Untangling the Tangle-Web: Web Construction Behavior of the Comb-Footed Spider Steatoda triangulosa and Comments on Phylogenetic Implications (Araneae: Theridiidae)

Theridiidae typically construct a three-dimensional web often described as irregular. The web consists of a supporting structure and lines under tension termed gumfooted lines. We used automated methods to observe web construction in the theridiid Steatoda triangulosa under laboratory conditions. Web construction lasted several nights. After orientation, spiders built a three-dimensional structure of several threads radiating sideways and downward from the retreat. To build gumfooted lines, they started from the retreat, moved along a structural thread, then dropped down to attach the thread to the lower substrate. On returning, they coated the lowest part of the thread with viscid silk before moving up along the same thread back to the structural thread. They then continued moving along the same structural thread to drop down again to build the next gumfooted line. This behavior was continued until the spiders had built a series of gumfooted lines (a bout). There were regular intervals between the construction of two bouts. Thus, a single web included many bouts built in different stages. We show that gumfooted lines are not homologues to sticky web elements of orb-weavers and present new synapomorphic characters that support the monophyly of Theridiidae + Nesticidae and the monophyly of araneoid sheet web weavers. Further, the time allocation pattern for different behavioral stages and the fine structure of a gumfooted line are presented.     

Spiders spinning electrically charged nano-fibres

Most spider threads are on the micrometre and sub-micrometre scale. Yet, there are some spiders that spin true nano-scale fibres such as the cribellate orb spider, Uloborus plumipes. Here, we analyse the highly specialized capture silk-spinning system of this spider and compare it with the silk extrusion systems of the more standard spider dragline threads. The cribellar silk extrusion system consists of tiny, morphologically basic glands each terminating through exceptionally long and narrow ducts in uniquely shaped silk outlets. Depending on spider size, hundreds to thousands of these outlet spigots cover the cribellum, a phylogenetically ancient spinning plate. We present details on the unique functional design of the cribellate gland–duct–spigot system and discuss design requirements for its specialist fibrils. The spinning of fibres on the nano-scale seems to have been facilitated by the evolution of a highly specialist way of direct spinning, which differs from the aqua-melt silk extrusion set-up more typical for other spiders.     

Prey attraction as a possible function of the silk decoration of the uloborid spider Octonoba sybotides

Both laboratory experiments and field observations were usedto examine the prey-attraction hypothesis for the function ofthe silk decoration on the orb web of Octonoba sybotides. Thereflectance spectrum of the decorative silk showed that thedecorations reflect relatively more ultraviolet (UV) light.Choice experiments were conducted using Drosophila melanogaster,a common prey species of the spider, to determine whether webswith silk decoration attract more flies than undecorated webs.The choice experiment showed that webs with silk decorationattract more flies in light that includes UV rays. However,flies choose their flight direction randomly in light withoutUV rays. This suggests that the silk decoration might attract preyinsects that tend to fly toward UV-reflecting objects. Fieldobservations comparing the prey capture rate between webs withand without a silk decoration showed that more prey are caughtin decorated webs. In this study, no difference between thetwo forms of silk decoration, linear and spiral, was detectedeither in prey attraction in the choice experiment or in theprey capture rate in the field observations.     

An order-specific monoclonal antibody to Diptera reveals the impact of alternative prey on spider feeding behavior in a complex food web

