Comparison of bisulfite modification of 5-methyldeoxycytidine and deoxycytidine residues.

Sodium bisulfite is a mutagen which can specifically deaminate more than 96% of the cytosine residues in single-stranded DNA via formation of a 5,6-dihydrocytosine-6-sulfonate intermediate. Under the same reaction conditions, only 2-3% of the 5-methylcytosine (m5Cyt) residues in single-stranded XP-12 DNA, which has 34 mole% m5Cyt, was converted to thymine (Thy) residues. In contrast, at the deoxynucleoside and free base levels, the same treatment with bisulfite and then alkali converted 51% and > 95%, respectively, of the m5Cyt to the corresponding Thy derivatives. However, the rate of reaction of m5Cyt and its deoxyribonucleoside was much slower than that of the analogous quantitative conversion of cytosine or deoxycytidine to uracil or deoxyuridine, respectively. The much lower reactivity of m5Cyt and its derivatives compared to that of the unmethylated analogs is primarily due to a decrease in the rate of formation of the sulfonate adduct.     

Modification of polyuridylic acid by bisulfite. II: Studies on ribosomal binding and enzymatic hydrolysis

The reaction of polyuridylic acid with sodium bisulfite produces modified polymers in which up to 95% of the uracil residues have been converted to uracil-6-sulfonate residues. A 91.6% bisulfite-saturated polymer was found to resist hydrolysis by spleen phosphodiesterase and phosphorolysis by polynucleotide phosphorylase. Digestion by pancreatic ribonuclease was successful and gave the bisulfite adduct of uridine-3-phosphate. Treatment of this nucleotide adduct with acid phosphatase afforded the bisulfite adduct of uridine. The ability of polyuridylic acid to bind to ribosomes, and to stimulate the binding of phenylalanine tRNA to ribosomes was abolished by progressive bisulfite saturation of the polymer. The rate of decline of these functionsf with increasing bisulfite content, was less sharp than the loss of phenyl-alanine coding ability o, the modified polymer.     

The role of bisulfite in the debromination of 5-bromouracil. The debromination of 5-bromo-5,6-dihydrouracil-6-sulfonate

5-Bromouracil is dehalogenated in the presence of bisulfite buffers to yield uracil which subsequently adds bisulfite to form 5,6-dihydrouracil-6-sulfonate. Presumably, 5-bromo-5,6-dihydrouracil-6-sulfonate is an intermediate in uracil formation. Kinetic data indicate that the disappearance of 5-bromouracil in the presence of bisulfite buffers is second order with respect to total bisulfite concentration, thus indicating the participation of 2 moles of either sulfite or bisulfite in the overall reaction, Iodometric titrations of total bisulfite combined with spectral analysis of the various pyrimidine and dihydropyrimidine species present indicate that, in addition to the total bisulfite required to form 5,6-dihydrouracil-6-sulfonate, an additional mole of sulfite is consumed per mole of 5-bromouracil dehalogenated. These data combined with the finding that sulfate is generated during dehalogenation are indicative of a pathway for the dehalogenation of the intermediate 5-bromo-5,6-dihydro-uracil-6-sulfonate which involves the attack of sulfite either directly or via an intervening molecule of water to yield uracil. Subsequent reactions of halogen-containing intermediates yield sulfate and bromide as final products of the reaction.     

The effect of bisulfite on the dehalogenation of 5-chloro-, 5-bromo-, and 5-iodouracil

The 5-chloro-, bromo-, and iodo-analogs of uracil are dehalogenated in the presence of sodium bisulfite to yield 5,6 dihydrouracil-6-sulfonate as the final product. Under similar conditions, 5-fluorouracil adds bisulfite to yield 5-fluoro-5,6 dihydrouracil-6-sulfonate but is not dehalogenated. Ultraviolet absorption spectra of 5-bromouracil and 5-iodouracil reacting under pseudo first-order conditions with bisulfite indicate that dehalogenation proceeds via a pathway which has 5-halo-5,6-dihydrouracil-6-sulfonate and uracil as intermediates. In the case of 5-chlorouracil, the rate of bisulfite attack on the 6-position of the chlorouracil ring system is very slow relative to the rate of bisulfite addition to uracil. Hence, although dechlorination does occur, ultraviolet absorption spectra of reaction mixtures containing bisulfite and 5-chlorouracil do not reveal the uracil absorption peak observed with both 5-iodouracil and 5-bromouracil. Fluorine and proton nmr spectra indicate that bisulfite addition to 5-fluorouracil is stereoselective as is the case of bisulfite addition to uracil.     

