Rapid homogeneous lauroylation of wheat straw hemicelluloses under mild conditions

Hemicellulose-based hydrophobic biomaterials with degrees of substitution ranging from 0.46 to 1.54 were synthesized under mild conditions in homogeneous media (N,N-dimethylformamide-lithium chloride) by reacting the native wheat straw hemicellulosic polymers with lauroyl chloride using 4-dimethylaminopyridine as a catalyst. Other catalysts such as N-bromosuccinimide, N-methyl pyrrolidine, N-methyl pyrrolidinone, and pyridine were also investigated. Under optimum reaction conditions (2 equiv of lauroyl chloride and triethylamine per hydroxyl group, 5% 4-dimethylaminopyridine, 40 °C, 35 min), a high DS value of 1.54 was obtained. The biomaterials were characterized by FT-IR spectroscopy and ¹³C NMR spectroscopy as well as by thermal analysis. The results showed that the lauroylation occurred preferably at the C-3 hydroxyl group of β-d-Xylp units in the hemicelluloses, and the thermal stability of the hydrophobic polymers increased by esterification.     

Chlorination and phosphorylation of cotton cellulose by reaction with phosphoryl chloride in N,N-dimethylformamide

Native cotton yarn reacts rapidly with phosphoryl chloride in N,N-dimethylformamide to produce highly chlorinated cellulose (degree of substitution of 0.5 or greater), phosphorylated cellulose, and cellulose formate. The ratio of chlorination to phosphorylation was readily controlled by varying the concentration of phosphoryl chloride in N,N-dimethylformamide.Reaction variables studied were the reagent concentration, reaction temperature, and reaction time. The effect that each of these variables has on the tensile and flammability properties of the resultant yarns was investigated. Yarns containing large proportions of chlorine have high tensile-strength and are unusually extensible, whereas yarns containing phosphorus have high flame-resistance. A mechanism for the selective chlorination or phosphorylation of the cotton cellulose is advanced.     

Enhancement of enzymatic saccharification of cellulose by cellulose dissolution pretreatments

Attempts were made to enhance cellulose saccharification by cellulase using cellulose dissolution as a pretreatment step. Four cellulose dissolution agents, NaOH/Urea solution, N-methylmorpholine-N-oxide (NMMO), ionic liquid (1-butyl-3-methylimidazolium chloride; [BMIM]Cl) and 85% phosphoric acid were employed to dissolve cotton cellulose. In comparison with conventional cellulose pretreatment processes, the dissolution pretreatments were operated under a milder condition with temperature <130 °C and ambient pressure. The dissolved cellulose was easily regenerated in water. The regenerated celluloses exhibited a significant improvement (about 2.7- to 4.6-fold enhancement) on saccharification rate during 1st h reaction. After 72 h, the saccharification yield ranged from 87% to 96% for the regenerated celluloses while only around 23% could be achieved for the untreated cellulose. Even with high crystallinity, cellulose regenerated from phosphoric acid dissolution achieved the highest saccharification rates and yield probably due to its highest specific surface area and lowest degree of polymerization (DP).     

Blend miscibility of cellulose propionate with poly(N-vinyl pyrrolidone-co-methyl methacrylate)

The blend miscibility of cellulose propionate (CP) with poly(N-vinyl pyrrolidone-co-methyl methacrylate) (P(VP-co-MMA)) was investigated. The degree of substitution (DS) of CP used ranged from 1.6 to >2.9, and samples for the vinyl polymer component were prepared in a full range of VP:MMA compositions. Through DSC analysis and solid-state ¹³C NMR and FT-IR measurements, we revealed that CPs of DS < 2.7 were miscible with P(VP-co-MMA)s of VP ≥ ∼10 mol% on a scale within a few nanometers, in virtue of hydrogen-bonding interactions between CP-hydroxyls and VP-carbonyls. When the DS of CP exceeded 2.7, the miscibility was restricted to the polymer pairs using P(VP-co-MMA)s of VP = ca. 10–40 mol%; the scale of mixing in the blends concerned was somewhat larger (ca. 5–20 nm), however. The appearance of such a “miscibility window” was interpretable as an effect of intramolecular repulsion in the copolymer component. Results of DMA and birefringence measurements indicated that the miscible blending of CP with the vinyl polymer invited synergistic improvements in thermomechanical and optical properties of the respective constituent polymers. Additionally, it was found that the VP:MMA composition range corresponding to the miscibility window was expanded by modification of the CP component into cellulose acetate propionate.     

