Quantifying Phosphorus Flow Pathways Through Socioeconomic Systems at the County Level in China

Phosphorus (P) is a key factor in aquatic eutrophication, and P contamination has become a common issue worldwide. Many developing countries, including China, have made great efforts in the anti‐P contamination battle. In this article we mainly discuss the P flow in Wuwei, a typical county in China with insufficient wastewater treatment, using the method of static substance flow analysis. We show that characterizing P metabolic pathways and flows at the county level can provide useful information about P pollution. Through complex calculations, we found that Wuwei County released 3,552 metric tons (t) of P into the local aquatic environment in 2008 and that its P load (3.35 kilograms P per capita per year [kg P/cap/yr] or 19.43 kilograms P per hectare per year [kg‐P/ha/yr]) was greater than both the adjoining counties’ and Chaohu City's average levels combined. The agricultural subsystem discharged the largest quantity of P (2,572 t) and had a relatively low production conversion efficiency (32%) and P waste recycling rate (36%). The rural residential and small‐scale livestock breeding systems also accounted for substantial portions of P discharge. Anti‐P contamination efforts should consequently focus on those three subsystems. Based on the results of this case study, we also discuss the feasibility of potential efforts to reduce P contamination.     

Phosphorus Cycling in Montreal’s Food and Urban Agriculture Systems

Cities are a key system in anthropogenic phosphorus (P) cycling because they concentrate both P demand and waste production. Urban agriculture (UA) has been proposed as a means to improve P management by recycling cities’ P-rich waste back into local food production. However, we have a limited understanding of the role UA currently plays in the P cycle of cities or its potential to recycle local P waste. Using existing data combined with surveys of local UA practitioners, we quantified the role of UA in the P cycle of Montreal, Canada to explore the potential for UA to recycle local P waste. We also used existing data to complete a substance flow analysis of P flows in the overall food system of Montreal. In 2012, Montreal imported 3.5 Gg of P in food, of which 2.63 Gg ultimately accumulated in landfills, 0.36 Gg were discharged to local waters, and only 0.09 Gg were recycled through composting. We found that UA is only a small sub-system in the overall P cycle of the city, contributing just 0.44% of the P consumed as food in the city. However, within the UA system, the rate of recycling is high: 73% of inputs applied to soil were from recycled sources. While a Quebec mandate to recycle 100% of all organic waste by 2020 might increase the role of UA in P recycling, the area of land in UA is too small to accommodate all P waste produced on the island. UA may, however, be a valuable pathway to improve urban P sustainability by acting as an activity that changes residents’ relationship to, and understanding of, the food system and increases their acceptance of composting.     

The Characteristics and Trends of Socioeconomic Metabolism in China

China has become the country with the largest resource use and has high levels of waste emissions that pose a great management challenge. To provide more details about environmental problems and to find effective solutions, this article analyzed the scale, structure, and trend of the socioeconomic metabolism in China during the period 1992–2014 based on economy‐wide material flow accounts (EW‐MFA), and predicted resource use during the period of the 13th Five‐Year Plan. The results of this study show that the scale of China's socioeconomic metabolism in China increased more than twofold, during 1992–2014. However, after 2011, with the economic slowdown, the growth rates of total material requirement (TMR), direct material input (DMI), and domestic processed output (DPO) began to decrease. China may reach an inflection point, but this point will probably not be approached before the year 2020. Material recycling (MR) has played an important role in improving resource productivity, improving it by 92.52 renminbi per tonne in 2014. Metallic minerals and fossil fuels are the main sources of hidden flow. Carbon dioxide (CO₂) emissions, construction waste, and agricultural emissions have become the major sources of DPO. Because of the 13th Five‐Year Plan, China may slow the growth rate of DMI and may save 10.26 gigatonnes of resources during 2015–2020. Resource productivity is predicted to increase by 15.91%. Imports and MR may play more important roles. These suggestions are made: (1) strengthening the recycling system; (2) stronger policies, especially in metallic mineral and fossil fuels; (3) developing management systems for CO₂ emissions, construction waste, and agricultural emissions; and (4) adjusting China's economic structure.     

