The thermostability of DNA-binding protein HU from mesophilic, thermophilic, and extreme thermophilic bacteria

Based on primary structure comparison between four highly homologous DNA-binding proteins (HUs) displaying differential thermostability, we have employed in vitro site-directed mutagenesis to decipher their thermostability mechanism at the molecular level. The contribution of the 11 amino acids that differ between the thermophilic HUBst from Bacillus stearothermophilus (Tm = 61.6 degrees C) and the mesophilic HUBsu from Bacillus subtilis (Tm = 39.7 degrees C) was evaluated by replacing these amino acids in HUBst with their mesophilic counterparts. Among 11 amino acids, three residues, Gly-15, Glu-34, and Val-42, which are highly conserved in the thermophilic HUs, have been found to be responsible for the thermostability of HUBst. These amino acids in combination (HUBst-G15E/E34D/V42I) reduce the thermostability of the protein (Tm = 45.1 degrees C) at the level of its mesophilic homologue HUBsu. By replacing these amino acids in HUBsu with their thermophilic counterparts, the HUBsu-E15G/D34E/142V mutant was generated with thermostability (Tm = 57.8 degrees C) at the level of thermophilic HUBst. Employing the same strategy, we generated several mutants in the extremely thermophilic HUTmar from Thermotoga maritima (Tm = 80.5 degrees C), and obtained data consistent with the previous results. The triplet mutant HUTmar-G15E/E34D/V421 (Tm = 35.9 degrees C) converted the extremely thermophilic protein HUTmar to mesophilic. The various forms of HU proteins were overproduced in Escherichia coli, highly purified, and the thermostability of the mutants confirmed by circular dichroism spectroscopy. The results presented here were elucidated on the basis of the X-ray structure of HUBst and HUTmar (our unpublished results), and their mechanism was proposed at the molecular level. The results clearly show that three individual local interactions located at the helix-turn-helix part of the protein are responsible for the stability of HU proteins by acting cooperatively in a common mechanism for thermostability.     

Solution structure and thermal stability of ribosomal protein L30e from hyperthermophilic archaeon Thermococcus celer

To understand the structural basis of thermostability, we have determined the solution structure of a thermophilic ribosomal protein L30e from Thermococcus celer by NMR spectroscopy. The conformational stability of T. celer L30e was measured by guanidine and thermal-induced denaturation, and compared with that obtained for yeast L30e, a mesophilic homolog. The melting temperature of T. celer L30e was 94 degrees C, whereas the yeast protein denatured irreversibly at temperatures >45 degrees C. The two homologous proteins also differ greatly in their stability at 25 degrees C: the free energy of unfolding was 45 kJ/mole for T. celer L30e and 14 kJ/mole for the yeast homolog. The solution structure of T. celer L30e was compared with that of the yeast homolog. Although the two homologous proteins do not differ significantly in their number of hydrogen bonds and the amount of solvent accessible surface area buried with folding, the thermophilic T. celer L30e was found to have more long-range ion pairs, more proline residues in loops, and better helix capping residues in helix-1 and helix-4. A K9A variant of T. celer L30e was created by site-directed mutagenesis to examine the role of electrostatic interactions on protein stability. Although the melting temperatures of the K9A variant is approximately 8 degrees C lower than that of the wild-type L30e, their difference in T(m) is narrowed to approximately 4.2 degrees C at 0.5 M NaCl. This salt-dependency of melting temperatures strongly suggests that electrostatic interactions contribute to the thermostability of T. celer L30e.     

Two exposed amino acid residues confer thermostability on a cold shock protein

Thermophilic organisms produce proteins of exceptional stability. To understand protein thermostability at the molecular level we studied a pair of cold shock proteins, one of mesophilic and one of thermophilic origin, by systematic mutagenesis. Although the two proteins differ in sequence at 12 positions, two surface-exposed residues are responsible for the increase in stability of the thermophilic protein (by 15.8 kJ mol-1 at 70 degrees C). 11.5 kJ mol-1 originate from a predominantly electrostatic contribution of Arg 3 and 5.2 kJ mol-1 from hydrophobic interactions of Leu 66 at the carboxy terminus. The mesophilic protein could be converted to a highly thermostable form by changing the Glu residues at positions 3 and 66 to Arg and Leu, respectively. The variation of surface residues may thus provide a simple and powerful approach for increasing the thermostability of a protein.     

