Depolymerization of actin microfilaments in the I--Z--I brushes of transverse striated muscles by using DNAse I

To release Z-discs of skeletal muscles myofibrils from actin microfilaments, I--Z--I-brushes (complexes of Z-discs and thin filaments) were treated with DNAse I-both in suspension and on electron microscopical grids. It was shown that such a treatment resulted in depolymerization of actin filaments. The preparations obtained were heterogeneous and contained I--Z--I-brushes with shorter actin filaments and single Z-discs. The structure of Z-discs released from actin filament remained intact. Therefore these preparations may be used in studies on regulation of actin microfilaments assembly.     

The mechanochemical basis of amoeboid movement: II. Cytoplasmic filament stability at low divalent cation concentrations

The role played by Ca²⁺ in the stability of cytoplasmic actin and myosin filaments was investigated ultrastructurally with negatively stained isolated cytoplasm from Chaos carolinensis. Cytoplasm was incubated in solutions containing 5, 10, 15 and 25 mM EGTA for periods of time varying from 2 to 20 min. As either the EGTA concentration or duration of incubation was increased, the extent of myosin and actin filament depolymerization increased. The actin filaments depolymerized except where they were stabilized by interaction with myosin. With longer incubation times or higher EGTA concentrations complete depolymerization of the actin filaments could be accomplished. Myosin aggregates also disassembled and became shorter, while monomeric myosin labelled adjacent thin filaments to form arrowhead complexes resembling myosin enriched actomyosin [1]. These actomyosin complexes were relatively stable at low Ca²⁺ concentrations. In addition, the complexes showed a characteristic 35 nm periodicity and were dissociable in the presence of Mg²⁺-ATP. The actin containing filaments were more labile at low Ca²⁺ concentrations than the myosin aggregates. These results suggest that in cells capable of regulating their Ca²⁺ concentrations efficiently, filament polymerization-depolymerization could play a role in the control of cytoplasmic streaming.     

Conformation of beta 2-microglobulin amyloid fibrils analyzed by reduction of the disulfide bond

Beta2-microglobulin (beta2-m), a major component of dialysis-related amyloid fibrils, has an intrachain disulfide bond buried inside the native structure. We examined the conformation of beta2-m amyloid fibrils by analyzing the reactivity of the disulfide bond to a reducing reagent, dithiothreitol. Although the disulfide bond in the native structure was highly protected from reduction, the disulfide bonds in the amyloid fibrils prepared at pH 2.5 were progressively reduced at pH 8.5 by 50 mm dithiothreitol. Because beta2-m amyloid fibrils prepared under acidic conditions have been known to depolymerize at a neutral pH, we examined the relation between depolymerization and reduction of the disulfide bond. The results indicate that the disulfide bonds in the amyloid fibrils were protected from reduction, and the reduction occurred during depolymerization. On the other hand, the disulfide bonds of immature filaments, the thin and flexible filaments prepared under conditions of high salt at pH 2.5, were reduced at pH 8.5 more readily than those of amyloid fibrils, suggesting that the disulfide bonds are exposed to the solvent. Taken together, the disulfide bond once exposed to the solvent upon acid denaturation may be progressively buried in the interior of the amyloid fibrils during its formation.     

利用激光AFM和TEM探索肌动蛋白体外自装配聚合结构

细胞内肌动蛋白(actin)通过与actin结合蛋白(actin binding proteins,ABPs)相互作用,形成以F-actin为基础多种ABPs参与装配的高度有序的超分子聚合结构,行使各种重要生理功能。在体外聚合条件下,不存在F-actin稳定剂时纯化的actin主要通过自装配形成大尺度的聚集堆积结构;这种表观无序的结构体系由于被认为不具备细胞功能活性而受到忽视。利用激光原子力显微镜(atomic force microscope,AFM)和透射电子显微镜(transmission electron microscope,TEM)技术,对actin体外通过自装配过程形成的大尺度聚集结构进行了细致的观察和分析。研究发现,actin在体外通过自装配过程除了形成无序的蛋白堆积物之外,还能够聚合形成复杂的离散结构,包括树状分支的纤维丛、无规卷曲的纤维簇以及具有不同直径的长纤维等;这些大尺度纤维复合物明显不同于在ABPs或过量F-actin稳定剂参与下形成的由单根微丝和微丝束构成的聚合结构。表明无ABPs或F-actin稳定剂存在的情况下,体外聚合的F-actin在一定条件下可进一步聚集缠绕形成复杂的纤维结构或无序的蛋白堆积物。事实上,actin自装配过程反映了其固有的聚合热力学特性,深入探索将有助于理解ABPs在体内actin超分子聚合结构体系装配中的调控作用及其分子机制。     