Substance Flow Analysis of Wastes Containing Polybrominated Diphenyl Ethers

The present article examines flows and stocks of Stockholm Convention regulated pollutants, commercial penta‐ and octabrominated diphenyl ether (cPentaBDE, cOctaBDE), on a city level. The goals are to (1) identify sources, pathways, and sinks of these compounds in the city of Vienna, (2) determine the fractions that reach final sinks, and (3) develop recommendations for waste management to ensure their minimum recycling and maximum transfer to appropriate final sinks. By means of substance flow analysis (SFA) and scenario analysis, it was found that the key flows of cPentaBDE stem from construction materials. Therefore, end‐of‐life (EOL) plastic materials used for construction must be separated and properly treated, for example, in a state‐of‐the‐art municipal solid waste (MSW) incinerator. In the case of cOctaBDE, the main flows are waste electrical and electronic equipment (WEEE) and, possibly, vehicles. Most EOL vehicles are exported from Vienna and pose a continental, rather than a local, problem. According to the modeling, approximately 73% of cOctaBDE reached the final sink MSW incinerator, and 17% returned back to consumption by recycling. Secondary plastics, made from WEEE, may thus contain significant amounts of cOctaBDE; however, uncertainties are high. According to uncertainty analysis, the major cause is the lack of reliable values regarding cOctaBDE concentrations in European WEEE categories 3 and 4, including cathode ray tube monitors for computers and televisions. We recommend establishing a new, goal‐oriented data set by additional analyses of waste constituents and plastic recycling samples, as well as establishing reliable mass balances of polybrominated diphenyl ethers’ flows and stocks by means of SFA.     

基于能值理论的有色金属矿产资源开采生态补偿机制

矿产资源为中国经济的高速增长提供了不竭的动力,但在其开采过程中也带来了诸多的环境问题。在当今资源、环境的约束下,如何采取适宜的量化方法来表征矿产资源开采所带来的生态环境损失,并在此基础上确定合理的生态补偿标准,成为了一项重要的研究课题。选取我国有色金属采选业为研究案例,并基于能值分析方法,核算了矿产资源开采过程中造成的直接、间接环境损失,提出了生态补偿指数,用以为生态补偿标准的制定提供参考依据。对能值分析指标的计算和分析结果表明,从可持续发展角度,生态补偿指数为89.18%,说明我国有色金属采选业的环境投入较高,需要的补偿费用较多;能值产出率为9.24,表明有色金属采选业的生产效率高;环境承载率为238,呈现高负荷状态,区域环境所承受的压力巨大;可持续发展指数为0.039,表明我国有色金属采选业处于不可持续状态,急需采取相关环境保护措施进行调整。从经济成本角度,我国有色金属采选业需要的生态环境补偿费用约为4.38×109元,现阶段征收的资源税费远低于生态恢复的治理费用,不能够覆盖生态修复治理成本。最后根据本文研究内容得出我国有色金属采选业面临的主要问题,分别从宏观角度、微观角度及长远角度3个方面给出了相应的政策建议。     

Efforts for a Circular Economy in China: A Comprehensive Review of Policies

Circular economy concepts, practices, and policies are increasingly drawing attention as important means for the pursuit of sustainable development. This article uses a conceptual framework to catalogue and investigate policy efforts for the circular economy in China. Based on the framework, policy prototypes and specific examples are identified: resource‐oriented, production‐oriented, waste, and use‐oriented and life cycle policies. A comprehensive review of 280 related policies shows that China has a long history of resource‐oriented policies and implemented production‐oriented policies very quickly after the year 2000. China's policies toward the circular economy became more comprehensive through time, with a broad engagement of government agencies, an extensive and progressive coverage of recycling opportunities, production initiatives across multiple scales, and use of different policy instruments. The continuous progress has been driven by proactive state actors and their learning from the international society. The current policy framework, however, is concerned more with the means rather than the ends of the circular economy, and relies too much on direct subsidies and other financial incentives. Policy making can be improved by more explicit consideration of the whole production life cycle and use of market‐based policy design.     

