Synthesis,characterization and antifungal activity of quaternary derivatives of chitosan on Aspergillus flavus

Two series of new chitosan derivatives were synthesized by reaction of deacetylated chitosan (CH) with propyl (CH-Propyl) and pentyl (CH-Pentyl) trimethylammonium bromides to obtain derivatives with increasing degrees of substitution (DS). The derivatives were characterized by ¹H NMR and potentiometric titration techniques and their antifungal activities on the mycelial growth of Aspergillus flavus were investigated in vitro. The antifungal activities increase with DS and the more substituted derivatives of both series, CH-Propyl and CH-Pentyl, exhibited antifungal activities respectively three and six times higher than those obtained with commercial and deacetylated chitosan. The minimum inhibitory concentrations (MIC) were evaluated at 24, 48 and 72 h by varying the polymer concentration from 0.5 to 16 g/L and the results showed that the quaternary derivatives inhibited the fungus growth at polymer concentrations four times lower than that obtained with deacetylated chitosan (CH). The chitosans modified with pentyltrimethylammonium bromide exhibited higher activity and results are discussed taking into account the degree of substitution (DS).     

Characterization and antimicrobial activity of water-soluble N-(4-carboxybutyroyl) chitosans against some plant pathogenic bacteria and fungi

Water-soluble N-(4-carboxybutyroyl) chitosan derivatives with different degrees of substitution (DS) were synthesized to enhance the antimicrobial activity of chitosan molecule against plant pathogens. Chitosan in a solution of 2% aqueous acetic acid-methanol (1:1, v/v) was reacted with 0.1, 0.3, 0.6 and 1 mol of glutaric anhydride to give N-(4-carboxybutyroyl) chitosans at DS of 0.10, 0.25, 0.48 and 0.53, respectively. The chemical structures and DS were characterized by ¹H and ¹³C NMR spectroscopy, which showed that the acylate reaction took place at the N-position of chitosan. The synthesized derivatives were more soluble than the native chitosan in water and in dilute aqueous acetic acid and sodium hydroxide solutions. The antimicrobial activity was in vitro investigated against the most economic plant pathogenic bacteria of Agrobacterium tumefaciens and Erwinia carotovora and fungi of Botrytis cinerea, Pythium debaryanum and Rhizoctonia solani. The antimicrobial activity of N-(4-carboxybutyroyl) chitosans was strengthened than the un-modified chitosan with the increase of the DS. A compound of DS 0.53 was the most active one with minimum inhibitory concentration (MIC) of 725 and 800 mg/L against E. carotovora and A. tumefaciens, respectively and also in mycelial growth inhibiation against B. cinerea (EC₅₀ = 899 mg/L), P. debaryanum (EC₅₀ = 467 mg/L) and R. solani (EC₅₀ = 1413 mg/L).     

Synthesis, characterization, and antifungal activity of novel quaternary chitosan derivatives

Three novel quaternary chitosan derivatives were successfully synthesized by reaction of chloracetyl chitosan (CACS) with pyridine (PACS), 4-(5-chloro-2-hydroxybenzylideneamino)-pyridine (CHPACS), and 4-(5-bromo-2-hydroxybenzylideneamino)-pyridine (BHPACS). The chemical structure of the prepared chitosan derivatives was confirmed by Fourier transform infrared (FT-IR) and ¹³C nuclear magnetic resonance (¹³C NMR) and their antifungal activity against Cladosporium cucumerinum, Monilinia fructicola, Colletotrichum lagenarium, and Fusarium oxysporum was assessed. Comparing with the antifungal activity of chitosan, CACS, and PACS, CHPACS and BHPACS exhibited obviously better inhibitory effects, which should be related to the synergistic reaction of chitosan itself with the grafted 2-[4-(5-chloro-2-hydroxybenzylideneamino)-pyridyl]acetyl and 2-[4-(5-bromo-2-hydroxybenzylideneamino)-pyridyl]acetyl.     

