Novel hybrid scaffolds for the cultivation of osteoblast cells

In this study, natural biodegradable polysaccharide, chitosan, and synthetic biodegradable polymer, poly(?-caprolactone) (PCL) were used to prepare 3D, hybrid polymeric tissue scaffolds (PCL/chitosan blend and PCL/chitosan/PCL layer by layer scaffolds) by using the electrospinning technique. The hybrid scaffolds were developed through HA addition to accelerate osteoblast cell growth. Characteristic examinations of the scaffolds were performed by micrometer, SEM, contact angle measurement system, ATR-FTIR, tensile machine and swelling experiments. The thickness of all electrospun scaffolds was determined in the range of 0.010 ± 0.001-0.012 ± 0.002 mm. In order to optimize electrospinning processes, suitable bead-free and uniform scaffolds were selected by using SEM images. Blending of PCL with chitosan resulted in better hydrophilicity for the PCL/chitosan scaffolds. The characteristic peaks of PCL and chitosan in the blend and layer by layer nanofibers were observed. The PCL/chitosan/PCL layer by layer structure had higher elastic modulus and tensile strength values than both individual PCL and chitosan structures. The layer by layer scaffolds exhibited the PBS absorption values of 184.2; 197.2% which were higher than those of PCL scaffolds but lower than those of PCL/chitosan blend scaffolds. SaOs-2 osteosarcoma cell culture studies showed that the highest ALP activities belonged to novel PCL/chitosan/PCL layer by layer scaffolds meaning better cell differentiation on the surfaces.     

Enhanced nerve growth factor efficiency in neural cell culture by immobilization on the culture substrate

Nerve growth factor (NGF) immobilization on a culture substrate may dramatically reduce the amount of NGF required for pheochromocytoma (PC12) cell culture. Coverslips on which NGF had been immobilized, or with NGF added to the culture medium daily, were used to culture PC12 cells. We examined the effects of adding 5, 10, or 100 ng of NGF to cultures daily, and compared them to the effects of immobilizing 5, 10, or 100 ng of NGF on culture substrates in a single dose. Cultures with 10 or 5 ng NGF added daily showed dramatically decreased cell viability, mitochondrial metabolic activity, and neuronal differentiation compared to cultures with 100 ng NGF added daily, while also exhibiting increased apoptosis. In contrast, a single dose of 100 ng immobilized NGF yielded results similar to 100 ng NGF added daily (total: 300 ng over 3 days), and 10 or 5 ng immobilized NGF showed far better results than 10 or 5 ng NGF added daily. These results demonstrate that NGF immobilization can dramatically reduce the amount of NGF required in neuronal cell culture.     

Recombinant expression of a chitosanase and its application in chitosan oligosaccharide production

Recently, considerable attention has been focused on chitosan oligosaccharides (COSs) due to their various biological activities. COSs can be prepared by enzymatic degradation of chitosan, which is the deacetylation product of chitin, one of the most abundant biopolymers in nature. In the current study, we recombinantly expressed a chitosanase and used it for COS preparation. A bacillus-derived GH8 family chitosanase with a 6×His tag fused at its N-terminal was expressed in the Escherichia coli strain BL21(DE3) as a soluble and active form. Its expression level could be as high as 500 mg/L. Enzymatic activity could reach approximately 140,000 U/L under our assay conditions. The recombinant chitosanase could be purified essentially to homogeneity by immobilized metal-ion affinity chromatography. The enzyme could efficiently convert chitosan into monomer-free COS: 1 g of enzyme could hydrolyze about 100 kg of chitosan. Our present work has provided a cheap chitosanase for large-scale COS production in industry.     