Life cycle environmental and economic assessment of lead refining in China

Purpose

Lead is one of the most commonly used metals in the past millennium because of its various properties. Moreover, lead is easy to extract and handle. However, the lead industry often encounters strong public opposition because of lead poisoning. This study analyzes the economic and environmental impacts of lead in China, which is the world’s largest producer and consumer of lead.

Methods

Life cycle assessment coupled with life cycle costing was conducted to estimate the environmental and economic impacts of primary and secondary lead refining in China. The internal cost (i.e., raw materials and energy consumption, labor, tax, interest, transport, infrastructure, depreciation, and maintenance) and external market price (i.e., carbon, ammonia, arsenic, COD, lead, mercury, nitrogen oxides, particulates, sulfur dioxide, and land eco-remediation) are considered.

Results and discussion

The overall environmental burden was mainly generated from the human toxicity and marine ecotoxicity categories for both primary and secondary lead refining scenarios because of the direct lead emission in the air and water. For the primary lead refining, the effect on metal depletion represented an additional dominant contribution to the overall environmental burden. The overall economic impact was mainly attributed to lead ore or waste lead, tax, labor fee, and emission cost of ammonia and chromium. In 2013, approximately 5.61 Mt CO₂ eq, 5.81 Mt 1,4-DB eq, 6.59 kt 1,4-DB eq, 7.86 kt 1,4-DB eq, 1.82 Mt·kg Fe eq, 2.37 Mt·kg oil eq, and $9.9 billion were recorded from the lead industry in China in the climate change, human toxicity, freshwater ecotoxicity, marine ecotoxicity, metal depletion, fossil depletion, and economic impact categories, respectively. Additionally, approximately 0.4 kt lead, 18.4 kt sulfur dioxide, 15.6 kt nitrogen oxide, and 6.4 kt particulate emissions in the same year were released from the lead industry in China.

Conclusions

Approximately 57 to 96 % environmental benefits through waste lead recycling in all key categories were observed, whereas its economic benefit was low. The key factors that contribute in reducing the overall environmental and economic impacts include reducing direct lead emissions in air and water, increasing the national recycling rate of lead, replacing coal with clean energy sources for electricity production, improving heavy metal-removing technologies from mining wastewater, and optimizing the efficiency of electricity, lead ore, coal, oxygen, natural gas, and sodium carbonate consumption.

     

Materials Metabolism Analysis of China's Highway Traffic System (HTS) for Promoting Circular Economy

With the rapid growth of highway mileage and vehicles, the Chinese highway traffic system (HTS) has become one of the great resource consumers. This article attempts to evaluate the material metabolism of China's HTS during 2001–2005 using the approach of material flow analysis (MFA) and to explore possible measures to promote circular economy throughout HTS. We measured a set of indicators to illustrate the whole material metabolism of China's HTS. The results indicated that the direct material input (DMI) of China's HTS increased from 1181.26 million tonnes (Mt) in 2001 to 1,874.57 Mt in 2005, and about 80% of DMI was accumulated in the system as infrastructure and vehicles. The domestic processed output (DPO) increased by 59.0% from 2001 to 2005. Carbon dioxide and solid waste accounted for 80.5% and 10.4% of DPO, respectively. The increase of resource consumption and pollutant emissions kept pace with the growth of transportation turnover. All these suggest that China's HTS still followed an extensive linear developing pattern with large resource consumption and heavy pollution emissions during the study period, which brought great challenges to the resources and the environment. Therefore, it's high time for China to implement a circular economy throughout the HTS by instituting resource and energy savings, by reducing emissions in the field of infrastructure construction and maintenance, by reducing vehicles’ energy and materials consumption, and by recycling waste materials.     

