Cranial mechanics and feeding in Tyrannosaurus rex

It has been suggested that the large theropod dinosaur Tyrannosaurus rex was capable of producing extremely powerful bite forces and resisting multi-directional loading generated during feeding. Contrary to this suggestion is the observation that the cranium is composed of often loosely articulated facial bones, although these bones may have performed a shock-absorption role. The structural analysis technique finite element analysis (FEA) is employed here to investigate the functional morphology and cranial mechanics of the T. rex skull. In particular, I test whether the skull is optimized for the resistance of large bi-directional feeding loads, whether mobile joints are adapted for the localized resistance of feeding-induced stress and strain, and whether mobile joints act to weaken or strengthen the skull overall. The results demonstrate that the cranium is equally adapted to resist biting or tearing forces and therefore the 'puncture-pull' feeding hypothesis is well supported. Finite-element-generated stress-strain patterns are consistent with T. rex cranial morphology: the maxilla-jugal suture provides a tensile shock-absorbing function that reduces localized tension yet 'weakens' the skull overall. Furthermore, peak compressive and shear stresses localize in the nasals rather than the fronto-parietal region as seen in Allosaurus, offering a reason why robusticity is commonplace in tyrannosaurid nasals.     

Maximum Bite Force and Prey Size of Tyrannosaurus rex and Their Relationships to the Inference of Feeding Behavior

The feeding behavior of the theropod dinosaur Tyrannosaurus rex is investigated through analysis of two variables that are critical to successful predation, bite force and prey body mass, as they scale with the size of the predator. These size-related variables have important deterministic effects on the predator’s feeding strategy, through their effects on lethal capacity and choice of prey. Bite force data compiled for extant predators (crocodylians, carnivorans, chelonians and squamates) are used to establish a relationship between bite force and body mass among extant predators. These data are used to estimate the maximum potential bite force of T. rex, which is between about 183,000 and 235,000 N for a bilateral bite. The relationship between maximum prey body mass and predator body mass among the same living vertebrates is used to infer the likely maximum size of prey taken by T. rex in the Late Cretaceous. This makes it possible to arrive at a more rigorous assessment of the role of T. rex as an active predator and/or scavenger than has hitherto been possible. The results of this analysis show that adult Triceratops horridus fall well within the size range of potential prey that are predicted to be available to a solitary, predaceous T. rex. This analysis establishes boundary conditions for possible predator/prey relationships among other dinosaurs, as well as between these two taxa.     

Feeding biomechanics and theoretical calculations of bite force in bull sharks (Carcharhinus leucas) during ontogeny

Evaluations of bite force, either measured directly or calculated theoretically, have been used to investigate the maximum feeding performance of a wide variety of vertebrates. However, bite force studies of fishes have focused primarily on small species due to the intractable nature of large apex predators. More massive muscles can generate higher forces and many of these fishes attain immense sizes; it is unclear how much of their biting performance is driven purely by dramatic ontogenetic increases in body size versus size-specific selection for enhanced feeding performance. In this study, we investigated biting performance and feeding biomechanics of immature and mature individuals from an ontogenetic series of an apex predator, the bull shark, Carcharhinus leucas (73–285 cm total length). Theoretical bite force ranged from 36 to 2128 N at the most anterior bite point, and 170 to 5914 N at the most posterior bite point over the ontogenetic series. Scaling patterns differed among the two age groups investigated; immature bull shark bite force scaled with positive allometry, whereas adult bite force scaled isometrically. When the bite force of C. leucas was compared to those of 12 other cartilaginous fishes, bull sharks presented the highest mass-specific bite force, greater than that of the white shark or the great hammerhead shark. A phylogenetic independent contrast analysis of anatomical and dietary variables as determinants of bite force in these 13 species indicated that the evolution of large adult bite forces in cartilaginous fishes is linked predominantly to the evolution of large body size. Multiple regressions based on mass-specific standardized contrasts suggest that the evolution of high bite forces in Chondrichthyes is further correlated with hypertrophication of the jaw adductors, increased leverage for anterior biting, and widening of the head. Lastly, we discuss the ecological significance of positive allometry in bite force as a possible “performance gain” early in the life history of C. leucas.     