Modification of E. coli ribosomes and coliphage MS2 RNA by bisulfite: effects on ribosomal binding and protein synthesis.

The reaction of E. coli 70s ribosomes with 0.2 M NaH-35 s03 (pH 7.1, 3.5hrs, 37 degree) led to the conversion of 4.5% of the uracil residues of the R, RNA into 5.6-dihydrouracil-6-sulfonate residues. The modified ribosomes exhibited a significant decrease in their ability to bind (14-C)-phenylalanyl-(RNA-phe and to incorporate (14-C)-phenylalanine into protein in the presence of polyuridylic acid. The ability of the modified ribosomes to form an initiation complex as measured by the A-U-G or coliphage MS2 RNA dependent binding of (14-C)-fmet-tRNA-fmet was also impaired, as was their ability to incorporate (14-C) lysine into protein with MS2 RNA as messenger. Treatment os MS RNA with 0.2 M sodium (35-S) bisulfite, pH 7.0 at 25 degrees C resulted in the substitution of 2.7% and 6.2% of the uracil residues by bisulfite after 1 and 3.5 hrs of reaction, respectively. Impairment of function of the MS2 RNA in both initiation complex formation and transplantation assays was observed. These reactions of uracil residues of mRNA and rRNA may be a cause of biological damage inflicted by sodium bisulfite and sulfur dioxide.     

Effect of temperature on the creatine kinase equilibrium.

The effect of temperature on the apparent equilibrium constant of creatine kinase (ATP:creatine N-phosphotransferase (EC 2.7.3.2)) was determined. At equilibrium the apparent K' for the biochemical reaction was defined as [formula: see text] The symbol sigma denotes the sum of all the ionic and metal complex species of the reactant components in M. The K' at pH 7.0, 1.0 mM free Mg2+, and ionic strength of 0.25 M at experimental conditions was 177 +/- 7.0, 217 +/- 11, 255 +/- 10, and 307 +/- 13 (n = 8) at 38, 25, 15, and 5 degrees C, respectively. The standard apparent enthalpy or heat of the reaction at the specified conditions (delta H' degree) was calculated from a van't Hoff plot of log10K' versus 1/T, and found to be -11.93 kJ mol-1 (-2852 cal mol-1) in the direction of ATP formation. The corresponding standard apparent entropy of the reaction (delta S' degree) was +4.70 J K-1 mol-1. The linear function (r2 = 0.99) between log10 K' and 1/K demonstrates that both delta H' degree and delta S' degree are independent of temperature for the creatine kinase reaction, and that delta Cp' degree, the standard apparent heat capacity of products minus reactants in their standard states, is negligible between 5 and 38 degrees C. We further show from our data that the sign and magnitude of the standard apparent Gibbs energy (delta G' degree) of the creatine kinase reaction was comprised mostly of the enthalpy of the reaction, with 11% coming from the entropy T delta S' degree term. The thermodynamic quantities for the following two reference reactions of creatine kinase were also determined. [formula: see text] The delta H degree for Reaction 2 was -16.73 kJ mol-1 (-3998 cal mol-1) and for Reaction 3 was -23.23 kJ mol-1 (-5552 cal mol-1) over the temperature range 5-38 degrees C. The corresponding delta S degree values for the reactions were +110.43 and +83.49 J K-1 mol-1, respectively. Using the delta H' degree of -11.93 kJ mol-1, and one K' value at one temperature, a second K' at a second temperature can be calculated, thus permitting bioenergetic investigations of organs and tissues using the creatine kinase equilibria over the entire physiological temperature range.     

Reaction of cytidine with semicarbazide in the presence of bisulfite. A rapid modification specific for single-stranded polynucleotide.