Tropomyosin inhibits ADF/cofilin-dependent actin filament dynamics

Tropomyosin binds to actin filaments and is implicated in stabilization of actin cytoskeleton. We examined biochemical and cell biological properties of Caenorhabditis elegans tropomyosin (CeTM) and obtained evidence that CeTM is antagonistic to ADF/cofilin-dependent actin filament dynamics. We purified CeTM, actin, and UNC-60B (a muscle-specific ADF/cofilin isoform), all of which are derived from C. elegans, and showed that CeTM and UNC-60B bound to F-actin in a mutually exclusive manner. CeTM inhibited UNC-60B-induced actin depolymerization and enhancement of actin polymerization. Within isolated native thin filaments, actin and CeTM were detected as major components, whereas UNC-60B was present at a trace amount. Purified UNC-60B was unable to interact with the native thin filaments unless CeTM and other associated proteins were removed by high-salt extraction. Purified CeTM was sufficient to restore the resistance of the salt-extracted filaments from UNC-60B. In muscle cells, CeTM and UNC-60B were localized in different patterns. Suppression of CeTM by RNA interference resulted in disorganized actin filaments and paralyzed worms in wild-type background. However, in an ADF/cofilin mutant background, suppression of CeTM did not worsen actin organization and worm motility. These results suggest that tropomyosin is a physiological inhibitor of ADF/cofilin-dependent actin dynamics.     

A platelet inhibitor protein with cytochalasin-like activity against actin polymerization in vitro

We have obtained an inhibitor fraction containing cytochalasin-like activity from human platelets. Using a procedure involving DEAE-cellulose, hydroxyapatite and gel filtration column chromatography, we obtained a fraction from human platelets which apparently can compete with 3H--cytochalasin B for binding to spectrin-actin complexes from human erythrocytes. The inhibitor activity is nondialyzable, sensitive to heat and to trypsin and has a Stoke's radius of 40 A. This fraction stops nuclei-induced actin polymerization in 0.4 mM MgCl2 and reduces the viscosity of F actin to that of G actin, which suggests depolymerization of the filaments. These results suggest that the inhibitor fraction contains a protein which interacts with actin filaments and nuclei in a manner similar to that of cytochalasin B. It is possible that such a protein is involved in the control of cell motility by affecting assembly and disassembly of actin-containing microfilaments in vivo.     

Stoichiometry and stability of caldesmon in native thin filaments from sheep aorta smooth muscle.

Ca2(+)-regulated native thin filaments were extracted from sheep aorta smooth muscle. The caldesmon content determined by quantitative gel electrophoresis was 0.06 caldesmon molecule/actin monomer (1 caldesmon molecule per 16.3 actin monomers). Dissociation of caldesmon and tropomyosin from the thin filament and the depolymerization of actin was measured by sedimenting diluted thin filaments. Actin critical concentration was 0.05 microM at 10.1 and 0.13 at 10.05 compared with 0.5 microM for pure F-actin. Tropomyosin was tightly bound, with half-maximal dissociation at less than 0.3 microM thin filaments (actin monomer) under all conditions. Caldesmon dissociation was independent of tropomyosin and not co-operative. The concentration of thin filaments where 50% of the caldesmon was dissociated (CD50) ranged from 0.2 microM (actin monomer) at 10.03 to 8 microM at 10.16 in a 5 mM-MgCl2, pH 7.1, buffer. Mg2+, 25 mM at constant I, increased CD50 4-fold. CD50 was 4-fold greater at 10(-4) M-Ca2+ than at 10(-9) M-Ca2+. Aorta heavy meromyosin (HMM).ADP.Pi complex (2.5 microM excess over thin filaments) strongly antagonized caldesmon dissociation, but skeletal-muscle HMM.ADP.Pi did not. The behaviour of caldesmon in native thin filaments was indistinguishable from caldesmon in reconstituted synthetic thin filaments. The variability of Ca2(+)-sensitivity with conditions observed in thin filament preparations was shown to be related to dissociation of regulatory caldesmon from the thin filament.     

