Poly-β-hydroxybutyrate/ectoine co-production by ectoine-excreting strain Halomonas salina

The ectoine-excreting bacterial strain of Halomonas salina was employed in the co-production of poly-β-hydroxybutyrate (PHB) and ectoine (Ect) during a fermentation process (PHB/Ect co-production). An efficient PHB/Ect co-production process was carried out at low NaCl concentration (30 g L⁻¹). It was established using ¹H Nuclear Magnetic Resonance spectroscopy that H. salina produces PHB. The effects of the NaCl concentration, the initial C/N ratio, the phosphate concentration and mixed carbon sources were investigated with respect to PHB/Ect co-production. The PHB/Ect co-production system comprised growing and non-growing cell phases and was developed with NaCl concentration of 30 g L⁻¹. The optimal conditions for PHB/Ect co-production by the ectoine-excreting strain of H. salina were 30 g L⁻¹ NaCl, with an initial C/N ratio of 15, an initial phosphate concentration of 12 g L⁻¹ and mixed carbon sources of 55 g L⁻¹ glucose and 25 g L⁻¹ monosodium glutamate. Using a PHB/Ect co-production system with growing and non-growing cell phases prevents the inhibition of PHB synthesis by high concentration of NaCl and significantly reduces ectoine degradation. PHB and ectoine concentrations as high as 35.3 g L⁻¹ and 8.6 g L⁻¹, respectively, were achieved. The efficient co-production of PHB and ectoine at a low NaCl concentration has been realised.     

Volatile fatty acids accumulation and rhamnolipid generation in situ from waste activated sludge fermentation stimulated by external rhamnolipid addition

The solubilization and acidification of waste activated sludge (WAS) were apparently enhanced by external rhamnolipid (RL) addition. The maximum solute carbohydrate concentrations increased linearly from 48 ± 5 mg COD L⁻¹ in the un-pretreated WAS (blank) to 566 ± 19 mg COD L⁻¹, and protein increased from 1050 ± 8 to 3493 ± 16 mg COD L⁻¹ at RL dosage of 0.10 g g⁻¹ TSS. The highest VFAs concentration peaked at 3840 mg COD L⁻¹ at RL dosage of 0.04 g g⁻¹ TSS, which was 4.24-fold higher than the blank test. RL was generated in situ during WAS fermentation when external RL was added. It was detected that RL concentration was increased from initial 880 ± 92 mg L⁻¹ to 1312 ± 7 mg L⁻¹ at the end of 96 h with RL dosage of 0.04 g g⁻¹ TSS, which was increased to 1.49-fold. Meanwhile, methane production was notably reduced to a quite low level of 2.0 mL CH₄ g⁻¹ VSS, showing effective inhibition of methanogens by RL (58.8 mL CH₄ g⁻¹ VSS in the blank). In addition, the activity of hydrolytic enzymes (protease and α-glucosidase) was enhanced accordingly. VFAs accumulation and RL generation in situ demonstrated that the additional RL substantially performed enhanced biological effects for waste activated sludge fermentation.     

d- and l-lactic acid production from fresh sweet potato through simultaneous saccharification and fermentation

The aim of this study was to develop a bioprocess for l- and d-lactic acid production from raw sweet potato through simultaneous saccharification and fermentation by Lactobacillus paracasei and Lactobacillus coryniformis, respectively. The effects of enzyme and nitrogen source concentrations as well as of the ratio of raw material to medium were investigated. At dried material concentrations of 136.36–219.51 g L⁻¹, yields of 90.13–91.17% (w/w) and productivities of 3.41–3.83 g L⁻¹ h⁻¹ were obtained with lactic acid concentrations as high as 198.32 g L⁻¹ for l-lactic acid production. In addition, d-lactic acid was produced with yields of 90.11–84.92% (w/w) and productivities of 2.55–3.11 g L⁻¹ h⁻¹ with a maximum concentration of 186.40 g L⁻¹ at the same concentrations of dried material. The simple and efficient process described in this study will benefit the tuber and root-based lactic acid industries without requiring alterations in plant equipment.     

