In vivo random mutagenesis of streptomycetes using mariner-based transposon Himar1

We report here the in vivo expression of the synthetic transposase gene himar1(a) in Streptomyces coelicolor M145 and Streptomyces albus. Using the synthetic himar1(a) gene adapted for Streptomyces codon usage, we showed random insertion of the transposon into the streptomycetes genome. The insertion frequency for the Himar1-derived minitransposons is nearly 100 % of transformed Streptomyces cells, and insertions are stably inherited in the absence of an antibiotic selection. The minitransposons contain different antibiotic resistance selection markers (apramycin, hygromycin, and spectinomycin), site-specific recombinase target sites (rox and/or loxP), I-SceI meganuclease target sites, and an R6Kγ origin of replication for transposon rescue. We identified transposon insertion loci by random sequencing of more than 100 rescue plasmids. The majority of insertions were mapped to putative open-reading frames on the S. coelicolor M145 and S. albus chromosomes. These insertions included several new regulatory genes affecting S. coelicolor M145 growth and actinorhodin biosynthesis.     

Precise excision of bacterial transposon Tn5 in yeast

Summary We have demonstrated that precise excision of bacterial transposon Tn5 can occur in the yeast, Saccharomyces cerevisiae. Tn5 insertions in the yeast gene LYS2 were generated by transposon mutagenesis made in Escherichia coli by means of a ::Tn5 vector. Nine insertions of Tn5 into the structural part of the yeast LYS2 gene situated in a shuttle epsiomal plasmid were selected. All the plasmids with a Tn5 insertion were used to transform yeast strains carrying a deletion of the entire LYS2 gene or a deletion of the part of LYS2 overlapping the point of insertion.All insertions inactivated the LYS2 gene and were able to revert with low (about 10^-8) frequencies to lysine prototrophy. Restriction analysis of revertant plasmids revealed them to be indistinguishable from the original plasmid without Tn5 insertion. DNA sequencing of the regions containing the points of insertions, made for two revertants, proved that Tn5 excision was completely precise.     

Efficient transposition of IS204-derived plasmids in Streptomyces coelicolor

In order to study functional gene expression in Streptomyces coelicolor, a mini-transposon encoding the apramycin resistance gene aac(3)IV within its inverted repeat (IR) boundaries was constructed based on IS204, which was previously identified in the genome of Nocardia asteroides YP21. The mini-transposon and IS204 transposase gene were then put on a kanamycin-resistant conjugative plasmid pDZY101 that can only replicate in Escherichia coli. After mating with S. coelicolor A3(2) M145, resistant colonies arose efficiently on both apramycin and kanamycin plates. Plasmid rescue indicated that entire plasmids were inserted into the M145 genome with cleavage at an inverted repeat junction formed by the right inverted repeat (IRR) and the last 18 bp of the transposase gene, while the left inverted repeat (IRL) was untouched. Southern blot analysis of the mutants using an aac(3)IV gene probe showed that transposition of plasmid pDZY101 was genetically stable, with a single-copy insertion within the S. coelicolor M145 genome. Several mutagenesis libraries of S. coelicolor M145 were constructed using plasmid pDZY101 derivatives and the transposon insertion site was determined. The correlation between novel mutant phenotypes and previously uncharacterized genes was established and these transposon locations were widely scattered around the genome.     

Characterization of Tn10d-Cam: a transposition-defective Tn10 specifying chloramphenicol resistance

Summary We have constructed a small, transposition-defective derivative of the transposon Tn10 that carries the chloramphenicol acetyltransferase gene of pACYC184. This new genetic element, Tn10d-Cam, transposes when Tn10 transposase is provided from a multi-copy plasmid. Transposon insertion mutagenesis of Salmonella typhimurium was performed by using a strain carrying a Tn10d-Cam insertion in an Escherichia coli F' episome as the donor in transductional crosses into recipients that carried a plasmid expressing Tn10 transposase. Tn10d-Cam insertion mutations were also generated by complementation in cis of Tn10d-Cam by a cotransducible Tn10 element that overproduces transposase. Here, transposase was provided only transiently, and the Tn10d-Cam insertion mutations were recovered in a transposase-free strain. Cis complementation was used for mutagenesis of a plasmid target. The site specificity of insertion and the effect of insertions on expression of a downstream gene were investigated, using Tn10d-Cam insertions in a plasmid carrying a segment of the histidine operon.     