Heparin-functionalized chitosan scaffolds for bone tissue engineering

The aim of this study is to investigate the effects of heparin-functionalized chitosan scaffolds on the activity of preosteoblasts. The chitosan scaffolds having the pore size of ∼100 μm were prepared by a freeze-drying method. Two different methods for immobilization of heparin to chitosan scaffolds were successfully performed. In the first method, functionalization of the scaffolds was achieved by means of electrostatic interactions between negatively charged heparin and positively charged chitosan. The covalent immobilization of heparin to chitosan scaffolds by 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide (EDAC) and N-hydroxysuccinimide (NHS) was used as a second immobilization method. Morphology, proliferation, and differentiation of MC3T3-E1 preosteoblasts on heparin-functionalized chitosan scaffolds were investigated in vitro. The results indicate that covalently bound heparin containing chitosan scaffolds (CHC) stimulate osteoblast proliferation compared to other scaffolds, that is, unmodified chitosan scaffolds (CH), electrostatically bound heparin containing chitosan scaffolds (EHC), and CH+free heparin (CHF). SEM images also proved the stimulative effect of covalently bound heparin on the proliferation of preosteoblasts. Alkaline phosphatase (ALP) and osteocalcin (OCN) levels of cells proliferated on CHC and EHC were also higher than those for CH and CHF. In vitro studies have demonstrated that chitosan scaffolds increase viability and differentiation of MC3T3-E1 cells especially in the presence of immobilized heparin.     

Characterization of electrospun nanocomposite scaffolds and biocompatibility with adipose-derived human mesenchymal stem cells

Electrospun nanocomposite scaffolds were fabricated by encapsulating multi-walled carbon nanotubes (MWNT) in poly (lactic acid) (PLA) nanofibers. Scanning electron microscopy (SEM) confirmed the fabrication of nanofibers, and transmission electron microscopy identified the alignment and dispersion of MWNT along the axis of the fibers. Tensile testing showed an increase in the tensile modulus for a MWNT loading of 0.25 wt% compared with electrospun nanofibrous mats without MWNT reinforcement. Conductivity measurements indicated that the confined geometry of the fibrous system requires only minute doping to obtain significant enhancements at 0.32 wt%. Adipose-derived human mesenchymal stem cells (hMSCs) were seeded on electrospun scaffolds containing 1 wt% MWNT and 0 wt% MWNT, to determine the efficacy of the scaffolds for cell growth, and the effect of MWNT on hMSC viability and proliferation over two weeks in culture. Staining for live and dead cells and DNA quantification indicated that the hMSCs were alive and proliferating through day 14. SEM images of hMSCs at 14 days showed morphological differences, with hMSCs on PLA well spread and hMSCs on PLA with 1% MWNT closely packed and longitudinally aligned.     

Biosensor based on glutamate dehydrogenase immobilized in chitosan for the determination of ammonium in water samples

An optical biosensor based on glutamate dehydrogenase (GLDH) immobilized in a chitosan film for the determination of ammonium in water samples is described. The biosensor film was deposited on a glass slide via a spin-coating method. The ammonium was measured based on β-nicotinamide adenine dinucleotide (NADH) oxidation in the presence of α-ketoglutaric acid at a wavelength of 340 nm. The biosensor showed optimum activity at pH 8. The optimum chitosan concentrations and enzyme loading were found to be at 2% (w/v) and 0.08 mg, respectively. Optimum concentrations of NADH and α-ketoglutaric acid both were obtained at 0.15 mM. A linear response of the biosensor was obtained in the ammonium concentration range of 0.005 to 0.5 mM with a detection limit of 0.005 mM. The reproducibility of the biosensor was good, with an observed relative standard deviation of 5.9% (n = 8). The biosensor was found to be stable for at least 1 month when stored dry at 4 °C.     

Mucoadhesive chitosan/gelatin films for buccal delivery of propranolol hydrochloride

The aim of this work was to develop and characterize chitosan/gelatin films as innovative mucoadhesive system for buccal delivery of propranolol hydrochloride. FT-IR and TGA analysis confirmed the interaction between chitosan and gelatin. The presence of higher chitosan amounts in chitosan/gelatin films allowed the lowest percent water-uptake ability (235.1 ± 5.3%) and the highest in vivo residence time in the buccal cavity (240 ± 13 min). Moreover, the presence of mannitol in the formulation allowed 80% drug permeation through porcine buccal mucosa in 5 h. This behaviour suggests that the application of four and two films containing 5 mg of propranolol hydrochloride could be suitable for achieving the proposed daily dose for hypertension and atrial fibrillation treatment, respectively. Another interesting aspect of chitosan/gelatin films was their compatibility with buccal microflora in the absence of drug and their ability to determine growth inhibition for pathogen bacteria, but not for probiotic species, when loaded with drug.     

