A comparison of the kinetic properties of free and immobilized Aspergillus oryzae β-galactosidase

The objective of this work was to compare the properties of free and immobilized β-galactosidase (Aspergillus oryzae), entrapped in alginate–gelatin beads and cross-linked with glutaraldehyde. The free and immobilized forms of the enzyme showed no decrease in enzyme activity when incubated in buffer solutions in pH ranges of 4.5–7.0. The kinetics of lactose hydrolysis by the free and immobilized enzymes were studied at maximum substrate concentrations of 90 g/L and 140 g/L, respectively, a temperature of 35 °C and a pH of 4.5. The Michaelis–Menten model with competitive inhibition by galactose fit the experimental results for both forms. The K_m and V_m values of the free enzyme were 52.13 ± 2.8 mM and 2.56 ± 0.3 g_glucose/L min mg_enzyme, respectively, and were 60.30 ± 3.3 mM and 1032.07 ± 51.6 g_lactose/min m³_catalyst, respectively, for the immobilized form. The maximum enzymatic activity of the soluble form of β-galactosidase was obtained at pH 4.5 and 55 °C. Alternatively, the immobilized form was most active at pH 5.0 at 60 °C. The free and immobilized enzymes presented activation energies of 6.90 ± 0.5 kcal/mol and 7.7 ± 0.7 kcal/mol, respectively, which suggested that the immobilized enzyme possessed a lower resistance to substrate transfer.     

Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7

A thermophilic Bacillus sp. strain AN-7, isolated from a soil in India, produced an extracellular pullulanase upon growth on starch–peptone medium. The enzyme was purified to homogeneity by ammonium sulfate precipitation, anion exchange and gel filtration chromatography. The optimum temperature and pH for activity was 90 °C and 6.0. With half-life time longer than one day at 80 °C the enzyme proves to be thermostable in the pH range 4.5–7.0. The pullulanase from Bacillus strain lost activity rapidly when incubated at temperature higher than 105 °C or at pH lower than 4.5. Pullulanase was completely inhibited by the Hg²⁺ ions. Ca²⁺, dithiothreitol, and Mn²⁺ stimulated the pullulanase activity. Kinetic experiments at 80 °C and pH 6.0 gave V_max and K_m values of 154 U mg⁻¹ and 1.3 mg ml⁻¹. The products of pullulan were maltotriose and maltose. This proved that the purified pullulanase (pullulan-6-glucanohydrolase, EC 3.2.1.41) from Bacillus sp. AN-7 is classified under pullulanase type I. To our knowledge, this Bacillus pullulanase is the most highly thermostable type I pullulanase known to date.     

Partial nitrification under limited dissolved oxygen conditions

Partial nitrification to nitrite is technically feasible and economically favourable, especially when wastewaters contained high ammonium concentrations or low C/N ratios. Partial nitrification can be obtained by selectively inhibiting nitrite-oxidizing bacteria (NOB) through appropriate regulation of the pH, temperature and dissolved oxygen (DO) concentrations. The effect of pH, DO levels and temperature on ammonia oxidation rate and nitrite accumulation was investigated in order to determine the optimal conditions for partial nitrification of synthetic wastewater with high ammonia concentration. The experiments performed at low DO levels to lower the total oxygen needed in the nitrification step, which means great saving in aeration. During the start-up stage pH and DO were set at 7.0–7.4 and 0.5 mg/l, respectively. The reactor was operated until complete partial nitrification was achieved. The effect of pH, DO on partial nitrification was studied, as pH was kept at 6.5, 7.5, 8.5, 9.5 and DO at 0.5±0.2, 1.5±0.2 and 2.5±0.2 mg/l, and temperature at 30 °C. The influence of temperature on k_a value was studied by keeping pH=7.5, DO=1.5 mg/l and temperature was controlled at 12, 20 and 30 °C, respectively. The results showed that partial nitrification to nitrite was steadily obtained and the optimal operational parameters were pH=7.5, DO=1.5 mg/l, T=30 °C based on ammonia oxidation rate and nitrite accumulation rate. The maximum k_a was achieved and to be 115.1×10⁻³ mg NH₄⁺–N (mg VSS h)⁻¹ under this condition.     