Comb-shaped graft copolymers with cellulose side-chains prepared via click chemistry

Comb-shaped copolymers with cellobiose acetate or cellulose triacetate (CTA) side-chains, PPMA-g-(CTA2-C15) and PPMA-g-(CTA13-C15), were prepared by grafting N-(15-azidopentadecanoyl)-2,3,6-tri-O-acetyl-4-O-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)-β-d-glucopyranosylamine (CTA2-C15-N₃) and N-(15-azidopentadecanoyl)-tri-O-acetyl-β-cellulosylamine (CTA13-C15-N₃, number average degree of polymerization (DP_n) = 13) onto poly(2-propyn-1-yl methacrylate) (PPMA, weight average degree of polymerization (DP_w, X + Y = 5.59 × 10²)) via “click chemistry”. The copolymers were characterized by ¹H, ¹³C and two-dimensional NMR and size exclusion chromatography-multi-angle laser light scattering (SEC-MALS) measurements. The numbers of CTA side-chains (X) of PPMA-g-(CTA2-C15) and PPMA-g-(CTA13-C15) were calculated as 4.03 × 10² and 2.45 × 10², respectively. Copolymers with cellulosic side-chains, PPMA-g-(CELL2-C15) and PPMA-g-(CELL13-C15), were successfully obtained after deacetylation of PPMA-g-(CTA2-C15) and PPMA-g-(CTA13-C15), respectively. X-ray diffraction measurements revealed that PPMA-g-(CELL13-C15) showed crystalline pattern of cellulose II, which is believed to have anti-parallel orientation.     

A re-investigation of saliva collection procedures that highlights the risk of potential positive interference in cortisol immunoassay

Background

The use of saliva for measurement of cortisol permits non-invasive study of adrenal function, but collection can be technically difficult, particularly in small infants. Saliva collection can be assisted by citric acid to increase saliva flow, or by the use of cotton or polyester swabs in the mouth.

Aim

To determine whether different methods of saliva collection affect cortisol radioimmunoassay (RIA) performance.

Experimental

Cortisol was measured in saliva collected from 16 adults using intra-oral cotton swabs or polyester swabs, compared with saliva dribbled directly into a pot either alone (plain saliva) or after citric acid had been placed on the tongue. An in-house RIA, without prior extraction, was used to measure cortisol with an encapsulated sheep antibody.

Results

Mean (median) salivary cortisol was 10.9 (10.5) nmol L⁻¹ in plain saliva, 10.4 (8.4) nmol L⁻¹ in citric acid stimulated saliva; 25.3 (25.1) nmol L⁻¹ in saliva collected on cotton swabs, and 27.9 (27.3) nmol L⁻¹ collected on polyester swabs. Cortisol in saliva collected using citric acid was not significantly different from plain saliva (p = 0.997), but cortisol in saliva collected using cotton and polyester swabs was significantly higher than that of plain saliva (p < 0.01).

Conclusion

The use of cotton or polyester swabs for collection of saliva can result in spuriously high levels of cortisol when measured by RIA.     

A novel thermotropic liquid crystalline – Benzoylated bacterial cellulose

Using the esterification of bacterial cellulose (BC), we have synthesized Benzoylated bacterial cellulose (BBC). The molecular structure of the BBC was characterized by means of Fourier transform infrared (FT-IR) spectroscopy, ¹H and ¹³C nuclear magnetic resonance (NMR). The BBC is found to display thermotropic liquid crystalline feature determined with differential scanning calorimetry (DSC), polarized optical microscope (POM) and wide-angle X-ray diffraction (WAXD). Here, we demonstrate that it is possible to obtain the BBC with degree of substitution (DS) from 0.88 to 2.46 by applying the different molar ratio of benzoyl chloride to the anhydrous glucose unit (AGU). The glass transition temperatures (T_g) of the liquid crystalline phases lie between 281.2 and 281.8 °C and the isotropic melt transition temperatures (T_i) vary from 341.6 to 362.8 °C, depending on the DS.     