Effects of gangliosides on the differentiation of human mesenchymal stem cells into osteoblasts by modulating epidermal growth factor receptors

Gangliosides are sialic acid-conjugated glycosphingolipids that are believed to regulate cell differentiation as well as the signals of several signal molecules, including epidermal growth factor receptors (EGFR). These compounds are localized in a glycosphingolipid-enriched microdomain on the cell surface and regulated by the glycosphingolipid composition. However, the role that gangliosides play in osteoblastogenesis is not yet clearly understood, therefore, in this study, the relationship between gangliosides and EGFR activation was investigated during osteoblast differentiation in human mesenchymal stem cells (hMSCs). The results of high-performance thin-layer chromatography (HPTLC) showed that ganglioside GM3 expression was decreased, whereas ganglioside GD1a expression was increased during the differentiation of hMSCs into osteoblasts. In addition, an increase in the activation of alkaline phosphatase (ALP) was observed in response to treatment with EGF (5 ng/ml) and GD1a (1 μM) (p < 0.05). The activation of ALP was significantly elevated in response to treatment of ganglioside GD1a with EGF when compared to control cells (p < 0.01). However, treatment with GM3 (1 μM) resulted in decreased ALP activation (p < 0.01), and treatment of hMSCs with a chemical inhibitor of EGFR, AG1478, removed the differential effect of the two gangliosides. Moreover, incubation of the differentiating cells with GD1a enhanced the phosphorylation of EGFR, whereas treatment with GM3 reduced the EGFR phosphorylation. However, AG1478 treatment inhibited the effect of ganglioside GD1a elicitation on EGFR phosphorylation. Taken together, these results indicate that GD1a promotes osteoblast differentiation through the enhancement of EGFR phosphorylation, but that GM3 inhibits osteoblast differentiation through reduced EGFR phosphorylation, suggesting that GM3 and GD1a are essential molecules for regulating osteoblast differentiation in hMSCs.     

Immobilization of a protease on modified chitosan beads for the depolymerization of chitosan

Neutral protease was immobilized on chitosan (CS), carboxymethyl chitosan (CMCS), and N-succinyl chitosan (NSCS) hydrogel beads. And the biocatalysts obtained were used to prepare low molecular weight chitosan (LMWC) and chitooligomers. Weight-average molecular weight of LMWC produced by neutral protease immobilized on CS, CMCS and NSCS hydrogel beads were 3.4 kDa, 3.2 kDa and 1.9 kDa, respectively. The effects of immobilization support and substrate on enzymatic reaction were analyzed by measuring classical Michaelis-Menten kinetic parameters. The FT-IR, XRD and potentiometric determination results indicated decrease of molecular weight led to transformation of crystal structure, but the degree of N-deacetylation and chemical structures of residues were not changed compared to initial chitosan. The degree of polymerization of chitooligomers was mainly from 2 to 7. We observed a strong dependence of the immobilized enzyme properties on the chemical nature of the supports, which leads to different microenvironment of neutral protease and changes the hydrolyzing process.     

Evaluation of RGD- or EGF-immobilized chitosan scaffolds for chondrogenic activity

Chitosan scaffolds were prepared by freeze-drying method and modified with Arg-Gly-Asp (RGD) sequence of fibronectin or epidermal growth factor (EGF) by covalent immobilization. The results obtained from FTIR-ATR, fluorescence visualization and quantitative measurements showed that biosignal molecules, RGD and EGF, were successfully immobilized on chitosan scaffolds. ATDC5 murine chondrogenic cells were seeded on both type of scaffolds, chitosan-RGD and chitosan-EGF, and cultured for 28 days in stationary conditions. According to the results of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazoliumbromide (MTT) test, considerable increase in cell proliferation was only detected on chitosan-EGF scaffolds. Biochemical analysis of the chondrocyte seeded scaffolds showed that glycosaminoglycan (GAG) and deoxyribonucleic acid (DNA) content of the scaffolds increases with time. In conclusion, EGF-modified chitosan scaffolds (containing 1.83 microg EGF/3 mg dry scaffold) have been proposed to promote chondrogenesis and to have potential for reticular cartilage regeneration.     