Continuous degradation of maltose by enzyme entrapment technology using calcium alginate beads as a matrix

Maltase from Bacillus licheniformis KIBGE-IB4 was immobilized within calcium alginate beads using entrapment technique. Immobilized maltase showed maximum immobilization yield with 4% sodium alginate and 0.2 M calcium chloride within 90.0 min of curing time. Entrapment increases the enzyme–substrate reaction time and temperature from 5.0 to 10.0 min and 45 °C to 50 °C, respectively as compared to its free counterpart. However, pH optima remained same for maltose hydrolysis. Diffusional limitation of substrate (maltose) caused a declined in V_max of immobilized enzyme from 8411.0 to 4919.0 U ml^?1 min^?1 whereas, K_m apparently increased from 1.71 to 3.17 mM ml^?1. Immobilization also increased the stability of free maltase against a broad temperature range and enzyme retained 45% and 32% activity at 55 °C and 60 °C, respectively after 90.0 min. Immobilized enzyme also exhibited recycling efficiency more than six cycles and retained 17% of its initial activity even after 6th cycles. Immobilized enzyme showed relatively better storage stability at 4 °C and 30 °C after 60.0 days as compared to free enzyme.     

Magnetostructural correlations and catecholase-like activities of μ-alkoxo-μ-carboxylato double bridged dinuclear and tetranuclear copper(II) complexes

Two μ-alkoxo-μ-carboxylato bridged dinuclear copper(II) complexes, [Cu₂(L¹)(μ-HCO₂)] (1) ((H₃L¹ = 1,3-bis(5-bromosalicylideneamino)-2-propanol)), [Cu₂(L²)(μ-HCO₂)] · dmf (2) (H₃L² = 1,3-bis(3,5-chlorosalicylideneamino-2-propanol)), and two μ-alkoxo-μ-dicarboxylato doubly bridged tetranuclear copper(II) complexes, [{Cu₂(L³)}₂(μ-O₂C–C(CH₃)₂–CO₂)] · 5H₂O · 3CH₃OH (3) ((H₃L³ = 1,3-bis(salicylid-deneamino)-2-propanol)) and [{Cu₂(L³)}₂(μ- O₂CCH₂–C₆H₄–CH₂CO₂)] · 2H₂O (4) have been prepared and characterized. The single crystal X-ray analysis shows that the structures of complexes 1 and 2 are dimeric with two adjacent copper(II) atoms bridged by μ-alkoxo-μ-carboxylato ligands with the Cu⋯Cu distances and Cu–O(alkoxo)–Cu angles are 3.511 Å and 132.85° for 1, 3.517 Å and 131.7° for 2, respectively. Complexes 3 and 4 consist of μ-alkoxo-μ-dicarboxylato doubly bridged tetranuclear Cu(II) complexes with mean Cu–Cu distances and Cu–O–Cu angles of 3.158 Å and 108.05° for 3 and 3.081 Å and 104.76° for 4, respectively. Magnetic measurements reveal that 1 and 2 are strong antiferromagnetically coupled with 2J = −156 and −152 cm⁻¹, respectively, while 3 and 4 exhibit ferromagnetic coupling with 2J = 86 and 155.2 cm⁻¹, respectively. The 2J values of 1–4 are linearly correlated to the Cu–O–Cu angles. Dependence of the pH at 25 °C on the reaction rate of oxidation of 3,4-di-tert-butylcatechol (3,5-dtbc) to the corresponding quinone catalyzed by 1–4 was studied. Complexes 1–4 exhibit high catecholase-like activity at pH 9.0 and 25 °C for oxidation of 3,5-di-tert-butylcatechol.     