Simultaneous saccharification and fermentation of kraft pulp by recombinant Escherichia coli for phenyllactic acid production

Simultaneous saccharification and fermentation (SSF) of renewable cellulose for the production of 3-phenyllactic acid (PhLA) by recombinant Escherichia coli was investigated. Kraft pulp recovered from biomass fractionation processes was used as a model cellulosic feedstock and was hydrolyzed using 10–50 filter paper unit (FPU) g⁻¹ kraft pulp of a commercial cellulase mixture, which increased the glucose yield from 21% to 72% in an enzyme dose-dependent manner. PhLA fermentation of the hydrolyzed kraft pulp by a recombinant E. coli strain expressing phenylpyruvate reductase from Wickerhamia fluorescens TK1 produced 1.9 mM PhLA. The PhLA yield obtained using separate hydrolysis and fermentation was enhanced from 5.8% to 42% by process integration into SSF of kraft pulp (20 g L⁻¹) in a complex medium (pH 7.0) at 37 °C. The PhLA yield was negatively correlated with the initial glucose concentration, with a five-fold higher PhLA yield observed in culture medium containing 10 g L⁻¹ glucose compared to 100 g L⁻¹. Taken together, these results suggest that the PhLA yield from cellulose in kraft pulp can be improved by SSF under glucose-limited conditions.     

Treatment of acidic wastewater arising from the refining of vegetable oil by crossflow microfiltration at very low transmembrane pressure

The refining process of vegetable oils generates acidic wastewater with the following characteristics: pH (1–1.5), COD (10–30 g O₂ L⁻¹), suspended solids (7–12 g L⁻¹) and fats (2–4 g L⁻¹). In order to reduce the effluent load and recover a fraction of the fats without using any additives, a microfiltration (0.2–1.4 μm) process involving ceramic membranes at very low transmembrane pressure values (0.1–1 bar) was assessed. Four batches of acidic wastewater from different manufacturing runs were tested. Trials with a constant volumetric reduction ratio of 30 were carried out for periods of more than 5 h. With a 0.5 μm membrane it was possible to maintain a permeate flux of 100 L h⁻¹ m⁻² for 24 h and achieve a 91% reduction in SS, a 96% reduction in fat and a COD reduction of more than 60%. In addition, the retentate thus extracted separated spontaneously into two phases, both of which could be exploited: the upper phase mainly consisting of fats as a by-product and the lower clarified phase which could be mixed into the permeate.     

Valorization of olive stones for xylitol and ethanol production from dilute acid pretreatment via enzymatic hydrolysis and fermentation by Pachysolen tannophilus

Olive stones are an agro-industrial by-product abundant in the Mediterranean area that is regarded as a potential lignocellulosic feedstock for sugar production. Statistical modeling of dilute-sulphuric acid hydrolysis of olive stones has been performed using a response surface methodology, with treatment temperature and process time as factors, to optimize the hydrolysis conditions aiming to attain maximum d-xylose extraction from hemicelluloses. Thus, solid yield and composition of solid and liquid phases were assessed by empirical modeling. The highest yield of d-xylose was found at a temperature of 195 °C for 5 min. Under these conditions, 89.7% of the total d-xylose was recovered from raw material. The resulting solids from optimal conditions were assayed as substrate for enzymatic hydrolysis, while fermentability of hemicellulosic hydrolysates was tested using the d-xylose-fermenting yeast Pachysolen tannophilus. Both bioprocesses were considerably influenced by enzyme loading and inoculum size. In the enzymatic hydrolysis step, about 56% of cellulose was converted into d-glucose by using an enzyme/solid ratio of 40 FPU g⁻¹, while in the fermentation carried out with a cell concentration of 2 g L⁻¹ a yield of 0.44 g xylitol/g d-xylose and a global volumetric productivity of 0.11 g L⁻¹ h⁻¹ were achieved.     

A new bioprocess for the production of prebiotic lactosucrose by an immobilized β-galactosidase

A new bioprocess for the synthesis of lactosucrose was studied using a covalently immobilized β-galactosidase on macrospheres of chitosan. The effects of temperature and pH on the production of lactosucrose and other oligosaccharides were evaluated. At 30 °C and pH 7.0, the maximum concentration of lactosucrose reached to 79 g L⁻¹. The change of the reaction conditions allowed to modify the qualitative profile of the final products without quantitative change in the total of oligosaccharides produced. At pH 7 and 30 °C, products profile was 79 g L⁻¹ of lactosucrose, 37 g L⁻¹ of galactooligosaccharides and 250 g L⁻¹ of total oligosaccharides, while at pH 5 and 64 °C the concentrations for the same compounds were 40, 62 and 250 g L⁻¹, respectively. The immobilization increased the thermal stability up to 260-fold. Using 300 g L⁻¹ of sucrose and 300 g L⁻¹ of lactose, and 8.5 mg of chitosan mL⁻¹, 30 cycles of reuse were performed and the biocatalyst kept the maximal lactosucrose synthesis. These results fulfill some important aspects for the enzyme immobilization and oligosaccharides synthesis: the simplicity of the protocols, the high operational stability of the enzyme and the possibility of driving the final products.     

