Biosorption of copper(II) and cobalt(II) from aqueous solutions by crab shell particles

Biosorption of each of the heavy metals, copper(II) and cobalt(II) by crab shell was investigated in this study. The biosorption capacities of crab shell for copper and cobalt were studied at different particle sizes (0.456-1.117 mm), biosorbent dosages (1-10 g/l), initial metal concentrations (500-2000 mg/l) and solution pH values (3.5-6) in batch mode. At optimum particle size (0.767 mm), biosorbent dosage (5 g/l) and initial solution pH (pH 6); crab shell recorded maximum copper and cobalt uptakes of 243.9 and 322.6 mg/g, respectively, according to Langmuir model. The kinetic data obtained at different initial metal concentrations indicated that biosorption rate was fast and most of the process was completed within 2h, followed by slow attainment of equilibrium. Pseudo-second order model fitted the data well with very high correlation coefficients (>0.998). The presence of light and heavy metal ions influenced the copper and cobalt uptake potential of crab shell. Among several eluting agents, EDTA (pH 3.5, in HCl) performed well and also caused low biosorbent damage. The biosorbent was successfully regenerated and reused for five cycles.     

Removal of copper ions by the filamentous fungus, Rhizopus oryzae from aqueous solution

Removal of heavy metals present in wastewaters has been a major concern due to their non-biodegradability and toxicity. Removal of copper ion using NaOH treated Rhizopus oryzae biomass was investigated in a batch reactor. The copper uptake exhibited substantial enhancement both in terms of kinetics of uptake as well as the loading capacity. The copper biosorption by viable and pretreated fungal biomass fit well to a Lagergren's pseudo second order reaction in comparison to pseudo first order kinetics. Investigation on effect of pH indicated improved performance in the range of pH 4-6 in alkali treated biomass. Copper uptake exhibited by viable biomass was highest at 21 degrees C, unlike pretreated biomass that showed maximum uptake across the range of temperature 21-55 degrees C. The maximum copper loading capacity of the viable and pretreated biomass according to Langmuir isotherm was 19.4 and 43.7 mg/g, respectively. Distribution coefficient of pretreated biomass showed improvement at lower residual concentration, indicating a change in the nature of binding by the treated biomass. Copper uptake decreased with an increasing dose of biosorbent, although enhancement in the total metal ion removal was observed at higher dose.     

Anreicherung von Cadmium in Biomassen

The uptake of cadmium ions from an aqueous solution by living, resting, and dead biomasses was investigated. The dependence of the uptaked amounts on pH-value of the medium, temperature and concentration of cadmium ions is demonstrated as well as the rate of uptake. Maximum realisable concentrations were 12 mg/g biomass in living cells and about 20 mg/g biomass in resting or dead cells, respectively.     

Evaluation of the marine algae Ulva fasciata and Sargassum sp. for the biosorption of Cu(II) from aqueous solutions

In this study, the adsorption properties of two different marine algae (Ulva fasciata (green algae) and Sargassum sp. (brown algae)) were investigated. Equilibrium isotherms and kinetics were studied to evaluate the relative ability of the two algae to sequester Cu(II) from aqueous solutions. The maximum biosorption capacity obtained was 73.5 mg g(-1) for U. fasciata and 72.5 mg g(-1) for Sargassum sp. at a solution pH of 5.5 +/- 0.5. A significant fraction of the total copper(II) uptake was achieved within 30 min. The copper(II) uptake by the biosorbents was best described by pseudo-second-order rate model.     

Removal of lead from aqueous solutions on palm shell activated carbon

The performance of a commercially available palm shell based activated carbon to remove lead ions from aqueous solutions by adsorption was evaluated. The adsorption experiments were carried out at pH 3.0 and 5.0. The effect of malonic and boric acid presence on the adsorption of lead ions was also studied. Palm shell activated carbon showed high adsorption capacity for lead ions, especially at pH 5 with an ultimate uptake of 95.2mg/g. This high uptake showed palm shell activated carbon as amongst the best adsorbents for lead ions. Boric acid presence did not affect significantly lead uptake, whereas malonic acid decreased it. The diffuse layer surface complexation model was applied to predict the extent of adsorption. The model prediction was found to be in concordance with the experimental values.     