Synthesis and characterization of quaternized β-chitin

Water-soluble 2′-O-hydroxypropyltrimethylammoniumchitin chloride (2′-O-HTACCt) was prepared directly from β-chitin and 3-chloro-2-hydroxypropyltrimethylammonium chloride (CTA) in basic medium. The effect of alkali concentration, reaction temperature, reaction time, and dosage of CTA on yield and degree of substitution (DS) of 2′-O-HTACCt were studied. These quaternized chitin derivatives were characterized by FTIR and ¹H NMR spectroscopy, conductometric titration, and elemental analysis methods. Research results indicate that β-chitin can react directly with CTA to produce a water-soluble 2′-O-HTACCt derivative with a high DS. The optimal preparation conditions were determined to be 35-40 wt % (aq NaOH), 40 °C (reaction temperature), 6 h (reaction time), and 4 (molar ratio of CTA to β-chitin unit).     

Morphological and physiological adaptive traits of Mediterranean narrow endemic plants: The case of Centaurea gymnocarpa (Capraia Island,Italy)

A case study on Centaurea gymnocarpa Moris & De Not., a narrow endemic species, was carried out by analyzing its morphological, anatomical, and physiological traits in response to natural habitat stress factors under Mediterranean climate conditions. The results underline that the species is particularly adapted to the environment where it naturally grows. At the plant level, the above-ground/below-ground dry mass (1.73 ± 0.60) shows its investment predominately in the above-ground structure with a resulting total leaf area per plant of 1399 ± 94 cm². The senescent attached leaves at the base of the plant contribute to limit leaf transpiration by shading soil around the plant. Moreover, the dense C. gymnocarpa leaf pubescence, leaf rolling, the relatively high leaf mass area (LMA = 12.3 ± 1.3 mg cm⁻²) and leaf tissue density (LTD = 427 ± 44 mg cm⁻³) contribute to limit leaf transpiration, also postponing leaf death under dry conditions. At the physiological level, a relatively low respiration/photosynthesis ratio (R/P_N) in spring results from high R [2.26 ± 0.59 μmol (CO₂) m⁻² s⁻¹] and P_N [12.3 ± 1.5 μmol (CO₂) m⁻² s⁻¹]. The high photosynthetic nitrogen use efficiency [PNUE = 15.5 ± 0.4 μmol (CO₂) g⁻¹ (N) s⁻¹] shows the large amount of nitrogen (N) invested in the photosynthetic machinery of new leaves, associated to a high chlorophyll content (Chl = 35 ± 5 SPAD units). On the contrary, the highest R/P_N ratio (1.75 ± 0.19) in summer is due to a significant P_N decrease and increase of R in response to drought. The low PNUE [1.5 ± 0.2 μmol (CO₂) g⁻¹ (N) s⁻¹] in this season is indicative of a greater N investment in leaf cell walls which may contribute to limit transpiration. On the contrary, the low R/P_N ratio (0.05 ± 0.02) in winter is resulting from the limited enzyme activity of the respiratory apparatus [R = 0.23 ± 0.08 μmol (CO₂) m⁻² s⁻¹] while the low PNUE [3.5 ± 0.2 μmol (CO₂) g⁻¹ (N) s⁻¹] suggests that low temperatures additionally limit plant production. The experiment of the imposed water stress confirms that the C. gymnocarpa growth capability is in conformity with the severe conditions of its natural habitat, likewise as it may be the case with others narrow endemic species that have occupied niches with similar extreme conditions.     

Impact of COD/N ratio on nitrous oxide emission from microcosm wetlands and their performance in removing nitrogen from wastewater

Constructed wetlands (CWs) are considered to be important sources of nitrous oxide (N₂O). In order to investigate the effect of influent COD/N ratio on N₂O emission and control excess emission from nitrogen removal, free water surface microcosm wetlands were used and fed with different influent. In addition, the transformation of nitrogen was examined for better understanding of the mechanism of N₂O production under different operating COD/N ratios. It was found that N₂O emission and the performance of microcosm wetlands were significantly affected by COD/N ratio of wastewater influent. Strong relationships exist between N₂O production rate and nitrite (r = 0.421, p < 0.01). During denitrification process, DO concentration crucially influences N₂O production rate. An optimal influent COD/N ratio was obtained by adjusting external carbon sources for most effective N₂O emission control and best performance of the CWs in nitrogen removal from wastewater. It is concluded that under the operating condition of COD/N ratio = 5, total N₂O emission is minimum and the microcosm wetland is most effective in wastewater nitrogen removal.     