Disparity between Feeding Performance and Predicted Muscle Strength in the Pharyngeal Musculature of Black Drum, Pogonias cromis (Sciaenidae)

Synopsis Pogonias cromis, black drum, is the largest durophagous sciaenid and feeds almost exclusively on hard-shelled bivalves and gastropods using powerful pharyngeal jaws. I estimated pharyngeal jaw bite forces used to crush live molluscs during feeding trials from juvenile and young adult Pogonias cromis, and they are the highest yet documented for bony fishes. Crushing ability in P. cromis scaled with strong positive allometry suggesting large adult fish may have one of the strongest bites among vertebrates. Physiological estimates of pharyngeal muscle strength derived from muscle cross sectional area accounted for only half of the force generated during actual feeding performance trials. The significant disparity between feeding performance and pharyngeal muscle strength in P. cromis indicates the presence of novel biomechanical linkages that enhance crushing ability for feeding on hard-shelled molluscs. I present a biomechanical model in which the lower pharyngeal jaw architecture of P. cromis emulates a second class lever mechanism that can amplify muscle forces transmitted to the shell of the prey.     

Feeding mechanics and bite force modelling of the skull of Dunkleosteus terrelli, an ancient apex predator

Placoderms are a diverse group of armoured fishes that dominated the aquatic ecosystems of the Devonian Period, 415-360 million years ago. The bladed jaws of predators such as Dunkleosteus suggest that these animals were the first vertebrates to use rapid mouth opening and a powerful bite to capture and fragment evasive prey items prior to ingestion. Here, we develop a biomechanical model of force and motion during feeding in Dunkleosteus terrelli that reveals a highly kinetic skull driven by a unique four-bar linkage mechanism. The linkage system has a high-speed transmission for jaw opening, producing a rapid expansion phase similar to modern fishes that use suction during prey capture. Jaw closing muscles power an extraordinarily strong bite, with an estimated maximal bite force of over 4400 N at the jaw tip and more than 5300 N at the rear dental plates, for a large individual (6 m in total length). This bite force capability is the greatest of all living or fossil fishes and is among the most powerful bites in animals.     

Connecting behaviour and performance: the evolution of biting behaviour and bite performance in bats

Variation in behaviour, performance and ecology are traditionally associated with variation in morphology. A neglected part of this ecomorphological paradigm is the interaction between behaviour and performance, the ability to carry out tasks that impact fitness. Here we investigate the relationship between biting behaviour and performance (bite force) among 20 species of ecologically diverse bats. We studied the patterns of evolution of plasticity in biting behaviour and bite force, and reconstructed ancestral states for behaviour and its plasticity. Both behavioural and performance plasticity exhibited accelerating evolution over time, and periods of rapid evolution coincided with major dietary shifts from insect‐feeding to plant‐feeding. We found a significant, positive correlation between behavioural plasticity and bite force. Bats modulated their performance by changing their biting behaviour to maximize bite force when feeding on hard foods. The ancestor of phyllostomids was likely a generalist characterized by high behavioural plasticity, a condition that also evolved in specialized frugivores and potentially contributed to their diversification.     

Comparative analysis of methods for determining bite force in the spiny dogfish Squalus acanthias

Many studies have identified relationships between the forces generated by the cranial musculature during feeding and cranial design. Particularly important to understanding the diversity of cranial form amongst vertebrates is knowledge of the generated magnitudes of bite force because of its use as a measure of ecological performance. In order to determine an accurate morphological proxy for bite force in elasmobranchs, theoretical force generation by the quadratomandibularis muscle of the spiny dogfish Squalus acanthias was modeled using a variety of morphological techniques, and lever-ratio analyses were used to determine resultant bite forces. These measures were compared to in vivo bite force measurements obtained with a pressure transducer during tetanic stimulation experiments of the quadratomandibularis. Although no differences were found between the theoretical and in vivo bite forces measured, modeling analyses indicate that the quadratomandibularis muscle should be divided into its constituent divisions and digital images of the cross-sections of these divisions should be used to estimate cross-sectional area when calculating theoretical force production. From all analyses the maximum bite force measured was 19.57 N. This relatively low magnitude of bite force is discussed with respect to the ecomorphology of the feeding mechanism of S. acanthias to demonstrate the interdependence of morphology, ecology, and behavior in organismal design.     