Preparation and structure of chitosan soluble in wide pH range

Two kinds of chitosans, namely N-acetylated and N-deacetylated chitosan were prepared by the modified processes. They can dissolve in both acid and alkali solution. ¹³C NMR was used to study the basic solution of chitosan, and XRD, FT-IR and SEM were used to study the structure of N-acetylated and N-deacetylated chitosan. The result from X-ray diffraction showed that a transformation of crystal structure occurred during the N-acetylation or N-deacetylation process with the decrease of crystallinity and expansion of crystal lattices. FT-IR spectra revealed that the intermolecular and intramolecular hydrogen bonds were destroyed by both treatments and a looser structure was observed by the SEM. The lower crystallinity, the decreased intermolecular interactions, the more disordered and looser structure were easy for the permeation of LiOH/urea aqueous solution and coordinated with the breakage of intermolecular and intramolecular hydrogen bond by LiOH at low temperature, the prepared chitosans dissolved in LiOH/urea/H₂O mixture.     

Synthesize and characterization of organic-soluble acylated chitosan

Acylated chitosan was synthesized by reaction of chitosan and stearoyl chloride. The chemical structures and physical properties of the prepared compounds were confirmed by Fourier transform infrared (FT-IR), ¹H Nuclear Magnetic Resonance (¹H NMR) spectroscopy, X-ray diffraction (XRD) and Thermogravimetric (TG) techniques. The degree of substitution (DS) was calculated by ¹H NMR and ranged from 1.8 to 3.8. The synthesized compounds exhibited an excellent solubility in organic solvents. XRD analysis showed that they had high crystalline structure. TG results demonstrated that thermal stability of the prepared compounds was lower than that of chitosan, the weight loss decreased with increase of DS. This procedure could be a facile method to prepare organic-soluble chitosan derivatives.     

Physicochemical characterization of chitin and chitosan from crab shells

Crab chitosan was prepared by alkaline N-deacetylation of crab chitin for 60, 90 and 120 min and the yields were 30.0-32.2% with that of chitosan C120 being the highest. The degree of N-deacetylation of chitosans (83.3–93.3%) increased but the average molecular weight (483–526 kDa) decreased with the prolonged reaction time. Crab chitosans showed lower lightness and WI values than purified chitin, chitosans CC and CS but higher than crude chitin. With the prolonged reaction time, the nitrogen (8.9–9.5%), carbon (42.2–45.2%) and hydrogen contents (7.9–8.6%) in chitosans prepared consistently increased whereas N/C ratios remained the same (0.21). Crab chitosans prepared showed a melting endothermic peak at 152.3–159.2 °C. Three chitosans showed similar microfibrillar crystalline structure and two crystalline reflections at 2θ = 8.8–9.0° and 18.9–19.1°. Overall, the characteristics of three crab chitosans were unique and differed from those of chitosan CC and CS as evidenced by the element analysis, differential scanning calorimetry, scanning electron microscopy and X-ray diffraction patterns.     

Synthesis, characterization, and antibacterial activity of N,O-quaternary ammonium chitosan

N,N,N-Trimethyl O-(2-hydroxy-3-trimethylammonium propyl) chitosans (TMHTMAPC) with different degrees of O-substitution were synthesized by reacting O-methyl-free N,N,N-trimethyl chitosan (TMC) with 3-chloro-2-hydroxy-propyl trimethyl ammonium chloride (CHPTMAC). The products were characterized by ¹H NMR, FTIR and TGA, and investigated for antibacterial activity against Staphylococcus aureus and Escherichia coli under weakly acidic (pH 5.5) and weakly basic (pH 7.2) conditions. TMHTMAPC exhibited enhanced antibacterial activity compared with TMC, and the activity of TMHTMAPC increased with an increase in the degree of substitution. Divalent cations (Ba²⁺ and Ca²⁺) strongly reduced the antibacterial activity of chitosan, O-carboxymethyl chitosan and N,N,N-trimethyl-O-carboxymethyl chitosan, but the repression on the antibacterial activity of TMC and TMHTMAPC was weaker. This indicates that the free amino group on chitosan backbone is the main functional group interacting with divalent cations. The existence of 100 mM Na⁺ slightly reduced the antibacterial activity of both chitosan and its derivatives.     