The DNA-binding protein HU from mesophilic and thermophilic bacilli: gene cloning, overproduction and purification.

The major histone-like bacterial protein (HU)-encoding genes (hup) from five different Bacilli have been cloned, sequenced and overexpressed in Escherichia coli. The five Bacilli selected are closely related, but have different optimum growth temperatures: greater than 70 degrees C for Bacillus caldolyticus and B. caldotenax; 60-65 degrees C for B. stearothermophilus (Bst); 37 degrees C for B. subtilis and 30 degrees C for B. globigii. The deduced amino acid (aa) sequences from the three thermophiles are identical. Those from the two mesophiles are also identical and differ from those of the thermophiles at eleven aa positions. The mesophilic proteins have an extra two aa at the C terminus. Cells harbouring plasmids containing the hup genes can produce HU. An efficient purification scheme using cation-exchange chromatography and fast protein liquid chromatography is presented. This gives approx. 30-40 mg of more than 95% pure Bst HU per litre of E. coli culture.     

Electrostatic interactions contribute to reduced heat capacity change of unfolding in a thermophilic ribosomal protein l30e

The origin of reduced heat capacity change of unfolding (DeltaC(p)) commonly observed in thermophilic proteins is controversial. The established theory that DeltaC(p) is correlated with change of solvent-accessible surface area cannot account for the large differences in DeltaC(p) observed for thermophilic and mesophilic homologous proteins, which are very similar in structures. We have determined the protein stability curves, which describe the temperature dependency of the free energy change of unfolding, for a thermophilic ribosomal protein L30e from Thermococcus celer, and its mesophilic homologue from yeast. Values of DeltaC(p), obtained by fitting the free energy change of unfolding to the Gibbs-Helmholtz equation, were 5.3 kJ mol(-1) K(-1) and 10.5 kJ mol(-1) K(-1) for T.celer and yeast L30e, respectively. We have created six charge-to-neutral mutants of T.celer L30e. Removal of charges at Glu6, Lys9, and Arg92 decreased the melting temperatures of T.celer L30e by approximately 3-9 degrees C, and the differences in melting temperatures were smaller with increasing concentration of salt. These results suggest that these mutations destabilize T.celer L30e by disrupting favorable electrostatic interactions. To determine whether electrostatic interactions contribute to the reduced DeltaC(p) of the thermophilic protein, we have determined DeltaC(p) for wild-type and mutant T.celer L30e by Gibbs-Helmholtz and by van't Hoff analyses. A concomitant increase in DeltaC(p) was observed for those charge-to-neutral mutants that destabilize T.celer L30e by removing favorable electrostatic interactions. The crystal structures of K9A, E90A, and R92A, were determined, and no structural change was observed. Taken together, our results support the conclusion that electrostatic interactions contribute to the reduced DeltaC(p) of T.celer L30e.     

Solution structure and backbone dynamics of the K18G/R82E Alicyclobacillus acidocaldarius thioredoxin mutant: a molecular analysis of its reduced thermal stability

No general strategy for thermostability has been yet established, because the extra stability of thermophiles appears to be the sum of different cumulative stabilizing interactions. In addition, the increase of conformational rigidity observed in many thermophilic proteins, which in some cases disappears when mesophilic and thermophilic proteins are compared at their respective physiological temperatures, suggests that evolutionary adaptation tends to maintain corresponding states with respect to conformational flexibility. In this study, we accomplished a structural analysis of the K18G/R82E Alicyclobacillus acidocaldarius thioredoxin (BacTrx) mutant, which has reduced heat resistance with respect to the thermostable wild-type. Furthermore, we have also achieved a detailed study, carried out at 25, 45, and 65 degrees C, of the backbone dynamics of both the BacTrx and its K18G/R82E mutant. Our findings clearly indicate that the insertion of the two mutations causes a loss of energetically favorable long-range interactions and renders the secondary structure elements of the double mutants more similar to those of the mesophilic Escherichia coli thioredoxin. Moreover, protein dynamics analysis shows that at room temperature the BacTrx, as well as the double mutant, are globally as rigid as the mesophilic thioredoxins; differently, at 65 degrees C, which is in the optimal growth temperature range of A. acidocaldarius, the wild-type retains its rigidity while the double mutant is characterized by a large increase of the amplitude of the internal motions. Finally, our research interestingly shows that fast motions on the pico- to nanosecond time scale are not detrimental to protein stability and provide an entropic stabilization of the native state. This study further confirms that protein thermostability is reached through diverse stabilizing interactions, which have the key role to maintain the structural folding stable and functional at the working temperature.     