Semicarbazide reacted rapidly with 5,6-dihydrocytidine-6-sulfonate, which was formed from cytidine by addition of bisulfite across the 5,6-double bond. The transaminated product, 5,6-dihydro-4-semicarbazido-2-ketotopyrimidine-6-sulfonate ribofuranoside, was identified by comparison with that formed by treatment of 4-semicarbazido-2-ketopyrimidine ribofuranoside with bisulfite. The progress of the transamination was monitored spectrophotometrically by use of a strong absorbance of the product in alkali. The reaction between cytidine and the semicarbazide-bisulfite mixture was optimal at pH 4.5. Complete transformation of cytidine into the product required only 5 min with the use of 3M semicarbazide-1M sodium bisulfite, pH 5.0, at the reaction temperature 37 degrees C. The product was stable in unbuffered solution but in phosphate buffers it underwent elimination of bisulfite to give 4-semicarbazido-2-ketopyrimidine ribofuranoside. The rate of the elimination at pH 7.0 and 37 degrees C increased proportionally with the increase of the phosphate concentration. Complete elimination was obtained by treatment with 1 M sodium phosphate for 2 h. When heat-denatured calf-thymus DNA was treated with 3 M semicarbazide-1 M bisulfite at 37 degrees C and pH 5.0 the transamination of reactive cytosine residues was completed by 10 min of incubation. At 20 degrees C, it required 85 min of incubation. Cytosine residues in native DNA did not react at all even by prolonged incubations. The modified DNA samples were further treated with a phosphate buffer at pH 7, producing 4-semicarbazido-2-ketopyrimidine residues in the DNA. Analysis of the base compositions of these samples by perchloric acid hydrolysis showed that the modification was selective to cytosine, which had been expected from studies with monomers. It also showed that the reactive cytosine residues in the denatured DNA, constitute about 80% of the total cytosine, which was consistent with the view that heat-denatured DNA still contains a considerable amount of secondary structure. The semicarbazide-bisulfite modification is expected to be a sensitive method to locate cytosine residues in single-stranded regions of polynucleotides.     

Recognition of a cytosine base lesion by a human damage-specific DNA binding protein.

Sodium bisulfite reacts with cytosine and 5-methylcytosine, forming the 5,6-dihydrosulfonate adducts which deaminate to the uracil and thymine adducts, respectively. At alkaline pH, the sulfonate groups are then released, generating uracil and thymine. In DNA, the resulting G:U and G:T base mismatches generated are potential sites of mutagenesis. Using a human damage-specific DNA binding protein as a probe, we have found protein-recognizable lesions in bisulfite-treated DNA and poly d(I-C), but not in treated poly d(A-T) or poly d(A-U). Although this suggests that the lesion recognized is cytosine-derived, there was no correlation between the number of uracils induced and the number of binding sites, suggesting that the protein-bound damage is not a uracil-containing mismatch. Modification of the treatment protocol to reduce elimination of the bisulfite from the base adducts increased the level of binding, suggesting that the protein recognizes a base-sulfonate adduct.     

Pulse radiolytic studies of radicals produced from methylated uracils via oxidation by SO4.

Using a pulse radiolysis technique, some nucleic base radicals were produced by the reactions of sulfate radical, SO4-, with 1-, 3-, 5-, and 6-methyluracils, and their optical and kinetic natures were observed. All of their absorption spectra showed main peaks at approximately 400 nm with absorption constants ranging from 1020 to approximately 1560 dm3 mol-1 cm-1. The rate constants of their formation were 1.6 to approximately 3.3 X 10(9) dm3 mol-1 s-1. For thymine and 6-methyluracil, the absorption coefficients of their radicals at approximately 500 nm changed according to pH, giving pK values of approximately 9. For N(3)-methylated uracil, on the other hand, no such acid-base equilibrium was found. When the N(1) position was methylated, another type of pH effect was found. From these spectral observations and the comparative discussions, it was shown that methylation at the N(1) position gives OH-adduct radicals and at other positions proton-released radicals. For 3- and 6-methyluracils, second intermediates were formed concomitantly with the disappearance of the initial radicals. They are tentatively assigned to their ring-opened radicals, presumably by the reaction of the initial radicals with S2O8(2-).     

Formaldehyde as a probe of DNA structure. II. Reaction with endocyclic imino groups of DNA bases.