Synthesis and characterization of N-aryl chitosan derivatives

Selective N-arylation of chitosan was performed via a Schiff bases formed by the reaction between the 2-amino group of glucosamine residue of chitosan with an aromatic aldehyde under acidic condition followed by reduction of the Schiff base intermediate with sodium cyanoborohydride (Borch reduction). Aromatic aldehydes bearing either an electron donating or electron withdrawing substituent were used. The chemical structures and thermal properties of the N-aryl chitosans were characterized by FT-IR, (1)H NMR, (13)C NMR, TGA, and DSC. The extent of N-substitution (ES) was influenced by the molar ratio of the aldehyde to the glucosamine residue of chitosan, the reaction time and the substituent on the aromatic ring. Lower ESs resulted from N-arylation using an aldehyde with an electron donating substituent. A linear relationship between the targeted ES and the ES obtained was observed when aldehydes bearing electron withdrawing substituents were employed.     

Preparation and important functional properties of water-soluble chitosan produced through Maillard reaction

The objective of this research was to improve the solubility of chitosan at neutral or basic pH using the Maillard-type reaction method. To prepare the water-soluble chitosans, various chitosans and saccharides were used under various operating conditions. Biological and physicochemical properties of the chitosan-saccharide derivatives were investigated as well. Results indicated that the solubility of modified chitosan is significantly greater than that of native chitosan, and the chitosan-maltose derivative remained soluble when the pH approached 10. Among chitosan-saccharide derivatives, the solubility of chitosan-fructose derivative was highest at 17.1 g/l. Considering yield, solubility and pH stability, the chitosan-glucosamine derivative was deemed the optimal water-soluble derivative. Compared with the acid-soluble chitosan, the chitosan-glucosamine derivative exhibited high chelating capacity for Zn(2+), Fe(2+) and Cu(2+) ions. Relatively high antibacterial activity against Escherichia coli and Staphylococcus aureus was noted for the chitosan-glucosamine derivative as compared with native chitosan. Results suggest that the water-soluble chitosan produced using the Maillard reaction may be a promising commercial substitute for acid-soluble chitosan.     

Synthesis and anticoagulant activity of the quaternary ammonium chitosan sulfates

Quaternary ammonium chitosan sulfates with diverse degrees of substitution (DS) ascribed to sulfate groups between 0.52 and 1.55 were synthesized by reacting quaternary ammonium chitosan with an uncommon sulfating agent (N(SO₃Na)₃) that was prepared from sodium bisulfite (NaHSO₃) through reaction with sodium nitrite (NaNO₂) in the aqueous system homogeneous. The structures of the derivatives were characterized by FTIR, ¹H NMR and ¹³C NMR. The factors affecting DS of quaternary ammonium chitosan sulfates which included the molar ratio of NaNO₂ to quaternary ammonium chitosan, sulfated temperature, sulfated time and pH of sulfated reaction solution were investigated in detail. Its anticoagulation activity in vitro was determined by an activated partial thromboplastin time (APTT) assay, a thrombin time (TT) assay and a prothrombin time (PT) assay. Results of anticoagulation assays showed quaternary ammonium chitosan sulfates significantly prolonged APTT and TT, but not PT, and demonstrated that the introduction of sulfate groups into the quaternary ammonium chitosan structure improved its anticoagulant activity obviously. The study showed its anticoagulant properties strongly depended on its DS, concentration and molecular weight.     

Photo-polymeriable chitosan derivative prepared by Michael reaction of chitosan and polyethylene glycol diacrylate (PEGDA)

N-Alkyled photo-polymeriable chitosan derivative (PEGDA-CS) was synthesized by Michael reaction of chitosan and polyethylene glycol diacrylate (PEGDA) under mild reaction conditions. The chemical structure and physical properties of PEGDA-CS were characterized by FT-IR, ¹H NMR, XRD and TG techniques. The degree of substitution (DS) of PEGDA-CS could be calculated from ¹H NMR. PEGDA-CS exhibited good solubility in distilled water. XRD analysis showed that PEGDA-CS was amorphous. TG results demonstrated that thermal stability of the derivate was lower than that of chitosan. Antimicrobial test showed that PEGDA-CS had the antimicrobial activity on Escherichia coli. It could photopolymerize under ultraviolet light with 2959 as initiator.     

