonstrated that the treatment of kraft pulp with the enzymatic preparations containing xylanase facilitated the subsequent removal of lignin and increased the brightness by 5%. The effect of enzymatic treatment was retained in the case of peroxide bleaching. The enzymatic preparations studied are promising for the development of chlorine-free pulp bleaching technologies.     

Degradation dynamics of lignocellulose materials by wood-rottingPleurotus fungi

When grown on wheat straw,Pleurotus decomposes both the lignin and the cellulose components of the substrate. The course of degradation differs during growth and fructification. The losses of dry mass during growth were about 20 %. The absolute amount of hemicelluloses, cellulose and lignin was decreasing. Hemicelluloses and lignin were degraded at a higher rate than cellulose. The total mass losses of the substrate after fructification were 32 to 45 %. Cellulose was consumed at a higher rate than lignin.     

Preliminary studies on TCF bleaching of Pinus pinaster acetosolv pulps.

Oxygen pre-treatment of Pinus pinaster acetosolv pulps has been studied as a first step towards TCF bleaching. Using a 2(3) factorial design, the influence of temperature (80-120 degrees C), time (1-2 h) and NaOH concentration (1.5-3%) on pulp yield in the oxygen stage, chemical composition and physical properties of the pulps obtained was studied. Pulps pre-bleached with oxygen in the conditions selected as optimal (80 degrees C, 1 h with 2.25% NaOH) have been bleached with TCF sequences which included stages with hydrogen peroxide or hydrogen peroxide-oxygen under pressure. Even if high degrees of delignification were reached, with a reduction in Kappa number up to 95% and without important loss of viscosity, the carbohydrates degradation, especially hemicelluloses in the acetic acid delignification, reduces the strength potential of the pulps.     

Effect of xylanases on peroxide bleachability of eucalypt (E. globulus) kraft pulp

Industrial eucalypt (E. globulus L.) kraft pulp was treated with two commercial xylanase preparations Ecopulp^® TX-200A and Pulpzyme^® HC (endo-1,4-β-xylanase activity; EC 3.2.1.8) and bleached by totally chlorine-free (TCF) three-stage hydrogen peroxide bleaching sequence, without oxygen pre-delignification. The effect of enzymatic stage on pulp properties and bleachability has been studied and compared with reference (control) pulps, processed without enzyme addition. The similar mode of enzymatic action was noted for both xylanase preparations. Final brightness of 86% ISO was achieved after complete bleaching. Direct bleaching effect caused pulp brightening (by 1.2–1.5% ISO) and delignification (by 7–10%) immediately after the enzymatic stage. The maximal bleach boosting was shown after the first peroxide stage and then diminished, despite the progressive increase in delignification over the control. The loss in efficiency of xylanase treatment by the end of peroxide bleaching was associated with specific behavior of xylan-derived chromophores, i.e., hexenuronic acids.     

The role of water-soluble components in phytotoxicity from decomposing straw

Summary When seedling development is slowed by the presence of straw in wet seed-beds both microbial products and compounds of plant origin contribute to phytotoxicity. Hot (100°C) water-soluble extracts from fresh straw contained phytotoxic substances but these accounted for less of the phytotoxicity than the microbial products, primarily acetic acid, from anaerobic fermentation of the insoluble straw polysaccharides (cellulose and hemicelluloses). The water-soluble components however also included mineral salts required in the decomposition of these polysaccharides.     

Preparation and characterisation of methylcellulose from annual cardoon and juvenile eucalyptus

We have studied the preparation of methylcellulose from annual cardoon and juvenile eucalyptus. The high cellulose and low lignin contents of these plants make them potential alternative resources for cellulose derivation. Their high quality pulps were obtained by the Impregnation Rapid Steam Pulping (IRSP) process and Total Chloride Free (TCF) bleaching sequences using hydrogen peroxide. The bleached pulp was methylated twice in an isopropanol slurry at 60 °C for 22 h after mercerisation in 40% NaOH solution. Yields of water-soluble and alkali-soluble methylcellulose were determined by solvent extraction. Substitution patterns of methylcellulose were determined by ¹³C Nuclear Magnetic Resonance (NMR) spectroscopy. The intrinsic viscosities and solution properties of methylcellulose were measured in either 4% NaOH solution or dimethyl sulphoxide (DMSO). This study shows that annual cardoon and juvenile eucalyptus can produce high-quality methylcellulose, which can be used as alternative resources for the production of methylcellulose.     

Ultrasensitive assay of azithromycin in medicine and bio-fluids based on its enhanced luminol-H(2)O(2) chemiluminescence reaction using flow injection technique

A simple flow injection chemiluminescence method with synergistic enhancement has been investigated for the rapid and sensitive determination of azithromycin. The synergistic action was significant in the chemiluminescence system of luminol–hydrogen peroxide with azithromycin as an enhancer. The enhanced chemiluminescence intensity was linear with the concentration of azithromycin over the range from 0.1 pg mL⁻¹ to 1.0 ng mL⁻¹ (r²⁼0.9988) with a detection limit (3σ) of 0.04 pg mL⁻¹. At a flow rate of 2.0 mL min⁻¹, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 3.0%. The proposed method was applied successfully in the assay of azithromycin in pharmaceutical preparations, human urine and serum without any pre-treatment procedure.     