Control of Tn7 transposition

Summary Our isolate of Tn7 (named Tn7S) contains an IS1 insertion, and this IS1 can be converted into Tn9. In vitro and in vivo deletions of Tn7S and Tn7S:: Tn9 define regions of the transposon required for antibiotic resistance and transposition. Complementation of deletion mutants by cloned Tn7 fragments indicates the existence of two regions, denoted tnp7A and tnp7B, required for all transposition events. Another region, denoted tnp7C, is required for transposition from the chromosome to RP1 but not for transposition from a small IncP-1 replicon to the chromosome. The presence of Tn7S terminal sequences in an RP1 replicon reduces the transposition of a second Tn7S derivative from the chromosome by about one order of magnitude. The measured frequency of Tn7S transpositions from a small IncP-1 replicon to the chromosome depends on the particular incompatibility system used to eliminate that replicon. Genetic and physical data indicate that high frequencies of Tn7S transposition to the chromosome (40%) are triggered by the IncP-1 incompatibility reaction, thus suggesting the existence of a Tn7 mechanism for sensing the state of the carrier replicon.     

Transposition and transduction of plasmid DNA inStreptomyces spp.

Summary To expand the application of molecular genetics to many different streptomycete species, we have been developing two potentially widely applicable methodologies: transposon mutagenesis and plasmid transduction. We constructed three transposons from theStreptomyces lividans insertion sequence IS493. Tn5096 and Tn5097 contain an apramycin resistance gene inserted in different orientations between the two open reading frames of IS493. These transposons transpose from different plasmids into many different sites in theStreptomyces griseofuscus chromosome and into its resident linear plasmids. Tn5099 contains a promoterlessxylE gene and a hygromycin-resistance gene inserted in IS493 close to one end. Tn5099 transposes inS. griseofuscus giving operon fusions in some cases that drive expression of thexylE gene product, catechol deoxygenase, giving yellow colonies in the presence of catechol. We have also developed plasmid vectors that can be transduced into many streptomycete species by bacteriophage FP43. We describe the characterization of FP43 and mapping of several bacteriophage functions. The region of cloned FP43 DNA essential for plasmid transduction includes the origin for headful packaging.     

Identification of Tn4430, a transposon of Bacillus thuringiensis functional in Escherichia coli

Summary The mobile genetic element Tn4430, originating from the gram-positive bacterium, Bacillus thuringiensis, and previously described as the Th-sequence, is the first transposon isolated from the genus Bacillus. In the present work a gene (APH-III) conferring resistance to kanamycin was inserted into this 4.2 kb transposon. Transposition experiments showed that Tn4430APH-III could transpose in the gram-negative host Escherichia coli when its insertion functions were supplied by an intact copy of Tn4430. By transposing Tn4430APH-III directly onto pBR322, it was possible to determine the nucleotide sequence of the terminal inverted repeats of Tn4430 and of the target DNA site. Identical 38 bp in inverted orientation are situated at each end of the transposon and there is a direct duplication of 5 bp at the insertion site. Thus, it is clear that Tn4430 is closely related to the transposons belonging to the Tn3 family (class II elements).     