Characterization and antimicrobial activity of water-soluble N-(4-carboxybutyroyl) chitosans against some plant pathogenic bacteria and fungi

Water-soluble N-(4-carboxybutyroyl) chitosan derivatives with different degrees of substitution (DS) were synthesized to enhance the antimicrobial activity of chitosan molecule against plant pathogens. Chitosan in a solution of 2% aqueous acetic acid-methanol (1:1, v/v) was reacted with 0.1, 0.3, 0.6 and 1 mol of glutaric anhydride to give N-(4-carboxybutyroyl) chitosans at DS of 0.10, 0.25, 0.48 and 0.53, respectively. The chemical structures and DS were characterized by ¹H and ¹³C NMR spectroscopy, which showed that the acylate reaction took place at the N-position of chitosan. The synthesized derivatives were more soluble than the native chitosan in water and in dilute aqueous acetic acid and sodium hydroxide solutions. The antimicrobial activity was in vitro investigated against the most economic plant pathogenic bacteria of Agrobacterium tumefaciens and Erwinia carotovora and fungi of Botrytis cinerea, Pythium debaryanum and Rhizoctonia solani. The antimicrobial activity of N-(4-carboxybutyroyl) chitosans was strengthened than the un-modified chitosan with the increase of the DS. A compound of DS 0.53 was the most active one with minimum inhibitory concentration (MIC) of 725 and 800 mg/L against E. carotovora and A. tumefaciens, respectively and also in mycelial growth inhibiation against B. cinerea (EC₅₀ = 899 mg/L), P. debaryanum (EC₅₀ = 467 mg/L) and R. solani (EC₅₀ = 1413 mg/L).     

Continuous production of β-cyclodextrin from starch by highly stable cyclodextrin glycosyltransferase immobilized on chitosan

Cyclodextrin glycosyltransferase (CGTase) from Thermoanaerobacter sp. was covalently immobilized on glutaraldehyde-activated chitosan spheres and used in a packed bed reactor to investigate the continuous production of β-cyclodextrin (β-CD). The optimum temperatures were 75 °C and 85 °C at pH 6.0, respectively for free and immobilized CGTase, and the optimum pH (5.0) was the same for both at 60 °C. In the reactor, the effects of flow rate and substrate concentration in the β-CD production were evaluated. The optimum substrate concentration was 4% (w/v), maximizing the β-CD production (1.32 g/L) in a flow rate of 3 mL/min. In addition, the biocatalyst had good operational stability at 60 °C, maintaining 61% of its initial activity after 100 cycles of batch and 100% after 100 h of continuous use. These results suggest the possibility of using this immobilized biocatalyst in continuous production of CDs.     

Development of a rapid culture method to induce adipocyte differentiation of human bone marrow-derived mesenchymal stem cells