Continuous succinic acid fermentation by Actinobacillus succinogenes

Fermentations were performed in an external recycle bioreactor using CO₂ and d-glucose at feed concentrations of 20 and 40 g L⁻¹. Severe biofilm formation prevented kinetic analysis of suspended cell (‘chemostat’) fermentation, while perlite packing enhanced the volumetric productivity by increasing the amount of immobilised cells. The highest productivity of 6.35 g L⁻¹ h⁻¹ was achieved at a dilution rate of 0.56 h⁻¹. A constant succinic acid yield of 0.69 ± 0.02 g/(g of glucose consumed) was obtained and found to be independent of the dilution rate, transient state and extent of biofilm build-up – approximately 56% of the carbon that formed phosphoenolpyruvate ended up as succinate. Byproduct analysis indicated that pyruvate oxidation proceeded solely via the formate-lyase pathway. Cell growth and corresponding biofilm formation were rapid at dilution rates higher than 0.35 h⁻¹ when the product concentrations were low (succinic acid < 10 g L⁻¹), while minimal growth was observed at succinic acid concentrations above this threshold.     

Over expression of GroESL in Cupriavidus necator for heterotrophic and autotrophic isopropanol production

We previously reported a metabolic engineering strategy to develop an isopropanol producing strain of Cupriavidus necator leading to production of 3.4 g L⁻¹ isopropanol. In order to reach higher titers, isopropanol toxicity to the cells has to be considered. A toxic effect of isopropanol on the growth of C. necator has been indeed observed above a critical value of 15 g L⁻¹. GroESL chaperones were first searched and identified in the genome of C. necator. Native groEL and groES genes from C. necator were over-expressed in a strain deleted for PHA synthesis. We demonstrated that over-expressing groESL genes led to a better tolerance of the strain towards exogenous isopropanol. GroESL genes were then over-expressed within the best engineered isopropanol producing strain. A final isopropanol concentration of 9.8 g L⁻¹ was achieved in fed-batch culture on fructose as the sole carbon source (equivalent to 16 g L⁻¹ after taking into account evaporation). Cell viability was slightly improved by the chaperone over-expression, particularly at the end of the fermentation when the isopropanol concentration was the highest. Moreover, the strain over-expressing the chaperones showed higher enzyme activity levels of the 2 heterologous enzymes (acetoacetate carboxylase and alcohol dehydrogenase) of the isopropanol synthetic operon, translating to a higher specific production rate of isopropanol at the expense of the specific production rate of acetone. Over-expressing the native chaperones led to a 9–18% increase in the isopropanol yield on fructose.     

High production of poly-β-hydroxybutyrate (PHB) by an Azotobacter vinelandii mutant altered in PHB regulation using a fed-batch fermentation process

A mixed fermentation strategy based on exponentially fed-batch cultures (EFBC) and nutrient pulses with sucrose and yeast extract was developed to achieve a high concentration of PHB by Azotobacter vinelandii OPNA, which carries a mutation on the regulatory systems PTSNtr and RsmA-RsmZ/Y, that negatively regulate the synthesis of PHB. Culture of the OPNA strain in shake flaks containing PY-sucrose medium significantly improved growth and PHB production with respect to the results obtained from the cultures with the parental strain (OP). When the OPNA strain was cultured in a batch fermentation keeping constant the DOT at 4%, the maximal growth rate (0.16 h⁻¹) and PHB yield (0.30 g_PHB g_Suc⁻¹) were reached. Later, in EFBC, the OPNA strain increased three fold the biomass and 2.2 fold the PHB concentration in relation to the values obtained from the batch cultures. Finally, using a strategy of exponential feeding coupled with nutrient pulses (with sucrose and yeast extract) the production of PHB increased 7-fold to reach a maximal PHB concentration of 27.3 ± 3.2 g L⁻¹ at 60 h of fermentation. Overall, the use of the mutant of A. vinelandii OPNA, impaired in the PHB regulatory systems, in combination with a mixed fermentation strategy could be a feasible strategy to optimize the PHB production at industrial level.     