Potential utilisation of sewage sludge and paper mill waste for biosorption of metals from polluted waterways

The adsorption of cadmium, copper(II), lead and zinc ions from aqueous solution by sewage sludge, paper mill waste (PMW) and composted PMW was investigated along with the influence of pre-treatment on composted PMW. Langmuir adsorption isotherms were fitted where appropriate. Sewage sludge was the most effective biosorbent of the waste products for all metal ions examined, adsorbing, for example, up to 39.3 mg/g of Pb at an initial concentration of 77.8 mg/l. PMW was a less effective biosorbent than sewage sludge. However, it was found that composting the PMW resulted in an increase in metal uptake capacity and both sewage sludge and composted PMW have potential for low-cost remediation of high leachate wastewaters. The desorption of metal ions from PMW compost was most effective using 0.1 N H2SO4 and 1 mM nitrilotriacetic acid (NTA).     

Biosorption characteristics of Aspergillus flavus biomass for removal of Pb(II) and Cu(II) ions from an aqueous solution

The Pb(II) and Cu(II) biosorption characteristics of Aspergillus flavus fungal biomass were examined as a function of initial pH, contact time and initial metal ion concentration. Heat inactivated (killed) biomass was used in the determination of optimum conditions before investigating the performance of pretreated biosorbent. The maximum biosorption values were found to be 13.46 +/- 0.99 mg/g for Pb(II) and 10.82 +/- 1.46 mg/g for Cu(II) at pH 5.0 +/- 0.1 with an equilibrium time of 2 h. Detergent, sodium hydroxide and dimethyl sulfoxide pretreatments enhanced the biosorption capacity of biomass in comparison with the heat inactivated biomass. The biosorption data obtained under the optimum conditions were well described by the Freundlich isotherm model. Competitive biosorption of Pb(II) and Cu(II) ions was also investigated to determine the selectivity of the biomass. The results indicated that A. flavus is a suitable biosorbent for the removal of Pb(II) and Cu(II) ions from aqueous solution.     

Improvement of heavy metal biosorption by mycelial dead biomasses (Rhizopus arrhizus, Mucor miehei and Penicillium chrysogenum): pH control and cationic activation

Abstract: Fungal mycelial by-products from fermentation industries present a considerable affinity for soluble metal ions (e.g. Zn, Cd, Ni, Pb, Cr, Ag) and could be used in biosorption processes for purification of contaminated effluents. In this work the influence of pH on sorption parameters is characterized by measuring the isotherms of five heavy metals (Ni, Zn, Cd, Ag and Pb) with Rhizopus arrhizus biomass under pH-controlled conditions. The maximum sorption capacity for lead was observed at pH 7.0 (200 mg g^-l), while silver uptake was weakly affected. The stability of metal-biosorbent complexes is regularly enhanced by pH neutralization, except for lead. A transition in sorption mechanism was observed above pH 6.0. In addition, comparison of various industrial fungal biomasses ( R. arrhizus, Mucor miehei and Penicillium chrysogenum indicated important variations in zinc-binding and buffering properties (0.24, 0.08 and 0.05 mmol g^−l, respectively). Without control, the equilibrium pH (5.8, 3.9 and 4.0) is shown to be related to the initial calcium content of the biosorbent, pH neutralization during metal adsorption increases zinc sorption in all fungi (0.57, 0.52 and 0.33 mmol g-l) but an improvement was also obtained (0.34, 0.33 and 0.10 mmol g⁻¹) by calcium saturation of the biomass before heavy metal accumulation. Breakthrough curves of fixed bed biosorbent columns demonstrated the capacity of the biosorbent process to purify zinc and lead solutions in continuous-flow systems, and confirmed the necessity for cationic activation of the biosorbent before contact with the heavy-metal solution.     

Cunninghamella echinulata a new biosorbent of metal ions from polluted water in Egypt

Thirty-two fungal species were isolated from a polluted watercourse near the Talkha fertilizer plant, Mansoura Province, Egypt. Aspergillus niger, A. flavus, Cunninghamella echinulata and Trichoderma koningii were isolated frequently. On the basis of its frequency, Cunninghamella echinulata was chosen for biosorption studies. Free and immobilized biomass of C. echinulata sequestered ions in this decreasing sequence is: Pb >Cu >Zn. The effects of biomass concentration, pH and time of contact were investigated. The level of ion uptake rose with increasing biomass. The maximum uptake for lead (45 mg/g), copper (20 mg/g) and zinc (18.8 mg/g) occurred at 200 mg/L biomass. The uptake rose with increasing pH up to 4 in the case of Pb and 5 in the case of Cu and Zn. Maximum uptake for all metals was achieved after 15 min. Ion uptake followed the Langmuir adsorption model, permitting the calculation of maximum uptake and affinity coefficients. Treatment of C. echinulata biomass with NaOH improved biosorbent capacity, as did immobilization with alginate. Immobilized biomass could be regenerated readily by treatment with dilute HCl. The biomass-alginate complex efficiently removed Pb, Zn and Cu from polluted water samples. Therefore,Cunninghamella echinulata could be employed either in free or immobilized form as a biosorbent of metal ions in waste water.     