Engineering a selectable marker for hyperthermophiles

Limited thermostability of antibiotic resistance markers has restricted genetic research in the field of extremely thermophilic Archaea and bacteria. In this study, we used directed evolution and selection in the thermophilic bacterium Thermus thermophilus HB27 to find thermostable variants of a bleomycin-binding protein from the mesophilic bacterium Streptoalloteichus hindustanus. In a single selection round, we identified eight clones bearing five types of double mutated genes that provided T. thermophilus transformants with bleomycin resistance at 77 degrees C, while the wild-type gene could only do so up to 65 degrees C. Only six different amino acid positions were altered, three of which were glycine residues. All variant proteins were produced in Escherichia coli and analyzed biochemically for thermal stability and functionality at high temperature. A synthetic mutant resistance gene with low GC content was designed that combined four substitutions. The encoded protein showed up to 17 degrees C increased thermostability and unfolded at 85 degrees C in the absence of bleomycin, whereas in its presence the protein unfolded at 100 degrees C. Despite these highly thermophilic properties, this mutant was still able to function normally at mesophilic temperatures in vivo. The mutant protein was co-crystallized with bleomycin, and the structure of the binary complex was determined to a resolution of 1.5 A. Detailed structural analysis revealed possible molecular mechanisms of thermostabilization and enhanced antibiotic binding, which included the introduction of an intersubunit hydrogen bond network, improved hydrophobic packing of surface indentations, reduction of loop flexibility, and alpha-helix stabilization. The potential applicability of the thermostable selection marker is discussed.     

HU histone-like DNA-binding protein from <Emphasis Type="Italic">Thermus thermophilus</Emphasis>: structural and evolutionary analyses

The histone-like DNA-binding proteins (HU) serve as model molecules for protein thermostability studies, as they function in different bacteria that grow in a wide range of temperatures and show sequence diversity under a common fold. In this work, we report the cloning of the hutth gene from Thermus thermophilus, the purification and crystallization of the recombinant HUTth protein, as well as its X-ray structure determination at 1.7 Å. Detailed structural and thermodynamic analyses were performed towards the understanding of the thermostability mechanism. The interaction of HUTth protein with plasmid DNA in solution has been determined for the first time with MST. Sequence conservation of an exclusively thermophilic order like Thermales, when compared to a predominantly mesophilic order (Deinococcales), should be subject, to some extent, to thermostability-related evolutionary pressure. This hypothesis was used to guide our bioinformatics and evolutionary studies. We discuss the impact of thermostability adaptation on the structure of HU proteins, based on the detailed evolutionary analysis of the Deinococcus–Thermus phylum, where HUTth belongs. Furthermore, we propose a novel method of engineering thermostable proteins, by combining consensus-based design with ancestral sequence reconstruction. Finally, through the structure of HUTth, we are able to examine the validity of these predictions. Our approach represents a significant advancement, as it explores for the first time the potential of ancestral sequence reconstruction in the divergence between a thermophilic and a mainly mesophilic taxon, combined with consensus-based engineering.     

Distinct metal dependence for catalytic and structural functions in the L-arabinose isomerases from the mesophilic Bacillus halodurans and the thermophilic Geobacillus stearothermophilus