Kinetic analysis of F-actin depolymerization in polymorphonuclear leukocyte lysates indicates that chemoattractant stimulation increases actin filament number without altering the filament length distribution

The rate of filamentous actin (F-actin) depolymerization is proportional to the number of filaments depolarizing and changes in the rate are proportional to changes in filament number. To determine the number and length of actin filaments in polymorphonuclear leukocytes and the change in filament number and length that occurs during the increase in F-actin upon chemoattractant stimulation, the time course of cellular F-actin depolymerization in lysates of control and peptide-stimulated cells was examined. F-actin was quantified by the TRITC-labeled phalloidin staining of pelletable actin. Lysis in 1.2 M KCl and 10 microM DNase I minimized the effects of F-actin binding proteins and G-actin, respectively, on the kinetics of depolymerization. To determine filament number and length from a depolymerization time course, depolymerization kinetics must be limited by the actin monomer dissociation rate. Comparison of time courses of depolymerization in the presence (pointed ends free) or absence (barbed and pointed ends free) of cytochalasin suggested depolymerization occurred from both ends of the filament and that monomer dissociation was rate limiting. Control cells had 1.7 +/- 0.4 x 10(5) filaments with an average length of 0.29 +/- 0.09 microns. Chemo-attractant stimulation for 90 s at room temperature with 0.02 microM N-formylnorleucylleucylphenylalanine caused a twofold increase in F-actin and about a two-fold increase in the total number of actin filaments to 4.0 +/- 0.5 x 10(5) filaments with an average length of 0.27 +/- 0.07 microns. In both cases, most (approximately 80%) of the filaments were quite short (less than or equal to 0.18 micron). The length distributions of actin filaments in stimulated and control cells were similar.     

ARP2 and ARP3 are localized to sites of actin filament nucleation in tobacco BY-2 cells

Summary. Complete depolymerization of actin filaments (AFs) at low temperature (0 °C) is followed by the formation of transient actin structures at 25 °C in tobacco BY-2 cells (Nicotiana tabacum L.). Using antibodies against fission yeast actin-related proteins (ARP2 and ARP3), we show here that transient actin structures (dots, dotted filaments, rods) colocalize with epitopes stained by these antibodies and thus are likely to represent sites of actin filament nucleation (SANs). In contrast to the cold-induced disassembly of AFs, no transient actin structures were detectable during recovery of AFs from latrunculin B-induced depolymerization. However, the staining pattern obtained with ARP antibodies in latrunculin B-treated cells was similar to that in controls and cold-treated cells. This suggests that, in addition to the complete depolymerization of AFs, disruption of other cellular structures is needed for the formation of transient actin structures during the early phase of recovery from cold treatment. Correspondence and reprints: Department of Plant Physiology, Faculty of Science, Charles University, Viničná 5, 128 44 Prague 2, Czech Republic.     