Improving the lactic acid production of Actinobacillus succinogenes by using a novel fermentation and separation integration system

This work describes the development of a novel integrated system for lactic acid production by Actinobacillus succinogenes. Fermentation and separation were integrated with the use of a microfiltration (MF) membrane, and lactic acid was recovered by resin adsorption following MF. The fermentation broth containing residual sugar and nutrients was then recycled back into the fermenter after lactic acid adsorption. This novel approach overcame the problem of product inhibition and extended the cell growth period from 41 h to 120 h. Production of lactic acid was improved by 23% to 183.4 g L⁻¹. The overall yield and productivity for glucose were 0.97 g g⁻¹ and 1.53 g L⁻¹ h⁻¹, respectively. These experimental results indicate that the integrated system could benefit continuous production of lactic acid at high levels.     

Enhanced production of valienamine by Stenotrophomonas maltrophilia with fed-batch culture in a stirred tank bioreactor

Valienamine is an important medicinal intermediate with broad use in the synthesis of some stronger α-glucosidase inhibitors. In order to improve valienamine concentration in the fermentation broth and make the downstream treatment easy, a fed-batch process for the enhanced production of valienamine by Stenotrophomonas maltrophilia in a stirred tank bioreactor was developed. Results showed that supplementation of validamycin A in the process of cultivation could increase the valienamine concentration. One-pulse feeding was observed to be the best strategy. The maximum valienamine concentration of 2.35 g L⁻¹ was obtained at 156 h when 86.4 g of validamycin A was added to a 15-L bioreactor containing 8 L fermentation medium with one-pulse feeding. The maximum valienamine concentration had a great improvement and was increased above 100% compared to batch fermentation in the stirred tank bioreactor. The pH-controlled experiments showed that controlling the pH in the process of one-pulse feeding fermentation had not obvious effect on the production of valienamine.     

Fed-batch fermentation of recombinant Citrobacter freundii with expression of a violacein-synthesizing gene cluster for efficient violacein production from glycerol

The extensive prospects of violacein in the pharmaceutical industry have attracted increasing interest. However, the fermentation levels of violacein are currently inadequate to meet the demands of industrial production. This study was undertaken to develop an efficient process for the production of violacein by recombinant Citrobacter freundii. The effects of dissolved oxygen (DO) and pH on cell growth and violacein production in batch cultures were investigated first. When the DO and pH of the medium were controlled at around 25% and 7.0, respectively, the biomass and concentration of violacein were maximized. Based on the consumption of nutrients in the medium observed during batch culture, a fed-batch fermentation strategy with controlled DO and pH was implemented. By continuously feeding glycerol, NH₄Cl, and l-tryptophan at a constant feeding rate of 16 mL h⁻¹, the final concentration of violacein reached 4.13 g L⁻¹, which was 4.09-fold higher than the corresponding batch culture, and the maximal dry cell weight (DCW) and average violacein productivity obtained for the fed-batch culture were 3.34 g DCW L⁻¹ and 82.6 mg L⁻¹ h⁻¹, respectively. To date, this is the first report on the efficient production of violacein by genetically engineered strains in a fermentor.     

Comparison of salinity tolerance of three Atriplex spp. in well-watered and drying soils