L-Arabinose isomerase (AI) catalyzes the isomerization of L-arabinose to L-ribulose. It can also convert d-galactose to d-tagatose at elevated temperatures in the presence of divalent metal ions. The araA genes, encoding AI, from the mesophilic bacterium Bacillus halodurans and the thermophilic Geobacillus stearothermophilus were cloned and overexpressed in Escherichia coli, and the recombinant enzymes were purified to homogeneity. The purified enzymes are homotetramers with a molecular mass of 232 kDa and close amino acid sequence identity (67%). However, they exhibit quite different temperature dependence and metal requirements. B. halodurans AI has maximal activity at 50 degrees C under the assay conditions used and is not dependent on divalent metal ions. Its apparent K(m) values are 36 mM for L-arabinose and 167 mM for d-galactose, and the catalytic efficiencies (k(cat)/K(m)) of the enzyme were 51.4 mM(-1)min(-1) (L-arabinose) and 0.4 mM(-1)min(-1) (d-galactose). Unlike B. halodurans AI, G. stearothermophilus AI has maximal activity at 65-70 degrees C, and is strongly activated by Mn(2+). It also has a much higher catalytic efficiency of 4.3 mM(-1)min(-1) for d-galactose and 32.5 mM(-1)min(-1)for L-arabinose, with apparent K(m) values of 117 and 63 mM, respectively. Irreversible thermal denaturation experiments using circular dichroism (CD) spectroscopy showed that the apparent melting temperature of B. halodurans AI (T(m)=65-67 degrees C) was unaffected by the presence of metal ions, whereas EDTA-treated G. stearothermophilus AI had a lower T(m) (72 degrees C) than the holoenzyme (78 degrees C). CD studies of both enzymes demonstrated that metal-mediated significant conformational changes were found in holo G. stearothermophilus AI, and there is an active tertiary structure for G. stearothermophilus AI at elevated temperatures for its catalytic activity. This is in marked contrast to the mesophilic B. halodurans AI where cofactor coordination is not necessary for proper protein folding. The metal dependence of G. stearothermophilus AI seems to be correlated with their catalytic and structural functions. We therefore propose that the metal ion requirement of the thermophilic G. stearothermophilus AI reflects the need to adopt the correct substrate-binding conformation and the structural stability at elevated temperatures.     

Gly or Ala substitutions for Pro(210)Thr(211)Asn(212) at the β8-β9 turn of subtilisin Carlsberg increase the catalytic rate and decrease thermostability

A comparison of the primary structures among psychrophilic, mesophilic, and thermophilic subtilases revealed that the turn between the β8 and β9 strands (β8-β9 turn, BPN' numbering) of psychrophilic subtilases are more flexible than those of their mesophilic and thermophilic counterparts. To investigate the relationship between structure of this turn and enzyme activity as well as thermostability of mesophilic subtilisin Carlsberg (sC), we analyzed 6 mutants of sC with a single, double, or triple Gly or Ala substitutions for Pro(210)Thr(211)Asn(212) at the β8-β9 turn. Among the single Gly substitutions, the P210G substitution most significantly (1.5-fold) increased the specific activity on N-succinyl-Ala-Ala-Pro-Phe-p-nitroanilide (AAPF) substrate and 12-fold decreased the thermostability. All mutants tested showed the increased k(cat) for the AAPF substrate and reduced thermostability compared with the wild-type sC. The k(cat) values of the P210G, P210G/T211G, and P210G/T211G/N212G mutants were 1.5-, 1.7-, and 1.8-fold higher than that of the wild-type sC. There were significant positive correlations between k(cat) and thermal inactivation rates as well as k(cat) and K(m) of the wild-type and mutants. These results demonstrate that the structure of β8-β9 turn, despite its distance from the active site, has significant effects on the catalytic rate and thermostability of sC through a global network of intramolecular interactions and suggest that the lack of flexibility of this turn stabilizes the wild-type sC against thermal inactivation in compensation for some loss of catalytic activity.     

Effects of a novel disulfide bond and engineered electrostatic interactions on the thermostability of azurin

Identification and evaluation of factors important for thermostability in proteins is a growing research field with many industrial applications. This study investigates the effects of introducing a novel disulfide bond and engineered electrostatic interactions with respect to the thermostability of holo azurin from Pseudomonas aeruginosa. Four mutants were selected on the basis of rational design and novel temperature-dependent atomic displacement factors from crystal data collected at elevated temperatures. The atomic displacement parameters describe the molecular movement at higher temperatures. The thermostability was evaluated by optical spectroscopy as well as by differential scanning calorimetry. Although azurin has a high inherent stability, the introduction of a novel disulfide bond connecting a flexible loop with small alpha-helix (D62C/K74C copper-containing mutant), increased the T(m) by 3.7 degrees C compared with the holo protein. Furthermore, three mutants were designed to introduce electrostatic interactions, K24R, D23E/K128R, and D23E/K128R/K24R. Mutant K24R stabilizes loops between two separate beta-strands and D23E/K128R was selected to stabilize the C-terminus of azurin. Furthermore, D23E/K128R/K24R was selected to reflect the combination of the electrostatic interactions in D23E/K128R and K24R. The mutants involving electrostatic interactions had a minor effect on the thermostability. The crystal structures of the copper-containing mutants D62C/K74C and K24R have been determined to 1.5 and 1.8 A resolution. In addition the crystal structure of the zinc-loaded mutant D62C/K74C has also been completed to 1.8 A resolution. These structures support the selected design and provide valuable information for evaluating effects of the modifications on the thermostability of holo azurin.     