We describe the equilibrium and kinetic aspects of the formaldehyde reaction with the endocyclic imino groups of derivatives of thymine, uracil, and a series of halogenated uracils, as well as poly(uridylic acid) and poly(inosinic acid). The main results are: (i) the equilibrium constants for forming a hydroxymethyl adduct remain quite constant at about 2-2.5 (M-1) for all the compounds studied, independent of their pK; (ii) both forward and reverse rate constants with 5'-TMP are specific base catalyzed in the pH range of about 4-9; (iii) the response of the rate constants to temperature and to several solvent additives are measured; (iv) at neutral pH, for the series of pyrimidine compounds, a linear free energy relation is observed between the logarithm of both the forward and the reverse rate constant and the pK for deprotonation; (v) the unstructured polynucleotides, poly(U) and poly(I) react very similarly to their constituent monomers; (vi) a reaction mechanism is proposed; and (vii) some implications for polynucleotide studies are discussed. In an appendix, a method of spectral analysis is derived to obtain accurate estimates of the quite small equilibrium constants; this should be applicable to all similar two-component systems in which the final product is unobtainable, either by isolation or by saturation. Together with the results of the previous paper on the formaldehyde reaction with exocyclic amino groups (J. D. McGhee and P. H. von Hippel, preceding paper), these results form a reasonably comprehensive account of the basic chemical controls required to use formaldehyde as a quantitative probe of DNA structure.     

Thermolysis of coenzymes B12 at physiological temperatures: activation parameters for cobalt-carbon bond homolysis and a quantitative analysis of the perturbation of the homolysis equilibrium by the ribonucleoside triphosphate reductase from Lactobacillus leichmannii

The kinetics of the thermolysis of 5'-deoxyadenosylcobalamin (AdoCbl, coenzyme B12) in aqueous solution, pH 7.5, have been studied in the temperature range 30-85 degrees C using AdoCbl tritiated at the adenine C2 position and the method of initial rates. Combined with a careful analysis of the distribution of adenine-containing products, the results permit the dissection of the competing rate constants for carbon-cobalt bond homolysis and heterolysis. After correction for the temperature-dependent occurrence of the much less reactive base-off species of AdoCbl, the activation parameters for homolysis of the base-on species were found to be delta H++homo,on = 33.8 +/- 0.2 kcal mol-1 and delta S++homo,on = 13.5 +/- 0.7 cal mol-1 K-1, values not significantly different from those determined by Hay and Finke (J. Am. Chem. Soc. 108 (1986) 4820), in the temperature range 85-115 degrees C. In contrast, the heterolysis of base-on AdoCbl was characterized by a much smaller enthalpy of activation (delta H++het,on = 18.5 +/- 0.2 kcal mol-1) and a negative entropy of activation (delta S++het,on = -34.0 +/- 0.7 cal mol-1 K-1) so that heterolysis, which is minor pathway at elevated temperatures, is the dominant pathway for AdoCbl decomposition at physiological temperatures. Using literature values for the rate constant for the reverse reaction, the equilibrium constant for AdoCbl homolysis at 37 degrees C was calculated to be 7.9 x 10(-18). Comparison with the equilibrium constant for this homolysis at the active site of the ribonucleoside triphosphate reductase from Lactobacillus leichmannii shows that the enzymes shifts the equilibrium constant towards homolysis products by a factor of 2.9 x 10(12) (17.7 kcal mol-1) by binding the thermolysis products with an equilibrium constant of 7.1 x 10(16) M-2, compared to the bonding constant for AdoCbl of 2.4 x 10(4) M-1.     

Thermodynamics of the conversion of fumarate to L-(-)-malate

The thermodynamics of the conversion of aqueous fumarate to L-(-)-malate has been investigated using both heat conduction microcalorimetry and a gas chromatographic method for determining equilibrium constants. The reaction was carried out in aqueous Tris-HCl buffer over the pH range 6.3-8.0, the temperature range 25-47 degrees C, and at ionic strengths varying from 0.0005 to 0.62 mol kg-1. Measured enthalpies and equilibrium ratios have been adjusted to zero ionic strength and corrected for ionization effects to obtain the following standard state values for the conversion of aqueous fumarate 2- to malate 2- at 25 degrees C: K = 4.20 +/- 0.05, delta G degrees = -3557 +/- 30 J mol-1, delta H degrees = -15670 +/- 150 J mol-1, and delta C degrees p = -36 +/- J mol-1 K-1. Equations are given which allow one to calculate the combined effects of pH and temperature on equilibrium constants and enthalpies of this reaction.     