Structural characterization of thermostable,solvent tolerant,cytosafe tannase from Bacillus subtilis PAB2

Tannase production by Bacillus subtilis PAB2, was investigated under solid state fermentation using tamarind seed as sole carbon source and it was found as the highest titer (73.44 U/gds). The enzyme was purified to homogeneity, which showed the molecular mass around 52 kDa (K_m = 0.445 mM, V_max = 125.8 mM/mg/min and K_cat = 2.88 min^–1). The enzyme was found stable in a range of pH (3.0–8.0) and temperature (30–70 °C) with an optimal activity at pH 5.0, pI of 4.4 and at 40 °C temperature. It exhibited half-life (t_1/2) of 4.5 h at 60 °C. The enzyme comprised a typical secondary structure containing α-helix (9.3%), β-pleated sheet (33.6%) and β-turn (17.2%). The native conformation of the enzyme was alike a 44 nm spherical nanoparticle upon aggregation. Thermodynamic parameters of tannase revealed that it was stable at 40 °C and showed Q₁₀, ΔG_d and ΔS_d values of 2.08, 99.37 KJ/mol and 252.38 J mol⁻¹ K⁻¹, respectively. Organic solvents were stimulatory with regard to enzyme activity. Moreover, the altered enzyme activity was determined to be correlated with the changes in structural conformation in presence of inducer and inhibitor. Tannase was explored to have no cytotoxicity on Vero cell line as well as rat model study.     

Biochemical characterization of a lichenase from Penicillium occitanis Pol6 and its potential application in the brewing industry

The purification and characterization of an extracellular lichenase from the fungus Penicillium occitanis Pol6 were studied. The strain produced the maximum level of extracellular lichenase (45 ± 5 U ml⁻¹) when grown in a medium containing oat flour (2%, w/v) at 30 °C for 7 days. The purified enzyme EG_L showed as a single protein band on SDS–PAGE with a molecular mass of 20 kDa. Its N-terminal sequence of 10 amino acid residues was determined as LDNGAPLLNV. The purified enzyme showed an optimum activity at pH 3.0 and 50–60 °C. The half-lives of EG_L at 60 °C and 70 °C were 80 min and 21 min, respectively. Substrate specificity studies revealed that the enzyme is a true β-1,3-1,4-d-glucanase. The enzyme hydrolyzed lichenan to yield trisaccharide, and tetrasaccharide as the main products. Under simulated mashing conditions, addition of EG_L (20 U/ml) or a commercial β-glucanase (20 U/ml) reduced the filtration time (25% and 21.3%, respectively) and viscosity (10% and 8.18%, respectively). These characteristics indicate that EG_L is a good candidate in the malting and brewing industry.     

Purification and partial characterisation of a thermostable xylanase from salt-tolerant Thermobifida halotolerans YIM 90462T

ThxynA, an extracellular xylanase of T. halotolerans YIM 90462^T, was purified to homogeneity from a fermentation broth by ultra-filtration, ammonium sulphate precipitation, hydrophobic chromatography and ion exchange chromatography. The purified xylanase has a molecular mass of 24 kDa and is optimally active at 80 °C and pH 6.0. The enzyme is stable over a broad pH range (pH 6.0–10.0) and shows good thermal stability when incubated at 70 °C for 1 h. The K_m and V_max values of the enzyme are 11.6 mg/mL and 434 μmol mg^?1 min^?1, respectively, using oat spelt xylan as a substrate. Moreover, the enzyme seemingly has both xylanase activity and cellulase activity. These unique properties suggest that it may be useful for industrial applications.     

Purification and characterization of piceid-β-d-glucosidase from Aspergillus oryzae

The piceid-β-d-glucosidase that hydrolyzes the β-d-glucopyranoside bond of piceid to release resveratrol was isolated from Aspergillus oryzae sp.100 strain, and the enzyme was purified and characterized. The enzyme was purified to one spot in SDS polyacrylamide gel electrophoresis, and its molecular weight was about 77 kDa. The optimum temperature of the piceid-β-d-glucosidase was 60 °C, and the optimum pH was 5.0. The piceid-β-d-glucosidase was stable at less than 60 °C, and pH 4.0–5.0. Ca²⁺, Mg²⁺ and Zn²⁺ ions have no significant effect on enzyme activity, but Cu²⁺ ion inhibits enzyme activity strongly. The K_m value was 0.74 mM and the V_max value was 323 nkat mg⁻¹ for piceid.     