Bradyrhizobium japonicum mutants defective in root-nodule bacteroid development and nitrogen fixation

The genome of the slow-growing Bradyrhizobium japonicum (strain 110) was mutagenized with transposon Tn5. A total of 1623 kanamycin/streptomycin resistant derivatives were screened in soybean infection tests for nodulation (Nod) and symbiotic nitrogen fixation (Fix). In this report we describe 14 strains possessing a stable, reproducible Nod⁺Fix^- phenotype. These strains were also grown under microaerobic culture conditions to test them for free-living nitrogen fixation activity (Nif). In addition to strains having reduced Fix and Nif activities, there were also strains that had reduced symbiotic Fix activity but were Nif⁺ ex planta.Analysis of the genomic structure revealed that the majority of the strains had a single Tn5 insertion without any further apparent physical alteration. A few strains had additional insertions (by Tn5 or IS50), or a deletion, or had cointegrated part of the vector used for Tn5 mutagenesis. One of the insertions was found in a known nif gene (nifD) whereas all other mutations seem to affect different, hitherto unknown genes or operons.Several mutant strains had an altered nodulation phenotype, inducing numerous, small, widely distributed nodules. Light and electron microscopy revealed that most of these mutants were defective in different stages of bacteroid development and/or bacteroid persistence. The protein patterns of the mutants were inspected by two-dimensional gel electrophoresis after labelling microaerobic cultures with l-(³⁵S)methionine. Of particular interest were mutants lacking a group of proteins the synthesis of which was known to be under oxygen control. Such strains can be regarded as potential regulatory mutants.     

Use of Transposon-Transposase Complexes To Create Stable Insertion Mutant Strains of Francisella tularensis LVS

Francisella tularensis is a highly virulent zoonotic bacterial pathogen capable of infecting numerous different mammalian species, including humans. Elucidation of the pathogenic mechanisms of F. tularensis has been hampered by a lack of tools to genetically manipulate this organism. Herein we describe the use of transposome complexes to create insertion mutations in the chromosome of the F. tularensis live vaccine strain (LVS). A Tn5-derived transposon encoding kanamycin resistance and lacking a transposase gene was complexed with transposase enzyme and transformed directly into F. tularensis LVS by electroporation. An insertion frequency of 2.6 × 10⁻⁸ ± 0.87 × 10⁻⁸ per cell was consistently achieved using this method. There are 178 described Tn5 consensus target sites distributed throughout the F. tularensis genome. Twenty-two of 26 transposon insertions analyzed were within known or predicted open reading frames, but none of these insertions was associated with the Tn5 target site. Analysis of the insertions of sequentially passed strains indicated that the transposons were maintained stably at the initial insertion site after more than 270 generations. Therefore, transformation by electroporation of Tn5-based transposon-transposase complexes provided an efficient mechanism for generating random, stable chromosomal insertion mutations in F. tularensis.     

A collection of sequenced and mapped Ds transposon insertion sites in Arabidopsis thaliana

Insertional mutagenesis is a powerful tool for generating knockout mutations that facilitate associating biological functions with as yet uncharacterized open reading frames (ORFs) identified by genomic sequencing or represented in EST databases. We have generated a collection of Dissociation(Ds) transposon lines with insertions on all 5 Arabidopsischromosomes. Here we report the insertion sites in 260 independent single-transposon lines, derived from four different Ds donor sites. We amplified and determined the genomic sequence flanking each transposon, then mapped its insertion site by identity of the flanking sequences to the corresponding sequence in the Arabidopsisgenome database. This constitutes the largest collection of sequence-mapped Ds insertion sites unbiased by selection against the donor site. Insertion site clusters have been identified around three of the four donor sites on chromosomes 1 and 5, as well as near the nucleolus organizers on chromosomes 2 and 4. The distribution of insertions between ORFs and intergenic sequences is roughly proportional to the ratio of genic to intergenic sequence. Within ORFs, insertions cluster near the translational start codon, although we have not detected insertion site selectivity at the nucleotide sequence level. A searchable database of insertion site sequences for the 260 transposon insertion sites is available at http://sgio2.biotec.psu.edu/sr. This and other collections of Arabidopsislines with sequence-identified transposon insertion sites are a valuable genetic resource for functional genomics studies because the transposon location is precisely known, the transposon can be remobilized to generate revertants, and the Ds insertion can be used to initiate further local mutagenesis.     