Different packing of external residues can explain differences in the thermostability of proteins from thermophilic and mesophilic organisms

MOTIVATION: Understanding the basis of protein stability in thermophilic organisms raises a general question: what structural properties of proteins are responsible for the higher thermostability of proteins from thermophilic organisms compared to proteins from mesophilic organisms? RESULTS: A unique database of 373 structurally well-aligned protein pairs from thermophilic and mesophilic organisms is constructed. Comparison of proteins from thermophilic and mesophilic organisms has shown that the external, water-accessible residues of the first group are more closely packed than those of the second. Packing of interior parts of proteins (residues inaccessible to water molecules) is the same in both cases. The analysis of amino acid composition of external residues of proteins from thermophilic organisms revealed an increased fraction of such amino acids as Lys, Arg and Glu, and a decreased fraction of Ala, Asp, Asn, Gln, Thr, Ser and His. Our theoretical investigation of folding/unfolding behavior confirms the experimental observations that the interactions that differ in thermophilic and mesophilic proteins form only after the passing of the transition state during folding. Thus, different packing of external residues can explain differences in thermostability of proteins from thermophilic and mesophilic organisms. AVAILABILITY: The database of 373 structurally well-aligned protein pairs is available at http://phys.protres.ru/resources/termo_meso_base.html. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.     

Exploiting the Link between Protein Rigidity and Thermostability for Data‐Driven Protein Engineering

Understanding and exploiting the relationship between microscopic structure and macroscopic stability is important for developing strategies to improve protein stability at high temperatures. The thermostability of proteins has been repeatedly linked to an enhanced structural rigidity of the folded native state. In the current study, the rigidity of protein structures from mesophilic and thermophilic organisms along a thermal unfolding trajectory is directly probed. In order to perform this, protein structures were modeled as constraint networks, and the rigidity in these networks was quantified using the Floppy Inclusion and Rigid Substructure Topography (FIRST) method. During the thermal unfolding, a phase transition was observed that defines the rigidity percolation threshold and corresponds to the folded‐unfolded transition in protein folding. Using concepts from percolation theory and network science, a higher phase transition temperature was observed for ca. two‐thirds of the proteins from thermophilic organisms compared to their mesophilic counterparts, when applied to a data set of 20 pairs of homologues. From both the analysis of the microstructure of the constraint networks and monitoring the macroscopic behavior during the thermal unfolding, direct evidence was found for the “corresponding states” concept, which states that mesophilic and thermophilic enzymes are in corresponding states of similar flexibility at their respective optimal temperature. Finally, the current approach facilitated the identification of structural features from which a destabilization of the structure originates upon thermal unfolding. These predictions show a good agreement with the experimental data. Therefore, the information might be exploited in data‐driven protein engineering by pointing to residues that should be varied to obtain a protein with higher thermostability.     

Structure of phenylalanine hydroxylase from Colwellia psychrerythraea 34H, a monomeric cold active enzyme with local flexibility around the active site and high overall stability