Members of the Chenopodiaceae are well adapted to both salt and drought stress and can serve as model species to understand the mechanisms of tolerance in plants. We grew Atriplex hortensis (ATHO), A. canescens (ATCA), and A. lentiformis (ATLE) along a NaCL salinity gradient under non-water-limited conditions and in drying soils in greenhouse experiments. The species differed in photosynthetic carbon fixation pathway, capacity for sodium uptake, and habitat preferences. Under non-water-limited conditions, ATLE (C4) maintained high growth rates up to 30 g L⁻¹ NaCl. ATHO (C3) had lower growth than ATLE at high salinities, while ATCA (C4) grew more slowly than either ATLE or ATHO and showed no net growth above 20 g L⁻¹ NaCl. ATHO and ATLE accumulated twice as much sodium in their shoots as ATCA, but all three species had increasing sodium levels at higher salinities. Potassium, magnesium and calcium levels were relatively constant over the salinity gradient. All three species showed marked accumulation of chloride across the salinity gradient, whereas nitrate, phosphorous and sulfate decreased with salinity. The effect of drought was simulated by growing plants in sealed pots with an initial charge of water plus NaCl, and allowing them to grow to the end point at which they no longer were able to extract water from the soil solution. Drought and salinity were not additive stress factors for Atriplex spp. in this experiment. NaCl increased their ability to extract water from the soil solution compared to fresh water controls. ATLE showed increased shoot dry matter production and increased water use efficiency (WUE) as initial salinity levels increased from 0 to 30 g L⁻¹ NaCl, whereas dry matter production and WUE peaked at 5 g L⁻¹ for ATHO and ATCA. Final soil moisture salinities tolerated by species were 85 g L⁻¹, 55 g L⁻¹ and 160 g L⁻¹ NaCl for ATHO, ATCA and ATLE, respectively. C4 photosynthesis and sodium accumulation in shoots were associated with high drought and salt tolerance.     

Succinic acid production from sucrose and molasses by metabolically engineered E. coli using a cell surface display system

To achieve sucrose-metabolizing capability, different sucrose utilization operons have been introduced into E. coli that cannot utilize sucrose. However, these engineered strains still suffer from low growth rates and low sucrose uptake rates. In this study, cell surface display system was adopted in engineered E. coli AFP111 for succinic acid production from sucrose and molasses directly. Invertase (CscA) from E. coli W was successfully anchored to outer membrane by fusion with OmpC anchoring motif, and the displayed CscA showed high extracellular activity. Compared with the sucrose permease system, the cell surface display system consumed less ATP during sucrose metabolism. When less ATP was consumed by AFP111/pTrcC-cscA, the succinic acid productivity from sucrose was 23% higher than that by AFP111/pCR2.1-cscBKA that having the sucrose permease system. As a result, 41 g L⁻¹ and 36.3 g L⁻¹ succinic acid were produced by AFP111/pTrcC-cscA from sucrose and sugarcane molasses respectively at 34 h in 3-L fermentor during dual-phase fermentation. In addition, 79 g L⁻¹ succinic acid was accumulated with recovered AFP111/pTrcC-cscA cells at the end of dual-phase fermentation in 3-L fermentor, and the overall yield was 1.19 mol mol⁻¹ hexose.     

Continuous succinic acid production by Actinobacillus succinogenes in a biofilm reactor: Steady-state metabolic flux variation

Continuous anaerobic fermentations were performed in a novel external-recycle, biofilm reactor using d-glucose and CO₂ as carbon substrates. Succinic acid (SA) yields were found to be an increasing function of glucose consumption with the succinic acid to acetic acid ratio increasing from 2.4 g g⁻¹ at a glucose consumption of 10 g L⁻¹, to 5.7 g g⁻¹ at a glucose consumption of 50 g L⁻¹. The formic acid to acetic acid ratio decreased from an equimolar value (0.77 g g⁻¹) at a glucose consumption of 10 g L⁻¹ to a value close to zero at 50 g L⁻¹. The highest SA yield on glucose and highest SA titre obtained were 0.91 g g⁻¹ and 48.5 g L⁻¹ respectively. Metabolic flux analysis based on the established C₃ and C₄ metabolic pathways of Actinobacillus succinogenes revealed that the increase in the succinate to acetate ratio could not be attributed to the decrease in formic acid and that an additional source of NADH was present. The fraction of unaccounted NADH increased with glucose consumption, suggesting that additional reducing power is present in the medium or is provided by the activation of an alternative metabolic pathway.     