pTn5cat:A Tn5-Derived Genetic Element to Facilitate Insertion Mutagenesis, Promoter Probing, Physical Mapping, Cloning, and Marker Exchange in Phytopathogenic and Other Gram-Negative Bacteria

A Tn5-derived mobile element has been constructed to identify genes and promoters related to pathogenesis and virulence inPseudomonas syringaepv.phaseolicola.To enhance the rate of mutation this Tn5derivative was constructed carrying a mutant transposase which was placed incisto the transposable element, but just outside the inverted repeats, therefore eliminating secondary transposition and increasing the stability of the insertion. The new element also contains a promoterlesscat(chloramphenicol acetyltransferase) gene as reporter to allow for positive selection of promoters being expressed under specific conditions. To facilitate cloning and manipulations inEscherichia coli,a ColE1 origin of replication has been included within the transposable element as well as the Mob region from the broad-host-range plasmid RP4, which allows this element to be efficiently mobilized by a triparental mating or by using anE. colistrain such as S17-1 to provide thetrafunctions. Sites for the rare cuttersPacI andPmeI have also been included to facilitate locating the insertions on aPacI and/orPmeI physical map. This construction combines the properties of both a mobilizable plasmid and a transposon and therefore has been termed pTn5cat.It is almost the same size as the wild-type Tn5, 5877 bp, and has successfully been tested inP.s. phaseolicolaandXanthomonas campestrispv.campestris.     

Establishment of an Arbitrary PCR for Rapid Identification of Tn917 Insertion Sites in Staphylococcus epidermidis: Characterization of Biofilm-Negative and Nonmucoid Mutants

Transposon mutagenesis with the Enterococcus faecalis transposon Tn917 is a genetic approach frequently used to identify genes related with specific phenotypes in gram-positive bacteria. We established an arbitrary PCR for the rapid and easy identification of Tn917 insertion sites in Staphylococcus epidermidis with six independent, well-characterized biofilm-negative Tn917 transposon mutants, which were clustered in the icaADBC gene locus or harbor Tn917 in the regulatory gene rsbU. For all six of these mutants, short chromosomal DNA fragments flanking both transposon ends could be amplified. All fragments were sufficient to correctly identify the Tn917 insertion sites in the published S. epidermidis genomes. By using this technique, the Tn917 insertion sites of three not-yet-characterized biofilm-negative or nonmucoid mutants were identified. In the biofilm-negative and nonmucoid mutant M12, Tn917 is inserted into a gene homologous to the regulatory gene purR of Bacillus subtilis and Staphylococcus aureus. The Tn917 insertions of the nonmucoid but biofilm-positive mutants M16 and M20 are located in genes homologous to components of the phosphoenolpyruvate-sugar phosphotransferase system (PTS) of B. subtilis, S. aureus, and Staphylococcus carnosus, indicating an influence of the PTS on the mucoid phenotype in S. epidermidis.     

Tn5 insertion specificity is not influenced by IS50 end sequences in target DNA.

Summary The bacterial transposon Tn5 inserts into dozens of sites in a gene, some of which are used preferentially (hotspots). Features of certain sites and precedents provided by several other transposons had suggested that sequences in target DNA corresponding to the ends of Tn5 or of its component IS50 elements might facilitate transposition to these sites. We tested this possibility using derivatives of plasmid pBR322 carrying IS50 I or O end sequences. Tn5 inserted frequently into an IS50 I end at the major hotspot in pBR322, but not into either an I end or an O end 230 by away from this hotspot. Adenine (dam) methylation at GATC sequences in the I end segment interferes with its use as the end of a transposon, but a dam ^– mutation did not affect Tn5 insertion relative to an I end sequence in target DNA. These results support models in which the ability of Tn5 to find its preferred sites depends on several features of DNA sequence and conformation, and in which target selection is distinct from recognition of the element ends during transposition.     