Molecular weight and pH effects of aminoethyl modified chitosan on antibacterial activity in vitro

Aminoethyl modified chitosan derivatives (AEMCSs) with different molecular weight (Mw) were synthesized by grafting aminoethyl group on different molecular weight chitosans and chitooligosaccharide. FTIR, (1)H NMR, (13)C NMR, elemental analysis and potentiometric titration results showed that branched polyethylimine chitosan was synthesized. Clinical Laboratory Standard Institute (CLSI) protocols were used to determine MIC for Gram-negative strain of Escherichia coli under different pH. The antibacterial activity of the derivatives was significantly improved compared with original chitosans, with MIC values against E. coli varying from 4 to 64 μg/mL depending on different Mw and pH. High molecular weight seems to be in favor of stronger antibacterial activity. At pH 7.4, derivatives with Mw above 27 kDa exhibited equivalent antibacterial activity (16 μg/mL), while oligosaccharide chitosan derivative with lower Mw (~1.4 kDa) showed decreased MIC of 64 μg/mL. The effect of pH on antibacterial activity is more complicated. An optimal pH for HAEMCS was found around 6.5 to give MIC as low as 4 μg/mL, while higher or lower pH compromised the activity. Cell integrity assay and SEM images showed evident cell disruption, indicating membrane disruption may be one possible mechanism for antibacterial activity.     

Obtaining and study of monosaccharide derivatives of low-molecular-weight chitosan

The possibility of obtaining monosaccharide derivatives of low-molecular-weight chitosan with the use of the Maillard reaction was studied. Chitosan derivatives (molecular weight, 24 and 5 kDa) obtained with glucosamine, N-acetyl galactosamine, galactose, and mannose with a substitution degree of 4–14% and a yield of 60–80% were obtained. Some physicochemical and biological properties of these derivatives were studied. We showed that monosaccharide derivatives of low-molecular-weight chitosan exhibited antibacterial activity. Chitosan at a concentration of 0.01% caused 100% death of bacteria B. subtilis and E. coli. The strongest antibacterial effect was exhibited by 24-kDa derivatives: only 0.02–0.08% of cells survived. These derivatives were two orders of magnitude more effective than the 5-kDa chitosan modified with galactose.     

Studies on chitosan: 3. Evidence for the presence of random and block copolymer structures in partially N-acetylated chitosans

The chemical structures of moderately N-deacetylated chitosans (MDC) derived from chitin under heterogeneous reaction conditions and partially N-acetylated chitosans (PAC) derived from highly N-deacetylated chitosans (HDC) under homogeneous reaction conditions were deduced from the data of the stability of their solutions in alkaline media, the swelling behaviour and X-ray diffraction patterns of their films in connection with the degree of N-acetylation of them. The solutions of PAC with more than 51% acetyl content, which were prepared from HDC by N-acetylation, were stable and remained clear and homogeneous by adding 1.2 equivalents of NaOH. On the contrary the solutions of PAC with more than 52% acetyl content, which were prepared from MDC, became turbid by neutralization with less than 1.15 equivalents of NaOH. The films of PAC prepared from HDC were highly swollen in water. The degree of swelling of the chitosan film with 51% acetyl content, prepared from the 6% acetyl content chitosan, was 121% while that of the 53% acetyl content chitosan, prepared from the 30% acetyl content chitosan, was 28%. From these data it was possible to set up a hypothesis that PAC prepared from HDC were considered as random-type copolymers of N-acetyl-glucosamine and glucosamine units whereas MDC were considered as block-type copolymers.     

