Effect of disulfide-bond introduction on the activity and stability of the extended-spectrum class A beta-lactamase Toho-1

The production of class A beta-lactamases is a major cause of clinical resistance to beta-lactam antibiotics. Some of class A beta-lactamases are known to have a disulfide bridge. Both narrow spectrum and extended spectrum beta-lactamases of TEM and the SHV enzymes possess a disulfide bond between Cys77 and Cys123, and the enzymes with carbapenem-hydrolyzing activity have a well-conserved disulfide bridge between Cys69 and Cys238. We produced A77C/G123C mutant of the extended-spectrum beta-lactamase Toho-1 in order to introduce a disulfide bond between the cysteine residues at positions 77 and 123. The result of 5,5'-dithiobis-2-nitrobenzoic acid (DTNB) titrations confirmed formation of a new disulfide bridge in the mutant. The results of irreversible heat inactivation and circular dichroism (CD) melting experiments indicated that the disulfide bridge stabilized the enzyme significantly. Though kinetic analysis indicated that the catalytic properties of the mutant were quite similar to those of the wild-type enzyme, E. coli producing this mutant showed drug resistance significantly higher than E. coli producing the wild-type enzyme. We speculate that the stability of the enzymes provided by the disulfide bond may explain the wide distribution of TEM and SHV derivatives and explain how various mutations can cause broadened substrate specificity without loss of stability.     

Active-site mutants of beta-lactamase: use of an inactive double mutant to study requirements for catalysis

We have studied the catalytic activity and some other properties of mutants of Escherichia coli plasmid-encoded RTEM beta-lactamase (EC 3.5.2.6) with all combinations of serine and threonine residues at the active-site positions 70 and 71. (All natural beta-lactamases have conserved serine-70 and threonine-71.) From the inactive double mutant Ser-70----Thr, Thr-71----Ser [Dalbadie-McFarland, G., Cohen, L. W., Riggs, A. D., Morin, C., Itakura, K., & Richards, J. H. (1982) Proc. Natl. Acad. Sci. U.S.A. 79, 6409-6413], an active revertant, Thr-71----Ser (i.e., residue 70 in the double mutant had changed from threonine to the serine conserved at position 70 in the wild-type enzyme), was isolated by an approach that allows identification of active revertants in the absence of a background of wild-type enzyme. This mutant (Thr-71----Ser) has about 15% of the catalytic activity of wild-type beta-lactamase. The other possible mutant involving serine and threonine residues at positions 70 and 71 (Ser-70----Thr) shows no catalytic activity. The primary nucleophiles of a serine or a cysteine residue [Sigal, I. S., Harwood, B. G., & Arentzen, R. (1982) Proc. Natl. Acad. Sci. U.S.A. 79, 7157-7160] at position 70 thus seem essential for enzymatic activity. Compared to wild-type enzyme, all three mutants show significantly reduced resistance to proteolysis; for the active revertant (Thr-71----Ser), we have also observed reduced thermal stability and reduced resistance to denaturation by urea.     

The isocitrate dehydrogenase kinase/phosphatase from Escherichia coli is highly sensitive to in-vitro oxidative conditions role of cysteine67 and cysteine108 in the formation of a disulfide-bonded homodimer.