The characteristic of cold-adapted enzymes, high catalytic efficiency at low temperatures, is often associated with low thermostability and high flexibility. In this context, we analyzed the catalytic properties and solved the crystal structure of phenylalanine hydroxylase from the psychrophilic bacterium Colwellia psychrerythraea 34H (CpPAH). CpPAH displays highest activity with tetrahydrobiopterin (BH(4)) as cofactor and at 25 degrees C (15 degrees C above the optimal growth temperature). Although the enzyme is monomeric with a single L-Phe-binding site, the substrate binds cooperatively. In comparison with PAH from mesophilic bacteria and mammalian organisms, CpPAH shows elevated [S(0.5)](L-Phe) (= 1.1 +/- 0.1 mm) and K(m)(BH(4))(= 0.3 +/- 0.1 mm), as well as high catalytic efficiency at 10 degrees C. However, the half-inactivation and denaturation temperature is only slightly lowered (T(m) approximately 52 degrees C; where T(m) is half-denaturation temperature), in contrast to other cold-adapted enzymes. The crystal structure shows regions of local flexibility close to the highly solvent accessible binding sites for BH(4) (Gly(87)/Phe(88)/Gly(89)) and l-Phe (Tyr(114)-Pro(118)). Normal mode and COREX analysis also detect these and other areas with high flexibility. Greater mobility around the active site and disrupted hydrogen bonding abilities for the cofactor appear to represent cold-adaptive properties that do not markedly affect the thermostability of CpPAH.     

Increasing the thermal stability of cellulase C using rules learned from thermophilic proteins: a pilot study

Some structural features underlying the increased thermostability of enzymes from thermophilic organisms relative to their homologues from mesophiles are known from earlier studies. We used cellulase C from Clostridium thermocellum to test whether thermostability can be increased by mutations designed using rules learned from thermophilic proteins. Cellulase C has a TIM barrel fold with an additional helical subdomain. We designed and produced a number of mutants with the aim to increase its thermostability. Five mutants were designed to create new electrostatic interactions. They all retained catalytic activity but exhibited decreased thermostability relative to the wild-type enzyme. Here, the stabilizing contributions are obviously smaller than the destabilization caused by the introduction of the new side chains. In another mutant, the small helical subdomain was deleted. This mutant lost activity but its melting point was only 3 degrees C lower than that of the wild-type enzyme, which suggests that the subdomain is an independent folding unit and is important for catalytic function. A double mutant was designed to introduce a new disulfide bridge into the enzyme. This mutant is active and has an increased stability (deltaT(m)=3 degrees C, delta(deltaG(u))=1.73 kcal/mol) relative to the wild-type enzyme. Reduction of the disulfide bridge results in destabilization and an altered thermal denaturation behavior. We conclude that rules learned from thermophilic proteins cannot be used in a straightforward way to increase the thermostability of a protein. Creating a crosslink such as a disulfide bond is a relatively sure-fire method but the stabilization may be smaller than calculated due to coupled destabilizing effects.     

Transproteomic evidence of a loop-deletion mechanism for enhancing protein thermostability.

Understanding the molecular determinants of protein thermostability is of theoretical and practical importance. While numerous determinants have been suggested, no molecular feature has been judged of paramount importance, with the possible exception of ion-pair networks. The difficulty in identifying the main determinants may have been the limited structural information available on the thermostable proteins. Recently the complete genomes for mesophilic, thermophilic and hyperthermophilic organisms have been sequenced, vastly improving the potential for uncovering general trends in sequence and structure evolution related to thermostability and, thus, for isolating the more important determinants. From a comparative analysis of 20 complete genomes, we find a trend towards shortened thermophilic proteins relative to their mesophilic homologs. Moreover, sequence alignments to proteins of known structure indicate that thermophilic sequences are more likely than their mesophilic homologs to have deletions in exposed loop regions. The new genomes offer enough comparable sequences to compute meaningful statistics that point to loop deletion as a general evolutionary strategy for increasing thermostability.     

Study on mesophilic and thermophilic alcohol dehydrogenases in gas-phase reaction

The initial reaction rate and the thermostability of the mesophilic alcohol dehydrogenase (ADH) from Lactobacillus brevis (LBADH), and the thermophilic ADH from Thermoanaerobacter sp. (ADH T) in gas-phase reaction were compared. The effects of water activity, cofactor-to-protein molar ratio, and reaction temperature on the reduction of acetophenone to 1-phenylethanol were studied. An optimal water activity of 0.55 in terms of productivity was found for both ADHs. The cofactor-to-protein molar ratio was chosen slightly higher than equimolar to increase both activity and thermostability. An excellent optimal productivity of 1,000 g x L(-1) x d(-1) for LBADH and 600 g x L(-1) x d(-1)for ADH T was found at 60 degrees C, while the highest total turnover numbers with respect to the enzyme were achieved at 30 degrees C and amounted to 4.2 million for LBADH and 1.7 million for ADH T, respectively. Interestingly, the ADH from the mesophilic L. brevisshowed the higher thermostability in the nonconventional medium gas phase.     