Comparative biochemical characterization of soluble and chitosan immobilized β-galactosidase from Kluyveromyces lactis NRRL Y1564

An investigation was conducted on the production of β-galactosidase (β-gal) by different strains of Kluyveromyces, using lactose as a carbon source. The maximum enzymatic activity of 3.8 ± 0.2 U/mL was achieved by using Kluyveromyces lactis strain NRRL Y1564 after 28 h of fermentation at 180 rpm and 30 °C. β-gal was then immobilized onto chitosan and characterized based on its optimal operation pH and temperature, its thermal stability and its kinetic parameters (K_m and V_max) using o-nitrophenyl β-d-galactopyranoside as substrate. The optimal pH for soluble β-gal activity was found to be 6.5 while the optimal pH for immobilized β-gal activity was found to be 7.0, while the optimal operating temperatures were 50 °C and 37 °C, respectively. At 50 °C, the immobilized enzyme showed an increased thermal stability, being 8 times more stable than the soluble enzyme. The immobilized enzyme was reused for 10 cycles, showing stability since it retained more than 70% of its initial activity. The immobilized enzyme retained 100% of its initial activity when it was stored at 4 °C and pH 7.0 for 93 days. The soluble β-gal lost 9.4% of its initial activity when it was stored at the same conditions.     

A thermoalkaliphilic halotolerant esterase from Rhodococcus sp. LKE-028 (MTCC 5562): Enzyme purification and characterization

A newly isolated Rhodococcus sp. LKE-028 (MTCC 5562) from soil samples of Gangotri region of Uttarakhand Himalayan produced a thermostable esterase. The enzyme was purified to homogeneity with purification fold 62.8 and specific activity 861.2 U mg^?1 proteins along with 26.7% recovery. Molecular mass of the purified enzyme was 38 kDa and values of K_m and V_max were 525 nM and 1666.7 U mg^?1 proteins, respectively. The esterase was active over a broad range of temperature (40–100 °C) and pH (7.0–12.0). The esterase was most active at pH 11.0. The optimum temperature of enzyme activity was 70 °C and the enzyme was completely stable after 3 h pre-incubation at 60 °C. Metal ions like Ca²⁺, Mg²⁺ and Co²⁺ stimulated enzyme activities. Purified esterase remarkably retained its activity with 10 M NaCl. Enzyme activity was slightly increased in presence of non-polar detergents (Tween 20, Tween 80 and Triton X 100), and compatible with oxidizing agents (H₂O₂) and reducing agents (β-mercaptoethanol). Activities of the enzyme was stimulated in presence of organic solvents like DMSO, benzene, toluene, methanol, ethyl alcohol, acetone, isoamyl alcohol after 10 days long incubation. The enzyme retained over 75% activity in presence of proteinase K. Besides hyperthermostability and halotolerancy the novelty of this enzyme is its resistance against protease.     

Cell-associated acid β-xylosidase production by Penicillium sclerotiorum

In recent decades, β-xylosidases have been used in many processing industries. In this work, the study of xylosidase production by Penicillium sclerotiorum and its characterization are reported. Optimal production was obtained in medium supplemented with oat spelts xylan, pH 5.0, at 30 °C, under stationary condition for six days. The optimum activity temperature was 60 °C and unusual optimum pH 2.5. The enzyme was stable at 50 and 55 °C, with half-life of 240 and 232 min, respectively. High pH stability was verified from pH 2.0 to 4.0 and 7.5. The β-xylosidase was strongly inhibited by divalent cations, sensitive to denaturing agents SDS, EDTA and activated by thiol-containing reducing agents. The apparent V_max and K_m values was 0.48 μmol PNXP min^?1 mg^?1 protein and 0.75 mM, respectively. The enzyme was xylose tolerant with a K_i of 28.7. This enzyme presented interesting characteristics for biotechnological process such as animal feed, juice and wine industries.     