Coordinated regulation of actin filament turnover by a high-molecular-weight Srv2/CAP complex, cofilin, profilin, and Aip1

BACKGROUND: Dynamic remodeling of the actin cytoskeleton requires rapid turnover of actin filaments, which is regulated in part by the actin filament severing/depolymerization factor cofilin/ADF. Two factors that cooperate with cofilin are Srv2/CAP and Aip1. Human CAP enhances cofilin-mediated actin turnover in vitro, but its biophysical properties have not been defined, and there has been no in vivo evidence reported for its role in turnover. Xenopus Aip1 forms a cofilin-dependent cap at filament barbed ends. It has been unclear how these diverse activities are coordinated in vivo. RESULTS: Purified native yeast Srv2/CAP forms a high molecular weight structure comprised solely of actin and Srv2. The complex is linked to actin filaments via the SH3 domain of Abp1. Srv2 complex catalytically accelerates cofilin-dependent actin turnover by releasing cofilin from ADP-actin monomers and enhances the ability of profilin to stimulate nucleotide exchange on ADP-actin. Yeast Aip1 forms a cofilin-dependent filament barbed end cap, disrupted by the cof1-19 mutant. Genetic analyses show that specific combinations of activities mediated by cofilin, Srv2, Aip1, and capping protein are required in vivo. CONCLUSIONS: We define two genetically and biochemically separable functions for cofilin in actin turnover. One is formation of an Aip1-cofilin cap at filament barbed ends. The other is cofilin-mediated severing/depolymerization of filaments, accelerated indirectly by Srv2 complex. We show that the Srv2 complex is a large multimeric structure and functions as an intermediate in actin monomer processing, converting cofilin bound ADP-actin monomers to profilin bound ATP-actin monomers and recycling cofilin for new rounds of filament depolymerization.     

Arp2/3 complex and actin depolymerizing factor/cofilin in dendritic organization and treadmilling of actin filament array in lamellipodia.

The leading edge (approximately 1 microgram) of lamellipodia in Xenopus laevis keratocytes and fibroblasts was shown to have an extensively branched organization of actin filaments, which we term the dendritic brush. Pointed ends of individual filaments were located at Y-junctions, where the Arp2/3 complex was also localized, suggesting a role of the Arp2/3 complex in branch formation. Differential depolymerization experiments suggested that the Arp2/3 complex also provided protection of pointed ends from depolymerization. Actin depolymerizing factor (ADF)/cofilin was excluded from the distal 0.4 micrometer++ of the lamellipodial network of keratocytes and in fibroblasts it was located within the depolymerization-resistant zone. These results suggest that ADF/cofilin, per se, is not sufficient for actin brush depolymerization and a regulatory step is required. Our evidence supports a dendritic nucleation model (Mullins, R.D., J.A. Heuser, and T.D. Pollard. 1998. Proc. Natl. Acad. Sci. USA. 95:6181-6186) for lamellipodial protrusion, which involves treadmilling of a branched actin array instead of treadmilling of individual filaments. In this model, Arp2/3 complex and ADF/cofilin have antagonistic activities. Arp2/3 complex is responsible for integration of nascent actin filaments into the actin network at the cell front and stabilizing pointed ends from depolymerization, while ADF/cofilin promotes filament disassembly at the rear of the brush, presumably by pointed end depolymerization after dissociation of the Arp2/3 complex.     

Species-Specific Functions of Twinfilin in Actin Filament Depolymerization

Twinfilin is a highly conserved member of the actin depolymerization factor homology (ADF-H) protein superfamily, which also includes ADF/Cofilin, Abp1/Drebrin, GMF, and Coactosin. Twinfilin has a unique molecular architecture consisting of two ADF-H domains joined by a linker and followed by a C-terminal tail. Yeast Twinfilin, in conjunction with yeast cyclase-associated protein (Srv2/CAP), increases the rate of depolymerization at both the barbed and pointed ends of actin filaments. However, it has remained unclear whether these activities extend to Twinfilin homologs in other species. To address this, we purified the three mouse Twinfilin isoforms (mTwf1, mTwf2a, mTwf2b) and mouse CAP1, and used total internal reflection fluorescence microscopy assays to study their effects on filament disassembly. Our results show that all three mouse Twinfilin isoforms accelerate barbed end depolymerization similar to yeast Twinfilin, suggesting that this activity is evolutionarily conserved. In striking contrast, mouse Twinfilin isoforms and CAP1 failed to induce rapid pointed end depolymerization. Using chimeras, we show that the yeast-specific pointed end depolymerization activity is specified by the C-terminal ADF-H domain of yeast Twinfilin. In addition, Tropomyosin decoration of filaments failed to impede depolymerization by yeast and mouse Twinfilin and Srv2/CAP, but inhibited Cofilin severing. Together, our results indicate that Twinfilin has conserved functions in regulating barbed end dynamics, although its ability to drive rapid pointed end depolymerization appears to be species-specific. We discuss the implications of this work, including that pointed end depolymerization may be catalyzed by different ADF-H family members in different species.     