Human mesenchymal stem cells (hMSCs) derived from bone marrow are multipotent stem cells that can regenerate mesenchymal tissues such as adipose, bone or muscle. It is thought that hMSCs can be utilized as a cell resource for tissue engineering and as human models to study cell differentiation mechanisms, such as adipogenesis, osteoblastogenesis and so on. Since it takes 2-3 weeks for hMSCs to differentiate into adipocytes using conventional culture methods, the development of methods to induce faster differentiation into adipocytes is required. In this study we optimized the culture conditions for adipocyte induction to achieve a shorter cultivation time for the induction of adipocyte differentiation in bone marrow-derived hMSCs. Briefly, we used a cocktail of dexamethasone, insulin, methylisobutylxanthine (DIM) plus a peroxisome proliferator-activated receptor γ agonist, rosiglitazone (DIMRo) as a new adipogenic differentiation medium. We successfully shortened the period of cultivation to 7-8 days from 2-3 weeks. We also found that rosiglitazone alone was unable to induce adipocyte differentiation from hMSCs in vitro. However, rosiglitazone appears to enhance hMSC adipogenesis in the presence of other hormones and/or compounds, such as DIM. Furthermore, the inhibitory activity of TGF-β1 on adipogenesis could be investigated using DIMRo-treated hMSCs. We conclude that our rapid new culture method is very useful in measuring the effect of molecules that affect adipogenesis in hMSCs.     

Development of tyrosinase biosensor based on quantum dots/chitosan nanocomposite for detection of phenolic compounds

A sensitive and simple amperometric biosensor for phenols was developed based on the immobilization of tyrosinase into CdS quantum dots/chitosan nanocomposite matrix. The nanocomposite film with porous nanostructure, excellent hydrophilicity and biocompatibility resulted in high enzyme loading, and the tyrosinase (Tyr) immobilized in this novel matrix retained its activity to a large extent. The CdS quantum dots/chitosan nanocomposite film was characterized by scanning electron microscopy and electrochemical impedance spectroscopy, and the parameters of the various experimental variables for the biosensor were optimized. Under the optimal conditions, the designed biosensor displayed a wide linear response to catechol over a concentration range of 1.0 × 10⁻⁹ to 2.0 × 10⁻⁵ M with a high sensitivity of 561 ± 9.7 mA M⁻¹ and a low detection limit down to 0.3 nM at a signal-to-noise ratio of 3. The CdS quantum dots/chitosan nanocomposites could provide a novel matrix for enzyme immobilization to promote the development of biosensing and biocatalysis.     

Amine functional monodisperse microbeads via precipitation polymerization of N-vinyl formamide: immobilized laccase for benzidine based dyes degradation

Densely cross-linked poly(vinylamine) microbeads (∼2 μm) were prepared by precipitation copolymerization of N-vinyl formamide and ethylene glycoldimethacrylate in acetonitrile. The formamido groups of the microbeads were hydrolyzed into amino groups. Then, amino-functionalized microbeads were used for covalent immobilization of laccase via glutaraldehyde coupling. The average amount of immobilized enzyme was 18.7 mg/g microbeads. Kinetic parameters, V_max and K_m values were determined as 20.7 U/mg protein and 2.76 × 10⁻² mmol/L for free enzyme and 15.8 U/mg protein and 4.65 mmol/L for the immobilized laccase, respectively. The immobilized laccase was operated in a batch reactor for the degradation of two different benzidine based dyes (i.e., Direct Blue 1 and Direct Red 128). The laccase immobilized on the microbeads was very effective for removal of these dyes which interfere with the hormonal system.     

Efficient production of (R)-(−)-mandelic acid in biphasic system by immobilized recombinant E. coli

The recombinant Escherichia coli M15/BCJ2315 which harbored a mandelonitrilase from Burkholderia cenocepacia J2315 was immobilized via catecholic chitosan and functionalized with magnetism by iron oxide nanoparticles. The immobilized cells showed high activity recovery, enhanced stability and good operability in the enantioselective hydrolysis of mandelonitrile to (R)-(−)-mandelic acid. Furthermore, the immobilized cells were reused up to 15 cycles without any activity loss in completely hydrolyzing mandelonitrile (100 mM) within 1 h in aqueous solution. The ethyl acetate–water biphasic system was built and optimized. Under the optimal conditions, as high as 1 M mandelonitrile could be hydrolyzed within 4 h with a final yield and ee value of 99% and 95%, respectively. Moreover, the successive hydrolysis of mandelonitrile was performed by repeated use of the immobilized cells for 6 batches, giving a final productivity (g L⁻¹ h⁻¹) and relative production (g g⁻¹) of 40.9 and 38.9, respectively.     