Characterization of functionally active immobilized carbonic anhydrase purified from sheep blood lysates

Carbonic anhydrase (CA) catalyzes the reversible reaction of hydration of CO₂ to bicarbonate and the dehydration of bicarbonate back to CO₂. Sequestration of CO₂ from industrial processes or breathing air may require a large amount of highly active and stable CA. Therefore, the objectives of the present study were to purify large amounts of CA from a cheap and easily accessible source of the enzyme and to characterize the enzymatic and kinetic properties of soluble and immobilized enzyme. We recovered 80% of pure enzyme with a specific activity of 4870 EU/mg protein in a single step using sheep blood lysates from slaughter house waste products and CA specific inhibitor affinity chromatography. Since affinity pure CA showed both anhydrase and esterase activities, we measured the esterase activities for enzymology. The Michaelis–Menten constant, K_M, pH optimum, activation energy, and thermal stability of soluble enzymes were 8 × 10^?2 M, 7.3 pH, 7.3 kcal/mol and 70 °C, respectively.The immobilization of the enzyme to Affigel-10 was very efficient and 83% of purified enzyme was immobilized. The immobilized enzyme showed a K_M of 5 × 10^?2 M and activation energy of 8.9 kcal/mol, suggesting a better preference of substrate for immobilized enzyme in comparison to soluble enzyme. In contrast to soluble enzyme, immobilized enzyme showed relatively higher activity at pH 6–8. From these results, we concluded that a shift in pH profile toward acidic pH is due to modification of lysine residues involved in the immobilization process. The immobilized enzyme was stable at higher temperatures and showed highest activity at 80 °C. The activity of immobilized enzyme in a flow reactor at 0.5–2.2 ml/min flow rate was unaffected. Collectively, results from the present study suggested the application of blood lysate waste from animal slaughterhouses for purification of homogeneous enzyme for CO₂ capture in a flow reactor.     

Purification and characterization of an extracellular cholesterol oxidase from a Bordetella species

A soil-isolated bacterium (strain B4) was identified as a species of Bordetella and deposited with the China General Microbiological Culture Collection (code, CGMCC 2229). The bacterium grew in a mineral medium, on cholesterol as a sole source of carbon and energy. Only one metabolite of cholesterol was accumulated in detectable amounts during the strain growth. It was identified as 4-cholesten-3-one. Cholesterol oxidase (COD) (EC 1.1.3.6), which catalyzes cholesterol into this metabolite, was evidenced from the strain. The conditions of the bacterium growth were optimized for extracellular enzyme production, which then reached around 1700 UL⁻¹ within 24 h culturing. The enzyme was purified from the spent medium of the strain to homogeneity on SDS-PAGE, and characterized. Its molecular mass, as estimated by this technique, was 55 kDa. COD showed an optimum activity at pH 7.0. It was completely stable at pH 5.0 and 4 °C for 48 h, and retained 80% at least of its initial activity at pH 4.0 or at a pH of 6.0–10.0. The optimum temperature for its reaction was 37 °C. The thermal stability of COD was appreciable, as 90% or 80% of its initial activity was recovered after 1 h or 2 h incubation at 50 °C. Ag⁺ or Hg⁺ at 1 mM, was inhibitor of COD activity, while Cu²⁺, at the same concentration, was activator. The COD K_m, determined at 37 °C and pH 7.0, was 0.556 mM. The enzyme was stable at pH 7.0 and 37 °C during 24 h mechanical shaking in the presence of 33% (v/v) of either of the solvents, dimethylsulfoxide, ethyl acetate, butanol, chloroform, benzene, xylene or cyclohexane.     

Characterization of a HAP–phytase from a thermophilic mould Sporotrichum thermophile

The phytase of Sporotrichum thermophile was purified to homogeneity using acetone precipitation followed by ion-exchange and gel-filtration column chromatography. The purified phytase is a homopentamer with a molecular mass of ～456 kDa and pI of 4.9. It is a glycoprotein with about 14% carbohydrate, and optimally active at pH 5.0 and 60 °C with a T_1/2 of 16 h at 60 °C and 1.5 h at 80 °C. The activation energy of the enzyme reaction is 48.6 KJ mol^?1 with a temperature quotient of 1.66, and it displayed broad substrate specificity. Mg²⁺ exhibited a slight stimulatory effect on the enzyme activity, while it was markedly inhibited by 2,3-butanedione suggesting a possible role of arginine in its catalysis. The chaotropic agents such as guanidinium hydrochloride, urea and potassium iodide strongly inhibited phytase activity. Inorganic phosphate inhibited enzyme activity beyond 3 mM. The maximum hydrolysis rate (V_max) and apparent Michaelis–Menten constant (K_m) for sodium phytate were 83 nmol mg^?1 s^?1 and 0.156 mM, respectively. The catalytic turnover number (K_cat) and catalytic efficiency (K_cat/K_m) of phytase were 37.8 s^?1 and 2.4 × 10⁵ M^?1 s^?1, respectively. Based on the N-terminal and MALDI–LC–MS/MS identified amino acid sequences of the peptides, the enzyme did not show a significant homology with the known phytases.     