Selective carboxypropionylation of chitosan: synthesis, characterization, blood compatibility, and degradation

Two water-soluble chitosan (WSC) derivatives of N-succinyl-chitosan (NSCS) and N,O-succinyl-chitosan (NOSCS) with a degree of substitution (DS) that ranged form 0.28 to 0.61 were selectively synthesized by varying the molar ration of succinic anhydride and chitosan. The chemical structure and physical properties of the chitosan derivatives were characterized by FT-IR, ¹H NMR, and XRD. XRD analysis showed that the derivatives were amorphous. The lysozyme enzymatic degradation results revealed that the NSCS was of higher susceptibility to lysozyme. The degradation rate and the solubility of the chitosan derivatives were strongly determined by the degree of substitution and the position of the substitution. The results of antithrombotic properties, hemolytic properties and anticoagulant properties of WSCs indicated that the blood compatibility was dramatically improved, and the carboxyl group introduced on the C-6 or C-2 hydroxyl group appeared to impact anticoagulant activity in different ways.     

Growth of human mesenchymal stem cells (MSCs) on films of enzymatically modified chitosan

Mesenchymal stem cells (MSCs) are known to be an attractive cell source for tissue engineering and regenerative medicine. One of the main limiting steps for clinical use or biotechnological purposes is the expansion step. The research of compatible biomaterials for MSCs expansion is recently regarded as an attractive topic. The aim of this study was to create new functional biomaterial for MSCs expansion by evaluating the impact of chitosan derivative films modified by enzymatic approach. First, chitosan particles were enzymatically modified with ferulic acid (FA) or ethyl ferulate (EF) under an eco‐friendly procedure. Then, films of chitosan and its modified derivatives were prepared and evaluated by physicochemical and biological properties. Results showed that the enzymatic grafting of FA or EF onto chitosan significantly increased hydrophobic and antioxidant properties of chitosan films. The MSCs cell viability on chitosan derivative films also increased depending on the film thickness and the quantity of grafted phenols. Furthermore, the cytotoxicity test showed the absence of toxic effect of chitosan derivative films towards MSCs cells. Cell morphology showed a well attached and spread phenotype of MSCs cells on chitosan derivative films. On the other hand, due to the higher phenol content of FA‐chitosan films, their hydrophobic, antioxidant properties and cell adhesion were improved in comparison with those of EF‐chitosan films. Finally, this enzymatic process can be considered as a promising process to favor MSCs cell growth as well as to create useful biomaterials for biomedical applications especially for tissue engineering. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:491–500, 2016     

Studies on chitosan: 2. Solution stability and reactivity of partially N-acetylated chitosan derivatives in aqueous media

The stability of the solutions of partially N-acetylated chitosans was studied by two methods: (1) 1% solutions of the chitosan derivatives in 0.1 M aqueous acetic acid were added dropwise to buffer solutions with pH from 8.6 to 12 and to a 0.1 M NaOH solution; (2) to each 0.5% solution of the derivatives in 0.1 M acetic acid was added the desired amount of a 1 M NaOH solution. The stability data obtained were summarized with respect to the degree of N-acetylation. It was found that the solutions of the derivatives with more than 50% acetyl content were stable even in alkaline conditions and the gelation and precipitation of the solutions did not occur. The reactivity of the derivatives with the degree of N-acetylation of more than 50% was studied using methyl 4-azidobenzoimidate (MABI) and ethylene glycol diglycidyl ether in homogeneous states. It was found that MABI reacted with amino groups of the chitosans only at neutral pH and glycidyl groups reacted at neutral and alkaline pH. It seems that these unique properties of chitosans with a degree of N-acetylation of more than 50% will enable us to prepare new chitosan derivatives.     

Preparation and characterization of chitosans carrying aldehyde functions generated by nitrogen oxides

In this work, aldehyde-functionalized chitosan is produced by the reaction of chitosan with nitrogen oxides generated in situ from a HNO₃/H₃PO₄-NaNO₂ mixture. This method is more advantageous than the existing approaches, since the depolymerization is slower and the purification process is straightforward. The appearance of characteristic peaks in the Fourier transform infrared and carbon-13 nuclear magnetic resonance spectra (1733 cm⁻¹ and 183.4 ppm, respectively) of the product confirms the presence of the aldehyde functionality in the modified chitosans. The ¹H NMR spectra also revealed the presence of aldehyde groups. Furthermore, the gradual disappearance of the peaks due to aldehyde protons and a concomitant appearance of a new resonance at ∼8.05 ppm with increasing pH indicate the formation of Schiff's base between the aldehyde and the free amine groups. The aldehyde-functionalized chitosan prepared with 6 h of reaction time (chitosan-6h) forms a gel in situ without any added external crosslinker and it may potentially be useful as a vehicle for drug delivery.     