Assembly and Turnover of Short Actin Filaments by the Formin INF2 and Profilin

INF2 (inverted formin 2) is a formin protein with unique biochemical effects on actin. In addition to the common formin ability to accelerate actin nucleation and elongation, INF2 can also sever filaments and accelerate their depolymerization. Although we understand key attributes of INF2-mediated severing, we do not understand the mechanism by which INF2 accelerates depolymerization subsequent to severing. Here, we show that INF2 can create short filaments (<60 nm) that continuously turn over actin subunits through a combination of barbed end elongation, severing, and WH2 motif-mediated depolymerization. This pseudo-steady state condition occurs whether starting from actin filaments or monomers. The rate-limiting step of the cycle is nucleotide exchange of ADP for ATP on actin monomers after release from the INF2/actin complex. Profilin addition has two effects: 1) to accelerate filament turnover 6-fold by accelerating nucleotide exchange and 2) to shift the equilibrium toward polymerization, resulting in longer filaments. In sum, our findings show that the combination of multiple interactions of INF2 with actin can work in concert to increase the ATP turnover rate of actin. Depending on the ratio of INF2:actin, this increased flux can result in rapid filament depolymerization or maintenance of short filaments. We also show that high concentrations of cytochalasin D accelerate ATP turnover by actin but through a different mechanism from that of INF2.     

Kinetic analysis of F-actin depolymerization in the presence of platelet gelsolin and gelsolin-actin complexes

Platelet gelsolin (G), a 90,000-mol-wt protein, binds tightly to actin (A) and calcium at low ionic strength to form a 1:2:2 complex, GA2Ca2 (Bryan, J., and M. Kurth, 1984, J. Biol. Chem. 259:7480-7487). Chromatography of actin and gelsolin mixtures in EGTA-containing solutions isolates a stable binary complex, GA1Ca1 (Kurth, M., and J. Bryan, 1984, J. Biol. Chem. 259:7473-7479). The effects of platelet gelsolin and the binary gelsolin-actin complex on the depolymerization kinetics of rabbit skeletal muscle actin were studied by diluting pyrenyl F-actin into gelsolin or complex-containing buffers; a decrease in fluorescence represents disassembly of filaments. Dilution of F- actin to below the critical concentration required for filament assembly gave a biphasic depolymerization curve with both fast and slow components. Dilution into buffers containing gelsolin, as GCa2, increased the rate of depolymerization and gave a first order decay. The rate of decrease in fluorescence was found to be gelsolin concentration dependent. Electron microscopy of samples taken shortly after dilution into GCa2 showed a marked reduction in filament length consistent with filament severing and an increase in the number of ends. Conversely, occupancy of the EGTA-stable actin-binding site by an actin monomer eliminated the severing activity. Dilution of F-actin into the gelsolin-actin complex, either as GA1Ca1 or GA1Ca2, resulted in a decrease in the rate of depolymerization that was consistent with filament end capping. This result indicates that the EGTA-stable binding site is required and must be unoccupied for filament severing to occur. The effectiveness of gelsolin, GCa2, in causing filament depolymerization was dependent upon the ionic conditions: in KCI, actin filaments appeared to be more stable and less susceptible to gelsolin, whereas in Mg2+, actin filaments were more easily fragmented. Finally, a comparison of the number of kinetically active ends generated when filaments were diluted into gelsolin versus the number formed when gelsolin can function as a nucleation site suggests that gelsolin may sever more than once. The data are consistent with a mechanism where gelsolin, with both actin-binding sites unoccupied, can sever but not cap F-actin. Occupancy of the EGTA-stable binding site yields a gelsolin-actin complex that can no longer sever filaments, but can cap filament ends.     