Enzymatic hydrolysis of corncob and ethanol production from cellulosic hydrolysate

 Enzymatic hydrolysis of corncob and ethanol fermentation from cellulosic hydrolysate were investigated. After corncob was pretreated by 1% H₂SO₄ at 108 °C for 3 h, the cellulosic residue was hydrolyzed by cellulase from Trichoderma reesei ZU-02 and the hydrolysis yield was 67.5%. Poor cellobiase activity in T. reesei cellulase restricted the conversion of cellobiose to glucose, and the accumulation of cellobiose caused severe feedback inhibition to the activities of β-1,4-endoglucanase and β-1,4-exoglucanase in cellulase system. Supplementing cellobiase from Aspergillus niger ZU-07 greatly reduced the inhibitory effect caused by cellobiose, and the hydrolysis yield was improved to 83.9% with enhanced cellobiase activity of 6.5 CBU g⁻¹ substrate. Fed-batch hydrolysis process was started with a batch hydrolysis containing 100 g l⁻¹ substrate, with cellulosic residue added at 6 and 12 h twice to get a final substrate concentration of 200 g l⁻¹. After 60 h of reaction, the reducing sugar concentration reached 116.3 g l⁻¹ with a hydrolysis yield of 79.5%. Further fermentation of cellulosic hydrolysate containing 95.3 g l⁻¹ glucose was performed using Saccharomyces cerevisiae 316, and 45.7 g l⁻¹ ethanol was obtained within 18 h. The research results are meaningful in fuel ethanol production from agricultural residue instead of grain starch.     

Improvement in natamycin production by Streptomyces natalensis with the addition of short-chain carboxylic acids

Natamycin is an important tetraene (polyene) antibiotic produced in submerged culture by different strains of Streptomyces sp. In the present work, the effects of the addition of short-chain carboxylic acids (acetic, propionic and butyric) on cell growth and the kinetics of natamycin production were investigated during submerged cultivation of Streptomyces natalensis. The addition of acetic and propionic acids showed stimulatory effects on natamycin production when added to the fermentation medium at concentrations below 2 g L^?1 at the beginning of cultivation. In addition, when acetic and propionic acids were added in a mixture (7:1) at a total concentration of 2 g L^?1, antibiotic production increased significantly, reaching 3.0 g L^?1 (approximately 223% and 250% increases in volumetric and specific antibiotic production, respectively, compared with the control culture). Moreover, the addition of carboxylic acids not only increased the antibiotic yield but also decreased the production time from 96 h to only 84 h in shake-flask cultures. A further enhancement in natamycin production was achieved by cultivation in a 2-L stirred-tank bioreactor under controlled pH conditions. The maximum volumetric production of 3.98 g L^?1 was achieved after 84 h in carboxylic acid-supplemented culture (acetate and propionate in a ratio of 7:1).     

Production of an anti-MUC1 C595 dbFv antibody fragment in recombinant Escherichia coli

The production of C595 diabody fragment (dbFv) in Escherichia coli (E. coli) HB2151 clone has been explored. The comparison of fermentation processes mode demonstrated that a higher biomass inoculum operation enhanced C595 dbFv production. It was demonstrated that a concentration of 12.1 mg l⁻¹ broth of dbFv and a cell concentration of 23.6 g l⁻¹ broth were achieved at the end of 75 l fermentation.     

Enhancement of polysaccharide production in suspension cultures of protocorm-like bodies from Dendrobium huoshanense by optimization of medium compositions and feeding of sucrose

A strategy that optimization of medium compositions for maximum biomass followed by feeding of sucrose for maximum polysaccharide synthesis was developed for enhancing polysaccharide production in suspension culture of protocorm-like bodies (PLBs) of Dendrobium huoshanense C.Z. Tang et S.J. Cheng. In growth stage, the original half-strength MS medium was optimized with carbon sources, nitrogen sources and metal ion combinations. The effects of different carbon sources on PLBs growth were remarkable and sucrose at 35 g l⁻¹ was the most suitable. Sole nitrate nitrogen of 30 mmol l⁻¹ was the best for PLBs growth. Metal ions (Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺) showed different influences on PLBs growth. The optimal concentration of Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ was 4.5 mmol l⁻¹, 0.1 mmol l⁻¹, 0.5 mmol l⁻¹ and 0.06 mmol l⁻¹, respectively. In the optimized medium (sucrose, nitrate, Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ concentration as described above, the other component concentration seen in half-strength MS), 33.9 g DW l⁻¹ PLBs were harvested after 30 days of culture and biomass increase was improved 245% as compared with that in the original medium. In production stage, polysaccharide synthesis was significantly improved by the feeding sucrose. The maximum polysaccharide production (22 g l⁻¹) was obtained in the case of 50 g l⁻¹ sucrose feeding at day 30 of culture, which was about 109-fold higher than that in the original medium without feeding of sucrose.