Fractional purification and bioconversion of hemicelluloses

Hemicelluloses are types of plant cell wall polysaccharides, and the world's second most abundant renewable polymers after cellulose in lignocellulosic materials. They represent a type of hetero-polysaccharide with complex structure containing glucose, xylose, mannose, galactose, arabinose, rhamnose, glucuronic acid, and galacturonic acid in various amounts, depending on the source. Hemicelluloses are usually bonded to other cell-wall components such as cellulose, cell-wall proteins, lignin, and phenolic compounds by covalent and hydrogen bonds, and by ionic and hydrophobic interactions. This paper provides a review on hemicelluloses from lignocellulosic materials, especially in regard to their isolation and purification methods, and bioconversion. Current isolation and purification strategies are summarized, including: alkali peroxide extraction, organic solvent extraction, steam explosion, ultrasound-assisted extraction, microwave-assisted extraction, column chromatography, and membrane separation. In addition, the bioconversion of hemicelluloses including pretreatment, enzymatic hydrolysis, and fermentation are discussed.     

模拟氮沉降对华西雨屏区天然常绿阔叶林凋落物木质素和纤维素降解的影响

从2013年11月至2014年11月,采用尼龙网袋法对华西雨屏区天然常绿阔叶林凋落物进行原位分解试验,模拟N(NH₄NO₃)沉降水平分别为对照(0 g N·m^-2·a^-1)、低氮沉降(5 g N·m^-2·a^-1)、中氮沉降(15 g N·m^-2·a^-1)和高氮沉降(30 g N·m^-2·a^-1),研究了N沉降对常绿阔叶林凋落物分解及其木质素和纤维素降解的影响.结果表明:华西雨屏区天然常绿阔叶林凋落物在夏季分解较快,明显快于其他季节.N沉降显著抑制了阔叶林凋落物的分解,抑制作用随N沉降量的增加而加强.N沉降使凋落物质量损失95%的时间与对照(4.81年)相比增加了0.53～1.88年.经过1 年的分解,中氮沉降和高氮沉降处理木质素和纤维素残留率显著高于对照,表明N沉降显著抑制了凋落物木质素和纤维素的降解.凋落物质量残留率与木质素和纤维素残留率呈显著正相关.N沉降抑制凋落物分解的原因可能是无机N的添加对木质素和纤维素的降解造成了阻碍.     

Alkaline peroxide delignification of agricultural residues to enhance enzymatic saccharification

Approximately one-half of the lignin and most of the hemicellulose present in agricultural residues such as wheat straw and corn stover are solubilized when the residue is treated at 25 degrees C in an alkaline solution of hydrogen peroxide. The delignification reaction is most efficient when the ratio of hydrogen peroxide to substrate is at least 0.25 (w/w) and the pH is 11.5. The supernatant fraction from a given pretreatment, after addition of makeup peroxide and readjustment of the pH, can be recycled to treat at least six additional batches of substrate, resulting in a substantial concentration of hemicellulose and soluble lignin degradation products. Hydrolysis of the insoluble fraction with Trichoderma reesei cellulase after alkaline peroxide treatment yields glucose with almost 100% efficiency, based upon the cellulose content of the residue before treatment. These data indicate that alkaline peroxide pretreatment is a simple and efficient method for enhancing the enzymatic digestibility of lignocellulosic crop residues to levels approaching the theoretical maximum.     

Decoloration of chitosan by UV irradiation

Decoloration of chitosan by UV irradiation, which was used to replace a bleaching step during chitosan preparation, was evaluated under four separate treatments (effect of irradiation time, chitosan/water ratio, stirring speed, and UV light source). The optimal decoloration condition was defined as that producing white chitosan with higher viscosity. Decoloration of chitosan could be achieved effectively using a UV-C light by stirring unbleached chitosan in water (1:8, w/v) for 5 min at 120 rpm. UV irradiation applied under the optimal conditions could be used to produce chitosan with desirable white color (L^* = 76.95, a^* = −0.37, and b^* = 14.04) and high viscosity (1301.7 mPa s at 0.5% w/v in 1.0% v/v acetic acid).     

Simultaneous production of anthocyanin and triterpenoids in suspension cultures of Perilla frutescens

When cultivated in Murashige & Skoog medium supplemented with 0.2 mg l⁻¹ 2,4-dichlorophenoxy acetic acid and 0.5 mg l⁻¹ 6-benzyladenine, Perilla frutescens cells in suspension culture grew rapidly reaching about 13.6 g dry wt l⁻¹ after 12 days. The cell line produced both anthocyanin 0.9 g l⁻¹ and triterpenoids: 16 mg l⁻¹ oleanolic acid (OA), 25 mg l⁻¹ ursolic acid (UA) and 14 mg l⁻¹ tormentic acid (TA). When P. frutescens cells of 7-day-old cultures were exposed to a yeast elicitor at 0.5–5% (v/v) for 7 days, it was found that anthocyanin content peaked at 10.2% of dry weight with yeast elicitor at 1% (v/v) whereas the maximum production of oleanolic acid and ursolic acid in cultures treated with 2% (v/v) yeast elicitor was 19 and 27 mg l⁻¹, a 46 and 24% increase over the control, respectively. This is the first report of simultaneous production of both anthocyanin and triterpenoids in a single culture system.