Bioenergetics of the formyl-methanofuran dehydrogenase and heterodisulfide reductase reactions in Methanothermobacter thermautotrophicus.

The synthesis of formyl-methanofuran and the reduction of the heterodisulfide (CoM-S-S-CoB) of coenzyme M (HS-CoM) and coenzyme B (HS-CoB) are two crucial, H2-dependent reactions in the energy metabolism of methanogenic archaea. The bioenergetics of the reactions in vivo were studied in chemostat cultures and in cell suspensions of Methanothermobacter thermautotrophicus metabolizing at defined dissolved hydrogen partial pressures ( pH2). Formyl-methanofuran synthesis is an endergonic reaction (DeltaG degrees ' = +16 kJ.mol-1). By analyzing the concentration ratios between formyl-methanofuran and methanofuran in the cells, free energy changes under experimental conditions (DeltaG') were found to range between +10 and +35 kJ.mol-1 depending on the pH2 applied. The comparison with the sodium motive force indicated that the reaction should be driven by the import of a variable number of two to four sodium ions. Heterodisulfide reduction (DeltaG degrees ' = -40 kJ.mol-1) was associated with free energy changes as high as -55 to -80 kJ.mol-1. The values were determined by analyzing the concentrations of CoM-S-S-CoB, HS-CoM and HS-CoB in methane-forming cells operating under a variety of hydrogen partial pressures. Free energy changes were in equilibrium with the proton motive force to the extent that three to four protons could be translocated out of the cells per reaction. Remarkably, an apparent proton translocation stoichiometry of three held for cells that had been grown at pH2<0.12 bar, whilst the number was four for cells grown above that concentration. The shift occurred within a narrow pH2 span around 0.12 bar. The findings suggest that the methanogens regulate the bioenergetic machinery involved in CoM-S-S-CoB reduction and proton pumping in response to the environmental hydrogen concentrations.     

Thermodynamics of the denaturation of pepsinogen by urea.

The denaturation of swine pepsinogen has been studied as a function of urea concentration, pH, and temperature. The unfolding of the protein by urea has been found to be fully reversible under different conditions of pH, temperature, and denaturant concentration. Kinetic experiments have shown that the transition shows two-state behavior at 25 degrees C in the pH range 6-8 covered in this study. Analysis of the equilibrium data obtained at 25 degrees C according to Tanford (Tanford, C. (1970), Adv. Protein Chem. 24, 1) and Pace (Pace, N.C. (1975), Crit. Rev. Biochem. 3, 1) leads to the conclusion that the free energy of stabilization of native pepsinogen, relative to the denatured state, under physiological conditions, is only 6-12 kcal mol-1. The temperature dependence of the equilibrium constant for the unfolding of pepsinogen by urea in the range 20-50 degrees C at pH 8.0 can be described by assigning the following values of thermodynamic parameters for the denaturation at 25 degrees C: deltaH=31.5 kcal mol-1; deltaS=105 cal deg-1 mol-1; and deltaCp=5215 cal deg-1 mol-1.     

Thermodynamics of the hydrolysis of sucrose

A thermodynamic investigation of the hydrolysis of sucrose to fructose and glucose has been performed using microcalorimetry and high-pressure liquid chromatography. The calorimetric measurements were carried out over the temperature range 298-316 K and in sodium acetate buffer (0.1 M, pH 5.65). Enthalpy and heat capacity changes were obtained for the hydrolysis of aqueous sucrose (process A): sucrose(aq) + H2O(liq) = glucose(aq) + fructose (aq). The determination of the equilibrium constant required the use of a thermochemical cycle calculation involving the following processes: (B) glucose 1-phosphate2-(aq) = glucose 6-phosphate2-(aq); (C) sucrose(aq) + HPO4(2-)(aq) = glucose 1-phosphate2-(aq) + fructose(aq); and (D) glucose 6-phosphate2-(aq) + H2O(liq) = glucose(aq) + HPO4(2-)(aq). The equilibrium constants determined at 298.15 K for processes B and C are 17.1 +/- 1.0 and 32.4 +/- 3.0, respectively. Equilibrium data for process D was obtained from the literature, and in conjunction with the data for processes B and C, used to calculate a value of the equilibrium constant for the hydrolysis of aqueous sucrose. Thus, for process A, delta G0 = -26.53 +/- 0.30 kJ mol-1, K0 = (4.44 +/- 0.54) x 10(4), delta H0 = -14.93 +/- 0.16 kJ mol-1, delta So = 38.9 +/- 1.2 J mol-1 K-1, and delta CoP = 57 +/- 14 J mol-1 K-1 at 298.15 K. Additional thermochemical cycles that bear upon the accuracy of these results are examined.     