Synthesis of methylated chitosan containing aromatic moieties: Chemoselectivity and effect on molecular weight

N-Arylated chitosans were synthesized via Schiff bases formed by the reaction between the primary amino group of chitosan with aromatic aldehydes followed by reduction of the Schiff base intermediates with sodium cyanoborohydride. Treatment of chitosan containing N,N-dimethylaminobenzyl and N-pyridylmethyl substituents with iodomethane under basic conditions led to quaternized N-(4-N,N-dimethylaminobenzyl) chitosan and quaternized N-(4-pyridylmethyl) chitosan. Methylation occurred at either N,N-dimethylaminobenzyl and N-pyridylmethyl groups before the residual primary amino groups of chitosan GlcN units were substituted. The total degree of quaternization of each chitosan varied depending on the extent of N-substitution (ES) and the sodium hydroxide concentration used in methylation. Increasing ES increased the total degree of quaternization but reduced attack at the GlcN units. N,N-dimethylation and N-methylation at the primary amino group of chitosan decreased at higher ES’s. Higher total degrees of quaternization and degrees of O-methylation resulted when higher concentrations of sodium hydroxide were used. The molecular weight of chitosan before and after methylation was determined by gel permeation chromatography under mild acidic condition. The methylation of the N,N-dimethylaminobenzyl derivative with iodomethane was accompanied by numerous backbone cleavages and a concomitant reduction in the molecular weight of the methylated product was observed. The antibacterial activity of water-soluble methylated chitosan derivatives was determined using Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria; minimum inhibitory concentrations (MIC) of these derivatives ranged from 32 to 128 μg/mL. The presence of the N,N-dimethylaminobenzyl and N-pyridylmethyl substituents on chitosan backbone after methylation did not enhance the antibacterial activity against S. aureus. However, N-(4-N,N-dimethylaminobenzyl) chitosan with degree of quaternization at the aromatic substituent and the primary amino group of chitosan of 17% and 16–30%, respectively, exhibited a slightly increased antibacterial activity against E. coli.     

Quaternization of N-aryl chitosan derivatives: synthesis, characterization, and antibacterial activity

Chemical modification of chitosan by introducing quaternary ammonium moieties into the polymer backbone renders excellent antimicrobial activity to the adducts. In the present study, we have synthesized 17 derivatives of chitosan consisting of a variety of N-aryl substituents bearing either electron-donating or electron-withdrawing groups. Selective N-arylation of chitosan was performed via Schiff bases formed by the reaction between the 2-amino groups of the glucosamine residue of chitosan with aromatic aldehydes under acidic conditions, followed by reduction of the Schiff base intermediates with sodium cyanoborohydride. Each of the derivatives was further quaternized using N-(3-chloro-2-hydroxypropyl)trimethylammonium chloride (Quat-188) as the quaternizing agent that reacted with either the primary amino or hydroxyl groups of the glucosamine residue of chitosan. The resulting quaternized materials were water soluble at neutral pH. Minimum inhibitory concentration (MIC) antimicrobial studies of these materials were carried out on Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria in order to explore the impact of the extent of N-substitution (ES) on their biological activities. At ES less than 10%, the presence of the hydrophobic substituent, such as benzyl and thiophenylmethyl, yielded derivatives with lower MIC values than chitosan Quat-188. Derivatives with higher ES exhibited reduced antibacterial activity due to low quaternary ammonium moiety content. At the same degree of quaternization, all quaternized N-aryl chitosan derivatives bearing either electron-donating or electron-withdrawing substituents did not contribute antibacterial activity relative to chitosan Quat-188. Neither the functional group nor its orientation impacted the MIC values significantly.