云南西双版纳蝙蝠咬合力及生态位分化

咬合力与动物咀嚼系统的形态特征以及食物硬度有关,是评价动物取食行为的重要指标之一。本文于2012年4月在云南西双版纳对食果、食蜜和食虫3种食性的12种蝙蝠咬合力进行研究,使用咬合力探测仪测量蝙蝠手持状态下的咬合力,分析不同食性蝙蝠咬合力的差异,并与其体型（体重、前臂长、头长）进行相关分析。结果表明,3种食性蝙蝠的咬合力存在显著差异,食果蝙蝠咬合力最大,其次为食蜜蝙蝠,食虫蝙蝠咬合力最小;但是去除体重因素的影响之后,不同食性蝙蝠的咬合力则差异不显著。蝙蝠咬合力与体重、前臂长、头长均呈显著正相关。本文研究结果表明,体重是影响蝙蝠咬合力的主要因素,食性在一定程度上也对咬合力产生影响,食蜜蝙蝠吻部延长,头长上的特化导致其咬合力的减弱。     

Insights into the ecology and evolutionary success of crocodilians revealed through bite-force and tooth-pressure experimentation

Background

Crocodilians have dominated predatory niches at the water-land interface for over 85 million years. Like their ancestors, living species show substantial variation in their jaw proportions, dental form and body size. These differences are often assumed to reflect anatomical specialization related to feeding and niche occupation, but quantified data are scant. How these factors relate to biomechanical performance during feeding and their relevance to crocodilian evolutionary success are not known.

Methodology/Principal Findings

We measured adult bite forces and tooth pressures in all 23 extant crocodilian species and analyzed the results in ecological and phylogenetic contexts. We demonstrate that these reptiles generate the highest bite forces and tooth pressures known for any living animals. Bite forces strongly correlate with body size, and size changes are a major mechanism of feeding evolution in this group. Jaw shape demonstrates surprisingly little correlation to bite force and pressures. Bite forces can now be predicted in fossil crocodilians using the regression equations generated in this research.

Conclusions/Significance

Critical to crocodilian long-term success was the evolution of a high bite-force generating musculo-skeletal architecture. Once achieved, the relative force capacities of this system went essentially unmodified throughout subsequent diversification. Rampant changes in body size and concurrent changes in bite force served as a mechanism to allow access to differing prey types and sizes. Further access to the diversity of near-shore prey was gained primarily through changes in tooth pressure via the evolution of dental form and distributions of the teeth within the jaws. Rostral proportions changed substantially throughout crocodilian evolution, but not in correspondence with bite forces. The biomechanical and ecological ramifications of such changes need further examination.     

Insularity affects head morphology,bite force and diet in a Mediterranean lizard

Island environments differ with regard to numerous features from the mainland and may induce large‐scale changes in most aspects of the biology of an organism. In this study, we explore the effect of insularity on the morphology and performance of the feeding apparatus, a system crucial for the survival of organisms. To this end, we examined the head morphology and feeding ecology of island and mainland populations of the Balkan green lizard, Lacerta trilineata. We predicted that head morphology, performance and diet composition would differ between sexes and habitats as a result of varying sexual and natural selection pressures. We employed geometric morphometrics to test for differences in head morphology, measured bite forces and analysed the diet of 154 adult lizards. Morphological analyses revealed significant differences between sexes and also between mainland and island populations. Relative to females, males had larger heads, a stronger bite and consumed harder prey than females. Moreover, island lizards differed in head shape, but not in head size, and, in the case of males, demonstrated a higher bite force. Islanders had a wider food niche breadth and included more plant material in their diet. Our findings suggest that insularity influences feeding ecology and, through selection on bite force, head morphology. © 2014 The Linnean Society of London, Biological Journal of the Linnean Society, 2014, 112 , 469–484.     

Linking Laboratory and Field Approaches in Studying the Evolutionary Physiology of Biting in Bamboo Lemurs

