Dimerization specificity of P22 and 434 repressors is determined by multiple polypeptide segments.

The repressor protein of bacteriophage P22 binds to DNA as a homodimer. This dimerization is absolutely required for DNA binding. Dimerization is mediated by interactions between amino acids in the carboxyl (C)-terminal domain. We have constructed a plasmid, p22CT-1, which directs the overproduction of just the C-terminal domain of the P22 repressor (P22CT-1). Addition of P22CT-1 to DNA-bound P22 repressor causes the dissociation of the complex. Cross-linking experiments show that P22CT-1 forms specific heterodimers with the intact P22 repressor protein, indicating that inhibition of P22 repressor DNA binding by P22CT-1 is mediated by the formation of DNA binding-inactive P22 repressor:P22CT-1 heterodimers. We have taken advantage of the highly conserved amino acid sequences within the C-terminal domains of the P22 and 434 repressors and have created chimeric proteins to help identify amino acid regions required for dimerization specificity. Our results indicate that the dimerization specificity region of these proteins is concentrated in three segments of amino acid sequence that are spread across the C-terminal domain of each of the two phage repressors. We also show that the set of amino acids that forms the cooperativity interface of the P22 repressor may be distinct from those that form its dimer interface. Furthermore, cooperativity studies of the wild-type and chimeric proteins suggest that the location of cooperativity interface in the 434 repressor may also be distinct from that of its dimerization interface. Interestingly, changes in the dimer interface decreases the ability of the 434 repressor to discriminate between its wild-type binding sites, O(R)1, O(R)2, and O(R)3. Since 434 repressor discrimination between these sites depends in large part on the ability of this protein to recognize sequence-specific differences in DNA structure and flexibility, this result indicates that the C-terminal domain is intimately involved in the recognition of sequence-dependent differences in DNA structure and flexibility.     

Independent and interchangeable multimerization domains of the AbrB, Abh, and SpoVT global regulatory proteins

The global regulators AbrB, Abh, and SpoVT are paralogous proteins showing their most extensive sequence homologies in the DNA-binding amino-terminal regions (about 50 residues). The carboxyl-terminal portion of AbrB has been hypothesized to be a multimerization domain with little if any role in DNA-binding recognition or specificity. To investigate the multimerization potentials of the carboxyl-terminal portions of AbrB, Abh, and SpoVT we utilized an in vivo multimerization assay system based upon fusion of the domains to the DNA binding domain of the lambda cI repressor protein. The results indicate that the N and C domains of all three paralogues are independent dimerization modules and that the intact Abh and SpoVT proteins are most probably tetramers. Chimeric proteins consisting of the AbrB N-terminal DNA-binding domain fused to the C domain of either Abh or SpoVT are indistinguishable from wild-type AbrB in their ability to regulate an AbrB target promoter in vivo.     

Cloning of the immunity repressor determinant of bacteriophage P2 in the pBR322 plasmid

Summary Through in vitro recombination of DNA restriction fragments, we have constructed a plasmid, which expresses in vivo the immunity repressor gene (C) of bacteriophage P2. A bacterial strain carrying such a plasmid showed a high level of P2 specific immunity. It was lysogenized normally by an infecting P2. but the frequency of spontaneous phage production was reduced about 10⁴ fold as compared to a normal P2 lysogen. Satellite phage P4, known to derepress P2 lysogens, was unable to derepress the plasmid-carrying lysogenic strain so to allow growth of coinfecting P2. Phage P4 multiplied on the plasmid-carrying. P2-lysogenic strain, but due to a prolonged latent period failed to form plaques on this strain.     

Detection of presenilin-1 homodimer formation in intact cells using fluorescent lifetime imaging microscopy

Presenilin-1 (PS1) is a multipass transmembrane domain protein, which is believed to be the catalytic component of the gamma-secretase complex. The complex is comprised of four major components: PS1, nicastrin, Aph-1, and Pen-2. The exact stoichiometric relationship between the four components remains unclear. It has been shown that gamma-secretase exists as high molecular weight complexes, suggesting the possibility of dimer/multimer formation. We combined a biochemical approach with a novel morphological microscopy assay to analyze PS1 dimer formation and subcellular distribution in situ, in intact mammalian cells. Both coimmunoprecipitation and fluorescent lifetime imaging microscopy approaches showed that wildtype PS1 molecules form dimers. Moreover, PS1 holoproteins containing the D257A mutation also come into close enough proximity to form a dimer, suggesting that cleavage within the loop is not necessary for dimer formation. Taken together these data suggest that PS1 dimerization occurs during normal PS1 function.     

Crystal structure of a prokaryotic replication initiator protein bound to DNA at 2.6 A resolution.