Isocitrate dehydrogenase kinase/phosphatase (IDHK/P) is a homodimeric enzyme which controls the oxidative metabolism of Escherichia coli, and exibits a high intrinsic ATPase activity. When subjected to electrophoresis under nonreducing conditions, the purified enzyme migrates partially as a dimer. The proportion of the dimer over the monomer is greatly increased by treatment with cupric 1,10 phenanthrolinate or 5,5'-dithio-bis(2-nitrobenzoic acid), and fully reversed by dithiothreitol, indicating that covalent dimerization is produced by a disulfide bond. To identify the residue(s) involved in this intermolecular disulfide-bond, each of the eight cysteines of the enzyme was individually mutated into a serine. It was found that, under nonreducing conditions, the electrophoretic patterns of all corresponding mutants are identical to that of the wild-type, except for the Cys67-->Ser which migrates exclusively as a monomer and for the Cys108-->Ser which migrates preferentially as a dimer. Furthermore, in contrast to the wild-type enzyme and all the other mutants, the Cys67-->Ser mutant still migrates as a monomer after treatment with cupric 1,10 phenanthrolinate. This result indicates that the intermolecular disulfide bond involves only Cys67 in each IDHK/P wild-type monomer. This was further supported by mass spectrum analysis of the tryptic peptides derived from either the cupric 1,10 phenanthrolinate-treated wild-type enzyme or the native Cys108-->Ser mutant, which show that they both contain a Cys67-Cys67 disulfide bond. Moreover, both the cupric 1,10 phenanthrolinate-treated wild-type enzyme and the native Cys108-->Ser mutant contain another disulfide bond between Cys356 and Cys480. Previous results have shown that this additional Cys356-Cys480 disulfide bond is intramolecular [Oudot, C., Jault, J.-M., Jaquinod, M., Negre, D., Prost, J.-F., Cozzone, A.J. & Cortay, J.-C. (1998) Eur. J. Biochem. 258, 579-585].     

Introduction of a non-native disulfide bridge to human lysozyme by cysteine scanning mutagenesis

To examine whether the disulfide bridge between residues 65 and 81 can be replaced by a non-native disulfide bridge in the mutant h-lysozyme C77/95A and whether the formation of such a new disulfide bridge affects the folding of the protein, cysteine scanning mutagenesis has been performed within two discontinuous segments (residues 61-67 for the mutant C65/77/95A, and 74-84 for the mutant C77/81/95A). The position of the Cys residue at 65 or 81 was continuously shifted by site-directed mutagenesis. Of the mutants, only substitution of Cys for Trp64 allowed the secretion of mutant h-lysozyme(W64C) into the medium in a sufficient amount for analysis. After the purification, the mutant enzyme was obtained as two components (W64C-A and W64C-B). The only difference between A and B was that A had a peptide bond cleaved between Ala77 and His78. A non-native disulfide bridge between residues 64-81 was found in both components. Little difference was observed in CD spectra among wild-type and mutant enzymes. It is likely that the tertiary structure of the W64C mutant might be distorted at the location, because the directions of amino acid side chains at positions of 64 and 81 are shown to be opposite to each other in wild-type h-lysozyme by X-ray crystallographic analysis.     

Substrate specificities in class A beta-lactamases: preference for penams vs. cephems. The role of residue 237

Site saturation mutagenesis has been carried out at Ala-237 in RTEM-1 beta-lactamase to assess the role of this site in modulating differences in specificity of beta-lactamases for penams vs. cephems as substrates. (An Ala-237 Thr mutation had previously been shown to increase activity on cephems by about 30-80%.) Screening of all 19 possible mutants on penams and cephems revealed the even more active Ala-237 Asn mutant. Detailed kinetic analysis shows that this mutant has about four times the activity toward cephalothin and cephalosporin C as the wild-type enzyme. Both mutations reduce the activity toward penams to about 10% that of RTEM-1 beta-lactamase and lower by about 5 degrees C the temperature at which the enzyme denatures. Functional properties of the other mutants have also been surveyed. The most interesting aspect of these results is that two quite disparate amino acids, threonine and asparagine, when introduced for Ala-237, cause such similar changes in enzyme specificity while more similar residues do not alter the catalytic properties of the enzyme to such a significant degree.     

Enhancement of the thermal stability of pyroglutamyl peptidase I by introduction of an intersubunit disulfide bond.