Ion exchange during heavy metal bio-sorption from aqueous solution by dried biomass of macrophytes

In this study, potentials of oven dried biomass of Eichhornia crassipes, Valisneria spiralis and Pistia stratiotes, were examined in terms of their heavy metal (Cd, Ni, Zn, Cu, Cr and Pb) sorption capacity, from individual-metal and multi-metal aqueous solutions at pH 6.0+/-0.1 (a popular pH of industrial effluent). V. spiralis was the most and E. crassipes was the least efficient for removal of all the metals. Cd, Pb and Zn were efficiently removed by all the three biomass. Cd was removed up to 98% by V. spiralis. Sorption data for Cr, Ni and Cd fitted better to Langmuir isotherm equation, while, the sorption data for Pb, Zn and Cu fitted better to Freundlich isotherm equation. In general, the presence of other metal ions did not influence significantly the targeted metal sorption capacity of the test plant biomasses. Ion exchange was proven the main mechanism involved in bio-sorption and there was a strong ionic balance between adsorbed (H(+) and M(2+)) to the released ions (Na(+) and K(+)) to and from the biomass. No significant difference was observed in the metal exchanged amount, by doubling of metal concentration (15-30 mg/l) in the solution and employing individual-metal and multi-metal solutions.     

Biosorption of lead(II), cadmium(II), copper(II) and nickel(II) by anaerobic granular biomass

Biosorption is potentially an attractive technology for treatment of wastewater for retaining heavy metals from dilute solutions. This study investigated the feasibility of anaerobic granules as a novel type of biosorbent, for lead, copper, cadmium, and nickel removal from aqueous solutions. Anaerobic sludge supplied from a wastewater treatment plant in the province of Quebec was used. Anaerobic granules are microbial aggregates with a strong, compact and porous structure and excellent settling ability. After treatment of the biomass with Ca ions, the cation exchange capacity of the biomass was approximately 111 meq/100 g of biomass dry weight which is comparable to the metal binding capacities of commercial ion exchange resins. This work investigated the equilibrium, batch dynamics for the biosorption process. Binding capacity experiments using viable biomass revealed a higher value than those for nonviable biomass. Binding capacity experiments using non-viable biomass treated with Ca revealed a high value of metals uptake. The solution initial pH value affected metal sorption. Over the pH range of 4.0-5.5, pH-related effects were not significant. Meanwhile, at lower pH values the uptake capacity decreased. Time dependency experiments for the metal ions uptake showed that adsorption equilibrium was reached almost 30 min after metal addition. It was found that the q(max) for Pb2+, Cd2+, Cu2+, and Ni2+ ions, were 255, 60, 55, and 26 mg/g respectively (1.23, 0.53, 0.87, and 0.44 mmol/g respectively). The data pertaining to the sorption dependence upon metal ion concentration could be fitted to a Langmiur isotherm model. Based on the results, the anaerobic granules treated with Ca appear to be a promising biosorbent for removal of heavy metals from wastewater due to its optimal uptake of heavy metals, its particulate shape, compact porous structure, excellent settling ability, and its high mechanical strength.     

Biosorption of anionic textile dyes by nonviable biomass of fungi and yeast

The nonviable biomass of Aspergillus niger, Aspergillus japonica, Rhizopus nigricans, Rhizopus arrhizus, and Saccharomyces cerevisiae were screened for biosorption of textile dyes. The selected anionic reactive dyes were C.I. Reactive Black 8, C.I. Reactive Brown 9, C.I. Reactive Green 19, C.I. Reactive Blue 38, and C.I. Reactive Blue 3. Experiments were conducted at initial dye concentration of 50, 100, 150 and 200mg/L. The effect of initial dye concentration, dose of biosorbent loading, temperature, and pH on adsorption kinetics was studied. S. cerevisiae and R. nigricans were good biosorbents at initial dye concentration of 50mg/L, 1g% (w/v) biomass loading and 29+/-1 degrees C. R. nigricans adsorbed 90-96% dye in 15min, at 20 degrees C and pH 6.0. The data showed an optimal fit to the Langmuir and Freundlich isotherms. The maximum uptake capacity (Q(o)) for the selected dyes was in the range 112-204mg/g biomass.     