The initiator protein (RepE) of F factor, a plasmid involved in sexual conjugation in Escherichia coli, has dual functions during the initiation of DNA replication which are determined by whether it exists as a dimer or as a monomer. A RepE monomer functions as a replication initiator, but a RepE dimer functions as an autogenous repressor. We have solved the crystal structure of the RepE monomer bound to an iteron DNA sequence of the replication origin of plasmid F. The RepE monomer consists of topologically similar N- and C-terminal domains related to each other by internal pseudo 2-fold symmetry, despite the lack of amino acid similarities between the domains. Both domains bind to the two major grooves of the iteron (19 bp) with different binding affinities. The C-terminal domain plays the leading role in this binding, while the N-terminal domain has an additional role in RepE dimerization. The structure also suggests that superhelical DNA induced at the origin of plasmid F by four RepEs and one HU dimer has an essential role in the initiation of DNA replication.     

Flexibility of KorA,a plasmid-encoded,global transcription regulator,in the presence and the absence of its operator

The IncP (Incompatibility group P) plasmids are important carriers in the spread of antibiotic resistance across Gram-negative bacteria. Gene expression in the IncP-1 plasmids is stringently controlled by a network of four global repressors, KorA, KorB, TrbA and KorC interacting cooperatively. Intriguingly, KorA and KorB can act as co-repressors at varying distances between their operators, even when they are moved to be on opposite sides of the DNA. KorA is a homodimer with the 101-amino acid subunits, folding into an N-terminal DNA-binding domain and a C-terminal dimerization domain. In this study, we have determined the structures of the free KorA repressor and two complexes each bound to a 20-bp palindromic DNA duplex containing its consensus operator sequence. Using a combination of X-ray crystallography, nuclear magnetic resonance spectroscopy, SAXS and molecular dynamics calculations, we show that the linker between the two domains is very flexible and the protein remains highly mobile in the presence of DNA. This flexibility allows the DNA-binding domains of the dimer to straddle the operator DNA on binding and is likely to be important in cooperative binding to KorB. Unexpectedly, the C-terminal domain of KorA is structurally similar to the dimerization domain of the tumour suppressor p53.     

Stability of the dimerization domain effects the cooperative DNA binding of short peptides

The basic region peptide derived from the basic leucine zipper protein GCN4 bound specifically to the native GCN4 binding sequences in a dimeric form when the beta-cyclodextrin/adamantane dimerization domain was introduced at the C-terminus of the GCN4 basic region peptide. We describe here how the structure and stability of the dimerization domain affect the cooperative formation of the peptide dimer-DNA complex. The basic region peptides with five different guest molecules were synthesized, and their equilibrium dissociation constants with a peptide possessing beta-cyclodextrin were determined. These values, ranging from 1.3 to 15 microM, were used to estimate the stability of the complexes between the dimers with various guest/cyclodextrin dimerization domains and GCN4 target sequences. An efficient cooperative formation of the dimer complexes at the GCN4 binding sequence was observed when the adamantyl group was replaced with the norbornyl or noradamantyl group, but not with the cyclohexyl group that formed a beta-cyclodextrin complex with a stability that was 1 order of magnitude lower than that of the adamantyl group. Thus, cooperative formation of the stable dimer-DNA complex appeared to be effected by the stability of the dimerization domain. For the peptides that cooperatively formed dimer-DNA complexes, there was no linear correlation between the stability of the inclusion complex and that of the dimer-DNA complex. With the beta-cyclodextrin/adamantane dimerization domain, the basic region peptide dimer preferred to bind to a palindromic 5'-ATGACGTCAT-3' sequence over the sequence lacking the central G.C base pair and that with an additional G.C base pair in the middle. Changing the adamantyl group into a norbornyl group did not alter the preferential binding of the peptide dimers to the palindromic sequence, but slightly affected the selectivity of the dimer for other nonpalindromic sequences. The helical contents of the peptides in the DNA-bound dimer with the adamantyl group were decreased by reducing the stability of the dimer-DNA complex, which was possibly caused by deformation of the helical structure proximal to the dimerization domain.     

Recognition of DNA structure by 434 repressor.

In complexes of bacteriophage 434 binding sites with 434 repressor the central 4 bp of the 14 bp site are not contacted by the protein, although changes in these bases alter binding site affinity for the repressor. Our previous data suggested that the ability of the non-contacted central bases to be overtwisted in repressor-DNA complexes governs affinity of the binding site for 434 repressor. This idea was tested by examining the affinity of two central sequence variant 434 binding sites for 434 repressor as a function of binding site average twist. The 434 repressor preferred the relatively overwound binding site to the two more underwound forms. The greatest affinity enhancement resulting from increasing twist was observed with a binding site that is relatively underwound and more resistant to twisting deformation. Consistent with the idea that 434 repressor overtwists its binding site upon DNA binding, we show that 434 repressor is capable of binding to sites bearing a single base insertion in their center (a 15mer), but binds poorly to binding sites bearing central base deletions (12mer and 13mer). The N-terminal dimer interface plays a large role in determining 434 repressor central base preferences. Mutations in this interface eliminate central base discrimination and/or site size preferences. These mutations also lead to changes in the size of the repressor footprint on the various sized DNA sites that are consistent with their binding characteristics.     