From the comparison of the three-dimensional structure of mesophilic pyroglutamyl peptidase from Bacillus amyloliquefaciens and the thermophilic enzyme from Thermococcus litoralis, the intersubunit disulfide bond was estimated to be one of the factors for thermal stability. Since Ser185 was corresponded to Cys190 of the thermophilic enzyme by sequence alignment, the Ser185 residue was replaced with cysteine by site-directed mutagenesis. The S185C mutant enzyme appeared to form a disulfide bond, which was confirmed by SDS-PAGE with and without 2-mercaptoethanol. The mutant enzyme showed a catalytic efficiency equivalent to that of the wild-type enzyme for hydrolysis of a synthetic peptide substrate. However, the thermal stability of the S185C mutant was found to be 30 degrees C higher than that of wild-type. Thus the introduction of a disulfide bond enhanced thermal stability without changing the catalytic efficiency of the enzyme.     

Stabilization of Escherichia coli ribonuclease H by introduction of an artificial disulfide bond.

To examine the effect of the introduction of a disulfide bond on the stability of Escherichia coli ribonuclease H, a disulfide bond was engineered between Cys13, which is present in the wild-type enzyme, and Cys44, which is substituted for Asn44 by site-directed mutagenesis. The disulfide bond was only formed between these residues upon oxidation in vitro with redox buffer. The conformational and thermal stabilities were estimated from the guanidine hydrochloride and thermal denaturation curves, respectively. The oxidized (cross-linked) mutant enzyme showed a Tm of 62.3 degrees C, which was 11.8 degrees C higher than that observed for the wild-type enzyme. The free energy change of unfolding in the absence of denaturant, delta G[H2O], and the mid-point of the denaturation curve, [D]1/2, of the oxidized mutant enzyme were also increased by 2.1-2.8 kcal/mol and 0.36-0.48 M, respectively. Introduction of a disulfide bond thus greatly enhanced both the thermal and conformational stabilities of the enzyme. In addition, kinetic analyses for the enzymatic activities of mutant enzymes suggest that Thr43 and Asn44 are involved in the substrate-binding site of the enzyme.     

Structural and functional characterization of the mutant Escherichia coli glutaredoxin (C14----S) and its mixed disulfide with glutathione.

Glutaredoxin is essential for the glutathione (GSH)-dependent synthesis of deoxyribonucleotides by ribonucleotide reductase, and in addition, it displays a general GSH disulfide oxidoreductase activity. In Escherichia coli glutaredoxin, the active site contains a redox-active disulfide/dithiol of the sequence Cys11-Pro12-Tyr13-Cys14. In this paper, we have prepared and characterized the Cys14----Ser mutant of E. coli glutaredoxin and its mixed disulfide with glutathione. The Cys14----Ser mutant of glutaredoxin is shown to retain 38% of the GSH disulfide oxidoreductase activity of the wild-type protein with hydroxyethyl disulfide as substrate but to be completely inactive with ribonucleotide reductase, demonstrating that dithiol glutaredoxin is the hydrogen donor for ribonucleotide reductase. The covalent structure of the mixed disulfide of glutaredoxin(C14S) with GSH prepared with 15N-labeling of the protein was confirmed with nuclear magnetic resonance (NMR) spectroscopy, establishing a basis for NMR structural studies of the glutathione binding site on glutaredoxin.     

Stabilization of quaternary structure of water-soluble quinoprotein glucose dehydrogenase

Water-soluble quinoprotein glucose dehydrogease (PQQGDH-B) is a dimeric enzyme whose application for glucose sensing is the focus of much attention. We attempted to increase the thermal stability of PQQGDH-B by introducing a disulfide bond at the dimer interface. The Ser residue at position 415 was selected for substitution with Cys, as structural information revealed that its side chains face each other at the dimer interface of PQQGDH-B. PQQGDH-B with Ser415Cys showed 30-fold greater thermal stability at 55°C than did the wild-type enzyme without any decrease in catalytic activity. After incubation at 70°C for 10 min, Ser415Cys retained 90% of the GDH activity of the wild-type enzyme. Disulfide bond formation between the mutant subunits was confirmed by analyses with sodium dodecylsulfate-polyacrylamide gel electrophoresis in the presence and absence of reductants. Our results indicate that the introduction of one Cys residue in each monomer of PQQGDH-B resulted in formation of a disulfide bond at the dimer interface and thus achieved a large increase in the thermal stability of the enzyme.     