A novel octameric AMP-forming acetyl-CoA synthetase from the hyperthermophilic crenarchaeon Pyrobaculum aerophilum

AMP-forming acetyl-CoA synthetases (ACSs) are ubiquitous in all three domains of life. Here, we report the first characterization of an ACS from a hyperthermophilic organism, from the archaeon Pyrobaculum aerophilum. The recombinant ACS, the gene product of ORF PAE2867, showed extremely high thermostability and thermoactivity at temperatures around 100 degrees C. In contrast to known monomeric or homodimeric mesophilic ACSs, the P. aerophilum ACS was a 610 kDa homooctameric protein, with a significant lower content of thermolabile (Cys, Asn, and Gln) and higher content of charged (Glu, Lys, and Arg) amino acids. Kinetic analyses revealed an unusual broad substrate spectrum for organic acids and an extremely high affinity for acetate (K(m) 3 microM).     

A single proline substitution is critical for the thermostabilization of Clostridium beijerinckii alcohol dehydrogenase

Analysis of the three-dimensional structures of three closely related mesophilic, thermophilic, and hyperthermophilic alcohol dehydrogenases (ADHs) from the respective microorganisms Clostridium beijerinckii (CbADH), Entamoeba histolytica (EhADH1), and Thermoanaerobacter brockii (TbADH) suggested that a unique, strategically located proline residue (Pro100) might be crucial for maintaining the thermal stability of EhADH1. To determine whether proline substitution at this position in TbADH and CbADH would affect thermal stability, we used site-directed mutagenesis to replace the complementary residues in both enzymes with proline. The results showed that replacing Gln100 with proline significantly enhanced the thermal stability of the mesophilic ADH: DeltaT(1/2) (60 min) = + 8 degrees C (temperature of 50% inactivation after incubation for 60 min), DeltaT(1/2) (CD) = +11.5 degrees C (temperature at which 50% of the original CD signal at 218 nm is lost upon heating between 30 degrees and 98 degrees C). A His100 --> Pro substitution in the thermophilic TbADH had no effect on its thermostability. An analysis of the three-dimensional structure of the crystallized thermostable mutant Q100P-CbADH suggested that the proline residue at position 100 stabilized the enzyme by reinforcing hydrophobic interactions and by reducing the flexibility of a loop at this strategic region.     

Thermostability of multidomain proteins: elongation factors EF-Tu from Escherichia coli and Bacillus stearothermophilus and their chimeric forms

Recombinant mesophilic Escherichia coli (Ec) and thermophilic Bacillus stearothermophilus (Bst) elongation factors EF-Tus, their isolated G-domains, and six chimeric EF-Tus composed of domains of either EF-Tu were prepared, and their GDP/GTP binding activities and thermostability were characterized. BstEF-Tu and BstG-domain bound GDP and GTP with affinities in nanomolar and submicromolar ranges, respectively, fully comparable with those of EcEF-Tu. In contrast, the EcG-domain bound the nucleotides with much lower, micromolar affinities. The exchange of domains 2 and 3 had essentially no effect on the GDP-binding activity; all complexes of chimeric EF-Tus with GDP retained K(d) values in the nanomolar range. The final thermostability level of either EF-Tu was the result of a cooperative interaction between the G-domains and domains 2 + 3. The G-domains set up a "basic" level of the thermostability, which was approximately 20 degrees C higher with the BstG-domain than with the EcG-domain. This correlated with the growth temperature optimum difference of both bacteria and two distinct thermostabilization features of the BstG-domain: an increase of charged residues at the expense of polar uncharged residues (CvP bias), and a decrease in the nonpolar solvent-accessible surface area. Domains 2 + 3 contributed by further stabilization of alpha-helical regions and, in turn, the functions of the G-domains to the level of the respective growth temperature optima. Their contributions were similar irrespective of their origin but, with Ecdomains 2 + 3, dependent on the guanine nucleotide binding state. It was lower in the GTP conformation, and the mechanism involved the destabilization of the alpha-helical regions of the G-domain by Ecdomain 2.