On the evolution of Tn21-like multiresistance transposons: sequence analysis of the gene (aacC1) for gentamicin acetyltransferase-3-I(AAC(3)-I), another member of the Tn21-based expression cassette

Summary The aminoglycoside-3-O-acetyltransferase-I gene (aacC1) from R plasmids of two incompatibility groups (R1033 [Tn1696], and R135) was cloned and sequenced. In the case of R1033, it was shown that theaacC gene is coded by a precise insertion of 833 bp between theaadA promoter and its structural gene in a Tn21 related transposon (Tn1696). This insertion occurs at the same target sequence as that of the OXA-1 β-lactamase gene insertion in Tn2603. Upstream of theaacC gene, we found an open reading frame (ORF) which is probably implicated in the site-specific recombinational events involved in the evolution of this family of genetic elements. These results provide additional confirmation of the role of Tn21 elements as naturally occurring interspecific transposition and expression casssettes.     

A practical random mutagenesis system for probiotic Lactobacillus casei using Tn5 transposition complexes

Aims: Despite the fact that the entire genome sequence of probiotic Lactobacillus casei has recently been available, their mechanisms of beneficial effects are poorly clarified, probably because of the lack of an efficient mutagenesis system. The aim of this study was to establish a practical random mutagenesis system of L. casei using the Tn5 transposome complexes. Methods and Results: We optimized the conditions for transformation using a plasmid pUCYIT356‐1‐Not2 and then transposition reaction using Tn5 transposome system for L. casei ATCC 27139. Tn5 insertion library of this strain being consisted of 9408 mutants was constructed by repeating the mutagenesis procedure. To examine the utility of this mutagenesis system, we screened a panel of insertion mutants for nutrient requirements. Six auxotrophic mutants were isolated and their Tn5 insertion sites were determined by inverse PCR, which demonstrated that insertions occur randomly throughout the whole bacterial genome. Conclusions: Tn5 transposome system functioned efficiently to generate transposon insertion mutants of L. casei and enabled to construct useful L. casei Tn5 insertion library at optimized conditions for transformation and transposition. Significance and Impact of the Study: The availability of this system facilitates the study of the mechanisms of beneficial effects of L. casei for human health.     

The new class 11 transposon Tn163 is plasmid-borne in two unrelated Rhizobium leguminosarum biovar viciae strains

Tn163 is a transposable element identified in Rhizobium leguminosarum bv. viciae by its high insertion rate into positive selection vectors. The 4.6 kb element was found in only one further R. leguminosarum bv. viciae strain out of 70 strains investigated. Both unrelated R. leguminosarum bv. viciae strains contained one copy of the transposable element, which was localized in plasmids native to these strains. DNA sequence analysis revealed three large open reading frames (ORFs) and 38 bp terminal inverted repeats. ORF1 encodes a putative protein of 990 amino acids displaying strong homologies to transposases of class 11 transposons. ORF2, transcribed in the opposite direction, codes for a protein of 213 amino acids which is highly homologous to DNA invertases and resolvases of class II transposons. Homology of ORF1 and ORF2 and the genetic structure of the element indicate that Tn163 can be classified as a class II transposon. It is the first example of a native transposon in the genus Rhizobium. ORF3, which was found not to be involved in the transposition process, encodes a putative protein (256 amino acids) of unknown function. During transposition Tn163 produced direct repeats of 5 bp, which is typical for transposons of the Tn3 family. However, one out of the ten insertion sites sequenced showed a 6 by duplication of the target DNA; all duplicated sequences were A/T rich. Insertion of Tn163 into the sacB gene revealed two hot spots. Chromosomes of different R. leguminosarum bv. viciae strains were found to be highly refractory to the insertion of Tn163.     