Generalist predators have the capacity to restrict pest population growth, especially early in the season before densities increase. However, their polyphagous feeding habits sometimes translate into reduced pest consumption when they target alternative prey. An order-specific monoclonal antibody was developed to examine the strength of trophic connections between Diptera, a major category of non-pest prey, and linyphiid spiders in alfalfa. We report the development and characterization of a monoclonal antibody with order-level specificity to Diptera. This antibody elicited strong absorbance to 22 Diptera from 13 families, no false-positive reactivity to non-dipteran invertebrates, and antigen detection periods following prey consumption that were comparable between spiders. Over 900 field-collected females of the linyphiid spiders Erigone autumnalis and Bathyphantes pallidus were screened for Diptera antigen. Significantly more B. pallidus screened positive for Diptera (40%) compared to E. autumnalis (16%), indicating differential reliance on these prey. In parallel with the collection of spiders for gut-content analysis, prey availability was estimated at web sites. The two spiders exhibited different feeding responses to prey availability. Consumption of Diptera by B. pallidus was strongly correlated with Diptera abundance whilst the availability of other potential prey did not influence predation rates. Conversely, E. autumnalis did not prey upon Diptera in proportion to availability, but increased Collembola activity-density reduced dipteran consumption. Integration of molecular gut-content analysis with precise sampling of prey demonstrated how two closely related linyphiid spiders exhibit different feeding responses to the availability of prey under natural field conditions. Elucidating the feeding preferences of natural enemies is critical to effective incorporation of biological control by generalist predators in the management of agricultural pests.     

Consumption of aphids by spiders and the effect of additional prey: evidence from microcosm experiments

Spiders are common generalist predators in agroecosystems and have been suggested to lower herbivore abundance in crops. It is not clear, however, if spiders can effectively suppress pest populations, and if so, by what mechanisms. In a microcosm experiment, we examined the consumption of the bird cherry-oat aphid, Rhopalosiphum padi L. (Homoptera: Aphididae), a pest species in wheat fields, by three spider species that differ in their hunting methods. We then tested the effect of additional prey type on the ability of erigonid spiders to reduce aphids. In a 48-h experiment Mermessus denticulatus (Banks) (Araneae: Linyphiidae; Erigoninae) consumed more aphids than did Enoplognatha gemina Bosmans and Van Keer (Araneae: Theridiidae) and Bathyphantes cf. extricatus (O·P.-Cambridge) (Araneae: Linyphiidae; Linyphiinae). This difference may be due to the ability of erigonids to forage actively on the vegetation in addition to using their webs to catch prey. In a 7-week experiment, we provided springtails (Collembola) in high and low densities as additional prey to mated erigonids, prior to aphid introduction. Spiders in the low-density springtail treatment built more webs on the vegetation, and caused a 50% reduction in aphid populations. There were significantly fewer aphids in the low-density springtail treatment, but not in the high-density treatment, in comparison to the control (high-density springtails without spiders). The results suggest that additional prey density affects predatory interactions between M. denticulatus and R. padi and that erigonids, which occur in high densities in wheat fields in the Negev desert, may be involved in aphid suppression in these agroecosystems.

An organic coating keeps orb‐weaving spiders (Araneae,Araneoidea, Araneidae) from sticking to their own capture threads

More than 95% of orb‐weaving spider species ensure prey capture success by producing viscous threads equipped with gluey droplets. However, this trap may bear serious risks for the web‐inhabiting spider as well. The obvious question, how a spider avoids getting stuck in its own capture spiral, has gained little scientific attention up till now. In 1905, the French naturalist Jean‐Henry Fabre concluded from anecdotal observation that orb‐weaving spiders protect themselves by a fatty surface coating. Here, we test this hypothesis by indirectly measuring the force necessary to detach an autotomized spider’s leg from the capture spiral of its own web (here called ‘index of adhesion’, IOA). Three groups of legs, each of the species Araneus diadematus Clerck, 1757 and Larinioides sclopetarius (Clerck, 1757), were tested. One was left untreated, one was washed with distilled water (H₂O), and one was washed with the organic solvent carbon disulphide (CS₂). In both species, we found a weak IOA between the spider leg and the gluey capture spiral in untreated and water‐washed legs without significant differences between the two. The IOA approximately doubled, when spider legs had been washed with carbon disulphide prior to measurement, that is, the CS₂‐washed legs stuck significantly more strongly than the untreated and water‐washed legs. These results provide indirect evidence for a protective anti‐adhesive organic coating on the spider’s body surface and so support Fabre’s hypothesis.     

Prey capture in Dysdera crocata (Araneae: Dysderidae), a long fanged spider

Abstract

The manner in which Dysdera crocata used its large chelicerae was described. Previous claims that the chelicerae are adaptations enabling the spider to penetrate the dorsal carapace of its prey (woodlice) were not supported.     