Folding of human lysozyme in vivo by the formation of an alternative disulfide bond.

The mutant h-lysozyme, W64CC65A, with Trp64 and Cys65 replaced by Cys and Ala, respectively, was secreted by yeast and purified. Peptide mapping confirmed that W64CC65A contained a nonnative Cys64-Cys81 bond and three native disulfide bonds. The mutant had 2% of the lytic activity of the wild-type lysozyme. The midpoint concentration of the guanidine hydrochloride denaturation curve, the [D]1/2, was 2.7 M for W64CC65A at pH 3.0 and 25 degrees C, whereas the [D]1/2 for the wild-type h-lysozyme was 2.9 M. These results show that the W64CC65A protein is a compactly folded molecule. Our previous results, using the mutant C81A, indicate that Cys81 is not required for correct folding and activity, whereas Cys65 is indispensable (Taniyama, Y., Yamamoto, Y., Kuroki, R., and Kikuchi, M. (1990) J. Biol. Chem. 65, 7570-7575). Cys64 substituted for Cys65 in W64CC65A, even though the distance between the alpha-carbons at positions 64 and 81 in the wild-type h-lysozyme is not favorable for forming a disulfide bond. Unlike C81A, the mutant W64CC65/81A, which has the additional substitution of Ala for Cys81, did not fold. These results suggest that the absence of both the Cys64-Cys81 bond and the amino acid residue Trp64 caused the misfolding or destabilization of W64CC65/81A in vivo. It is proposed that the formation of the alternative bond, Cys64-Cys81 is important for the folding of W64CC65A in vivo.     

Mutations affecting the catalytic activity of Bacillus cereus 5/B/6 beta-lactamase II

Random in vitro mutagenesis of a cloned Bacillus cereus 5/B/6 beta-lactamase II gene was used to select defective genes unable to confer ampicillin or cephalosporin C resistance to Escherichia coli. DNA sequencing of mutant genes identified histidine at position 28 as important to beta-lactamase II function. In addition, the isolation of six identical frameshift mutants established that the carboxyl-terminal end of beta-lactamase II is critical for enzyme function. Random mutagenesis also revealed that His88 (implicated previously as one of 4 residues acting as a zinc ligand) is crucial to enzymatic activity and that a glycine to glutamic acid substitution at position 148 produced a defective beta-lactamase. Oligonucleotide mutagenesis directed at Glu37 and Glu212 suggests that these residues are inconsequential to enzyme function but that histidine at position 28 may be involved in substrate binding or recognition.     

Role of disulphide bonds in a thermophilic serine protease aqualysin I from Thermus aquaticus YT-1

A thermophilic serine protease, Aqualysin I, from Thermus aquaticus YT-1 has two disulphide bonds, which are also found in a psychrophilic serine protease from Vibrio sp. PA-44 and a proteinase K-like enzyme from Serratia sp. at corresponding positions. To understand the significance of these disulphide bonds in aqualysin I, we prepared mutants C99S, C194S and C99S/C194S (WSS), in which Cys69-Cys99, Cys163-Cys194 and both of these disulphide bonds, respectively, were disrupted by replacing Cys residues with Ser residues. All mutants were expressed stably in Escherichia coli. The C99S mutant was 68% as active as the wild-type enzyme at 40 degrees C in terms of k(cat) value, while C194S and WSS were only 6 and 3%, respectively, as active, indicating that disulphide bond Cys163-Cys194 is critically important for maintaining proper catalytic site conformation. Mutants C194S and WSS were less thermostable than wild-type enzyme, with a half-life at 90 degrees C of 10 min as compared to 45 min of the latter and with transition temperatures on differential scanning calorimetry of 86.7 degrees C and 86.9 degrees C, respectively. Mutant C99S was almost as stable as the wild-type aqualysin I. These results indicate that the disulphide bond Cys163-Cys194 is more important for catalytic activity and conformational stability of aqualysin I than Cys67-Cys99.     