Global Phosphorus Flows in the Industrial Economy From a Production Perspective

Human activity has quadrupled the mobilization of phosphorus (P), a nonrenewable resource that is not fully recycled biologically or industrially. P is accumulated in both water and solid waste due to fertilizer application and industrial, agricultural, and animal P consumption. This paper characterizes the industrial flows, which, although smaller than the agricultural and animal flows, are an important phosphorus source contributing to the pollution of surface waters. We present the quantification of the network of flows as constrained by mass balances of the global annual metabolism of phosphorus, based on global consumption for 2004, all of which eventually ends up as waste and in the soil and water systems. We find that on a yearly basis, 18.9 million metric tons (MMT) of P is produced, of which close to 75% goes to fertilizer and the rest to industrial and others uses. Phosphoric acid is the precursor for many of the intermediate and end uses of phosphate compounds described in this study and accounts for almost 80% of all P consumed. Eventually, all of the P goes to waste: 18.5 MMT ends up in the soil as solid waste, and 1.32 MMT is emissions to air and water. Besides quantifying P flows through our economy, we also consider some possible measures that could be taken to increase the degree of recovery and optimization of this resource and others that are closely related, such as the recovery of sulfur from gypsum and wastewater (sludge), and fluorine from wet phosphoric acid production.     

Estimation of Waste Battery Generation and Analysis of the Waste Battery Recycling System in China

China produces and consumes a large amount of batteries annually, which leads to many waste batteries needing to be recycled. The collection and recycling system of primary, alkaline secondary, and lithium‐ion secondary batteries in China is particularly poor, and waste battery recycling enterprises generally sustain economic losses if they solely use waste batteries as raw materials. Increasing the profits of waste battery recycling systems is a key problem that needs to be considered. This article quantitatively analyzes waste battery generation in China by using annual sales data and probable lifetime distribution of various batteries. The results show that the rapid growth of battery usage has led to an increased generation of waste batteries and the percentage of different types of waste batteries is changing over time. In 2013, the total quantity of all waste batteries in the medium lifetime scenario reached 570 kilotons, of which primary, alkaline secondary, and lithium‐ion secondary waste batteries accounted for approximately 36%, 28%, and 35%, respectively. Based on a real‐world case study of a typical domestic waste battery recycling enterprise in China, material flow analysis and cost‐benefit analysis were conducted to study the development of the recycling process of comingled waste batteries. Through scenario analysis, we conclude that increasing the use of waste batteries as raw materials and the recycling of other materials that are less valuable reduces the profits of the waste battery recycling enterprise. Higher profits can be achieved by adding the production of high value‐added downstream products and government support. At the same time, the essential role of the government in developing a waste battery recycling system was identified. Finally, relevant suggestions are made for improvements in both the government and enterprise sectors.     

Biochar: a potential route for recycling of phosphorus in agricultural residues

Phosphorus (P) is a finite and dwindling resource, while an enormous amount of P flows to agricultural residues with increasing agricultural production. Therefore, the recycling of P in agricultural residues is critical for P sustainability in agricultural systems, which is dominated by the route of direct land application. Biochar production from agricultural residues and its subsequent land application have been suggested as solutions for waste biomass disposal, carbon sequestration, soil amendment/remediation, and crop production promotion. However, little attention has been paid to the contrasting effects of the land application of biochar vs. agricultural residues on the recycling of P accumulated in agricultural residues. Phosphorus in agricultural residues can be retained and transformed into stable forms of P in the resulting biochar. Thus, compared to agricultural residues, biochar provides lower amounts of labile P and releases its P more slowly while providing a long‐lasting P source, and the loss potential of P from biochar is reduced by low mobility of its P, indicating that biochar‐based P recycling route could substantially promote P recycling by acting as sustainable P source and diminishing the loss of P applied to soil.     