Interaction of cytidine 3'-monophosphate and uridine 3'-monophosphate with ribonuclease a at the denaturation temperature

Differential scanning calorimetry (DSC) measurements were performed on the thermal denaturation of ribonuclease a and ribonuclease a complexed with an inhibitor, cytidine or uridine 3'-monophosphate, in sodium acetate buffered solutions. Thermal denaturation of the complex results in dissociation of the complex into denatured ribonuclease a and free inhibitor. Binding constants of the inhibitor to ribonuclease a were determined from the increase in the denaturation temperature of ribonuclease a in the complexed form and from the denaturation enthalpy of the complex. Binding enthalpies of the inhibitor to ribonuclease a were determined from the increase in the denaturation enthalpy of ribonuclease a complexed with the inhibitor. For the cytidine inhibitor in 0.2 M sodium acetate buffered solutions, the binding constants increase from 87 +/- 8 M-1 (pH 7.0) to 1410 +/- 54 M-1 (pH 5.0), while the binding enthalpies increase from 17 +/- 13 kJ mol-1 (pH 4.7) to 79 +/- 15 kJ mol-1 (pH 5.5). For the uridine inhibitor in 0.2 M sodium acetate buffered solutions, the binding constants increase from 104 +/- 1 M-1 (pH 7.0) to 402 +/- 7 M-1 (pH 5.5), while the binding enthalpies increase from 16 +/- 5 kJ mol-1 (pH 6.0) to 37 +/- 4 kJ mol-1 (pH 7.0). The binding constants and enthalpies of the cytidine inhibitor in 0.05 M sodium acetate buffered solutions increase respectively from 328 +/- 37 M-1 (pH 6.5) to 2200 +/- 364 M-1 (pH 5.5) and from 22 kJ mol-1 (pH 5.5) to 45 +/- 7 kJ mol-1 (pH 6.5). the denaturation transition cooperativities of the uncomplexed and complexed ribonuclease a were close to unity, indicating that the transition is two state with a stoichiometry of 1.(ABSTRACT TRUNCATED AT 250 WORDS)     

An investigation of the equilibria between aqueous ribose, ribulose, and arabinose

The thermodynamics of the equilibria between aqueous ribose, ribulose, and arabinose were investigated using high-pressure liquid chromatography and microcalorimetry. The reactions were carried out in aqueous phosphate buffer over the pH range 6.8-7.4 and over the temperature range 313.15-343.75 K using solubilized glucose isomerase with either Mg(NO3)2 or MgSO4 as cofactors. The equilibrium constants (K) and the standard state Gibbs energy (delta G degrees) and enthalpy (delta H degrees) changes at 298.15 K for the three equilibria investigated were found to be: ribose(aq) = ribulose(aq) K = 0.317, delta G degrees = 2.85 +/- 0.14 kJ mol-1, delta H degrees = 11.0 +/- 1.5 kJ mol-1; ribose(aq) = arabinose(aq) K = 4.00, delta G degrees = -3.44 +/- 0.30 kJ mol-1, delta H degrees = -9.8 +/- 3.0 kJ mol-1; ribulose(aq) = arabinose(aq) K = 12.6, delta G degrees = -6.29 +/- 0.34 kJ mol-1, delta H degrees = -20.75 +/- 3.4 kJ mol-1. Information on rates of the above reactions was also obtained. The temperature dependencies of the equilibrium constants are conveniently expressed as R in K = -delta G degrees 298.15/298.15 + delta H degrees 298.15[(1/298.15)-(1/T)] where R is the gas constant (8.31441 J mol-1 K-1) and T the thermodynamic temperature.     

Role of uracil-DNA glycosylase in the repair of deaminated cytosine residues of DNA in Escherichia coli.