Cyanide hydratase from Aspergillus niger K10: Overproduction in Escherichia coli,purification, characterization and use in continuous cyanide degradation

A cyanide hydratase from Aspergillus niger K10 was expressed in Escherichia coli and purified. Apart from HCN, it transformed some nitriles, preferentially 2-cyanopyridine and fumaronitrile. V_max and K_m for HCN were ca. 6.8 mmol min⁻¹ mg⁻¹ protein and 109 mM, respectively. V_max for fumaronitrile and 2-cyanopyridine was two to three orders of magnitude lower than for HCN (ca. 18.8 and 10.3 μmol min⁻¹ mg⁻¹, respectively) but K_m was also lower (ca. 14.7 and 3.7 mM, respectively). Both cyanide hydratase and nitrilase activities were abolished in truncated enzyme variants missing 18–34 C-terminal aa residues. The enzyme exhibited the highest activity at 45 °C and pH 8–9; it was unstable at over 35 °C and at below pH 5.5. The operational stability of the whole-cell catalyst was examined in continuous stirred membrane reactors with 70-mL working volume. The catalyst exhibited a half-life of 5.6 h at 28 °C. A reactor loaded with an excess of the catalyst was used to degrade 25 mM KCN. A conversion rate of over 80% was maintained for 3 days.     

Immobilization of alkaline serine endopeptidase from Bacillus licheniformis on SBA-15 and MCF by surface covalent binding

An industrial enzyme, alkaline serine endopeptidase, was immobilized on surface modified SBA-15 and MCF materials by amide bond formation using carbodiimide as a coupling agent. The specific activities of free enzyme and enzyme immobilized on SBA-15 and MCF were studied using casein (soluble milk protein) as a substrate. The highest activity of free enzyme was obtained at pH 9.5 while this value shifted to pH 10 for SBA-15 and MCF immobilized enzyme. The highest activity of immobilized enzymes was obtained at higher temperature (60 °C) than that of the free enzyme (55 °C). Kinetic parameters, Michaelis–Menten constant (K_m) and maximum reaction velocity (V_max), were calculated as K_m = 13.375, 11.956, and 8.698 × 10^?4 mg/ml and V_max = 0.156, 0.163 and 0.17 × 10^?3 U/mg for the free enzyme and enzyme immobilized on SBA-15 and MCF, respectively. The reusability of immobilized enzyme showed 80% of the activity retained even after 15 cycles. Large pore sized MCF immobilized enzyme was found to be more promising than the SBA-15 immobilized enzyme due to the availability of larger pores of MCF, which offer facile diffusion of substrate and product molecules.     

Serum zinc is associated with plasma leptin and Cu–Zn SOD in elite male basketball athletes

This paper investigates the relationship between plasma trace element and plasma leptin, as well as percent fat mass, in 16 male basketball athletes. Blood samples were obtained before intensive training and 24 h after intensive training to measure plasma zinc (Zn), copper (Cu), calcium (Ca), magnesium (Mg), iron (Fe), and leptin levels. High-density lipoprotein cholesterol (HDL), low-density lipoprotein cholesterol (LDL), triglyceride (TG), total and cholesterol (TC) levels were determined using commercially available kits for humans. Subjects presented similar values in terms of age (21.1 ± 2.2 years old), body mass index (23.9 ± 2.00 kg/m²), percent body fat (14.40 ± 1.52%), plasma hemoglobin (150.1 ± 9.4 g/L), plasma Zn (17.47 ± 1.28 μmol/l), plasma Cu (13.42 ± 1.40 μmol/L), plasma Ca (2.41 ± 0.14 mmol/L), and plasma Mg (0.96 ± 0.02 mmol/L). The correlation analysis between degree of plasma leptin and plasma element contents was performed using the SPSS 16.0 software. Plasma Zn correlated positively with plasma leptin (r = 0.746, P < 0.01), Cu–Zn SOD (r = 0.827, P < 0.01), and negatively with percent fat mass (r = –0.598, P < 0.05) under no-training conditions. Meanwhile, plasma Cu, Ca, Mg, and Fe did not correlate with plasma leptin or percent fat mass (P > 0.05). In conclusion, plasma Zn may be involved in the regulation of plasma leptin and may serve as a lipid-mobilizing factor in Chinese men's basketball athletes.     