A Database to Facilitate a Process‐Oriented Approach to Urban Metabolism

In view of urbanization trends coupled with climate‐change challenges, it is increasingly important to establish less‐harmful means of urban living. To date, urban metabolism (UM) studies have quantified the aggregate material and energy flows into and out of cities and, further, have identified how consumer activity causes these flows. However, little attention has been paid to the networks of conversion processes that link consumer end‐use demands to aggregate metabolic flows. Here, we conduct a systematic literature search to assemble a database of 202 urban energy, water, and waste management processes. We show how the database can help planners and policy makers choose the preferred process to meet a specific resource management need; identify synergies between energy, water, and waste management processes; and compute optimal networks of processes to meet an area's consumer demand at minimum environmental cost. We make our database publicly available under an open‐source license and discuss the possibilities for how it might be used alongside other industrial ecology data sets to enhance research opportunities. This will encourage more holistic UM analyses, which appreciate how both consumer activity and the engineered urban system work together to influence aggregate metabolic flows and thus support efforts to make cities more sustainable.     

Static material flow analysis of neodymium in China

Neodymium is one of the most important enabling materials for next‐generation clean technologies, especially electric vehicles and wind turbines. As the world's largest producer of rare earth minerals, China dominates the global neodymium supply and a considerable amount of primary neodymium resources are from illegal mining. Many studies have been conducted on the material flow of neodymium in different regions, but few studies focus on China. In this study, a static material flow analysis of neodymium is conducted to quantitatively analyze the industrial chain structure of neodymium in China and to calculate the neodymium output from illegal mining. The results quantitatively depict the neodymium material flow of each stage of China's neodymium industrial chain in 2016, which indicates that 12.3–17.0 kt of primary neodymium resources were from illegal mining. On the basis of the results, reasonable conclusions can be drawn that the recycling of neodymium from end‐of‐life products provides an important opportunity to both reduce illegal rare earth mining and cope with increasing neodymium demand.     

Closing the phosphorus cycle in a food system: insights from a modelling exercise

Mineral phosphorus (P) used to fertilise crops is derived from phosphate rock, which is a finite resource. Preventing and recycling mineral P waste in the food system, therefore, are essential to sustain future food security and long-term availability of mineral P. The aim of our modelling exercise was to assess the potential of preventing and recycling P waste in a food system, in order to reduce the dependency on phosphate rock. To this end, we modelled a hypothetical food system designed to produce sufficient food for a fixed population with a minimum input requirement of mineral P. This model included representative crop and animal production systems, and was parameterised using data from the Netherlands. We assumed no import or export of feed and food. We furthermore assumed small P soil losses and no net P accumulation in soils, which is typical for northwest European conditions. We first assessed the minimum P requirement in a baseline situation, that is 42% of crop waste is recycled, and humans derived 60% of their dietary protein from animals (PA). Results showed that about 60% of the P waste in this food system resulted from wasting P in human excreta. We subsequently evaluated P input for alternative situations to assess the (combined) effect of: (1) preventing waste of crop and animal products, (2) fully recycling waste of crop products, (3) fully recycling waste of animal products and (4) fully recycling human excreta and industrial processing water. Recycling of human excreta showed most potential to reduce P waste from the food system, followed by prevention and finally recycling of agricultural waste. Fully recycling P could reduce mineral P input by 90%. Finally, for each situation, we studied the impact of consumption of PA in the human diet from 0% to 80%. The optimal amount of animal protein in the diet depended on whether P waste from animal products was prevented or fully recycled: if it was, then a small amount of animal protein in the human diet resulted in the most sustainable use of P; but if it was not, then the most sustainable use of P would result from a complete absence of animal protein in the human diet. Our results apply to our hypothetical situation. The principles included in our model however, also hold for food systems with, for example, different climatic and soil conditions, farming practices, representative types of crops and animals and population densities.     

LCA application to integrated waste management planning in Gipuzkoa (Spain)