Web-site selection strategies of linyphiid spiders in alfalfa: implications for biological control

Site-specific foraging can enhance the ability of generalist predators to provide effective and sustainable levels of pest control in agroecosystems. This can result from increased growth rates, higher population densities, and improved capture frequencies of pests at high prey density microsites. We tested the hypothesis that linyphiid spiders would exhibit microhabitat-specific web-site selection strategies in alfalfa. This was predicted to result in high prey densities at web-sites compared to paired non-web-sites through direct, or indirect, selection of prey-rich habitats. A total of 22,242 potential prey items were collected from mini-sticky traps located at 896 microsites. Web-centered mini-sticky traps on the ground, representative of Erigone autumnalis Emerton (Araneae: Linyphiidae) webs, captured similar numbers of potential prey as paired non-web-centered traps nearby. However, aerial sticky traps at web-sites of Bathyphantes pallidus (Banks) (Araneae: Linyphiidae) contained significantly more Diptera and Empoasca fabae (Harris) (Homoptera: Cicadellidae) than paired non-web-centered sticky-traps. Prey activity-densities also varied between web-sites of E. autumnalis and B. pallidus. Diptera were dominant at aerial microsites of B. pallidus whilst Collembola were abundant on ground-based traps of E. autumnalis. These results suggest that in alfalfa, the pressure for selecting prey-rich web-sites by erigonine spiders is low, but B. pallidus exhibits a selective web-location strategy targeted towards high quality dipteran prey. These sites also captured large numbers of E. fabae, a major pest of alfalfa, thus implicating aerial-based linyphiines as valuable predators in biological control.     

Fine Structure of Scorpion Pectines for Odor Capture

The paper revealed the fine structure of the scorpion (Mesobuthus martensii) pectines and showed how the fine structure of the pecten influences odor flow.The first step of our investigation was to prove that scorpion pectines work as olfactory and this was done via experiments utilizing paraffin coverage.Subsequently,the location,morphology,section structure,and arrangement of the pectines were studied via stereomicroscopy and Scanning Electron Microscopy (SEM).The fine structure ofpecten comprises a comb-like structure with 24-30 knife-like teeth and thousands of micron bowl-like pecten sensilla in staggered arrangement on the surface of the tooth.Computational Fluid Dynamics (CFD) was applied to predict odor flow around the pecten via the relevant Reynolds numbers.The comb-like structure amplified the odor flow velocity similar to an amplifier,transporting the odor flow of increased velocity to the micron pecten sensilla,improving transport efficiency of the odor flow.The staggered arrangement of the pecten sensilla generated a vortex,improving contact duration between pecten sensilla and odorant molecules.Thus,the pecten finc structure was likely acting as an effective comb with non-smooth teeth for the transport and capture of odorant molecules.     

悦目金蛛和棒络新妇卵袋丝物理化学结构表征及其力学性能研究

蜘蛛丝是一种具有优良机械性能的天然动物蛋白纤维,它特有的结构和性能与其生物学功能密切相关。作者采用氨基酸自动分析仪、傅立叶转换红外光谱仪、扫描电镜和电子单纤强力仪对悦目金蛛（Argiope amoena）和棒络新妇（Nephila clavata）的卵袋丝进行了物理化学结构表征与力学性能的研究,结果表明两种蜘蛛卵袋均由微米级柱状腺丝、大壶状腺丝、亚微米级或纳米级葡萄状腺丝构成。卵袋丝的表面形貌特征、极性氨基酸含量、大侧链与小侧链氨基酸的比值、无定型区、β-折叠结构与结晶结构的含量等氨基酸组成种类与蛋白质二级结构特征,均满足各自生物学功能对断裂强度、延展性、初始模量等力学性能的要求。     