Removal of lead from aqueous solutions by Penicillium biomass

The removal of lead ions from aqueous solutions by adsorption on nonliving Penicillium chrysogenum biomass was studied. Biosorption of the Pb(+2) ion was strongly affected by pH. Within a pH range of 4 to 5, the saturated sorption uptake of Pb(+2) was 116 mg/g dry biomass, higher than that of activated charcoal and some other microorganisms. At pH 4.5, P. chrysogenum biomass exhibited selectivity for Pb(+2) over other metal ions such as Cd(+2), Cu(+2), Zn(+2), and As(+3) Sorption preference for metals decreased in the following order: Pb > Cd > Cu > Zn > As. The sorption uptake of Pb(+2) remained unchanged in the presence of Cu(+2) and As(+3), it decreased in the presence of Zn(+2), and increased in the presence of Cd(+2). (c) 1993 John Wiley & Sons, Inc.     

Application of seaweeds for the removal of lead from aqueous solution

Ten different seaweed species were compared on the basis of lead uptake at different pH conditions. The brown seaweed, Turbinaria conoides, exhibited maximum lead uptake (at pH 4.5) and hence was selected for further studies. Sorption isotherms, obtained at different pH (4–5) and temperature (25–35 °C) conditions were fitted using Langmuir and Sips models. According to the Langmuir model, the maximum lead uptake of 439.4 mg/g was obtained at optimum pH (4.5) and temperature (30 °C). The Sips model better described the sorption isotherms with high correlation coefficients at all conditions examined. Various thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated indicating that the present system was a spontaneous and endothermic process. Through potentiometric titrations, number of binding sites (carboxyl groups) and pK₁ were determined as 4.1 mmol/g and 4.4, respectively. The influence of co-ions (Na⁺, K⁺, Mg²⁺ and Ca²⁺) on lead uptake was well pronounced in the case of divalent ions compared to monovalent ions. The solution of 0.1 M HCl successfully eluted all lead ions from lead-loaded T. conoides biomass. The regeneration experiments revealed that the alga could be successfully reused for five cycles without any loss in lead biosorption capacity. A glass column (2 cm i.d. and 35 cm height) was used to study the continuous lead biosorption performance of T. conoides. At 25 cm (bed height), 5 ml/min (flow rate) and 100 mg/l (initial lead concentration), T. conoides exhibited lead uptake of 220.1 mg/g. The column was successfully eluted using 0.1 M HCl, with elution efficiency of 99.7%.     

白腐真菌吸附铅的研究

含重金属废水的传统处理方法有化学沉淀法、离子交换法、吸附法、电解法和膜分离法等,它们虽然也能达到一定的净化效果,但因过程繁琐并易造成二次污染而不够理想,尤其是金属离子浓度较低时,往往操作费用和原材料成本相对过高。近年来采用生物吸附法去除废水中的重金属...     

Entrapment of white-rot fungus Trametes versicolor in Ca-alginate beads: preparation and biosorption kinetic analysis for cadmium removal from an aqueous solution

The biosorption of cadmium ions onto entrapped Trametes versicolor mycelia has been studied in a batch system. The maximum experimental biosorption capacities for entrapped live and dead fungal mycelia of T. versicolor were found as 102.3 +/- 3.2 mg Cd(II) g(-1) and 120.6 +/- 3.8 mg Cd(II) g(-1), respectively. Biosorption equilibrium was established in about 1 h and biosorption was well described by the Langmuir and Freundlich biosorption isotherms. The change in the biosorption capacity with time was found to fit the pseudo-second-order equation. Since the biosorption capacities were relatively high for both entrapped live and dead forms, those fungal forms could be considered as suitable biosorbents for the removal of cadmium in wastewater-treatment systems. The biosorbents were reused in three consecutive adsorption/desorption cycles without a significant loss in the biosorption capacity.     