A realistic understanding of primate morphological adaptations requires a multidisciplinary approach including experimental studies of physiological performance and field studies documenting natural behaviors and reproductive success. For primate feeding, integrative efforts combining experimental and ecological approaches are rare. We discuss methods for collecting maximum bite forces in the field as part of an integrated ecomorphological research design. Specifically, we compare maximum biting ability in 3 sympatric bamboo lemurs (Hapalemur simus, H. aureus, and H. griseus) at Ranomafana National Park, Madagascar to determine if biting performance contributes to the observed partitioning of a shared bamboo diet. We assessed performance by recording maximum bite forces via jaw-muscle stimulations in anesthetized subjects from each species. Behavioral observations and food properties testing show that the largest species, Hapalemur simus, consumes the largest and most mechanically challenging foods. Our results suggest that Hapalemur simus can generate larger bite forces on average than those of the 2 smaller species. However, the overlap in maximum biting ability between Hapalemur simus and H. aureus indicates that biting performance cannot be the sole factor driving dietary segregation. Though maximum bite force does not fully explain dietary segregation, we hypothesize that size-related increases in both maximum bite force and jaw robusticity provide Hapalemur simus with an improved ability to process routinely its more obdurate diet. We demonstrate the feasibility of collecting physiological, ecological, and morphological data on the same free-ranging primates in their natural habitats. Integrating traditionally laboratory-based approaches with field studies broadens the range of potential primate species for physiological research and fosters improved tests of hypothesized feeding adaptations.     

The craniomandibular mechanics of being human

Diminished bite force has been considered a defining feature of modern Homo sapiens, an interpretation inferred from the application of two-dimensional lever mechanics and the relative gracility of the human masticatory musculature and skull. This conclusion has various implications with regard to the evolution of human feeding behaviour. However, human dental anatomy suggests a capacity to withstand high loads and two-dimensional lever models greatly simplify muscle architecture, yielding less accurate results than three-dimensional modelling using multiple lines of action. Here, to our knowledge, in the most comprehensive three-dimensional finite element analysis performed to date for any taxon, we ask whether the traditional view that the bite of H. sapiens is weak and the skull too gracile to sustain high bite forces is supported. We further introduce a new method for reconstructing incomplete fossil material. Our findings show that the human masticatory apparatus is highly efficient, capable of producing a relatively powerful bite using low muscle forces. Thus, relative to other members of the superfamily Hominoidea, humans can achieve relatively high bite forces, while overall stresses are reduced. Our findings resolve apparently discordant lines of evidence, i.e. the presence of teeth well adapted to sustain high loads within a lightweight cranium and mandible.     

A computational analysis of limb and body dimensions in Tyrannosaurus rex with implications for locomotion, ontogeny, and growth

The large theropod dinosaur Tyrannosaurus rex underwent remarkable changes during its growth from <10 kg hatchlings to >6000 kg adults in <20 years. These changes raise fascinating questions about the morphological transformations involved, peak growth rates, and scaling of limb muscle sizes as well as the body's centre of mass that could have influenced ontogenetic changes of locomotion in T. rex. Here we address these questions using three-dimensionally scanned computer models of four large, well-preserved fossil specimens as well as a putative juvenile individual. Furthermore we quantify the variations of estimated body mass, centre of mass and segment dimensions, to characterize inaccuracies in our reconstructions. These inaccuracies include not only subjectivity but also incomplete preservation and inconsistent articulations of museum skeletons. Although those problems cause ambiguity, we conclude that adult T. rex had body masses around 6000-8000 kg, with the largest known specimen ("Sue") perhaps ～9500 kg. Our results show that during T. rex ontogeny, the torso became longer and heavier whereas the limbs became proportionately shorter and lighter. Our estimates of peak growth rates are about twice as rapid as previous ones but generally support previous methods, despite biases caused by the usage of scale models and equations that underestimate body masses. We tentatively infer that the hindlimb extensor muscles masses, including the large tail muscle M. caudofemoralis longus, may have decreased in their relative size as the centre of mass shifted craniodorsally during T. rex ontogeny. Such ontogenetic changes would have worsened any relative or absolute decline of maximal locomotor performance. Regardless, T. rex probably had hip and thigh muscles relatively larger than any extant animal's. Overall, the limb "antigravity" muscles may have been as large as or even larger than those of ratite birds, which themselves have the most muscular limbs of any living animal.     

A forceful upper jaw facilitates picking-based prey capture: biomechanics of feeding in a butterflyfish,Chaetodon trichrous