Goal, Scope and Background  Gipuzkoa is a department of the Vasque Country (Spain) with a population of about 700,000 people. By the year 2000 approximately 85% of municipal solid waste in this area was managed by landfilling, and only 15% was recycled. Due to environmental law restrictions and landfill capacity being on its limit, a planning process was initiated by the authorities. LCA was used, from an environmental point of view, to assess 7 possible scenarios arising from the draft Plan for the 2016 time horizon. Main Features  In each scenario, 9 waste flows are analysed: rest waste, paper and cardboard, glass containers, light packaging, organic-green waste, as well as industrial/commercial wood, metals and plastics, and wastewater sludge. Waste treatments range from recycling to energy recovery and landfilling. Results  Recycling of the waste flows separated at the source (paper and cardboard, glass, light packaging, organic-green waste, wood packaging, metals and plastics) results in net environmental benefits caused by the substitution of primary materials, except in water consumption. These benefits are common to the 7 different scenarios analysed. However, some inefficiencies are detected, mainly the energy consumption in collection and transport of low density materials, and water consumption in plastic recycling. The remaining flows, mixed waste and wastewater sludge, are the ones causing the major environmental impacts, by means of incineration, landfilling of partially stabilised organic material, as well as thermal drying of sludge. With the characterisation results, none of the seven scenarios can be clearly identified as the most preferable, although, due to the high recycling rates expected by the Plan, net environmental benefits are achieved in 9 out of 10 impact categories in all scenarios when integrated waste management is assessed (the sum of the 9 flows of waste). Finally, there are no relevant differences between scenarios concerning the number of treatment plants considered. Nevertheless, only the effects on transportation impacts were assessed in the LCA, since the plant construction stage was excluded from the system boundaries. Conclusions  The results of the study show the environmental importance of material recycling in waste management, although the recycling schemes assessed can be improved in some aspects. It is also important to highlight the environmental impact of incineration and landfilling of waste, as well as thermal drying of sludge using fossil fuels. One of the main findings of applying LCA to integrated waste management in Gipuzkoa is the fact that the benefits of high recycling rates can compensate for the impacts of mixed waste and wastewater sludge. Recommendations and Outlook  Although none of the scenarios can be clearly identified as the one having the best environmental performance, the authorities in Gipuzkoa now have objective information about the future scenarios, and a multidisciplinary panel could be formed in order to weight the impacts if necessary. In our opinion, LCA was successfully applied in Gipuzkoa as an environmental tool for decision making.     

食物源CNP的城市代谢特征——以厦门市为例

基于元素流分析原理,将食物源碳氮磷3种元素在城市系统中的代谢特征进行耦合分析,追踪以"食物消费"、"废物处置"、"人体代谢"为主要环节的食物碳氮磷代谢过程,发掘其中共同的代谢环节,明晰3种元素代谢路径、代谢通量及其影响因素的差异,并对厦门市1991—2010年食物源碳氮磷城市代谢进行案例分析。结果表明,食物源碳氮磷城市代谢中通量最大的代谢路径是"食物—食物摄入—人体粪尿—未还田粪尿—污水处理—污泥—污泥填埋—土壤";食物源碳氮磷城市代谢主要引起土壤和水体的环境负荷加重;厨余垃圾中碳氮磷占食物源的比例分别为13.7%、32.2%、70.3%,在整个代谢过程中具有最大的减量管理潜力。提出优化代谢过程、减少碳氮磷环境负荷的若干对策建议,包括增大食物的有效食用比例、资源化利用污泥和厨余垃圾等。     

Statistical entropy analysis to evaluate resource efficiency: Phosphorus use in Austria

In a resource efficient economy, entropy generation must be kept low and high-entropy wastes should be transformed into low-entropy recycled products, thus saving natural resources. Based on this idea, statistical entropy analysis (SEA) was put forward as a method to evaluate material flow systems with respect to their ability to concentrate or dilute a substance throughout its life cycle using a single metric, relative statistical entropy (RSE). Whereas its application has so far been restricted to highly aggregated material flow systems or to assessments at plant or process level, in the present study the SEA method was adapted to assess the efficiency of resource use in material flow systems which consist of numerous resource flows and include multiple recycling loops. Phosphorus (P) use in Austria served as a case study to illustrate SEA-based resource efficiency assessment for different scenarios and over time. The evaluation enabled exploiting the outcomes of existing P flow studies in a straightforward way and produced additional insights related to the characteristics of resource use within the system. Changes in P management over time had a significant effect on the resource efficiency of P use. The RSE increased by 40% due to P use in Austria in the year 2000 compared to an increase of 30% in 2010. The generally favorable trend of statistical entropy (lower dissipation) in 2010 could be attributed mainly to lower dissipative emissions, more efficient bio-industry, and increasing P removal rates in waste water treatment, which overcompensated the negative impact of the ban of recycling of meat and bone meal (in 2001) on P use efficiency. Further, the SEA-based assessment applied to a scenario of optimized P management reflected the positive effects of measures to reduce emissions, enhance recycling, and reduce consumption of P on resource efficiency (50% lower RSE increase in the target system compared to the original state). In synthesis, this study shows that the SEA method is able to integrate various dimensions of resource use into a single indicator, which can serve as a basis to assess and improve the resource efficiency of macro-scale material flow systems.     