Highly enhanced adsorption for decontamination of lead ions from battery wastewaters using chitosan functionalized with xanthate

Decontamination of lead ions from aqueous media has been investigated using cross linked xanthated chitosan (CMC) as an adsorbent. Various physico-chemical parameters such as contact time, amount of adsorbent, concentration of adsorbate were optimized to simulate the best conditions which can be used to decontaminate lead from aqueous media using CMC as an adsorbent. The atomic absorption spectrometric technique was used to determine the distribution of lead. Maximum adsorption was observed at both pH 4 and 5. The adsorption data followed both Freundlich and Langmuir isotherms. Langmuir isotherm gave a saturated capacity of 322.6+/-1.2mg/g at pH 4. From the FTIR spectra analysis, it was concluded that xanthate and amino group participate in the adsorption process. The developed procedure was successfully applied for the removal of lead ions from real battery wastewater samples.     

Biosorption of cesium-137 and strontium-90 by mucilaginous seeds of Ocimum basilicum

Mucilaginous seeds of Ocimum basilicum were used in uptake studies with cesium-137 and strontium-90. Results showed that uptake was dependent on the structural integrity of the mucilage fibrils. Water imbibed seeds showed higher adsorption of both 137Cs and 90Sr in comparison to seeds pretreated with NaOH, HCl and Na-periodate solution. The uptake was pH dependent and while some divalent metal ions had no or little detrimental effect, the alkali metal ions Li+, Na+ and K+ decreased the uptake. The maximum adsorption capacity was 160 mg cesium g(-1) and 247 mg strontium g(-1) seed dry weight.     

Biosorption of mercury by the inactivated cells of pseudomonas aeruginosa PU21 (Rip64)

Biomass of a mercury-resistant strain Pseudomonas aeruginosa PU21 (Rip64) and hydrogen-form cation exchange resin (AG 50W-X8) were investigated for their ability to adsorb mercury. The maximum adsorption capacity was approximately 180 mg Hg/g dry cell in deionized water and 400 mg Hg/g dry cell in sodium phosphate solution at pH 7.4, higher than the maximum mercury uptake capacity in the cation exchange resin (100 mg Hg/g dry resin in deionized water). The mercury selectivity of the biomass over sodium ions was evaluated when 50 mM and 150 mM of Na(+) were present. Biosorption of mercury was also examined in sodium phosphate solution andphosphate-buffered saline solution (pH 7.0), containing 50mM and 150 mM of Na(+), respectively. It was found that the presence of Na(+) did not severely affect the biosorption of Hg(2+), indicating a high mercury selectivity ofthe biomass over sodium ions. In contrast, the mercury uptake by the ion exchange resin was strongly inhibited by high sodium concentrations. The mercury biosorption was most favorable in sodium phosphate solution (pH 7.4), with a more than twofold increase in the maximum mercury uptake capacity. The pH was found to affect the adsorption of Hg(2+)bythe biomass and the optimal pH value was approximately 7.4. The adsorption of mercury on the biomass and the ion exchange resin appeared to follow theLangmuir or Freundlich adsorption isotherms. (c) 1994 John Wiley & Sons, Inc.     

Enhancement of Lead(II) Biosorption by Microalgal Biomass Immobilized onto Loofa (Luffa cylindrica) Sponge

A unicellular green microalga, Chlorella sorokiniana, was immobilized on loofa (Luffa cylindrica) sponge and successfully used as a new biosorption system for the removal of lead(II) ions from aqueous solutions. The biosorption of lead(II) ions on both free and immobilized biomass of C. sorokiniana was investigated using aqueous solutions in the concentration range of 10–300 mg/L. The biosorption of lead(II) ions by C. sorokiniana biomass increased as the initial concentration of lead(II) ions increased in the medium. The maximum biosorption capacity for free and immobilized biomass of C. sorokiniana was found to be 108.04 and 123.67 mg lead(II)/g biomass, respectively. The biosorption kinetics were found to be fast, with 96 % of adsorption within the first 5 min and equilibrium reached at 15 min. The adsorption of lead(II) both by free and immobilized C. sorokiniana biomass followed the Langmuir isotherm. The biosorption capacities were detected to be dependent on the pH of the solution; and the maximum adsorption was obtained at a solution pH of about 5. The effect of light metal ions on lead(II) uptake was also studied and it was shown that the presence of light metal ions did not significantly affect lead(II) uptake. The loofa sponge‐immobilized C. sorokiniana biomass could be regenerated using 0.1 M HCl, with up to 99 % recovery. The desorbed biomass was used in five biosorption‐desorption cycles, and no noticeable loss in the biosorption capacity was observed. In addition, fixed bed breakthrough curves for lead(II) removal were presented. These studies demonstrated that loofa sponge‐immobilized biomass of C. sorokiniana could be used as an efficient biosorbent for the treatment of lead(II) containing wastewater.