Enhancement of the thermostability of subtilisin E by introduction of a disulfide bond engineered on the basis of structural comparison with a thermophilic serine protease

Sites for Cys substitutions to form a disulfide bond were chosen in subtilisin E from Bacillus subtilis, a cysteine-free bacterial serine protease, based on the structure of aqualysin I of Thermus aquaticus YT-1 (a thermophilic subtilisin-type protease containing two disulfide bonds). Cys residues were introduced at positions 61 (wild-type, Gly) and 98 (Ser) in subtilisin E by site-directed mutagenesis. The Cys-61/Cys-98 mutant subtilisin appeared to form a disulfide bond spontaneously in the expression system used and showed a catalytic efficiency equivalent to that of the wild-type enzyme for hydrolysis of a synthetic peptide substrate. The thermodynamic characteristics of these enzymes were examined in terms of enzyme autolysis (t1/2) and thermal stability (Tm). The half-life of the Cys-61/Cys-98 mutant was found to be 2-3 times longer than that of the wild-type enzyme. Similar results were obtained by differential scanning calorimetry. The disulfide mutant showed a Tm of 63.0 degrees C, which was 4.5 degrees C higher than that observed for the wild-type enzyme. Under reducing conditions, however, the characteristics of the mutant enzyme were found to revert to those of the wild-type enzyme. These results strongly suggest that the introduction of a disulfide bond by site-directed mutagenesis enhanced the thermostability of subtilisin E without changing the catalytic efficiency of the enzyme.     

Folding mechanism of mutant human lysozyme C77/95A with increased secretion efficiency in yeast.

A mutant human lysozyme C77/95A, in which Cys77 and Cys95 are replaced with alanine, has been characterized by 8-fold greater secretion in yeast (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967) and almost the same three-dimensional structure as wild-type human lysozyme (Inaka, K., Taniyama, Y., Kikuchi, M., Morikawa, K., and Matsushima, M. (1991) J. Biol. Chem. 266, 12599-12603). To clarify the molecular features of C77/95A and the reason for its increased secretion in yeast, the stabilities of the mutant C77/95A and the wild-type proteins were examined by guanidine hydrochloride denaturation, and the unfolding-refolding kinetics were determined from circular dichroism and fluorescence stopped-flow measurements. Equilibrium experiments showed that the delta G of unfolding of C77/95A in water was 5.8 kcal/mol less stable than that of the wild-type protein at pH 4.0 and 10 degrees C. The unfolding rate of C77/95A was 4 orders of magnitude faster than that of the wild-type protein whereas the two proteins shared similar refolding rates. The slowly refolding phase of the wild-type protein disappeared in C77/95A, indicating that the disulfide bond affects this phase. These observations show that the disulfide bond Cys77-Cys95 contributes to the stabilization of the folded form of human lysozyme by suppressing the unfolding rate and that the increase in the unfolding rate, or the disappearance of the slowly refolding phase in vitro, could correlate with the increase in secretion efficiency in vivo.     