Effect of the structure of the N terminus of tropomyosin on tropomodulin function

Tropomodulins (Tmod) bind to the N terminus of tropomyosin and cap the pointed end of actin filaments. Tropomyosin alone also inhibits the rate of actin depolymerization at the pointed end of filaments. Here we have defined 1) the structural requirements of the N terminus of tropomyosin important for regulating the pointed end alone and with erythrocyte Tmod (Tmod1), and 2) the Tmod1 subdomains required for binding to tropomyosin and for regulating the pointed end. Changes in pyrene-actin fluorescence during polymerization and depolymerization were measured with actin filaments blocked at the barbed end with gelsolin. Three tropomyosin isoforms differently influence pointed end dynamics. Recombinant TM5a, a short non-muscle alpha-tropomyosin, inhibited depolymerization. Recombinant (unacetylated) TM2 and N-acetylated striated muscle TM (stTM), long alpha-tropomyosin isoforms with the same N-terminal sequence, different from TM5a, also inhibited depolymerization but were less effective than TM5a. All blocked the pointed end with Tmod1 in the order of effectiveness TM5a >stTM >TM2, showing the importance of the N-terminal sequence and modification. Tmod1-(1-344), lacking the C-terminal 15 residues, did not nucleate polymerization but blocked the pointed end with all three tropomyosin isoforms as does a shorter fragment, Tmod1-(1-92), lacking the C-terminal "capping" domain though higher concentrations were required. An even shorter fragment, Tmod1-(1-48), bound tropomyosin but did not influence actin filament elongation. Tropomyosin-Tmod may function to locally regulate cytoskeletal dynamics in cells by stabilizing actin filaments.     

Irradiations of rabbit myofibrils with an ultraviolet microbeam. II. Phalloidin protects actin in solution but not in myofibrils from depolymerization by ultraviolet light

We tested whether phalloidin protects actin in myofibrils from depolymerization by ultraviolet light (UV). I bands in glycerinated rabbit psoas myofibrils were irradiated with a UV microbeam in the presence and absence of phalloidin. We used the retention of contractility of the irradiated I band as the assay for protection of actin by phalloidin, since previous experiments indicated that UV blocks contraction of an irradiated I band by depolymerizing the thin filaments. The I bands of myofibrils incubated in phalloidin were as sensitive to UV as control I bands, indicating that phalloidin did not protect the thin filaments. However, phalloidin did protect F-actin in solution from depolymerization by UV. This apparent contradiction between F-actin in myofibrils and F-actin in solution was resolved by observing unirradiated myofibrils that were stained with rhodamine-phalloidin. It was found that phalloidin does not bind uniformly to the thin filaments, though as the fluorescence image is observed over time the staining pattern changes until it does appear to bind uniformly. We conclude that phalloidin does not protect F-actin in myofibrils from depolymerization by UV because it does not bind uniformly to the filaments.     

Rate of treadmilling of actin filaments in vitro

Actin filaments capped at the barbed ends were formed by polymerizing monomeric actin onto a gelsolin-actin complex. The rate of depolymerization and polymerization of the pointed ends was determined by diluting gelsolin-capped actin filaments into various concentrations of monomeric actin. Under the conditions of the experiments (100 mM-KCl, 2 mM-MgCl2 at 37 degrees C) the rate constant of dissociation of subunits both from a shortening and a lengthening filament was found to be 0.21 s-1. As the rate of dissociation of subunits from the slow pointed end determines the rate of treadmilling, it is concluded that actin filaments treadmill with a rate of about 2 micron/h.     