二化螟盘绒茧蜂茧丝纤维的形态结构与理化性能

本文通过扫描电镜（SEM）、氨基酸分析、傅立叶红外光谱（FTIR）、X射线晶体衍射（XRD）和热重分析（TG）等技术对二化螟盘绒茧蜂Cotesia chilonis茧丝纤维的微观形态、氨基酸类别与组成、二级结构和热稳定性等作了分析。结果表明,二化螟盘绒茧蜂的茧丝纤维表面较为粗糙,直径为1.89 ± 0.04 μm。茧丝纤维主要由碳（60.67%）、氮（21.17%）和氧（17.22%）等元素组成,其丝蛋白主要成分包括天冬氨酸/天冬酰胺、丝氨酸和丙氨酸等;蛋白二级结构主要为β-折叠;其峰值降解温度为332.27℃ ± 2.58℃。本文研究揭示了二化螟盘绒茧蜂茧丝纤维的结构特征与理化性能,为拓展该蜂的应用领域、开发性能优越的非蚕丝蛋白以及设计改造新型丝蛋白纤维提供基础。     

羟基磷灰石/柞蚕丝素（HA/TSF骨仿生纳米纤维的生物学性能研究

目的：柞蚕丝素（tussah silk fibroin,TSF）和羟基磷灰石（hydroxyapatite,HA）均具有良好的生物活性和生物相容性,是组织工程研究的热点i,但结构单一及微米级的材料所表现出的性能简单,不能满足人们对生物材料支架性能的要求,本课题将两者按不同比例进行复合,探讨不同皮芯比例羟基磷灰石／柞蚕丝素（HA／TSF）的骨仿生纳米纤维的生物学性能。方法：首先利用同轴静电纺丝技术,以TSF水溶液为皮,HA水溶液为芯,制备不同皮芯比例的HA／TSF骨仿生纳米纤维,然后将人成骨肉瘤细胞（MG-63）种植在不同皮芯比例的HA／TSF纳米纤维上。在不同的时间点分别通过倒置显微镜、扫描电镜观察细胞形态学变化;通过四甲基偶氮噻唑蓝比色（Four methyl azo thiazole blue colorimetric, MTT）法、碱性磷酸酶（alkaline phosphatase,ALP）活性检测法观察细胞在材料表面的增殖和分化,从多角度来评价材料的生物学性能。结果：通过形态学观察,SEM观察以及MTT检测,发现除空白对照组外,各组样品均显示良好的生物相容性,均能促进细胞的黏附、增殖,尤以HA／TSF为2：1时最明显;通过MG-63细胞的ALP活性检测,发现当HA／TSF比例为2：1时,最能促进细胞ALP活性的表达,有利于诱导成骨细胞的分化。结论：皮芯结构的HA／TSF骨仿生纳米纤维具有良好的生物学性能,且二者在自然界来源丰富,价格便宜,为临床骨组织缺损修复的应用奠定了一定的实验基础     

Review of the effects of within-patch scale structural complexity on seagrass fishes

Studies on the effects of within-patch scale structure of seagrass habitats on predator–prey fish interactions and abundance/habitat use patterns were reviewed. Most laboratory experiments have employed chase-and-attack predators, usually resulting in lower foraging efficiency in (denser) seagrass. However, a few laboratory procedures employed alternative foraging tactics, resulting in no differences in prey mortality rates. Field studies did not always result in lower prey mortality rates in seagrass habitats. Accordingly, it is premature to conclude that seagrass presence is almost always negatively related to predator foraging efficiency or that increasing seagrass abundance is usually associated with a decrease in predator efficiency. Because several categories of predator and prey fishes occur in seagrass habitats, further studies are needed with all of these predator–prey combinations, in order to fully clarify predator–prey fish interactions in association with seagrass structure. Seagrass fishes have been shown to respond to alterations in seagrass structure in various ways: seagrass height and/or density reduction or clearance resulted in decreased abundance of some species but increases or no change in others. Some explanations have been proposed, not all mutually exclusive, for these phenomena. Although within-patch scale processes have been well studied, room exists for improvement. For example, predator–prey fish interactions in relation to varying within-patch scale complexity is not yet fully understand. The relationships of patch size, edge effects and within-patch scale complexity also still remain unclear. Further studies, which add to the clarification of within-patch scale process, will in turn improve our understanding of larger spatial scale processes.