Antifungal property of quaternized chitosan and its derivatives

Five water-soluble chitosan derivatives were carried out by quaternizing either iodomethane or N-(3-chloro-2-hydroxypropyl) trimethylammonium chloride (Quat188) as a quaternizing agent under basic condition. The degree of quaternization (DQ) ranged between 28 ± 2% and 90 ± 2%. The antifungal activity was evaluated by using disc diffusion method, minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) methods against Trichophyton rubrum (T. rubrum), Trichophyton mentagrophyte (T. mentagrophyte), and Microsporum gypseum (M. gypseum) at pH 7.2. All quaternized chitosans and its derivatives showed more effective against T. rubrum than M. gypseum and T. mentagrophyte. The MIC and MFC values were found to range between 125-1000 μg/mL and 500-4000 μg/mL, respectively against all fungi. Our results indicated that the quaternized N-(4-N,N-dimethylaminocinnamyl) chitosan chloride showed highest antifungal activity against T. rubrum and M. gypseum compared to other quaternized chitosan derivatives. The antifungal activity tended to increase with an increase in molecular weight, degree of quaternization and hydrophobic moiety against T. rubrum. However, the antifungal activity was depended on type of fungal as well as chemical structure of the quaternized chitosan derivatives.     

Anaerobic degradation of tetrachlorobisphenol-A in river sediment

This study investigated the anaerobic degradation of tetrachlorobisphenol-A (TCBPA) in sediment samples collected at three sites along the Erren River in southern Taiwan. TCBPA anaerobic degradation half-lives (t_1/2) in the sediment were 12.6, 16.9 and 21.7 d at concentrations of 50, 100, and 250 ??g g⁻¹, respectively. TCBPA (50 ??g g⁻¹) anaerobic degradation half-lives (t_1/2) in the sediment were 10.1, 11.8, 11.0, 11.6, 10.8, 9.1, 8.5, 18.2, 19.3, and 16.1 d by the addition of yeast extract (5 mg l⁻¹), cellulose (0.96 mg l⁻¹), sodium chloride (1%), brij 30 (130 mg l⁻¹), brij 35 (43 mg l⁻¹), rhamnolipid (55 ??M), surfactin (91 ??M), phthalic esters (2 mg l⁻¹), nonylphenol (2 mg l⁻¹), and heavy metals (2 mg l⁻¹), respectively. The degradation rate of TCBPA was enhanced by the addition of yeast extract, cellulose, sodium chloride, brij 30, brij 35, rhamnolipid, or surfactin. However, it was inhibited by the addition of phthalic esters, nonylphenol, or heavy metals. Also noted was the presence of dichlorobisphenol-A and bisphenol-A, two intermediate products resulting from the anaerobic degradation of TCBPA accumulated in the sediments.     

Growth and nitrogen acquisition strategies of Acacia senegal seedlings under exponential phosphorus additions

There remains conflicting evidence on the relationship between P supply and biological N₂-fixation rates, particularly N₂-fixing plant adaptive strategies under P limitation. This is important, as edaphic conditions inherent to many economically and ecologically important semi-arid leguminous tree species, such as Acacia senegal, are P deficient. Our research objective was to verify N acquisition strategies under phosphorus limitations using isotopic techniques. Acacia senegal var. senegal was cultivated in sand culture with three levels of exponentially supplied phosphorus [low (200 μmol of P seedling⁻¹ over 12 weeks), mid (400 μmol) and high (600 μmol)] to achieve steady-state nutrition over the growth period. Uniform additions of N were also supplied. Plant growth and nutrition were evaluated. Seedlings exhibited significantly greater total biomass under high P supply compared to low P supply. Both P and N content significantly increased with increasing P supply. Similarly, N derived from solution increased with elevated P availability. However, both the number of nodules and the N derived from atmosphere, determined by the ¹⁵N natural abundance method, did not increase along the P gradient. Phosphorus stimulated growth and increased mineral N uptake from solution without affecting the amount of N derived from the atmosphere. We conclude that, under non-limiting N conditions, A. senegal N acquisition strategies change with P supply, with less reliance on N₂-fixation when the rhizosphere achieves a sufficient N uptake zone.     