Uracil-DNA glycosylase, which acts specifically on uracil-containing DNA, was purified 250-fold from an extract of Escherichia coli 1100. The enzyme releases free uracil from DNA, producing alkali-labile apyrimidinic sites in the DNA. The enzyme is active on both native and heat-denatured DNA of phage PBS1, which contains uracil in place of thymine. piX174 DNA which had been treated with bisulfite and then at alkaline pH was susceptible to the action of uracil-DNA glycosylase. Since DNA treated with bisulfite alone was less susceptible to the enzyme, it is likely that the enzyme recognizes deaminated cytosine, namely uracil, but not bisulfite adducts of uracil and cytosine in the treated DNA. DNA treated with nitrite or hydroxylamine was not attacked by the enzyme. Enzyme activity acting on bisulfite-treated DNA was absent from an extract of E. coli mutant BD10 (ung). The mutant exhibited higher sensitivity to bisulfite than did the wild-type strain and was unable to reactivate phage T1 pre-exposed to bisulfite and weak alkali.     

The reactivity of tryptophan residues in proteins. Stopped-flow kinetics of fluorescence quenching.

The quenching of tryptophan fluorescence by N-bromosuccinamide, studied by the fluorescence stopped-flow technique, was used to compare the reactivities of tryptophan residues in protein molecules. The reaction of N-bromosuccinamide with the indole group of N-acetyltryptophanamide, a model compound for bound tryptophan, followed second-order kinetics with a rate constant of (7.8 +/- 0.8) . 10(5) dm3 . mol-1 . s-1 at 23 degrees C. The rate does not depend on ionic strength or on the pH near neutrality. The non-fluorescent intermediate formed from N-acetyltryptophanamide on the reaction with N-bromosuccinamide appears to be a bromohydrin compound. The second-order rate constant for fluorescence quenching of tryptophan in Gly-Trp-Gly by N-bromosuccinamide was very similar, (8.8 +/- 0.8) . 10(5) dm3 . mol-1 . s-1. Apocytochrome c has the conformation of a random coil with the single tryptophan largely exposed to the solvent. The rate constant for the fluorescence quenching of the tryptophan in apocytochrome c by N-bromosuccinamide was (3.7 +/- 0.3) . 10(5) dm3 . mol-1 . s-1. The fluorescence quenching by N-bromosuccinamide of the tryptophan residues incorporated in alpha-chymotrypsin at pH 7.0 showed three exponential terms from which the following rate constants were derived: 1.74 . 10(5), 0.56 . 10(5) and 0.11 . 10(5) dm3 . mol-1 . s-1. This protein is known to have eight tryptophan residues in the native state, six residues at the surface, and two buried. Three of the surface tryptophans have the indole rings protruding out of the molecule and may account for the fastest kinetic phase of the quenching process. The intermediate phase may be due to three surface tryptophans whose indole rings point inwards, and the slowest to the two interior tryptophan residues.     

The reaction between the superoxide anion radical and cytochrome c.

1. The superoxide anion radical (O2-) reacts with ferricytochrome c to form ferrocytochrome c. No intermediate complexes are observable. No reaction could be detected between O2- and ferrocytochrome c. 2. At 20 degrees C the rate constant for the reaction at pH 4.7 to 6.7 is 1.4-10(6) M-1. S -1 and as the pH increases above 6.7 the rate constant steadily decreases. The dependence on pH is the same for tuna heart and horse heart cytochrome c. No reaction could be demonstrated between O2- and the form of cytochrome c which exists above pH approximately 9.2. The dependence of the rate constant on pH can be explained if cytochrome c has pKs of 7.45 and 9.2, and O2- reacts with the form present below pH 7.45 with k = 1.4-10(6) M-1 - S-1, the form above pH 7.45 with k = 3.0- 10(5) M-1 - S-1, and the form present above pH 9.2 with k = 0. 3. The reaction has an activation energy of 20 kJ mol-1 and an enthalpy of activation at 25 degrees C of 18 kJ mol-1 both above and below pH 7.45. It is suggested that O2- may reduce cytochrome c through a track composed of aromatic amino acids, and that little protein rearrangement is required for the formation of the activated complex. 4. No reduction of ferricytochrome c by HO2 radicals could be demonstrated at pH 1.2-6.2 but at pH 5.3, HO2 radicals oxidize ferrocytochrome c with a rate constant of about 5-10(5)-5-10(6) M-1 - S-1.