In vivo formation and stability of engineered disulfide bonds in subtilisin

Computer modeling suggested that a disulfide bond could be built into Bacillus amyloliquefaciens subtilisin between positions 22 (wild-type, Thr) and 87 (Ser) or between positions 24 (Ser) and 87 (Ser). Single cysteines were introduced into this cysteine-free protease at positions 22, 24, or 87 by site-directed mutagenesis of the cloned subtilisin gene. The corresponding double-cysteine mutants were constructed, and recombinant plasmids were expressed in Bacillus subtilis. Double-cysteine mutant enzymes were secreted as efficiently as wild-type, and disulfide bonds were formed quantitatively in vivo. These disulfide bonds were introduced approximately 24 A away from the catalytic site and had no detectable effect on either the specific activities or the pH optima of the mutant enzymes. The equilibrium constants for the reduction of the mutant disulfide bonds by dithiothreitol were determined to be 82 +/- 22 and 20 +/- 5 for Cys22/Cys87 and Cys24/Cys87, respectively. Studies of autoproteolytic inactivation of wild-type subtilisin support a relationship between autolytic stability and conformational stability of the protein. The stabilities of Cys24/Cys87 and wild-type enzymes to autolysis were essentially the same; however, Cys22/Cys87 was actually less stable to autolysis. Reduction of the disulfide cross-bridge lowered the autolytic stability of both double-cysteine mutants relative to their disulfide forms. This correlates with a lowered autolytic stability for the Cys22 and Cys87 single-cysteine mutants, and the fact that an intramolecular hydrogen bond between the hydroxyl groups of Thr22 and Ser87 is likely to be disrupted in the Cys22 and Cys87 single-cysteine mutant proteins.     

Evidence for difference in the roles of two cysteine residues involved in disulfide bond formation in the folding of human lysozyme

Human lysozyme is made up of 130 amino acid residues and has four disulfide bonds at Cys6-Cys128, Cys30-Cys116, Cys65-Cys81, and Cys77-Cys95. Our previous results using the Saccharomyces cerevisiae secretion system indicate that the individual disulfide bonds of human lysozyme have different functions in the correct in vivo folding and enzymatic activity of the protein (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). In this paper, we report the results of experiments that were focused on the roles of Cys65 and Cys81 in the folding of human lysozyme protein in yeast. A mutant protein (C81A), in which Cys81 was replaced with Ala, had almost the same enzymatic activity and conformation as those of the native enzyme. On the other hand, another mutant (C65A), in which Cys65 was replaced with Ala, was not found to fold correctly. These results indicate that Cys81 is not a requisite for both correct folding and activity, whereas Cys65 is indispensable. The mutant protein C81A is seen to contain a new, non-native disulfide bond at Cys65-Cys77. The possible occurrence of disulfide bond interchange during our mapping experiments cannot be ruled out by the experimental techniques presently available, but characterization of other mutant proteins and computer analysis suggest that the intramolecular exchange of disulfide bonds is present in the folding pathway of human lysozyme in vivo.     

A free cysteine residue at the dimer interface decreases conformational stability of Xenopus laevis copper,zinc superoxide dismutase

The two Cu,Zn superoxide dismutases from the amphibian Xenopus laevis (denoted XSODA and XSODB) display different heat sensitivities, XSODA being more thermolabile than XSODB. In this study, we have investigated the contribution of a free cysteine residue located close to the subunit interface of XSODA to its lower thermal stability. We have found that mutation of residue Cys 150 to Ala in XSODA makes the thermal stability of this enzyme comparable to that of the wild-type XSODB isoenzyme, while the introduction of a cysteine residue in the same position of XSODB renders this enzyme variant much more heat-sensitive. Differential scanning calorimetry experiments showed that XSODA has a melting temperature about 8.5 degrees C lower than that of XSODB. On the contrary, the melting temperature of XSODACys150Ala is very close to that of XSODB, while the melting temperature of XSODBSer150Cys is even lower than that of wild-type XSODA. These data indicate that the free cysteine residue present in XSODA affects not only the reversibility of unfolding of the enzyme but also its conformational stability. We suggest that the large effect of the Cys 150 residue on XSODA stability might be due to incorrect disulfide bond formation or disulfide bond interchange during heat-induced unfolding rather than to alteration of the interaction between the enzyme subunits.     