Aqueous solution chemistry of dichloro[S-methylcysteine(N,S)]platinum(II) isomers and their hydrolysis products

Rate and equilibrium constants at 25 °C, pH ∼ 1, and ionic strength 0.10 for hydrolysis of the two non-equivalent chlorides of dichloro[S-methyl-l-cysteine(N,S)]platinum(II) isomers, denoted [PtCl₂(SmecysH)], and the resultant chloro-aqua species have been determined by NMR, potentiometric, and spectrophotometric methods. Though hydrolysis constants, K_h, for the two chlorides are similar (pK_h = 4-5), the rate of hydrolysis of the chloride trans to coordinated S, k_h = 3.4 × 10⁻³ s⁻¹, is 2-3 orders of magnitude faster than the k_h for the other chloride, 2.3 × 10⁻⁶ s⁻¹, and for the cancer drug cisplatin, cis-[PtCl₂(NH₃)₂], 5.2 × 10⁻⁵ s⁻¹. Relative rates of hydrolysis determined under three different experimental conditions (pH ∼ 1 in 0.10 M HNO₃, high pH in 0.10 M NaOH, and at low pH with Ag⁺ assistance) are consistent: the Cl trans to S is 100-1000 times more labile than the Cl cis to S. Potentiometric and NMR methods were also used to estimate pK_a values of all aqua species, which are comparable to values reported for corresponding aqua species derived from cisplatin.     

Nanoheterogeneous catalytic hydrogenation of N-, O- or S-heteroaromatic compounds by re-usable aqueous colloidal suspensions of rhodium(0)

The hydrogenation of various nitrogen-, oxygen- or sulfur-heterocyclic aromatic compounds by various surfactant-stabilized aqueous rhodium(0) colloidal suspensions was investigated. The nanocatalysts in the size range of 2.1-2.4 nm have been synthesized by reducing RhCl₃ · 3H₂O with sodium borohydride and were stabilized by highly water soluble N,N-dimethyl-N-cetyl-N-(2-hydroxyethyl)ammonium bromide or chloride salts. The catalytic reactions were performed under mild reaction conditions, namely room temperature and under atmospheric hydrogen pressure. The influence of the bromide or chloride nature of the surfactant counter-ion on the recycling of the aqueous phase containing the Rh(0) particles was studied.     

Investigations about dissolution of cellulose in the 1-allyl-3-alkylimidazolium chloride ionic liquids

In this work, the 1-allyl-3-alkylimidazolium chloride ionic liquids were synthesized and characterized by increasing carbon atoms (n ≤ 6) of alkyl chains on a cationic 3-imidazole ring. The results indicated that 1-allyl-3-alkylimidazolium chloride with asymmetrical structure on the two sides of a cationic 3-imidazole ring (i.e., n = 1, 2, 6) exhibited alkalinity and lower thermal stabilities, and showed better solubility to the cellulose samples at 60-120 °C than those with symmetrical structures (n = 3, 4). The cellulose samples treated by 20% (w/w) ethylenediamine solution showed better solubility in 1-allyl-3-ethyl, hexyl-imidazolium chloride ionic liquids than that treated with 20% (w/w) NaOH solution at 5 °C for 72 h. XRD and TG analysis indicated that 0 0 2 plane apparent crystallite size as well as thermal stability of the regenerated cellulose samples from the ionic liquids decreased significantly compared with the untreated cellulose samples.     

Characterization and antimicrobial activity of water-soluble N-(4-carboxybutyroyl) chitosans against some plant pathogenic bacteria and fungi

Water-soluble N-(4-carboxybutyroyl) chitosan derivatives with different degrees of substitution (DS) were synthesized to enhance the antimicrobial activity of chitosan molecule against plant pathogens. Chitosan in a solution of 2% aqueous acetic acid-methanol (1:1, v/v) was reacted with 0.1, 0.3, 0.6 and 1 mol of glutaric anhydride to give N-(4-carboxybutyroyl) chitosans at DS of 0.10, 0.25, 0.48 and 0.53, respectively. The chemical structures and DS were characterized by ¹H and ¹³C NMR spectroscopy, which showed that the acylate reaction took place at the N-position of chitosan. The synthesized derivatives were more soluble than the native chitosan in water and in dilute aqueous acetic acid and sodium hydroxide solutions. The antimicrobial activity was in vitro investigated against the most economic plant pathogenic bacteria of Agrobacterium tumefaciens and Erwinia carotovora and fungi of Botrytis cinerea, Pythium debaryanum and Rhizoctonia solani. The antimicrobial activity of N-(4-carboxybutyroyl) chitosans was strengthened than the un-modified chitosan with the increase of the DS. A compound of DS 0.53 was the most active one with minimum inhibitory concentration (MIC) of 725 and 800 mg/L against E. carotovora and A. tumefaciens, respectively and also in mycelial growth inhibiation against B. cinerea (EC₅₀ = 899 mg/L), P. debaryanum (EC₅₀ = 467 mg/L) and R. solani (EC₅₀ = 1413 mg/L).     