Biomechanical models of feeding mechanisms elucidate how animals capture food in the wild, which, in turn, expands our understanding of their fundamental trophic niche. However, little attention has been given to modeling the protrusible upper jaw apparatus that characterizes many teleost species. We expanded existing biomechanical models to include upper jaw forces using a generalist butterflyfish, Chaetodon trichrous (Chaetodontidae) that produces substantial upper jaw protrusion when feeding on midwater and benthic prey. Laboratory feeding trials for C. trichrous were recorded using high-speed digital imaging; from these sequences we quantified feeding performance parameters to use as inputs for the biomechanical model. According to the model outputs, the upper jaw makes a substantial contribution to the overall forces produced during mouth closing in C. trichrous. Thus, biomechanical models that only consider lower jaw closing forces will underestimate total bite force for this and likely other teleost species. We also quantified and subsequently modeled feeding events for C. trichrous consuming prey from the water column versus picking attached prey from the substrate to investigate whether there is a functional trade-off between prey capture modes. We found that individuals of C. trichrous alter their feeding behavior when consuming different prey types by changing the timing and magnitude of upper and lower jaw movements and that this behavioral modification will affect the forces produced by the jaws during prey capture by dynamically altering the lever mechanics of the jaws. In fact, the slower, lower magnitude movements produced during picking-based prey capture should produce a more forceful bite, which will facilitate feeding on benthic attached prey items, such as corals. Similarities between butterflyfishes and other teleost lineages that also employ picking-based prey capture suggest that a suite of key behavioral and morphological innovations enhances feeding success for benthic attached prey items.     

Comparative lever analysis and ontogenetic scaling in esocid fishes: Functional demands and constraints in feeding biomechanics

When animals grow, the functional demands that they experience often change as a consequence of their increasing body size. In this study, we examined the feeding biomechanics in esocid species that represent different size classes (small, Esox americanus; intermediate, Esox niger; large, Esox lucius), and how their bite forces and associated functional variables change as they grow. In order to evaluate bite performance through ontogeny, we dissected and measured dimensions of the feeding apparatus and the adductor mandibulae muscle complex with its segmentum facialis subdivisions such as the ricto‐malaris, stegalis and endoricto‐malaris across a wide range of body sizes. The collected morphological data was used as input variables for a published anatomical model to simulate jaw function in these fish species. Maximum bite forces for both anterior bite and posterior bite increased in isometry in E. americanus and E. niger. The posterior bite of E. lucius also increases in isometry, however, the anterior bite increases in positive allometry. Intraspecific comparison within E. lucius indicated the increase of bite forces in more developed individuals accelerated after the fish grew out of fingerling stage. In addition, our analysis indicated functional differentiation between subdivisions of the adductor mandibulae segmentum facialis, as well as interspecific differences in the pattern of contribution to the bite performance by these subdivisions. Our study provides insights into not only the musculoskeletal basis of the jaw function of esocid species, but also the feeding capacity of this species in relation to the functional demands it faces as one of the top predators in lake and river systems. J. Morphol. 277:1447–1458, 2016. © 2016 Wiley Periodicals, Inc.     

Application of Two-spotted Spider Mite Tetranychus urticae for Plant-pest Interaction Studies

The two-spotted spider mite, Tetranychus urticae, is a ubiquitous polyphagous arthropod herbivore that feeds on a remarkably broad array of species, with more than 150 of economic value. It is a major pest of greenhouse crops, especially in Solanaceae and Cucurbitaceae (e.g., tomatoes, eggplants, peppers, cucumbers, zucchini) and greenhouse ornamentals (e.g., roses, chrysanthemum, carnations), annual field crops (such as maize, cotton, soybean, and sugar beet), and in perennial cultures (alfalfa, strawberries, grapes, citruses, and plums)^1,2. In addition to the extreme polyphagy that makes it an important agricultural pest, T. urticae has a tendency to develop resistance to a wide array of insecticides and acaricides that are used for its control^3-7.T. urticae is an excellent experimental organism, as it has a rapid life cycle (7 days at 27 °C) and can be easily maintained at high density in the laboratory. Methods to assay gene expression (including in situ hybridization and antibody staining) and to inactivate expression of spider mite endogenous genes using RNA interference have been developed^8-10. Recently, the whole genome sequence of T. urticae has been reported, creating an opportunity to develop this pest herbivore as a model organism with equivalent genomic resources that already exist in some of its host plants (Arabidopsis thaliana and the tomato Solanum lycopersicum)¹¹. Together, these model organisms could provide insights into molecular bases of plant-pest interactions.Here, an efficient method for quick and easy collection of a large number of adult female mites, their application on an experimental plant host, and the assessment of the plant damage due to spider mite feeding are described. The presented protocol enables fast and efficient collection of hundreds of individuals at any developmental stage (eggs, larvae, nymphs, adult males, and females) that can be used for subsequent experimental application.     