Abfallverwertung nach dem Vorbild der Natur: Versuche zur mikrobiellen Kompostierung

The substance circles represent a perfect recycling just as required by sophisticated, environment‐oriented waste management concepts and the substance management act. Environmental education at schools also focuses an the topic of recycling, and attempts — via imparting the necessary technical knowledge — to establish the readiness for the separation of useful matter by sorts (e.g.biodegradable waste) among students and pupils. The access to the topic of biodegradable waste composting is supported by praxis‐oriented experiments. The article depicts the types of experiments by which the metabolism activity of microorganisms can be proved (“Selbsterhitzungsexperiment” = “self‐heat‐up experiment”) and the microbial disintegration of biogenic materials can be made visible respectively (“Diarähmchentest” = “slide‐frame‐test”). Thus, these simple and inexpensive student experiments are being compared to experiments from research praxis. On the basis of transparencies from biodegradable substances, “Latex” products (condoms)and peels of citric fruits (natural conservation substances), the question of whether or not such materials belong into the trash‐can for biodegradable waste can be answered in a praxis‐oriented way.     

Unravelling the anthropogenic pathways of phosphorus in the food production and consumption system of Bangladesh through the lens of substance flow analysis

Phosphorus (P) is central to food production. Current understanding about the global phosphorus system is dominated by studies in wealthier nations where soil fertility, fertilizer supply chains, and agronomic tracking have long been established. In contrast, developing nations are experiencing major agricultural transitions and the associated phosphorus flows remain a significant knowledge gap. We compiled and analyzed several years of recent agricultural datasets for Bangladesh, currently the eighth most populous nation, using substance flow analysis for phosphorus. From 2000 to 2016, rice production increased by >50% and remained the dominant crop with remarkably higher phosphorus flow (49.96 kt in 2016) than all other crops. Phosphorus content of livestock products in 2016 exceeded 6.00 kt, more than double in the year 2000, driven primarily by phosphorus in milk and secondarily in meat/eggs. These agricultural changes coincided with a doubling of national phosphorus fertilizer consumption since 2000, a fourfold increase since the global food crisis (2009), and a pronounced rise in the phosphorus import dependency ratio, which was the highest among all countries compared. In turn, during 2010s fertilizer phosphorus use exceeded phosphorus as food + feed production leading to soil phosphorus accumulation, and loss as burned manure became one of the largest phosphorus flows in the entire system, equivalent to half of fertilizer use. This dramatic reconfiguration of the Bangladesh phosphorus system illustrates an important case of agricultural expansion and intensification that is still playing out, with similar situations occurring in developing nations where population growth rates are high, and access to commercial fertilizers has risen.     

A covering model application on Chinese industrial hazardous waste management based on integer program method

Industrial hazardous waste is a special kind of toxic substance, which poses risks to the environment as well as human health. With the speeding up of industrialization in China, the collecting, recycling, treatment and disposal of industrial hazardous waste gradually become a severe problem to both the environmental protection and the resource management. In this paper, we laid an emphasis on prospective optimization, used integer program method, and selected the optimal locating approach to the collecting and handling of industrial hazardous waste on the basis of covering location model. We also selected an industrial intensive district in Hebei Province in China as an empirical object and examined our model result. Compared to previous results, this one bears the characteristics of immediacy, dynamism and predictability.