The Tn5 bleomycin resistance gene confers improved survival and growth advantage on Escherichia coli

The bleomycin resistance gene (ble) of transposon Tn5 is known to decrease the death rate of Escherichia coli during stationary phase. Bleomycin is a DNA-damaging agent and bleomycin resistance is produced by improved DNA repair which also requires the host genes aidC and polA coding, respectively, for an alkylation-inducible gene product and DNA polymerase I. In the absence of the drug, this DNA repair system is believed to cause the slower death rate of bleomycin-resistant bacteria. In this study, the effect of ble and aidC genes on the viability of bacteria and their growth rate in chemostat competitions was studied. The results indicate, that bleomycin-resistant bacteria display greater fitness under these conditions. Another beneficial effect of transposon Tn5 had been previously attributed to the insertion sequence IS50R. We were not able to reproduce this result with IS50R, however, the complete transposon was beneficial under similar conditions. Moreover, we showed the Tn5 fitness effect to be aidC-dependent. The ble gene was discovered after the fitness effect of IS50R had been established; it has not previously been considered to mediate the beneficial effect of Tn5. This possibility is discussed based on the molecular mechanism of bleomycin resistance.     

The terminal inverted repeats of the linear plasmid SCP1 of Streptomyces coelicolor A3(2) possess a truncated copy of the transposon Tn 4811 of Streptomyces lividans 66

Streptomyces coelicolor A3(2), the best genetically studied streptomycete and Streptomyces lividans 66 are very closely related strains. This is further emphasized by our finding that a truncated copy of Tn4811 of S. lividans is present in the terminal inverted repeats of the S. coelicolor giant linear plasmid SCP1. The copy of Tn4811 in SCP1 lacks the first 1276 bp and shows only minor changes in the nucleotide sequence of the remaining 4.12 kb. Tn4811 exists in both ends of SCP1.     

Specificity of Transposon Tn5 Insertion

Genetic mapping studies had shown that the bacterial transposon Tn5 can insert into many sites in a gene, but that some sites are preferred. To begin understanding Tn5's insertion specificity at the molecular level, we selected transpositions of Tn5 from the Escherichia coli chromosome to the plasmid pBR322 and analyzed the resultant pBR322::Tn5 plasmids by restriction endonuclease digestion and DNA sequencing. Seventy-five insertions in the tet gene were found at 28 sites including one major hotspot (with 21 insertions) and four lesser hotspots (with four to ten insertions each). All five hotspots are within the first 300 of the 1250-base pair (bp) tet gene. In contrast, 31 independent insertions in the amp gene were found in at least 27 distinct sites.—Tn5 generates 9 bp target sequence duplications when it transposes. Such transposon-induced duplications are generally taken to indicate that cleavages of complementary target DNA strands are made 9 bp apart during transposition. DNA sequence analysis indicated that GC base pairs occupy positions 1 and 9 in the duplications at each of the five hotspots examined, suggesting a GC-cutting preference during Tn5 transposition.     

Insertions of Tn5 linked to mutations affecting carotenoid synthesis inMyxococcus xanthus

Summary We have characterized severalMyxococcus xanthus mutants in which carotenoid synthesis is affected. Six of them produce carotenoids in the absence of visible light, an absolute requirement for carotenogenesis in wild-type strains, and thus will be referred to as constitutive mutants. The six corresponding mutations have been mapped by transductional analysis mediated by linked Tn5 insertions. Five of the mutations have been localized to a single locus, closely linked to Tn5 insertion ΩMR136 and loosely linked to ΩDK4611. The sixth mutation, present in strain MR7, is linked to Tn5 insertion ΩMR134. Another Tn5 insertion site (ΩDK2836) has been characterized and found to be linked to the MR7 colour mutation and to ΩMR134. Darkor light-grown cultures of strains carrying the Tn5 insertion ΩDK2836 do not produce carotenoids even if they simultaneously carry any of the constitutive mutations.