Multiple forms of Spire-actin complexes and their functional consequences

Spire is a WH2 domain-containing actin nucleator essential for establishing an actin mesh during oogenesis. In vitro, in addition to nucleating filaments, Spire can sever them and sequester actin monomers. Understanding how Spire is capable of these disparate functions and which are physiologically relevant is an important goal. To study severing, we examined the effect of Drosophila Spire on preformed filaments in bulk and single filament assays. We observed rapid depolymerization of actin filaments by Spire, which we conclude is largely due to its sequestration activity and enhanced by its weak severing activity. We also studied the solution and crystal structures of Spire-actin complexes. We find structural and functional differences between constructs containing four WH2 domains (Spir-ABCD) and two WH2 domains (Spir-CD) that may provide insight into the mechanisms of nucleation and sequestration. Intriguingly, we observed lateral interactions between actin monomers associated with Spir-ABCD, suggesting that the structures built by these four tandem WH2 domains are more complex than originally imagined. Finally, we propose that Spire-actin mixtures contain both nuclei and sequestration structures.     

Calcium binds cooperatively to the regulatory sites of the cardiac thin filament

To investigate the relationship between thin filament Ca2+ binding and activation of the MgATPase rate of myosin subfragment 1, native cardiac thin filaments were isolated and characterized. Direct measurements of 45Ca binding to the thin filament were consistent with non-cooperative binding to two high affinity sites (Ka 7.3 +/- 0.8 x 10(6) M-1) and either cooperative or non-cooperative binding to one low affinity site (Ka 4 +/- 2 x 10(5) M-1) per troponin at 25 degrees C, 30 mM ionic strength, pH 7.06. Addition of a low concentration of myosin subfragment 1 to the native thin filaments produced a Ca2+-regulated MgATPase activity with Kapp (2.5 +/- 1.3 x 10(5) M-1), matching the low affinity Ca2+ site. The MgATPase rate was cooperatively activated by Ca2+ (Hill coefficient 1.8). To determine whether Ca2+ binding to the low affinity sites was cooperative, native thin filament troponin was exchanged with troponin labeled on troponin C with 2-(4'-iodoacetamidanilo)naphthalene-6-sulfonic acid. From the Ca2+-sensitive fluorescence of this complex, Ca2+ binding was cooperative with a Hill coefficient of 1.7-2.0. Using the troponin-exchanged thin filaments, myosin subfragment 1 MgATPase rate activation was also cooperative and closely proportional to Ca2+ thin filament binding. Reconstitution of the thin filament from its components raised the Ca2+ affinity by a factor of 2 (compared with native thin filaments) and incorporation of fluorescently modified troponin raised the Ca2+ affinity by another factor of 2. Stoichiometrically reconstituted thin filaments produced non-cooperative MgATPase rate activation, contrasting with cooperative activation with native thin filaments, troponin-exchanged thin filaments and thin filaments reconstituted with a stoichiometric excess of troponin. The Ca2+-induced fluorescence transition of stoichiometrically reconstituted thin filaments was non-cooperative. These results suggest that Ca2+ binds cooperatively to the regulatory sites of the cardiac thin filament, even in the absence of myosin, and even though cardiac troponin C has only one Ca2+-specific binding site. A theoretical model for these observations is described and related to the experimental data. Well-known interactions between neighboring troponin-tropomyosin complexes are the proposed source of cooperativity and also influence the overall Ka. The data indicate that Ca2+ is four times more likely to elongate a sequence of troponin-tropomyosin units already binding Ca2+ than to bind to a site interior to a sequence of units without Ca2+.     

Kinetics of actin depolymerization: influence of ions, temperature, age of F-actin, cytochalasin B and phalloidin

Actin, labelled with the fluorescent dye N-(3-pyrenyl)maleimide, was diluted below its critical concentration and depolymerization was followed by measuring the declining fluorescence intensity. The time courses of depolymerization were fitted to a sum of three exponentials. In most cases there was a fast initial phase followed by one or three slower ones. Increasing MgCl2 concentration slowed down depolymerization velocity, as did substitution of Tris-maleate buffer by phosphate buffer. Older F-actin preparations depolymerized more slowly than younger ones. Phalloidin strongly decreased depolymerization velocity even after sonication. In the presence of cytochalasin B depolymerization was more uniformly exponential than in the absence of cytochalasin B; overall depolymerization velocity was decreased by cytochalasin B. The results are discussed on the assumption that depolymerization kinetics reflect the length distribution of actin filaments during depolymerization.