Functional domains of the penicillinase repressor of Bacillus licheniformis.

The penicillinase repressor (PENI) negatively regulates expression of the penicillinase gene (penP) in Bacillus licheniformis by binding to its operators located within the promoter region of penP.penI codes for a protein with 128 amino acids. Filter-binding analyses suggest that the active form of the repressor is a dimer. Genetic analyses of PENI derivatives showed that the repressor carrying either a 6-amino-acid deletion near the N terminus or a 14-amino-acid deletion at the C terminus was functionally inactive in vivo. A repressor derivative carrying a 6-amino-acid deletion within its N-terminal region was extensively purified and used in DNA footprinting and subunit cross-linking analyses. The results of these studies showed that the repressor derivative had lost its ability to bind operator specifically even though it could dimerize effectively. In similar studies, we demonstrated that an N-terminal portion of PENI with a molecular mass of 10 kDa derived by digestion with papain was able to bind operator specifically but with reduced affinity and had completely lost its ability to dimerize. These data suggest that the repressor has two functional and separable domains. The amino-terminal domain of the repressor is responsible for operator recognition, and the carboxyl-terminal domain is involved in subunit dimerization.     

Dimerization of the operator binding domain of phage lambda repressor

Dimerization of lambda repressor is required for its binding to operator DNA. As part of a continuing study of the structural basis of the coupling between dimer formation and operator binding, we have undertaken 1H NMR and gel filtration studies of the dimerization of the N-terminal domain of lambda repressor. Five protein fragments have been studied: three are wild-type fragments of different length (1-102, 1-92, and 1-90), and two are fragments bearing single amino acid substitutions in residues involved in the dimer interface (1-102, Tyr-88----Cys; 1-92, Ile-84----Ser). The tertiary structure of each species is essentially the same, as monitored by the 1H NMR resonances of internal aromatic groups. However, significant differences are observed in their dimerization properties. 1H NMR resonances of aromatic residues that are involved in the dimer contact allow the monomer-dimer equilibrium to be monitored in solution. The structure of the wild-type dimer contact appears to be similar to that deduced from X-ray crystallography and involves the hydrophobic packing of symmetry-related helices (helix 5) from each monomer. Removal of two contact residues, Val-91 and Ser-92, by limited proteolysis disrupts this interaction and also prevents crystallization. The Ile-84----Ser substitution also disrupts this interaction, which accounts for the severely reduced operator affinity of this mutant protein.     

Quaternary structure and function in phage lambda repressor: 1H-NMR studies of genetically altered proteins

The quaternary structure and dynamics of phage lambda repressor are investigated in solution by 1H-NMR methods. lambda repressor contains two domains separable by proteolysis: an N-terminal domain that mediates sequence-specific DNA-A binding, and a C-terminal domain that contains strong dimer and higher-order contacts. The active species in operator recognition is a dimer. Although the crystal structure of an N-terminal fragment has been determined, the intact protein has not been crystallized, and there is little evidence concerning its structure. 1H-NMR data indicate that the N-terminal domain is only loosely tethered to the C-terminal domain, and that its tertiary structure is unperturbed by proteolysis of the "linker" polypeptide. It is further shown that in the intact repressor structure a quaternary interaction occurs between N-terminal domains. This domain-domain interaction is similar to the dimer contact observed in the crystal structure of the N-terminal fragment and involves the hydrophobic packing of symmetry-related helices (helix 5). In the intact structure this interaction is disrupted by the single amino-acid substitution, Ile84----Ser, which reduces operator affinity at least 100-fold. We conclude that quaternary interactions between N-terminal domains function to appropriately orient the DNA-binding surface with respect to successive major grooves of B-DNA.     

Control of gene expression in plant cells using a 434:VP16 chimeric protein

The herpes simplex virus type 1 VP16 polypeptide is a potent trans-activator of viral gene expression. We have tested the ability of the VP16 activation domain to activate gene expression in plant cells. A plasmid encoding a translational fusion between the full-length 434 repressor and the C-terminal 80 amino acids of VP16, was constructed. When expressed in Escherichia coli, the chimeric protein binds efficiently to 434-binding motifs (operators). For expression in plant cells, the chimeric activator gene was placed between the cauliflower mosaic virus (CaMV) 35S promoter and nos terminator sequences in a pUC-based plasmid. The 434 operators were placed upstream of a minimal CaMV 35S promoter linked to the E. coli gus reporter gene. This reporter-expression cassette was then incorporated into the same plasmid as the 434 cI/VP16 activator-expression cassette. Two control plasmids were also constructed, one encoding the 434 protein with no activator domain and the second a chimeric activator with no DNA-binding domain. The chimeric activator was tested for its ability to activate gene expression in a tobacco protoplast transient assay system. Results are presented to show that we can obtain in plant cells significant activation of gene expression that is dependent on both DNA-binding and the presence of the activator domain.