Isolation and properties of β-xylosidase from Aspergillus niger GS1 using corn pericarp upon solid state fermentation

There is growing interest in developing high-yield and low-cost production of xylanolytic enzymes for industrial applications using agroindustrial byproducts. A native strain of Aspergillus niger GS1 was used to produce β-xylosidase (EC 3.2.1.37) on solid state fermentation using corn pericarp (CP) with innovative alkaline electrolyzed water (AEW) pretreatment at room temperature. β-xylosidase was purified by ammonium sulfate fractionation followed by anion exchange and hydrophobic interaction chromatographies. β-Xylosidase showed a molecular weight of 111 kDa, isoelectric point of 5.35 and specific activity of 386.7 U (mg protein)^?1, using p-nitrophenyl-β-d-xylopyranoside as substrate, at pH 5 and 60 °C, and optimal activity at pH 4.5. Optimal temperature was 65 °C, showing full activity after 1 h at 60 °C. Activity was reduced by 1 mM β-mercaptoethanol (55.6 ± 0.1%), and enhanced by 1 mM SDS (11.0 ± 0.03%). K_m and V_max were 6.1 ± 0.9 mM and 1364 ± 105 U (mg protein)^?1, respectively, whereas k_cat was 5.1 s^?1. A predominant α-helix (41%) was determined from circular dichroism on β-xylosidase, while thermal transition profiles produced a T_m of 54.1 ± 5.8 °C, enthalpy change for unfolding of 67.4 ± 6.7 kJ/mol, and onset temperature of 37 °C. Pre-treatment of CP using AEW is an ecologically friendly alternative to chemical and heat treatments for the production of relatively high levels of β-xylosidase.     

Purification and physicochemical properties of polygalacturonase from Aspergillus niger MTCC 3323

Polygalacturonases are the pectinolytic enzymes that catalyze the hydrolytic cleavage of the polygalacturonic acid chain. In the present study, polygalacturonase from Aspergillus niger (MTCC 3323) was purified. The enzyme precipitated with 60% ethanol resulted in 1.68-fold purification. The enzyme was purified to 6.52-fold by Sephacryl S-200 gel-filtration chromatography. On SDS–PAGE analysis, enzyme was found to be a heterodimer of 34 and 69 kDa subunit. Homogeneity of the enzyme was checked by NATIVE-PAGE and its molecular weight was found to be 106 kDa. The purified enzyme showed maximum activity in the presence of polygalacturonic acid at temperature of 45 °C, pH of 4.8, reaction time of 15 min. The enzyme was stable within the pH range of 4.0–5.5 for 1 h. At 4 °C it retained 50% activity after 108 h but at room temperature it lost its 50% activity after 3 h. The addition of Mn²⁺, K⁺, Zn²⁺, Ca²⁺ and Al³⁺ inhibited the enzyme activity; it increased in the presence of Mg²⁺ and Cu²⁺ ions. Enzyme activity was increased on increasing the substrate concentration from 0.1% to 0.5%. The K_m and V_max values of the enzyme were found to be 0.083 mg/ml and 18.21 μmol/ml/min. The enzyme was used for guava juice extraction and clarification. The recovery of juice of enzymatically treated pulp increased from 6% to 23%. Addition of purified enzyme increased the %T₆₅₀ from 2.5 to 20.4 and °Brix from 1.9 to 4.8. The pH of the enzyme treated juice decreased from 4.5 to 3.02.