Immobilization of α-amylase from mung beans (Vigna radiata) on Amberlite MB 150 and chitosan beads: A comparative study

α-Amylase from mung beans (Vigna radiata) was immobilized on two different matrices, Amberlite MB 150 and chitosan beads. Maximum immobilization obtained was 72% and 69% in case of Amberlite and chitosan beads, respectively. The pH optima of soluble α-amylase were 5.6, whereas that for immobilized amylase on chitosan and Amberlite was 7.0. Soluble amylase and Amberlite immobilized amylase showed maximum activity at 65 °C, whereas chitosan immobilized amylase showed maximum activity at 75 °C. α-Amylase immobilized on Amberlite showed apparent K_m of 2.77 mg/ml, whereas α-amylase immobilized on chitosan showed an apparent K_m of 5 mg/ml. The Amberlite-amylase and chitosan-amylase showed a residual activity of 43% and 27%, respectively, after 10 uses. The loss of activity for free amylase after 100 days of storage at 4 °C was 70%, whereas that for Amberlite- and chitosan-amylases, under the same experimental conditions, the losses were 45% and 55%, respectively. The easy availability of mung bean α-amylase, the ease of its immobilization on low-cost matrices and good stability upon immobilization in the present study makes it a suitable product for further use in industrial applications.     

The cytoprotection of chitosan based hydrogels in xenogeneic islet transplantation: An in vivo study in streptozotocin-induced diabetic mouse

Immune rejection and scarcity of donor tissues are the restrictions of islets transplantation. In this study, the cytoprotection of chitosan hydrogels in xenogeneic islet transplantation was demonstrated. Wistar rat islets encapsulated in chitosan hydrogels were performed glucose challenge test and live/dead cell staining in vitro. Islets/chitosan hydrogels were transplanted into the renal subcapsular space of diabetic C57BL/6 mice. Non-fasting blood glucose level (NFBG), body weight, intraperitoneal glucose tolerance test (IPGTT), and glucose disappearance rate were determined perioperatively. The serum insulin level was analyzed, and the kidney transplanted with islets/chitosan hydrogels were retrieved for histological examination after sacrifice. The present results showed that islets encapsulated in chitosan hydrogels secreted insulin in response to the glucose stimulation as naked islets with higher cell survival. The NFBG of diabetic mice transplanted with islets/chitosan hydrogels decreased from 487 ± 46 to 148 ± 32 at one day postoperation and maintained in the range of 201 ± 36 mg/dl for four weeks with an increase in body weight. IPGTT showed the glucose disappearance rate of mice transplanted with islets/chitosan hydrogels was significant faster than that of mice transplanted with naked islets; the serum insulin level increased from 0.29 ± 0.06 to 1.69 ± 0.65 μg/dl postoperatively. Histological examination revealed that the islets successfully engrafted at renal subcapsular space with positive insulin staining. The immunostain was negative for neither the T-cell lineages nor the monocyte/macrophages. This study indicates that the chitosan hydrogels deliver and protect encapsulated islets successfully in xenotransplantation.     

Injectable biodegradable starch/chitosan delivery system for the sustained release of gentamicin to treat bone infections

Starch-conjugated chitosan microparticles were produced aimed to be used as a carrier for the long term sustained/controlled release of antibiotic drugs to control bone infection. The microparticles were prepared by a reductive alkylation crosslinking method. The obtained microparticles showed a spherical shape, with a slightly rough and porous surface, and a size range of 80-150 μm. Gentamicin was entrapped into the starch-conjugated chitosan microparticles and its release profile was studied in vitro. Increasing concentrations of gentamicin (from 50 to 150 mg/mL) led to a decrease in the encapsulation efficiency (from 67 to 55%), while drug loading increased from 4 to 27%. A sustained release of gentamicin was observed over a period of 30 days. The release kinetics could be controlled using an ionic crosslinker agent. In addition, a bacterial inhibition test on Staphylococcus aureus shows a diameter of the sample inhibition zone ranging from 12 to 17 mm (70-100% of relative activity).