Deficit irrigation for enhancing sustainable water use: Comparison of cotton nitrogen uptake and prediction of lint yield in a multivariate autoregressive state-space model

Deficit irrigation is an optimization strategy for achieving sustainability of irrigated crop production. A field-study of cotton (Gossypium hirsutum L.) response to a limited water supply was conducted in an Alfisol in the southern High Plains of Texas. The objectives were to investigate cotton N uptake, canopy temperature, plant spectral index and lint yield variation under deficit irrigation and to provide information for enhancing sustainability of the water resources and Alfisols in the semi-arid environment. The experimental treatments were two deficit-irrigation levels at 50% and 75% of cotton evapotranspiration (ET). Plant and soil variables were measured 15 m apart along the center-pivot irrigation circles. The results show that cotton plants under the 50%-ET deficit irrigation level were 21% more water stressed (P < 0.05) based on the reflectance water index ratio. The 50%-ET irrigation resulted in a 25% lint yield loss with a 33% water saving compared to the higher irrigation level (75%-ET). Plant reflectance, canopy temperature, total N uptake and lint yield were correlated with normalized difference vegetative index (NDVI), soil water content (SWC), soil NO₃-N concentrations and elevation (−0.69 < r < 0.72, P < 0.05, respectively). Future cotton lint yield is weighted on NDVI and water variation, quantified in a multivariate autoregressive state-space model. Increases in plant reflectance in the water band are signs of early plant water stress. Compared to the 12-year regional cotton lint yield obtained with full irrigation, the 75%-ET deficit irrigation would be agronomical, economical efficient in Alfisoils with only 7.8% of lint-yield loss from water stress but 25% of water saving for sustainable water use.     

Biodegradable superabsorbent hydrogels derived from cellulose by esterification crosslinking with 1,2,3,4-butanetetracarboxylic dianhydride

Superabsorbent hydrogels were prepared from native celluloses dissolved in lithium chloride and N-methyl-2-pyrrolidinone (LiCl/NMP) by esterification crosslinking with 1,2,3,4-butanetetracarboxylic dianhydride (BTCA). Subsequent conversion of the unreacted carboxyl groups to sodium carboxylates by the addition of aqueous NaOH was performed to enhance the water affinity of the gels. The absorbency of the products was strongly dependent on the amount of BTCA that was esterified to cellulose, and the highest absorbency was observed for the hydrogel composed of approximately 0.25 molecules of BTCA per anhydroglucose unit (AGU) of cellulose. Furthermore, it was confirmed that the absorbency was enhanced as the average degree of polymerization (DP) of the starting cellulose increased. The use of cotton cellulose with a high DP of about 2400 produced a hydrogel with an absorbency of 720 times its dry weight, which exceeded the absorbency of commercial crosslinked sodium polyacrylate superabsorbent hydrogel (SPA). The hydrogels exhibited good biodegradability, with a maximum degradation of 95% within 7 days using cellulase.     

Iron-oxidation-state-dependent O-O bond cleavage of meta-chloroperbenzoic acid to form an iron(IV)-oxo complex

The mechanism of formation of [Fe^IV(O)(N4Py)]²⁺ (2, N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) from the reaction of [Fe^II(N4Py)(CH₃CN)]²⁺ (1) with m-chloroperbenzoic acid (mCPBA) in CH₂Cl₂ at −30 °C has been studied on the basis of the visible spectral changes observed and the reaction stoichiometry. It is shown that the conversion of 1 to 2 in 90% yield requires 1.5 equiv. peracid and takes place in two successive one-electron steps via an [Fe^III(N4Py)OH]²⁺(3) intermediate. The first oxidation step uses 0.5 equiv. peracid and produces 0.5 equiv. 3-chlorobenzoic acid, while the second step uses 1 equiv. peracid and affords byproducts derived from chlorophenyl radical. We conclude that the Fe^II(N4Py) center promotes O-O bond heterolysis, while the Fe^III(N4Py) center favors O-O bond homolysis, so the nature of O-O bond cleavage is dependent on the iron oxidation state.