Scaling of feeding biomechanics in the horn shark Heterodontus francisci: ontogenetic constraints on durophagy

Organismal performance changes over ontogeny as the musculoskeletal systems underlying animal behavior grow in relative size and shape. As performance is a determinant of feeding ecology, ontogenetic changes in the former can influence the latter. The horn shark Heterodontus francisci consumes hard-shelled benthic invertebrates, which may be problematic for younger animals with lower performance capacities. Scaling of feeding biomechanics was investigated in H. francisci (n=16, 19–59 cm standard length (SL)) to determine the biomechanical basis of allometric changes in feeding performance and whether this performance capacity constrains hard-prey consumption over ontogeny. Positive allometry of anterior (8–163 N) and posterior (15–382 N) theoretical bite force was attributed to positive allometry of cross-sectional area in two jaw adducting muscles and mechanical advantage at the posterior bite point (0.79–1.26). Mechanical advantage for anterior biting scaled isometrically (0.52). Fracture forces for purple sea urchins Strongylocentrotus purpuratus consumed by H. francisci ranged from 24 to 430 N. Comparison of these fracture forces to the bite force of H. francisci suggests that H. francisci is unable to consume hard prey early in its life history, but can consume the majority of S. purpuratus by the time it reaches maximum size. Despite this constraint, positive allometry of biting performance appears to facilitate an earlier entry into the durophagous niche than would an isometric ontogenetic trajectory. The posterior gape of H. francisci is significantly smaller than the urchins capable of being crushed by its posterior bite force. Thus, the high posterior bite forces of H. francisci cannot be fully utilized while consuming prey of similar toughness and size to S. purpuratus, and its potential trophic niche is primarily determined by anterior biting capacity.     

Spatial niche partitioning in dinosaurs from the latest cretaceous (Maastrichtian) of North America

We examine patterns of occurrence of associated dinosaur specimens (n = 343) from the North American Upper Cretaceous Hell Creek Formation and equivalent beds, by comparing their relative abundance in sandstone and mudstone. Ceratopsians preferentially occur in mudstone, whereas hadrosaurs and the small ornithopod Thescelosaurus show a strong association with sandstone. By contrast, the giant carnivore Tyrannosaurus rex shows no preferred association with either lithology. These lithologies are used as an indicator of environment of deposition, with sandstone generally representing river environments, and finer grained sediments typically representing floodplain environments. Given these patterns of occurrence, we argue that spatial niche partitioning helped reduce competition for resources between the herbivorous dinosaurs. Within coastal lowlands ceratopsians preferred habitats farther away from rivers, whereas hadrosaurs and Thescelosaurus preferred habitats in close proximity to rivers, and T. rex, the ecosystem's sole large carnivore, inhabited both palaeoenvironments. Spatial partitioning of the environment helps explain how several species of large herbivorous dinosaurs coexisted. This study emphasizes that different lithologies can preserve dramatically dissimilar vertebrate assemblages, even when deposited in close proximity and within a narrow window of time. The lithology in which fossils are preserved should be recorded as these data can provide unique insights into the palaeoecology of the animals they preserve.     

The effects of biting and pulling on the forces generated during feeding in the Komodo dragon (Varanus komodoensis)

In addition to biting, it has been speculated that the forces resulting from pulling on food items may also contribute to feeding success in carnivorous vertebrates. We present an in vivo analysis of both bite and pulling forces in Varanus komodoensis, the Komodo dragon, to determine how they contribute to feeding behavior. Observations of cranial modeling and behavior suggest that V. komodoensis feeds using bite force supplemented by pulling in the caudal/ventrocaudal direction. We tested these observations using force gauges/transducers to measure biting and pulling forces. Maximum bite force correlates with both body mass and total body length, likely due to increased muscle mass. Individuals showed consistent behaviors when biting, including the typical medial-caudal head rotation. Pull force correlates best with total body length, longer limbs and larger postcranial motions. None of these forces correlated well with head dimensions. When pulling, V. komodoensis use neck and limb movements that are associated with increased caudal and ventral oriented force. Measured bite force in Varanus komodoensis is similar to several previous estimations based on 3D models, but is low for its body mass relative to other vertebrates. Pull force, especially in the ventrocaudal direction, would allow individuals to hunt and deflesh with high success without the need of strong jaw adductors. In future studies, pull forces need to be considered for a complete understanding of vertebrate carnivore feeding dynamics.