Folding in vitro and transport in vivo of pre-β-lactamase are SecB independent

The rate of folding of the precursor of beta-lactamase is not influenced by the presence of SecB under conditions in which GroEL/ES retards the folding. Wild-type beta-lactamase and several mutants in the signal or the mature protein, affecting either transport or enzyme kinetics and probably folding, were examined for total expression, total enzymatic activity, and transported beta-lactamase (in vivo resistance) in secB- and secB+ strains. We conclude that there is no indication of any relevant interaction between SecB and pre-beta-lactamase in vitro, nor did the secB- mutation affect the transport of wild-type beta-lactamase or any of the mutant in vivo. Thus, putative Escherichia coli "folding modulators' must be of limited specificity.     

Evidence for intramolecular disulfide bond shuffling in the folding of mutant human lysozyme

Our previous results using the Saccharomyces cerevisiae secretion system suggest that intramolecular exchange of disulfide bonds occurs in the folding pathway of human lysozyme in vivo (Taniyama, Y., Yamamoto, Y., Kuroki, R., and Kikuchi, M. (1990) J. Biol. Chem. 265, 7570-7575). Here we report on the results of introducing an artificial disulfide bond in mutants with 2 cysteine residues substituting for Ala83 and Asp91. The mutant (C83/91) protein was not detected in the culture medium of the yeast, probably because of incorrect folding. Thereupon, 2 cysteine residues Cys77 and Cys95 were replaced with Ala in the mutant C83/91, because a native disulfide bond Cys77-Cys95 was found not necessary for correct folding in vivo (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). The resultant mutant (AC83/91) was secreted as two proteins (AC83/91-a and AC83/91-b) with different specific activities. Amino acid and peptide mapping analyses showed that two glutathiones appeared to be attached to the thiol groups of the cysteine residues introduced into AC83/91-a and that four disulfide bonds including an artificial disulfide bond existed in the AC83/91-b molecule. The presence of cysteine residues modified with glutathione may indicate that the non-native disulfide bond Cys83-Cys91 is not so easily formed as a native disulfide bond. These results suggest that the introduction of Cys83 and Cys91 may act to suppress the process of native disulfide bond formation through disulfide bond interchange in the folding of human lysozyme.     

An engineered disulfide bond between residues 69 and 238 in extended-spectrum beta-lactamase Toho-1 reduces its activity toward third-generation cephalosporins

Previous crystallographic structural analysis of extended-spectrum beta-lactamase Toho-1 predicted that the high flexibility of beta-strand B3, the region that contains a conserved KTG motif and forms one wall of the substrate-binding site, could be one of the key features contributing to Toho-1 activity toward third-generation cephalosporins. To investigate whether this possible flexibility really affects the substrate profile of this enzyme, two Toho-1 mutants have been produced, G238C and G238C/G239in, in which the glycine residue at position 238 was replaced with a cysteine and an additional glycine residue was inserted. Our intent was to introduce a disulfide bond between the cysteine residues at positions 69 and 238, and thus to lock the position of beta-strand B3. The results of 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) titration indicated formation of a new disulfide bridge in the G238C mutant, although disulfide bond formation was not confirmed in the G238C/G239in mutant. Kinetic analysis showed that the activity of the G238C mutant decreased drastically against third-generation cephalosporins, while its catalytic efficiency against penicillins and first-generation cephalosporins was almost identical to that of the wild-type enzyme. This result was consistent with the prediction that flexibility in beta-strand B3 was critical for activity against third-generation cephalosporins in Toho-1. Furthermore, we have determined the crystal structure of the G238C mutant enzyme to analyze the structural changes in detail. The structural model clearly shows the introduction of a new disulfide bridge and that there is no appreciable difference between the overall structures of the wild-type enzyme and the G238C mutant, although the introduced disulfide bond slightly influenced the positions of Ser237 on beta-strand B3 and Asn170 on the Omega loop. The results of our kinetic and structural analyses suggest that the flexibility of beta-strand B3, as well as the positions of Ser237 and the Omega loop, is critical for the substrate specificity expansion of Toho-1.